Search Results

Search found 16971 results on 679 pages for 'blogs'.

Page 126/679 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• Mathematica Programming Language&ndash;An Introduction

  - by JoshReuben

  The Mathematica http://www.wolfram.com/mathematica/ programming model consists of a kernel computation engine (or grid of such engines) and a front-end of notebook instances that communicate with the kernel throughout a session. The programming model of Mathematica is incredibly rich & powerful – besides numeric calculations, it supports symbols (eg Pi, I, E) and control flow logic.   obviously I could use this as a simple calculator: 5 * 10 --> 50 but this language is much more than that!   for example, I could use control flow logic & setup a simple infinite loop: x=1; While [x>0, x=x,x+1] Different brackets have different purposes: square brackets for function arguments:  Cos[x] round brackets for grouping: (1+2)*3 curly brackets for lists: {1,2,3,4} The power of Mathematica (as opposed to say Matlab) is that it gives exact symbolic answers instead of a rounded numeric approximation (unless you request it):   Mathematica lets you define scoped variables (symbols): a=1; b=2; c=a+b --> 5 these variables can contain symbolic values – you can think of these as partially computed functions:   use Clear[x] or Remove[x] to zero or dereference a variable.   To compute a numerical approximation to n significant digits (default n=6), use N[x,n] or the //N prefix: Pi //N -->3.14159 N[Pi,50] --> 3.1415926535897932384626433832795028841971693993751 The kernel uses % to reference the lastcalculation result, %% the 2nd last, %%% the 3rd last etc –> clearer statements: eg instead of: Sqrt[Pi+Sqrt[Sqrt[Pi+Sqrt[Pi]]] do: Sqrt[Pi]; Sqrt[Pi+%]; Sqrt[Pi+%] The help system supports wildcards, so I can search for functions like so: ?Inv* Mathematica supports some very powerful programming constructs and a rich function library that allow you to do things that you would have to write allot of code for in a language like C++.   the Factor function – factorization: Factor[x^3 – 6*x^2 +11x – 6] --> (-3+x) (-2+x) (-1+x)   the Solve function – find the roots of an equation: Solve[x^3 – 2x + 1 == 0] -->   the Expand function – express (1+x)^10 in polynomial form: Expand[(1+x)^10] --> 1+10x+45x^2+120x^3+210x^4+252x^5+210x^6+120x^7+45x^8+10x^9+x^10 the Prime function – what is the 1000th prime? Prime[1000] -->7919 Mathematica also has some powerful graphics capabilities:   the Plot function – plot the graph of y=Sin x in a single period: Plot[Sin[x], {x,0,2*Pi}] you can also plot 3D surfaces of functions using Plot3D function

  Read the article

• Sound vs. Valid Argument

  - by MarkPearl

  Today I spent some time reviewing my Formal Logic course for my up coming exam. I came across a section that I have never really explored in any proper depth… the difference between a valid argument and a sound argument. Here go some notes I made… What is an argument? In this case we are not referring to a verbal fight, but more what we call a set of premise followed by a conclusion. Before we go further we need to understand what a premise is… a premise is a statement that an argument claims will induce or justify a conclusion. Think of a premise as an assumption that something is true. So, an argument can consist of one or more premises and a conclusion… When is an argument valid? An argument can be either valid or invalid. An argument is valid if, and only if, it is impossible for there to be a situation in which all it's premises are TRUE and it's conclusion is FALSE. It is generally easier to determine if an argument is invalid. Do this by applying the following… Assume that all the premises are true, then ask yourself if it is now possible for the conclusion to be false. If the answer is "yes," the argument is invalid. If it's "no," the argument is valid. Example 1… P1 – Mark is Tall P2 – Mark is a boy C –  Mark is a tall boy Walkthrough 1… Assume Mark is Tall is true and also assume that Mark is a boy. Based on these two premises, the conclusion is also true – Mark is a tall boy, thus the it is a valid argument. Let’s make this an invalid argument…   Example 2… P1 – Mark is Tall P2 – Mark is a boy C – Mark is a short boy Walkthrough 2… This would be an invalid argument, since from the premises we assume that Mark is tall and he is a boy, and then the conclusion goes against this by saying that Mark is short. Thus an invalid argument.   When is an argument sound? An argument is said to be sound when it is valid and all the premises are indeed true (not just assumed to be true). Rephrased, an argument is said to be sound when the conclusion will follow from the premises and the premises are indeed true in real life. In example 1 we were referring to a specific person, if we generalized it a bit we could come up with the following example.   Example 3 P1 – All people called Mark are tall P2 – I know a specific person called Mark C – He is a tall person   In this instance, it is a valid argument (we assume the premises are true, which leads to the conclusion being true), but the argument is NOT sound. In the real world there must be at least one person called Mark who is not tall. Something also to note, all invalid arguments are also unsound – this makes sense, if an argument is not valid, how on earth can it be true in the real world.   What happens when the premises contradict themselves? This is an interesting one… An argument is valid if, and only if, it is impossible for there to be a situation in which all it's premises are TRUE and it's conclusion is FALSE. When premises are contradictory, the argument is always valid because it is impossible for all the premises to be true at one time. Lets look at an example.. P1 - Elvis is dead P2 – Elvis is alive C – Laura is a woolly mammoth This is a valid argument, but not a sound one. Think about it. Is it possible to have a situation in which the premises are true and the conclusion is false? Sure, it's possible to have a situation in which the conclusion is false, but for the argument to be invalid, it has to be possible for the premises to all be true at the same time the conclusion is false. So if the premises can't all be true, the argument is valid. (If you still think the argument is invalid, draw a picture in which the premises are all true and the conclusion is false. Remember, there's only one Elvis, and you can't be both dead and alive.) For more info on this I suggest reading the following blog post.

  Read the article

• BDD IS Different to TDD

  - by Liam McLennan

  One of this morning’s sessions at Alt.NET 2010 discussed BDD. Charlie Pool expressed the opinion, which I have heard many times, that BDD is just a description of TDD done properly. For me, the core principles of BDD are: expressing behaviour in terms that show the value to the system actors Expressing behaviours / scenarios in a format that clearly separates the context, the action and the observations. If we go back to Kent Beck’s TDD book neither of these elements are mentioned as being core to TDD. BDD is an evolution of TDD. It is a specialisation of TDD, but it is not the same as TDD. Discussing BDD, and building specialised tools for BDD, is valuable even though the difference between BDD and TDD is subtle. Further, the existence of BDD does not mean that TDD is obsolete or invalidated.

  Read the article

• ADF for German Speakers

  - by shay.shmeltzer

  If you know German and you are using ADF then you'll be interested in the ADF special interest group the guys over at Germany established - The deutschen ADF Community. Details here: http://www.oracle.com/global/de/community/adf/index.html If you are an English speaker - then at least you have the ADF Enterprise Methodology Group - which you should join if you haven't already.

  Read the article

• Iterative Conversion

  - by stuart ramage

  Question Received: I am toying with the idea of migrating the current information first and the remainder of the history at a later date. I have heard that the conversion tool copes with this, but haven't found any information on how it does. Answer: The Toolkit will support iterative conversions as long as the original master data key tables (the CK_* tables) are not cleared down from Staging (the already converted Transactional Data would need to be cleared down) and the Production instance being migrated into is actually Production (we have migrated into a pre-prod instance in the past and then unloaded this and loaded it into the real PROD instance, but this will not work for your situation. You need to be migrating directly into your intended environment). In this case the migration tool will still know all about the original keys and the generated keys for the primary objects (Account, SA, etc.) and as such it will be able to link the data converted as part of a second pass onto these entities. It should be noted that this may result in the original opening balances potentially being displayed with an incorrect value (if we are talking about Financial Transactions) and also that care will have to be taken to ensure that all related objects are aligned (eg. A Bill must have a set to bill segments, meter reads and a financial transactions, and these entities cannot exist independantly). It should also be noted that subsequent runs of the conversion tool would need to be 'trimmed' to ensure that they are only doing work on the objects affected. You would not want to revalidate and migrate all Person, Account, SA, SA/SP, SP and Premise details since this information has already been processed, but you would definitely want to run the affected transactional record validation and keygen processes. There is no real "hard-and-fast" rule around this processing since is it specific to each implmentations needs, but the majority of the effort required should be detailed in the Conversion Tool section of the online help (under Adminstration/ The Conversion Tool). The major rule is to ensure that you only run the steps and validation/keygen steps that you need and do not do a complete rerun for your subsequent conversion.

  Read the article

• Oracle AutoVue Key Highlights from Oracle OpenWorld 2012

  - by Celine Beck

  We closed another successful Oracle Open World for AutoVue. Thanks to everyone who joined us this year. As usual, from customer presentations to evening networking activities, there was enough to keep us busy during the entire event. Here is a summary of some of the key highlights of the conference: Sessions:We had two AutoVue-specific sessions during Oracle Open World this year. The first session was part of the Product Lifecycle Management track and covered how AutoVue can be used to help drive effective decision making and streamline design for manufacturing processes. Attendees had the opportunity to learn from customer speaker GLOBALFOUNDRIES how they have been leveraging Oracle AutoVue within Agile PLM to enable high degree of collaboration during the exceptionally creative phases of their product development processes, securely, without risking valuable intellectual property. If you are interested, you can actually download the presentation by visiting launch.oracle.com/?plmopenworld2012.AutoVue was also featured as part of the Utilities track. This session focused on how visualization solutions play a critical role in effective plant optimization and configuration strategies defined by owners and operators of power generation facilities. Attendees learnt how integrated with document management systems, and enterprise applications like Oracle Primavera and Asset Lifecycle Management, AutoVue improves change management processes; minimizes risks by providing access to accurate engineering drawings which capture and reflect the as-maintained status of assets; and allows customers to drive complex maintenance projects to successful completion.Augmented Business Visualization for Agile PLMDuring Oracle Open World, we also showcased an Augmented Business Visualization-based solution for Oracle Agile PLM. An Augmented Business Visualization (ABV) solution is one where your structured data (from Oracle Agile PLM for instance) and your unstructured data (documents, designs, 3D models, etc) come together to allow you to make better decisions (check out our blog posts on the topic: Augment the Value of Your Data (or Time to replace the “attach” button) and Context is Everything ). As part of the Agile PLM, the idea is to support more effective decision-making by turning 3D assemblies into color-coded reports, and streamlining business processes like Engineering Change Management by enabling the automatic creation of engineering change requests in Agile PLM directly from documents being viewed in AutoVue. More on this coming soon...probably during the Oracle Value Chain Summit to be held in San Francisco, from Feb. 4-6, 2013 in San Francisco! Mark your calendars and stay tuned for more information! And thanks again for joining us at Oracle OpenWorld!

  Read the article

• Getting More Out of UPK

  - by [email protected]

  Are you getting the most out of UPK? Remember the idea of streamlining your content creation efforts? How about the concept of collaboration during development? How are you leveraging the System Process Documents or Test Scripts? Is your training team benefiting from the creation of process documentation? Is UPK linked into the help menu of your application or your even at the browser level (Smart Help)? Many customers underutilize UPK. Some customers just think of UPK as a training creation solution or just for creating documentation. To get the full value of UPK you need to first evaluate how the UPK developer is installed. Single User or Multi User? If you have more than two developers of UPK, then there is a significant benefit from installing UPK in multi user mode. This helps drive collaboration, automatic version control and better facilitation of the workflow and state features with use of customized views for the developers. Has your organization installed Usage Tracking? How are the outputs deployed and for how many applications? If these questions have you thinking about your overall usage of UPK and you see significant improvement by using more of what UPK has to offer, then it could be time for a UPK Health Check. Contact your UPK Sales Consultant to help understand your environment and how to maximize the value of UPK and start getting more out of the product.

  Read the article

• Don’t miss the Oracle Webcast: Enabling Effective Decision Making with “One Source of the Truth” at BB&T

  - by Rob Reynolds

  Webcast Date:  September 17th, 2012  -  9 a.m. PT / 12 p.m. ET  BB&T Corporation (NYSE: BBT) is one of the largest financial services holding companies in the United States. One of their IT goals is to provide “one source of truth” to enable more effective decision making at the corporate and local level. By using Oracle’s Hyperion Enterprise Planning Suite and Oracle Essbase, BB&T streamlined their planning and financial reporting processes. Large volumes of data were consolidated into a single reporting solution giving stakeholders more timely and accurate information. By providing a central and automated collaboration tool, BB&T is able to prepare more accurate financial forecasts, rapidly consolidate large amounts of data, and make more informed decisions. Join us on September 17th for a live webcast to hear BB&T’s journey to achieve “One Source of Truth” and learn how Oracle’s Hyperion Planning Suite and Oracle’s Essbase allows you to: Adopt best practices like rolling forecasts and driver-based planning Reduce the time and effort dedicated to the annual budget process Reduce the time and effort dedicated to the annual budget process Remove forecasting uncertainty with predictive modeling capabilities Rapidly analyze shifting market conditions with a powerful calculation engine Prioritize resources effectively with complete visibility into all potential risks Link strategy and execution with integrated strategic, financial and operational planning Register here.

  Read the article

• links for 2010-04-01

  - by Bob Rhubart

  Jason Williamson: Oracle Releases New Mainframe Re-Hosting in Oracle Tuxedo 11g Jason Williamson's update on new features in the latest release of Oracle Tuxedo 11g. (tags: otn oracle entarch) Jeanne Waldman: Using Oracle ADF Data Visualization Tools (DVT) Line Graphs to Display Weather Information Jeanne Waldman illustrates the nuts and bolts of modifications she made to a a simple JDeveloper Fusion application that retrieves weather data. I have a simple JDeveloper Fusion application that retrieves weather data. (tags: oracle otn virtualization jdeveloper ADF) Brian Harrison: Oracle WebCenter Interaction - New Release Overivew, Part 2 Brian Harrison continue his discussion of the next release of Oracle WebCenter Interaction with a look at at a few other new features. (tags: oracle otn enterprise2.0 webcenter)

  Read the article

• The Missing Post

  - by Joe Mayo

  It’s somewhat of a mystery how the writing process can conjure up results that weren’t initially intended. Case in point is the fact that another post was planned to be in place of this one, but it never made the light of day.  This particular post started off as an introduction to a technology I had just learned, used, and wanted to share the experience with others.  The beginning was fun and demonstrated how easy it was to get started.  One of the things I’ve been pondering over time is that the Web is filled with introductions to new technologies and quick first looks, so I set out to add more depth, share lessons learned, and generally help you avoid the problems I encountered along the way; problems being a key theme of why you aren’t reading that post at this very minute.  Problems that curiously came from nowhere to thwart my good intentions. Success was sweet when using the tool for the prototypical demo scenario. The thing is, I intended the tool to accomplish a real task.  Having embarked on the path toward getting the job done, glitches began creeping into the process.  Realizing that this was all a bit new, I had patience and found a suitable work-around, but this was to be short lived. As in marching ants to a freshly laid out picnic, the problems kept coming until I had to get up and walk away.  Not to be outdone, sheer will and brute force manual intervention led to mission accomplishment.  Though I kept a positive outlook and was pleased at the final result, the process of using the tool had somewhat soured. Regardless of a less than stellar experience with the tool, I have a great deal of respect for the company that produced it and the people who built it. Perhaps I empathize for what they might feel after reading a post that details such deficiencies in their product.  Sure, if you’re in this business, you’ve got to have a thick skin; brush it off, fix the problem, and move on to greatness. But, today I feel like they’re people and are probably already aware of any issues I would seemingly reveal.  Anyone who builds a product or provides a service takes a lot of pride in what they do.  Sometimes they screw up and if their worth a dime, they make it up. I think that will happen in this case and there’s no reason why I should post information that has the potential to sound more negative than helpful.  While no one would ever notice or care either way, I’m posting something that won’t harm. Joe

  Read the article

• What Error Messages Reveal

  - by ultan o'broin

  I love this blog entry Usability doesn't mean UI Especially the part: Ask for a list of all error messages when you do your next vendor evaluation. You will learn more about the vendor's commitment to usability and product quality than you will fathom from a slick demo. Not so sure about the part about error messages not being "hip" or "glamorous" though. I know... I should get out more...:)

  Read the article

• OFM 11g: Implementing OAM SSO with Forms

  - by olaf.heimburger

  There is some confusion about the integration of OFM 11g Forms with Oracle Access Manager 11g (OAM). Some say this does not work, some say it works, but.... Actually, having implemented it many times I belong to the later group. Here is how. Caveat Before you start installing anything, take a step back and consider your current implementation and what you really need and want to achieve. The current integration of Forms 11g with OAM 11g does not support self-service account creation and password resets from the Forms application. If you really need this, you must use the existing Oracle AS 10.1.4.3 infrastructure. On the other hand, if your user population is pretty stable, you can enjoy the latest Forms 11g with OAM 11g. Assumptions The whole process should be done in one day. I assume that all domains and instances are started during setup, if you need to restart them on demand or purpose, be sure to have proper start/stop scripts, I don't mention them. Preparation It goes without saying, that you always should do a proper backup before you change anything on your production environment. With proper backup, I also mean a tested and verified restore process. If you dared to test it before, do it now. It pays off. Requirements For OAM 11g to work properly you need a LDAP repository. For the integration of Forms 11g you need an Oracle Internet Directory (OID) configured with the Oracle AS SSO LDAP extensions. For better support I usually give the latest version a try, in this case OID 11g is a good choice.During the Installation and Integration steps we use an upgrade wizard that needs the old OID configuration on the same host but in a different ORACLE_HOME. Installation vs Configuration With OFM 11g Oracle introduced a clear separation between Installation of the binaries (the software) and the Configuration of the instances (the runtime). This is really great as you can install all the software and create new instances when needed. In the following we adhere to this scheme and install the software first and then configure the instances later. Installation Steps The Oracle documentation contains all the necessary steps for the installation of all pieces of software. But some hints help to avoid traps and pitfalls. Step 1 The Database Start the installation with the database. It is quite obvious but we need an Oracle database for all the other steps. If you have one at hand, fine. If not, just install at least a Oracle 10.2.0.4 version. This database can be on a different host. Step 2 The Repository Creation Utility The next step should be to run the Repository Creation Utility (RCU). This is a client application that just needs to connect to your database. It can be run on any host that can reach the database and is a Windows or Linux 32-bit machine. When you run it, be sure to install the OID schema and the OAM schema. If you miss one of these, you can run the RCU again to install the missing schema. Step 3 The Foundation With OFM 11g Oracle started to use WebLogic Server 11g (WLS) as its foundation for all OFM 11g installation. We therefore install it first. Depending on your operating system, it might be possible, that no native installer is available. My approach to this dilemma is to use the WLS Generic Installer for all my installations. It does not include a JDK either but if you have both for your platform you are ready to go. Step 3a The JDK To make things interesting, Oracle currently has two JDKs in its portfolio. The Sun JDK and the JRockit JDK. Both are available for a number of platforms. If you are lucky and both are available for your platform, install both in a separate directory (and not one of your ORACLE_HOMEs) each, You can use the later as you like. Step 3b Install WLS for OID and OAM With the JDK installed, we start the generic installer with java -jar wls_generic.jar.STOP! Before you do this, check the version first. It should be 1.6.0_18 or later and not the GCC one (Some Linux distros have it installed by default). To verify the version, issue a java -version command and make sure that the output does not contain the text gcj and the version matches. If this does not work, use an absolute path like /opt/java/jdk1.6.0_23/bin/java to start the installer. The installer allows you to specify a path to install the software into, say /opt/oracle/iam/11.1.1.3 for the OID and OAM installation. We will call this IAM_HOME. Step 4 Install OID Now we are ready to install OID. Start the OID installer (in the Disk1 directory) and just select the installation only step. This will install the software only and does not configure the instance. Use the IAM_HOME as the target directory. Step 5 Install SOA Suite The IAM 11g Suite uses the BPEL component of the SOA Suite 11g for its workflows. This is a pretty closed environment and not to be used for SCA Composites. We install the SOA Suite in $IAM_HOME/soa. The installer only installs the binaries. Configuration will be done later. Step 6 Install OAM Once the installation of OID and SOA is done, we are ready to install the OAM software in the same IAM_HOME. Make sure to install the OAM binaries in a directory different from the one you used during the OID and SOA installation. As before, we only install the software, the instance will be created later. Step 7 Backup the Installation At this point, I normally do a backup (or snapshot in a virtual image) of the installation. Good when you need to go back to this point. Step 8 Configure OID The software is installed and now we need instances to run it. This process is called configuration. For OID use the config.sh found in $IAM_HOME/oid/bin to start the configuration wizard. Normally this runs smoothly. If you encounter some issues check the Oracle Support site for help. This configuration will also start the OID instance. Step 9 Install the Oracle AS SSO Schema Before we install the Forms software we need to install the Oracle AS SSO Schema into the database and OID. This is a rather dangerous procedure, but fully documented in the IAM Installation Guide, Chapter 10. You should finish this in one go, do not reboot your host during the whole procedure. As a precaution, you should make a backup of the OID instance before you start the procedure. Once the backup is ready, read the chapter, including every note, carefully. You can avoid a number of issues by following all the steps and will succeed with a working solution. Step 10 Configure OAM Reached this step? Great. You are ready to create an OAM instance. Use the $IAM_HOME/iam/common/binconfig.sh for this. This will open the WLS Domain Creation Wizard and asks for the libraries to be installed. You should at least select the OAM with Database repository item. The configuration will also start the OAM instance. Step 11 Install WLS for Forms 11g It is quite tempting to install everything in one ORACLE_HOME. Unfortunately this does not work for all OFM packages. Therefore we do another WLS installation in another ORACLE_HOME. The same considerations as in step 3b apply. We call this one FORMS_HOME. Step 12 Install Forms In the FORMS_HOME we now install the binaries for the Forms 11g software. Again, this is a install only step. Configuration starts with the next step. Step 13 Configure Forms To configure Forms 11g we start the Configuration Wizard (config.sh) in FORMS_HOME/bin. This wizard should create a new WebLogic Domain and an OHS instance! Do not extend existing domains or instances! Forms should run in its own instances! When all information is supplied, the wizard will create the domain and instance and starts them automatically.Step 14 Setup your Forms SSO EnvironmentOnce you have implemented and tested your Forms 11g instance, you can configured it for SSO. Yes, this requires the old Oracle AS SSO solution, OIDDAS for creating and assigning users and SSO to setup your partner applications. In this step you should consider to create every user necessary for use within the environment. When done, do not forget to test it. Step 15 Migrate the SSO Repository Since the final goal is to get rid of the old SSO implementation we need to migrate the old SSO repository into the new OID structure. Additionally, this step will also migrate all partner application configurations into OAM 11g. Quite convenient. To do this step, you have to start the upgrade agent (ua or ua.bat or ua.cmd) on the operating system level in $IAM_HOME/bin. Once finished, this wizard will create new osso.conf files for each partner application in $IAM_HOME/upgrade/temp/oam/.Note: At the time of this writing, this step only works if everything is on the same host (ie. OID, OAM, etc.). This restriction might be lifted in later releases. Step 16 Change your OHS sso.conf and shut down OC4J_SECURITY In Step 14 we verified that SSO for our Forms environment works fine. Now, we are shutting the old system done and reconfigure the OHS that acts as the Forms entry point. First we go to the OHS configuration directory and rename the old osso.conf  to osso.conf.10g. Now we change the moduleconf/mod_osso.conf  to point to the new osso.conf file. Copy the new osso.conf  file from $IAM_HOME/upgrade/temp/oam/ to the OHS configuration directory. Restart OHS, test forms by using the same forms links. OAM should now kick in and show the login dialog to ask for your user credentials.Done. Now your Forms environment is successfully integrated with OAM 11g.Enjoy. What's Next? This rather lengthy setup is just the foundation for your growing environment of OAM 11g protections. In the next entry we will show that Forms 11g and ADF Faces 11g can use the same OAM installation and provide real single sign-on. References Nearly everything is documented. Use the documentation! Oracle® Fusion Middleware Installation Guide for Oracle Identity Management 11gR1 Oracle® Fusion Middleware Installation Guide for Oracle Identity Management 11gR1, Chapter 11-14 Oracle® Fusion Middleware Administrator's Guide for Oracle Access Manager 11gR1, Appendix B Oracle® Fusion Middleware Upgrade Guide for Oracle Identity Management 11gR1, Chapter 10   

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you’ll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you’ve read my previous blog posts, you’ll be aware that I’ve been focusing on the database continuous integration theme. In my CI setup I create a “production”-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it’s not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn’t I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn’t an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley’s “Continuous Delivery” teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you’ve been allotted. 2. It’s not just about the storage requirements, it’s also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I’m just not going to get the feedback quickly enough to react. So what’s the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I’m sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server’s point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no ‘duplicate’ storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly “release test” process triggered by my CI tool. RESTORE DATABASE WidgetProduction_Virtual FROM DISK=N'D:\VirtualDatabase\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE WidgetProduction_Virtual WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the ‘virtual’ restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• SOA Checklist

  - by pat.shepherd

  In a recent meeting, the customer brought up a valid question: “How do I know if a problem/system is a good candidate for using SOA (vs. using old but trusted techniques).  I put this checklist together.  If you can answer yes to 2 or more of these, it might well be a good candidate.  This is V1, and I will likely update it over time.  Comments (that are not spam or sales pitches) appreciated. Part of the conversation was also around the fact that SOA has two faces to it; one is around the obvious reuse possibilities. The other, that often gets forgotten, is that SOA provides goodness in terms of simplifying integration even where opportunities to reuse those integrations are small; at least the integrations are standards-based and more flexible.  I did not write a lot of verbiage about each of them, for example “Business Process” implies that there is a set of step-wise actions that need to take place in a coordinated fashion that include integrating with systems (and sometimes people for approvals and other human-only actions) in the process.  

  Read the article

• Network Solutions Gold VIP Program

  - by GGBlogger

  Today I received an email advising me “Congratulations! You have been selected for the Network Solutions Gold VIP Program” Now I get a bunch of messages from Network Solutions because a long time ago I chose them as my registrar. I usually just save these to my Outlook Network Solutions folder and move on. This time my wife was in the room and I chuckled and said something about “Network Solutions has made me a Gold VIP member.” She said “So what does that mean?” Prompted by that I scrolled down the page to look at my “perks". Let’s see – Special pricing, 1 year free Web Forwarding, 1 hour of free support… etc etc until I hit “Enrollment in SafeRenew* SafeRenew* simplifies your renewal process. It protects your domain name registrations and corresponding services in the event you forget or are unable to renew on time. I’m thinking “Now ain’t that neat” I don’t use auto renew anyway and never have. Then I continued reading: Beginning June 24th, 2012 your domains* (that’s 10 days away) will automatically renew. To ensure continuation of service, please be certain you have a valid credit card on file. If you do not wish for your services to be automatically renewed, please click here to log into account manager and opt out of the SafeRenew™ service. Whoa Network Solutions is going to start spending my money without so much as a by your leave sir!!! I don’t bloody think so and how truly magnanimous of them I can “click here” to opt out of what I didn’t opt in for. Talk about furious! I still am. Now the kicker is: if my wife hadn’t been curious and if I’d had a working credit card on file I wouldn’t have know this until one of my unwanted domain names auto renewed. Of course I was told “Oh – we’d have refunded your money” to which I say bull. In my view Networks Solutions is guilty of a crime of some sort. They DO NOT have a right to spend my money without asking!!!!! So watch out folks.

  Read the article

• Succesful Hosted TFS Event at VISUG by Hassan Fadili at Microsoft Belgium

  - by hassanfadili

  On Tuesday November 22th, VISUG User Group has hosted an event at Microsoft Belgium about Hosted TFS by Hassan Fadili see http://www.visug.be/Eventdetails/tabid/95/EventId/48/Default.aspx. This event was very interactive and many as 60 people have taken part. The topic was about Build, Relase and Deploy with TFS2011 and MS Deploy. A combination of Slides and Demo's was perfect to explain this common mechanism for developers.To learn more about this topic check the earlier article pubished by Hassan Fadili for Software Developer Network Community at: http://www.sdn.nl/SDN/Artikelen/tabid/58/view/View/ArticleID/3199/Build-Release-and-Deploy-BRD-using-TFS2010-MS-Web-Deploy-and-WIX3X.aspxIf you have questions/Suggestions or thoughts about this topic, feel free to contact me by E-mail: [email protected] and/or via Twitter: @HassanFad

  Read the article

• When OneTug Just Isn&rsquo;t Enough&hellip;

  - by onefloridacoder

  I stole that from the back of a T-shirt I saw at the Orlando Code Camp 2010.  This was my first code camp and my first time volunteering for an event like this as well.  It was an awesome day.  I cannot begin to count the “aaahh”, “I did-not-know I could do that”, in the crowds and for myself.  I think it was a great day of learning for everyone at all levels.  All of the presenters were different and provided great insights into the topics they were presenting.  Here’s a list of the ones that I attended. KodeFuGuru, “Pirates vs. Ninjas” He touched on many good topics to relax some of the ways we think when we are writing out code, and still looks good, readable, etc.  As he pointed out in all of his examples, we might not always realize everything that’s going on under the covers.  He exposed a bug in his own code, and verbalized the mental gymnastics he went through when he knew there was something wrong with one of his IEnumerable implementations.  For me, it was great to hear that someone else labors over these gut reactions to code quickly snapped together, to the point that we rush to the refactor stage to fix what’s bothering us – and learn.  He has some content on extension methods that was very interesting.  My “that is so cool” moment was when he swapped out AddEntity method on an entity class and used a With extension method instead.  Some of the LINQ scales fell off my eyes at that moment, and I realized my own code could be a lot more powerful (and readable) if incorporate a few of these examples at the appropriate times.  And he cautioned as well… “don’t go crazy with this stuff”, there’s a place and time for everything.  One of his examples demo’d toward the end of the talk is on his sight where he’s chaining methods together, cool stuff. Quotes I liked: “Extension Methods - Extension methods to put features back on the model type, without impacting the type.” “Favor Declarative Code” – Check out the ? and ?? operators if you’re not already using them. “Favor Fluent Code” “Avoid Pirate Ninja Zombies!  If you see one run!” I’m definitely going to be looking at “Extract Projection” when I get into VS2010. BDD 101 – Sean Chambers http://github.com/schambers This guy had a whole host of gremlins against him, final score Sean 5, Gremlins 1.  He ran the code samples from his github repo  in the code github code viewer since the PC they school gave him to use didn’t have VS installed. He did a great job of converting the grammar between BDD and TDD, and how this style of development can be used in integration tests as well as the different types of gated builds on a CI box – he didn’t go into a discussion around CI, but we could infer that it could work. Like when we use WSSF, it does cause a class explosion to happen however the amount of code per class it limit to just covering the concern at hand – no more, no less.  As in “When I as a <Role>, expect {something} to happen, because {}”  This keeps us (the developer) from gold plating our solutions and creating less waste.  He basically keeps the code that prove out the requirement to two lines of code.  Nice. He uses SpecUnit to merge this grammar into his .NET projects and gave an overview on how this ties into writing his own BDD tests.  Some folks were familiar with Given / When / Then as story acceptance criteria and here’s how he mapped it: “Given <Context>  When <Something Happens> Then <I expect...>”  There are a few base classes and overrides in the SpecUnit framework that help with setting up the context for each test which looked very handy. Successfully Running Your Own Coding Business The speaker ran through a list of items that sounded like common sense stuff LLC, banking, separating expenses, etc.  Then moved into role playing with business owners and an ISV.  That was pretty good stuff, it pays to be a good listener all of the time even if your client is sitting on the other side of the phone tearing you head off for you – but that’s all it is, and get used to it its par for the course.  Oh, yeah always answer the phone was one simple thing that you can do to move  your business forward.  But like Cory Foy tweeted this week, “If you owe me a lot of money, don’t have a message that says your away for five weeks skiing in Colorado.”  Lots of food for thought that’s on my list of “todo’s and to-don’ts”. Speaker Idol Next, I had the pleasure of helping Russ Fustino tape this part of Code Camp as my primary volunteer opportunity that day.  You remember Russ, “know the code” from the awesome Russ’ Tool Shed series.  He did a great job orchestrating and capturing the Speaker Idol finals.   So I didn’t actually miss any sessions, but was able to see three back to back in one setting.  The idol finalists gave a 10 minute talk and very deep subjects, but different styles of talks.  No one walked away empty handed for jobs very well done.  Russ has details on his site.  The pictures and  video captured is supposed to be published on Channel 9 at a later date.  It was also a valuable experience to see what makes technical speakers effective in their talks.  I picked up quite a few speaking tips from what I heard from the judges and contestants. Design For Developers – Diane Leeper If you are a great developer, you’re probably a lousy designer.  Diane didn’t come to poke holes in what we think we can do with UI layout and design, but she provided some tools we can use to figure out metaphors for visualizing data.  If you need help with that check out Silverlight Pivot – that’s what she was getting at.  I was first introduced to her at one of John Papa’s talks last year at a Lakeland User Group meeting and she’s very passionate about design.  She was able to discuss different elements of Pivot, while to a developer is just looked cool. I believe she was providing the deck from her talk to folks after her talk, so send her an email if you’re interested.   She says she can talk about design for hours and hours – we all left that session believing her.   Rinse and Repeat Orlando Code Camp 2010 was awesome, and would totally do it again.  There were lots of folks from my shop there, and some that have left my shop to go elsewhere.  So it was a reunion of sorts and a great celebration for the simple fact that its great to be a developer and there’s a community that supports and recognizes it as well.  The sponsors were generous and the organizers were very tired, namely Esteban Garcia and Will Strohl who were responsible for making a lot of this magic happen.  And if you don’t believe me, check out the chatter on Twitter.

  Read the article

• New Article on OTN: Tips for Securing an Oracle Linux Environment

  - by Lenz Grimmer

  Some time ago, we published Tips for Hardening an Oracle Linux Server on the Oracle Technology Network. This article focused on hardening an Oracle Linux system right after the initial installation, exploring administrative approaches that help to minimize vulnerabilities. This week we issued a second part,Tips for Securing an Oracle Linux Environment, which focuses on the operational part: detecting intrusion attempts, auditing and keeping systems up-to date and protected. If you manage Oracle Linux systems in your environment, check out these articles for some invaluable hints and suggestions on how to improve and maintain security of these servers!

  Read the article

• C++ Little Wonders: The C++11 auto keyword redux

  - by James Michael Hare

  I’ve decided to create a sub-series of my Little Wonders posts to focus on C++.  Just like their C# counterparts, these posts will focus on those features of the C++ language that can help improve code by making it easier to write and maintain.  The index of the C# Little Wonders can be found here. This has been a busy week with a rollout of some new website features here at my work, so I don’t have a big post for this week.  But I wanted to write something up, and since lately I’ve been renewing my C++ skills in a separate project, it seemed like a good opportunity to start a C++ Little Wonders series.  Most of my development work still tends to focus on C#, but it was great to get back into the saddle and renew my C++ knowledge.  Today I’m going to focus on a new feature in C++11 (formerly known as C++0x, which is a major move forward in the C++ language standard).  While this small keyword can seem so trivial, I feel it is a big step forward in improving readability in C++ programs. The auto keyword If you’ve worked on C++ for a long time, you probably have some passing familiarity with the old auto keyword as one of those rarely used C++ keywords that was almost never used because it was the default. That is, in the code below (before C++11): 1: int foo() 2: { 3: // automatic variables (allocated and deallocated on stack) 4: int x; 5: auto int y; 6:  7: // static variables (retain their value across calls) 8: static int z; 9:  10: return 0; 11: } The variable x is assumed to be auto because that is the default, thus it is unnecessary to specify it explicitly as in the declaration of y below that.  Basically, an auto variable is one that is allocated and de-allocated on the stack automatically.  Contrast this to static variables, that are allocated statically and exist across the lifetime of the program. Because auto was so rarely (if ever) used since it is the norm, they decided to remove it for this purpose and give it new meaning in C++11.  The new meaning of auto: implicit typing Now, if your compiler supports C++ 11 (or at least a good subset of C++11 or 0x) you can take advantage of type inference in C++.  For those of you from the C# world, this means that the auto keyword in C++ now behaves a lot like the var keyword in C#! For example, many of us have had to declare those massive type declarations for an iterator before.  Let’s say we have a std::map of std::string to int which will map names to ages: 1: std::map<std::string, int> myMap; And then let’s say we want to find the age of a given person: 1: // Egad that's a long type... 2: std::map<std::string, int>::const_iterator pos = myMap.find(targetName); Notice that big ugly type definition to declare variable pos?  Sure, we could shorten this by creating a typedef of our specific map type if we wanted, but now with the auto keyword there’s no need: 1: // much shorter! 2: auto pos = myMap.find(targetName); The auto now tells the compiler to determine what type pos should be based on what it’s being assigned to.  This is not dynamic typing, it still determines the type as if it were explicitly declared and once declared that type cannot be changed.  That is, this is invalid: 1: // x is type int 2: auto x = 42; 3:  4: // can't assign string to int 5: x = "Hello"; Once the compiler determines x is type int it is exactly as if we typed int x = 42; instead, so don’t' confuse it with dynamic typing, it’s still very type-safe. An interesting feature of the auto keyword is that you can modify the inferred type: 1: // declare method that returns int* 2: int* GetPointer(); 3:  4: // p1 is int*, auto inferred type is int 5: auto *p1 = GetPointer(); 6:  7: // ps is int*, auto inferred type is int* 8: auto p2 = GetPointer(); Notice in both of these cases, p1 and p2 are determined to be int* but in each case the inferred type was different.  because we declared p1 as auto *p1 and GetPointer() returns int*, it inferred the type int was needed to complete the declaration.  In the second case, however, we declared p2 as auto p2 which means the inferred type was int*.  Ultimately, this make p1 and p2 the same type, but which type is inferred makes a difference, if you are chaining multiple inferred declarations together.  In these cases, the inferred type of each must match the first: 1: // Type inferred is int 2: // p1 is int* 3: // p2 is int 4: // p3 is int& 5: auto *p1 = GetPointer(), p2 = 42, &p3 = p2; Note that this works because the inferred type was int, if the inferred type was int* instead: 1: // syntax error, p1 was inferred to be int* so p2 and p3 don't make sense 2: auto p1 = GetPointer(), p2 = 42, &p3 = p2; You could also use const or static to modify the inferred type: 1: // inferred type is an int, theAnswer is a const int 2: const auto theAnswer = 42; 3:  4: // inferred type is double, Pi is a static double 5: static auto Pi = 3.1415927; Thus in the examples above it inferred the types int and double respectively, which were then modified to const and static. Summary The auto keyword has gotten new life in C++11 to allow you to infer the type of a variable from it’s initialization.  This simple little keyword can be used to cut down large declarations for complex types into a much more readable form, where appropriate.   Technorati Tags: C++, C++11, Little Wonders, auto

  Read the article

• Using the JRockit Flight Recorder as an In-Flight Black Box

  - by Marcus Hirt

  The new JRockit Flight Recorder has some very interesting properties. It can be used like the black box of an airplane, allowing users to go back in time and check what was happening around the time when something went wrong. Here is how to enable the default continuous recording in JRockit to allow for that use case. The flight recorder is on by default in JRockit R28, the problem is that there is no recording running by default. To configure JRockit to start with the default recording running, add the parameter: -XX:FlightRecorderOptions=defaultrecording=true That will enable a recording with recording ID 0. You can see that it has been started properly by choosing Show Recordings from the context menu in JRockit Mission Control.   You should see something similar to the picture below. Simply right click on the recording and select dump to dump information available in the flight recorder. You can select to dump data for a specific period of time or all data. For more information about the command line parameters available to control the Flight Recorder, see the JRockit documentation.

  Read the article

• Rouen Business School builds its entire back office UI with Visual WebGui

  - by Webgui

  Two years ago, Rouen Business School (AMBA accredited institution located in Rouen, Normandy, France) decided to develop and implement a proprietary information system in-house. The objective was to administer all the data encompassed by a classic 3500 Students business school: from on-line application forms to the registration system including financial information, scheduling, grades management, etc. The development team at Rouen Business School chose Visual WebGui for the UI. “When we tested the Visual WebGui solution we were really amazed and enthusiastic. It was exactly the kind of solution we were looking for… The great performance of the solution allows us to manage a large amount of information with no delay with a very positive feedback at the user end,” said Stéphane Henry the IT Project Manager of the school.   As a result of the fast development, easy deployment, performance, and professional design that the team experienced with Visual WebGui, the entire back office of Rouen Business School information system was chosen to be developed with the Visual WebGui framework “and after two years we do not see any reason to change this,” commented Stéphane Henry who added that “all the original requirements were satisfied using Visual WebGui.” You can read the full Case study here >

  Read the article

• Where I&rsquo;ve Been

  - by Lee Brandt

  Hey all. I am still here. Still kickin’. I’ve been swamped with work and community stuff. But I wanted to post about some of the things going on. Just finished up Twin Cities Code Camp 8, and had a blast! Always good to see these guys. First of all, up-coming speaking engagements: Iowa Code Camp – May 1st in Iowa City, IA [more info] DevLink – August 5-7 in Nashville, TN [more info]   Plus I am organizing a second developer’s conference in Kansas City. Kansas City Developer’s Conference (KCDC) – June 19th in Kansas City [more info]   I will also be doing Lunch & Learns for my company in April and May at JCCC: April 29th, May 12th and May 27th at Johnson County Community College in Kansas City.   So May, June and August are covered. I may just take July off, I could use a break after KCDC is over.

  Read the article

• Java Developer Days India Trip Report

  - by reza_rahman

  You are probably aware of Oracle's decision to discontinue the relatively resource intensive regional JavaOnes in favor of more Java Developer Days, virtual events and deeper involvement with independent conferences. In comparison to the regional JavaOnes, Java Developer Days are smaller, shorter (typically one full day), more focused (mostly Oracle speakers/topics) and more local (targeting cities). For those who have been around the Java ecosystem for a few years, they are basically the current incarnation of the highly popular and developer centric Sun Tech Days. October 21st through October 25th I spoke at Java Developer Days India. This was basically three separate but identical events in the cities of Pune (October 21st), Chennai (October 24th) and Bangalore (October 25th). For those with some familiarity with India, other than Hyderabad these cities are India's IT powerhouses. The events were basically focused on Java EE. I delivered five of the sessions (yes, you read that right), while my friend NetBeans Group Product Manager Ashwin Rao delivered three talks. Jagadish Ramu from the GlassFish team India helped me out in Bangalore by delivering two sessions. It was also a pleasure to introduce my co-contributor to the Cargo Tracker Java EE Blue Prints project Vijay Nair at Bangalore during the opening talk. I thought it was a great dynamic between Ashwin and I flipping between talking about the new features and demoing live code in NetBeans. The following were my sessions (source PDF and abstracts posted as usual on my SlideShare account): JavaEE.Next(): Java EE 7, 8, and Beyond Building Java HTML5/WebSocket Applications with JSR 356 What’s New in Java Message Service 2 JAX-RS 2: New and Noteworthy in the RESTful Web Services API Using NoSQL with JPA, EclipseLink and Java EE The event went well and was packed in all three cities. The Q&A was great and Indian developers were particularly generous with kind words :-). It seemed the event and our presence was appreciated in the truest sense which I must say is a rarity. The events were exhausting but very rewarding at the same time. As hectic as the three city trip was I tried to see at least some of the major sights (mostly at night) since this was my very first time to India. I think the slideshow below is a good representation of the riddle wrapped up in an enigma that is India (and the rest of the Indian sub-continent for that matter): Ironically enough what struck me the most during this trip is the woman pictured below - Shushma. My chauffeur, tour guide and friend for a day, she fluidly navigated the madness that is Mumbai traffic with skills that would make Evel Knievel blush while simultaneously pointing out sights and prompting me to take pictures (Mumbai was my stopover and gateway to/from India). In some ways she is probably the most potent symbol of the new India. When we parted ways I told her she should take solace in the fact she has won mostly without a fight a potentially hazardous battle her sisters across the Arabian sea are still fighting. I'm not sure she entirely understood the significance of what I told her. I hope that she did. I also had occasion to take a pretty cool local bus ride from Chennai to Bangalore instead of yet another boring flight. All in all I really enjoyed the trip to India and hope to return again soon. Jai Hind :-)!

  Read the article

• ADF Bounded Taskflow Activation

  - by Vijay Mohan

  hey guys, It's really been a while since I last blogged. Just came across a hard-to-debug scenario, so thought of sharing it for the benefit of ADF developers.I had a page fragment(jsff) wrapped inside a  bounded taskflow, for which the activation was conditional and was based on a requestScope property (be it a requestScope variable or a property coming from a requestScope bean). As soon as the taskflow activates and page renders the requestScope parameters life span ends. After that, when you raise an event inside the page (click of commandLink, moseHover, valueChange event etc) then for the first time the event gets fired but it fails to affect the change in the page, moreover, for the subsequent times the event itself doesn't get fired. Any guesses as to what could be the culprit..?I guess, I already gave the reason in the initial paragraph. For the first time when the event gets fired, the fwk sees that the page is already lying in inactivate state, so it fails to affect the change and for subsequent times it doesn't even fire the event because it already knew that the page/region is inactive. So, in such a scenario we must use either a pageFlowScope property or transientVO property which could exist till the page's life span.

  Read the article

• Build Open JDK 7 on Mac OSX (TOTD #172)

  - by arungupta

  The complete requirements, pre-requisites, and steps to build OpenJDK 7 port on Mac OSX are described here. The steps are very clearly explained and here are the exact ones I followed on my MacBook Pro 10.7.2: Confirm the version of pre-installed Java as: > java -versionjava version "1.6.0_26"Java(TM) SE Runtime Environment (build 1.6.0_26-b03-383-11A511c)Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02-383, mixed mode) Download and install Mercurial from mercurial.berkwood.com (zip bundle for 10.7 is here). It gets installed in the /usr/local/bin directory. Get the source code as (commands highlighted in bold): hg clone http://hg.openjdk.java.net/macosx-port/macosx-port destination directory: macosx-port requesting all changes adding changesets adding manifests adding file changes added 437 changesets with 364 changes to 33 files updating to branch default 31 files updated, 0 files merged, 0 files removed, 0 files unresolved cd macosx-port chmod 7555 get_source.sh ./get_source.sh # Repos:  corba jaxp jaxws langtools jdk hotspot Starting on corba Starting on jaxp Starting on jaxws Starting on langtools Starting on jdk Starting on hotspot # hg clone http://hg.openjdk.java.net/macosx-port/macosx-port/corba corba requesting all changes adding changesets adding manifests adding file changes added 396 changesets with 3275 changes to 1379 files . . . # exit code 0 # cd ./corba && hg pull -u pulling from http://hg.openjdk.java.net/macosx-port/macosx-port/corba searching for changes no changes found # exit code 0 # cd ./jaxp && hg pull -u pulling from http://hg.openjdk.java.net/macosx-port/macosx-port/jaxp searching for changes no changes found # exit code 0 Install Xcode from the App Store. Include /Developer/usr/bin in PATH. Note: JDK 1.6.0_26 ame pre-installed on my laptop and I installed Xode after that. The compilation went fine and there was no need to re-install the Java for Mac OS X as mentioned in the original steps. Build the code as: make ALLOW_DOWNLOADS=true SA_APPLE_BOOT_JAVA=true ALWAYS_PASS_TEST_GAMMA=true ALT_BOOTDIR=`/usr/libexec/java_home -v 1.6` HOTSPOT_BUILD_JOBS=`sysctl -n hw.ncpu` The final output is shown as: >>>Finished making images @ Sat Nov 19 00:59:04 WET 2011 ... >>>Finished making images @ Sat Nov 19 00:59:04 WET 2011 ...############################################################################# Leaving jdk for target(s) sanity all docs images ################################################################################## Build time 00:17:42 jdk for target(s) sanity all docs images ############################################################################### Build times ##########Target all_product_buildStart 2011-11-19 00:32:40End 2011-11-19 00:59:0400:01:46 corba00:04:07 hotspot00:00:51 jaxp00:01:21 jaxws00:17:42 jdk00:00:37 langtools00:26:24 TOTAL######################### Change the directory and verify the version: >cd build/macosx-universal/j2sdk-image/1.7.0.jdk/Contents/Home/bin >./java -version openjdk version "1.7.0-internal" OpenJDK Runtime Environment (build 1.7.0-internal-arungup_2011_11_19_00_32-b00) OpenJDK 64-Bit Server VM (build 21.0-b17, mixed mode) Now go fix some bugs, file new bugs, or discuss at the macosx-port-dev mailing list.

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >