Search Results

Search found 3465 results on 139 pages for 'david powers'.

Page 124/139 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Laptop Acer Travelmate 4050 takes over 10 Mins to POST

  - by Belliez

  Hi, I am a computer tech and have received a laptop for repair. I noticed when I turned it on the laptop would not do anything for a min or two (the fan would run up and stop, power led would shine and some cd rom activity then stop). It would sit there with a black screen. Suddenly after a random number of minutes (between 1-20mins!) the Acer BIOS screen would display and POST would happen before booting into Windows XP. It has frozen in XP at various times and pointed towards a CPU fault and over heating. The fan was on its last legs, sounded like a car engine, so I replaced this. Still same issues. I next replaced the CPU like for like. Same problems. Also applied new thermal paste between the cpu and heatsink, when running the fan kicks in occasionally (not as often as I thought it would) and I left it playing mp3, online radio and updating to service pack 3 and it wouldnt freeze. shutting down ok, cold start, not ok. Waits again before showing the BIOS screen. The hard disk was also making a screaming noise (SMART test and chkdsk passed) but I also replaced this. The laptop powers up with and without the battery so dont think its a battery issue. Running out of ideas and wondered if anyone had any advice. Thanks

  Read the article

• OPN Exchange Keynote On-Demand

  - by kristin.jellison

  We hope everyone has had a chance to refresh and recharge after Oracle OpenWorld 2013. In case you didn’t have the opportunity to catch the full OPN Exchange keynote, we have it on demand for your viewing pleasure. A highlight reel is up on the OPN YouTube channel and on Oracle.com. You can also watch individual keynote segments, from Oracle Executives like Mark Hurd, John Fowler and Andy Bailey, highlighted below. So please, sit back, relax and enjoy the show! You know, in case your football team is on a bye this week. Mark Hurd, President, Oracle Executive Address John Fowler, Executive Vice President, Systems Hardware and Software Engineered to Work Together Joel Borellis, Group Vice President, Partner Enablement Technology, Middleware and Business Intelligence Chris Baker, Senior Vice President, Worldwide ISV,OEM and Java Sales Engineered Systems and Hardware Andy Bailey, Senior Vice President, Strategic Alliances Cloud, Fusion Applications and Customer Experience Thomas LaRocca, Senior Vice President, North America Sales Alliances and Channels Terri Hall, Group Vice President, North America Sales Alliances and Channels Oracle Partner Excellence Awards: North America Hugo Freytes, Senior Vice President, Latin America Alliances and Channels Oracle Partner Excellence Awards: Latin America Mark Lewis, Senior Vice President, APAC Alliances and Channels Hiroshi Watanabe, Senior Vice President, Japan Alliances and Channels Oracle Partner Excellence Awards: APAC and Japan David Callaghan, Senior Vice President, EMEA Alliances and Channels Oracle Partner Excellence Awards: EMEA Cheers! The OPN Communications Team

  Read the article

• Register now for the UK Windows Azure Self-paced Interactive Learning Course starting May 10th

  - by Eric Nelson

  [Suggested twitter tag #selfpacedazure] We (myself and David Gristwood) have been working in the UK to create a fantastic opportunity to get yourself up to speed on the Windows Azure Platform over a 6 week period starting May 10th – without ever needing to leave the comfort of your home/office.  The course is derived from the internal training Microsoft gives on Azure which is both fun and challenging in equal parts – and we felt was just too good to keep to ourselves! We will be releasing more details nearer the date but hopefully the following is enough to convince you to register and … recommend it to a colleague or three :-) What we have produced is the “Microsoft Azure Self-paced Learning Course”. This is a free, interactive, self-paced, technical training course covering the Windows Azure platform – Windows Azure, SQL Azure and the Azure AppFabric. The course takes place over a six week period finishing on June 18th. During the course you will work from your own home or workplace, and get involved via interactive Live Meetings session, watch on-line videos, work through hands-on labs and research and complete weekly coursework assignments. The mentors and other attendees on the course will help you in your research and learning, and there are weekly Live Meetings where you can raise questions and interact with them. This is a technical course, aimed at programmers, system designers, and architects who want a solid understanding of the Microsoft Windows Azure platform, hence a prerequisite for this course is at least six months programming in the .NET framework and Visual Studio. Check out the full details of the event or go straight to registration.   The course outline is: Week 1 - Windows Azure Platform Week 2 - Windows Azure Storage Week 3 - Windows Azure Deep Dive and Codename "Dallas" Week 4 - SQL Azure Week 5 - Windows Azure Platform AppFabric Access Control Week 6 - Windows Azure Platform AppFabric Service Bus If you have any questions about the course and its suitability, please email [email protected].

  Read the article

• Profit at Oracle OpenWorld 2012

  - by user462779

  It's only a week away: Oracle OpenWorld descends on San Francisco from September 30 to October 4. It's always a frantic week for the Profit editorial staff, but here's a few thing we've got going in San Francisco that you'll want to watch out for: Profit on Oracle OpenWorld Live: The Oracle video team will be broadcasting live from the event all week. I have a few interesting on-air interviews booked, including a conversation with business/technology researcher Andrew Mcafee (Monday Oct 1 @ 11:45am), Acorn Paper CEO David Weissberg (Tuesday, Oct 2 @ 12:15pm) and Abhay Parasnis, Oracle Senior Vice President, Oracle Public Cloud (Wednesday, Oct 3, @ 10:45am). Profit in the Oracle Partner Network Lounge: This summer, I worked with the amazing Oracle Partner Network (OPN) team to create the Profit Oracle Specialized Partner Edition 2012. It's a great catalog of Oracle partner success stories and insight into the OPN strategy from its leadership. Look for the special issue of Profit in the Oracle PartnerNetwork Lounge: the place where partners can meet formally or informally with colleagues, customers, prospects, and other industry professionals. Moscone South, Exhibit Hall, Room 100 Oracle Customer Experience Summit @ OpenWorld: There's been a lot of discussion within my editorial team (and content published, as well)about Customer Experience. To keep pace with this evolving subject, I'll be attending this special embedded conference on Wednesday and Thursday (Oct. 3-4). Especially looking forward to Seth Godin's presentation: he was one of the first experts we interviewed forProfit Online five years ago. The Executive Edge @ OpenWorld: Of course, my Oracle OpenWorld is mostly filled with meetings/interviews with Oracle customers about completed Oracle projects and the strategic impact of enterprise IT on business. The ideal place for these conversations is The Executive Edge @ OpenWorld embedded conference. Samovar Tea Lounge at Moscone Center: I spend my down time on the roof of Moscone North, preparing for meetings or having impromptu conversations with attendees at this little oasis overlooking Yerba Buena Gardens. Fee free to drop my for a chat! See you in San Francisco! -Aaron Lazenby

  Read the article

• ArchBeat Link-o-Rama Top 20 for June 17-23, 2012

  - by Bob Rhubart

  The most popular item shared via my social networks for the week of June 17-23, 2012. Simple Made Easy | Rich Hickey InfoQ: Current Trends in Enterprise Mobility Cloud Bursting between AWS and Rackspace | High Scalability A Distributed Access Control Architecture for Cloud Computing Congrats to @MNEMONIC01 on his new book: Oracle WebLogic Server 12c: First Look BI Architecture Master Class for Partners - Oracle Architecture Unplugged Guide to integration architecture | Stephanie Mann Oracle Data Integrator 11g - Faster Files | David Allan Recap: EMEA User Group Leaders Meeting Latvia May 2012 Starting a cluster | Mark Nelson SOA, Cloud & Service Technology Symposium 2012 London - Special Oracle Discount Enterprise 2.0 Conference: Building Social Business | Oracle WebCenter Blog FY13 Oracle PartnerNetworkr Kickoff - Tues June 26, 2012 | @oraclepartners Why should you choose Oracle WebLogic 12c instead of JBoss EAP 6? | Ricardo Ferreira Call for Nominations: Oracle Fusion Middleware Innovation Awards 2012 - Win a free pass to #OOW12 Hibernate4 and Coherence | Rene van Wijk Eclipse and Oracle Fusion Development - Free Virtual Event, July 10th Why building SaaS well means giving up your servers | GigaOM Personas - what, why & how | Mascha van Oosterhout Oracle Public Cloud Architecture | Tyler Jewell Thought for the Day "There is only one thing more painful than learning from experience and that is not learning from experience." — Archibald McLeish (May 7, 1892 – April 20, 1982) Source: SoftwareQuotes.com

  Read the article

• 2D Collision masks for handling slopes

  - by JiminyCricket

  I've been looking at the example at: http://create.msdn.com/en-US/education/catalog/tutorial/collision_2d_perpixel and am trying to figure out how to adjust the sprite once a collision has been detected. As David suggested at XNA 4.0 2D sidescroller variable terrain heightmap for walking/collision, I made a few sensor points (feet, sides, bottom center, etc.) and can easily detect when these points actually collide with non-transparent portions of a second texture (simple slope). I'm having trouble with the algorithm of how I would actually adjust the sprite position based on a collision. Say I detect a collision with the slope at the sprite's right foot. How can I scan the slope texture data to find the Y position to place the sprite's foot so it is no longer inside the slope? The way it is stored as a 1D array in the example is a bit confusing, should I try to store the data as a 2D array instead? For test purposes, I'm thinking of just using the slope texture alpha itself as a primitive and easy collision mask (no grass bits or anything besides a simple non-linear slope). Then, as in the example, I find the coordinates of any collisions between the slope texture and the sprite's sensors and mark these special sensor collisions as having occurred. Finally, in the case of moving up a slope, I would scan for the first transparent pixel above (in the texture's Ys at that X) the right foot collision point and set that as the new height of the sprite. I'm a little unclear also on when I should make these adjustments. Collisions are checked on every game.update() so would I quickly change the position of the sprite before the next update is called? I also noticed several people mention that it's best to separate collision checks horizontally and vertically, why is that exactly? Open to any suggestions if this is an inefficient or inaccurate way of handling this. I wish MSDN had provided an example of something like this, I didn't know it would be so much more complex than NES Mario style pure box platforming!

  Read the article

• Why is Rhythmbox becoming the default (again)?

  - by Christoph

  So, it seems with 12.04, they're switching back to Rhythmbox, after switching from Rhythmbox a year ago. I don't get why. They say that it's because of a blocking bug in GTK3# (if I understand that correctly), but that's just one bug, and in the same breath they say RB is not well maintained. It seems Ubuntu guys were dissatisfied with Banshee in some way, but apparently the Banshee guys were never notified of any problems. Also, it can't be to save disc space by dropping mono, because at the same day it was announced that the install disc will be enlarged by 50MB. Also, isn't it a bit shortsighted to push Banshee for default inclusion, and then drop it again a year later? How is that a sustainable use of dev resources, or consistent? Apparently there was quite some heavy effort by banshee devs - David Nielsen used the term "bending over backwards for Ubuntu" iirc. In summary: Can anyone shed more light on this? Related question: Why is Banshee becoming the default? Sources: http://www.omgubuntu.co.uk/2011/11/banshee-tomboy-and-mono-dropped-from-ubuntu-12-04-cd/ http://www.omgubuntu.co.uk/2011/11/rhythmbox-to-return-as-ubuntu-12-04-default-music-app/ http://www.omgubuntu.co.uk/2011/11/ubuntu-12-04-disc-size-to-be-750mb/ http://summit.ubuntu.com/uds-p/meeting/19442/desktop-p-default-apps/ http://banshee-media-player.2283330.n4.nabble.com/banshee-being-dropped-from-ubuntu-because-of-GTK3-support-td3985298.html

  Read the article

• ArchBeat Link-o-Rama Top 20 for June 3-9, 2012

  - by Bob Rhubart

  The top twenty most popular links as shared via my social networks for the week of June 3-9, 2012. SOA Analysis within the Department of Defense Architecture Framework (DoDAF) 2.0 – Part II | Dawit Lessanu Driving from Business Architecture to Business Process Services | H. V. Ganesarethinam Book Review: Oracle Application Integration Architecture (AIA) Foundation Pack 11gR1: Essentials | Rajesh Raheja Oracle Enterprise Manager Ops Center 12c: Enterprise Controller High Availability (EC HA)| Anand Akela Integrating OBIEE 11g into Weblogic’s SAML SSO | Andre Correa Introducing Decision Tables in the SOA Suite 11g Business Rule component | Lucas Jellema EJB 3.1: Stateless Session Bean Deployed as .war, Dependency Injection, Asynchronous Methods | Frank Munz Educause Top-Ten IT Issues - the most change in a decade or more | Cole Clark Oracle VM RAC template - what it took | Wim Coekaerts WebCenter Content shared folders for clustering | Kyle Hatlestad CRUD Use Case Implementation and ADF Query Search | @AndrejusB Introducing Oracle Cloud | Larry Ellison Exalogic Webcast Series: Rethink Your Business Application Deployment Strategy BI Architecture Master Class for Partners - Oracle Architecture Unplugged Creating an Oracle Endeca Information Discovery 2.3 Application | Mark Rittman Eclipse DemoCamp - June 2012 - Redwood Shores, CA Oracle Cloud offering - What makes it unique? | Tom Laszewski Virtualization at Oracle - Six Part Series The right way to transform your business via the cloud | David Linthicum Protecting a WebCenter app with OAM 11g | Chris Johnson Thought for the Day "Programming without an overall architecture or design in mind is like exploring a cave with only a flashlight: You don't know where you've been, you don't know where you're going, and you don't know quite where you are." — Danny Thorpe Source: softwarequotes.com

  Read the article

• ArchBeat Link-o-Rama for 2012-06-20

  - by Bob Rhubart

  New book: Oracle WebLogic Server 12c: First Look Congratulations to Michel Schildmeijer on the publication of his new book. Call for Nominations: Oracle Fusion Middleware Innovation Awards 2012 - Win a free pass to #OOW12 These awards honor customers for their cutting-edge solutions using Oracle Fusion Middleware. Either a customer, their partner, or an Oracle representative can submit the nomination form on behalf of the customer. Submission deadline: July 17. Winners receive a free pass to Oracle OpenWorld 2012 in San Francisco. ODTUG Kscope12 - June 24-28 - San Antonio, TX San Antonio, TX, June 24-28, 2012 Kscope12, sponsored by ODTUG, is your home for Application Express, BI and Oracle EPM, Database Development, Fusion Middleware, and MySQL training by the best of the best! Eclipse and Oracle Fusion Development - Free Virtual Event, July 10th Get more out of Eclipse with these useful resources. How to Create Multiple Internal Repositories for Oracle Solaris 11 | Albert White Albert White shows you how to create and manage internal repositories for release, development, and support versions of Solaris 11. Social Technology and the Potential for Organic Business Networks | Michael Fauscette "An organic business network driven company is the antithesis of a hierarchical, rigid, reactive, process-constrained, and siloed organization." Cloud Bursting between AWS and Rackspace | High Scalability Nati Shalom explains "cloud bursting," an interesting hybrid cloud model. Born-again cloud advocates finally see the light | David Linthicum "I can't help but wish that we keep an open mind about the next technology evolution when it begins and get religion earlier," says Linthicum. How to know that a method was run, when you didn’t write that method | RedStack Middleware A-Team blogger Mark Nelson shares a useful tip for those working with ADF. Thought for the Day "There does not now, nor will there ever exist, a programming language in which it is the least bit hard to write bad programs." — L. Flon Source: SoftwareQuotes.com

  Read the article

• links for 2011-03-18

  - by Bob Rhubart

  Events Overview (tags: ping.fm entarch) No description available. (tags: ping.fm) Andrejus Baranovskis: SOA & E2.0 Partner Community Forum Slides Oracle ACE Director Andrejus Baranovskis shares slides from his presentation at the SOA & E2.0 Partner Community Forum in Netherlands. (tags: oracle otn oracleace soa enterprise2.0 webcenter) ODTUG Kaleidoscope 2011 - The Premier Conference for Oracle Fusion Middleware AMIS Technology blog Oracle ACE Director Lucas Jellema shares information on what he considers "the best event for anyone doing, dabbling in or considering doing Oracle Fusion Middleware." (tags: oracle otn oracleace odtug fusionmiddleware) Mark Rittman: ODTUG K-Scope 2011 Early Bird Deadline is Closing "The deadline for Early Bird registrations for Kscope is fast approaching [March 25]. If you want to attend at the discounted rate, sign up soon." - Oracle ACE Director Mark Rittman (tags: oracle otn oracleace odtug) Master Data Management and Cloud Computing (Oracle Master Data Management) "Cloud Computing has the potential to significantly degrade data quality across the enterprise over time. Deploying a Master Data Management solution prior to or in conjunction with a move to the Cloud can insure that the data flowing into the enterprise from the Cloud is clean and governed." - David Butler (tags: oracle otn mdm cloud)

  Read the article

• JOIN THE ORACLE Fusion Middleware Summer Camps

  - by mseika

  JOIN THE ORACLE Fusion Middleware Summer Camps For Specialized partners who are working on following projects & opportunities, we offer these advanced summer camps: - BPM Suite 11 - ADF 11g - WebCenter Portal - WebLogic 12c - SOA Suite 11g - ADF for BPM Suite 11 - WebCenter Sites 11g All training sessions will be from HQ product management and our PTS team. The sessions will take place in July in Lisbon Portugal and Munich Germany. . Participation is limited to two people per company and bootcamp. Registration is handled by first come first serve, please pay attention to the skill requirements, the pre-requisitions and the follow up! We will not accept people onto the training who do not match the criteria! Lisbon: Monday, July 9th 11:00AM - Friday July 13th 16:00 PM (Lisbon time) - ADF 11g advanced training by Grant Ronald and Frank Nimphius - WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata - WebLogic 12c training by Cosmin Tudor Munich: Monday, July 16th 11:00 AM - Wednesday July 18th 16:00 PM (CET) - ADF for BPM Suite 11g advanced training by David Read - WebCenter Sites 11g advanced training by Product Management & PTS Cost: Free of charge, cancelation or no-show fee 2.000€ Bootcamps are limited to 20 persons first come first serve For details and registration please visit Lisbon registration page: & Munich registration page Quotes summer camps 2011 “From zero to hero with this BPM workshop” Steven Boon, Ordina Linkedin “This is the training that prepares for real projects and POCs” Jon Petter Hjulstad, eVita – blog & twitter SOA & BPM Partner Community registration Please first login at http://partner.oracle.com and then visit: http://www.oracle.com/goto/emea/soa. If you have any questions please contact the Oracle Partner Business Center. If you have questions please feel free to contact us any time! Best regards Jürgen KressOracle EMEA SOA & BPM Partner Adoption EMEATel. +49 89 1430 1479E-Mail: [email protected]

  Read the article

• Computer turns itself on after any off mode

  - by Patrick

  Whenever I shut down my computer, or put it in sleep/hybernate, it turns on after two seconds. It doesn't post, it just powers on and then idles. To actually turn it off, I switch off the psu. The problem is now, whenever I switch the psu on and try to boot, it doesn't always turn on. It takes a good amount of flicking the psu switch on and off before the motherboard lights up. So far I've determined the things its not: its not caused by the mouse or network waking up the computer. I've been able to go into hybernate for the past year. And all "wake on X" settings in the bios are diabled. its not a scheduled task waking up the computer at a given hour, it occurs every single time its not due to an upgrade or new installation, since I haven't done either in a very long time I'm sure its a hardware issue. So I'd like to know, is my psu dead, or the motherboard? The psu is an Antec Earthwatts 600w, the motherboard is an Asus P5Q-E, both one year old.

  Read the article

• IDC's Sally Hudson on Securing Mobile Access

  - by Naresh Persaud

  After the launch of Identity Management 11g R2, Oracle Magazine writer David Baum sat down with Sally Hudson, research director of security products at International Data Corporation (IDC) to get her perspective on securing mobile access.  Below is an excerpt from the interview. The complete article can be found here. "We’re seeing a much more diverse landscape of devices, computing habits, and access methods from outside of the corporate network. This trend necessitates a total security picture with different layers and end-point controls. It used to be just about keeping people out. Now, you have to let people in. Most organizations are looking toward multifaceted authentication—beyond the password—by using biometrics, soft tokens, and so forth to do this securely. Corporate IT strategies have evolved beyond just identity and access management to encompass a layered security approach that extends from the end point to the data center. It involves multiple technologies and touch points and coordination, with different layers of security from the internals of the database to the edge of the network." ( Sally Hudson, Oracle Mag Sept/Oct 2012) As the landscape changes you can find out how to adapt by reading Oracle's strategy paper on providing identity services at Internet scale. 

  Read the article

• How Do Top Performing High Tech Companies Measure Online Marketing Success?

  - by Charles Knapp

  You might expect a focus on Net Promoter scores, open rates, and click metrics. The real answers from top performers may surprise you. I've been working for a few months with Aberdeen Group and colleagues from IBM and Oracle to survey high technology firms worldwide on best practices in marketing and channel sales effectiveness.  Now, we will share the results of our original customer research in a new white paper and webcast. Register today to learn how leading High Tech companies are increasing their Return on Marketing Investment (ROMI) and growing channel sales revenue. Discover how top performing high tech companies manage and use customer data, measure marketing spend effectiveness, and support internal and channel sales. Learn how best in class high tech companies use enterprise data throughout their customer lifecycle -- messaging to leads, selling to prospects, and serving customers. Our speakers will be: Peter Ostrow, Research Director - Sales Effectiveness, Aberdeen Group David Lasher, Global Business Services Partner, IBM Jonathan Oomrigar, Vice President, Global High Technology Business Unit, Oracle Reserve your place now! This global webinar is on Tuesday, November 15, 10-11 am PST / 1-2 pm EST / 6-7 GMT / 7-8 CET

  Read the article

• Spring to Java EE, Part Three - new tech article on otn/java

  - by Janice J. Heiss

  In a new article up on otn/java, Java EE expert David Heffelfinger continues his series exploring the relative strengths and weaknesses of Java EE and Spring. Here, he demonstrates how easy it is to develop the data layer of an application using Java EE, JPA, and the NetBeans IDE instead of the Spring Framework.In the first two parts of the series, he generated a complete Java EE application by using JavaServer Faces (JSF) 2.0, Enterprise JavaBeans (EJB) 3.1, and Java Persistence API (JPA) 2.0 from Spring’s Pet Clinic MySQL schema, thus showing how easy it is to develop an application whose functionality equaled that of the Spring sample application.In his new article, Heffelfinger tweaks the application to make it more user friendly.From the article:“The generated application displays primary keys on some of the pages, and these keys are surrogate primary keys—meaning that they have no business value and are used strictly as a unique identifier—so there is no reason why they should be visible to the user. In addition, we will modify some of the generated labels to make them more user-friendly.”He concludes the article with a summary:“The Java EE version of the application is not a straight port of the Spring version. For example, the Java EE version enables us to create, update, and delete veterinarians as well as veterinary specialties, whereas the Spring version of the application enables us only to view veterinarians and specialties. Additionally, the Spring version has a single page for managing/viewing owners, pets, and visits, whereas the Java EE version of the application has separate pages for each of these entities.The other thing we should keep in mind is that we didn’t actually write a lot of the code and markup for the Java EE version of the application, because the bulk of it was generated by the NetBeans wizard.” Have a look at the complete article here.

  Read the article

• ArchBeat Link-o-Rama Top 10 for November 2, 2012

  - by Bob Rhubart

  ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI, " reports Oracle ACE Director Andrejus Baranovskis. Big Data: Running out of Metric System | Andrew McAfee Do very large numbers make your brain hurt? Better stock up on aspirin. According to Andrew McAfee: "It seems safe to say that before the current decade is out we’ll need to convene a 20th conference to come up with some more prefixes for extraordinarily large quantities not to describe intergalactic distances or the amount of energy released by nuclear reactions, but to capture the amount of digital data in the world." Cloud computing will save us from the zombie apocalypse | Cloud Computing - InfoWorld "It's just a matter of time before we migrate our existing IT assets to public cloud systems," says InfoWorld cloud blogger David Linthicum. "Additionally, it's a short window until the dead rise from the grave and attempt to eat our brains." Is is Halloween or something? Thought for the Day "A computer lets you make more mistakes faster than any invention in human history—with the possible exceptions of hand guns and tequila." — Mitch Ratcliffe

  Read the article

• Should I use the cool, new and awesome stuff [closed]

  - by Ieyasu Sawada

  I'm in the field of Web Development. I follow a lot of awesome people on Twitter(Paul Irish, Alex Sexton, David Walsh, Rebecca Murphey, etc.) By following these people I'm constantly updated of the new and cool stuff in web development(backbone.js, angular.js, require.js, ember.js, jasmine, etc.) Now I'm creating a web application for a client and because of the different tools, libraries, plugins that I'm aware of I don't even know anymore when do I need to use those or do I even need those, or how do I even implement it in a sane way where I won't have to repeat myself(DRY). What's your advice on what I really need to do in order to become better. Do I really need to use these cool new tools or should I just stick with what I know for now and try to make my code better. Should I unfollow these people in order to not pollute my mind with stuff that I can't really use now because I don't have the necessary experience in order to use it. What sort of things should I really be focusing on for someone like me who has only about 2 years of experience in the field of web development.

  Read the article

• append $myorigin to localpart of 'from', append different domain to localpart of incomplete recipient address

  - by PJ P

  We have been having some trouble getting Postfix to behave in a very specific fashion in which sender and recipient addresses with only a localpart (i.e. no @domain) are handled differently. We have a number of applications that use mailx to send messages. We would like to know the username and hostname of the sending party. For example, if root sends an email from db001.company.local, we would like the email to be addressed from [email protected]. This is accomplished by ensuring $myorigin is set to $myhostname. We also want unqualified recipients to have a different domain appended. For example, if a message is sent to 'dbadmin' it should qualify to '[email protected]'. However, by the nature of Postfix and $myorigin, an unqualified recipient would instead qualify to [email protected]. We do not want to adjust the aliases on all servers to forward appropriately. (in fact, every possible recipient doesn't have an entry in /etc/passwd) All company employees have mailboxes on Exchange, which Postfix eventually routes to, and no local Linux/Unix mailboxes are used or access. We would love to tell our application owners to ensure they use a fully qualified email address for all recipients, but the powers that be dictate that any negligence must be accommodated. If we were to keep $myorigin equal to $myhostname, we could resolve this issue by having an entry such as the following in 'recipient_canonical_maps': @$myorigin @company.com However, unfortunately, we cannot use variables in these map files. We also want to avoid having to manually enter and maintain the actual hostname in 'recipient_canonical_maps' for each server. Perhaps once our servers are 'puppetized' we can dynamically adjust this file, but we're not there yet. After an afternoon of fiddling I've decided to reach out. Any thoughts? Thanks in advance.

  Read the article

• @CodeStock 2012 Review: Leon Gersing ( @Rubybuddha ) - "You"

  "YOU"Speaker: Leon GersingTwitter: @Rubybuddha Site: http://about.me/leongersing I honestly had no idea what I was getting in to when I sat down in to this session. I basically saw the picture of the speaker and knew that it would be a good session. I was completely wrong; it was the BEST SESSION of CodeStock 2012.  In fact it was so good, I texted another coworker attending the conference to get over and listen to Leon. Leon took on the concept of growth in the software development community. He specifically referred David Hansson in his ability to stick to his beliefs when the development community thought that he was crazy for creating Ruby on Rails. If you do not know this story Ruby on Rails is one of the fastest growing web languages today. In addition, he also touched on the flip side of this argument in that we must be open to others ideas and not discard them so quickly because we all come from differing perspectives and can add value to a project/team/community. This session left me with two very profound concepts/quotes: “In order to learn you must do it badly in front of a crowed and fail.” - @Rubybuddha I can look back on my career so far and say that he is correct; I think I have learned the most after failing, especially when I achieved this failure in front of other. “Experts must be able to fail.” - @Rubybuddha I think we can all learn from our own mistakes but we can also learn from others. When respected experts fail it is a great learning opportunity for the entire team as well as the person who failed. When expert admit mistakes and how they worked through them can be great learning tools for other developers so that they know how to avoid specific scenarios and if they do become stuck in the same issue they will know how to properly work their way out of them.

  Read the article

• Light mask map and camera for static lights in XNA Platformer

  - by JiminyCricket

  Using the example for some basic light maps found here : http://blog.josack.com/2011/07/xna-2d-dynamic-lighting.html, I've managed to create a lightmap texture using individual lightmaps and display it over a 2D tiled world as in the Platformer example. I'm using the very basic 2D camera example as found here : http://www.david-amador.com/2009/10/xna-camera-2d-with-zoom-and-rotation/, and the problem is that the lightmap texture scrolls with the player sprite. This looks pretty good and would be excellent for lighting the player sprite as it moves. But, I also want to be able to place static lights (or some initial position for the lights) that do not move with the player or camera. When I turn off the camera or give it a static position, it works as a series of static lights so I believe it's probably caused by the camera transformation matrix following the player around. I'm using RenderTarget2Ds, one for the main game screen after all the backgrounds and tiles are rendered, and one for the "lightmap" which consists of a black background and a bunch of lighting textures which are merged with it using additive blending. For now, I'm doing all of this in PlatformerGame.cs where the camera transformation and position is set and the level.Draw() call is made. I can't figure out how to separate the drawing of the lightmap and the camera following the player. I was thinking it would be better to render the shadows and lighting directly in the drawing of the level itself, but I'm not sure how to do that either because this technique requires RenderTarget2Ds and calling SpriteBatch.Begin()/End().

  Read the article

• Strange battery behavior on laptop

  - by EpsilonVector

  My laptop is behaving rather strangely lately, and I was hoping to get some idea as to what may be causing such symptoms. The problem: When charging, very minute or so it loses connectivity with the AC adapter for a split second, and regains it back immediately. When this happens the little light that indicates the computer is plugged in does flicker off and back on, but I checked the adapter by replacing the battery on my laptop, and this indeed solves the problem, so it is probably the battery which is at fault, not the adapter (I also tried to move the adapter's wire around just to make sure it had nothing to do with torn wires). I suppose that the obvious solution is to get a new battery, but as far as battery defects go- this is a rather strange one; it loses connection with the adapter, but still powers the computer, and changing the power setting to a balanced plan (was maximum performance) seem to have solved the problem too. Is there a chance this is not simply the battery, but some kind of other electronic defect? And if not, what can cause it to behave so strangely? PS I tried to recalibrate it- didn't help.

  Read the article

• Using position function for accessing particular node when using While Activity in SOA 11.1.1.5

  - by AJ

  Hi If you are using while activity in SOA Suite 11.1.1.5 and within loop you have a requirement to access repeating node of XML. You might need to use below XPATH expression for accessing the node. Here is the XML that I am using for this example <?xml version='1.0' encoding='UTF-8'?> David DemoJob 1 2012-04-15 40000 0 10 Steve TestJob 1 2012-04-15 40000 0 10 Here you can notice that Emp node is repeating i.e. EmpCollection node will contain multiple employees. Now in loop one of assign activity you need to access a particular node for e.g. For first time loop runs you want to access first node and second time second node and so on. You need to make use of postion() function like bpws:getVariableData('Receive1_Read_InputVariable','body','/ns4:EmpCollection/ns4:Emp[position()=$loopCounter]/ns4:job') Please Note: Here loopCounter is a variable that we have created of type xsd:int and prior to loop we have initialized a value of 1. Loop will run depending on the number of Emp nodes present at runtime. For that in while Activity you can use below XPATH expression ora:countNodes('Receive1_Read_InputVariable','body','/ns4:EmpCollection/ns4:Emp')=bpws:getVariableData('loopCounter') Do let me know in case of any issues or concern. Cheers AJ

  Read the article

• Today's Links (6/24/2011)

  - by Bob Rhubart

  Fusion Applications - How we look at the near future | Domien Bolmers Bolmers recaps a Logica pow-wow around Fusion Applications. Who invented e-mail? | Nicholas Carr IT apparently does matter to Nicholas Carr as he shares links to Errol Morris's 5-part NYT series about the origins of email. David Sprott's Blog: Service Oriented Cloud (SOC) "Whilst all the really good Cloud environments are Service Oriented," says Sprott, "it’s very much the minority of consumer SaaS that is today." Fast, Faster, JRockit | René van Wijk Oracle ACE René van Wijk tells you "everything you ever wanted to know about the JRockit JVM, well quite a lot anyway." Creating an XML document based on my POJO domain model – how will JAXB help me? | Lucas Jellema "I thought that adding a few JAXB annotations to my existing POJO model would do the trick," says Jellema, "but no such luck." Announcing Oracle Environmental Accounting and Reporting | Theresa Hickman Oracle Environmental Accounting and Reporting is designed to help companies track and report greenhouse emissions. Yoga framework for REST-like partial resource access | William Vambenepe Vambenepe says: "A tweet by Stefan Tilkov brought Yoga to my attention, 'a framework for supporting REST-like URI requests with field selectors.'" InfoQ: Pragmatic Software Architecture and the Role of the Architect "Joe Wirtley introduces software architecture and the role of the architect in software development along with techniques, tips and resources to help one get started thinking as an architect."

  Read the article

• What's needed in a complete ASP.NET environment?

  - by Christian W

  We have a ASP3.0 application with a few ASP.NET (2.0) dittys mixed in. (Our longtime goal is to migrate everything to ASP.NET but that's not important for this issue) Our current test/deploy workflow is like this: 1 Use notepad++ or VS2008 to fix a bug/feature (depending on what I have open) 2 Open my virtual test-server 3 Copy the fixed file over, either with explorer, or if I can be bothered to open it, WinMerge 4 Test that the fix works 5 Close the virtual test-server 6 Connect to our host with VPN 7 Use WinMerge to update the files necessary 8 Pray to higher powers that the production environment is not so different that something bombs. To make things worse, only I have access to my "test-server". So I'm the only one testing it. I really want to make this a bit more robust, I even have a subversion setup running. But I always forget to commit changes... And I don't even work in my checked out folder, but a copy of what is currently in production... Can someone recommend some good reading on deploying, testing, staging and stuff like that. I currently use VS2008 and want to use subversion or GIT (or any other free VCS). Since I'm the only developer, teamsystem is not really an option (cost-related). I have found myself developing an "improved" feature, only to find a bug in the same feature in the production system. And since my "improved" feature incorporated deleting some old functionality, I have to fix bugs directly in production... That's not a fun feeling... (I have inherited this system recently... So it's not directly my fault that it is like this ;) )

  Read the article

• Java EE @ Devoxx UK

  - by delabassee

  Devoxx UK is taking place next week (12th and 13th June) in London. As with any Devoxx conference, this UK edition will have a nice mix of content, an impressive list of speakers and obviously Java EE will be well will covered too:  Apache TomEE, Java EE Web Profile and more on Tomcat (David Blevins) Myths, Tales and Voodoo - About Java EE and Testing (Adam Bien) 50 new features of Java EE 7 (Antonio Goncalves & Arun Gupta) Java EE 7 Hands-on Lab (Arun Gupta) In addition, there will be 2 BoF related to Java EE on Thursday evening, the first BoF will be about the Java EE platform and the second one will be about the Java EE Reference Implementation, i.e. GlassFish. I will participate in the Java EE Community BoF where will discuss Java EE general but with all recent activities, I suspect that a large portion of the BoF will spent on discussing the current plans for Java EE 8.  Right after and in the same room, I will join Steve Millidge of C2B2 for the GlassFish is here to stay! BoF. The goal is to discuss on GlassFish, the current status, the plans for the next release, how the community can contributes, etc. It should be mentioned that attending those BoFs is completely free, just make sure to register here.  So if you are in London next week, mind the Geek and see you at Devoxx UK!

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >