Search Results

Search found 4909 results on 197 pages for 'vendor lock in'.

Page 124/197 | < Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >

  • Ubuntu and racadm

    - by lmqcn
    I recently purchased a used poweredge 1850 server and it came with a DRAC card. After wiping the HDD and installing ubuntu server 12.04.3 LTS amd64 on it, I am now trying to gain access to the DRAC which I believe is version 4. I have properly configured the DRAC to use it's own IP on my LAN and when I point my browser to the IP address, I am greeted with the DRAC login page (it has the dell logo and everything). However, after trying the credentials of root/calvin, I was denied access. So I think that the previous owners had set their own password. After doing some reading, it appears that I can reset the credentials to the default using racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 1 newpassword but upon entering the command, I get this error: bash: /usr/sbin/racadm: No such file or directory This holds true even if I run sudo su prior to running the racadm command. If, however, I run sudo racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i 1 newpassword there are no errors. Yet, when I try to log into the DRAC via the web interface using the credentials of root/newpassword I am still not granted access. I installed the dell utilities via the guide at https://wiki.ubuntu.com/HardwareSupportMachinesServersDellNotes. I first tried to install the 64 bit version that is on the dell repositories, but after that was unsuccessful, I just followed the guide verbatim. No errors were produced in either case. I even followed the information at the bottom of the guide by executing sudo pppd /dev/ttyS1 1382400 crtscts noipdefault noauth lock persist connect 'chat -v "" CLIENT CLIENTSERVER "\\c"' but obviously, replacing the /dev/ttyS1 with the correct information for my system. ls -l /usr/sbin/ | grep racadm yields -rwxr-xr-x 1 root root 87930 Sep 16 04:03 racadm I have tried these credentials after each attempt of changing the password: root/calvin root/newpassword admin/calvin admin/newpassword All have been unsuccessful. What is the next course of action that I should take?

    Read the article

  • Lenovo S110 netbook screen resolution Ubuntu

    - by Neigyl R. Noval
    I am still stuck with 800x600 resolution. Here is the output of lspci: 00:00.0 Host bridge: Intel Corporation Device 0bf2 (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Device 0be2 (rev 09) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 02:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01) Also, I tried modifying /usr/lib/X11/xorg.conf.d/10-monitor.conf to fix this problem, but still does not work: Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Screen" Identifier "Screen0" Monitor "Monitor0" Device "Card0" SubSection "Display" Viewport 0 0 Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" EndSubSection EndSection Section "Device" Identifier "Card0" Driver "vesa" VendorName "Intel Corporation Device" EndSection I'm using Gnome. System Preference Monitor screen resolution sticks to 800x600. What am I going to do?

    Read the article

  • How do I Series: Connecting an Expression Blend Project to Team Foundation Server

    - by Enrique Lima
    I have heard of people wanting and needing to add projects created in Expression Blend to Team Foundation Server. Here is the recipe: 1) Create your project in Expression Blend … click OK 2) Select the option to open your recently created project in Visual Studio. Once that option is selected, your solution will open up in Visual Studio, close Expression Blend at this point. Now, I want to add this project to Source Control … Next, I connect to my TFS environment, and pick the location to save my project Once the project is added, I will get a status window of pending changes for my project, all that we are left to do is to check in those changes. Since we have checked in our project, we can now close Visual Studio, and we will proceed to open Expression Blend again. And select our project we will! We notice some differences from before, just by opening it What differences you say?!? Notice the lock to the right of the item name … And we also get this when we right click … And there we have it, it is a combination of tools to achieve this, but it is well worth it.

    Read the article

  • DVD RW+ Not showing up

    - by Manywa R.
    I'm running Ubuntu 12.10 on a Toshiba Satellite Pro A120 and my built in DVD Drive is not opening any cd/dvd/dvd rw that am trying to play on them. the drive seems to be mounted and recongnized: Output of sudo lshw: ... *-cdrom description: DVD-RAM writer product: DVD-RAM UJ-841S vendor: MATSHITA physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.40 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=ready *-medium physical id: 0 logical name: /dev/cdrom and the disk seems to start but hang with the dvd drive LED solid amber.... the output of jun@jun-Satellite-Pro-A120:~$ dmesg | grep "sr0" [679396.184901] sr 1:0:0:0: [sr0] Unhandled sense code [679396.184910] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [679396.184920] sr 1:0:0:0: [sr0] Sense Key : Hardware Error [current] [679396.184931] sr 1:0:0:0: [sr0] Add. Sense: Id CRC or ECC error [679396.184942] sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [679396.184965] end_request: I/O error, dev sr0, sector 0 [679396.184975] Buffer I/O error on device sr0, logical block 0 [679396.184984] Buffer I/O error on device sr0, logical block 1 [679396.184990] Buffer I/O error on device sr0, logical block 2 [679396.184996] Buffer I/O error on device sr0, logical block 3 [679396.185002] Buffer I/O error on device sr0, logical block 4 [679396.185008] Buffer I/O error on device sr0, logical block 5 [679396.185014] Buffer I/O error on device sr0, logical block 6 [679396.185020] Buffer I/O error on device sr0, logical block 7 [679396.185031] Buffer I/O error on device sr0, logical block 8 [679396.185038] Buffer I/O error on device sr0, logical block 9 [679396.185070] sr 1:0:0:0: [sr0] unaligned transfer [679396.185108] sr 1:0:0:0: [sr0] unaligned transfer Can someone help me through this? tired of moving around with an external dvd drive. Thanks

    Read the article

  • how do I make my Dualshock 3 gamepad work in Ubuntu 14.04?

    - by user290527
    When my desktop computer was running Ubuntu 12.04, my PS3 controllers would work with USB. I didn't need to do any special setup. I could just plug it in before I start SuperTuxKart and it would recognize it. I can also do this on my laptop (still running 12.04). Since I gave my desktop a fresh install of Ubuntu 14.04, the controller would never work. I have played with some installed software that I found when looking for information. Here is what I get with xboxdrv: liam@Liam-CustomDesktop:~$ sudo xboxdrv --detach-kernel-driver xboxdrv 0.8.5 - http://pingus.seul.org/~grumbel/xboxdrv/ Copyright © 2008-2011 Ingo Ruhnke <[email protected]> Licensed under GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This program comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details. Controller: PLAYSTATION(R)3 Controller Vendor/Product: 054c:0268 USB Path: 003:012 Controller Type: Playstation 3 USB Your Xbox/Xbox360 controller should now be available as: /dev/input/js0 /dev/input/event16 Press Ctrl-c to quit, use '--silent' to suppress the event output So the existence of this controller is acknowledged at on my computer. But it never works for input. In my old installation, I didn't even need to get software like xboxdrv for it to work. I have never tried bluetooth on either computer, but I don't think I even have that on my desktop. So now, how do I make my gamepad work in Ubuntu 14.04?

    Read the article

  • Xna Equivalent of Viewport.Unproject in a draw call as a matrix transformation

    - by Nick Crowther
    I am making a 2D sidescroller and I would like to draw my sprite to world space instead of client space so I do not have to lock it to the center of the screen and when the camera stops the sprite will walk off screen instead of being stuck at the center. In order to do this I wanted to make a transformation matrix that goes in my draw call. I have seen something like this: http://stackoverflow.com/questions/3570192/xna-viewport-projection-and-spritebatch I have seen Matrix.CreateOrthographic() used to go from Worldspace to client space but, how would I go about using it to go from clientspace to worldspace? I was going to try putting my returns from the viewport.unproject method I have into a scale matrix such as: blah = Matrix.CreateScale(unproject.X,unproject.Y,0); however, that doesn't seem to work correctly. Here is what I'm calling in my draw method(where X is the coordinate my camera should follow): Vector3 test = screentoworld(X, graphics); var clienttoworld = Matrix.CreateScale(test.X,test.Y, 0); animationPlayer.Draw(theSpriteBatch, new Vector2(X.X,X.Y),false,false,0,Color.White,new Vector2(1,1),clienttoworld); Here is my code in my unproject method: Vector3 screentoworld(Vector2 some, GraphicsDevice graphics): Vector2 Position =(some.X,some.Y); var project = Matrix.CreateOrthographic(5*graphicsdevice.Viewport.Width, graphicsdevice.Viewport.Height, 0, 1); var viewMatrix = Matrix.CreateLookAt( new Vector3(0, 0, -4.3f), new Vector3(X.X,X.Y,0), Vector3.Up); //I have also tried substituting (cam.Position.X,cam.Position.Y,0) in for the (0,0,-4.3f) Vector3 nearSource = new Vector3(Position, 0f); Vector3 nearPoint = graphicsdevice.Viewport.Unproject(nearSource, project, viewMatrix, Matrix.Identity); return nearPoint;

    Read the article

  • Can't Mount Phone, "according to mtab, /dev/sdb1 is already mounted on /"

    - by RPG Master
    My myTouch Slide wasn't mounting, so I decided to open Disk Utility. My phone shows up but when I click "Mount" it gives me this error: Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed Here's my mtab: /dev/sdb1 / ext4 rw,errors=remount-ro,commit=0 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 none /sys sysfs rw,noexec,nosuid,nodev 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 none /dev devtmpfs rw,mode=0755 0 0 none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 none /dev/shm tmpfs rw,nosuid,nodev 0 0 none /var/run tmpfs rw,nosuid,mode=0755 0 0 none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/matthew/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matthew 0 0 /dev/sdg1 /media/Seagate\040GoFlex ext4 rw,nosuid,nodev,uhelper=udisks 0 0 EDIT: Here's my fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3b0db205-2bdb-4c98-a506-6bdd3520d540 none swap sw 0 0

    Read the article

  • Ubuntu 12.04 problem with E160 huawei - can't detect the device nad freezing system

    - by Matt
    i just installed 12.04, plug in E160 and nothing happend - modem doesnt mount. i found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. Modem still is not detected. I've tried to add new conection but system can't see my device in setup dialogue. Also i noticed that when i open eg. terminal and try to type sth, system freeze for a while.. Thx for help!

    Read the article

  • How can I set external monitor as default?

    - by iJeeves
    I have connected an external monitor to my laptop through HDMI. Currently either my Desktop is getting extended to the external monitor (with native resolution) or low resolution on both when I choose "Same Image in both". How can I ensure that the external monitor is used by default and the laptop monitor just blanks. I generated the xorg.conf file by doing: X -configure The following is the content of xorg.conf.new file generated in my user folder. Should I copy this anywhere? Should I edit the contents? Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "record" Load "extmod" Load "dbe" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, : float, : "True"/"False", ### : "String", : " Hz/kHz/MHz", ### : "%" ### [arg]: arg optional #Option "NoAccel" # [] #Option "SWcursor" # [] #Option "ColorKey" # #Option "CacheLines" # #Option "Dac6Bit" # [] #Option "DRI" # [] #Option "NoDDC" # [] #Option "ShowCache" # [] #Option "XvMCSurfaces" # #Option "PageFlip" # [] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • nvidia segfault crashes XServer (12.04 fresh install)

    - by Sébastien GILLES
    I am on a fresh install of 12.04, and my video card is a Quadro FX 570, which appears to be supported (see output of unity_support_test below). But my Xserver crashes randomly and causes my session to just shutdown and bring me back to the logging screen. This happens several times per hour. After checking syslog it that a segfault in the nvidia driver is the cause of the problem: Jun 13 11:14:17 lima kernel: [86569.828982] Xorg[17940]: segfault at ffebeb69 ip b4c8f7aa sp bf8076dc error 4 in nvidia_drv.so[b47a7000+706000] Jun 13 11:14:36 lima gnome-session[18119]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Ressource temporairement non disponible) on X server :3.#012 The funny thing is that as I was reporting this bug, my xserver crashed again (!) and this time I got another error message: Jun 13 11:29:39 lima kernel: [87491.106441] NVRM: Xid (0000:02:00): 6, PE0001 Jun 13 11:29:39 lima gnome-session[26493]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Ressource temporairement non disponible) on X server :4.#012 Any idea as to what can be the problem given that i am on a fresh install with a supported video card ? Sébastien == Output of unity_support_test $ /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: Quadro FX 570/PCIe/SSE2 OpenGL version string: 3.3.0 NVIDIA 295.40 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes

    Read the article

  • /tmp shows 690 Mb full, actual size 72 K, Why?

    - by Ankit
    Why is /tmp diretory on my system showing 690 Mb full, whereas du -sh /tmp shows only 72K full. drwxrwxrwt 2 lightdm lightdm 4096 Aug 29 21:49 at-spi2 drwx------ 2 ankit ankit 4096 Aug 29 21:50 keyring-0JTfoY drwx------ 2 ankit ankit 4096 Aug 29 21:44 keyring-rChLLL drwx------ 2 root root 16384 Jul 22 02:10 lost+found drwx------ 2 ankit ankit 4096 Jan 1 1970 orbit-ankit drwx------ 2 lightdm lightdm 4096 Aug 29 21:50 pulse-2L9K88eMlGn7 drwx------ 2 root root 4096 Aug 29 21:44 pulse-PKdhtXMmr18n drwx------ 2 ankit ankit 4096 Aug 29 21:50 pulse-zR1TZUAZfmQW drwx------ 2 ankit ankit 4096 Aug 29 21:44 ssh-dlslOXOq2203 drwx------ 2 ankit ankit 4096 Aug 29 21:50 ssh-MrQQVRyy3316 -rw------- 1 ankit ankit 0 Aug 29 21:45 tmp0qnNG4 -rw------- 1 ankit ankit 0 Aug 29 21:50 tmpVvSMt6 -rw------- 1 ankit ankit 0 Aug 29 21:49 tmpy9Gadz -rw-rw-r-- 1 lightdm lightdm 0 Aug 29 21:44 unity_support_test.0 ankit@duster:/tmp$ df -h df: `/home/ankit/.gvfs': Transport endpoint is not connected Filesystem Size Used Avail Use% Mounted on /dev/sda1 79G 11G 65G 14% / udev 2.9G 4.0K 2.9G 1% /dev tmpfs 1.2G 868K 1.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.9G 220K 2.9G 1% /run/shm /dev/sda7 38G 690M 35G 2% /tmp /dev/sda5 93G 26G 63G 30% /home /dev/sda6 93G 1.6G 87G 2% /boot /dev/sda3 154G 69G 78G 48% /home/mount_150 ankit@duster:/tmp$ ankit@duster:/tmp$ ankit@duster:/tmp$ sudo du -sh /tmp/ 72K

    Read the article

  • double screen in ubuntu 12.04?

    - by johan
    I am using ubuntu 12.04 and my video card is ATI Radeon 5000. I cannot use double screen (extended version). I get this error The selected configuration for displays could not be applied requested position/size for CRTC 148 is outside the allowed limit: position=(1280, 0), size=(1280, 768), maximum=(1440, 1440) I tried all display settings but it does not work. Some outputs from the system settings: root@ubuntu:~# lshw -C display *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff root@ubuntu:~# aticonfig --initial Uninitialised file found, configuring. Using /etc/X11/xorg.conf Saving back-up to /etc/X11/xorg.conf.original-0 root@ubuntu:~# cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I would appreciate any suggestions how to solve the problem. Thank you

    Read the article

  • How can I install Celtx 2.9.7 properly on Ubuntu 12.04 LTS?

    - by cruxfilm
    I am new to Ubuntu and Linux and I want to install and use the newest version of the screenwriting software Celtx on Ubuntu 12.04 LTS. After trying https://answers.launchpad.net/ubuntu/+source/ubiquity/+question/206295 and using sudo add-apt-repository ppa:dreamstudio/video sudo apt-get update sudo apt-get install celtx I unfortunately had to find out that was a rather old version with a fairly screwed up UI. I then downloaded the newest version from http://download.celtx.com/2.9.7/Celtx-2.9.7-64.tar.bz2 but now I don't know how to properly install it. I extracted it to /home/username/ (there was no ~/bin/) as described here and I can now launch the application by running the file celtx within that folder (I get asked whether I want to Display, run or run it in Terminal) and it works fine. But I can't get it to launch from Unity. I tried right-clicking the launcher button and going "Lock to Launcher" while it's running and it does create an icon but clicking it to launch the program does nothing. Also searching for celtx in the Dash doesn't find the app. And advice on how to properly install Celtx 2.9.7 in Ubuntu 12.04 LTS?

    Read the article

  • Google Chrome not rendering webpages correctly

    - by sumit_gt
    I am facing some serious web page rendering issues with Chrome. It is more prominent during javascript based animations and stuff on websites like youtube. I have tried removing chrome using (sudo apt-get purge google-chrome-stable) and then reinstalling it. But the problems still persist. The same webpages work correctly on firefox on ubuntu and chrome on windows. The problem only shows up when I use chrome on ubuntu. I think the issue has started after I updated to the latest version of Chrome. I have used Chrome previously on this machine without any problems. I have attached a image that demonstrates the issue. What could possibly be the problem? PS: here's the output of lshw -c video: *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff Here's the output of lspci -nn: output of lspci -nn

    Read the article

  • Failed to spawn test

    - by Lost
    Running a simple test in Ubuntu 12.04: sudo lxc-execute -n test /bin/bash -l debug -o outout Got error message: lxc-execute: failed to spawn 'test' cat outout: lxc-execute 1347053658.113 DEBUG lxc_start - sigchild handler set lxc-execute 1347053658.113 INFO lxc_start - 'test' is initialized lxc-execute 1347053658.366 DEBUG lxc_start - Dropping cap_sys_boot and watching utmp lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/' (rootfs) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/sys' (sysfs) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/proc' (proc) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/dev' (devtmpfs) lxc-execute 1347053658.366 DEBUG lxc_cgroup - checking '/dev/pts' (devpts) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run' (tmpfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/' (ext3) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/sys/fs/fuse/connections' (fusectl) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/sys/kernel/debug' (debugfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/sys/kernel/security' (securityfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run/lock' (tmpfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run/shm' (tmpfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/run/rpc_pipefs' (rpc_pipefs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/scratch/WAMC-Simulation' (nfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/share' (nfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/proj/WAMC-Simulation' (nfs) lxc-execute 1347053658.367 DEBUG lxc_cgroup - checking '/users/bhu' (nfs) lxc-execute 1347053658.367 ERROR lxc_start - failed to spawn 'test' Run command: sudo lxc-checkconfig Kernel config /proc/config.gz not found, looking in other places... Found kernel config file /boot/config-2.6.38.7-1.0emulab --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: enabled Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: enabled Note : Before booting a new kernel, you can check its configuration usage : CONFIG=/path/to/config /usr/bin/lxc-checkconfig What's the problem? Thanks a lot

    Read the article

  • Best ways to collect location-based user input

    - by user359650
    I'm working on a website where users will be able to register and provide information about their location. In order to prevent users from inputting incorrect data, we don't want users to provide free-text information but instead choose from predefined values as much as possible. We believe there are 2 ways of providing those values: use an API to an external service provider or create your own local database. APIs Some resources: - https://developers.facebook.com/docs/reference/ads-api/get-autocomplete-data/ - http://developer.yahoo.com/geo/geoplanet/ Pros: -accuracy and completeness of data. -no maintenance related to update of data as this it taken care of by API provider. -easier/faster to get started (no need to create local database, just implement API). Cons: -degradation of performance when availability issues with external API. -outage due to changes to the external API (until your code is updated to reflect those changes). -lock-in with external provider. Local database Some resources: - http://developer.yahoo.com/geo/geoplanet/data/ - http://www.maxmind.com/app/geolitecity - http://download.geonames.org/export/dump/ Pros: -no external dependency: improved stability and performance. Cons: -more work to get started (you need to create the database and code to interact with it). -risks of inaccurate/incomplete data, either initially or over time. -more maintenance work to keep database up to date. Assuming the depth information requested from users is as follows: -country: interested in value. also used to narrow down list of regions. -region (state in the US, county in the UK...): not interested in value itself, only used to narrow down list of cities. -city: interested in value (which can be used to work out related region should we need regional statistics). -address: interested in value although OPTIONAL. Which option (whether API or local database) would you choose? What tips you would give for the implementation? What other resources can you share?

    Read the article

  • Updating Ubuntu server from 8.10 to 10.04

    - by Ward
    I have a VPS that has Ubuntu 8.10 Server Edition installed on it and I would like to upgrade it to 10.04. What would be the correct way of doing this? I only have ssh access to it and a "Start/Shutdown VPS" in the client panel of the vendor. In other words, I do not have physical access to it. Also worth noting is that I apparently cannot install programs any more since the sources (osuosl.org ?) are not online. Not the ones this server has set anyway. # apt-get update Ign http://ubuntu.osuosl.org intrepid Release.gpg Ign http://ubuntu.osuosl.org intrepid/main Translation-en_US Ign http://ubuntu.osuosl.org intrepid/universe Translation-en_US Ign http://ubuntu.osuosl.org intrepid Release Ign http://ubuntu.osuosl.org intrepid/main Packages Ign http://ubuntu.osuosl.org intrepid/universe Packages Err http://ubuntu.osuosl.org intrepid/main Packages 404 Not Found Err http://ubuntu.osuosl.org intrepid/universe Packages 404 Not Found W: Failed to fetch http://ubuntu.osuosl.org/ubuntu/dists/intrepid/main/binary-amd64/Packages.gz 404 Not Found W: Failed to fetch http://ubuntu.osuosl.org/ubuntu/dists/intrepid/universe/binary-amd64/Packages.gz 404 Not Found E: Some index files failed to download, they have been ignored, or old ones used instead.

    Read the article

  • PeopleSoft RECONNECT Conference Unites the PeopleSoft Community

    - by Marc Weintraub
    The PeopleSoft team is looking forward to participating in this new PeopleSoft deep dive conference from the Quest International Users Group.  We’ve worked diligently with the leadership of Quest’s PeopleSoft Special Interest Groups (SIG’s) and Regional User Groups (RUG’s) to make sure this national user event delivers PeopleSoft content that meets the needs of the PeopleSoft community. The inaugural PeopleSoft RECONNECT conference will be held August 27-29, 2012 in Hartford Connecticut.  Through our Product Strategy, Development and Support teams Oracle will provide support for education sessions in these key tracks: Human Capital Management (HCM) Financials (FMS) Supplier Relationship Management (SRM) Supply Chain, Manufacturing & Distribution (SCM) Project Costing Applications Technology (PeopleTools) Oracle will host a general session from John Webb, plus roadmap sessions for the major PeopleSoft product areas.  We will also host enhancement discussions for our key PeopleSoft solutions allowing participants to contribute to the future of PeopleSoft through an interactive forum.  All of this is part of the 100+ education sessions being offered by the customer and vendor community.   There’s a lot of buzz around this conference, so don’t delay in registering key members of your team today.  We look forward to seeing you there so register NOW!

    Read the article

  • Why is the root partition on my disk full?

    - by Agmenor
    I installed Ubuntu 12.04 by doing a fresh install where there was previously Ubuntu 11.10. My computer warns me now that my disk is nearly full. After having run apt-get purge, run apt-get autoremove and emptied the Trash can, I still have this problem as shown by this screenshot of Gparted: The disk /dev/sda7 is indeed full. I ran the Disk Usage Analyzer (Baobab) and I am still not sure of what is happening: One of my hypothesis is that when installing Ubuntu 12.04, I didn't configure my disks well and the disk /dev/sda6 is not mounted well as /home. Is this the reason indeed? What should I do to verify this and then to get the things fixed? Here are a few additional details to answer the questions I received (thank you everybody): My home directory is not encrypted. The Backup utility (Déjà Dup) is not set for automatic backups. (I do it myself and manually.) After I mount /dev/sda6, the command df -h gives Filesystem Size Used Avail Use% Mounted on /dev/sda7 244G 221G 12G 96% / udev 3,9G 4,0K 3,9G 1% /dev tmpfs 1,6G 904K 1,6G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,9G 164K 3,9G 1% /run/shm /dev/sda6 653G 189G 433G 31% /media/8ec2fa69-039b-4c52-ab1b-034d785132a1 (sorry but formatting this into code does not work, for an unknown reason) Thanks to izx's post, I realized /dev/sda6 was not even mounted before. It contains all the documents I used to have when I was running Ubuntu 11.10.

    Read the article

  • Using orientation to calculate position on Windows Phone 7

    - by Lavinski
    I'm using the motion API and I'm trying to figure out a control scheme for the game I'm currently developing. What I'm trying to achive is for a orienation of the device to correlate directly to a position. Such that tilting the phone forward and to the left represents the top left position and back to the right would be the bottom right position. Photos to make it clearer (the red dot would be the calculated position). Forward and Left Back and Right Now for the tricky bit. I also have to make sure that the values take into account left landscape and right landscape device orientations (portrait is the default so no calculations would be needed for it). Has anyone done anything like this? Notes: I've tried using the yaw, pitch, roll and Quaternion readings. Sample: // Get device facing vector public static Vector3 GetState() { lock (lockable) { var down = Vector3.Forward; var direction = Vector3.Transform(down, state); switch (Orientation) { case Orientation.LandscapeLeft: return Vector3.TransformNormal(direction, Matrix.CreateRotationZ(-rightAngle)); case Orientation.LandscapeRight: return Vector3.TransformNormal(direction, Matrix.CreateRotationZ(rightAngle)); } return direction; } }

    Read the article

  • Screen problems on 11.10 using VGA compatible controller 2nd Generation Core Processor Family Integrated Graphics Controller

    - by MorrisseyJ
    I am having problems with my display. The problem manifests as lots of screen artefacts, which seem to be worse in Unity than in Gnome 3, are worse after i have used suspend and are intolerable if i set myself up on a dual monitor. Specific issues include: icons disappearing, lines occurring all over the screen, the backgrounds of certain windows going another colour and window borders disappearing or being filled with text from other parts of the screen. The most annoying problem is lines of text disappearing from a host of word processing programmes (libreoffice, gedit, bluefish etc), as i type. In most circumstances the screen problem can be temporarily fixed (so that i can see the screen clearly) by either scrolling the text off the screen and then scrolling it back onto the screen, or highlighting the offending area of the desktop, by clicking and dragging. Errors on parts of the screen that don't seem to redraw (window borders (off the universal menu) or the screen area outside of a LO document, in print layout view, for example) can't seem to be fixed in a session. I am running 11.10, 64 bit on my Thinkpad x121e Display information is: description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:4000(size=64) There appear to be a few problems with the Intel graphics and Ubuntu but i am not sure if they are all the same. If anyone knows if this is a known bug it'd be great to know, otherwise i'll file a report. Should anyone know of a fix i would greatly appreciate hearing about it. Let me know if you need any more information. Thanks

    Read the article

  • Can't update kernel to 2.6.35.27

    - by Uri Herrera
    When I try to update I get this message, I'm guessing I'm missing something here? Filesystem Type Size Used Avail Use% Mounted on /dev/sdb6 ext4 43G 7.7G 33G 20% / none devtmpfs 1.6G 349k 1.6G 1% /dev none tmpfs 1.6G 5.9M 1.6G 1% /dev/shm none tmpfs 1.6G 218k 1.6G 1% /var/run none tmpfs 1.6G 0 1.6G 0% /var/lock /dev/sdb2 fuseblk 258G 198G 60G 77% /media/Backup /dev/sda1 fuseblk 321G 175G 146G 55% /media/Media /dev/sdb1 ext4 96M 84M 6.7M 93% /boot /dev/sdb7 ext4 175G 81G 86G 49% /home Here's the output: Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-image-2.6.35-22-generic 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. 5 not fully installed or removed. After this operation, 107MB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 282211 files and directories currently installed.) Removing linux-image-2.6.35-22-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.35-22-generic /boot/vmlinuz-2.6.35-22-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.35-22-generic /boot/vmlinuz-2.6.35-22-generic /etc/default/grub: 23: Syntax error: newline unexpected run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-2.6.35-22- generic.postrm line 328. dpkg: error processing linux-image-2.6.35-22-generic (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: linux-image-2.6.35-22-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

  • Why does 'top' say my machine is only 50% idle?

    - by Chris Moore
    What's going on here? I'm running nothing on the system, iotop and iftop show the network and hard drive are both idle, and top (sorted by %CPU) shows nothing running. So why is the system only 50% idle? What's the other 50% waiting for? How can I find out? top - 12:01:05 up 3 days, 15:03, 1 user, load average: 6.00, 6.01, 6.05 Tasks: 179 total, 1 running, 178 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.0%sy, 0.0%ni, 49.7%id, 49.7%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2053996k total, 1992600k used, 61396k free, 81680k buffers Swap: 4092924k total, 10740k used, 4082184k free, 1338636k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1042 deb 20 0 21468 1412 1000 R 1 0.1 0:00.03 top 1 root 20 0 24188 1952 1152 S 0 0.1 0:01.44 init 2 root 20 0 0 0 0 S 0 0.0 0:00.05 kthreadd Update: dmesg shows the printer driver misbehaving: [28858.561847] cnijnetprn[1503]: segfault at 29 ip 00007f56cf3480f7 sp 00007fffb964ec30 error 4 in libcnnet.so.1.2.0[7f56cf345000+9000] [68851.187802] cnijnetprn[9180]: segfault at 29 ip 00007ffe7636a0f7 sp 00007fff9a8b1990 error 4 in libcnnet.so.1.2.0[7ffe76367000+9000] [155412.107826] cnijnetprn[19966]: segfault at 29 ip 00007fc31de770f7 sp 00007fffc03aa8e0 error 4 in libcnnet.so.1.2.0[7fc31de74000+9000] and also some issue with cp: [248041.172067] INFO: task cp:27488 blocked for more than 120 seconds. [248041.172071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [248041.172075] cp D ffffffff81805120 0 27488 27345 0x00000004 [248041.172080] ffff880078d57a38 0000000000000046 ffff880078d579d8 ffffffff81032a79 [248041.172085] ffff880078d57fd8 ffff880078d57fd8 ffff880078d57fd8 0000000000012a40 [248041.172090] ffff88007b818000 ffff880069acc560 ffff880078d57a18 ffff88007f8532c0 [248041.172095] Call Trace: [248041.172104] [<ffffffff81032a79>] ? default_spin_lock_flags+0x9/0x10 [248041.172109] [<ffffffff8110a360>] ? __lock_page+0x70/0x70 [248041.172114] [<ffffffff815f0ecf>] schedule+0x3f/0x60 I did try copying something to the USB stick that's plugged into the router and mounted onto this computer using mount.cifs. That almost always causes everything to lock up, so I'm guessing that's the problem. I'll reboot and stop using mount.cifs.

    Read the article

  • Swap drive not operating correctly

    - by Blue Ice
    At first, I started seeing the warning signs. The halting pages. The molasses speed of the windows closing. The pictures not rendering. Then, I took action. Recently I added a swap drive to my computer. For a while, everything was good. Unicorns frolicked among the new bits and bytes resplendent on the shiny metal platter known as my swap drive. Today, I opened Chromium, and got on the 7th tab (start.csail.mit.edu) "He's dead, Jim!". This used to happen before I added my swap drive, but now I thought that it wouldn't happen because I added more memory. I fear for the safety of the unicorns. Please help me make my swap drive work again. As a side note, here is the result of cat /proc/swaps: Filename Type Size Used Priority /dev/sda5 partition 39075836 213896 -1 Result of free: total used free shared buffers cached Mem: 507472 330792 176680 0 6208 71252 -/+ buffers/cache: 253332 254140 Result of df -h: Filesystem Size Used Avail Use% Mounted on /dev/sdb1 147G 8.9G 130G 7% / none 4.0K 0 4.0K 0% /sys/fs/cgroup udev 240M 12K 240M 1% /dev tmpfs 50M 824K 49M 2% /run none 5.0M 0 5.0M 0% /run/lock none 248M 208K 248M 1% /run/shm none 100M 20K 100M 1% /run/user

    Read the article

  • How to get Bus and Device relationship for a /dev/ttyUSB

    - by Ernesto Campohermoso
    I need to write an script for restart USB dongles. I have all tools but I can't link my /dev/ttyUSBx to physical BUS and DEVICE. An issue is that I have three dongles with the same id vendor and id product. If I do lsusb the output is: Bus 001 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 006: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 007: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 002: ID 80ee:0021 Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub And I have attached it to: /dev/ttyUSB0 /dev/ttyUSB3 /dev/ttyUSB5 But I want to know which device is related with which Bus Device. By example I need to get the following: /dev/ttyUSB0 -> Bus 001 Device 006 /dev/ttyUSB3 -> Bus 001 Device 004 /dev/ttyUSB5 -> Bus 001 Device 007 I'm using Ubuntu Server 10.04 and I tested the tools: lsusb hal lsmod But I can't get the relationship.

    Read the article

< Previous Page | 120 121 122 123 124 125 126 127 128 129 130 131  | Next Page >