Search Results

Search found 6517 results on 261 pages for 'reverse dns'.

Page 124/261 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Accessing C$ over LAN on Win2008R2 - cannot by hostname but can by IP and FQDN

  - by Idgoo

  Having an issue with one of our Win2k8 R2 file servers. Trying to access C$ or the Admin share is giving us an error (see error details that the bottom), however we are able to connect using the server's IP and FQDN. can access \\172.16.x.x\c$ with domain cred can access \\server.domain.local\c$ with domain creds cannot access \\servername\c$ with same domain creds Server pings fine with Hostname, IP, FQDN, the Primary DNS suffix is also correct. DNS, PTR and Wins records are all correct for the Server I have checked that I am not trying to connect with cached credentials in the Windows vault, the server is also appending primary and connection specific DNS suffixes to the hostname. Any ideas what might be causing this issue? Error Details: c$ is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions

  Read the article

• Eliminate single point of failure for webservers?

  - by George Bailey

  I know in DNS, that each of the DNS servers will be tried to see if they will respond I know in email that in the event of a failure it will go to the next one in the list or it will hold the mail for a period of time As far as I know,, in webservers,, the browser will get one of the webserver IP addresses and try it and if it fails it will give up. Is this correct? If so,, then the only way to direct traffic away from a failed IP address would be with the DNS servers.. and even that would not update immediately?

  Read the article

• Is it possible to cause email to my domain to be handled by gmail?

  - by pitosalas

  [This is a very narrow question, and I don't think it is covered in similar sounding questions] I want to configure my server's DNS so that when someone sends email to [email protected] it is actually deliver it to [email protected] Note: My question is whether this is possible to do ONLY with DNS not with myserver.com's own sendmail. I think the answer is "NO" it is not possible, because when I add an MX record to DNS the email that was delivered to gmail's SMPT server would be TO: [email protected] and it would not know that account. (But I hasten to add that I am just vaguely starting to grok how this all works.)

  Read the article

• Setting Up DHCP Server as Failover

  - by Jason Buhagiar

  I have 2 Domain Controllers running at my company; DC1 has the following roles; ADDS DNS DHCP Scope - 192.168.2.100 - 192.168.2.240 DC2 has the following roles; ADDS - Replicated DNS - Secondary DNS I also have 2 PFSense Gateways both have a different ISP Connection, DHCP Relay is not enabled on any of the machines. Can anyone suggest a way for me to install DHCP Server as FAilover on DC2 please, should I use split scope etc... Help is much appreciated :) Thanks.

  Read the article

• Intel Corporation Ethernet Connection does not start properly

  - by Oscar Alejos

  I'm experiencing some problems when trying to connect my PC to the router through a switch. When the PC is directly connected to the router, everything works fine, Ubuntu (14.04) starts normally, and the Internet connection runs inmediately. The Ethernet controller is the Intel Corporation Ethernet Connection, as lspci returns: $ lspci | grep Eth 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) However, when I try to connect through the switch what I get is the following. dmesg returns: $ dmesg | grep eth [ 1.035585] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.035587] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a7:be:5d [ 1.035589] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.035625] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.357838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.165574] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.641287] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.715086] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 16.715090] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO [ 16.715117] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready It looks like eth0 is properly working. Actually, nm-tool returns: $ nm-tool - Device: eth0 [Conexión cableada] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: 00:22:4D:A7:BE:5D Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.30 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 80.58.61.250 DNS: 80.58.61.254 DNS: 192.168.1.1 However, ping returns: $ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. From 192.168.1.30 icmp_seq=1 Destination Host Unreachable From 192.168.1.30 icmp_seq=2 Destination Host Unreachable From 192.168.1.30 icmp_seq=3 Destination Host Unreachable The connection is restored by restarting it: # ifconfig eth0 down # ifconfig eth0 up From this point on, everything runs smoothly, as if the PC were directly connected to the router. It seems to be an issue related to the integrated LAN adaptor and the Ethernet controller, since my laptop connects without any problem. My desktop board is an Intel DB85FL. I'd be grateful if anyone could give some ideas on how to solve this issue. Thank you in advance.

  Read the article

• Step by Step Install of MAAS and JUJU

  - by John S

  I am working on understanding the pieces that I am missing in being able to deploy Juju across the other MAAS nodes. I don't know If I have a step out of place, or missing a few. The server owns the router which handles the DHCP and DNS. Any assistance is greatly appreciated. When I am at the end I will either get a 409 error, or arbitrary pick tools 1.16.0 error. It is worth mentioning that local, and aws works fine. Hopefully with all of these steps spelled out it will help someone else along the way too. Steps Setting Up MAAS and JUJU - 12.04 LTS Clean install SSH only from the package selection during install sudo apt-get install software-properties-common sudo apt-get install python-software-properties sudo add-apt-repository ppa:maas-maintainers/stable sudo add-apt-repository ppa:juju/stable sudo apt-get update sudo apt-get dist-upgrade sudo reboot sudo apt-get install maas maas-dns maas-dhcp sudo ufw disable sudo reboot - edit /etc/dhcp/dhcpd.conf authoritive subnet 10.0.0.0 netmask 255.255.255.0 { next-server 10.0.0.2; filename "pxelinux.0"; } sudo maas createsuperuser sudo maas-import-pxe-files Login to MAAS http://10.x.x.x/MAAS cluster controller configuration for eth0 manage dhcp and dns IP 10.0.0.2 subnet 255.255.255.0 broadcast 10.0.0.0 routerip 10.0.0.1 ip low 10.0.0.5 ip high 10.0.0.180 Commissioning default and distro is set at 12.04 default domain is at local sudo maas-cli login maas http://10.x.x.x/MAAS/api/1.0 api-key ssh-keygen -t rsa -b 2048 - enter - no password - cat id_rsa.pub and enter key into MAAS ssh sudo maas-cli maas nodes accept-all (interestingly enough I only get back [] when executing this ) PXE one machine, accept and commision, start and deploy. sudo apt-get install juju-core juju-local MAAS config: maas: type: maas maas-server: '://10.x.x.x:80/MAAS' maas-oauth: 'MAAS_API_KEY' admin-secret: 'nothing' default-series: 'precise' juju switch maas sudo juju bootstrap --show-log

  Read the article

• How to use Nginx to export the mongoDB connection?

  - by Totty

  I have on my server 2 things: the node.js server and a mongodb database; The node.js server is reachable from myip/server; and now I would like to export the mongodb database to myip/database for example. Now when I use my mongodb viewer (MongoVUE) with "http://myip/database:9000" (the port 9000 is set in nginx and it's also the port that I start mongod). If I go to "http://myip/database:9000" or "http://myip/database" in a browser it look like: "You are trying to access MongoDB on the native driver port. For http diagnostic access, add 1000 to the port number". But in MongoVUE it says: Unable to connect to server 192.168.1.16/database:9000: No such host is known. Type: MongoDB.Driver.MongoConnectionException Stack: at MongoDB.Driver.Internal.DirectConnector.Connect(TimeSpan timeout) at MongoDB.Driver.MongoServer.Connect(TimeSpan timeout, ConnectWaitFor waitFor) at MongoDB.Driver.MongoServer.Connect(TimeSpan timeout) at MongoDB.Driver.MongoServer.Connect() at MangoUI.MMongo.FQlxNlJKqO74gYmXgZR4(Object ) at MangoUI.MMongo.Open(Boolean useSamus) at MangoUI.MMongo.Open() at MangoUI.ComNavTree.wJQdUqApCpjoC39P59n(Object ) at MangoUI.ComNavTree.ExpandMe(MTreeNode expand) at MangoUI.ComNavTree.tree_BeforeExpand(Object sender, TreeViewCancelEventArgs e) No such host is known Type: System.Net.Sockets.SocketException Stack: at System.Net.Dns.GetAddrInfo(String name) at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6) at System.Net.Dns.GetHostAddresses(String hostNameOrAddress) at MongoDB.Driver.MongoServerAddress.ToIPEndPoint(AddressFamily addressFamily) at MongoDB.Driver.MongoServerInstance.Connect(Boolean slaveOk) at MongoDB.Driver.Internal.DirectConnector.Connect(TimeSpan timeout)

  Read the article

• Cannot ping router with a static IP assigned?

  - by Uriah

  Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

  Read the article

• /etc/resolv.conf nameserver fd00::1

  - by user88631

  My /etc/resolv.conf constantly get a mysterious entry, i run a home network with ipv6 provided by ravd, the interface is auto-configured by Network manager (all name server lookups are lost when this line is first in my /etc/resolv.conf) . Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) **# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN** nameserver fd00::1 nameserver 192.168.1.1 search home.int When ping is working cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.1.1 search home.int So something is putting fd00::1 at start of file, not if I ping6 fd00::1 I get Destination unreachable: Administratively prohibited To diagnose this I ran the router with single cable to connected to ubuntu machine. Ran tcpdump + restarted network on ubuntu. "tcpdump ip6 -e -i eth0 | grep fd00" finds nothing, it's not being advertised via the network.. The only hit I got was when an upstream router refused a connection attempt from the ubuntu machine to fd00::1. I have also switched on debug for network manager & it appears to set the mystery line.. 15:22:14 storage-pc NetworkManager[349]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. 15:22:14 storage-pc NetworkManager[349]: <warn> dnsmasq exited with error: Other problem (5) 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281528] [nm-dns-manager.c:598] update_dns(): updating resolv.conf 15:22:14 storage-pc NetworkManager[349]: <debug> [1346822534.281875] [nm-dns-manager.c:719] update_dns(): DNS: plugin dnsmasq ignored (caching disabled) 15:22:14 storage-pc NetworkManager[349]: <info> ((null)): writing resolv.conf to /sbin/resolvconf 15:22:14 storage-pc dbus[2184]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' 15:22:14 storage-pc dnsmasq[2875]: reading /etc/resolv.conf 15:22:14 storage-pc dnsmasq[2875]: using nameserver 192.168.1.1#53 15:22:14 storage-pc dnsmasq[2875]: using nameserver fd00::1#53 Any suggestions on how to find out where this comes from?

  Read the article

• Domain transfer and New Hosting Management

  - by Anubhav Saini

  I wanted to migrate from my older registrar to GoDaddy. Main reason because current registrar/hosting provider doesn't support .NET. My old registrar gave me control over the domain and hosting account. So, basically I have everything I would need. ( I know theory only ) I applied for Transfer of domain, bought a hosting package from GoDaddy and uploaded new web site. So, I am waiting for domain transfer and it tells me that I have to wait for 5-7 days for approval. Okay. But today, my old registrar told/taunted me that I really didn't need to apply for transfer. What could possibly I have done differently? My domain expires on this 15th. Now I don't know much about how all of this really works, but I am guessing he meant, "you should have waited for 15 days and let it expire after which you should buy the domain as it is expired". Is it really so(I doubt) or there are some other ways I could have got same result but without transferring domain? (like, changing DNS entries) I have read like all of the documentation available on namecheap/GoDaddy/Whois about domain transfers. But maybe because I am new to this it is all confusing to me. I would also like to know what to do with DNS settings after transfer succeeds. I want to kill the old website. So, what nameserver settings I need to change, new one or old one or both? I have old host+old domain registrar + old working site on one hand, on the other hand, new site + pending domain transfer + new DNS settings.

  Read the article

• Ditch cPanel / WHM in favour of manual seup

  - by BWRic

  We currently use cPanel / WHM on a reseller account but are looking at getting a dedicated server. My first thought was to duplicate this set up on the dedicated box to allow us to quickly create new accounts. I'll be a managed server so they'll have set up the LAMP stack. I'm curious if I actually need cPanel and WHM. We don't use many of the features from cPanel / WHM, just creating accounts and databases, clients do not have FTP access. I'm no sys admin and come from a Windows / GUI background but have some knowledge in setting up development servers. WHM: Creating accounts I presume this sets up the Apache virtual host, FTP access and DNS settings. I've some knowledge of editing the Apache files to create virtual hosts. Am I correct in thinking as long as the DNS is pointing to the server IP and the virtual host is configured the server can serve the (php) pages? I'm not sure I need per site FTP access as only we will have access so I could have a server wide/htdocs only access to view all the site. The company who supply the dedicated hosts would also provide the own DNS management tool so I'm not need to cPanel one. MySQL: Creating users and databases We use cPanel to create the MySQL users and databases. As it's a dedicated box and I can have root access I think this could be replaced by SQLyog for db management and phpMyAdmin for user management. Do you I need cPanel or can I get by editing a few text files for creating the accounts, then use the MySQL tools for databases? Or am I missing something major with how the sites are configured?

  Read the article

• Are webhosts that require NS instead of a CNAME common?

  - by billpg

  I've just signed up with a webhost (which I prefer not to name) and I'm reasonably happy with it. The only nit was when I was ready to put a site online and I asked the support line to what name I should point my 'www' CNAME to. They responded that they don't do that and I need to set my domain's NS records for the hosting to work. "Why would you ever want to do it that way? Our service to you includes DNS and our servers are probably much better than the one your registrar provides." This was a bit of surprise as all of the other webhosts I've worked with happily support this. I've set up (eg) gallery.myfriend.example for friends by having them configure their DNS to CNAME 'gallery' to the name of a shared server at a webhost and the webhost does name-based hosting for 'gallery.myfriend.example'. (Of course, if the webhost ever tells me I'm being moved from A.webhost.example to B.webhost.example, it would be my responsibility to change where the CNAME points. Really good webhosts would instead create myname.webhost.example for the IP of whichever server my stuff happens to be on, so I'd never have to worry about keeping my CNAME up to date.) Is my impression correct, that most webhosts will happily support a service that begins with a CNAME hosted elsewhere, or is it really more common that webhosts will only provide a service if they control the DNS service too?

  Read the article

• How far should one take e-mail address validation?

  - by Mike Tomasello

  I'm wondering how far people should take the validation of e-mail address. My field is primarily web-development, but this applies anywhere. I've seen a few approaches: simply checking if there is an "@" present, which is dead simply but of course not that reliable. a more complex regex test for standard e-mail formats a full regex against RFC 2822 - the problem with this is that often an e-mail address might be valid but it is probably not what the user meant DNS validation SMTP validation As many people might know (but many don't), e-mail addresses can have a lot of strange variation that most people don't usually consider (see RFC 2822 3.4.1), but you have to think about the goals of your validation: are you simply trying to ensure that an e-mail address can be sent to an address, or that it is what the user probably meant to put in (which is unlikely in a lot of the more obscure cases of otherwise 'valid' addresses). An option I've considered is simply giving a warning with a more esoteric address but still allowing the request to go through, but this does add more complexity to a form and most users are likely to be confused. While DNS validation / SMTP validation seem like no-brainers, I foresee problems where the DNS server/SMTP server is temporarily down and a user is unable to register somewhere, or the user's SMTP server doesn't support the required features. How might some experienced developers out here handle this? Are there any other approaches than the ones I've listed? Edit: I completely forgot the most obvious of all, sending a confirmation e-mail! Thanks to answerers for pointing that one out. Yes, this one is pretty foolproof, but it does require extra hassle on the part of everyone involved. The user has to fetch some e-mail, and the developer needs to remember user data before they're even confirmed as valid.

  Read the article

• Open Source Highlight: namebench

  - by eddraper

  DNS is a big deal.  Even small incremental changes to improve its performance can yield significant value due to the vast quantity of look-ups required when using the internet.  Until now, It’s always been one of those things I had to kinda take on faith… was my ISP doing a good job?  Are those public DNS server really that much faster?  What about security and privacy concerns? Let me introduce you to namebench.  This is the kinda tool I really love – one that immediately delivers value and is almost over-the-top OCD in its attention to detail. Trust me, this tool is utterly ruthless in it’s quest for getting it right – you’re not left with a big question mark after it presents its data.  The results are conclusive and actionable.  Here’s what is does: It hunts down the fastest DNS servers from your desktop that it can find using thousands of requests.  No, it doesn’t pop up this little dialog in 10 seconds to give you some “off the cuff” answer from a handful of providers.  It takes the better part of 10-15 minutes to run.  When it finishes, it presents you with a veritable horn-o-plenty of data.  Mean response duration, response distribution, bad data,  no stone is left un-turned. Check it out.  You’ll dig it.

  Read the article

• Problem in domain name of site in google search [on hold]

  - by Jayadratha Mondal

  My domain provider dont supports advanced DNS at this moment. So I have used iframe to forward to my webserver. Suppose my domain abc.com have a simple html which is opening xyz.com via Iframe. Google was showing abc.com on the search. But from last two days it is showing xyz.com, other things like description, name of the site are ok only the domain changed to xyz.com, but I want to show abc.com. When I'm typing the full domain then google showing the domain as I want. But If I type a part or any keyword then it showing that xyz.com. Anyone have any idea how to show abc.com again? EDIT: I dont know the domain name provider because its not mine. When I'm trying to set new A record its showing that "you need advanced dns to do this currently you are using simple DNS". I'm doing this from cpanel. Normally as per I know there are 3 sections. 1 domain name 2 A record 3Cname. But I dont have any domain name section.

  Read the article

• DHCP settings out of range Internet shuts off after a few minutes

  - by user263115

  I recently upgraded from windows eight to windows 8.1 I do not know if this has anything to do with anything I have a 64 bit OS. My Internet goes off by itself every 5 minutes even though my wireless icon at the lower right of the screen still shows connected I had an error message in the last event in it said that might DHCP settings were out of range. I get my internet at my house through a wireless portable hotspot through my smart phone. But i haven't ever had any problems before and i only have this problem on this network. If i turn airplane mode on and reset my network card, the internet will come back to life but soon die. i don't experience this problem while on a different network or if i'm on WiFi. This s really annoying please help Windows IP Configuration Host Name . . . . . . . . . . . . : NastyMcnastyJr Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TeamViewer VPN Adapter Physical Address. . . . . . . . . : 00-FF-5D-13-26-21 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter Physical Address. . . . . . . . . : F6-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter SAMMY McNASTY: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter Physical Address. . . . . . . . . : F4-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::3107:66bc:cf1f:c776%4(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.43.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Friday, November 1, 2013 9:50:20 PM Lease Expires . . . . . . . . . . : Saturday, November 2, 2013 12:56:46 AM Default Gateway . . . . . . . . . : 192.168.43.1 DHCP Server . . . . . . . . . . . : 192.168.43.1 DHCPv6 IAID . . . . . . . . . . . : 83146722 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-F1-98-B4-20-89-84-84-61-BB DNS Servers . . . . . . . . . . . : 192.168.43.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Ethernet: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 20-89-84-84-61-BB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/26/2013 7:52:23 PM Event ID: 20003 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management has concluded the process to add Service vwifibus for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0. Event Xml: 20003 0 4 7005 0 0x8000000000000000 5118 System NastyMcnastyJr vwifibus \SystemRoot\system32\DRIVERS\vwifibus.sys PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 false true 0 Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/19/2013 3:29:12 PM Event ID: 20001 Task Category: (7005) Level: Information Keywords: User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management concluded the process to install driver netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0x0. Event Xml: 20001 0 4 7005 0 0x8000000000000000 2015 System NastyMcnastyJr netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf 6.30.223.102 Microsoft PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 {4D36E972-E325-11CE-BFC1-08002BE10318} false false false 0x0 Broadcom 802.11n Network Adapter Log Name: System Source: Microsoft-Windows-DNS-Client Date: 11/2/2013 12:24:59 AM Event ID: 1014 Task Category: (1014) Level: Warning Keywords: (268435456) User: NETWORK SERVICE Computer: NastyMcnastyJr Description: Name resolution for the name www.google.com timed out after none of the configured DNS servers responded. Event Xml: 1014 0 3 1014 0 0x4000000010000000 34771 System NastyMcnastyJr www.google.com 128 02000000C0A82B01000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

  Read the article

• Long pause when accessing DFS namespace

  - by Matt

  We've recently migrated our Windows network to use DFS for shared files. DFS is working well, except for one annoying problem: users experience a significant delay when they try to access a DFS namespace that they have not accessed for some time. I have tried to troubleshoot the issue but have not had any success so far, and I was hoping someone here may have some pointers to help resolve the problem. Firstly, some background on our network: The network uses a Windows 2008 functional level Active Directory domain with two Windows 2008 DCs and two DNS servers (one on each of the DCs). The network is DNS only - no WINS. All computers are located at the same site and connected by Gigabit Ethernet. We have approximately 20 Domain-based DFS namespaces in Windows 2008 mode, and each DFS namespace has two Windows 2008 DFS namespace servers (the same two servers for all namespaces). All namespace servers are in FQDN mode and all folder targets are specified using their FQDN. All computers are up-to-date with Service Packs and patches. The actual folder targets (i.e. the SMB shares our DFS folders point to) are scattered across several file and application servers, all running Windows 2008 bar two application servers which run Windows 2003 R2, with no replication setup at all (e.g. all DFS folders currently only have one folder target). Some more detail on the problem: The namespace access delay is generally 1 - 10 seconds long and seems to occur when a particular computer has not accessed the requested namespace for approximately five minutes or more. For example, if the user has not accessed \\domain.name\namespace1\ for more than five minutes and attempts to access \\domain.name\namespace1\ via Windows Explorer, the Explorer window will freeze for 1 - 10 seconds before finally resuming and displaying the folders that exist in \\domain.name\namespace1. If they then close the Explorer window and attempt to access \\domain.name\namespace1\ again within five minutes the contents will be displayed almost instantly - if they wait longer than five minutes it will go through the 1 - 10 second pause again. Once "inside" the namespace everything is nice and snappy, it's just the initial connection to the namespace that is slow. The browsing delays seem to affect all variants of Windows that we use (Windows 2008 x64 SP2, Windows 2003 R2 x86 SP2, Windows XP Pro x86 SP3) - it is possibly a bit worse in Windows XP / 2003 than in Windows 2008, but I'm not sure if the difference isn't just psychological. Accessing the underlying folder targets directly exhibits no delay at all - i.e. if the SMB shares pointed to by DFS are accessed directly (bypassing DFS) then there is no pause. During trouble-shooting I noticed that the "Cache duration" for all of our DFS roots is set to 300 seconds - 5 minutes. Given that this is the same amount of time required to trigger the pause I assume that this caching is somehow related, although I am unsure exactly what is cached on the client and hence what needs to be looked up again after 5 minutes have elapsed. In trying to resolve the problem I have already tried / checked the following (without success): Run dcdiag on both Domain Controllers - no problems found Done some basic DNS server checks without finding any problems - I don't know how to check the DNS servers in detail, but I would add that the network is not exhibiting any other strange behavior that may point to a DNS problem Disabled Anti-virus on clients and servers Removing one of the namespace servers from a couple of namespaces - no difference So that's where I'm up to - and I'm out of ideas. Can anyone suggest what may be causing the delays and/or what I should be trying next?

  Read the article

• What programming Language Would you learn to Re-engineer USB Devices? [closed]

  - by user70113

  Currently Work in IT support and am retraining in electrical engineering / electronics, I am also interested in Reverse Engineering which language would be best for Hardware RE, I have seen a few sources say C, C++ and Python? I am not familiar with Linux, but installed Ubuntu to learn with. I am not a programmer. Far from it. But, I can understand enough basic VB,Java and PHP to edit it for simple things. One of my immediate projects would be to learn to reverse engineer USB devices and write my own low level drivers. I know there are porting kits, but I really want to know it from the ground up. Thanks for any advise folks Most Appreciated.

  Read the article

• Need help about Drag a sprite with Animation (Cocos2d)

  - by Zishan

  I want to play an animation when someone drag a sprite from it's default position to another selected position. If he drag half of the selected position then animation will be play half. Example, I have 15 Frames of a animation and have a projectile arm. The projectile arm can be rotate maximum 30°, if someone rotate the arm 2° then animation sprite will be show 2nd frame, if rotate 12° then animation sprite will be show 6th frame.... and so on. Also when he release the arm, then the arm will be reverse back to it's default position and animation frames also will be reverse back to it's default first frame. I am new on cocos2d.I know how to make an animation and how to drag a sprite but I have no idea how to do this. Can anyone Please give me any idea or any tutorial how to do this, it will be very helpful for me. Thank you in advance.

  Read the article

• Wise settings for Git

  - by Marko Apfel

  These settings reflecting my Git-environment. It a result of reading and trying several ideas of input from others. Must-Haves Aliases [alias] ci = commit st = status co = checkout oneline = log --pretty=oneline br = branch la = log --pretty=\"format:%ad %h (%an): %s\" --date=short df = diff dc = diff --cached lg = log -p lol = log --graph --decorate --pretty=oneline --abbrev-commit lola = log --graph --decorate --pretty=oneline --abbrev-commit --all ls = ls-files ign = ls-files -o -i --exclude-standard Colors [color] ui = auto [color "branch"] current = yellow reverse local = yellow remote = green [color "diff"] meta = yellow bold frag = magenta bold old = red bold new = green bold whitespace = red reverse [color "status"] added = green changed = red untracked = cyan Core [core] autocrlf = true excludesfile = c:/Users/<user>/.gitignore editor = 'C:/Program Files (x86)/Notepad++/notepad++.exe' -multiInst -notabbar -nosession –noPlugin Nice to have Merge and Diff [merge] tool = kdiff3 [mergetool "kdiff3"] path = c:/Program Files (x86)/KDiff3/kdiff3.exe [mergetool "p4merge"] path = c:/Program Files (x86)/Perforce Merge/p4merge.exe cmd = p4merge \"$BASE\" \"$LOCAL\" \"$REMOTE\" \"$MERGED\" keepTemporaries = false trustExitCode = false keepBackup = false [diff] guitool = kdiff3 [difftool "kdiff3"] path = c:/Program Files (x86)/KDiff3/kdiff3.exe [difftool "p4merge"] path = C:/Users/<user>/My Applications/Perforce Merge/p4merge.exe cmd = \"p4merge.exe $LOCAL $REMOTE\" .

  Read the article

• Habanero

  - by csharp-source.net

  An Enterprise Application Framework for .Net that is ideally suited for developing applications in an agile manner. The framework is used for producing an application from the data layer through to the front-end. Free open source under the LGPL license, it includes ORM, code generation and runtime UI generation to create one application for the desktop & web. Features: * ORM: Map database tables to objects in code * Persist property values to and from the database * Define all mapping in a single XML file * Switch between database vendors with one setting * Support for MySQL, MS Sql Server, MS Access, Oracle, PostgreSQL, SQLite, Firebird * FireStarter GUI class definitions xml manager * Generate user interfaces and map properties to controls * Develop for both desktop (with Windows Forms) and web (with Gizmox' Visual WebGUI) * Generate new projects and code files * Generate UI forms from templates * Reverse engineer class definitions from existing databases * Support variable data sources, including an in-memory database. Ships with Firestarter a free database reverse engineering, Domain Modelling and Code Generator.

  Read the article

• Email from my new vps is marked as spam

  - by Chriswede

  I got a new vps from x10vps (x10hosting) and set up the domain via cloudflare. This is what the email looks like: Delivered-To: [email protected] Received: by 10.64.19.240 with SMTP id i16csp357708iee; Tue, 9 Oct 2012 01:29:48 -0700 (PDT) Received: by 10.50.57.130 with SMTP id i2mr908846igq.56.1349771387599; Tue, 09 Oct 2012 01:29:47 -0700 (PDT) Return-Path: <[email protected]> Received: from power.SOURCEAPE.COM ([198.91.90.116]) by mx.google.com with ESMTPS id v8si25630942ica.46.2012.10.09.01.29.46 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 09 Oct 2012 01:29:47 -0700 (PDT) Received-SPF: temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) client-ip=198.91.90.116; Authentication-Results: mx.google.com; spf=temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) [email protected] Received: from nk11p03mm-asmtp010.mac.com ([17.158.232.169]:54276) by power.SOURCEAPE.COM with esmtp (Exim 4.80) (envelope-from <[email protected]>) id 1TLVBD-0004Ig-1Y for [email protected]; Tue, 09 Oct 2012 12:28:43 +0400 I then tried to enable SPF and DKIM and got following massage In order to ensure that SPF or DKIM takes effect, you must confirm that this server is an authoritative nameserver for chvw.de. If you need help, contact your hosting provider. Status: Enabled Warning: cPanel is unable to verify that this server is an authoritative nameserver for chvw.de. [?] and the email header now looks like this: Delivered-To: [email protected] Received: by 10.50.183.227 with SMTP id ep3csp14506igc; Tue, 9 Oct 2012 01:55:23 -0700 (PDT) Received: by 10.50.40.133 with SMTP id x5mr992934igk.32.1349772923717; Tue, 09 Oct 2012 01:55:23 -0700 (PDT) Return-Path: <[email protected]> Received: from power.SOURCEAPE.COM ([198.91.90.116]) by mx.google.com with ESMTPS id ng8si25688859icb.42.2012.10.09.01.55.23 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 09 Oct 2012 01:55:23 -0700 (PDT) Received-SPF: temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) client-ip=198.91.90.116; Authentication-Results: mx.google.com; spf=temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) [email protected]; dkim=neutral (bad format) [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=chvw.de; s=default; h=Message-ID:Subject:To:From:Date:Content-Transfer-Encoding:Content-Type:MIME-Version; bh=iugsx3Lx0KnqjR7dj3wyQHnJ9pe/z3ntYEVk80k8rx4=; b=IrYsCtHdoPubXVOvLqxd7sLE/TyQTS5P3OrEg5SSUSKnQQcQ/fWWyBrmsrgkFSsw6jCmmRWMDR09vH5bQRpFPMA57B7pf8QRKhwXOWFBV+GnVUqICsfRjnNPvhx/lNp5; Received: from localhost ([127.0.0.1]:46539 helo=direct.chvw.de) by power.SOURCEAPE.COM with esmtpa (Exim 4.80) (envelope-from <[email protected]>) id 1TLVb0-0004dZ-Kd for [email protected]; Tue, 09 Oct 2012 12:55:22 +0400

  Read the article

• OCP - "New Ways to Flash Back"

  Reverse transactions and track historical changes in Oracle Database 11g.

  Read the article

• How do I control an animation with a drag command?

  - by Zishan

  I want to play an animation when someone drags a sprite from it's default position to another selected position. If they drag half of the selected position then animation will be play half. For example, I have 15 frames of a animation for a projectile arm. The projectile arm can be rotated a maximum of 30°, if someone rotates the arm 2° then the animation sprite should show the 2nd frame, if rotated 12° then the animation sprite should show the 6th frame.... and so on. Also when they release the arm, the arm will be reverse back to it's default position and animation frames also will be reverse back to the default first frame. I am new on cocos2D. I know how to make an animation and how to drag a sprite but I have no idea how to combine them. Can anyone give me an idea or any tutorial on how to do this?

  Read the article

• List all versions of a package

  - by askb

  Is there a equivalent of this command; yum list kernel-headers --showduplicates on Ubuntu with apt-get, apt-cache etc. The above command lists various versions of the kernel-headers rpm available on F20/RHEL or installations. Closet I can get using apt-cache showpkg, not sure if there is a better way ? $ apt-cache showpkg linux-image Package: linux-image Versions: Reverse Depends: firmware-crystalhd,linux-image systemtap,linux-image fiaif,linux-image Dependencies: Provides: Reverse Provides: linux-image-3.13.0-27-lowlatency 3.13.0-27.50 linux-image-3.13.0-27-generic 3.13.0-27.50 linux-image-3.13.0-24-lowlatency 3.13.0-24.47 linux-image-3.13.0-24-generic 3.13.0-24.47 linux-image-3.13.0-24-lowlatency 3.13.0-24.46 linux-image-3.13.0-24-generic 3.13.0-24.46 Expecting similar output: $ yum list kernel-headers --showduplicates Loaded plugins: langpacks, refresh-packagekit Installed Packages kernel-headers.x86_64 3.11.10-301.fc20 @fedora Available Packages kernel-headers.x86_64 3.11.10-301.fc20 fedora kernel-headers.x86_64 3.14.4-200.fc20 updates This would help me simply do a downgrade or upgrade to a specific version.

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >