Search Results

Search found 12696 results on 508 pages for 'heap memory'.

Page 124/508 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• Upgrading RAM on a P4 2.8GHz with P4G8X+ ASUS mobo?

  - by iftrue

  I want to upgrade the RAM on an old machine with a P4G8X+ motherboard. Currently, it has 2 512 DDR PC2700 sticks. What's the best RAM I can use on this machine? I'm trying to upgrade my brother's old computer. Help?

  Read the article

• What precautions should I take once defective RAM has been replaced?

  - by DustByte

  I recently discovered that my RAM is faulty (MemTest86+). I am waiting for new RAM to be sent to me.  It was through sheer luck that I discovered something was wrong. I was copying a large amount of big files and decided to verify the copies by their checksums. I discovered strange discrepancies, and noticed that checksum computation for the same file was not consistent. Now, this is the only problem I have encountered; no BSOD, no crashes, no errors. In a sense this makes me more worried than if I would have had massive crashes. I have no idea for how long the RAM has been faulty, and I have no idea if corrupt bits have been saved into files on my hard drives. I do know the RAM was fine two months ago (tested it back then). I am a user of Adobe's Lightroom and I am worried that photos or the catalog itself could carry corrupt data. Question: what should I do once new healthy RAM has been installed? Reinstall Windows (I'm using Windows 7, 64 bit)? Is there a risk that I will be presented with nasty surprises in the future if I don't? What about personal files? I have backups of some of the files but for newer files I'm not sure I can even trust the backups. It's going to take me many hard hours to manually replace files with older versions, or compare checksums.

  Read the article

• diagnosing random power down crashes on a hackintosh [closed]

  - by Iain

  I have a hackintosh running on a Gigabyte P55M UD2. It has run without a single issue as a hackintosh for about 9 months, and the machine is about 2.75 years old. Never had issues when it was just linux box. Power supply is 750 Watts. It recently started spontaneously rebooting, no seeming connected to any particular use case or ram/cpu load. There is no hanging or anything, just suddenly acts like the power went out. The frequency of which seems to be increasing. I've tried using just one of each of the two ram sticks, and it happens with either one in. I'm not sure what to try next, is there some way of determinging whether it's a mobo, cpu, or powersupply issue short of replacing them all? thanks! Iain

  Read the article

• Only half of RAM is recognized by BIOS

  - by Rick Crawford

  I got a Gigabyte GA-P35-DS3 mainboard. Some time ago I noticed that Windows only showed 2GB instead of 4GB. I don't know exactly what caused it anyway. I tried putting in each of the 4 x 1GB RAM modules one by one, and tried every slot one by one, until every stick and slot worked. However, then I tried adding one more at a time, and it kept showing 1GB, until I put in all 4, where it only showed 2 GB instead of 4 (in BIOS and windows 7 64bit). I tried replacing the BIOS battery since I've read that low battery could cause it. It didn't help though. I also bought 4GB new RAM (yes, it's supported, I checked it), and it's still the same, it only shows 2GB (or 3GB, when I put in 4 of the new and 2 of the old). I also did the latest BIOS update, and used default BIOS settings, but nothing of that helped. When my PC boots it shows "RAM modules used 2 and 3", when 4 sticks are in - or "0 and 1", when only 2 are in.

  Read the article

• Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

  - by Lloyd Watkin

  I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

  Read the article

• Windows XP + PAE + 6GB RAM: See more than 3.5GB?

  - by nonot1

  Firstly let me say I've seen a number of similar questions on SuperUser, and I don't think this is a duplicate. (Most address 4GB RAM installed. I have 6GB) I have Windows XP 32-bit running on a i7-based Xeon system with 6GB of RAM. I only see 3.5GB of RAM in Windows. Is there any way to squeeze more visible RAM out of this set up? Even an extra 1GB would be great. Does having 6GB (vs 4GB) of RAM installed help at all? (I.e Even if I loose the 3.5-4.0 GB region, can I use the area above it?) P.S. Will eventually move to Windows 7 64-bit, but can't for now.

  Read the article

• What are the specifications on the RAM inside my computer?

  - by Faken

  I have a Dell Dimension 9200 that I bought 4 years ago. I want to find out the exact specifications (manufacturer, speed, timings, etc.). Is there a way to get this specific info without having to open up the PC (it's buried in and under a bunch of furniture, I'd perfer not to have to dig it out). All I know about it right now is that it is 4 1GB sticks of DDR2 RAM at 667 Mhz. It is the standard RAM that shipped with the computer 4 years ago (from Dell). Does anyone know what the specifications are of the RAM that Dell used in this particular model of computer 4 years ago? Note: I've done my research before coming here. CPU-Z, EVEREST, and AIDA32 all have been unable to give me any more information other than 4 x 1GB @ 667Mhz. I can't find any specifications in the Dell online manuals either (at least not as specific as I want). Thanks -Faken

  Read the article

• A brief note for customers running SOA Suite on AIX platforms

  - by christian

  When running Oracle SOA Suite with IBM JVMs on the AIX platform, we have seen performance slowdowns and/or memory leaks. On occasion, we have even encountered some OutOfMemoryError conditions and the concomittant Java coredump. If you are experiencing this issue, the resolution may be to configure -Dsun.reflect.inflationThreshold=0 in your JVM startup parameters. https://www.ibm.com/developerworks/java/library/j-nativememory-aix/ contains a detailed discussion of the IBM AIX JVM memory model, but I will summarize my interpretation and understanding of it in the context of SOA Suite, below. Java ClassLoaders on IBM JVMs are allocated a native memory area into which they are anticipated to map such things as jars loaded from the filesystem. This is an excellent memory optimization, as the file can be loaded into memory once and then shared amongst many JVMs on the same host, allowing for excellent horizontal scalability on AIX hosts. However, Java ClassLoaders are not used exclusively for loading files from disk. A performance optimization by the Oracle Java language developers enables reflectively accessed data to optimize from a JNI call into Java bytecodes which are then amenable to hotspot optimizations, amongst other things. This performance optimization is called inflation, and it is executed by generating a sun.reflect.DelegatingClassLoader instance dynamically to inject the Java bytecode into the virtual machine. It is generally considered an excellent optimization. However, it interacts very negatively with the native memory area allocated by the IBM JVM, effectively locking out memory that could otherwise be used by the Java process. SOA Suite and WebLogic are both very large users of reflection code. They reflectively use many code paths in their operation, generating lots of DelegatingClassLoaders in normal operation. The IBM JVM slowdown and subsequent OutOfMemoryError are as a direct result of the Java memory consumed by the DelegatingClassLoader instances generated by SOA Suite and WebLogic. Java garbage collection runs more frequently to try and keep memory available, until it can no longer do so and throws OutOfMemoryError. The setting sun.reflect.inflationThreshold=0 disables this optimization entirely, never allowing the JVM to generate the optimized reflection code. IBM JVMs are susceptible to this issue primarily because all Java ClassLoaders have this native memory allocation, which is shared with the regular Java heap. Oracle JVMs don't automatically give all ClassLoaders a native memory area, and my understanding is that jar files are never mapped completely from shared memory in the same way as IBM does it. This results in different behaviour characteristics on IBM vs Oracle JVMs.

  Read the article

• System beeps continuously if both RAM sticks inserted

  - by JGB146

  I have two sticks of OCZ 2GB PC2 9600 RAM. When I attempt to boot with both sticks inserted, I am met with a continuous string of system beeps (and no bootup). The system boots fine when only one stick is inserted, but obviously that leaves me with less RAM than I'd like to have. What could the problem be? System specs are: Gigabyte GA-EP45-UD3L Intel Core 2 Quad Q9400 Sticks of OCZ 2GB PC2 9600 RAM Zotac GeForce GTS 250 1GB 2x Seagate 500GB SATA HDs

  Read the article

• USB Virtual RAM is not working properly

  - by Haseeb Anwar

  This images are help u in solving my question.1I have installed Windows 7 64 bit. I have made a virtual USB RAM but it is not working properly. First I go to the USB PropertiesReady Boost. Use this device as a virtual RAM and then click Apply then Ok. then I go to My Computer PropertiesAdvance system settingsAdvance(tab)SettingsAdvanceChange. When i click on change button the USB is not here. What can I do. Please answer my question.

  Read the article

• Rail's FileStore with Linux Disk Caching or RAMdisk?

  - by Yo Ludke

  I have a Ruby on Rails application that stores it's catched files on the filesystem (Rails file-system cache). I was thinking about changing to memcached Store, but a short test shows it isn't a big difference in speed. From linuxatemyram.com I learned a bit about file caching. On the current machine there would be around 40..45GB RAM left which isn't needed for the application and which can be used to linux-disk-cache this rails file cache store. The disk is a RAID10 system with almost 120MB disk perfomance. How can I tell Linux to use free RAM more deliberately and not to be shy about using it? Do think it's necessary to adjust a sysyctl/.. value here, or would I have performance advantages to put the File Store root diretory on a ramdisk? (Loosing the cache during a reboot wouldn't be a problem)

  Read the article

• CPU Test Similar to Memtest?

  - by Nick Whaley

  I need an easy way to do system stability tests. I have come to rely on Prime95 which does a fantastic job of proving stability (or instability) very quickly; but it requires an OS installed. I would like something like Prime95 that stresses both CPU and RAM (maybe PCI-Ex bus also?) but runs in a nice bootable binary like Memtest86+ does, so I can boot it from a thumbdrive. Does such a thing exist?

  Read the article

• Reducing both pagfile.sys and hiberfil.sys in Windows 7

  - by greenber

  I recently used Defraggler to consolidate my free space areas on my D: drive preparatory to using Disk Manager to break my drive into two areas, one as my "data area" for Windows 7 (normally on my C: drive) and to experiment around with Windows 8. The Defraggler program works so well I ran it on my C: drive and I ended up with a lot of free space both on my C: drive and my D: drive. I was very happy. And then I woke up the next day and I've got virtually no free space left, something like 8 MB on my C: drive and about 3 GB on my D: drive. I then ran Wintree (which gives a nifty graphical representation of disk usage) and found I had a large page file and a large hiberfil. So I temporarily turned off hibernate and reduced the page file size to 2000megabytes and then rebooted so that both would take effect. It had no effect on the C: drive or the D: drive. That makes no sense to me. What caused the free space on each drive to disappear, why doesn't the page file size being reduced and the hibernate file being turned off free up disk space to either the C: or the D: drive? Would it make sense to delete the two files in question and, if so, how do I go about doing that? Safe mode? Thanks. Ross

  Read the article

• Calculating RAM Performance? Example: DDR3-2133 CL9-11-10-28 1.65V vs DDR3-1600 CL10-10-10-30 1.5V

  - by user1131467

  How do you calculate the relative performance of PC RAM? For example, what is the relative performance of the following: G.Skill Ripjaws Z 8 x 4GB Kit, DDR3-2133, [email protected] G.Skill Ripjaws Z 4 x 8GB Kit, DDR3-1600, [email protected] If it's relevant, when they are used in a top of the line ASUS Rampage IV Extreme motherboard and Intel i7 3960X? By performance, I mean relative: read latency write latency read bandwidth write bandwidth Please include working. (I mean how did you arrive at the figures based on timing and DDR3-speed)

  Read the article

• PC wont boot with more than 1 stick of RAM.

  - by Aidan

  Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

  Read the article

• PC wont boot with more than 1 stick of RAM.

  - by Aidan

  Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

  Read the article

• Will a higher hard drive size affect performance

  - by user273010

  My laptop came with a 500 GB hard drive. I use my laptop for storing my digital photographs, and only have about 14 GB of file storage left on the original hard drive. I have a 750 GB external hard drive, but am leery of relying on it for primary storage as I tend to knock things over and it has already crashed once and I lost a lot of the files. I am looking at a 1 TB internal hard drive, but am concerned if storing so much data will affect the computer's performance. Should I also increase RAM from 4 to 8 GB (the limit for my 64-bit, Windows 7, Asus A54C laptop)?

  Read the article

• Is there a list of Windows services that can be turned off to save resources?

  - by scunliffe

  Every time I open up my task manager and look at the tasks running, it appears to me that there has got to be a bunch of junk running in there that I don't want or need and would be better off turning off (e.g. set the service to manual vs. automatic) In particular I'm running Windows XP, but I'd be interested in services for any version. e.g. Service: ThinkPad PM Service What is it: The ibmpmsvc.exe process is installed by default on IBM Notebook computers. It allows various functions of your IBM notebook to be controlled using the blue Fn keys. If you use the blue Fn keys on your Notebook, you should leave this process running. Otherwise, if it is causing problems for your system you should terminate the ibmpmsvc.exe process. (source) Thus for me, (having never used, or intending to use these buttons) - I want to turn it off. There's lots that just seem painfully unnecessary to me... I'm just not sure which ones I can "safely" stop/disable without issues... "Alerter", "ClipBook", "Messenger", "Telnet", "ATI Hotkey Poller", "Office Source Engine", etc. I'd appreciate any info on services that are truly unnecessary, or only useful to certain people/types of users.

  Read the article

• let mysql use full resources

  - by shekhar

  We have a Windows server 2008 R2. It has 24GB RAM and 2.926 Mhz, 8 Core(s), 8 Logical Process. We have a large MySQL database and it's taking a lot of time to execute some queries. But while running queries, I have observed it's NOT utilizing full resources. I am thinking that if I let MySQL utilize maximum resources on my server, it can reduce execution time. How can I let my MySQL server utilize maximum resources in a healthy way?

  Read the article

• GNOME/KDE Linux entirely in RAM?

  - by František Žiacik

  Hi. I'd like to have very responsive linux but I also like modern, elegant and functional desktops like gnome or kde, not the lightweight ones like xfce or lxde. Once I tried PuppyLinux and was impressed by the responsivity when I clicked an application. In my Ubuntu, it bothers me much when I click chromium and must wait 5 seconds of disk flashing until main window appears. Or evolution or anything else. Is it possible to make GNOME or KDE run entirely in RAM like PuppyLinux (of course, I mean frequently used applications and services, not all) if you have enough of it? I don't care if boot time is longer. I tried using "preload" but it didn't help much.

  Read the article

• SSD technology - MLC vs SLC

  - by jasondavis

  SSD MLC vs SLC? SLC SSD drives cost a lot more than MLC SSD drives. What are the differences besides cost?

  Read the article

• How do I find the source of soft page faults?

  - by David Robison

  I have Windows 7 x64 computer that according to Performance Monitor has 70,000 page faults / second when idling. That's seems like a lot to me (every other computer I check has basically 0 page faults / second when idling). If I use Resource Monitor or Process Explorer to check hard faults, I see that they are basically 0. So all the page faults are soft. Normally, soft page faults are not a problem, but I suspect they might be causing issues for this computer given there are so many. I would like to identify what programs are causing the soft faults. Are there any tools that exist the display the number of soft page faults for each process?

  Read the article

• Running out of LowMem with Ubuntu PAE Kernel and 32GB of RAM

  - by magneticMonster

  I'm running a Java data import process on a 32-bit Ubuntu 10 PAE kernel machine. After running the process for a while, the oom-killer zaps my Java process. After some Googling and digging through docs, it looks like the system is running out of LowMem. I started the process for the third time and am watching free -lm show me Low: 464 386 77 with the free value (77MB) slowly decreasing. Why am I running out of lowmem and how do I increase it? Some details: $ cat /proc/sys/vm/lowmem_reserve_ratio 256 256 32 $ free -lm total used free shared buffers cached Mem: 32086 24611 7475 0 0 24012 Low: 464 407 57 High: 31621 24204 7417 -/+ buffers/cache: 598 31487 Swap: 2047 0 2047

  Read the article

• Le "In-Memory" débarque dans SQL Server, Microsoft muscle Excel pour la BI et annonce le SP1 de SQL Server 2012 au Pass Summit 2012

  Pass Summit 2012 : Microsoft dote SQL Server d'une base de données In-Memory et annonce la disponibilité du SP 1 de SQL Server 2012 et SQL Server 2012 PDW Microsoft a profité de son salon Pass Summit 2012 dédié à SQL Server pour dévoiler sa vision d'une plateforme de gestion de données moderne. L'éditeur à travers plusieurs annonces a renouvelé son engagement d'aider ses clients à mieux exploiter leurs données, qu'elles soient structurées ou non structurées, où qu'elles se trouvent et quelle que soit leur taille. L'annonce phare qui a marqué l'ouverture du Pass Summit 2012 a été la présentation d'une nouvelle technologie de base de données transactionnelles in-Memory

  Read the article

• Would Windows 8 may increase the Cap of more than 2 GB?

  - by Pisaro

  I have a old Laptop Dell Latitude D430 that I just upgraded to Windows 8. The Ram that I have installed is 2GB (Max Ram that this laptop can handle) but I am wondering if by installing windows 8 can help also to increase the cap of the total Ram that the laptop can handle. I know that some laptops have a cap of RAM by the Bios but I am wondering if any of you know if by installing a new OS can actually change this? thanks, Robert

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >