Search Results

Search found 17063 results on 683 pages for 'frank computer'.

Page 124/683 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • Windows 8.1 Update 1 Disk Usage 100%

    - by Gookjin Jeong
    Background Information / Computer Specs I have a 14-inch Samsung Series 5 Ultra. Core i5 CPU, 750GB HDD, 8GB RAM, Intel HD Graphics 4000. I've had the computer for about 1.5 years with no major problems. Problem The issue appeared at the beginning of April this year, when I updated the OS to Windows 8.1 Update 1 (not from 8 to 8.1). After being on continually (except for at night, when I put it on sleep mode) for about 48 hours, the disk usage as seen by Task Manager hits 100%. When this happens, everything from opening/closing applications to typing and even bringing up the start screen by pressing the Windows key becomes extremely slow. The only way to make the disk usage decrease is to restart the computer. Then the problem repeats. I've used my current laptop (as well as my previous laptops) this way -- putting it on sleep mode at night and restarting it only when Windows needs to install updates -- for a long time. So I know the 100% disk usage is not due to the way I use the computer. The thing that causes the spike varies. Sometimes it's System, sometimes it's one of the various applications I installed (e.g. Chrome, Evernote, Spotify, Wunderlist, iTunes, etc.), and sometimes it's Antimalware Service Executable, etc. Tried Solutions I think I tried almost every solution out there for this problem: Running the check disk command (chkdsk /b /f /v /scan c:) from Admin Command Prompt Running Windows Memory Diagnostic Disabling Superfetch and Windows Search from services.msc Running "Fix problems with Windows Update" from Control Panel -- Troubleshooting Updating and rolling back the graphics driver (Intel HD 4000) Disabling "Use hardware acceleration when available" from Chrome settings Disabling Intel Rapid Storage Technology Running the SFC /SCANNOW command as recommended here Running a quick scan & a full scan from Windows Defender (no threats found) Taking the hard drive out and putting it back Refreshing the computer, from the Update and recovery -- Recovery option in Windows settings NONE of the above worked for me. I was about to give up but then noticed that one of the main culprits of the disk usage spike, as shown in the "Disk Activity" section of the Resource Monitor, was C:\System (pagefile.sys). I googled around and found that one of the recommended solutions was to disable pagefile. I then went to **Control Panel -- System and Security -- System -- Advanced system settings -- Advanced tab -- Performance settings -- Advanced tab -- "Change" under Virtual memory and discovered that the number for "Currently allocated" at the bottom was 1280MB, although the number for "Recommended" was 4533MB. I immediately changed it to 4533MB and checked my family members' computers to see what the numbers were like. All of theirs had a currently allocated space that was only slightly smaller than the recommended space. See screenshot below: This might fix the problem. I'll have to wait a couple more days.But if it doesn't, what in the world should I do next? I'm guessing the hard drive isn't failing because This computer is less than 2 years old; and Speccy says that the status of the HDD is good. Update 5/27/2014 The "4533MB" solution did not work. I had to reboot the computer about 30 minutes ago because the disk usage again hit 100%. When I opened Resource Monitor the C:\System (pagefile.sys) again was shown to be the culprit. I have now disabled pagefile entirely via the same window shown above in the screenshot. The number for "currently allocated" is now 0MB. Will update again in a couple days, or if the problem occurs again, whichever comes sooner.

    Read the article

  • what type of laptop do I need to run a amd64 or i386 VM?

    - by Frank Schwieterman
    I was running an amd64 build of Ubuntu on a VM on a Windows host which was also amd64. Later I found I could not run the same amd64 iso on my laptop, which is intel without hyper-V. I was confused I thought chipset mattered, but maybe it does not. When buying a PC or Apple, is there anything to check about the chipset to make sure it can run different types of VMs? In my case, I was trying to run ubuntu on a Thinkpad T520. Per answer below, I did need to enable some bios settings. I'm still having some issues. Running ubuntu on virtual box, when I try to use ubuntu-12.10-server-amd64.iso for the CD/DVD device to start a new VM, virtualbox complains "Failed to open the CD/DVD image . Could not get the storage format of the medium (VERR_NOT_SUPPORTED). When I try to use ubuntu-12.10-server-i386.iso the ISO is accepted, but then the VM complains "FATAL: No bootable medium found! System halted." I had been using an amd64 iso on my home PC which is amd64 and it works fine, which is why I suspected CPU mismatch was the problem at first. But it seems like I'm having issues, and maybe this superuser thread can be used to verify the cpu is irrelevant in this case.

    Read the article

  • Cannot add Windows 7 client to SBS 2008

    - by Sandokan
    I have just installed SBS 2008 R2 Standard on VMware Workstation 9 along with Windows 7 Pro N. Both are activated and running fine. I have followed the steps to configure SBS 2008 and am now at the point where I'm to add a computer to the domain. Here is where the problem begins. I have gone through the steps of using the webinterface. On the client I downloaded Launcher.exe. I then run it and get the error "Check computer requirements - Failed" (translated from swedish): "This computer doesn't reach the requirements for connecting to the network." "The computer doesn't reach the maximum requirements for the operating system with regards to connect to the network" The provided link for More information only leads to a general supportpage and doesn't handle this specific error. I have also checked the time settings and they are correct. Any clue as to what this problem could be?

    Read the article

  • clipboard addon to remove text formatting

    - by Frank Schwieterman
    I was just wondering if anyone know of a Windows application that will remove formatting from any text in the clipboard? So if I copy something from word into another document, the content is pasted as the original text without formatting. I want this to work no matter what application I paste into.

    Read the article

  • Screen randomly goes blue/black/white

    - by FubsyGamer
    Problem Randomly, while using my computer, the monitor goes dark grey/almost black, or it goes white with faint grey vertical lines, or it goes blue with black vertical lines. It's as if the computer powers off. People tell me I sign out of Skype, Spotify stops playing when it happens, etc. When I look at the tower, it doesn't seem like it's off at all. Nothing changes, fans are spinning, lights are on, etc. If you were only looking at the tower, you'd never know there was a problem The only way I can get it to come back up is to push and hold the power button and turn it off, then back on This never happens while I'm playing video games. I've done 5-6 hour sessions of League of Legends, and it doesn't do anything When I'm just browsing the web, reading email, checking Reddit, etc, it happens all the time. It can happen multiple times in a session, it usually takes only about 5 minutes from the time I start browsing to when the computer crashes This started happening after I moved to a new apartment (this has to be relevant somehow, it was not happening where I lived before) There is nothing in the crash logs or event logs System Specs i5 2500k CPU AMD Radeon 6800 GPU Gigabyte z68a-d3h-b3 motherboard WD VelociRaptor 1 TB HDD Screenshots Device manager About screen Things I have tried I was getting a WMI Error in my event logs, but I fixed it using Microsoft's fix, KB 2545227 I was using Windows 8. I wiped the HDD and downgraded to Windows 7 64 bit I took out the video card and used a can of air to totally clean out the video card, all fans, and the inside of the computer in general. I made sure all of the video card pins were fine, then reconnected it I tried to update my motherboard BIOS, but anything I downloaded from Gigabyte was only for 32 bit machines, not 64. I don't even know how to tell what my motherboard BIOS is at right now I am using a power strip, and anything else connected to it works just fine If I re-seat the monitor cable while this is happening, nothing changes Please, help me. I've been battling this for several weeks now, and it's so frustrating it makes me not even want to use the computer.

    Read the article

  • How to charge an iPhone on a Windows PC without Installing iTunes

    - by Martin Hollingsworth
    I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

    Read the article

  • Impossible do find motherboard drivers to Dell Dimension 3000

    - by Masziej
    Hello, I recently formatet and reinstalled XP on my girlfriends computer. Ive had this computer since 2001, never formatet it, until now =) Anyway the problem is that i cant find any drivers for the motherboard (integrated audio, video and ethernet). as i said its an old ass Dell. Cant remember if I got any cds along with it. Even if i did theyre gone a long time ago. So, I ran CPUZ and got this: --Motherboard-- Dell Computer Corp. Model 0K8980 And started googling. But didnt find any drivers. Still cant So im asking for a little help here. I really need to get the computer going before she wants a new one :D And yes i have looked on dells homesite, but they dont seem to wanna host drivers for their old stuff

    Read the article

  • ql-server-2008 client Access license

    - by thushya
    Hi, case 1 : i have one user makes 10 connection from single computer, maximum number of connection at a given time = 10, what is the number CAL i need here ? case 2 : i have 10 users have access to only 1 computer, 10 user connect from single computer - maximum connection at any given time = 1, what is the number CAL i need here ? case 3 : i have 10 users using 10 computers, all 10 are making total of 5 connection maximum in any given time, what is the number of CAL i need here ? Thanks.

    Read the article

  • Setting up a linux switch

    - by Shahmir Javaid
    I have a C++ Program to sniff each and every packet that crosses my linux box. However i need to now get my linux box to listen to every traffic in my network. I could buy a managed switch and set up port spanning, but i aint paying 200+ £'s for a switch and plus gives me a chance to learn. My Network +---------Computer A | Internet-----Router------Switch-------------+---------Linux Box | +---------Computer B Proposed Network +---------Computer A | Internet-----Router------Linux Box--------Switch eth0^ ^eth1 | +---------Computer B How would i setup this in linux. Do i just configure both the ethernet on different IP Address on the same network. Or am i completelly on the wrong track My System Fedora 13. Thanks

    Read the article

  • Windows 7 random black screen when idle

    - by Omar
    Occasionally, when I'm away from my computer for about 5 minutes, the computer screen will go black and all USB devices (keyboard/mouse) will lose power. Attempting to move the mouse or pressing keys does not 'wake up' the computer. This only started happening a few days ago but I'm not sure what changes I did could have caused this and I uninstalled programs (one by one) I installed before it started happening, but still having the same issue. The one thing I noticed different about my computer since it started happening is i've been getting random survey popups from www.insightexpress.com. I ran Microsoft Security Essentials scan, it picked up some Java related malware, I removed it but still the same issue. I'm running MBAM right now and will run SAS after. Edit: I just updated drivers for motherboard and video card and ran virus scans, still having the same issue.

    Read the article

  • Windows Server 2008 and port 80

    - by Frank
    Hi experts, I'm having an issue with my Windows Server 2008. I can successfuly connect to it with FTP(port 21), remote desktop(whatever the port number is), https but not with simple http or port 80, from the outside of my LAN. Is there some settings I don't know about regarding this special port on the firewall or on IIS7? For your information, I can connect to port 80 as long as I'm on the same LAN, but as soon as the request come from the outside, I get nothing... Please help Thank you

    Read the article

  • DPM - Monitoring is green, Protection has error and Latest rec point is old. How do I interpret that?

    - by LosManos
    How do I read the DPM info in this case? Monitoring says Failed but Protection shows Ok while having a Latest recovery point from last year. Under Monitoring tab I have Failed for Source | Computer | Protection group | Start time Computer\System Protection | MyServerName | Recovery point | 2014-06-09 19:00:00 which shows me that something happened last night. But under Protection tab everything is green. Here I have Protection group member | | Protection status Protection group ..name.. Computer: MyServerName Computer\System protection Bare metal recovery OK ... Latest recovery point: 2013-12-12 06:32:54 My guess is that backup failed last night once, but succeeded later. It then found out that there hasn't been any change since sometime last year and leave it be and flags Ok.

    Read the article

  • Trick XP into having more RAM?

    - by Industrial
    Hi everyone, Are there any way known to trick an computer with XP to appear to have more RAM? I need to install a specific program (which fits in my system requirements), which is bundled with a number of other programs on an DVD. Unfortunately, the other programs besides the one that I need demand twice the amount of RAM that's available on my computer and the installation is closed due to this. Can I trick my XP computer into have more RAM temporarily to bypass the block in the install executable? Thanks

    Read the article

  • Where on my C:/ or D:/ drive is the Windows startup directory ?

    - by Frank
    I am developing a Java program that needs to run when user turns on his PC, I was suggested to : create a .bat file @javaw -jar path/to/jar/Name.jar arguments drop this in the Windows startup directory My question is : Can my Java program save the above file into the Windows startup directory ? Where is this Windows startup directory on the C: or D: drive ? How can my Java app find out the location ? Is it the same on all versions of Windows ?

    Read the article

  • Strange RDP / Remote Desktop problem

    - by John Landheer
    I'll try to be as specific as I can be: Server is running SBS 2008 R2 (with all updates) Server is connected to the internet Server has 2 NIC's, one is disabled Server is running RDP Service (accessible directly from the internet, I know, not as secure as it should be) Computers A and B are on the same local net. Computers A and B are both Windows 7. Users X and Y are both admins on the server Computer A can connect as user X to the server with mstsc Computer A can connect as user Y to the server with mstsc Computer B can connect as user X to the server with mstsc computer B CANNOT connect as user Y to the server with mstsc! The last point is the problem, I get an authentication error. This used to work flawlessly for the last year. The server and desktops have been rebooted. I find it very strange....

    Read the article

  • Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

    - by Synetech
    I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

    Read the article

  • Problems after installing a plethora of updates

    - by box
    yesterday I decided to install 32-bit Ubuntu on my 64-bit desktop, first of all, is that a problem? After installing, i had around 270 updates to install, according to the update manager. I was having trouble launching a game with WINE, so I thought updating might help. After updating, I restarted my computer, and after a long while it showed me my desktop and the icon's on it, but I didn't get anything else. I didn't have the "taskbar" (not sure what it's called, sue me) on the left side, nor the bar at the top. I also received an error message saying some program had stopped working. I decided to restart my computer again, and that was when it told me that i have to re-configure my drivers, or run in "Low Graphics" mode for one session, amongst other options. Well, I decided to try to revert to the "basic video drivers", which was an option it gave. Restarting the computer gave me the same problem as in the second paragraph. After a few more restarts and a night of restless sleep, here I am trying to start my computer again, only to receive a black screen, and my monitor "going to sleep". I'm sort of stumped here, being new to Ubuntu (desktop, at least) and I really hope this gets fixed without me having to install Ubuntu on yet another partition (I have three other partitions for various things already) tl;dr: Black screen on boot after installing updates.

    Read the article

  • No keyboard after suspend, even after hard reset

    - by subatomics
    all. While I was using a Ubuntu 9.1 live CD, I put the computer (Toshiba Satellite C655) into standby. After I resumed, the keyboard stopped functioning, though the mouse (USB) still worked. I decided to turn off the computer, but after Ubuntu shuts down, it asks you to press "enter" to actually turn the machine off. The keyboard was still dead, so I all I could do was use the on/off switch to power down the computer. Now, when I try to boot the computer, nothing happens. Before this problem, I would see a menu asking me to select an OS (I had Windows 7 and Windows XP installed). I cannot use any emergency measures because I need to press F12 to boot from a CD, and the keyboard is still not working. I tried removing the HD to force a boot from the CD, but it didn't work. I also tried to plug in a USB keyboard, which failed as well. Right now, I have no idea how to fix this. Any ideas? Thanks.

    Read the article

  • solving network connection problem on xp

    - by doug
    Hi there I feel so stupid, because I have to fix my dad computer(which was mine years ago). So it is an old computer on which I have installed windows xp and the drivers for main-board. The device manager says that I have no more problems with the hardware. That computer has to connect to a router from my room but it doesn't. On ping 192.168.2.1 I get "Request time out"., The other computers are connecting to that router. Only the old computer doesn't connect to the LAN and later to the internet. Also it doesn't get a good IP(from the same class). After running ipconfig command I know that i have an IP with 169.... What can I do? Do you have any tips for me?

    Read the article

  • My new SSD is causing issues. How can I solve them?

    - by Allan
    Computer specs 1 TB harddisc 120 GB 520intel SSD 8 GB DDR3 RAM Athlon Phenom II x64 955 3. 2ghz DK DFI Lanparty FX7900 M3H3 motherboard ASUS ATI RADEON HD6970 2 GB I have bought a new SSD (Intel 520, 120 GB), and wanted to use this as my system disc. I removed the other harddisc, and installed the SSD with the newest firmware. And then Windows 7 I updated Windows 7 with no problems and then put back my old harddrive. I formatted that old harddrive just to clean up at the same time... So at this stage everything was perfect. My new SSD was set as Master 0 Primary it boots on it and I have 1 TB emptyu harddrive I can use for whatever I want. So far no errors at all Now here is the problem, I installed a few games and everytime I tried to play the computer would say Windows must restart because DCOM server process launcher service terminated, or it says Windows must now restart because the Plug and Play service terminated unexpectedly Most commonly this error is caused by a rootkit virus, well I have tried formatting my entire computer, and running every antivirus I could find, so that shouldn't be it. I've also read somewhere it might happen when there are hardware issues. That on the otherhand would make sense, as I just put in a new SSD. I don't expect you to know this error. I haven't found anyone who knew it yet. maybe you can me guide through what might have gone wrong when I placed in the SSD? What have I checked regarding the SSD? It displays the right name when the computer starts up It has the newest firmware Did a 'sfc /scannow' which told me everything was fine I don't know what to do from here. Everything seems to work great with the drive. when I start playing games my computer crashes.

    Read the article

  • Maintaining a set of (virtual) windows XP machines

    - by Frank Meulenaar
    I have a small set (currently 3, going to 6, not going to be more than 10) of (virtual, vmware workstation) windows XP machine's. They are similar but not exactly the same. I'm currently rolling out windows updates etc by hand: start machine 1, update, close, etc; I'd like to review the updates first before the clients can install them. Incidentally there are also other updates to be performed: changes some files on all machines, install new Java versions, etc. What's a good way of doing this automatic? I tried to search for this but things like Active Directory seem overkill to me.

    Read the article

  • Why does this login fail for user 'Servername\Guest'?

    - by Metassebia
    I install SQL Server 2005 EXPRESS edition on one computer, Computer Name = 'MyServe' and Database name='MyDB',take it as database server. it is configured as both Database and Windows Authentication Mode. with username=sa and password=adminaa. I have application in C#.Net my connection string is ConnectionString = "Data Source=MyServe\SQLEXPRESS;Initial Catalog=MyDB;Integrated Security=True;User ID=sa;Password=adminaa"; when I run the application on the computer called MyServe, the database server, it works well, while when I install the application on different computer, when it tries to connect the database it gives an error called "login failed for user 'MyServe\Guest" what is wrong with configuration in the database server or other mistakes. please help me. thankyou in advance. Metasebia

    Read the article

  • Update a DNS to a for a dynamic IP

    - by zobgib
    I want to use my schools connection as a place to host a small webserver but one problem I have run into is anytime my server reboots I am given a new IP inside the schools range. All of the schools IP are public and therefor I can access my computer directly over WAN just via the IP given in ifconfig. I would like to be able to give my computer a dns which is easy enough when I change the Arecords to match the current IP of my computer. The problem is if my computer ever reboots (my school regularly cycles power at night and over holidays) I am assigned a new IP and have to realize it then update the Arecords This is inconvenient and I figure there must be a better way to keep the DNS records updated either via a script or my own BIND server. That way if there is a power cycle I can still access the server via a Domain Name. If you have any direction to point me in it would be much appreciated. I am running Ubuntu 10.04 if that helps :).

    Read the article

  • Cross-reference of computers having virtualization technology [closed]

    - by msorens
    When considering obtaining a new computer one of my prerequisites is the ability to load Windows 8 in a virtual machine (using VirtualBox). A prerequisite for that is that the host computer have virtualization technology. I located an Intel cross reference of chips having virtualization technology but I am trying to find a "higher level" cross reference between computer models and virtualization technology availability, skipping the extra step of having to first look up what CPU chip is in a machine, then cross-referencing that on Intel's list.

    Read the article

  • I cannot boot Ubuntu from WUBI install with windows 7, get an error message every time

    - by Tom
    i have tried several times to install ubuntu using wubi, i can't use a disc as i have a notebook computer and there is no optical drive. the download and installation all seem to work well but whenever i try to boot ubuntu at the windows 7/ubuntu menu it comes up with this error screen. I have used both the C: drive and the D: drive to install Ubuntu several times each, it's always unsuccessful. "Windows has failed to start. a recent hardware or software change might be the cause. To fix the problem: Insert your windows installation disc and restart your computer Choose your language settings and then click 'next' Click repair your computer. If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \ubuntu\winboot\wubildr.mbr Status: 0xc000000F Info: The selected entry could not be loaded because the application is missing or corrupt." I use an ASUS x501a with windows 7. What do i do to fix this? I want to be able to dual boot Windows 7 and ubuntu. Thanks a lot :)

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >