Search Results

Search found 3784 results on 152 pages for 'push'.

Page 124/152 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

• What can I read from the iPad Camera Connection Kit?

  - by HELVETICADE

  I'm building a small controller device that I'd like to partner with a computer. I've settled on using OSC out from my custom built hardware and am pretty satisfied with what I can get from WOscLib. Two goals I'd like to achieve are portability and a very ratio between battery:computing power, and this has lured me towards using iPhoneOS to accomplish my goals. I think the iPad would suit my needs perfectly, except that using wifi to broadcast OSC out from my device requires a third device and would destroy the goal of portability, whilst also introducing potential latency and stability headaches. My question is pretty simple: Can I push my OSC-out FROM my controller TO an iPad via USB and the Camera Connection Kit? If I could accomplish this, the two major goals of my project would be fulfilled very nicely. This seems like it should be a simple little question, but researching this obsessively over the past few weeks has left me more almost more uncertain than if I had done no research at all. I'd really like some more confidence before I go down this route, and it seems like it should be possible. Any insight would be very, very appreciated.

  Read the article

• Javascript getElementsByTagName broken firefox?

  - by Sheldon Ross

  I'm getting the weirdest issues with Javascript in Firefox today. I'm trying to manipulate some table rows, but .getElementsByTagName("tr"); is pulling back junk. dynamicTable.tableBody = dynamicTable.getElementsByTagName("tbody")[0]; var tableRows = dynamicTable.tableBody.getElementsByTagName("TR"); var actualTableRows = new Array(); for(var i in tableRows) { var row = tableRows[i]; alert(row.tagName); if(row.tagName == "TR"){ actualTableRows.push(row); } } dynamicTable.bodyRows = actualTableRows; The puzzling part of course is my temporary hack to fix the error. For some reason .getElementsByTagName("tr") is pulling back some functions also. Incidently the alert above goes something like this TR TR TR TR undefined undefined undefined. The code I wanted was something like this dynamicTable.bodyRows = dynamicTable.tableBody.getElementsByTagName("tr"); But then bodyrows does not contain just tr elements it has the aforementioned junk in it. Any thoughts?

  Read the article

• How to deserialize implementation classes in OSGi

  - by Daniel Schneller

  In an eRCP OSGi based application the user can push a button and go to a lock screen similar to that of Windows or Mac OS X. When this happens, the current state of the application is serialized to a file and control is handed over to the lock screen. In this mobile application memory is very tight, so we need to get rid of the original view/controller when the lock screen comes up. This works fine and we end up with a binary serialized file. Once the user logs back in, the file is read in again and the original state of the application restored. This works fine as well, except when the controller that was serialized contained a reference to an object which comes from a different bundle. In my concrete case the original controller (from bundle A) can call a web service and gets a result back. Nothing fancy, just some Strings and Numbers in a simple value holder class. However the controller only sees this as a Result interface; the actual runtime object (ResultImpl) is defined and created in a different bundle (bundle B, the webservice client implementation) and returned via a service call. When the deserialization now tries to thaw the controller from the file, it throws a ClassNotFound exception, complaining about not being able to deserialize the result object, because deserialization is called from bundle A, which cannot see the ResultImpl class from bundle B. Any ideas on how to work around that? The only thing I could come up with is to clone all the individual values into another object, defined in the controller's bundle, but this seems like quite a hassle.

  Read the article

• Is there a way to stop a UIViewController from being popped from a UINavigationController's stack wh

  - by yabada

  I have a UINavigationController with a root view controller and then I push a UIViewController onto the navigation controller's stack. When the user taps the backBarButtonItem I'd like to be able to have an alert view pop up if there are certain conditions met and cancel the pop of the view controller. For example, the user can make certain selections but some combination of them may be invalid so I want to notify them to make changes. I know that I can prevent the user from making an invalid combination or have an alert view pop up when the invalid combination is selected but I'd rather not do that. The user may be changing selections and may be aware that a certain combination is invalid but I'd rather let them select something that makes the combination invalid then go change something else (and notify them if they haven't made changes before trying to go to the previous screen). For example, if I prevent them from make the invalid combination then they may have to scroll up on a screen, change something, then scroll back down instead of making a selection then scrolling up and changing something. Using viewWillDisappear: doesn't work because, although I can produce an alert view, I cannot figure out a way to prevent the pop from occurring. The alert view pops up but the view controller still pops and they are back to the root view controller (with the alert view displaying). Is there a way to prevent the pop from occurring? If not, is this something worth filing a bug report about or is this unnecessary and/or esoteric?

  Read the article

• Jquery Bugs?? Long decimal number after two numbers multiply...

  - by Jerry

  Hi all I am working on a shopping site and I am trying to calculate the subtotal of products. I got my price from a array and quantity from getJSON response array. Two of them multiply comes to my subtotal. I can change the quantity and it will comes out different subtotal. However,when I change the quantity to certain number, the final subtotal is like 259.99999999994 or some long decimal number. I use console.log to check the $price and $qty. Both of them are in the correct format ex..299.99 and 6 quantity.I have no idea what happen. I would appreciate it if someone can help me about it. Here is my Jquery code. $(".price").each(function(index, price){ $price=$(this); //get the product id and the price shown on the page var id=$price.closest('tr').attr('id'); var indiPrice=$($price).html(); //take off $ indiPrice=indiPrice.substring(1) //make sure it is number format var aindiPrice=Number(indiPrice); //push into the array productIdPrice[id]=(aindiPrice); var url=update.php $.getJSON( url, {productId:tableId, //tableId is from the other jquery code which refers to qty:qty}, productId function(responseProduct){ $.each(responseProduct, function(productIndex, Qty){ //loop the return data if(productIdPrice[productIndex]){ //get the price from the previous array we create X Qty newSub=productIdPrice[productIndex]*Number(Qty); //productIdPrice[productIndex] are the price like 199.99 or 99.99 // Qty are Quantity like 9 or 10 or 3 sum+=newSub; newSub.toFixed(2); //try to solve the problem with toFixed but didn't work console.log("id: "+productIdPrice[productIndex]) console.log("Qty: "+Qty); console.log(newSub); **//newSub sometime become XXXX.96999999994** }; Thanks again!

  Read the article

• Real time embeddable http server library required

  - by Howard May

  Having looked at several available http server libraries I have not yet found what I am looking for and am sure I can't be the first to have this set of requirements. I need a library which presents an API which is 'pipelined'. Pipelining is used to describe an HTTP feature where multiple HTTP requests can be sent across a TCP link at a time without waiting for a response. I want a similar feature on the library API where my application can receive all of those request without having to send a response (I will respond but want the ability to process multiple requests at a time to reduce the impact of internal latency). So the web server library will need to support the following flow 1) HTTP Client transmits http request 1 2) HTTP Client transmits http request 2 ... 3) Web Server Library receives request 1 and passes it to My Web Server App 4) My Web Server App receives request 1 and dispatches it to My System 5) Web Server receives request 2 and passes it to My Web Server App 6) My Web Server App receives request 2 and dispatches it to My System 7) My Web Server App receives response to request 1 from My System and passes it to Web Server 8) Web Server transmits HTTP response 1 to HTTP Client 9) My Web Server App receives response to request 2 from My System and passes it to Web Server 10) Web Server transmits HTTP response 2 to HTTP Client Hopefully this illustrates my requirement. There are two key points to recognise. Responses to the Web Server Library are asynchronous and there may be several HTTP requests passed to My Web Server App with responses outstanding. Additional requirements are Embeddable into an existing 'C' application Small footprint; I don't need all the functionality available in Apache etc. Efficient; will need to support thousands of requests a second Allows asynchronous responses to requests; their is a small latency to responses and given the required request throughput a synchronous architecture is not going to work for me. Support persistent TCP connections Support use with Server-Push Comet connections Open Source / GPL support for HTTPS Portable across linux, windows; preferably more. I will be very grateful for any recommendation Best Regards

  Read the article

• PHP arrays - How to 1-dimensional array into nested multidimensional array?

  - by sombe

  When retrieving a hierarchical structure from MySQL (table with one ID column and one PARENT column signifying the hierarchical relationships), I map the result into an enumerated array as follows (for this example the numbers are arbitrary): Array ( [3] => Array ( [7] => Array () ), [7] => Array ( [8] => Array () ) ) Notice 3 is the parent of 7, and 7 is the parent of 8 (this could go on and on; and any parent could have multiple children). I wanted to shrink this array into a nested multidimensional array as follows: Array ( [3] => Array ( [7] => Array ( [8] => Array () ) ) ) That is, each NEW id is automatically assigned an empty array. Regardless, any ID's children will be pushed into their parent's array. Take a look at the following illustration for further clarification: This will probably result in a complicated recursive operation, since I always have to check whether a parent with any certain ID already exists (and if so, push the value into its array). Is there a built-in php function that can assist me with this? Do you have any idea as to how to go about constructing this? For what it's worth I'm using this to built a navigation bar in wordpress (which can contain categories, subcategories, posts... essentially anything).

  Read the article

• Noob - Cycle through stored names and skip blanks

  - by ActiveJimBob

  NOOB trying to make my code more efficient. On scroll button push, the function 'SetName' stores a number to integer 'iName' which is index against 5 names stored in memory. If a name is not set in memeory, it skips to the next. The code works, but takes up a lot of room. Any advice appreciated. Code: #include <string.h> int iName = 0; int iNewName = 0; BYTE GetName () { return iName; } void SetName (int iNewName) { while (iName != iNewName) { switch (byNewName) { case 1: if (strlen (memory.m_nameA) == 0) new_name++; else iName = iNewName; break; case 2: if (strlen (memory.m_nameB) == 0) new_name++; else iName = iNewName; break; case 3: if (strlen (memory.m_nameC) == 0) new_name++; else iName = iNewName; break; case 4: if (strlen (memory.m_nameD) == 0) new_name++; else iName = iNewName; break; case 5: if (strlen (memory.m_nameE) == 0) new_name++; else iName = iNewName; break; default: iNewName = 1; break; } // end of case } // end of loop } // end of SetName function void main () { while(1) { if (Button_pushed) SetName(GetName+1); } // end of infinite loop } // end of main

  Read the article

• Get location of element you just pushed into vector C++

  - by Satchmo Brown

  I am curious about how pushing back into a vector works. I want a way to push back an element and then be able to add it's location in the vector to a double array serving as a type of map. Something like this: // Create a bomb Bomb b; b.currentTime = SDL_GetTicks(); b.explodeTime = SDL_GetTicks() + 3000; b.owner = player; b.power = 2; b.x = x; b.y = y; bombVec.push_back(b); bombs[y][x] = THIS_IS_WHAT_I_WANT; This way when I explode the bomb, I can check the map and then have an ID in the vector to deal with. Every non bomb square will have a -1. Also, just curious. Imagine I have 3 elements in a vector. I delete the second one and then add another. Does the new element go in the same location as the one that was deleted? Thanks!

  Read the article

• How do I post a .wav file from CS5 Flash, AS3 to a Java servlet?

  - by Muostar

  Hi, I am trying to send a byteArray from my .fla to my running tomcat server integrated in Eclipse. From flash I am using the following code: var loader:URLLoader = new URLLoader(); var header:URLRequestHeader = new URLRequestHeader("audio/wav", "application/octet-stream"); var request:URLRequest = new URLRequest("http://localhost:8080/pdp/Server?wav=" + tableID); request.requestHeaders.push(header); request.method = URLRequestMethod.POST; request.data = file;//wav; loader.load(request); And my java servlet looks as follows: try{ int readBytes = -1; int lengthOfBuffer = request.getContentLength(); InputStream input = request.getInputStream(); byte[] buffer = new byte[lengthOfBuffer]; ByteArrayOutputStream output = new ByteArrayOutputStream(lengthOfBuffer); while((readBytes = input.read(buffer, 0, lengthOfBuffer)) != -1) { output.write(buffer, 0, readBytes); } byte[] finalOutput = output.toByteArray(); input.close(); FileOutputStream fos = new FileOutputStream(getServletContext().getRealPath(""+"/temp/"+wav+".wav")); fos.write(finalOutput); fos.close(); When i run the flash .swf file and send the bytearray to the server, I receive following in the server's console window:: (loads of loads of Chinese symbols) May 20, 2010 7:04:57 PM org.apache.tomcat.util.http.Parameters processParameters WARNING: Parameters: Character decoding failed. Parameter '? (loads of loads of Chinese symbols) and then looping this for a long time. It is like I recieve the bytes but not encoding/decoding them correctly. What can I do?

  Read the article

• javaScript .splice() not working on correctly

  - by adardesign

  I am setting a cookie for each navigation container that is clicked on. It sets an array that is joined and set the cookie value. if its clicked again then its removed from the array. It somehow buggy. It only splices after clicking on other elements. and then it behaves weird. Thanks much. var navLinkToOpen; var setNavCookie = function(value){ var isSet = false; var checkCookies = checkNavCookie() setCookieHelper = checkCookies? checkCookies.split(","): []; console.log("value passed", value) for(i in setCookieHelper){ if(value == setCookieHelper[i]){ setCookieHelper.splice(value,1); isSet = true; } } if(!isSet){ setCookieHelper.push(value) } setCookieHelper.join(",") document.cookie = "navLinkToOpen"+"="+setCookieHelper; } var checkNavCookie = function(){ var allCookies = document.cookie.split( ';' ); for (i = 0; i < allCookies.length; i++ ){ temp = allCookies[i].split("=") if(temp[0].match("navLinkToOpen")){ var getValue = temp[1] } } return getValue || false } $(document).ready(function() { $("#LeftNav li").has("b").addClass("navHeader").not(":first").siblings("li").hide() $(".navHeader").click(function(){ $(this).toggleClass("collapsed").nextUntil("li:has('b')").slideToggle(300); setNavCookie($('.navHeader').index($(this))) return false }) console.log("init",document.cookie) var testCookies = checkNavCookie(); if(testCookies){ finalArrayValue = testCookies.split(",") for(i in finalArrayValue){ $(".navHeader").eq(finalArrayValue[i]).toggleClass("collapsed").nextUntil(".navHeader").slideToggle (0); } } });

  Read the article

• Identify server that made call to web service

  - by sleepybobos

  I am working within an intranet environment. We have both a production and development sharepoint server (WSS 3). We have a 3rd party workflow product which runs on top of sharepoint. It is installed on both the production and development sharepoint servers. The workflow product can call web services I have written which are hosted on our web server. How would I have the web services determine which sharepoint server made the call to the web service, be it the production or development server? I would then use this information to server specific information from web.config or database etc. Currently the site hosting web services is setup to allow anonymous access so code such as System.Web.HttpContext.Current.User.Identity.Name; returns and empty string. If windows authenticaion is used it returns the identity of the currently logged in user, which is no user in identifying the server the call was made from. I need a push in the right direction to address what I believe is probably a common scenario please.

  Read the article

• How to generate XML from an Excel VBA macro?

  - by SuperNES

  So, I've got a bunch of content that was delivered to us in the form of Excel spreadsheets. I need to take that content and push it into another system. The other system takes its input from an XML file. I could do all of this by hand (and trust me, management has no problem making me do that!), but I'm hoping there's an easy way to write an Excel macro that would generate the XML I need instead. This seems like a better solution to me, as this is a job that will need to be repeated regularly (we'll be getting a LOT of content in Excel sheets) and it just makes sense to have a batch tool that does it for us. However, I've never experimented with generating XML from Excel spreadsheets before. I have a little VBA knowledge but I'm a newbie to XML. I guess my problem in Googling this is that I don't even know what to Google for. Can anyone give me a little direction to get me started? Does my idea sound like the right way to approach this problem, or am I overlooking something obvious? Thanks StackOverflow!

  Read the article

• How to efficiently store and update binary data in Mongodb?

  - by Rocketman

  I am storing a large binary array within a document. I wish to continually add bytes to this array and sometimes change the value of existing bytes. I was looking for some $append_bytes and $replace_bytes type of modifiers but it appears that the best I can do is $push for arrays. It seems like this would be doable by performing seek-write type operations if I had access somehow to the underlying bson on disk, but it does not appear to me that there is anyway to do this in mongodb (and probably for good reason). If I were instead to just query this binary array, edit or add to it, and then update the document by rewriting the entire field, how costly will this be? Each binary array will be on the order of 1-2MB, and updates occur once every 5 minutes and across 1000s of documents. Worse, yet there is no easy way to spread these out (in time) and they will usually be happening close to one another on the 5 minute intervals. Does anyone have a good feel for how disastrous this will be? Seems like it would be problematic. An alternative would be to store this binary data as separate files on disk, implement a thread pool to efficiently manipulate the files on disk, and reference the filename from my mongodb document. (I'm using python and pymongo so I was looking at pytables). I'd prefer to avoid this though if possible. Is there any other alternative that I am overlooking here? Thanks in advnace.

  Read the article

• C++: calling non-member functions with the same syntax of member ones

  - by peoro

  One thing I'd like to do in C++ is to call non-member functions with the same syntax you call member functions: class A { }; void f( A & this ) { /* ... */ } // ... A a; a.f(); // this is the same as f(a); Of course this could only work as long as f is not virtual (since it cannot appear in A's virtual table. f doesn't need to access A's non-public members. f doesn't conflict with a function declared in A (A::f). I'd like such a syntax because in my opinion it would be quite comfortable and would push good habits: calling str.strip() on a std::string (where strip is a function defined by the user) would sound a lot better than calling strip( str );. most of the times (always?) classes provide some member functions which don't require to be member (ie: are not virtual and don't use non-public members). This breaks encapsulation, but is the most practical thing to do (due to point 1). My question here is: what do you think of such feature? Do you think it would be something nice, or something that would introduce more issues than the ones it aims to solve? Could it make sense to propose such a feature to the next standard (the one after C++0x)? Of course this is just a brief description of this idea; it is not complete; we'd probably need to explicitly mark a function with a special keyword to let it work like this and many other stuff.

  Read the article

• Rails - any fancy ways to handle 404s?

  - by jyoseph

  I have a rails app I built for an old site I converted from another cms (in a non-rails language, hehe). Most of the old pages are mapped to the new pages using routes.rb. But there are still a few 404s. I am a rails newb so I'm asking if there are any advanced ways to handle 404s. For example, if I was programming in my old language I'd do this: Get the URL (script_name) that was being accessed and parse it. Do a lookup in the database for any keywords, ids, etc found in the new URL. If found, redirect to the page (or if multiple records are found, show them all on a results page and let user choose). With rails I'd probably want to do :status = :moved_permanently I'm guessing? If not found, show a 404. Are there any gems/plugins or tutorials you know of that would handle such a thing, if it's even possible. Or can you explain on a high level how that can be done? I don't need a full code sample, just a push in the right direction. PS. It's a simple rails 3 app that uses a single Content model.

  Read the article

• Drupal administration theme doesn't apply to Blocks pages (admin/build/block)

  - by hfidgen

  A site I'm creating for a customer in D6 has various images overlaying parts of the main content area. It looks very pretty and they have to be there for the general effect. The problem is, if you use this theme in the administration pages, the images get in the way of everything. My solution was to create a custom admin theme, based on the default one, which has these image areas disabled in the output template files - page.tpl.php The problem is that when you try and edit the blocks page, it uses the default theme and half the blocks admin settings are unclickable behind the images. I KNOW this is by design in Drupal, but it's annoying the hell out of me and is edging towards "bug" rather than "feature" in my mind. It also appears that there is no way of getting around it. You can edit /modules/blocks/block.admin.inc to force Drupal to show the blocks page in the chosen admin theme. BUT whichever changes you then make will not be transferred to the default theme, as Drupal treats each theme separately and each theme can have different block layouts. :x function block_admin_display($theme = NULL) { global $custom_theme; // If non-default theme configuration has been selected, set the custom theme. // $custom_theme = isset($theme) ? $theme : variable_get('theme_default', 'garland'); // Display admin theme $custom_theme = variable_get('admin_theme', '0'); // Fetch and sort blocks $blocks = _block_rehash(); usort($blocks, '_block_compare'); return drupal_get_form('block_admin_display_form', $blocks, $theme); } Can anyone help? the only thing I can think of is to push the $content area well below the areas where the image appear and use blocks only for content display. Thanks!

  Read the article

• How to keep track of objects for garbage collection

  - by Yman

  May I know what is the proper way to keep track of display objects created and hence allow me to remove it efficiently later, for garbage collection. For example: for(i=0; i<100; i++){ var dobj = new myClass(); //a sprite addChild(dobj); } From what i know, flash's garbage collection will only collect the objects without strong references and event listeners attached to it. Since the var dobj is strongly referenced to the new object created, I will have to "nullify" it too, am I correct? Should I create an array to keep track of all the objects created in the loop such as: var objectList:Array = new Array(); for(i=0; i<100; i++) { var dobj = new myClass(); //a sprite addChild(dobj); objectList.push(dobj); } //remove all children for each (var key in objectList) { removeChild(key as myClass); } Does this allow GC to collect it on sweep?

  Read the article

• Flushing writes in buffer of Memory Controller to DDR device

  - by Rohit

  At some point in my code, I need to push the writes in my code all the way to the DIMM or DDR device. My requirement is to ensure the write reaches the row,ban,column of the DDR device on the DIMM. I need to read what I've written to the main memory. I do not want caching to get me the value. Instead after writing I want to fetch this value from main memory(DIMM's). So far I've been using Intel's x86 instruction wbinvd(write back and invalidate cache). However this means the caches and TLB are flushed. Write-back requests go to the main memory. However, there is a reasonable amount of time this data might reside in the write buffer of the Memory Controller( Intel calls it integrated memory controller or IMC). The Memory Controller might take some more time depending on the algorithm that runs in the Memory Controller to handle writes. Is there a way I force all existing or pending writes in the write buffer of the memory controller to the DRAM devices ?? What I am looking for is something more direct and more low-level than wbinvd. If you could point me to right documents or specs that describe this I would be grateful. Generally, the IMC has a several registers which can be written or read from. From looking at the specs for that for the chipset I could not find anything useful. Thanks for taking the time to read this.

  Read the article

• Referencing not-yet-defined variables - Java

  - by user2537337

  Because I'm tired of solving math problems, I decided to try something more engaging with my very rusty (and even without the rust, very basic) Java skills. I landed on a super-simple people simulator, and thus far have been having a grand time working through the various steps of getting it to function. Currently, it generates an array of people-class objects and runs a for loop to cycle through a set of actions that alter the relationships between them, which I have stored in a 2d integer array. When it ends, I go look at how much they all hate each other. Fun stuff. Trouble has arisen, however, because I would like the program to clearly print what action is happening when it happens. I thought the best way to do this would be to add a string, description, to my "action" class (which stores variables for the actor, reactor, and the amount the relationship changes). This works to a degree, in that I can print a generic message ("A fight has occurred!") with no problem. However, ideally I would like it to be a little more specific ("Person A has thrown a rock at Person B's head!"). This latter goal is proving more difficult: attempting to construct an action with a description string that references actor and reactor gets me a big old error, "Cannot reference field before it is defined." Which makes perfect sense. I believe I'm not quite in programmer mode, because the only other way I can think to do this is an unwieldy switch statement that negates the need for each action to have its own nicely-packaged description. And there must be a neater way. I am not looking for examples of code, only a push in the direction of the right concept to handle this.

  Read the article

• beforeClose not working in jGrowl?

  - by sparkymark75

  I have the following code which pulls json data from an ASP.NET page and displays these as notifications. The code will also take a note of what's been pulled through and store it in an array to prevent it being shown again in the same session. I'm now trying to implement functionality so that when the user closes a message, it's ID is recorded in a cookie to prevent it ever being shown again. To do this, I'm trying to write to the cookie when the beforeClose event fires. Everything else works fine apart from the saving to a cookie bit. Is there something wrong with my code that I'm missing? var alreadyGrowled = new Array(); var noteCookie = $.cookie("notificationsViewed"); if (noteCookie != null) { alreadyGrowled = noteCookie.split(","); } function growlCheckNew() { $.getJSON('getNotifications.aspx', function(data) { $(data).each(function(entryIndex, entry) { var newMessage = true; $(alreadyGrowled).each(function(index, msg_id) { if (entry['ID'] == msg_id) { newMessage = false; } }); if (newMessage == true) { $.jGrowl(entry['Message'], { sticky: true, header: entry['Title'], beforeClose: function(e, m) { $.cookie("notificationsViewed", entry['ID']); } }); } alreadyGrowled.push(entry['ID']); }); }); }

  Read the article

• Producer consumer with qualifications

  - by tgguy

  I am new to clojure and am trying to understand how to properly use its concurrency features, so any critique/suggestions is appreciated. So I am trying to write a small test program in clojure that works as follows: there 5 producers and 2 consumers a producer waits for a random time and then pushes a number onto a shared queue. a consumer should pull a number off the queue as soon as the queue is nonempty and then sleep for a short time to simulate doing work the consumers should block when the queue is empty producers should block when the queue has more than 4 items in it to prevent it from growing huge Here is my plan for each step above: the producers and consumers will be agents that don't really care for their state (just nil values or something); i just use the agents to send-off a "consumer" or "producer" function to do at some time. Then the shared queue will be (def queue (ref [])). Perhaps this should be an atom though? in the "producer" agent function, simply (Thread/sleep (rand-int 1000)) and then (dosync (alter queue conj (rand-int 100))) to push onto the queue. I am thinking to make the consumer agents watch the queue for changes with add-watcher. Not sure about this though..it will wake up the consumers on any change, even if the change came from a consumer pulling something off (possibly making it empty) . Perhaps checking for this in the watcher function is sufficient. Another problem I see is that if all consumers are busy, then what happens when a producer adds something new to the queue? Does the watched event get queued up on some consumer agent or does it disappear? see above I really don't know how to do this. I heard that clojure's seque may be useful, but I couldn't find enough doc on how to use it and my initial testing didn't seem to work (sorry don't have the code on me anymore)

  Read the article

• git rebase onto remote updates

  - by Blake Chambers

  I work with a small team that uses git for source cod management. Recently, we have been doing topic branches to keep track of features then merging them into master locally then pushing them to a central git repository on a remote server. This works great when no changes have been made in master: I create my topic branch, commit it, merge it into master, then push. Hooray. However, if someone has pushed to origin before i do, my commits are not fast-forward. Thus a merge commit ensues. This also happens when a topic branch needs to merge with master locally to ensure my changes work with the code as of now. So, we end up with merge commits everywhere and a git log rivaling a friendship bracelet. So, rebasing is the obvious choice. What I would like is to: create topic branches holding several commits checkout master and pull (fast-forward because i haven't committed to master) rebase topic branches onto the new head of master rebase topics against master(so the topics start at masters head), bringing master up to my topic head My way of doing this currently is listed below: git checkout master git rebase master topic_1 git rebase topic_1 topic_2 git checkout master git rebase topic_2 git branch -d topic_1 topic_2 Is there a faster way to do this?

  Read the article

• How to move from custom to transluscent NavigationBar and back? Display problems!

  - by jd291

  So, i got this Navigation-based App (with a custom NavigationBar - Category) and I have 2 problems here... @implementation UINavigationBar (Custom) - (void)drawRect:(CGRect)rect { UIImage *image = [UIImage imageNamed: @"bg_toolbar.png"]; [image drawInRect:CGRectMake(0, 0, self.frame.size.width, self.frame.size.height)]; } @end Because of the Navigation-based App, most of the views have a height of 436px (= ScreenSize - NavigationBar height, as you probably know ;). I got one view similar to the photo app overview showing all the thumbnails, from there I push a viewcontroller containing the scroll view (like in photos app) on the stack, like so - (void)buttonPressed:(id)sender { UIButton *btn = (UIButton *)sender; PhotoSetScrollViewController *psc = [[PhotoSetScrollViewController alloc] initWithPhotoArray:photos andID:btn.tag]; [self.navigationController pushViewController:psc animated:YES]; } Problem 1: The view holding the fullscreen scrollview has a height of 480px which seems to be a problem because when poping the viewcontroller by hitting the back button, the view containing the thumbnails (height 436px) moves upward below the navigation bar. And also the Toolbar keeps showing. What could be the problem? Problem 2: How could I switch between my custom navigation bar and the standard black translucent style?

  Read the article

• MMS2R and Multiple Images Rails

  - by Maletor

  Here's my code: require 'mms2r' class IncomingMailHandler < ActionMailer::Base ## # Receives email(s) from MMS-Email or regular email and # uploads that content the user's photos. # TODO: Use beanstalkd for background queueing and processing. def receive(email) begin mms = MMS2R::Media.new(email) ## # Ok to find user by email as long as activate upon registration. # Remember to make UI option that users can opt out of registration # and either not send emails or send them to a [email protected] # type address. ## # Remember to get SpamAssasin if (@user = User.find_by_email(email.from) && email.has_attachments?) mms.media.each do |key, value| if key.include?('image') value.each do |file| @user.photos.push Photo.create!(:uploaded_data => File.open(file), :title => email.subject.empty? ? "Untitled" : email.subject) end end end end ensure mms.purge end end end and here's my error: /usr/local/lib/ruby/gems/1.8/gems/rails-2.3.4/lib/commands/runner.rb:48: undefined method photos' for true:TrueClass (NoMethodError) from /usr/home/xxx/app/models/incoming_mail_handler.rb:23:in each' from /usr/home/xxx/app/models/incoming_mail_handler.rb:23:in receive' from /usr/home/xxx/app/models/incoming_mail_handler.rb:21:in each' from /usr/home/xxx/app/models/incoming_mail_handler.rb:21:in receive' from /usr/local/lib/ruby/gems/1.8/gems/actionmailer-2.3.4/lib/action_mailer/base.rb:419:in receive' from (eval):1 from /usr/local/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in eval' from /usr/local/lib/ruby/gems/1.8/gems/rails-2.3.4/lib/commands/runner.rb:48 from /usr/local/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in gem_original_require' from /usr/local/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from /home/xxx/script/runner:3 I sent an email to the server with two image attachments. Upon receiving the email the server runs "| ruby /xxx/script/runner 'IncomingMailHandler.receive STDIN.read'" What is going on? What am I doing wrong? MMS2R docs are here: http://mms2r.rubyforge.org/mms2r/

  Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >