Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 126/1213 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• wireless LAN soft blocked on Ubuntu 13.10

  - by iacopo

  I've troubles with bluetooth and with lan. When I digit: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no When I digit: lspci -v 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Flags: bus master, 66MHz, medium devsel, latency 0 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at f000 [size=256] Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: radeon 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at feb48000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: xhci_hcd 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Advanced Micro Devices, Inc. [AMD] Device 7800 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 45 I/O ports at f190 [size=8] I/O ports at f180 [size=4] I/O ports at f170 [size=8] I/O ports at f160 [size=4] I/O ports at f150 [size=16] Memory at feb50000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4f000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4c000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller Flags: 66MHz, medium devsel Kernel driver in use: piix4_smbus 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f100 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (prog-if 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller Flags: bus master, 66MHz, medium devsel, latency 39, IRQ 16 Memory at feb4a000 (64-bit, non-prefetchable) [size=256] Kernel driver in use: sdhci-pci 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Capabilities: Kernel driver in use: pcieport 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-feafffff Capabilities: Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 Flags: fast devsel 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 Flags: fast devsel Capabilities: Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 Flags: fast devsel 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 Flags: fast devsel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Subsystem: PC Partner Limited / Sapphire Technology Device 0123 Flags: bus master, fast devsel, latency 0, IRQ 46 I/O ports at e000 [size=256] Memory at d0004000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: AzureWave Device 2b87 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at fea40000 (32-bit, non-prefetchable) [size=64K] Memory at fea30000 (32-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: rt2800pci 03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: AzureWave Device 2787 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fea20000 (32-bit, non-prefetchable) [size=64K] Memory at fea10000 (32-bit, non-prefetchable) [size=64K] Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fea00000 [disabled] [size=64K] Capabilities: Thank you for all the help

  Read the article

• Ubuntu 11.10 on MacBook Air 2011 - problems with drivers

  - by RankoR

  I had just installed Ubuntu 11.10 on my MacBook Air, and have a lot of problems. I used this tutorial, after executing script and rebooting some problems were solved, but now I have completely not working touchpad, keyboard & screen backlight works incorrect (screen brightness is not 100%, but it is 100% in settings, keyboard backlight turns on/off randomly). How to fix it? P. S. Script said that it's no such file or directory for some .icc file. Google says, that I should copy it from Mac OS X drive, but I completely replaced it with Ubuntu.

  Read the article

• How does one find out which application is associated with an indicator icon?

  - by Amos Annoy

  It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. some pertinent references (src: answer to What is the difference between indicators and a system tray?: Here is the documentation for indicators: Application indicators | Ubuntu App Developer libindicate Reference Manual libappindicator Reference Manual also DesktopExperienceTeam/ApplicationIndicators - Ubuntu Wiki ref: How can the application that makes an indicator icon be identified? bookmark: How does one find out which application is associated with an indicator icon in Ubuntu 12.04? is a serious question for reasons & problems outlined below and for which a significant investment has been made and is necessary for remedial purposes. reviewing refs. to find an orchestrated resolution ... (an indicator ap. indicator maybe needed) This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? How are the sub-indicator applications identified? These are the aps associated with the components of an indicators drop-down menu. (This was to be a separate question and quite naturally follows up the progression. It is included here as it is obvious there is no provisioning to track down offending either sub or indicator aps. easily.) (The examination of SM points out a rather poignant factor in the faster battery depletion and shortened run time - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously, in 10.04, it was well under 10%, between 5% and 7%! - the huge inordinate cpu overhead originates from Xorg and compiz - after booting the system, only SM is run and All Processes are selected, sorting on %CPU - switching between Resources and Processes profiles the execution overhead problem - running another ap like gedit "Text Editor" briefly gives it CPU priority - going back to S&M several aps. are at the top of the list in order: gnome-system-monitor as expected, then: Xorg, compiz, unity-panel-service, hud-service, with dbus-daemon and kworker/x:y's mixed in with some expected daemons and background tasks like nm-applet - not only do Xorg and compiz require excessive CPU time but their entourage has to come along too! further exacerbating the problem - our compute bound tasks no longer work effectively in the field - reduced battery life, reduced CPU time for custom ap.s etc. - and all this precipitated from an examination of what is going on with the battery ap. indicator - this was and is not a flippant, rhetorical or idle musing but has consequences for the credible deployment of 12.04 to reduce the negative impact of its overhead in a production environment) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.: NM vs. iwlist/iwconfig conflict, BT ap. vs RF switch, Battery ap. w/ no suspend/sleep for poor battery runtime, ... the list goes on) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery ap. identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators A reference in the comments was given to: What is the difference between indicators and a system tray? quoting from that source ... Unfortunately desktop indicators are not well documented yet: I couldn't find any specification doc ... Well ... the actual document https://wiki.ubuntu.com/DesktopExperienceTeam/ApplicationIndicators#Summary does not help much but it's existential information provides considerable insight ...

  Read the article

• Empathy chat limits the number of contacts displayed?

  - by Ka7anax

  I'm using Empathy Chat with these accounts: GTalk & Facebook. I just noticed now that from my GTalk friends only 6 appear online (including me) and in reality online are 14 (checked on GMail). And from Facebook it displays 44. So is Empathy Chat limited to display only 50 contacts? I looked through the settings and didn't see anything like this :| The worst part is that I have 1 GTalk contact as Favorite and it's not in the list... Is it a bug? PS: I'm using Ubuntu 10.10

  Read the article

• How can I reinstall XRandR without serious disruption to 12.04?

  - by broiyan

  This is the sequence that leads to xrandr going missing: Installed 12.04 on a system with a motherboard using the Intel G45 chipset and the E8400 Core 2 Duo and AMD Radeon HD 5450 video card. Installed fglrx when ubuntu prompted via Additional Drivers. Ran Catalyst (Administrative) to select multi-desktop and rebooted. Ran Catalyst (Administrative) to select Xinerama and rebooted. Answer yes to about 3 prompts that request to send bug reports to ubuntu. At this point Settings > Appearances no longer offers the widget that allows you to resize the Unity Launcher icons. Also Settings > Displays says randr extension is not present. BTW: This same sequence is repeatable, including the issues with the missing icon resizer and xrandr, so there is clearly bug fixing potential here. How can I get xrandr reinstalled without un-installing a large set of dependencies? I realize that if I un-install xrandr I will have the chance to re-install but the number of dependencies is large and so an un-install will cause many systems to be un-installed and I am afraid that will ruin Ubuntu 12.04. Hence, I'm looking for a more direct fix. I thought rebooting the .ISO disk and reinstalling would be a good fix but obviously not since this problem is repeatable.

  Read the article

• how to reinstall/repair ubuntu 12.04 after dual boot installation fails with windows 7

  - by Rini

  I have installed Ubuntu 12.04 on my preinstalled windows 7 Sony vaio s series laptop following instructions here: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ Everything went well and I am able to boot in to windows after complete installation of Ubuntu. Now following instructions on web I tried to add Ubuntu to my BIOS using Easy BCD (but forget to add windows 7 entry). As a result, I loose windows 7 OS and can't boot in to either OS then I successfully repaired windows 7 using recovery CD. Now my problem is that I can't reinstall Ubuntu 12.04 using Live CD it halts every time before disk partition step giving error. "ubi-partman crashed". "ubi-partman failed with exit code 141. further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken." and, any choice to continue will result in the same error. I looked in to /var/log/syslog but not able to understand what is error. Then, I ran sudo fdisk -l to view my partitions and it shows me only one partition. Probably, all the partitions I created for Ubuntu 12.04 are lost while running windows 7 recovery CD. So, I don't know whether the Ubuntu is still there or probably corrupted. My boot-info URL is: http://paste.ubuntu.com/1202146/ Please tell me how to remove this error so that I can reinstall/repair Ubuntu 12.04 Thanks in advance. R Shukla My boot-info URL is: http://paste.ubuntu.com/1202146/ Please tell me how to remove this error so that I can reinstall/repair Ubuntu 12.04 Thanks for your help! I tried to boot from the CD but I every time it give me error before disk partitioning step. Also, I am unable to start Gparted. "ubi-partman crashed". "ubi-partman failed with exit code 141. further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken." and, any choice to continue will result in the same error. I looked in to /var/log/syslog but not able to understand what is error. Then, I ran sudo fdisk -l to view my partitions and it shows me only ne partition. Probaply, all the partitions I created for Ubuntu 12.04 are lost while running windows 7 recovery CD. Please tell me how to remove this error. Best Regards, R S

  Read the article

• Problem with SNMP and MIBs

  - by jap1968

  I am installing Zabbix to monitor via snmp some devices from a machine running Ubuntu 12.04 server. There is a problem with MIB definitions, since snmp commands do no properly translate some of the MIBs. I have already installed the "snmp-mibs-downloader" package, so the files containing the MIB descriptions are properly installed. The MIB are only translated to obtain the numeric key (the MIB files are accessible to the snmp commands), but the results returned by the snmpget command do not properly translate the key. The zabbix templates that I am using do expect the key translated (SNMPv2-MIB::sysUpTime.0) , so, the current results are not recognised and these are ignored. Test case: $ snmptranslate -On SNMPv2-MIB::sysUpTime.0 .1.3.6.1.2.1.1.3.0 $ snmpget -v 2c -c public 192.168.1.1 1.3.6.1.2.1.1.3.0 iso.3.6.1.2.1.1.3.0 = Timeticks: (2911822510) 337 days, 0:23:45.10 On another machine (running a very old Red Hat based distribution), the snmp commands perform both, the directe and reverse traslation, as expected: # snmptranslate -On SNMPv2-MIB::sysUpTime.0 .1.3.6.1.2.1.1.3.0 # snmpget -v 2c -c public 192.168.1.1 1.3.6.1.2.1.1.3.0 SNMPv2-MIB::sysUpTime.0 = Timeticks: (2911819485) 337 days, 0:23:14.85 What is the problem on my Ubuntu box? Is there something I am missing?

  Read the article

• Where can I find the application executables in the filesystem?

  - by richzilla

  Where are executables for programs stored in Ubuntu? An application (Komodo Edit) is asking me to identify an application to be used as a web browser. I've become used to just entering the application name as a command for situations such as these, but this scenario got me thinking. I know in Windows it would just be the relevant application folder in the 'program files' folder, but I'm assuming things are a bit different on Linux? I thought somewhere like bin would be logical but this appears to standard Linux/Unix applications. Where would I find the binary executable for applications stored on my system?

  Read the article

• How do I build and install the gspca webcam driver?

  - by sam

  I tried to install gspca to run Orite webcam on Ubuntu 12.04 64-bit, but I failed. It lost a lot of headers, here are my instructions but failed. wget http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz tar zxvf gspcav1-20071224.tar.gz cd gspcav1-20071224/ sudo ./gspca_build sudo touch /usr/src/linux-headers-3.2.0-25-generic/include/linux/config.h sudo mkdir /usr/src/linux-headers-3.2.0-25-generic/include/asm sudo touch /usr/src/linux-headers-3.2.0-25-generic/include/asm/semaphore.h sudo touch /usr/src/linux-headers-3.2.0-25-generic/include/linux/videodev.h sudo touch /usr/src/linux-headers-3.2.0-25-generic/include/linux/smp_lock.h How to solve it? I move to /usr/src and make: sam@sam:/usr/src/gspcav1-20071224$ sudo make make -C /lib/modules/`uname -r`/build SUBDIRS=/usr/src/gspcav1-20071224 CC=cc modules make[1]: Entering directory `/usr/src/linux-headers-3.2.0-25-generic' CC [M] /usr/src/gspcav1-20071224/gspca_core.o /usr/src/gspcav1-20071224/gspca_core.c:37:26: fatal error: linux/config.h: No such file or directory compilation terminated. make[2]: *** [/usr/src/gspcav1-20071224/gspca_core.o] Error 1 make[1]: *** [_module_/usr/src/gspcav1-20071224] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.2.0-25-generic' make: *** [default] Error 2 sam@sam:/usr/src/gspcav1-20071224$

  Read the article

• Bootloader error Ubuntu 12.04, system goes to Grub-rescue instead of booting

  - by user83508

  I am trying to install ubuntu 12.04 on my system but it is constantly giving me bootloader install fail error. I have tried to lot to solve this issue but reading articles over the internet but still no gain. Firstly since the bootloader was not getting installed I tried to install it on all the alternative paths given in the installer, failing with I selected install ubuntu without bootloader. Then I tried to manually install bootloader via terminal at try ubuntu via grub-install, but I was not able to do that. Then I tried using boot-repair and it was also not able to install the bootloader because after it my system shows grub-rescue. I tried to use boot-repair and install bootloader on a seperate partition mounted to /boot and still my system is booting and it still shows grub-rescue. The error which my system shows during boot is: Error : no such device : 04ac0510-bd4f-43b8-b885-b885-11c4dec21db8 I am not dual booting and ubuntu is the only OS I am installing. I am using Raid 0 with two blue western digital hard drive so I am not sure whether it is right or not. The details given by boot-repair are in the below mentioned link; http://paste.ubuntu.com/1147208/ Afterwards, I made one more change I installed ubuntu again and this time I installed the bootloader at a different partition on /boot. After this the bootloader error has gone but I am still not able to boot to ubuntu as I get the same error I was getting before. I have not installed dmraid, I feel it is neccessary for Raid0, but I thought ubuntu already has Raid drivers. Moreover in the dmraid installation instructions for 12.04, I used the one for 10.04 and selected to install bootloader at the partitions from the dropdown. This time the installation finished normally without an error but still I am not able to boot my system as the same error shows during booting this time also. Now I am stucked and I have no clue on how I can boot my system. Please tell me how can I boot my system.

  Read the article

• How do you administer cups remotely using the web interface?

  - by Evan

  I have an Ubuntu server in my apartment and I just got a printer, so it's time to share! In the past I've used CUPS on my Desktop and I'd just point the browsers to localhost:631 to set things up. Can I used the web based admin tools remotely? I've been playing with the /etc/cups/cupsd.conf file and am currently at the point where I can direct a browser on my LAN to server-ip:631 but I'm getting the 403 Forbidden error. If it's not possible or it's a bad idea for security reasons to allow remote administrator of CUPS, would it be possible to accomplish this using an SSH tunnel to the sever?

  Read the article

• Making a bash script that reconnect to AP when connection lost

  - by Alexander

  I'm facing problems with WIFI on ubuntu i tried to update the system but still the same what happens is that i suddenly lose the connection with my router and when i press on the WIFI bar the system won't detect any APs i have to uncheck "enable WIFI" option ,then re check it so it work,it automatically reconnect. I'm thinking of making a bash script that detects when the pc is disconnected from the router for any reason, and when it is disconnected it disable then enable the wifi. i mean like automating resetting the connection that possible ? i guess i must use this nmcli nm wifi off nmcli nm wifi on but how can i make the script know if the PC is disconnected from the WIFI ?

  Read the article

• Mount external hdd in fluxbox ubuntu -12.04 commandline install

  - by jeroen

  I did the following: Install command line interface with ubuntu alternate install 12.04 in vmwareplayer5(9.2.2) After the base system was installed: sudo apt-get update, upgrade and dist-upgrade, sudo apt-get install xinit xorg fluxbox build-essential lxterminal gksu leafpad pcmanfm mc chromium-browser, this works. I also installed vmwaretools. My problem is being unable to mount any usb hdd or thumb drives. I'm new at building fluxbox so any help would be much appreciated!

  Read the article

• Black screen on login, can get thru decrypt disk and access command line but no GUI

  - by t3lf3c

  Running 12.04 64 bit fresh alternative install, with disk crypto on a new Lenovo laptop Install didn't connect and install modules, even though I had the network cable plugged in and don't have any whacky proxy settings. I had to manually install ubunut-desktop and define sources after initial installation, so this seemed a bit weird (ISO matched MD5 sum though) I unplug the network cable, otherwise I get a black screen that I can do nothing with. So I turn laptop on, I have disk encryption, I type in the password at the Ubuntu decryption GUI then get "set up successfully" message "Waiting for network configuration ..." then "Waiting for up to 60 more seconds for network configuration" At this stage (a) If I wait for it then I get a black screen that I can do nothing with. (b) If I interrupt the process by pressing escape, then I break through to the command line. From the command line, I can go ahead and login, then plug my network cable in to do apt-get commands. As a precaution I do some house keeping which takes a few mins to run: sudo apt-get update sudo apt-get upgrade Running startx to get to the GUI gives: Fatal server errror: no screens found The .Xauthority file is being created in my home directory but it's empty. I review my order and note the system graphics: Intel HD Graphics (WWAN or mSATA capable) So it's weird that I can't get to the Gnome. It looks like drivers aren't working. Is there a way of getting Intel drivers from the command line? Or do you have any other suggestions on what to try next?

  Read the article

• When will UDS sponsorship final list be announced?

  - by Manish Sinha

  UDS-O is being held at Budapest, Hungary and the sponsorships are open which closes on 28th of March. My question is when will the final list be announced? Will there be more than one month period for people to apply for Visa? e.g. I live in India and when we apply for Schengen Visa for the first time, it takes around 2 weeks for the visa interview(period depends on the rush). Then another week for interview and Visa to be stamped. AFAIK the application, interview and collection has to be done in person. This is all what I have heard. So will Canonical give one month time minimum for people in Eastern part of the world or countries where Schengen countries have tougher rules for visa? It would be great if they could finalize the names a bit faster and announce the list by first week of April. I am hoping Jorge or Jono might come and answer this.

  Read the article

• BlueTooth not working on my HP Probook 4720s

  - by mtrento

  the blue tooth on my ubuntu 11.10 does not work. When i try to ad a device it scans indefinitely and never find anything. Wireless is working perfeclty and with windows 7 it is detected. As i read somewhere , the bluetooth is not listed in the usb devices. Is it supported under ubuntu? here are the output of the various debug command i tested : hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: E0:2A:82:7A:8B:04 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:1895 acl:0 sco:0 events:70 errors:0 TX bytes:1986 acl:0 sco:0 commands:64 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'PC543host-0' Class: 0x5a0100 Service Classes: Networking, Capturing, Object Transfer, Telephony Device Class: Computer, Uncategorized HCI Version: 2.1 (0x4) Revision: 0x149c LMP Version: 2.1 (0x4) Subversion: 0x149c Manufacturer: Cambridge Silicon Radio (10) hcitool scan hcitool scan Scanning ... lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1ac Chicony Electronics Co., Ltd Bus 002 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse Bus 002 Device 004: ID 148f:1000 Ralink Technology, Corp. lsmod | grep -i bluetooth bluetooth 166112 23 bnep,rfcomm,btusb dmesg | grep -i bluetooth [ 18.543947] Bluetooth: Core ver 2.16 [ 18.544017] Bluetooth: HCI device and connection manager initialized [ 18.544020] Bluetooth: HCI socket layer initialized [ 18.544021] Bluetooth: L2CAP socket layer initialized [ 18.545469] Bluetooth: SCO socket layer initialized [ 18.548890] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 30.204776] Bluetooth: RFCOMM TTY layer initialized [ 30.204782] Bluetooth: RFCOMM socket layer initialized [ 30.204784] Bluetooth: RFCOMM ver 1.11 [ 30.247291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.247295] Bluetooth: BNEP filters: protocol multicast lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 44:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe 45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

  Read the article

• Lancement du nom de domaine .42 par des militants de l'open-source, un projet soutenu par Tristan Nitot mais critiqué par d'autres

  .42 : lancement du premier domaine de premier niveau non-officiel Exemple de fermeture ou première brique d'un internet ouvert ? 42, la réponse universelle à la grande question sur la vie, l'univers et tout le reste est désormais plus qu'une référence de geek. C'est aussi une extension de domaine au même titre que les .com, .fr et autres .org. Plusieurs militants français du logiciel libre (dont Tristan Nitot, président et fondateur de Mozilla Europe) viennent en effet de lancer une initiative audacieuse, celle de tenir tête à l'ICANN, l'organisme américain qui contrôle les serveurs DNS racine (dont la neutralité est remise en cause par certains avec

  Read the article

• How to use IBM T42 laptop's built-in Bluetooth?

  - by B. Roland

  Hello! I have an IBM ThinkPad T42 laptop, and I have some troubles with built-in bluetooth, because in Hardware Drivers, there are no drivers for it, and in Bluetooth settings, it shows, that it has no BT devices. If I plug in an USB Bluetooth adapter, I can use easily Wammu for my mobile backup. I have no setting in BIOS, to enable, or disable it(if disable wireless refers to Wi-fi, but it is enabled too). Some outputs, what the community asked from me, in the IRC: $ sudo hcitool dev Devices: $ $ cat /proc/acpi/ibm/bluetooth No file or dir $ $ sudo modprobe bluetooth $ $ rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ But they couldn't solve my problems. What can I do?

  Read the article

• How to remove keyboard icon from keyboard layout indicator (to leave just the language abbr. alone)?

  - by Ivan

  I'd like to remove a keyboard icon, so replacing "[###] USA" as keyboard layout indicator to just "En", an English or American flag, or "USA" at least. How can I achieve this? UPDATE: When I've clicked to remove e-mail icon from the bar, keyboard language indication has disappeared also, and now I only see that useless keyboard icon, and don't see what language is selected now :-( I use Ubuntu 10.10.

  Read the article

• Create Windows Bootloader/Boot into Windows from Ubuntu

  - by Kincaid

  I have computer that dual-boots (or tri-boots) Windows 8 Release Preview, Windows 7, and Ubuntu 12.04. Grub boots between Windows 8 and Ubuntu; for which I use primarily. Recently, I have decided I wanted to remove Ubuntu, as I hardly used it. As a stupid mistake, I deleted the Ubuntu partition before changing the bootloader to replace Grub. Whenever I know boot the machine, it gives me the "grub-rescue" prompt -- I am unable to boot into either Windows (8 nor 7), nor Ubuntu (except via USB, of course). I do not have any Windows 7/8 recovery media, so that isn't an option. Please note that after I deleted the Ubuntu partition, I put the PC into hibernate, and then turned it on. This means the C:\ [Windows 8] drive cannot be mounted. I don't know if that is bad, but it definitely doesn't make things better. I am currently booting Ubuntu via USB, in an effort to restore the Windows bootloader solutions. I have looked into using boot-repair to solve the problem using the instructions here, although after attempting to apply the changes, it gave the error: "Please install the [mbr] packages. Then try again." I don't know why I'm getting this error; is there a way to install the 'mbr packages?' I honestly don't know what exactly they are, nor how to install them. Is there any options I have not yet exhausted to be able to boot back into Windows, in the case that there is a better way? In the end, I want to set the bootloader to boot into Windows 8, but booting into either Windows 7 or 8 is fine -- I can use EasyBCD from there. Is there a simple solution to this? I've checked BIOS, and I haven't been able to find a way to boot into Windows. Any help would be greatly appreciated.

  Read the article

• apt-get error, cannot install many packages?

  - by tech

  How do I fix this? It shows an error, and I don't know how to fix it. I want to install crossover. Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... failed. The following packages have unmet dependencies: crossover:i386 : Depends: libc6:i386 (>= 2.3) but it is not installed Depends: libice6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libsm6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libx11-6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libxext6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libfreetype6:i386 but it is not installed Depends: libz1:i386 Depends: perl5-base:i386 Depends: perl-modules:i386 but it is not installable Depends: python:i386 (>= 2.4) but it is not installed Depends: python-gtk2:i386 but it is not installed Depends: python-glade2:i386 but it is not installed Depends: desktop-file-utils:i386 but it is not installed Depends: libasound2:i386 but it is not installed Depends: libgl1:i386 Depends: libxrandr2:i386 but it is not installed E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. E: Unable to correct dependencies EDIT I have another recent error. You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: crossover:i386 : Depends: libc6:i386 (= 2.3) but it is not installed Depends: libice6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libsm6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libx11-6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libxext6:i386 but it is not installed or xlibs:i386 but it is not installable Depends: libfreetype6:i386 but it is not installed Depends: libz1:i386 Depends: perl5-base:i386 Depends: perl-modules:i386 but it is not installable Depends: python:i386 (= 2.4) but it is not installed Depends: python-gtk2:i386 but it is not installed Depends: python-glade2:i386 but it is not installed Depends: desktop-file-utils:i386 but it is not installed Depends: libasound2:i386 but it is not installed Depends: libgl1:i386 Depends: libxrandr2:i386 but it is not installed E: Unmet dependencies. Try using -f. running " apt-get -f install " gives me the same error everytime.

  Read the article

• How to Dual Boot Windows 7 x64 and Ubuntu 13.04 x64 as BIOS, not EFI

  - by Dizeke

  I want to dual boot windows 7 x64 and ubuntu 13.04 x64, but when I installed it, it doesn't boot. Only windows was booting. I installed ubuntu with " / " 50GB and a "swap" partition 4GB. Could it be that it doesn't work because I'm on bios mode, and that my disk is MBR, not GPT. My laptop doesn't have an option to change boot mode to UEFI so as much as possible, I'd stick to MBR :( Acer Aspire 4755G Intel i5-2450M 2.5Ghz-3.1Ghz Nvidia GeForce GT540M 2GB 4GB RAM DDR3

  Read the article

• Window borders missing - gtk-window-decorator segmentation fault

  - by Balakrshnan Ramakrishnan

  I have been using Ubuntu for about 1 year now and I got a problem just two days ago. Suddenly I started experiencing a problem with the window borders (title bar with close, maximize, and minimize buttons). The problem : The window borders disappear I run "gtk-window-decorator --replace" For like 20 seconds everything is back to normal But it again returns to the problem. I searched over the Internet and found that my problem is similar to what is specified in this bug report: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/814091 This bug report says that the "fix released". I updated everything using the Update Manager, but still the problem remains. Can anyone let me know whether the problem is fixed? If yes, can you please let me know how to do it? I have already tried normal replace/reset commands like unity --reset unity --replace compiz --replace The "window borders" plugin is on in CCSM (CompizConfig Settings Manager) and it points to "gtk-window-decorator". I use Ubuntu 11.10 on an Intel Core2Duo T6500 with AMD Mobility Radeon HD 4300 graphics card. If you need more information, please let me know.

  Read the article

• Ubuntu 12.04 64 bit doesn't work on a win7 with check point full disk encryption

  - by Victor Rodriguez

  I installed Ubuntu 12.04 64 bit with the Wubi installer on a Windows 7 with Check Point Full Disk Encryption. The Wubi Installer runs without any trouble selecting the compatibility mode with WinXP and as Administrator. The problem is that after the installation is complete and the reboot done, when you restart the system, there's no option to start Ubuntu instead of Windows. I recently installed Ubuntu on other Win7 machines without any problem. But those laptops don't have the Check Point Full Disk Encryption. And when you restart the system you have the option to start in Ubuntu. If somebody has resolved this issue please share...!!! Regards! Víctor

  Read the article

• Read Only usb stick that won't let me do anything to it

  - by Jonathon

  Somehow I messed up and accidentally made my usb stick into a read only file system. I have tried a bunch of things to delete the files, including the basic (rm -f myfile) and attempting to allow writing (sudo chmod +w myfile) and then deleting, but none of this seems to work. Any ideas on what I can do. I don't have anything on the usb stick that I need, but I don't want to throw away an otherwise perfectly good piece of equipment. How can I make it work? Am I going about this completely the wrong way?

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >