Search Results

Search found 30311 results on 1213 pages for 'dont ask ubun'.

Page 132/1213 | < Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >

• SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

  - by digby280

  I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Ubuntu 10.10 Netbook Remix on Asus Eee PC 701 4G - boot process hangs up

  - by Andrew

  I've got an old Eee PC 701 4G with the following specifications: 512 MB RAM 4GB SSD drive SM223AC 8GB SD card extension Screen resolution: 800 x 480 BIOS Revision 1101 (05/16/2008) EC Firmware version: EPC-079 Windows XP SP3 works fine on it, but I decided to switch my OS to Ubuntu. I have downloaded an Ubuntu 10.10 Netbook Remix ISO and wrote it to my FAT32 SD card using Universal-USB-Installer-1.8.3.3, as described on ubuntu.com During standard load from the SD card the boot process hangs up with black screen. If I'll press F6 while preloading Ubuntu, it sucessfully displays the boot menu, selecting language and showing 2 main commands: "Run ubuntu from USB drive" and "Insall Ubuntu". Selecting either of these commands leading to the same result - after some background work the main loading indicator is displayed ("Ubuntu" text with dotted progress bar under it), and it's progressing forever without any effect. Is Ubuntu 10.10 compatible with my Eee PC at all? How to boot it correctly?

  Read the article

• Ubuntu: The Movie

  - by CYREX

  Since Ubuntu is the most popular distribution and has made a lot of changes in many places around the globe and in different industries up to the point where even people that do not know what Linux is, they know what Ubuntu is (go figure? ) there might be a movie coming someday (like the social network for Facebook or Revolution OS for Linux/Red Hat) i wanted to know how it all came to be from the actual players in the show. UBUNTU: The Movie Since i have seen several of the primary characters of the movie here, this might be a good place to start on how it all came to be. Not in the traditional wikipedia way or the ubuntu help section, but in the what the actual developers have in mind on how it all went down to the point of having a huge amount of users, an incredible level sophistication in the forum, help sections, installers, etc.. This is just to have the KNOW HOW before the actual movie makes it out some day in the future. As a fan of Ubuntu this is a MOST KNOW! ;) Hope i made some people happy and some other shy hehe.

  Read the article

• Eclipse has multiple issues after JRE-6 (OpenJDK) upgrade

  - by Eusebius

  I'm on 12.04 LTS, and trying to use Eclipse Indigo. This morning Ubuntu made me update the following packages: Preparing to replace icedtea-6-jre-cacao 6b24-1.11.3-1ubuntu0.12.04.1 (using .../icedtea-6-jre-cacao_6b24-1.11.4-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement icedtea-6-jre-cacao ... Preparing to replace openjdk-6-jre-lib 6b24-1.11.3-1ubuntu0.12.04.1 (using .../openjdk-6-jre-lib_6b24-1.11.4-1ubuntu0.12.04.1_all.deb) ... Unpacking replacement openjdk-6-jre-lib ... Preparing to replace icedtea-6-jre-jamvm 6b24-1.11.3-1ubuntu0.12.04.1 (using .../icedtea-6-jre-jamvm_6b24-1.11.4-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement icedtea-6-jre-jamvm ... Preparing to replace openjdk-6-jre-headless 6b24-1.11.3-1ubuntu0.12.04.1 (using .../openjdk-6-jre-headless_6b24-1.11.4-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-6-jre-headless ... Preparing to replace openjdk-6-jre 6b24-1.11.3-1ubuntu0.12.04.1 (using .../openjdk-6-jre_6b24-1.11.4-1ubuntu0.12.04.1_amd64.deb) ... Unpacking replacement openjdk-6-jre ... After that (but I cannot swear it is the root cause), I have the following issues in Eclipse: When trying to launch the simplest HelloWorld program (which behaves fine with manual javac/java), I get either nothing or: An internal error occurred during: "Launching HelloWorld". org/eclipse/jdt/debug/core/JDIDebugModel I get an "Error log" tab in the console panel, with an error: Could not create the view: An unexpected exception was thrown. (Follows a consequent NullPointerException stacktrace between sun.util.calendar.ZoneInfoFile.getZoneIDs(ZoneInfoFile.java:785) and org.eclipse.equinox.launcher.Main.main(Main.java:1386)) When trying to access the Installed JREs part of the preferences, I get a popup saying: Unable to create the selected preference page. An error occurred while automatically activating bundle org.eclipse.jdt.debug.ui (162). And the preference tab says An error has occurred when creating this preference page. Until today I had a manually installed Eclipse (one of the official bundles available on their site), I've tried to replace it by the repository version and I get the same errors. What should I do to make Eclipse work again? Another person reports: Same happened to me after updating last night. Already tried reinstalling Eclipse and Java, starting Eclipse with -clean and starting new workspace and new .eclipse dir, but nothing helps.

  Read the article

• Black screen after grub kernal selection menu

  - by skip

  I have an Acer eMachines e727 with Intel GMA 4500M integrated graphics (drivers updated to latest). I installed Ubuntu 12.04 using Wubi. All is well until I select the kernal (first one on the list). My display goes black. I searched for solutions and found one on Unbuntu forum which partially helped. Following that sticky post, I pressed "e" at the kernal listings. I changed the $Linux... default line to "quiet splash nomodeset" and was able to get to the login screen and desktop. I edited grub to make the nomodeset permanent (also removed the vt command as recommended). I followed through with changing grub to match the graphics as recommended in the article using the grub cli (using info from vbeinfo). I updated grub with the recommended settings but still get the black screen after selecting the kernal. Only nomodeset works to get me to the login and desktop. Once I get to the desktop, my display resolution shows being set to 1024x768 but it actually looks like 800x680. What do I need to do to get past these issues? Thanks!

  Read the article

• How to connect nokia lumis 520 to ubuntu 12.04

  - by pavankumar

  i have done following steps sudo add-apt-repository ppa:langdalepl/gvfs-mtp sudo apt-get update and updated some upgrades from update manager after doing above steps i am able to see lumia phone name in file system.But when i try to mount device i am getting following errors Unable to mount RM-914|Nokia Lumia 520 Unable to open MTP device '[usb:001,010]' is there any way to solve these problem?

  Read the article

• How can unity-panel-service be disabled?

  - by Amos Annoy

  From the unity-panel-service manpages: DESCRIPTION The unity-panel-service program is normally started automatically by the Unity shell (which gets started as a compiz module) and is used to draw panels which can then be used for the global menu, or to hold indicators. How can the unity-panel-service be non-automatically started abnormally? In other words, how is it arbitrarily manually started and/or stopped? The manpage implication is that this can be done without stopping the Unity shell. This answer seems promising: Is it possible to restart the unity panel without restarting compiz? but ... not. The process can be killed from System Monitor but it restarts automatically. references: How can menu bars that require a right click be activated like Ubuntu versions <10.10? How do I disable the global application menu?

  Read the article

• Black Screen on boot on a Lenovo IdeaPad Z575

  - by Davis

  So I tried to install Wubi. On boot, when I select Ubuntu it starts then I get a purple screen then black screen. My monitor is like completely off. So then I have to hold down my power button and shut it off. I boot it up then held shift and typed in "nomodeset" after the second to last line, but then when it boot it went into the command prompt thing and just stopped after "checking battery" or something. This is my first time installing any linux distro. I want to install it alongside windows and dual boot it with wubi because that is easy and simple. This is the laptop I have: http://www.newegg.com/Product/Product.aspx?Item=N82E16834246328

  Read the article

• Where is my Ubuntu One ribbon?

  - by Roland Taylor

  I'm not seeing the Ubuntu One ribbon in Nautilus-Elementary. I have the nautilus-terminal extension as well, so I don't know if they don't work together. I tried running nautilus from the terminal (for a separate issue), and I think I might be onto something. It seems the Ubuntu One ribbon is not finding something (it had an exception). I got the NE-Terminal working again by deleting the gconf directory for Nautilus.

  Read the article

• Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• No desktop icons after upgrade to 11.10

  - by anjanesh

  I just upgraded from 11.04 to 11.10 and after restart it showed the login screen. After login, only the desktop background shows with ubuntu 11.10 text at the bottom-left corner. Did my GNOME stop working ? My mouse pointer moves though, so its not a system crash. These are my h/w specs : Ubuntu 11.04 x86_64 • Intel Core 2 Quad Q6600 2.4GHz 8MB cache 1066MHz Intel MoBo DG33 8GB DDR2 RAM @ 800MHz • 1GB 8600 GT nVidia Graphics Card • Dell SP2309W • LG Flatron L222WS

  Read the article

• This update does not come from a source that supports changelogs

  - by blade19899

  When I get an update via update-manager for a software like blender/vlc, I like to see what has been fixed/changed. I added the ppa for blender/vlc (this only applies to the software I added a ppa for) sudo add-apt-repository ppa:cheleb/blender-svn sudo apt-get update sudo apt-get install blender And vlc like this. sudo add-apt-repository ppa:videolan/stable-daily sudo apt-get update sudo apt-get install vlc And when i run update-manager, or update manager pop-ups I see that vlc/blender have updates but, I can't see what has been changed/fixed this is the message I get, the screenshot below is for mupen but it's the same thing. (I updated vlc and blender, didn't wanna wait for the next update) This update does not come from a source that supports changelogs. (by the way I have a dutch Ubuntu, so the above text i Google translated it!) It only shows which version you have and to which version you be upgrading to. So my question is, how do I get the change-log tab of update-manager working. if it's even possible?

  Read the article

• A problem with conky in Gnome 3.4 [closed]

  - by Pranit Bauva

  Possible Duplicate: Conky not working in Gnome 3.4 My conky in Gnome 3.4 is not working. When I run a conky script nothing appears but the process is running. Please also see the debug code : pungi-man@pungi-man:~$ sh conky_startup.sh Conky: forked to background, pid is 3157 Conky: desktop window (c00023) is subwindow of root window (aa) Conky: window type - override Conky: drawing to created window (0x2200001) Conky: drawing to double buffer My conky script is : background yes update_interval 1 cpu_avg_samples 2 net_avg_samples 2 temperature_unit celsius double_buffer yes no_buffers yes text_buffer_size 2048 gap_x 10 gap_y 30 minimum_size 190 450 maximum_width 190 own_window yes own_window_type override own_window_transparent yes own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below border_inner_margin 0 border_outer_margin 0 alignment tr draw_shades no draw_outline no draw_borders no draw_graph_borders no override_utf8_locale yes use_xft yes xftfont caviar dreams:size=8 xftalpha 0.5 uppercase no default_color FFFFFF color1 DDDDDD color2 AAAAAA color3 888888 color4 666666 lua_load /home/pungi-man/.conky/conky_grey.lua lua_draw_hook_post main TEXT ${voffset 35} ${goto 95}${color4}${font ubuntu:size=22}${time %e}${color1}${offset -50}${font ubuntu:size=10}${time %A} ${goto 85}${color2}${voffset -2}${font ubuntu:size=9}${time %b}${voffset -2} ${color3}${font ubuntu:size=12}${time %Y}${font} ${voffset 80} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}CPU ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${top name 1}${alignr}${top cpu 1}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color2}${top name 2}${alignr}${top cpu 2}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color3}${top name 3}${alignr}${top cpu 3}% ${goto 90}${cpugraph 10,100 666666 666666} ${goto 90}${voffset -10}${font Ubuntu:size=7,weight:normal}${color}${threads} process ${voffset 20} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}MEM ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${top_mem name 1} ${alignr}${top_mem mem 1}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color2}${top_mem name 2} ${alignr}${top_mem mem 2}% ${goto 90}${font Ubuntu:size=7,weight:normal}${color3}${top_mem name 3} ${alignr}${top_mem mem 3}% ${voffset 15} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}DISKS ${goto 90}${diskiograph 30,100 666666 666666}${voffset -30} ${goto 90}${font Ubuntu:size=7,weight:normal}${color}used: ${fs_used /home} /home ${goto 90}${font Ubuntu:size=7,weight:normal}${color}used: ${fs_used /} / ${voffset 10} ${goto 70}${font Ubuntu:size=18,weight:bold}${color3}NET${alignr}${color2}${font Ubuntu:size=7,weight:bold}${color1}${if_up eth0}eth ${addr eth0} ${endif}${if_up wlan0}wifi ${addr wlan0}${endif} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}open ports: ${alignr}${color2}${tcp_portmon 1 65535 count} ${goto 90}${font Ubuntu:size=7,weight:bold}${color}${offset 10}IP${alignr}DPORT ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 0}${alignr 1}${tcp_portmon 1 65535 rport 0} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 1}${alignr 1}${tcp_portmon 1 65535 rport 1} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 2}${alignr 1}${tcp_portmon 1 65535 rport 2} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 3}${alignr 1}${tcp_portmon 1 65535 rport 3} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 4}${alignr 1}${tcp_portmon 1 65535 rport 4} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 5}${alignr 1}${tcp_portmon 1 65535 rport 5} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 6}${alignr 1}${tcp_portmon 1 65535 rport 6} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 7}${alignr 1}${tcp_portmon 1 65535 rport 7} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 8}${alignr 1}${tcp_portmon 1 65535 rport 8} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 9}${alignr 1}${tcp_portmon 1 65535 rport 9} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 10}${alignr 1}${tcp_portmon 1 65535 rport 10} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 11}${alignr 1}${tcp_portmon 1 65535 rport 11} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 12}${alignr 1}${tcp_portmon 1 65535 rport 12} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 13}${alignr 1}${tcp_portmon 1 65535 rport 13} ${goto 90}${font Ubuntu:size=7,weight:normal}${color1}${tcp_portmon 1 65535 rip 14}${alignr 1}${tcp_portmon 1 65535 rport 14} This script works fine with unity but faces problems in gnome 3.4 Can anyone please sort it out?

  Read the article

• How to start a task before networking?

  - by user1252434

  I've written an upstart task that modifies /etc/network/interfaces. (Actually a file sourced into it.) Which start on condition do I need to declare to let my task run before any networking jobs? I've tried start on starting networking, but that's apparently too late. When I log in after booting I can see that the changes were written, but obviously they are not used: the new config states a static IP, but the boot process waits for a non-existing DHCP server (old config) to time out. I've also tried start on starting network-interface INTERFACE=eth0, which didn't work either. IIRC there was an error in the log that the change couldn't be written. Background: I need a VM template that can be cloned and the clones configured through a script. Among other settings, I need to give them a static IP address to access them from the host. I use guestfish to write a config file to one of the virtual disks and let a script apply these settings to the system. I don't want that disk to contain an actual system settings file. I can't modify /etc directly, because that disk is shared (copy-on-write/diff) among the clones and guestfish apparently doesn't support that type of image. I could also let them use DHCP and setup a server that assigns IP by MAC, but I'm afraid of the complexity. I could also add just another virtual disk for configuration files, but if possible I'd prefer to store settings directly on the system disk image. Used software: Ubuntu Server 12.04, VirtualBox. The configuration modifier is a self written ruby script.

  Read the article

• How to repair an external harddrive?

  - by dodohjk

  I would like to reformat my hard disk, and if possible recover the (somewhat unimportant) contents if possible. I have a Western Digital 1TB hard drive which had a NTFS partition. I unplugged the drive without safely removing it first. At first a pop up was asking me to use a Windows OS to run the chkdsk /f command, however, in the effort to keep using a Linux OS I used the ntfsfix command on the ubuntu terminal Now, when I try to access the hard drive, it doesn't show up anymore in Nautilus. I tried reformatting it using Disk Utility, but it gives me an error message, and Gparted would hang on the "Scanning devices" step infinitely. Please comment any output that you would like to see and I will add it to my question. EDIT disk utility tells me is on /dev/sdb the command sudo fdisk -l gives dodohjk@DodosPC:~$ sudo fdisk -l [sudo] password for dodohjk: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006fa8c Device Boot Start End Blocks Id System /dev/sda1 * 4094 482344959 241170433 5 Extended /dev/sda2 482344960 488396799 3025920 82 Linux swap / Solaris /dev/sda5 4096 31461127 15728516 83 Linux /dev/sda6 31463424 52434943 10485760 83 Linux /dev/sda7 52436992 62923320 5243164+ 83 Linux /dev/sda8 62924800 482344959 209710080 83 Linux Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6e697373 This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sdb1 ? 1936269394 3772285809 918008208 4f QNX4.x 3rd part /dev/sdb2 ? 1917848077 2462285169 272218546+ 73 Unknown /dev/sdb3 ? 1818575915 2362751050 272087568 2b Unknown /dev/sdb4 ? 2844524554 2844579527 27487 61 SpeedStor Partition table entries are not in disk order I wrote something wrong here, however here the output of fsck /dev/sbd is dodohjk@DodosPC:~$ sudo fsck /dev/sdb fsck from util-linux 2.20.1 e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device&gt;

  Read the article

• Error while installing GNU Octave packages

  - by carllacan

  I want to install the GNU Octave optim package, but I keep receiving errors in the process. Apparently I need to install some other packages first, one of which is the general package. However, when I try to, I receive this error: octave:17> pkg install general-1.3.2.tar.gz make: /usr/bin/mkoctfile: Command not found make: *** [__exit__.oct] Error 127 'make' returned the following error: make: Entering directory `/tmp/oct-CGIPo9/general/src' /usr/bin/mkoctfile __exit__.cc make: Leaving directory `/tmp/oct-CGIPo9/general/src' error: called from `pkg>configure_make' in file /usr/share/octave/3.6.1/m/pkg/pkg.m near line 1391, column 9 error: called from: error: /usr/share/octave/3.6.1/m/pkg/pkg.m at line 834, column 5 error: /usr/share/octave/3.6.1/m/pkg/pkg.m at line 383, column 9

  Read the article

• Resource Graphs in top panel?

  - by Jeff Welling

  I'm running Gnome Classic in Ubuntu 11.10 and in previous versions of Ubuntu it was fairly easy to get resource graphs to appear in the top menu, but now the regular way of getting said graphs in the top menu bar don't work (right clicking on the top menu produces no result unless you click on an icon, eg sound, wifi, or battery indicators). Is it not possible to get resource graphs in the top menu bar in Gnome Classic on Ubuntu 11.10? If not Gnome Classic, is it possible in KDE? I've tried googling but the only results I'm getting are related to adding the panel, which I can't do because I can't right click on the top menu. Thanks in advance.

  Read the article

• 'Important security update' for Firefox and flash plugin, but the update cannot be selected

  - by geoffrey

  [This question has been updated as I now have the same problem with Firefox in addition to flash plugin] The update manager (on Ubuntu 12.04, 64bit) shows an 'important security update' for flashplugin-installer:i386, firefox, and firefox-globalmenu. The update is unticked, and cannot be selected, and therefore cannot be updated (I can update other packages without problems). Actually the flashplugin-installer package does not appear to be installed on my computer (judging from the Software Centre). I can't remember how I installed flash, probably directly from the Adobe website. The updater asks me if I want to do a partial upgrade. When running sudo apt-get update && sudo apt-get upgrade from terminal, I get the following: The following packages have been kept back: firefox firefox-globalmenu flashplugin-installer:i386

  Read the article

• Chainload boot of Ubuntu installed on 32GB SD card from legacy Grub boot on USB

  - by Gary Darsey

  I have Ubuntu installed on a 32 GB SD card (in the Storage Expansion slot on an Acer Aspire One) with Grub2 installed in the same partition. I boot into legacy Grub on a USB drive and would like to boot by chainloading Grub2 from Grub (kernel/initrd or symlink booting would also be fine), but I haven't figured out how to do this from legacy Grub CLI. Output from blkid for this partition is /dev/mmcblk0p1: LABEL="Ubuntu" UUID="7ceb9fa7-238c-4c5d-bb8e-2c655652ddec" TYPE='ext4" / fdisk -lu information Boot indicator ID 83. Related entries in grub.cfg: search --no-floppy --fs-uuid --set-root 7ceb9fa7-238c-4c5d-bb8e-2c655652ddec linux /boot/vmlinuz-3.5.0-17-generic root=UUID=7ceb9fa7-238c-4c5d-bb8e-2c655652ddec... initrd /boot/initrd.img-3.5.0-17-generic I can't seem to replicate this in legacy Grub. Is there any way get Grub2 to chainload? How do I set root with UUID in legacy Grub? I prefer to boot from USB. Would Grub2 on USB (copying the grub.cfg generated during installation) be an option?

  Read the article

• Desktop keyboard behaves like laptop keyboard when numlock is on

  - by lstone

  I have fully updated ubuntu 12.04 installed on my desktop. The problem is when I turn on NumLock, the keyboard behaves like a laptop keyboard making the keys "mjkluio789" correspond to "0-9". I've had a laptop where such behavior was expected due to absence of a separate numpad. I'm using an iBall USB keyboard and it has a numpad section unlike laptop keyboards(http://iball.co.in/Product.aspx?c=2).

  Read the article

• Is gstreamer the best encoder for vorbis or is there a better encoding engine I should use?

  - by sayth

  I have sound juicer installed and I want to rip to vorbis.ogg. Is gstreamer the best encoder for vorbis or is there a better encoding engine I should use. The default gstreamer profile is audio/x-raw-float,rate=44100,channels=2 ! vorbisenc name=enc quality=0.5 ! oggmux I am going to raise the quality to 0.7 but thats all nothing if gstreamer isn't the best encoder. Any suggestions for high quality ripping? Edit: a good answer to this will also be the top search result in google for "best vorbis encoding engine". Double Edit: It appears oggenc itself is the best encoder which rules out using sound juicer to rip cd's as it uses gstreamer. I have installed oggenc and am testing the command ripper abcde. Found a good configuration for it here oggenc config for abcde

  Read the article

• How to install OpenCV without nVidia drivers

  - by Subhamoy Sengupta

  I have a laptop with on-board Intel graphics. I have been using OpenCV for years with this machine and I have managed to avoid manual compilation so far. But in Ubuntu 13.10, when I try to install libopencv-dev from the repositories, it brings along libopencv-ocl, which seems to be dependent on nvidia drivers. Letting the driver install messes up my xserver completely and when I do glxinfo afterwards, I get this: name of display: :0.0 Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". To solve this, I purge all nVidia drivers and reinstall xserver, much like it has been suggested here, and when I purge the nvidia drivers, OpenCV development libraries are also removed, as apt-get tells me they are no longer needed. This is foreign to me, because I expected a warning that I have installed packages that depend on this, but how can removing a dependency automatically remove the package I installed without warnings or asking? I understand it has something to do with nVidia being the provider of the libopencv-ocl in the repo. How could I get around it? I would rather not compile OpenCV if I can help it. I have seen similar questions, but not a suitable answer.

  Read the article

• Strange display language in gnome shell

  - by khalafuf

  I logged in gnome-shell, and found that the display language is set to some strange asian language (I think) without my prompt. I tried to change the locale settings but found that the default language is English (how?) despite of that strange language. Here's a snapshot, See the strange word instead of "Activity": I'm on Ubuntu 12.04 LTS. Output of locale: LANG=zh_CN.UTF-8 LANGUAGE=zh_CN:en_US:en LC_CTYPE="zh_CN.UTF-8" LC_NUMERIC=en_US.UTF-8 LC_TIME=en_US.UTF-8 LC_COLLATE="zh_CN.UTF-8" LC_MONETARY=en_US.UTF-8 LC_MESSAGES="zh_CN.UTF-8" LC_PAPER=en_US.UTF-8 LC_NAME=en_US.UTF-8 LC_ADDRESS=en_US.UTF-8 LC_TELEPHONE=en_US.UTF-8 LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=en_US.UTF-8 LC_ALL= Output of locale -a: C C.UTF-8 de_CH.utf8 en_AG en_AG.utf8 en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_IE.utf8 en_IN en_IN.utf8 en_NG en_NG.utf8 en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZM en_ZM.utf8 en_ZW.utf8 POSIX zh_CN.utf8 zh_SG.utf8 Solved: This answer did it.

  Read the article

• Wine 1.2 crash after I start Mega 5.0

  - by Tomáš Šíma

  I installed Mega 5.0 by running "sudo sh MEGA5_Setup_deb_v2.sh" The application downloaded wine 1.2 as mega requires in order to work under Ubuntu. However every time I start the application through the icon provided, wine crashes asking me to send/save bug report, the problem is that if I choose to do so, megas starting window pops up covering the bug report window leaving me unable to do anything (as it won't move) The only solution I have come up with is to log out and log back in, as I cancels wine. I beg you following: Please post detailed step by step instructions how to deal with said problem Tell me if forceful log out, can damage computer of any of my data Please forgive me my weak English as it is not my native language. Also forgive me my weak skills concerning Ubuntu usage as I have me forced to switch to Ubuntu this very day. Thank you.

  Read the article

• Problem on login: Freeze just before user selection

  - by Diego Garcia

  Hi, I'm using ubuntu 10.10 and when I login it shows my login's wallpaper an appears the window where I select my user without showing it and then gets frozen. No mouse response, no keyboard responde (even if I try to num/caps lock). I tried with safe mode and same thing happens, but in that case it freeze when trying to load some USB stuff, I tought it was my USB headset or my mouse so I disconnected them but doesn't works. Any advice on how to fix this, how to login to try an update or how to post more information?

  Read the article

< Previous Page | 128 129 130 131 132 133 134 135 136 137 138 139  | Next Page >