Search Results

Search found 3864 results on 155 pages for 'split'.

Page 123/155 | < Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >

• How would you go about parsing markdown?

  - by John Leidegren

  You can find the syntax here. The thing is, the source that follows with the download is written in perl. Which I have no intentions of honoring. It is riddled with regex and it relies on MD5 hashes to escape certain characters. Something is just wrong about that! I'm about to hard code a parser for markdown and I'm wonder if someone had some experience with this? Edit: If you don't have anything meaningful to say about the actual parsing of markdown, spare me the time. (This might sound harsh, but yes, I'm looking for insight, not a solution i.e. third-party library). To help a bit with the answers, regex are meant to identify patterns! NOT to parse an entire grammar. That people consider doing so is foobar. If you think about markdown, it's fundamentally based around the concept of paragraphs. As such, a reasonable approach might be to split the input into paragraphs. There are many kinds of paragraphs e.g. heading, text, list, blockquote, code. The challenge is thus to identify these paragraphs and in what context they occur. I'll be back with a solution, once I find it's worthy to be shared.

  Read the article

• How should I handle this Optimistic Concurrency error in this Entity Framework code, I have?

  - by Pure.Krome

  Hi folks, I have the following pseduo code in some Repository Pattern project that uses EF4. public void Delete(int someId) { // 1. Load the entity for that Id. If there is none, then null. // 2. If entity != null, then DeleteObject(..); } Pretty simple but I'm getting a run-time error:- ConcurrencyException: Store, Update, Insert or Delete statement affected an unexpected number of rows (0). Now, this is what is happening :- Two instances of EF4 are running inthe app at the same time. Instance A calls delete. Instance B calls delete a nano second later. Instance A loads the entity. Instance B also loads the entity. Instance A now deletes that entity - cool bananas. Instance B tries to delete the entity, but it's already gone. As such, the no-count or what not is 0, when it expected 1 .. or something like that. Basically, it figured out that the item it is suppose to delete, didn't delete (because it happened a split sec ago). I'm not sure if this is like a race-condition or something. Anyways, is there any tricks I can do here so the 2nd call doesn't crash? I could make it into a stored procedure.. but I'm hoping to avoid that right now. Any ideas? I'm wondering If it's possible to lock that row (and that row only) when the select is called ... forcing Instance B to wait until the row lock has been relased. By that time, the row is deleted, so when Instance B does it's select, the data is not there .. so it will never delete.

  Read the article

• Partial Classes - are they bad design?

  - by dferraro

  Hello, I'm wondering why the 'partial class' concept even exists in .NET. I'm working on an application and we are reading a (actually very good) book relavant to the development platform we are implementing at work. In the book he provides a large code base /wrapper around the platform API and explains how he developed it as he teaches different topics about the platform development. Anyway, long story short - he uses partial classes, all over the place, as a way to fake multiple inheritence in C# (IMO). Why he didnt just split the classes up into multiple ones and use composition is beyond me. He will have 3 'partial class' files to make up his base class, each w/ 3-500 lines of code... And does this several times in his API. Do you find this justifiable? If it were me, I'd have followed the S.R.P. and created multiple classes to handle different required behaviors, then create a base class that has instances of these classes as members (e.g. composition). Why did MS even put partial class into the framework?? They removed the ability to expand/collapse all code at each scope level in C# (this was allowed in C++) because it was obviously just allowing bad habits - partial class is IMO the same thing. I guess my quetion is: Can you explain to me when there would be a legitimate reason to ever use a partial class? I do not mean this to be a rant / war thread. I'm honeslty looking to learn something here. Thanks

  Read the article

• Authentication using cookie key with asynchronous callback

  - by greg

  I need to write authentication function with asynchronous callback from remote Auth API. Simple authentication with login is working well, but authorization with cookie key, does not work. It should checks if in cookies present key "lp_login", fetch API url like async and execute on_response function. The code almost works, but I see two problems. First, in on_response function I need to setup secure cookie for authorized user on every page. In code user_id returns correct ID, but line: self.set_secure_cookie("user", user_id) does't work. Why it can be? And second problem. During async fetch API url, user's page has loaded before on_response setup cookie with key "user" and the page will has an unauthorized section with link to login or sign on. It will be confusing for users. To solve it, I can stop loading page for user who trying to load first page of site. Is it possible to do and how? Maybe the problem has more correct way to solve it? class BaseHandler(tornado.web.RequestHandler): @tornado.web.asynchronous def get_current_user(self): user_id = self.get_secure_cookie("user") user_cookie = self.get_cookie("lp_login") if user_id: self.set_secure_cookie("user", user_id) return Author.objects.get(id=int(user_id)) elif user_cookie: url = urlparse("http://%s" % self.request.host) domain = url.netloc.split(":")[0] try: username, hashed_password = urllib.unquote(user_cookie).rsplit(',',1) except ValueError: # check against malicious clients return None else: url = "http://%s%s%s/%s/" % (domain, "/api/user/username/", username, hashed_password) http = tornado.httpclient.AsyncHTTPClient() http.fetch(url, callback=self.async_callback(self.on_response)) else: return None def on_response(self, response): answer = tornado.escape.json_decode(response.body) username = answer['username'] if answer["has_valid_credentials"]: author = Author.objects.get(email=answer["email"]) user_id = str(author.id) print user_id # It returns needed id self.set_secure_cookie("user", user_id) # but session can's setup

  Read the article

• String Manipulation: Splitting Delimitted Data

  - by Milli Szabo

  I need to split some info from a asterisk delimitted data. Data Format: NAME*ADRESS LINE1*ADDRESS LINE2 Rules: 1. Name should be always present 2. Address Line 1 and 2 might not be 3. There should be always three asterisks. Samples: MR JONES A ORTEGA*ADDRESS 1*ADDRESS2* Name: MR JONES A ORTEGA Address Line1: ADDRESS 1 Address Line2: ADDRESS 2 A PAUL*ADDR1** Name: A PAUL Address Line1: ADDR1 Address Line2: Not Given My algo is: 1. Iterate through the characters in the line 2. Store all chars in a temp variables until first * is found. Reject the data if no char is found before first occurence of asterisk. If some chars found, use it as the name. 3. Same as step 2 for finding address line 1 and 2 except that this won't reject the data if no char is found My algo looks ugly. The code looks uglier. Spliting using //* doesn't work either since name can be replaced with address line 1 if the data was *Address 1*Address2. Any suggestion?

  Read the article

• bash: listing files in date order, with spaces in filenames

  - by Jason Judge

  I am starting with a file containing a list of hundreds of files (full paths) in a random order. I would like to list the details of the ten latest files in that list. This is my naive attempt: ls -las -t `cat list-of-files.txt` | head -10 That works, so long as none of the files have spaces in, but fails if they do as those files are split up at the spaces and treated as separate files. I have tried quoting the files in the original list-of-files file, but the here-document still splits the files up at the spaces in the filenames. The only way I can think of doing this, is to ls each file individually (using xargs perhaps) and create an intermediate file with the file listings and the date in a sortable order as the first field in each line, then sort that intermediate file. However, that feels a bit cumbersome and inefficient (hundreds of ls commands rather than one or two). But that may be the only way to do it? Is there any way to pass "ls" a list of files to process, where those files could contain spaces - it seems like it should be simple, but I'm stumped.

  Read the article

• Python Regular Expressions: Capture lookahead value (capturing text without consuming it)

  - by Lattyware

  I wish to use regular expressions to split words into groups of (vowels, not_vowels, more_vowels), using a marker to ensure every word begins and ends with a vowel. import re MARKER = "~" VOWELS = {"a", "e", "i", "o", "u", MARKER} word = "dog" if word[0] not in VOWELS: word = MARKER+word if word[-1] not in VOWELS: word += MARKER re.findall("([%]+)([^%]+)([%]+)".replace("%", "".join(VOWELS)), word) In this example we get: [('~', 'd', 'o')] The issue is that I wish the matches to overlap - the last set of vowels should become the first set of the next match. This appears possible with lookaheads, if we replace the regex as follows: re.findall("([%]+)([^%]+)(?=[%]+)".replace("%", "".join(VOWELS)), word) We get: [('~', 'd'), ('o', 'g')] Which means we are matching what I want. However, it now doesn't return the last set of vowels. The output I want is: [('~', 'd', 'o'), ('o', 'g', '~')] I feel this should be possible (if the regex can check for the second set of vowels, I see no reason it can't return them), but I can't find any way of doing it beyond the brute force method, looping through the results after I have them and appending the first character of the next match to the last match, and the last character of the string to the last match. Is there a better way in which I can do this? The two things that would work would be capturing the lookahead value, or not consuming the text on a match, while capturing the value - I can't find any way of doing either.

  Read the article

• howto distinguish composition and self-typing use-cases

  - by ayvango

  Scala has two instruments for expressing object composition: original self-type concept and well known trivial composition. I'm curios what situations I should use which in. There are obvious differences in their applicability. Self-type requires you to use traits. Object composition allows you to change extensions on run-time with var declaration. Leaving technical details behind I can figure two indicators to help with classification of use cases. If some object used as combinator for a complex structure such as tree or just have several similar typed parts (1 car to 4 wheels relation) than it should use composition. There is extreme opposite use case. Lets assume one trait become too big to clearly observe it and it got split. It is quite natural that you should use self-types for this case. That rules are not absolute. You may do extra work to convert code between this techniques. e.g. you may replace 4 wheels composition with self-typing over Product4. You may use Cake[T <: MyType] {part : MyType} instead of Cake { this : MyType => } for cake pattern dependencies. But both cases seem counterintuitive and give you extra work. There are plenty of boundary use cases although. One-to-one relations is very hard to decide with. Is there any simple rule to decide what kind of technique is preferable? self-type makes you classes abstract, composition makes your code verbose. self-type gives your problems with blending namespaces and also gives you extra typing for free (you got not just a cocktail of two elements but gasoline-motor oil cocktail known as a petrol bomb). How can I choose between them? What hints are there? Update: Let us discuss the following example: Adapter pattern. What benefits it has with both selt-typing and composition approaches?

  Read the article

• Programmatically added SummaryLinkWebPart doesn't display Links

  - by Mac

  Hi All, I am using below code to Add SummaryLinkWebPart to a Page and also adding few links to that wehbpart. I can see the webpart now on the page but it doesn't have any links inside it. Does anyone know what is wrong with the code? SPLimitedWebPartManager wpm = web.GetLimitedWebPartManager("Pages/default.aspx",PersonalizationScope.Shared); SummaryLinkWebPart slwp = new SummaryLinkWebPart(); for (int counter = 0; counter < list.ItemCount; counter++) { urlField = list.Items[counter]["URL"].ToString().Split(','); SummaryLink link = new SummaryLink(urlField[1].Trim()); slwp.SummaryLinkValue.SummaryLinks.Add(link); slwp.SummaryLinkValue.SummaryLinks[counter].OpenInNewWindow = true; slwp.SummaryLinkValue.SummaryLinks[counter].LinkUrl = urlField[0].Trim(); slwp.SummaryLinkValue.SummaryLinks[counter].Description = urlField[1]; slwp.Style = "Image on left"; Console.WriteLine(link.LinkUrl + link.Title); } wpm.AddWebPart(slwp, lvwp.ZoneID, slwp.ZoneIndex + 1);

  Read the article

• Is there stl and utf8 friendly C++ Wrapper for ICU, or other powerful unicode library

  - by artyom

  Hello, I need a good Unicode library for C++. I need Transformations in Unicode sensitive way. For example sort all strings in case insensitive way and get their first characters for index. Convert to upper and to lower various Unicode strings. Split text in reasonable position -- words that would work for Chinese and Japanese as well. Formatting numbers, dates in locale sensitive way (should be thread safe). Transparent support of utf8 (primary internal representation). As far as I know the best library is ICU. However, I can't find normal developer friendly API documentation with examples. Also as far as I see, it is not too friendly with modern C++ design, work with STL and so on. Like this std::string msg; unistring umsg.from_utf8(msg); unistring::word_iterator wi; for(wi=umsg.words().begin(),n=0;wi!=usmg.words().wi_end(),n<10;++wi,++n) ; msg=umsg.substr(umsg.words().begin(),wi).to_utf8(); cout<<_("Five 10 words are ")<<msg; Does anybody know good STL friendly ICU wrapper released under Open Source license preferred permissive like MIT or Boost, but others LGPLv2 compatible are ok as well. Is there another high quality library similar to ICU? Platform: UNIX/POSIX, Windows support is not required. Thanks, Artyom Edit: Unfortunatly I wasn't logged in so I can't make asnver accepted... I had attached the ansver by myself.

  Read the article

• Advanced tasks using Web.Config transformation

  - by dcadenas

  Does anyone know if there is a way to "transform" specific sections of values instead of replacing the whole value or an attribute? For example, I've got several appSettings entries that specify the Urls for different webservices. These entries are slightly different in the dev environment than the production environment. Some are less trivial than others <!-- DEV ENTRY --> <appSettings> <add key="serviceName1_WebsService_Url" value="http://wsServiceName1.dev.domain.com/v1.2.3.4/entryPoint.asmx" /> <add key="serviceName2_WebsService_Url" value="http://ma1-lab.lab1.domain.com/v1.2.3.4/entryPoint.asmx" /> </appSettings> <!-- PROD ENTRY --> <appSettings> <add key="serviceName1_WebsService_Url" value="http://wsServiceName1.prod.domain.com/v1.2.3.4/entryPoint.asmx" /> <add key="serviceName2_WebsService_Url" value="http://ws.ServiceName2.domain.com/v1.2.3.4/entryPoint.asmx" /> </appSettings> So far, I know I can do something like this in the Web.Release.Config: <add xdt:Locator="Match(key)" xdt:Transform="SetAttributes(value)" key="serviceName1_WebsService_Url" value="http://wsServiceName1.prod.domain.com/v1.2.3.4/entryPoint.asmx" /> <add xdt:Locator="Match(key)" xdt:Transform="SetAttributes(value)" key="serviceName2_WebsService_Url" value="http://ws.ServiceName2.domain.com/v1.2.3.4/entryPoint.asmx" /> However, everytime the Version for that webservice is updated, I would have to update the Web.Release.Config as well, which defeats the purpose of simplfying my web.config updates. I know I could also split that URL into different sections and update them independently, but I rather have it all in one key. I've looked through the available web.config Transforms but nothings seems to be geared towars what I am trying to accomplish. These are the websites I am using as a reference: Vishal Joshi's blog, MSDN Help, and Channel9 video Any help would be much appreciated! -D

  Read the article

• Switching textstorage of NSTextViews back and forth

  - by Jakob Dam Jensen

  I'm trying to make a feature in a product which gives the user the ability to split a textview into two. The way this is done is by removing the textview from it's superview, making a NSSplitView and adding the textview as well as a new NSTextView instance to this splitview. Lastly I make these two textviews share the same textstorage in order to make them share the same content. It works great. But the problem is when I want to make one of the two textviews change textstorage. The replaceTextStorage method in NSLayoutManager causes both NSTextView to change textStorage. The API documentation states: replaceTextStorage: All NSLayoutManager objects sharing the original NSTextStorage object then share the new one. This method makes all the adjustments necessary to keep these relationships intact, unlike setTextStorage:. So it makes sense that it would do this. But the question is how do I make it possible to have two (or more) textviews first share the same storage and after that having them using their own? I've tried replacing the layoutManager and even making new instances of NSTextViews but no luck... Any suggestions?

  Read the article

• Save memory in Python. How to iterate over the lines and save them efficiently with a 2million line

  - by skyl

  I have a tab-separated data file with a little over 2 million lines and 19 columns. You can find it, in US.zip: http://download.geonames.org/export/dump/. I started to run the following but with for l in f.readlines(). I understand that just iterating over the file is supposed to be more efficient so I'm posting that below. Still, with this small optimization, I'm using 10% of my memory on the process and have only done about 3% of the records. It looks like, at this pace, it will run out of memory like it did before. Also, the function I have is very slow. Is there anything obvious I can do to speed it up? Would it help to del the objects with each pass of the for loop? def run(): from geonames.models import POI f = file('data/US.txt') for l in f: li = l.split('\t') try: p = POI() p.geonameid = li[0] p.name = li[1] p.asciiname = li[2] p.alternatenames = li[3] p.point = "POINT(%s %s)" % (li[5], li[4]) p.feature_class = li[6] p.feature_code = li[7] p.country_code = li[8] p.ccs2 = li[9] p.admin1_code = li[10] p.admin2_code = li[11] p.admin3_code = li[12] p.admin4_code = li[13] p.population = li[14] p.elevation = li[15] p.gtopo30 = li[16] p.timezone = li[17] p.modification_date = li[18] p.save() except IndexError: pass if __name__ == "__main__": run()

  Read the article

• How to get the actual address of a pointer in C?

  - by Airjoe

  BACKGROUND: I'm writing a single level cache simulator in C for a homework assignment, and I've been given code that I must work from. In our discussions of the cache, we were told that the way a small cache can hold large addresses is by splitting the large address into the position in the cache and an identifying tag. That is, if you had an 8 slot cache but wanted to store something with address larger than 8, you take the 3 (because 2^3=8) rightmost bits and put the data in that position; so if you had address 22 for example, binary 10110, you would take those 3 rightmost bits 110, which is decimal 5, and put it in slot 5 of the cache. You would also store in this position the tag, which is the remaining bits 10. One function, cache_load, takes a single argument, and integer pointer. So effectively, I'm being given this int* addr which is an actual address and points to some value. In order to store this value in the cache, I need to split the addr. However, the compiler doesn't like when I try to work with the pointer directly. So, for example, I try to get the position by doing: npos=addr%num_slots The compiler gets angry and gives me errors. I tried casting to an int, but this actually got me the value that the pointer was pointing to, not the numerical address itself. Any help is appreciated, thanks!

  Read the article

• BitShifting with BigIntegers in Java

  - by ThePinkPoo

  I am implementing DES Encryption in Java with use of BigIntegers. I am left shifting binary keys with Java BigIntegers by doing the BigInteger.leftShift(int n) method. Key of N (Kn) is dependent on the result of the shift of Kn-1. The problem I am getting is that I am printing out the results after each key is generated and the shifting is not the expected out put. The key is split in 2 Cn and Dn (left and right respectively). I am specifically attempting this: "To do a left shift, move each bit one place to the left, except for the first bit, which is cycled to the end of the block. " It seems to tack on O's on the end depending on the shift. Not sure how to go about correcting this. Results: c0: 11110101010100110011000011110 d0: 11110001111001100110101010100 c1: 111101010101001100110000111100 d1: 111100011110011001101010101000 c2: 11110101010100110011000011110000 d2: 11110001111001100110101010100000 c3: 1111010101010011001100001111000000 d3: 1111000111100110011010101010000000 c4: 111101010101001100110000111100000000 d4: 111100011110011001101010101000000000 c5: 11110101010100110011000011110000000000 d5: 11110001111001100110101010100000000000 c6: 1111010101010011001100001111000000000000 d6: 1111000111100110011010101010000000000000 c7: 111101010101001100110000111100000000000000 d7: 111100011110011001101010101000000000000000 c8: 1111010101010011001100001111000000000000000 d8: 1111000111100110011010101010000000000000000 c9: 111101010101001100110000111100000000000000000 d9: 111100011110011001101010101000000000000000000 c10: 11110101010100110011000011110000000000000000000 d10: 11110001111001100110101010100000000000000000000 c11: 1111010101010011001100001111000000000000000000000 d11: 1111000111100110011010101010000000000000000000000 c12: 111101010101001100110000111100000000000000000000000 d12: 111100011110011001101010101000000000000000000000000 c13: 11110101010100110011000011110000000000000000000000000 d13: 11110001111001100110101010100000000000000000000000000 c14: 1111010101010011001100001111000000000000000000000000000 d14: 1111000111100110011010101010000000000000000000000000000 c15: 11110101010100110011000011110000000000000000000000000000 d15: 11110001111001100110101010100000000000000000000000000000

  Read the article

• how to display my list with n amount on each line in Python

  - by user1786698

  im trying to display my list with 7 states on each line here is what i have so far, but it displays as one long string of all the states with quotes around each state. I forgot to mention that this is for my CS class and we havent learned iter yet so we not allowed to use it. the only hint i was given was to to turn STATE_LIST into a string then use '\n' to break it up state = str(STATE_LIST) displaystates = Text(Point(WINDOW_WIDTH/2, WINDOW_HEIGHT/2), state.split('\n')) displaystates.draw(win) and STATE_LIST looks like this STATE_VOTES = { "AL" : 9, # Alabama "AK" : 3, # Alaska "AZ" : 11, # Arizona "AR" : 6, # Arkansas "CA" : 55, # California "CO" : 9, # Colorado "CT" : 7, # Connecticut "DE" : 3, # Delaware "DC" : 3, # Washington DC "FL" : 29, # Florida "GA" : 16, # Georgia "HI" : 4, # Hawaii "ID" : 4, # Idaho "IL" : 20, # Illinois "IN" : 11, # Indiana "IA" : 6, # Iowa "KS" : 6, # Kansas "KY" : 8, # Kentucky "LA" : 8, # Louisiana "ME" : 4, # Maine "MD" : 10, # Maryland "MA" : 11, # Massachusetts "MI" : 16, # Michigan "MN" : 10, # Minnesota "MS" : 6, # Mississippi "MO" : 10, # Missouri "MT" : 3, # Montana "NE" : 5, # Nebraska "NV" : 6, # Nevada "NH" : 4, # New Hampshire "NJ" : 14, # New Jersey "NM" : 5, # New Mexico "NY" : 29, # New York "NC" : 15, # North Carolina "ND" : 3, # North Dakota "OH" : 18, # Ohio "OK" : 7, # Oklahoma "OR" : 7, # Oregon "PA" : 20, # Pennsylvania "RI" : 4, # Rhode Island "SC" : 9, # South Carolina "SD" : 3, # South Dakota "TN" : 11, # Tennessee "TX" : 38, # Texas "UT" : 6, # Utah "VT" : 3, # Vermont "VA" : 13, # Virginia "WA" : 12, # Washington "WV" : 5, # West Virginia "WI" : 10, # Wisconsin "WY" : 3 # Wyoming } STATE_LIST = sorted(list(STATE_VOTES.keys())) I am trying to get it to look somewhat like this

  Read the article

• Mysql Database Question about Large Columns

  - by murat

  Hi, I have a table that has 100.000 rows, and soon it will be doubled. The size of the database is currently 5 gb and most of them goes to one particular column, which is a text column for PDF files. We expect to have 20-30 GB or maybe 50 gb database after couple of month and this system will be used frequently. I have couple of questions regarding with this setup 1-) We are using innodb on every table, including users table etc. Is it better to use myisam on this table, where we store text version of the PDF files? (from memory usage /performance perspective) 2-) We use Sphinx for searching, however the data must be retrieved for highlighting. Highlighting is done via sphinx API but still we need to retrieve 10 rows in order to send it to Sphinx again. This 10 rows may allocate 50 mb memory, which is quite large. So I am planning to split these PDF files into chunks of 5 pages in the database, so these 100.000 rows will be around 3-4 million rows and couple of month later, instead of having 300.000-350.000 rows, we'll have 10 million rows to store text version of these PDF files. However, we will retrieve less pages, so again instead of retrieving 400 pages to send Sphinx for highlighting, we can retrieve 5 pages and it will have a big impact on the performance. Currently, when we search a term and retrieve PDF files that have more than 100 pages, the execution time is 0.3-0.35 seconds, however if we retrieve PDF files that have less than 5 pages, the execution time reduces to 0.06 seconds, and it also uses less memory. Do you think, this is a good trade-off? We will have million of rows instead of having 100k-200k rows but it will save memory and improve the performance. Is it a good approach to solve this problem and do you have any ideas how to overcome this problem? The text version of the data is used only for indexing and highlighting. So, we are very flexible. Thanks,

  Read the article

• Using nohup mysqldump from php script is inserting a '!' and breaking to a new line.

  - by Aglystas

  I'm trying to run a mysqldump from php using the nohup command to prevent the script from hanging. Here's the command (The database is mc6_erik_test, everything else is just a table list until you get to the end) exec("mysqldump -u root -pPassword -h vfmy1-dev.mountainmedia.com mc6_erik_test access_log admin affiliate affiliate_2_product authorized_ip category category_2_product claim_code claim_code_log country_exclude customer customer_2_subscription customer_account_log customer_address customer_bill customer_discount customer_ip customer_key email_bulk_log email_draft email_queue email_queue_log email_template endicia_log gift_wrap image_bulk_upload log mailing_list manufacturer merchant merchant_checkout merchant_ip merchant_ship merchant_ship_conf new_account_temp order_dest order_item order_item_2_dest order_item_2_package order_item_log order_item_registrant order_note order_package order_package_label orders package package_2_product pref product product_2_supplier product_also product_event_date product_image product_option product_related product_review product_review_helpful product_ship_disable report search_log subscription supplier temp_product transaction_account transactions wish_list wish_list_fill wish_list_item --opt --where='merchant_id=\'6\'' /tmp/sync_db_card_20100519105358.sql"); As you can see it's really long, because I have to specifically include only the tables I want to dump. The command works great from the command line, however when I run it through a web script towards the end the following is being used as the command... supplier temp_product transaction_account transactio! ns wish_list wish_list_fill wish_list_item --opt --where='merchant_id="6"' > /tmp/sync_db_card_20100519105358.sql So the table 'transactions' is being split by an exclamation point and newline. The rest of the command is exactly the same. And if I run this through the php-cli interface it doesn't happen only when I try running it via the webserver using nohup. I'm wondering if there is some inherit string length to using the exec command within a php script, or really if anyone has any general idea what is going on here.

  Read the article

• User preferences using SQL and JavaScript

  - by Shyam

  Hi, I am using Server Side JavaScript - yes, I am actually using Server Side JavaScript. To complexify things even more, I use Oracle as a backend database (10g). With some crazy XSLT and mutant-like HTML generation, I can build really fancy web forms - yes, I am aware of Rails and other likewise frameworks and I choose the path of horror instead. I have no JQuery or other fancy framework at my disposal, just plain ol' JavaScript that should be supported by the underlying engine called Mozilla Rhino. Yes, it is insane and I love it. So, I have a bunch of tables at my disposal and some of them are filled with associative keys that link to values. As I am a people pleaser, I want to add some nifty user-preference driven solutions. My users have all an unique user_id and this user_id is available during the entire session. My initial idea is to have a user preference table, where I have "three" columns: user_id, feature and pref_string. Using a delimiter, such as : or - (haven't thought about a suitable one yet), I could like store a bunch of preferences as a list and store its elements inside an array using the .split-method (similar like the PHP-explode function). The feature column could be like the table name or some identifier for the "feature" i want to link preferences too. I hate hardcoding objects, especially as I want to be able to back these up and reuse this functionality application-wide. Of course I would love better ideas, just keep in mind I cannot just add a library that easily. These preferences could be like "joined" to the table, so I can query it and use its values. I hope it doesn't sounds too complex, because well.. its basically something really simple I need. Thanks!

  Read the article

• Searching a column containing CSV data in a MySQL table for existence of input values

  - by Adarsh R

  Hi, I have a table say, ITEM, in MySQL that stores data as follows: ID FEATURES -------------------- 1 AB,CD,EF,XY 2 PQ,AC,A3,B3 3 AB,CDE 4 AB1,BC3 -------------------- As an input, I will get a CSV string, something like "AB,PQ". I want to get the records that contain AB or PQ. I realized that we've to write a MySQL function to achieve this. So, if we have this magical function MATCH_ANY defined in MySQL that does this, I would then simply execute an SQL as follows: select * from ITEM where MATCH_ANY(FEAURES, "AB,PQ") = 0 The above query would return the records 1, 2 and 3. But I'm running into all sorts of problems while implementing this function as I realized that MySQL doesn't support arrays and there's no simple way to split strings based on a delimiter. Remodeling the table is the last option for me as it involves lot of issues. I might also want to execute queries containing multiple MATCH_ANY functions such as: select * from ITEM where MATCH_ANY(FEATURES, "AB,PQ") = 0 and MATCH_ANY(FEATURES, "CDE") In the above case, we would get an intersection of records (1, 2, 3) and (3) which would be just 3. Any help is deeply appreciated. Thanks

  Read the article

• Collapsing data frame by selecing one row per group

  - by jkebinger

  I'm trying to collapse a data frame by removing all but one row from each group of rows with identical values in a particular column. In other words, the first row from each group. For example, I'd like to convert this > d = data.frame(x=c(1,1,2,4),y=c(10,11,12,13),z=c(20,19,18,17)) > d x y z 1 1 10 20 2 1 11 19 3 2 12 18 4 4 13 17 Into this: x y z 1 1 11 19 2 2 12 18 3 4 13 17 I'm using aggregate to do this currently, but the performance is unacceptable with more data: > d.ordered = d[order(-d$y),] > aggregate(d.ordered,by=list(key=d.ordered$x),FUN=function(x){x[1]}) I've tried split/unsplit with the same function argument as here, but unsplit complains about duplicate row numbers. Is rle a possibility? Is there an R idiom to convert rle's length vector into the indices of the rows that start each run, which I can then use to pluck those rows out of the data frame?

  Read the article

• How to hand-over a TCP listening socket with minimal downtime?

  - by Shtééf

  While this question is tagged EventMachine, generic BSD-socket solutions in any language are much appreciated too. Some background: I have an application listening on a TCP socket. It is started and shut down with a regular System V style init script. My problem is that it needs some time to start up before it is ready to service the TCP socket. It's not too long, perhaps only 5 seconds, but that's 5 seconds too long when a restart needs to be performed during a workday. It's also crucial that existing connections remain open and are finished normally. Reasons for a restart of the application are patches, upgrades, and the like. I unfortunately find myself in the position that, every once in a while, I need to do this kind of thing in production. The question: I'm looking for a way to do a neat hand-over of the TCP listening socket, from one process to another, and as a result get only a split second of downtime. I'd like existing connections / sockets to remain open and finish processing in the old process, while the new process starts servicing new connectinos. Is there some proven method of doing this using BSD-sockets? (Bonus points for an EventMachine solution.) Are there perhaps open-source libraries out there implementing this, that I can use as is, or use as a reference? (Again, non-Ruby and non-EventMachine solutions are appreciated too!)

  Read the article

• adapting combination code for larger list

  - by vbNewbie

  I have the following code to generate combinations of string for a small list and would like to adapt this for a large list of over 300 string words.Can anyone suggest how to alter this code or to use a different method. Public Class combinations Public Shared Sub main() Dim myAnimals As String = "cat dog horse ape hen mouse" Dim myAnimalCombinations As String() = BuildCombinations(myAnimals) For Each combination As String In myAnimalCombinations 'Look on the Output Tab for the results! Console.WriteLine("(" & combination & ")") Next combination Console.ReadLine() End Sub Public Shared Function BuildCombinations(ByVal inputString As String) As String() 'Separate the sentence into useable words. Dim wordsArray As String() = inputString.Split(" ".ToCharArray) 'A plase to store the results as we build them Dim returnArray() As String = New String() {""} 'The 'combination level' that we're up to Dim wordDistance As Integer = 1 'Go through all the combination levels... For wordDistance = 1 To wordsArray.GetUpperBound(0) 'Go through all the words at this combination level... For wordIndex As Integer = 0 To wordsArray.GetUpperBound(0) - wordDistance 'Get the first word of this combination level Dim combination As New System.Text.StringBuilder(wordsArray(wordIndex)) 'And all all the remaining words a this combination level For combinationIndex As Integer = 1 To wordDistance combination.Append(" " & wordsArray(wordIndex + combinationIndex)) Next combinationIndex 'Add this combination to the results returnArray(returnArray.GetUpperBound(0)) = combination.ToString 'Add a new row to the results, ready for the next combination ReDim Preserve returnArray(returnArray.GetUpperBound(0) + 1) Next wordIndex Next wordDistance 'Get rid of the last, blank row. ReDim Preserve returnArray(returnArray.GetUpperBound(0) - 1) 'Return combinations to the calling method. Return returnArray End Function End Class

  Read the article

• How to sort HashSet() function data in sequence?

  - by vincent low

  I am new to Java, the function I would like to perform is to load a series of data from a file, into my hashSet() function. the problem is, I able to enter all the data in sequence, but I can't retrieve it out in sequence base on the account name in the file. Can anyone help? below is my code: public Set retrieveHistory(){ Set dataGroup = new HashSet(); try{ File file = new File("C:\\Documents and Settings\\vincent\\My Documents\\NetBeansProjects\\vincenttesting\\src\\vincenttesting\\vincenthistory.txt"); BufferedReader br = new BufferedReader(new FileReader(file)); String data = br.readLine(); while(data != null){ System.out.println("This is all the record:"+data); Customer cust = new Customer(); //break the data based on the , String array[] = data.split(","); cust.setCustomerName(array[0]); cust.setpassword(array[1]); cust.setlocation(array[2]); cust.setday(array[3]); cust.setmonth(array[4]); cust.setyear(array[5]); cust.setAmount(Double.parseDouble(array[6])); cust.settransaction(Double.parseDouble(array[7])); dataGroup.add(cust); //then proced to read next customer. data = br.readLine(); } br.close(); }catch(Exception e){ System.out.println("error" +e); } return dataGroup; } public static void main(String[] args) { FileReadDataModel fr = new FileReadDataModel(); Set customerGroup = fr.retrieveHistory(); System.out.println(e); for(Object obj : customerGroup){ Customer cust = (Customer)obj; System.out.println("Cust name :" +cust.getCustomerName()); System.out.println("Cust amount :" +cust.getAmount()); }

  Read the article

• Segmentation in Linux : Segmentation & Paging are redundant?

  - by claws

  Hello, I'm reading "Understanding Linux Kernel". This is the snippet that explains how Linux uses Segmentation which I didn't understand. Segmentation has been included in 80 x 86 microprocessors to encourage programmers to split their applications into logically related entities, such as subroutines or global and local data areas. However, Linux uses segmentation in a very limited way. In fact, segmentation and paging are somewhat redundant, because both can be used to separate the physical address spaces of processes: segmentation can assign a different linear address space to each process, while paging can map the same linear address space into different physical address spaces. Linux prefers paging to segmentation for the following reasons: Memory management is simpler when all processes use the same segment register values that is, when they share the same set of linear addresses. One of the design objectives of Linux is portability to a wide range of architectures; RISC architectures in particular have limited support for segmentation. All Linux processes running in User Mode use the same pair of segments to address instructions and data. These segments are called user code segment and user data segment , respectively. Similarly, all Linux processes running in Kernel Mode use the same pair of segments to address instructions and data: they are called kernel code segment and kernel data segment , respectively. Table 2-3 shows the values of the Segment Descriptor fields for these four crucial segments. I'm unable to understand 1st and last paragraph.

  Read the article

< Previous Page | 119 120 121 122 123 124 125 126 127 128 129 130  | Next Page >