Search Results

Search found 3147 results on 126 pages for 'drupal alter'.

Page 126/126 | < Previous Page | 122 123 124 125 126 

  • How do I name an array key with a key inside the array

    - by Confused
    I have some data, yes, data. This data came from a MySQL query and it will always contain 4 items, always. I want to cache that data in an array table for use later within a web page but I want to keep the keys from the query and separate out each grouping within a multidimensional array. However to save time iterating through the array each time I want to find a given group of data, I want to call the keys of the first array the same as the ID key which is always the first key within each four items. At the minute I'm using this code: function mysql_fetch_full_result_array($result) { $table_result=array(); $r=0; while($row = mysql_fetch_assoc($result)){ $arr_row=array(); $c=0; while ($c < mysql_num_fields($result)) { $col = mysql_fetch_field($result, $c); $arr_row[$col -> name] = $row[$col -> name]; $c++; } $table_result[$r] = $arr_row; $r++; } return $table_result; } I'm currently testing this using 3 unique users, so I'm getting three rows back from the query and the data from this function ends up in the format: [0]=> . . [id] => 1 . . [name] => random name . . [tel] => random tel . . [post] => post code data [1]=> . . [id] => 34 . . [name] => random name . . [tel] => random tel . . [post] => post code data [2]=> . . [id] => 56 . . [name] => random name . . [tel] => random tel . . [post] => post code data So how do I alter the code to instead of the keys [0], [1], [2] give me the output: [1]=> . . [id] => 1 . . [name] => random name . . [tel] => random tel . . [post] => post code data [34]=> . . [id] => 34 . . [name] => random name . . [tel] => random tel . . [post] => post code data [56]=> . . [id] => 56 . . [name] => random name . . [tel] => random tel . . [post] => post code data I don't mind if the main array keys are strings of numbers rather than numbers but I'm a bit stuck, I tried changing the $table_result[$r] = $arr_row; part to read $table_result[$result['id']] = $arr_row; but that just outputs an array of one person. I know I need another loop but I'm struggling to work out how to write it.

    Read the article

  • 1136: Incorrect number of arguments. Expected 0.? AS3 Flash Cs4 (Round 2)

    - by charmaine
    (I have asked this before but I dont think I was direct enough with my question and therefore it did not get resolved so here goes again!) I am working through a book called Foundation Actionscript 3.0 Animation, making things move. I am now on Chapter 9 - Collision Detection. On two lines of my code I get the 1135 error, letting me know that I have an incorrect number of arguments. I have highlighted the two areas in which this occurs with asterisks: package { import flash.display.Sprite; import flash.events.Event; public class Bubbles extends Sprite { private var balls:Array; private var numBalls:Number = 10; private var centerBall:Ball; private var bounce:Number = -1; private var spring:Number = 0.2; public function Bubbles() { init(); } private function init():void { balls = new Array(); ***centerBall = new Ball(100, 0xcccccc);*** addChild(centerBall); centerBall.x = stage.stageWidth / 2; centerBall.y = stage.stageHeight / 2; for(var i:uint = 0; i < numBalls; i++) { ***var ball:Ball = new Ball(Math.random() * 40 + 5, Math.random() * 0xffffff);*** ball.x = Math.random() * stage.stageWidth; ball.y = Math.random() * stage.stageHeight; ball.vx = Math.random() * 6 - 3; ball.vy = Math.random() * 6 - 3; addChild(ball); balls.push(ball); } addEventListener(Event.ENTER_FRAME, onEnterFrame); } private function onEnterFrame(event:Event):void { for(var i:uint = 0; i < numBalls; i++) { var ball:Ball = balls[i]; move(ball); var dx:Number = ball.x - centerBall.x; var dy:Number = ball.y - centerBall.y; var dist:Number = Math.sqrt(dx * dx + dy * dy); var minDist:Number = ball.radius + centerBall.radius; if(dist < minDist) { var angle:Number = Math.atan2(dy, dx); var tx:Number = centerBall.x + Math.cos(angle) * minDist; var ty:Number = centerBall.y + Math.sin(angle) * minDist; ball.vx += (tx - ball.x) * spring; ball.vy += (ty - ball.y) * spring; } } } private function move(ball:Ball):void { ball.x += ball.vx; ball.y += ball.vy; if(ball.x + ball.radius > stage.stageWidth) { ball.x = stage.stageWidth - ball.radius; ball.vx *= bounce; } else if(ball.x - ball.radius < 0) { ball.x = ball.radius; ball.vx *= bounce; } if(ball.y + ball.radius > stage.stageHeight) { ball.y = stage.stageHeight - ball.radius; ball.vy *= bounce; } else if(ball.y - ball.radius < 0) { ball.y = ball.radius; ball.vy *= bounce; } } } } I think this is due to the non-existance of a Ball.as, when reading the tutorial I assumed it meant that I had to create a movie clip of a ball on stage and then export it for actionscript with the class name being Ball, however when flicking back through the book I saw that a Ball.as already existed, stating that I may need to use this again later on in the book, this read: package { import flash.display.Sprite; public class Ball extends Sprite { private var radius:Number; private var color:uint; public var vx:Number=0; public var vy:Number=0; public function Ball(radius:Number=40, color:uint=0xff0000) { this.radius=radius; this.color=color; init(); } public function init():void { graphics.beginFill(color); graphics.drawCircle(0, 0, radius); graphics.endFill(); } } } This managed to stop all the errors appearing however, it did not transmit any of the effects from Bubbles.as it just braught a Red Ball on the center of the stage. How would I alter this code in order to work in favour of Bubbles.as? Please Help! Thanks!

    Read the article

  • Databinding in combo box

    - by muralekarthick
    Hi I have two forms, and a class, queries return in Stored procedure. Stored Procedure: ALTER PROCEDURE [dbo].[Payment_Join] @reference nvarchar(20) AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; -- Insert statements for procedure here SELECT p.iPaymentID,p.nvReference,pt.nvPaymentType,p.iAmount,m.nvMethod,u.nvUsers,p.tUpdateTime FROM Payment p, tblPaymentType pt, tblPaymentMethod m, tblUsers u WHERE p.nvReference = @reference and p.iPaymentTypeID = pt.iPaymentTypeID and p.iMethodID = m.iMethodID and p.iUsersID = u.iUsersID END payment.cs using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Data; using System.Data.SqlClient; using System.Windows.Forms; namespace Finance { class payment { string connection = global::Finance.Properties.Settings.Default.PaymentConnectionString; #region Fields int _paymentid = 0; string _reference = string.Empty; string _paymenttype; double _amount = 0; string _paymentmethod; string _employeename; DateTime _updatetime = DateTime.Now; #endregion #region Properties public int paymentid { get { return _paymentid; } set { _paymentid = value; } } public string reference { get { return _reference; } set { _reference = value; } } public string paymenttype { get { return _paymenttype; } set { _paymenttype = value; } } public string paymentmethod { get { return _paymentmethod; } set { _paymentmethod = value; } } public double amount { get { return _amount;} set { _amount = value; } } public string employeename { get { return _employeename; } set { _employeename = value; } } public DateTime updatetime { get { return _updatetime; } set { _updatetime = value; } } #endregion #region Constructor public payment() { } public payment(string refer) { reference = refer; } public payment(int paymentID, string Reference, string Paymenttype, double Amount, string Paymentmethod, string Employeename, DateTime Time) { paymentid = paymentID; reference = Reference; paymenttype = Paymenttype; amount = Amount; paymentmethod = Paymentmethod; employeename = Employeename; updatetime = Time; } #endregion #region Methods public void Save() { try { SqlConnection connect = new SqlConnection(connection); SqlCommand command = new SqlCommand("payment_create", connect); command.CommandType = CommandType.StoredProcedure; command.Parameters.Add(new SqlParameter("@reference", reference)); command.Parameters.Add(new SqlParameter("@paymenttype", paymenttype)); command.Parameters.Add(new SqlParameter("@amount", amount)); command.Parameters.Add(new SqlParameter("@paymentmethod", paymentmethod)); command.Parameters.Add(new SqlParameter("@employeename", employeename)); command.Parameters.Add(new SqlParameter("@updatetime", updatetime)); connect.Open(); command.ExecuteScalar(); connect.Close(); } catch { } } public void Load(string reference) { try { SqlConnection connect = new SqlConnection(connection); SqlCommand command = new SqlCommand("Payment_Join", connect); command.CommandType = CommandType.StoredProcedure; command.Parameters.Add(new SqlParameter("@Reference", reference)); //MessageBox.Show("ref = " + reference); connect.Open(); SqlDataReader reader = command.ExecuteReader(); while (reader.Read()) { this.reference = Convert.ToString(reader["nvReference"]); // MessageBox.Show(reference); // MessageBox.Show("here"); // MessageBox.Show("payment type id = " + reader["nvPaymentType"]); // MessageBox.Show("here1"); this.paymenttype = Convert.ToString(reader["nvPaymentType"]); // MessageBox.Show(paymenttype.ToString()); this.amount = Convert.ToDouble(reader["iAmount"]); this.paymentmethod = Convert.ToString(reader["nvMethod"]); this.employeename = Convert.ToString(reader["nvUsers"]); this.updatetime = Convert.ToDateTime(reader["tUpdateTime"]); } reader.Close(); } catch (Exception ex) { MessageBox.Show("Check it again" + ex); } } #endregion } } i have already binded the combo box items through designer, When i run the application i just get the reference populated in form 2 and combo box just populated not the particular value which is fetched. New to c# so help me to get familiar

    Read the article

  • Announcing release of ASP.NET MVC 3, IIS Express, SQL CE 4, Web Farm Framework, Orchard, WebMatrix

    - by ScottGu
    I’m excited to announce the release today of several products: ASP.NET MVC 3 NuGet IIS Express 7.5 SQL Server Compact Edition 4 Web Deploy and Web Farm Framework 2.0 Orchard 1.0 WebMatrix 1.0 The above products are all free. They build upon the .NET 4 and VS 2010 release, and add a ton of additional value to ASP.NET (both Web Forms and MVC) and the Microsoft Web Server stack. ASP.NET MVC 3 Today we are shipping the final release of ASP.NET MVC 3.  You can download and install ASP.NET MVC 3 here.  The ASP.NET MVC 3 source code (released under an OSI-compliant open source license) can also optionally be downloaded here. ASP.NET MVC 3 is a significant update that brings with it a bunch of great features.  Some of the improvements include: Razor ASP.NET MVC 3 ships with a new view-engine option called “Razor” (in addition to continuing to support/enhance the existing .aspx view engine).  Razor minimizes the number of characters and keystrokes required when writing a view template, and enables a fast, fluid coding workflow. Unlike most template syntaxes, with Razor you do not need to interrupt your coding to explicitly denote the start and end of server blocks within your HTML. The Razor parser is smart enough to infer this from your code. This enables a compact and expressive syntax which is clean, fast and fun to type.  You can learn more about Razor from some of the blog posts I’ve done about it over the last 6 months Introducing Razor New @model keyword in Razor Layouts with Razor Server-Side Comments with Razor Razor’s @: and <text> syntax Implicit and Explicit code nuggets with Razor Layouts and Sections with Razor Today’s release supports full code intellisense support for Razor (both VB and C#) with Visual Studio 2010 and the free Visual Web Developer 2010 Express. JavaScript Improvements ASP.NET MVC 3 enables richer JavaScript scenarios and takes advantage of emerging HTML5 capabilities. The AJAX and Validation helpers in ASP.NET MVC 3 now use an Unobtrusive JavaScript based approach.  Unobtrusive JavaScript avoids injecting inline JavaScript into HTML, and enables cleaner separation of behavior using the new HTML 5 “data-“ attribute convention (which conveniently works on older browsers as well – including IE6). This keeps your HTML tight and clean, and makes it easier to optionally swap out or customize JS libraries.  ASP.NET MVC 3 now includes built-in support for posting JSON-based parameters from client-side JavaScript to action methods on the server.  This makes it easier to exchange data across the client and server, and build rich JavaScript front-ends.  We think this capability will be particularly useful going forward with scenarios involving client templates and data binding (including the jQuery plugins the ASP.NET team recently contributed to the jQuery project).  Previous releases of ASP.NET MVC included the core jQuery library.  ASP.NET MVC 3 also now ships the jQuery Validate plugin (which our validation helpers use for client-side validation scenarios).  We are also now shipping and including jQuery UI by default as well (which provides a rich set of client-side JavaScript UI widgets for you to use within projects). Improved Validation ASP.NET MVC 3 includes a bunch of validation enhancements that make it even easier to work with data. Client-side validation is now enabled by default with ASP.NET MVC 3 (using an onbtrusive javascript implementation).  Today’s release also includes built-in support for Remote Validation - which enables you to annotate a model class with a validation attribute that causes ASP.NET MVC to perform a remote validation call to a server method when validating input on the client. The validation features introduced within .NET 4’s System.ComponentModel.DataAnnotations namespace are now supported by ASP.NET MVC 3.  This includes support for the new IValidatableObject interface – which enables you to perform model-level validation, and allows you to provide validation error messages specific to the state of the overall model, or between two properties within the model.  ASP.NET MVC 3 also supports the improvements made to the ValidationAttribute class in .NET 4.  ValidationAttribute now supports a new IsValid overload that provides more information about the current validation context, such as what object is being validated.  This enables richer scenarios where you can validate the current value based on another property of the model.  We’ve shipped a built-in [Compare] validation attribute  with ASP.NET MVC 3 that uses this support and makes it easy out of the box to compare and validate two property values. You can use any data access API or technology with ASP.NET MVC.  This past year, though, we’ve worked closely with the .NET data team to ensure that the new EF Code First library works really well for ASP.NET MVC applications.  These two posts of mine cover the latest EF Code First preview and demonstrates how to use it with ASP.NET MVC 3 to enable easy editing of data (with end to end client+server validation support).  The final release of EF Code First will ship in the next few weeks. Today we are also publishing the first preview of a new MvcScaffolding project.  It enables you to easily scaffold ASP.NET MVC 3 Controllers and Views, and works great with EF Code-First (and is pluggable to support other data providers).  You can learn more about it – and install it via NuGet today - from Steve Sanderson’s MvcScaffolding blog post. Output Caching Previous releases of ASP.NET MVC supported output caching content at a URL or action-method level. With ASP.NET MVC V3 we are also enabling support for partial page output caching – which allows you to easily output cache regions or fragments of a response as opposed to the entire thing.  This ends up being super useful in a lot of scenarios, and enables you to dramatically reduce the work your application does on the server.  The new partial page output caching support in ASP.NET MVC 3 enables you to easily re-use cached sub-regions/fragments of a page across multiple URLs on a site.  It supports the ability to cache the content either on the web-server, or optionally cache it within a distributed cache server like Windows Server AppFabric or memcached. I’ll post some tutorials on my blog that show how to take advantage of ASP.NET MVC 3’s new output caching support for partial page scenarios in the future. Better Dependency Injection ASP.NET MVC 3 provides better support for applying Dependency Injection (DI) and integrating with Dependency Injection/IOC containers. With ASP.NET MVC 3 you no longer need to author custom ControllerFactory classes in order to enable DI with Controllers.  You can instead just register a Dependency Injection framework with ASP.NET MVC 3 and it will resolve dependencies not only for Controllers, but also for Views, Action Filters, Model Binders, Value Providers, Validation Providers, and Model Metadata Providers that you use within your application. This makes it much easier to cleanly integrate dependency injection within your projects. Other Goodies ASP.NET MVC 3 includes dozens of other nice improvements that help to both reduce the amount of code you write, and make the code you do write cleaner.  Here are just a few examples: Improved New Project dialog that makes it easy to start new ASP.NET MVC 3 projects from templates. Improved Add->View Scaffolding support that enables the generation of even cleaner view templates. New ViewBag property that uses .NET 4’s dynamic support to make it easy to pass late-bound data from Controllers to Views. Global Filters support that allows specifying cross-cutting filter attributes (like [HandleError]) across all Controllers within an app. New [AllowHtml] attribute that allows for more granular request validation when binding form posted data to models. Sessionless controller support that allows fine grained control over whether SessionState is enabled on a Controller. New ActionResult types like HttpNotFoundResult and RedirectPermanent for common HTTP scenarios. New Html.Raw() helper to indicate that output should not be HTML encoded. New Crypto helpers for salting and hashing passwords. And much, much more… Learn More about ASP.NET MVC 3 We will be posting lots of tutorials and samples on the http://asp.net/mvc site in the weeks ahead.  Below are two good ASP.NET MVC 3 tutorials available on the site today: Build your First ASP.NET MVC 3 Application: VB and C# Building the ASP.NET MVC 3 Music Store We’ll post additional ASP.NET MVC 3 tutorials and videos on the http://asp.net/mvc site in the future. Visit it regularly to find new tutorials as they are published. How to Upgrade Existing Projects ASP.NET MVC 3 is compatible with ASP.NET MVC 2 – which means it should be easy to update existing MVC projects to ASP.NET MVC 3.  The new features in ASP.NET MVC 3 build on top of the foundational work we’ve already done with the MVC 1 and MVC 2 releases – which means that the skills, knowledge, libraries, and books you’ve acquired are all directly applicable with the MVC 3 release.  MVC 3 adds new features and capabilities – it doesn’t obsolete existing ones. You can upgrade existing ASP.NET MVC 2 projects by following the manual upgrade steps in the release notes.  Alternatively, you can use this automated ASP.NET MVC 3 upgrade tool to easily update your  existing projects. Localized Builds Today’s ASP.NET MVC 3 release is available in English.  We will be releasing localized versions of ASP.NET MVC 3 (in 9 languages) in a few days.  I’ll blog pointers to the localized downloads once they are available. NuGet Today we are also shipping NuGet – a free, open source, package manager that makes it easy for you to find, install, and use open source libraries in your projects. It works with all .NET project types (including ASP.NET Web Forms, ASP.NET MVC, WPF, WinForms, Silverlight, and Class Libraries).  You can download and install it here. NuGet enables developers who maintain open source projects (for example, .NET projects like Moq, NHibernate, Ninject, StructureMap, NUnit, Windsor, Raven, Elmah, etc) to package up their libraries and register them with an online gallery/catalog that is searchable.  The client-side NuGet tools – which include full Visual Studio integration – make it trivial for any .NET developer who wants to use one of these libraries to easily find and install it within the project they are working on. NuGet handles dependency management between libraries (for example: library1 depends on library2). It also makes it easy to update (and optionally remove) libraries from your projects later. It supports updating web.config files (if a package needs configuration settings). It also allows packages to add PowerShell scripts to a project (for example: scaffold commands). Importantly, NuGet is transparent and clean – and does not install anything at the system level. Instead it is focused on making it easy to manage libraries you use with your projects. Our goal with NuGet is to make it as simple as possible to integrate open source libraries within .NET projects.  NuGet Gallery This week we also launched a beta version of the http://nuget.org web-site – which allows anyone to easily search and browse an online gallery of open source packages available via NuGet.  The site also now allows developers to optionally submit new packages that they wish to share with others.  You can learn more about how to create and share a package here. There are hundreds of open-source .NET projects already within the NuGet Gallery today.  We hope to have thousands there in the future. IIS Express 7.5 Today we are also shipping IIS Express 7.5.  IIS Express is a free version of IIS 7.5 that is optimized for developer scenarios.  It works for both ASP.NET Web Forms and ASP.NET MVC project types. We think IIS Express combines the ease of use of the ASP.NET Web Server (aka Cassini) currently built-into Visual Studio today with the full power of IIS.  Specifically: It’s lightweight and easy to install (less than 5Mb download and a quick install) It does not require an administrator account to run/debug applications from Visual Studio It enables a full web-server feature set – including SSL, URL Rewrite, and other IIS 7.x modules It supports and enables the same extensibility model and web.config file settings that IIS 7.x support It can be installed side-by-side with the full IIS web server as well as the ASP.NET Development Server (they do not conflict at all) It works on Windows XP and higher operating systems – giving you a full IIS 7.x developer feature-set on all Windows OS platforms IIS Express (like the ASP.NET Development Server) can be quickly launched to run a site from a directory on disk.  It does not require any registration/configuration steps. This makes it really easy to launch and run for development scenarios.  You can also optionally redistribute IIS Express with your own applications if you want a lightweight web-server.  The standard IIS Express EULA now includes redistributable rights. Visual Studio 2010 SP1 adds support for IIS Express.  Read my VS 2010 SP1 and IIS Express blog post to learn more about what it enables.  SQL Server Compact Edition 4 Today we are also shipping SQL Server Compact Edition 4 (aka SQL CE 4).  SQL CE is a free, embedded, database engine that enables easy database storage. No Database Installation Required SQL CE does not require you to run a setup or install a database server in order to use it.  You can simply copy the SQL CE binaries into the \bin directory of your ASP.NET application, and then your web application can use it as a database engine.  No setup or extra security permissions are required for it to run. You do not need to have an administrator account on the machine. Just copy your web application onto any server and it will work. This is true even of medium-trust applications running in a web hosting environment. SQL CE runs in-memory within your ASP.NET application and will start-up when you first access a SQL CE database, and will automatically shutdown when your application is unloaded.  SQL CE databases are stored as files that live within the \App_Data folder of your ASP.NET Applications. Works with Existing Data APIs SQL CE 4 works with existing .NET-based data APIs, and supports a SQL Server compatible query syntax.  This means you can use existing data APIs like ADO.NET, as well as use higher-level ORMs like Entity Framework and NHibernate with SQL CE.  This enables you to use the same data programming skills and data APIs you know today. Supports Development, Testing and Production Scenarios SQL CE can be used for development scenarios, testing scenarios, and light production usage scenarios.  With the SQL CE 4 release we’ve done the engineering work to ensure that SQL CE won’t crash or deadlock when used in a multi-threaded server scenario (like ASP.NET).  This is a big change from previous releases of SQL CE – which were designed for client-only scenarios and which explicitly blocked running in web-server environments.  Starting with SQL CE 4 you can use it in a web-server as well. There are no license restrictions with SQL CE.  It is also totally free. Tooling Support with VS 2010 SP1 Visual Studio 2010 SP1 adds support for SQL CE 4 and ASP.NET Projects.  Read my VS 2010 SP1 and SQL CE 4 blog post to learn more about what it enables.  Web Deploy and Web Farm Framework 2.0 Today we are also releasing Microsoft Web Deploy V2 and Microsoft Web Farm Framework V2.  These services provide a flexible and powerful way to deploy ASP.NET applications onto either a single server, or across a web farm of machines. You can learn more about these capabilities from my previous blog posts on them: Introducing the Microsoft Web Farm Framework Automating Deployment with Microsoft Web Deploy Visit the http://iis.net website to learn more and install them. Both are free. Orchard 1.0 Today we are also releasing Orchard v1.0.  Orchard is a free, open source, community based project.  It provides Content Management System (CMS) and Blogging System support out of the box, and makes it possible to easily create and manage web-sites without having to write code (site owners can customize a site through the browser-based editing tools built-into Orchard).  Read these tutorials to learn more about how you can setup and manage your own Orchard site. Orchard itself is built as an ASP.NET MVC 3 application using Razor view templates (and by default uses SQL CE 4 for data storage).  Developers wishing to extend an Orchard site with custom functionality can open and edit it as a Visual Studio project – and add new ASP.NET MVC Controllers/Views to it.  WebMatrix 1.0 WebMatrix is a new, free, web development tool from Microsoft that provides a suite of technologies that make it easier to enable website development.  It enables a developer to start a new site by browsing and downloading an app template from an online gallery of web applications (which includes popular apps like Umbraco, DotNetNuke, Orchard, WordPress, Drupal and Joomla).  Alternatively it also enables developers to create and code web sites from scratch. WebMatrix is task focused and helps guide developers as they work on sites.  WebMatrix includes IIS Express, SQL CE 4, and ASP.NET - providing an integrated web-server, database and programming framework combination.  It also includes built-in web publishing support which makes it easy to find and deploy sites to web hosting providers. You can learn more about WebMatrix from my Introducing WebMatrix blog post this summer.  Visit http://microsoft.com/web to download and install it today. Summary I’m really excited about today’s releases – they provide a bunch of additional value that makes web development with ASP.NET, Visual Studio and the Microsoft Web Server a lot better.  A lot of folks worked hard to share this with you today. On behalf of my whole team – we hope you enjoy them! Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • Ancillary Objects: Separate Debug ELF Files For Solaris

    - by Ali Bahrami
    We introduced a new object ELF object type in Solaris 11 Update 1 called the Ancillary Object. This posting describes them, using material originally written during their development, the PSARC arc case, and the Solaris Linker and Libraries Manual. ELF objects contain allocable sections, which are mapped into memory at runtime, and non-allocable sections, which are present in the file for use by debuggers and observability tools, but which are not mapped or used at runtime. Typically, all of these sections exist within a single object file. Ancillary objects allow them to instead go into a separate file. There are different reasons given for wanting such a feature. One can debate whether the added complexity is worth the benefit, and in most cases it is not. However, one important case stands out — customers with very large 32-bit objects who are not ready or able to make the transition to 64-bits. We have customers who build extremely large 32-bit objects. Historically, the debug sections in these objects have used the stabs format, which is limited, but relatively compact. In recent years, the industry has transitioned to the powerful but verbose DWARF standard. In some cases, the size of these debug sections is large enough to push the total object file size past the fundamental 4GB limit for 32-bit ELF object files. The best, and ultimately only, solution to overly large objects is to transition to 64-bits. However, consider environments where: Hundreds of users may be executing the code on large shared systems. (32-bits use less memory and bus bandwidth, and on sparc runs just as fast as 64-bit code otherwise). Complex finely tuned code, where the original authors may no longer be available. Critical production code, that was expensive to qualify and bring online, and which is otherwise serving its intended purpose without issue. Users in these risk adverse and/or high scale categories have good reasons to push 32-bits objects to the limit before moving on. Ancillary objects offer these users a longer runway. Design The design of ancillary objects is intended to be simple, both to help human understanding when examining elfdump output, and to lower the bar for debuggers such as dbx to support them. The primary and ancillary objects have the same set of section headers, with the same names, in the same order (i.e. each section has the same index in both files). A single added section of type SHT_SUNW_ANCILLARY is added to both objects, containing information that allows a debugger to identify and validate both files relative to each other. Given one of these files, the ancillary section allows you to identify the other. Allocable sections go in the primary object, and non-allocable ones go into the ancillary object. A small set of non-allocable objects, notably the symbol table, are copied into both objects. As noted above, most sections are only written to one of the two objects, but both objects have the same section header array. The section header in the file that does not contain the section data is tagged with the SHF_SUNW_ABSENT section header flag to indicate its placeholder status. Compiler writers and others who produce objects can set the SUNW_SHF_PRIMARY section header flag to mark non-allocable sections that should go to the primary object rather than the ancillary. If you don't request an ancillary object, the Solaris ELF format is unchanged. Users who don't use ancillary objects do not pay for the feature. This is important, because they exist to serve a small subset of our users, and must not complicate the common case. If you do request an ancillary object, the runtime behavior of the primary object will be the same as that of a normal object. There is no added runtime cost. The primary and ancillary object together represent a logical single object. This is facilitated by the use of a single set of section headers. One can easily imagine a tool that can merge a primary and ancillary object into a single file, or the reverse. (Note that although this is an interesting intellectual exercise, we don't actually supply such a tool because there's little practical benefit above and beyond using ld to create the files). Among the benefits of this approach are: There is no need for per-file symbol tables to reflect the contents of each file. The same symbol table that would be produced for a standard object can be used. The section contents are identical in either case — there is no need to alter data to accommodate multiple files. It is very easy for a debugger to adapt to these new files, and the processing involved can be encapsulated in input/output routines. Most of the existing debugger implementation applies without modification. The limit of a 4GB 32-bit output object is now raised to 4GB of code, and 4GB of debug data. There is also the future possibility (not currently supported) to support multiple ancillary objects, each of which could contain up to 4GB of additional debug data. It must be noted however that the 32-bit DWARF debug format is itself inherently 32-bit limited, as it uses 32-bit offsets between debug sections, so the ability to employ multiple ancillary object files may not turn out to be useful. Using Ancillary Objects (From the Solaris Linker and Libraries Guide) By default, objects contain both allocable and non-allocable sections. Allocable sections are the sections that contain executable code and the data needed by that code at runtime. Non-allocable sections contain supplemental information that is not required to execute an object at runtime. These sections support the operation of debuggers and other observability tools. The non-allocable sections in an object are not loaded into memory at runtime by the operating system, and so, they have no impact on memory use or other aspects of runtime performance no matter their size. For convenience, both allocable and non-allocable sections are normally maintained in the same file. However, there are situations in which it can be useful to separate these sections. To reduce the size of objects in order to improve the speed at which they can be copied across wide area networks. To support fine grained debugging of highly optimized code requires considerable debug data. In modern systems, the debugging data can easily be larger than the code it describes. The size of a 32-bit object is limited to 4 Gbytes. In very large 32-bit objects, the debug data can cause this limit to be exceeded and prevent the creation of the object. To limit the exposure of internal implementation details. Traditionally, objects have been stripped of non-allocable sections in order to address these issues. Stripping is effective, but destroys data that might be needed later. The Solaris link-editor can instead write non-allocable sections to an ancillary object. This feature is enabled with the -z ancillary command line option. $ ld ... -z ancillary[=outfile] ...By default, the ancillary file is given the same name as the primary output object, with a .anc file extension. However, a different name can be provided by providing an outfile value to the -z ancillary option. When -z ancillary is specified, the link-editor performs the following actions. All allocable sections are written to the primary object. In addition, all non-allocable sections containing one or more input sections that have the SHF_SUNW_PRIMARY section header flag set are written to the primary object. All remaining non-allocable sections are written to the ancillary object. The following non-allocable sections are written to both the primary object and ancillary object. .shstrtab The section name string table. .symtab The full non-dynamic symbol table. .symtab_shndx The symbol table extended index section associated with .symtab. .strtab The non-dynamic string table associated with .symtab. .SUNW_ancillary Contains the information required to identify the primary and ancillary objects, and to identify the object being examined. The primary object and all ancillary objects contain the same array of sections headers. Each section has the same section index in every file. Although the primary and ancillary objects all define the same section headers, the data for most sections will be written to a single file as described above. If the data for a section is not present in a given file, the SHF_SUNW_ABSENT section header flag is set, and the sh_size field is 0. This organization makes it possible to acquire a full list of section headers, a complete symbol table, and a complete list of the primary and ancillary objects from either of the primary or ancillary objects. The following example illustrates the underlying implementation of ancillary objects. An ancillary object is created by adding the -z ancillary command line option to an otherwise normal compilation. The file utility shows that the result is an executable named a.out, and an associated ancillary object named a.out.anc. $ cat hello.c #include <stdio.h> int main(int argc, char **argv) { (void) printf("hello, world\n"); return (0); } $ cc -g -zancillary hello.c $ file a.out a.out.anc a.out: ELF 32-bit LSB executable 80386 Version 1 [FPU], dynamically linked, not stripped, ancillary object a.out.anc a.out.anc: ELF 32-bit LSB ancillary 80386 Version 1, primary object a.out $ ./a.out hello worldThe resulting primary object is an ordinary executable that can be executed in the usual manner. It is no different at runtime than an executable built without the use of ancillary objects, and then stripped of non-allocable content using the strip or mcs commands. As previously described, the primary object and ancillary objects contain the same section headers. To see how this works, it is helpful to use the elfdump utility to display these section headers and compare them. The following table shows the section header information for a selection of headers from the previous link-edit example. Index Section Name Type Primary Flags Ancillary Flags Primary Size Ancillary Size 13 .text PROGBITS ALLOC EXECINSTR ALLOC EXECINSTR SUNW_ABSENT 0x131 0 20 .data PROGBITS WRITE ALLOC WRITE ALLOC SUNW_ABSENT 0x4c 0 21 .symtab SYMTAB 0 0 0x450 0x450 22 .strtab STRTAB STRINGS STRINGS 0x1ad 0x1ad 24 .debug_info PROGBITS SUNW_ABSENT 0 0 0x1a7 28 .shstrtab STRTAB STRINGS STRINGS 0x118 0x118 29 .SUNW_ancillary SUNW_ancillary 0 0 0x30 0x30 The data for most sections is only present in one of the two files, and absent from the other file. The SHF_SUNW_ABSENT section header flag is set when the data is absent. The data for allocable sections needed at runtime are found in the primary object. The data for non-allocable sections used for debugging but not needed at runtime are placed in the ancillary file. A small set of non-allocable sections are fully present in both files. These are the .SUNW_ancillary section used to relate the primary and ancillary objects together, the section name string table .shstrtab, as well as the symbol table.symtab, and its associated string table .strtab. It is possible to strip the symbol table from the primary object. A debugger that encounters an object without a symbol table can use the .SUNW_ancillary section to locate the ancillary object, and access the symbol contained within. The primary object, and all associated ancillary objects, contain a .SUNW_ancillary section that allows all the objects to be identified and related together. $ elfdump -T SUNW_ancillary a.out a.out.anc a.out: Ancillary Section: .SUNW_ancillary index tag value [0] ANC_SUNW_CHECKSUM 0x8724 [1] ANC_SUNW_MEMBER 0x1 a.out [2] ANC_SUNW_CHECKSUM 0x8724 [3] ANC_SUNW_MEMBER 0x1a3 a.out.anc [4] ANC_SUNW_CHECKSUM 0xfbe2 [5] ANC_SUNW_NULL 0 a.out.anc: Ancillary Section: .SUNW_ancillary index tag value [0] ANC_SUNW_CHECKSUM 0xfbe2 [1] ANC_SUNW_MEMBER 0x1 a.out [2] ANC_SUNW_CHECKSUM 0x8724 [3] ANC_SUNW_MEMBER 0x1a3 a.out.anc [4] ANC_SUNW_CHECKSUM 0xfbe2 [5] ANC_SUNW_NULL 0 The ancillary sections for both objects contain the same number of elements, and are identical except for the first element. Each object, starting with the primary object, is introduced with a MEMBER element that gives the file name, followed by a CHECKSUM that identifies the object. In this example, the primary object is a.out, and has a checksum of 0x8724. The ancillary object is a.out.anc, and has a checksum of 0xfbe2. The first element in a .SUNW_ancillary section, preceding the MEMBER element for the primary object, is always a CHECKSUM element, containing the checksum for the file being examined. The presence of a .SUNW_ancillary section in an object indicates that the object has associated ancillary objects. The names of the primary and all associated ancillary objects can be obtained from the ancillary section from any one of the files. It is possible to determine which file is being examined from the larger set of files by comparing the first checksum value to the checksum of each member that follows. Debugger Access and Use of Ancillary Objects Debuggers and other observability tools must merge the information found in the primary and ancillary object files in order to build a complete view of the object. This is equivalent to processing the information from a single file. This merging is simplified by the primary object and ancillary objects containing the same section headers, and a single symbol table. The following steps can be used by a debugger to assemble the information contained in these files. Starting with the primary object, or any of the ancillary objects, locate the .SUNW_ancillary section. The presence of this section identifies the object as part of an ancillary group, contains information that can be used to obtain a complete list of the files and determine which of those files is the one currently being examined. Create a section header array in memory, using the section header array from the object being examined as an initial template. Open and read each file identified by the .SUNW_ancillary section in turn. For each file, fill in the in-memory section header array with the information for each section that does not have the SHF_SUNW_ABSENT flag set. The result will be a complete in-memory copy of the section headers with pointers to the data for all sections. Once this information has been acquired, the debugger can proceed as it would in the single file case, to access and control the running program. Note - The ELF definition of ancillary objects provides for a single primary object, and an arbitrary number of ancillary objects. At this time, the Oracle Solaris link-editor only produces a single ancillary object containing all non-allocable sections. This may change in the future. Debuggers and other observability tools should be written to handle the general case of multiple ancillary objects. ELF Implementation Details (From the Solaris Linker and Libraries Guide) To implement ancillary objects, it was necessary to extend the ELF format to add a new object type (ET_SUNW_ANCILLARY), a new section type (SHT_SUNW_ANCILLARY), and 2 new section header flags (SHF_SUNW_ABSENT, SHF_SUNW_PRIMARY). In this section, I will detail these changes, in the form of diffs to the Solaris Linker and Libraries manual. Part IV ELF Application Binary Interface Chapter 13: Object File Format Object File Format Edit Note: This existing section at the beginning of the chapter describes the ELF header. There's a table of object file types, which now includes the new ET_SUNW_ANCILLARY type. e_type Identifies the object file type, as listed in the following table. NameValueMeaning ET_NONE0No file type ET_REL1Relocatable file ET_EXEC2Executable file ET_DYN3Shared object file ET_CORE4Core file ET_LOSUNW0xfefeStart operating system specific range ET_SUNW_ANCILLARY0xfefeAncillary object file ET_HISUNW0xfefdEnd operating system specific range ET_LOPROC0xff00Start processor-specific range ET_HIPROC0xffffEnd processor-specific range Sections Edit Note: This overview section defines the section header structure, and provides a high level description of known sections. It was updated to define the new SHF_SUNW_ABSENT and SHF_SUNW_PRIMARY flags and the new SHT_SUNW_ANCILLARY section. ... sh_type Categorizes the section's contents and semantics. Section types and their descriptions are listed in Table 13-5. sh_flags Sections support 1-bit flags that describe miscellaneous attributes. Flag definitions are listed in Table 13-8. ... Table 13-5 ELF Section Types, sh_type NameValue . . . SHT_LOSUNW0x6fffffee SHT_SUNW_ancillary0x6fffffee . . . ... SHT_LOSUNW - SHT_HISUNW Values in this inclusive range are reserved for Oracle Solaris OS semantics. SHT_SUNW_ANCILLARY Present when a given object is part of a group of ancillary objects. Contains information required to identify all the files that make up the group. See Ancillary Section. ... Table 13-8 ELF Section Attribute Flags NameValue . . . SHF_MASKOS0x0ff00000 SHF_SUNW_NODISCARD0x00100000 SHF_SUNW_ABSENT0x00200000 SHF_SUNW_PRIMARY0x00400000 SHF_MASKPROC0xf0000000 . . . ... SHF_SUNW_ABSENT Indicates that the data for this section is not present in this file. When ancillary objects are created, the primary object and any ancillary objects, will all have the same section header array, to facilitate merging them to form a complete view of the object, and to allow them to use the same symbol tables. Each file contains a subset of the section data. The data for allocable sections is written to the primary object while the data for non-allocable sections is written to an ancillary file. The SHF_SUNW_ABSENT flag is used to indicate that the data for the section is not present in the object being examined. When the SHF_SUNW_ABSENT flag is set, the sh_size field of the section header must be 0. An application encountering an SHF_SUNW_ABSENT section can choose to ignore the section, or to search for the section data within one of the related ancillary files. SHF_SUNW_PRIMARY The default behavior when ancillary objects are created is to write all allocable sections to the primary object and all non-allocable sections to the ancillary objects. The SHF_SUNW_PRIMARY flag overrides this behavior. Any output section containing one more input section with the SHF_SUNW_PRIMARY flag set is written to the primary object without regard for its allocable status. ... Two members in the section header, sh_link, and sh_info, hold special information, depending on section type. Table 13-9 ELF sh_link and sh_info Interpretation sh_typesh_linksh_info . . . SHT_SUNW_ANCILLARY The section header index of the associated string table. 0 . . . Special Sections Edit Note: This section describes the sections used in Solaris ELF objects, using the types defined in the previous description of section types. It was updated to define the new .SUNW_ancillary (SHT_SUNW_ANCILLARY) section. Various sections hold program and control information. Sections in the following table are used by the system and have the indicated types and attributes. Table 13-10 ELF Special Sections NameTypeAttribute . . . .SUNW_ancillarySHT_SUNW_ancillaryNone . . . ... .SUNW_ancillary Present when a given object is part of a group of ancillary objects. Contains information required to identify all the files that make up the group. See Ancillary Section for details. ... Ancillary Section Edit Note: This new section provides the format reference describing the layout of a .SUNW_ancillary section and the meaning of the various tags. Note that these sections use the same tag/value concept used for dynamic and capabilities sections, and will be familiar to anyone used to working with ELF. In addition to the primary output object, the Solaris link-editor can produce one or more ancillary objects. Ancillary objects contain non-allocable sections that would normally be written to the primary object. When ancillary objects are produced, the primary object and all of the associated ancillary objects contain a SHT_SUNW_ancillary section, containing information that identifies these related objects. Given any one object from such a group, the ancillary section provides the information needed to identify and interpret the others. This section contains an array of the following structures. See sys/elf.h. typedef struct { Elf32_Word a_tag; union { Elf32_Word a_val; Elf32_Addr a_ptr; } a_un; } Elf32_Ancillary; typedef struct { Elf64_Xword a_tag; union { Elf64_Xword a_val; Elf64_Addr a_ptr; } a_un; } Elf64_Ancillary; For each object with this type, a_tag controls the interpretation of a_un. a_val These objects represent integer values with various interpretations. a_ptr These objects represent file offsets or addresses. The following ancillary tags exist. Table 13-NEW1 ELF Ancillary Array Tags NameValuea_un ANC_SUNW_NULL0Ignored ANC_SUNW_CHECKSUM1a_val ANC_SUNW_MEMBER2a_ptr ANC_SUNW_NULL Marks the end of the ancillary section. ANC_SUNW_CHECKSUM Provides the checksum for a file in the c_val element. When ANC_SUNW_CHECKSUM precedes the first instance of ANC_SUNW_MEMBER, it provides the checksum for the object from which the ancillary section is being read. When it follows an ANC_SUNW_MEMBER tag, it provides the checksum for that member. ANC_SUNW_MEMBER Specifies an object name. The a_ptr element contains the string table offset of a null-terminated string, that provides the file name. An ancillary section must always contain an ANC_SUNW_CHECKSUM before the first instance of ANC_SUNW_MEMBER, identifying the current object. Following that, there should be an ANC_SUNW_MEMBER for each object that makes up the complete set of objects. Each ANC_SUNW_MEMBER should be followed by an ANC_SUNW_CHECKSUM for that object. A typical ancillary section will therefore be structured as: TagMeaning ANC_SUNW_CHECKSUMChecksum of this object ANC_SUNW_MEMBERName of object #1 ANC_SUNW_CHECKSUMChecksum for object #1 . . . ANC_SUNW_MEMBERName of object N ANC_SUNW_CHECKSUMChecksum for object N ANC_SUNW_NULL An object can therefore identify itself by comparing the initial ANC_SUNW_CHECKSUM to each of the ones that follow, until it finds a match. Related Other Work The GNU developers have also encountered the need/desire to support separate debug information files, and use the solution detailed at http://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html. At the current time, the separate debug file is constructed by building the standard object first, and then copying the debug data out of it in a separate post processing step, Hence, it is limited to a total of 4GB of code and debug data, just as a single object file would be. They are aware of this, and I have seen online comments indicating that they may add direct support for generating these separate files to their link-editor. It is worth noting that the GNU objcopy utility is available on Solaris, and that the Studio dbx debugger is able to use these GNU style separate debug files even on Solaris. Although this is interesting in terms giving Linux users a familiar environment on Solaris, the 4GB limit means it is not an answer to the problem of very large 32-bit objects. We have also encountered issues with objcopy not understanding Solaris-specific ELF sections, when using this approach. The GNU community also has a current effort to adapt their DWARF debug sections in order to move them to separate files before passing the relocatable objects to the linker. The details of Project Fission can be found at http://gcc.gnu.org/wiki/DebugFission. The goal of this project appears to be to reduce the amount of data seen by the link-editor. The primary effort revolves around moving DWARF data to separate .dwo files so that the link-editor never encounters them. The details of modifying the DWARF data to be usable in this form are involved — please see the above URL for details.

    Read the article

  • The Template Method Design Pattern using C# .Net

    - by nijhawan.saurabh
    First of all I'll just put this pattern in context and describe its intent as in the GOF book:   Template Method: Define the skeleton of an algorithm in an operation, deferring some steps to Subclasses. Template Method lets subclasses redefine certain steps of an algorithm without changing the Algorithm's Structure.    Usage: When you are certain about the High Level steps involved in an Algorithm/Work flow you can use the Template Pattern which allows the Base Class to define the Sequence of the Steps but permits the Sub classes to alter the implementation of any/all steps.   Example in the .Net framework: The most common example is the Asp.Net Page Life Cycle. The Page Life Cycle has a few methods which are called in a sequence but we have the liberty to modify the functionality of any of the methods by overriding them.   Sample implementation of Template Method Pattern:   Let's see the class diagram first:            Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:8.0pt; mso-para-margin-left:0in; line-height:107%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-font-kerning:1.0pt; mso-ligatures:standard;}   And here goes the code:EmailBase.cs     1 using System;     2 using System.Collections.Generic;     3 using System.Linq;     4 using System.Text;     5 using System.Threading.Tasks;     6      7 namespace TemplateMethod     8 {     9     public abstract class EmailBase    10     {    11     12         public bool SendEmail()    13         {    14             if (CheckEmailAddress() == true) // Method1 in the sequence    15             {    16                 if (ValidateMessage() == true) // Method2 in the sequence    17                 {    18                     if (SendMail() == true) // Method3 in the sequence    19                     {    20                         return true;    21                     }    22                     else    23                     {    24                         return false;    25                     }    26     27                 }    28                 else    29                 {    30                     return false;    31                 }    32     33             }    34             else    35             {    36                 return false;    37     38             }    39     40     41         }    42     43         protected abstract bool CheckEmailAddress();    44         protected abstract bool ValidateMessage();    45         protected abstract bool SendMail();    46     47     48     }    49 }    50    EmailYahoo.cs      1 using System;     2 using System.Collections.Generic;     3 using System.Linq;     4 using System.Text;     5 using System.Threading.Tasks;     6      7 namespace TemplateMethod     8 {     9     public class EmailYahoo:EmailBase    10     {    11     12         protected override bool CheckEmailAddress()    13         {    14             Console.WriteLine("Checking Email Address : YahooEmail");    15             return true;    16         }    17         protected override bool ValidateMessage()    18         {    19             Console.WriteLine("Validating Email Message : YahooEmail");    20             return true;    21         }    22     23     24         protected override bool SendMail()    25         {    26             Console.WriteLine("Semding Email : YahooEmail");    27             return true;    28         }    29     30     31     }    32 }    33   EmailGoogle.cs      1 using System;     2 using System.Collections.Generic;     3 using System.Linq;     4 using System.Text;     5 using System.Threading.Tasks;     6      7 namespace TemplateMethod     8 {     9     public class EmailGoogle:EmailBase    10     {    11     12         protected override bool CheckEmailAddress()    13         {    14             Console.WriteLine("Checking Email Address : GoogleEmail");    15             return true;    16         }    17         protected override bool ValidateMessage()    18         {    19             Console.WriteLine("Validating Email Message : GoogleEmail");    20             return true;    21         }    22     23     24         protected override bool SendMail()    25         {    26             Console.WriteLine("Semding Email : GoogleEmail");    27             return true;    28         }    29     30     31     }    32 }    33   Program.cs      1 using System;     2 using System.Collections.Generic;     3 using System.Linq;     4 using System.Text;     5 using System.Threading.Tasks;     6      7 namespace TemplateMethod     8 {     9     class Program    10     {    11         static void Main(string[] args)    12         {    13             Console.WriteLine("Please choose an Email Account to send an Email:");    14             Console.WriteLine("Choose 1 for Google");    15             Console.WriteLine("Choose 2 for Yahoo");    16             string choice = Console.ReadLine();    17     18             if (choice == "1")    19             {    20                 EmailBase email = new EmailGoogle(); // Rather than newing it up here, you may use a factory to do so.    21                 email.SendEmail();    22     23             }    24             if (choice == "2")    25             {    26                 EmailBase email = new EmailYahoo(); // Rather than newing it up here, you may use a factory to do so.    27                 email.SendEmail();    28             }    29         }    30     }    31 }    32    Final Words: It's very obvious that why the Template Method Pattern is a popular pattern, everything at last revolves around Algorithms and if you are clear with the steps involved it makes real sense to delegate the duty of implementing the step's functionality to the sub classes. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:8.0pt; mso-para-margin-left:0in; line-height:107%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-font-kerning:1.0pt; mso-ligatures:standard;}

    Read the article

  • Glassfish 3 Cant update JDK no way

    - by Parhs
    Hello.. I was using 1.6.0_19 jdk and installed 1.6.0_20 jdk.. Glassfish doesnt like that... Here are my windows environment variables.. ALLUSERSPROFILE=C:\ProgramData ANT_HOME=C:\apache-ant-1.8.1\ APPDATA=C:\Users\Parhs\AppData\Roaming CommonProgramFiles=C:\Program Files\Common Files COMPUTERNAME=PARHS-PC ComSpec=C:\Windows\system32\cmd.exe FP_NO_HOST_CHECK=NO HOMEDRIVE=C: HOMEPATH=\Users\Parhs JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20\ LOCALAPPDATA=C:\Users\Parhs\AppData\Local LOGONSERVER=\\PARHS-PC NUMBER_OF_PROCESSORS=2 OS=Windows_NT Path=C:\Program Files\PHP\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wb em;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Toshiba\Bluetoot h Toshiba Stack\sys\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\apa che-ant-1.8.1\bin PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC PHPRC=C:\Program Files\PHP\php.ini PROCESSOR_ARCHITECTURE=x86 PROCESSOR_IDENTIFIER=x86 Family 6 Model 14 Stepping 8, GenuineIntel PROCESSOR_LEVEL=6 PROCESSOR_REVISION=0e08 ProgramData=C:\ProgramData ProgramFiles=C:\Program Files PROMPT=$P$G PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\ PUBLIC=C:\Users\Public SESSIONNAME=Console SystemDrive=C: SystemRoot=C:\Windows TEMP=C:\Users\Parhs\AppData\Local\Temp TMP=C:\Users\Parhs\AppData\Local\Temp USERDOMAIN=Parhs-PC USERNAME=Parhs USERPROFILE=C:\Users\Parhs VS90COMNTOOLS=C:\Program Files\Microsoft Visual Studio 9.0\Common7\Tools\ windir=C:\Windows Also here is my asenv.bat REM DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER. REM REM Copyright 2004-2009 Sun Microsystems, Inc. All rights reserved. REM REM Use is subject to License Terms REM set AS_IMQ_LIB=....\mq\lib set AS_IMQ_BIN=....\mq\bin set AS_CONFIG=..\config set AS_INSTALL=.. set AS_DEF_DOMAINS_PATH=..\domains set AS_DERBY_INSTALL=....\javadb set AS_JAVA="C:\Program Files\Java\jdk1.6.0_20" And although restarting system and server i am getting this report Operating System Information: Name of the Operating System: Windows 7 Binary Architecture name of the Operating System: x86, Version: 6.1 Number of processors available on the Operating System: 2 System load on the available processors for the last minute: -1.0. (Sum of running and queued runnable entities per minute) General Java Runtime Environment Information for the VM: 6152@Parhs-PC JRE BootClassPath: C:\glassfishv3\glassfish/modules/endorsed\javax.annotation.jar;C:\glassfishv3\glassfish/modules/endorsed\jaxb-api-osgi.jar;C:\glassfishv3\glassfish/modules/endorsed\webservices-api-osgi.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_19\jre\classes;C:\glassfishv3\glassfish\lib\monitor\btrace-boot.jar JRE ClassPath: C:\glassfishv3\glassfish\modules\glassfish.jar;C:\glassfishv3\glassfish\lib\monitor\btrace-agent.jar JRE Native Library Path: C:\Program Files\Java\jdk1.6.0_19\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Program Files\PHP\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Toshiba\Bluetooth Toshiba Stack\sys\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\apache-ant-1.8.1\bin JRE name: Java HotSpot(TM) Client VM Vendor: Sun Microsystems Inc. Version: 16.2-b04 List of System Properties for the Java Virtual Machine: ANTLR_USE_DIRECT_CLASS_LOADING = true AS_CONFIG = C:\glassfishv3\glassfish\config\..\config AS_DEF_DOMAINS_PATH = C:\glassfishv3\glassfish\config\..\domains AS_DERBY_INSTALL = C:\glassfishv3\glassfish\config\..\..\javadb AS_IMQ_BIN = C:\glassfishv3\glassfish\config\..\..\mq\bin AS_IMQ_LIB = C:\glassfishv3\glassfish\config\..\..\mq\lib AS_INSTALL = C:\glassfishv3\glassfish\config\.. AS_JAVA = C:\Program Files\Java\jdk1.6.0_20\jre GlassFish_Platform = Felix awt.toolkit = sun.awt.windows.WToolkit catalina.base = C:\glassfishv3\glassfish\domains\domain1 catalina.home = C:\glassfishv3\glassfish\domains\domain1 catalina.useNaming = false com.sun.aas.configRoot = C:\glassfishv3\glassfish\config com.sun.aas.derbyRoot = C:\glassfishv3\javadb com.sun.aas.domainsRoot = C:\glassfishv3\glassfish\domains com.sun.aas.hostName = Parhs-PC com.sun.aas.imqBin = C:\glassfishv3\mq\bin com.sun.aas.imqLib = C:\glassfishv3\mq\lib com.sun.aas.installRoot = C:\glassfishv3\glassfish com.sun.aas.installRootURI = file:/C:/glassfishv3/glassfish/ com.sun.aas.instanceName = server com.sun.aas.instanceRoot = C:\glassfishv3\glassfish\domains\domain1 com.sun.aas.instanceRootURI = file:/C:/glassfishv3/glassfish/domains/domain1/ com.sun.aas.javaRoot = C:\Program Files\Java\jdk1.6.0_19\jre com.sun.enterprise.config.config_environment_factory_class = com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory com.sun.enterprise.hk2.cacheDir = C:\glassfishv3\glassfish\domains\domain1\osgi-cache\felix com.sun.enterprise.jaccprovider.property.repository = C:\glassfishv3\glassfish\domains\domain1/generated/policy com.sun.enterprise.security.httpsOutboundKeyAlias = s1as common.loader = ${catalina.home}/common/classes,${catalina.home}/common/endorsed/*.jar,${catalina.home}/common/lib/*.jar eclipselink.security.usedoprivileged = true ejb.home = C:\glassfishv3\glassfish\modules\ejb felix.config.properties = file:/C:/glassfishv3/glassfish/osgi/felix/conf/config.properties felix.fileinstall.bundles.new.start = true felix.fileinstall.debug = 1 felix.fileinstall.dir = C:\glassfishv3\glassfish/modules/autostart/ felix.fileinstall.poll = 5000 felix.system.properties = file:/C:/glassfishv3/glassfish/osgi/felix/conf/system.properties file.encoding = Cp1253 file.encoding.pkg = sun.io file.separator = \ glassfish.version = GlassFish v3 (build 74.2) hk2.startup.context.args = #Mon Jun 07 20:27:37 EEST 2010 -startup-classpath=C\:\\glassfishv3\\glassfish\\modules\\glassfish.jar;C\:\\glassfishv3\\glassfish\\lib\\monitor\\btrace-agent.jar __time_zero=1275931657334 hk2.startup.context.mainModule=org.glassfish.core.kernel -startup-args=--domain,,,domain1,,,--domaindir,,,C\:\\glassfishv3\\glassfish\\domains\\domain1 --domain=domain1 -startup-classname=com.sun.enterprise.glassfish.bootstrap.ASMain --domaindir=C\:\\glassfishv3\\glassfish\\domains\\domain1 hk2.startup.context.root = C:\glassfishv3\glassfish\modules http.nonProxyHosts = localhost|127.0.0.1|Parhs-PC java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment java.awt.printerjob = sun.awt.windows.WPrinterJob java.class.path = C:\glassfishv3\glassfish\modules\glassfish.jar;C:\glassfishv3\glassfish\lib\monitor\btrace-agent.jar java.class.version = 50.0 java.endorsed.dirs = C:\glassfishv3\glassfish/modules/endorsed;C:\glassfishv3\glassfish/lib/endorsed java.ext.dirs = C:\Program Files\Java\jdk1.6.0_19\jre/lib/ext;C:\Program Files\Java\jdk1.6.0_19\jre/jre/lib/ext;C:\glassfishv3\glassfish\domains\domain1/lib/ext java.home = C:\Program Files\Java\jdk1.6.0_19\jre java.io.tmpdir = C:\Users\Parhs\AppData\Local\Temp\ java.library.path = C:\Program Files\Java\jdk1.6.0_19\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;C:\Program Files\PHP\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Toshiba\Bluetooth Toshiba Stack\sys\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\apache-ant-1.8.1\bin java.net.useSystemProxies = true java.rmi.server.randomIDs = true java.runtime.name = Java(TM) SE Runtime Environment java.runtime.version = 1.6.0_19-b04 java.security.auth.login.config = C:\glassfishv3\glassfish\domains\domain1/config/login.conf java.security.policy = C:\glassfishv3\glassfish\domains\domain1/config/server.policy java.specification.name = Java Platform API Specification java.specification.vendor = Sun Microsystems Inc. java.specification.version = 1.6 java.util.logging.config.file = C:\glassfishv3\glassfish\domains\domain1\config\logging.properties java.vendor = Sun Microsystems Inc. java.vendor.url = http://java.sun.com/ java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi java.version = 1.6.0_19 java.vm.info = mixed mode java.vm.name = Java HotSpot(TM) Client VM java.vm.specification.name = Java Virtual Machine Specification java.vm.specification.vendor = Sun Microsystems Inc. java.vm.specification.version = 1.0 java.vm.vendor = Sun Microsystems Inc. java.vm.version = 16.2-b04 javax.net.ssl.keyStore = C:\glassfishv3\glassfish\domains\domain1/config/keystore.jks javax.net.ssl.keyStorePassword = changeit javax.net.ssl.trustStore = C:\glassfishv3\glassfish\domains\domain1/config/cacerts.jks javax.net.ssl.trustStorePassword = changeit javax.rmi.CORBA.PortableRemoteObjectClass = com.sun.corba.ee.impl.javax.rmi.PortableRemoteObject javax.rmi.CORBA.StubClass = com.sun.corba.ee.impl.javax.rmi.CORBA.StubDelegateImpl javax.rmi.CORBA.UtilClass = com.sun.corba.ee.impl.javax.rmi.CORBA.Util javax.security.jacc.PolicyConfigurationFactory.provider = com.sun.enterprise.security.provider.PolicyConfigurationFactoryImpl jdbc.drivers = org.apache.derby.jdbc.ClientDriver jpa.home = C:\glassfishv3\glassfish\modules\jpa line.separator = org.glassfish.web.rfc2109_cookie_names_enforced = false org.jvnet.hk2.osgimain.autostartBundles = osgi-adapter.jar, org.apache.felix.shell.jar, org.apache.felix.shell.remote.jar, org.apache.felix.configadmin.jar, org.apache.felix.fileinstall.jar org.jvnet.hk2.osgimain.bundlesDir = C:\glassfishv3\glassfish\modules org.jvnet.hk2.osgimain.excludedSubDirs = autostart/ org.omg.CORBA.ORBClass = com.sun.corba.ee.impl.orb.ORBImpl org.omg.CORBA.ORBSingletonClass = com.sun.corba.ee.impl.orb.ORBSingleton org.osgi.framework.storage = C:\glassfishv3\glassfish\domains\domain1\osgi-cache\felix os.arch = x86 os.name = Windows 7 os.version = 6.1 osgi.shell.telnet.ip = 127.0.0.1 osgi.shell.telnet.maxconn = 1 osgi.shell.telnet.port = 6666 package.access = package.definition = path.separator = ; security.home = C:\glassfishv3\glassfish\modules\security server.loader = ${catalina.home}/server/classes,${catalina.home}/server/lib/*.jar shared.loader = ${catalina.home}/shared/classes,${catalina.home}/shared/lib/*.jar sun.arch.data.model = 32 sun.boot.class.path = C:\glassfishv3\glassfish/modules/endorsed\javax.annotation.jar;C:\glassfishv3\glassfish/modules/endorsed\jaxb-api-osgi.jar;C:\glassfishv3\glassfish/modules/endorsed\webservices-api-osgi.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\resources.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\rt.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\sunrsasign.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jsse.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\jce.jar;C:\Program Files\Java\jdk1.6.0_19\jre\lib\charsets.jar;C:\Program Files\Java\jdk1.6.0_19\jre\classes;C:\glassfishv3\glassfish\lib\monitor\btrace-boot.jar sun.boot.library.path = C:\Program Files\Java\jdk1.6.0_19\jre\bin sun.cpu.endian = little sun.cpu.isalist = pentium_pro+mmx pentium_pro pentium+mmx pentium i486 i386 i86 sun.desktop = windows sun.io.unicode.encoding = UnicodeLittle sun.java.launcher = SUN_STANDARD sun.jnu.encoding = Cp1253 sun.management.compiler = HotSpot Client Compiler sun.os.patch.level = user.country = GR user.dir = C:\glassfishv3\glassfish\domains\domain1 user.home = C:\Users\Parhs user.language = el user.name = Parhs user.timezone = Europe/Athens user.variant = web.home = C:\glassfishv3\glassfish\modules\web weld.home = C:\glassfishv3\glassfish\modules\weld Why it is so damn hard??? What am i missing?

    Read the article

  • Linq to LLBLGen query problem

    - by Jeroen Breuer
    Hello, I've got a Stored Procedure and i'm trying to convert it to a Linq to LLBLGen query. The query in Linq to LLBGen works, but when I trace the query which is send to sql server it is far from perfect. This is the Stored Procedure: ALTER PROCEDURE [dbo].[spDIGI_GetAllUmbracoProducts] -- Add the parameters for the stored procedure. @searchText nvarchar(255), @startRowIndex int, @maximumRows int, @sortExpression nvarchar(255) AS BEGIN SET @startRowIndex = @startRowIndex + 1 SET @searchText = '%' + @searchText + '%' -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; -- This is the query which will fetch all the UmbracoProducts. -- This query also supports paging and sorting. WITH UmbracoOverview As ( SELECT ROW_NUMBER() OVER( ORDER BY CASE WHEN @sortExpression = 'productName' THEN umbracoProduct.productName WHEN @sortExpression = 'productCode' THEN umbracoProduct.productCode END ASC, CASE WHEN @sortExpression = 'productName DESC' THEN umbracoProduct.productName WHEN @sortExpression = 'productCode DESC' THEN umbracoProduct.productCode END DESC ) AS row_num, umbracoProduct.umbracoProductId, umbracoProduct.productName, umbracoProduct.productCode FROM umbracoProduct INNER JOIN product ON umbracoProduct.umbracoProductId = product.umbracoProductId WHERE (umbracoProduct.productName LIKE @searchText OR umbracoProduct.productCode LIKE @searchText OR product.code LIKE @searchText OR product.description LIKE @searchText OR product.descriptionLong LIKE @searchText OR product.unitCode LIKE @searchText) ) SELECT UmbracoOverview.UmbracoProductId, UmbracoOverview.productName, UmbracoOverview.productCode FROM UmbracoOverview WHERE (row_num >= @startRowIndex AND row_num < (@startRowIndex + @maximumRows)) -- This query will count all the UmbracoProducts. -- This query is used for paging inside ASP.NET. SELECT COUNT (umbracoProduct.umbracoProductId) AS CountNumber FROM umbracoProduct INNER JOIN product ON umbracoProduct.umbracoProductId = product.umbracoProductId WHERE (umbracoProduct.productName LIKE @searchText OR umbracoProduct.productCode LIKE @searchText OR product.code LIKE @searchText OR product.description LIKE @searchText OR product.descriptionLong LIKE @searchText OR product.unitCode LIKE @searchText) END This is my Linq to LLBLGen query: using System.Linq.Dynamic; var q = ( from up in MetaData.UmbracoProduct join p in MetaData.Product on up.UmbracoProductId equals p.UmbracoProductId where up.ProductCode.Contains(searchText) || up.ProductName.Contains(searchText) || p.Code.Contains(searchText) || p.Description.Contains(searchText) || p.DescriptionLong.Contains(searchText) || p.UnitCode.Contains(searchText) select new UmbracoProductOverview { UmbracoProductId = up.UmbracoProductId, ProductName = up.ProductName, ProductCode = up.ProductCode } ).OrderBy(sortExpression); //Save the count in HttpContext.Current.Items. This value will only be saved during 1 single HTTP request. HttpContext.Current.Items["AllProductsCount"] = q.Count(); //Returns the results paged. return q.Skip(startRowIndex).Take(maximumRows).ToList<UmbracoProductOverview>(); This is my Initial expression to process: value(SD.LLBLGen.Pro.LinqSupportClasses.DataSource`1[Eurofysica.DB.EntityClasses.UmbracoProductEntity]).Join(value(SD.LLBLGen.Pro.LinqSupportClasses.DataSource`1[Eurofysica.DB.EntityClasses.ProductEntity]), up => up.UmbracoProductId, p => p.UmbracoProductId, (up, p) => new <>f__AnonymousType0`2(up = up, p = p)).Where(<>h__TransparentIdentifier0 => (((((<>h__TransparentIdentifier0.up.ProductCode.Contains(value(Eurofysica.BusinessLogic.BLL.Controllers.UmbracoProductController+<>c__DisplayClass1).searchText) || <>h__TransparentIdentifier0.up.ProductName.Contains(value(Eurofysica.BusinessLogic.BLL.Controllers.UmbracoProductController+<>c__DisplayClass1).searchText)) || <>h__TransparentIdentifier0.p.Code.Contains(value(Eurofysica.BusinessLogic.BLL.Controllers.UmbracoProductController+<>c__DisplayClass1).searchText)) || <>h__TransparentIdentifier0.p.Description.Contains(value(Eurofysica.BusinessLogic.BLL.Controllers.UmbracoProductController+<>c__DisplayClass1).searchText)) || <>h__TransparentIdentifier0.p.DescriptionLong.Contains(value(Eurofysica.BusinessLogic.BLL.Controllers.UmbracoProductController+<>c__DisplayClass1).searchText)) || <>h__TransparentIdentifier0.p.UnitCode.Contains(value(Eurofysica.BusinessLogic.BLL.Controllers.UmbracoProductController+<>c__DisplayClass1).searchText))).Select(<>h__TransparentIdentifier0 => new UmbracoProductOverview() {UmbracoProductId = <>h__TransparentIdentifier0.up.UmbracoProductId, ProductName = <>h__TransparentIdentifier0.up.ProductName, ProductCode = <>h__TransparentIdentifier0.up.ProductCode}).OrderBy( => .ProductName).Count() Now this is how the queries look like that are send to sql server: Select query: Query: SELECT [LPA_L2].[umbracoProductId] AS [UmbracoProductId], [LPA_L2].[productName] AS [ProductName], [LPA_L2].[productCode] AS [ProductCode] FROM ( [eurofysica].[dbo].[umbracoProduct] [LPA_L2] INNER JOIN [eurofysica].[dbo].[product] [LPA_L3] ON [LPA_L2].[umbracoProductId] = [LPA_L3].[umbracoProductId]) WHERE ( ( ( ( ( ( ( ( [LPA_L2].[productCode] LIKE @ProductCode1) OR ( [LPA_L2].[productName] LIKE @ProductName2)) OR ( [LPA_L3].[code] LIKE @Code3)) OR ( [LPA_L3].[description] LIKE @Description4)) OR ( [LPA_L3].[descriptionLong] LIKE @DescriptionLong5)) OR ( [LPA_L3].[unitCode] LIKE @UnitCode6)))) Parameter: @ProductCode1 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Parameter: @ProductName2 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Parameter: @Code3 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Parameter: @Description4 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Parameter: @DescriptionLong5 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Parameter: @UnitCode6 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Count query: Query: SELECT TOP 1 COUNT(*) AS [LPAV_] FROM (SELECT [LPA_L2].[umbracoProductId] AS [UmbracoProductId], [LPA_L2].[productName] AS [ProductName], [LPA_L2].[productCode] AS [ProductCode] FROM ( [eurofysica].[dbo].[umbracoProduct] [LPA_L2] INNER JOIN [eurofysica].[dbo].[product] [LPA_L3] ON [LPA_L2].[umbracoProductId] = [LPA_L3].[umbracoProductId]) WHERE ( ( ( ( ( ( ( ( [LPA_L2].[productCode] LIKE @ProductCode1) OR ( [LPA_L2].[productName] LIKE @ProductName2)) OR ( [LPA_L3].[code] LIKE @Code3)) OR ( [LPA_L3].[description] LIKE @Description4)) OR ( [LPA_L3].[descriptionLong] LIKE @DescriptionLong5)) OR ( [LPA_L3].[unitCode] LIKE @UnitCode6))))) [LPA_L1] Parameter: @ProductCode1 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Parameter: @ProductName2 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Parameter: @Code3 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Parameter: @Description4 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Parameter: @DescriptionLong5 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". Parameter: @UnitCode6 : String. Length: 2. Precision: 0. Scale: 0. Direction: Input. Value: "%%". As you can see no sorting or paging is done (like in my Stored Procedure). This is probably done inside the code after all the results are fetched. This costs a lot of performance! Does anybody know how I can convert my Stored Procedure to Linq to LLBLGen the proper way?

    Read the article

  • Can this Query be corrected or different table structure needed? (database dumps provided)

    - by sandeepan
    This is a bit lengthy but I have provided sufficient details and kept things very clear. Please see if you can help. (I will surely accept answer if it solves my problem) I am sure a person experienced with this can surely help or suggest me to decide the tables structure. About the system:- There are tutors who create classes A tags based search approach is being followed Tag relations are created/edited when new tutors registers/edits profile data and when tutors create classes (this makes tutors and classes searcheable).For simplicity, let us consider only tutor name and class name are the fields which are matched against search keywords. In this example, I am considering - tutor "Sandeepan Nath" has created a class called "first class" tutor "Bob Cratchit" has created a class called "new class" Desired search results- AND logic to be appied on the search keywords and match against class and tutor data(class name + tutor name), in other words, All those classes be shown such that all the search terms are present in the class name or its tutor name. Example to be clear - Searching "first class" returns class with id_wc = 1. Working Searching "Sandeepan class" should also return class with id_wc = 1. Not working in System 2. Problem with profile editing and searching To tell in one sentence, I am facing a conflict between the ease of profile edition (edition of tag relations when tutor profiles are edited) and the ease of search logic. In the beginning, we had one table structure and search was easy but tag edition logic was very clumsy and unmaintainable(Check System 1 in the section below) . So we created separate tag relations tables to make profile edition simpler but search has become difficult. Please dump the tables so that you can run the search query I have given below and see the results. System 1 (previous system - search easy - profile edition difficult):- Only one table called All_Tag_Relations table had the all the tag relations. The tags table below is common to both systems 1 and 2. CREATE TABLE IF NOT EXISTS `all_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) unsigned DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `all_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`, `id_wc`) VALUES (1, 1, 1, NULL), (2, 2, 1, NULL), (3, 1, 1, 1), (4, 2, 1, 1), (5, 3, 1, 1), (6, 4, 1, 1), (7, 6, 2, NULL), (8, 7, 2, NULL), (9, 6, 2, 2), (10, 7, 2, 2), (11, 5, 2, 2), (12, 4, 2, 2); CREATE TABLE IF NOT EXISTS `tags` ( `id_tag` int(10) unsigned NOT NULL AUTO_INCREMENT, `tag` varchar(255) DEFAULT NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`), KEY `tag_4` (`tag`), FULLTEXT KEY `tag_5` (`tag`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; INSERT INTO `tags` (`id_tag`, `tag`) VALUES (1, 'Sandeepan'), (2, 'Nath'), (3, 'first'), (4, 'class'), (5, 'new'), (6, 'Bob'), (7, 'Cratchit'); Please note that for every class, the tag rels of its tutor have to be duplicated. Example, for class with id_wc=1, the tag rel records with id_tag_rel = 3 and 4 are actually extras if you compare with the tag rel records with id_tag_rel = 1 and 2. System 2 (present system - profile edition easy, search difficult) Two separate tables Tutors_Tag_Relations and Webclasses_Tag_Relations have the corresponding tag relations data (Please dump into a separate database)- CREATE TABLE IF NOT EXISTS `tutors_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `tutors_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`) VALUES (1, 1, 1), (2, 2, 1), (3, 6, 2), (4, 7, 2); CREATE TABLE IF NOT EXISTS `webclasses_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `webclasses_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `webclasses_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`, `id_wc`) VALUES (1, 3, 1, 1), (2, 4, 1, 1), (3, 5, 2, 2), (4, 4, 2, 2); CREATE TABLE IF NOT EXISTS `tags` ( `id_tag` int(10) unsigned NOT NULL AUTO_INCREMENT, `tag` varchar(255) DEFAULT NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`), KEY `tag_4` (`tag`), FULLTEXT KEY `tag_5` (`tag`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; INSERT INTO `tags` (`id_tag`, `tag`) VALUES (1, 'Sandeepan'), (2, 'Nath'), (3, 'first'), (4, 'class'), (5, 'new'), (6, 'Bob'), (7, 'Cratchit'); CREATE TABLE IF NOT EXISTS `all_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) unsigned DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; insert into All_Tag_Relations select NULL,id_tag,id_tutor,NULL from Tutors_Tag_Relations; insert into All_Tag_Relations select NULL,id_tag,id_tutor,id_wc from Webclasses_Tag_Relations; Here you can see how easily tutor first name can be edited only in one place. But search has become really difficult, so on being advised to use a Temporary table, I am creating one at every search request, then dumping all the necessary data and then searching from it, I am creating this All_Tag_Relations table at search run time. Here I am just dumping all the data from the two tables Tutors_Tag_Relations and Webclasses_Tag_Relations. But, I am still not able to get classes if I search with tutor name This is the query which searches "first class". Running them on both the systems shows correct results (returns the class with id_wc = 1). SELECT wtagrels.id_wc,SUM(DISTINCT( wtagrels.id_tag =3)) AS key_1_total_matches, SUM(DISTINCT( wtagrels.id_tag =4)) AS key_2_total_matches FROM all_tag_relations AS wtagrels WHERE ( wtagrels.id_tag =3 OR wtagrels.id_tag =4 ) GROUP BY wtagrels.id_wc HAVING key_1_total_matches = 1 AND key_2_total_matches = 1 LIMIT 0, 20 But, searching for "Sandeepan class" works only with the 1st system Here is the query which searches "Sandeepan class" SELECT wtagrels.id_wc,SUM(DISTINCT( wtagrels.id_tag =1)) AS key_1_total_matches, SUM(DISTINCT( wtagrels.id_tag =4)) AS key_2_total_matches FROM all_tag_relations AS wtagrels WHERE ( wtagrels.id_tag =1 OR wtagrels.id_tag =4 ) GROUP BY wtagrels.id_wc HAVING key_1_total_matches = 1 AND key_2_total_matches = 1 LIMIT 0, 20 Can anybody alter this query and somehow do a proper join or something to get correct results. That solves my problem in a nice way. As you can figure out, the reason why it does not work in system 2 is that in system 1, for every class, one additional tag relation linking class and tutor name is present. e.g. for class first class, (records with id_tag_rel 3 and 4) which returns the class on searching with tutor name. So, you see the trade-off between the search and profile edition difficulty with the two systems. How do I overcome both. I have to reach a conclusion soon. So far my reasoning is it is definitely not good from a code maintainability point of view to follow the single tag rel table structure of system one, because in a real system while editing a field like "tutor qualifications", there can be as many records in tag rels table as there are words in qualification of a tutor (one word in a field = one tag relation). Now suppose a tutor has 100 classes. When he edits his qualification, all the tag rel rows corresponding to him are deleted and then as many copies are to be created (as per the new qualification data) as there are classes. This becomes particularly difficult if later more searcheable fields are added. The code cannot be robust. Is the best solution to follow system 2 (edition has to be in one table - no extra work for each and every class) and somehow re-create the all_tag_relations table like system 1 (from the tables tutor_tag_relations and webclasses_tag_relations), creating the extra tutor tag rels for each and every class by a tutor (which is currently missing in system 2's temporary all_tag_relations table). That would be a time consuming logic script. I doubt that table can be recreated without resorting to PHP sript (mysql alone cannot do that). But the problem is that running all this at search time will make search definitely slow. So, how do such systems work? How are such situations handled? I thought about we can run a cron which initiates that PHP script, say every 1 minute and replaces the existing all_tag_relations table as per new tag rels from tutor_tag_relations and webclasses_tag_relations (replaces means creates a new table, deletes the original and renames the new one as all_tag_relations, otherwise search won't work during that period- or is there any better way to that?). Anyway, the result would be that any changes by tutors will reflect in search in the next 1 minute and not immediately. An alternateve would be to initate that PHP script every time a tutor edits his profile. But here again, since many users may edit their profiles concurrently, will the creation of so many tables be a burden and can mysql make the server slow? Any help would be appreciated and working solution will be accepted as answer. Thanks, Sandeepan

    Read the article

  • Command does not execute in crontab while command itself works just fine

    - by fuzzybee
    I have this script from Colin Johnson on Github - https://github.com/colinbjohnson/aws-missing-tools/tree/master/ec2-automate-backup It seems great. I have modified it to send email to myself every time an EBS snapshot is created or deleted. The following works like a charm ec2-automate-backup.sh -v "vol-myvolumeid" -k 3 However, it does not execute at all as part of my crontab (I didn't receive any emails) #some command that got commented out */5 * * * * ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3; * * * * * date /root/logs/crontab.log; */5 * * * * date /root/logs/crontab2.log Please note that the 2nd and 3rd execute just fines as I can see the date and time in log files. What could I have missed here? The full ec2-automate-backup.sh is as follows: #!/bin/bash - # Author: Colin Johnson / [email protected] # Date: 2012-09-24 # Version 0.1 # License Type: GNU GENERAL PUBLIC LICENSE, Version 3 # #confirms that executables required for succesful script execution are available prerequisite_check() { for prerequisite in basename ec2-create-snapshot ec2-create-tags ec2-describe-snapshots ec2-delete-snapshot date do #use of "hash" chosen as it is a shell builtin and will add programs to hash table, possibly speeding execution. Use of type also considered - open to suggestions. hash $prerequisite &> /dev/null if [[ $? == 1 ]] #has exits with exit status of 70, executable was not found then echo "In order to use `basename $0`, the executable \"$prerequisite\" must be installed." 1>&2 | mailx -s "Error happened 0" [email protected] ; exit 70 fi done } #get_EBS_List gets a list of available EBS instances depending upon the selection_method of EBS selection that is provided by user input get_EBS_List() { case $selection_method in volumeid) if [[ -z $volumeid ]] then echo "The selection method \"volumeid\" (which is $app_name's default selection_method of operation or requested by using the -s volumeid parameter) requires a volumeid (-v volumeid) for operation. Correct usage is as follows: \"-v vol-6d6a0527\",\"-s volumeid -v vol-6d6a0527\" or \"-v \"vol-6d6a0527 vol-636a0112\"\" if multiple volumes are to be selected." 1>&2 | mailx -s "Error happened 1" [email protected] ; exit 64 fi ebs_selection_string="$volumeid" ;; tag) if [[ -z $tag ]] then echo "The selected selection_method \"tag\" (-s tag) requires a valid tag (-t key=value) for operation. Correct usage is as follows: \"-s tag -t backup=true\" or \"-s tag -t Name=my_tag.\"" 1>&2 | mailx -s "Error happened 2" [email protected] ; exit 64 fi ebs_selection_string="--filter tag:$tag" ;; *) echo "If you specify a selection_method (-s selection_method) for selecting EBS volumes you must select either \"volumeid\" (-s volumeid) or \"tag\" (-s tag)." 1>&2 | mailx -s "Error happened 3" [email protected] ; exit 64 ;; esac #creates a list of all ebs volumes that match the selection string from above ebs_backup_list_complete=`ec2-describe-volumes --show-empty-fields --region $region $ebs_selection_string 2>&1` #takes the output of the previous command ebs_backup_list_result=`echo $?` if [[ $ebs_backup_list_result -gt 0 ]] then echo -e "An error occured when running ec2-describe-volumes. The error returned is below:\n$ebs_backup_list_complete" 1>&2 | mailx -s "Error happened 4" [email protected] ; exit 70 fi ebs_backup_list=`echo "$ebs_backup_list_complete" | grep ^VOLUME | cut -f 2` #code to right will output list of EBS volumes to be backed up: echo -e "Now outputting ebs_backup_list:\n$ebs_backup_list" } create_EBS_Snapshot_Tags() { #snapshot tags holds all tags that need to be applied to a given snapshot - by aggregating tags we ensure that ec2-create-tags is called only onece snapshot_tags="" #if $name_tag_create is true then append ec2ab_${ebs_selected}_$date_current to the variable $snapshot_tags if $name_tag_create then ec2_snapshot_resource_id=`echo "$ec2_create_snapshot_result" | cut -f 2` snapshot_tags="$snapshot_tags --tag Name=ec2ab_${ebs_selected}_$date_current" fi #if $purge_after_days is true, then append $purge_after_date to the variable $snapshot_tags if [[ -n $purge_after_days ]] then snapshot_tags="$snapshot_tags --tag PurgeAfter=$purge_after_date --tag PurgeAllow=true" fi #if $snapshot_tags is not zero length then set the tag on the snapshot using ec2-create-tags if [[ -n $snapshot_tags ]] then echo "Tagging Snapshot $ec2_snapshot_resource_id with the following Tags:" ec2-create-tags $ec2_snapshot_resource_id --region $region $snapshot_tags #echo "Snapshot tags successfully created" | mailx -s "Snapshot tags successfully created" [email protected] fi } date_command_get() { #finds full path to date binary date_binary_full_path=`which date` #command below is used to determine if date binary is gnu, macosx or other date_binary_file_result=`file -b $date_binary_full_path` case $date_binary_file_result in "Mach-O 64-bit executable x86_64") date_binary="macosx" ;; "ELF 64-bit LSB executable, x86-64, version 1 (SYSV)"*) date_binary="gnu" ;; *) date_binary="unknown" ;; esac #based on the installed date binary the case statement below will determine the method to use to determine "purge_after_days" in the future case $date_binary in gnu) date_command="date -d +${purge_after_days}days -u +%Y-%m-%d" ;; macosx) date_command="date -v+${purge_after_days}d -u +%Y-%m-%d" ;; unknown) date_command="date -d +${purge_after_days}days -u +%Y-%m-%d" ;; *) date_command="date -d +${purge_after_days}days -u +%Y-%m-%d" ;; esac } purge_EBS_Snapshots() { #snapshot_tag_list is a string that contains all snapshots with either the key PurgeAllow or PurgeAfter set snapshot_tag_list=`ec2-describe-tags --show-empty-fields --region $region --filter resource-type=snapshot --filter key=PurgeAllow,PurgeAfter` #snapshot_purge_allowed is a list of all snapshot_ids with PurgeAllow=true snapshot_purge_allowed=`echo "$snapshot_tag_list" | grep .*PurgeAllow'\t'true | cut -f 3` for snapshot_id_evaluated in $snapshot_purge_allowed do #gets the "PurgeAfter" date which is in UTC with YYYY-MM-DD format (or %Y-%m-%d) purge_after_date=`echo "$snapshot_tag_list" | grep .*$snapshot_id_evaluated'\t'PurgeAfter.* | cut -f 5` #if purge_after_date is not set then we have a problem. Need to alter user. if [[ -z $purge_after_date ]] #Alerts user to the fact that a Snapshot was found with PurgeAllow=true but with no PurgeAfter date. then echo "A Snapshot with the Snapshot ID $snapshot_id_evaluated has the tag \"PurgeAllow=true\" but does not have a \"PurgeAfter=YYYY-MM-DD\" date. $app_name is unable to determine if $snapshot_id_evaluated should be purged." 1>&2 | mailx -s "Error happened 5" [email protected] else #convert both the date_current and purge_after_date into epoch time to allow for comparison date_current_epoch=`date -j -f "%Y-%m-%d" "$date_current" "+%s"` purge_after_date_epoch=`date -j -f "%Y-%m-%d" "$purge_after_date" "+%s"` #perform compparison - if $purge_after_date_epoch is a lower number than $date_current_epoch than the PurgeAfter date is earlier than the current date - and the snapshot can be safely removed if [[ $purge_after_date_epoch < $date_current_epoch ]] then echo "The snapshot \"$snapshot_id_evaluated\" with the Purge After date of $purge_after_date will be deleted." ec2-delete-snapshot --region $region $snapshot_id_evaluated echo "Old snapshots successfully deleted for $volumeid" | mailx -s "Old snapshots successfully deleted for $volumeid" [email protected] fi fi done } #calls prerequisitecheck function to ensure that all executables required for script execution are available prerequisite_check app_name=`basename $0` #sets defaults selection_method="volumeid" region="ap-southeast-1" #date_binary allows a user to set the "date" binary that is installed on their system and, therefore, the options that will be given to the date binary to perform date calculations date_binary="" #sets the "Name" tag set for a snapshot to false - using "Name" requires that ec2-create-tags be called in addition to ec2-create-snapshot name_tag_create=false #sets the Purge Snapshot feature to false - this feature will eventually allow the removal of snapshots that have a "PurgeAfter" tag that is earlier than current date purge_snapshots=false #handles options processing while getopts :s:r:v:t:k:pn opt do case $opt in s) selection_method="$OPTARG";; r) region="$OPTARG";; v) volumeid="$OPTARG";; t) tag="$OPTARG";; k) purge_after_days="$OPTARG";; n) name_tag_create=true;; p) purge_snapshots=true;; *) echo "Error with Options Input. Cause of failure is most likely that an unsupported parameter was passed or a parameter was passed without a corresponding option." 1>&2 ; exit 64;; esac done #sets date variable date_current=`date -u +%Y-%m-%d` #sets the PurgeAfter tag to the number of days that a snapshot should be retained if [[ -n $purge_after_days ]] then #if the date_binary is not set, call the date_command_get function if [[ -z $date_binary ]] then date_command_get fi purge_after_date=`$date_command` echo "Snapshots taken by $app_name will be eligible for purging after the following date: $purge_after_date." fi #get_EBS_List gets a list of EBS instances for which a snapshot is desired. The list of EBS instances depends upon the selection_method that is provided by user input get_EBS_List #the loop below is called once for each volume in $ebs_backup_list - the currently selected EBS volume is passed in as "ebs_selected" for ebs_selected in $ebs_backup_list do ec2_snapshot_description="ec2ab_${ebs_selected}_$date_current" ec2_create_snapshot_result=`ec2-create-snapshot --region $region -d $ec2_snapshot_description $ebs_selected 2>&1` if [[ $? != 0 ]] then echo -e "An error occured when running ec2-create-snapshot. The error returned is below:\n$ec2_create_snapshot_result" 1>&2 ; exit 70 else ec2_snapshot_resource_id=`echo "$ec2_create_snapshot_result" | cut -f 2` echo "Snapshots successfully created for volume $volumeid" | mailx -s "Snapshots successfully created for $volumeid" [email protected] fi create_EBS_Snapshot_Tags done #if purge_snapshots is true, then run purge_EBS_Snapshots function if $purge_snapshots then echo "Snapshot Purging is Starting Now." purge_EBS_Snapshots fi cron log Oct 23 10:24:01 ip-10-130-153-227 CROND[28214]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:24:01 ip-10-130-153-227 CROND[28215]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:25:01 ip-10-130-153-227 CROND[28228]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:25:01 ip-10-130-153-227 CROND[28229]: (root) CMD (date >> /root/logs/crontab2.log) Oct 23 10:26:01 ip-10-130-153-227 CROND[28239]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:27:01 ip-10-130-153-227 CROND[28247]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:27:01 ip-10-130-153-227 CROND[28248]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:28:01 ip-10-130-153-227 CROND[28263]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:29:01 ip-10-130-153-227 CROND[28275]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:30:01 ip-10-130-153-227 CROND[28292]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:30:01 ip-10-130-153-227 CROND[28293]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:30:01 ip-10-130-153-227 CROND[28294]: (root) CMD (date >> /root/logs/crontab2.log) Oct 23 10:31:01 ip-10-130-153-227 CROND[28312]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:32:01 ip-10-130-153-227 CROND[28319]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:33:01 ip-10-130-153-227 CROND[28325]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:33:01 ip-10-130-153-227 CROND[28324]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:34:01 ip-10-130-153-227 CROND[28345]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:35:01 ip-10-130-153-227 CROND[28362]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:35:01 ip-10-130-153-227 CROND[28363]: (root) CMD (date >> /root/logs/crontab2.log) Mails to root From [email protected] Tue Oct 23 06:00:01 2012 Return-Path: <[email protected]> Date: Tue, 23 Oct 2012 06:00:01 GMT From: [email protected] (Cron Daemon) To: [email protected] Subject: Cron <root@ip-10-130-153-227> root ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3 Content-Type: text/plain; charset=UTF-8 Auto-Submitted: auto-generated X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> X-Cron-Env: <USER=root> Status: R /bin/sh: root: command not found

    Read the article

  • Can this Query can be corrected or different table structure needed? (question is clear, detailed, d

    - by sandeepan
    This is a bit lengthy but I have provided sufficient details and kept things very clear. Please see if you can help. (I will surely accept answer if it solves my problem) I am sure a person experienced with this can surely help or suggest me to decide the tables structure. About the system:- There are tutors who create classes A tags based search approach is being followed Tag relations are created/edited when new tutors registers/edits profile data and when tutors create classes (this makes tutors and classes searcheable).For simplicity, let us consider only tutor name and class name are the fields which are matched against search keywords. In this example, I am considering - tutor "Sandeepan Nath" has created a class called "first class" tutor "Bob Cratchit" has created a class called "new class" Desired search results- AND logic to be appied on the search keywords and match against class and tutor data(class name + tutor name), in other words, All those classes be shown such that all the search terms are present in the class name or its tutor name. Example to be clear - Searching "first class" returns class with id_wc = 1. Working Searching "Sandeepan class" should also return class with id_wc = 1. Not working in System 2. Problem with profile editing and searching To tell in one sentence, I am facing a conflict between the ease of profile edition (edition of tag relations when tutor profiles are edited) and the ease of search logic. In the beginning, we had one table structure and search was easy but tag edition logic was very clumsy and unmaintainable(Check System 1 in the section below) . So we created separate tag relations tables to make profile edition simpler but search has become difficult. Please dump the tables so that you can run the search query I have given below and see the results. System 1 (previous system - search easy - profile edition difficult):- Only one table called All_Tag_Relations table had the all the tag relations. The tags table below is common to both systems 1 and 2. CREATE TABLE IF NOT EXISTS `all_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) unsigned DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `all_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`, `id_wc`) VALUES (1, 1, 1, NULL), (2, 2, 1, NULL), (3, 1, 1, 1), (4, 2, 1, 1), (5, 3, 1, 1), (6, 4, 1, 1), (7, 6, 2, NULL), (8, 7, 2, NULL), (9, 6, 2, 2), (10, 7, 2, 2), (11, 5, 2, 2), (12, 4, 2, 2); CREATE TABLE IF NOT EXISTS `tags` ( `id_tag` int(10) unsigned NOT NULL AUTO_INCREMENT, `tag` varchar(255) DEFAULT NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`), KEY `tag_4` (`tag`), FULLTEXT KEY `tag_5` (`tag`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; INSERT INTO `tags` (`id_tag`, `tag`) VALUES (1, 'Sandeepan'), (2, 'Nath'), (3, 'first'), (4, 'class'), (5, 'new'), (6, 'Bob'), (7, 'Cratchit'); Please note that for every class, the tag rels of its tutor have to be duplicated. Example, for class with id_wc=1, the tag rel records with id_tag_rel = 3 and 4 are actually extras if you compare with the tag rel records with id_tag_rel = 1 and 2. System 2 (present system - profile edition easy, search difficult) Two separate tables Tutors_Tag_Relations and Webclasses_Tag_Relations have the corresponding tag relations data (Please dump into a separate database)- CREATE TABLE IF NOT EXISTS `tutors_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `tutors_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`) VALUES (1, 1, 1), (2, 2, 1), (3, 6, 2), (4, 7, 2); CREATE TABLE IF NOT EXISTS `webclasses_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `webclasses_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`), KEY `id_tag` (`id_tag`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; INSERT INTO `webclasses_tag_relations` (`id_tag_rel`, `id_tag`, `id_tutor`, `id_wc`) VALUES (1, 3, 1, 1), (2, 4, 1, 1), (3, 5, 2, 2), (4, 4, 2, 2); CREATE TABLE IF NOT EXISTS `tags` ( `id_tag` int(10) unsigned NOT NULL AUTO_INCREMENT, `tag` varchar(255) DEFAULT NULL, PRIMARY KEY (`id_tag`), UNIQUE KEY `tag` (`tag`), KEY `id_tag` (`id_tag`), KEY `tag_2` (`tag`), KEY `tag_3` (`tag`), KEY `tag_4` (`tag`), FULLTEXT KEY `tag_5` (`tag`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=8 ; INSERT INTO `tags` (`id_tag`, `tag`) VALUES (1, 'Sandeepan'), (2, 'Nath'), (3, 'first'), (4, 'class'), (5, 'new'), (6, 'Bob'), (7, 'Cratchit'); CREATE TABLE IF NOT EXISTS `all_tag_relations` ( `id_tag_rel` int(10) NOT NULL AUTO_INCREMENT, `id_tag` int(10) unsigned NOT NULL DEFAULT '0', `id_tutor` int(10) DEFAULT NULL, `id_wc` int(10) unsigned DEFAULT NULL, PRIMARY KEY (`id_tag_rel`), KEY `All_Tag_Relations_FKIndex1` (`id_tag`), KEY `id_wc` (`id_wc`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1; insert into All_Tag_Relations select NULL,id_tag,id_tutor,NULL from Tutors_Tag_Relations; insert into All_Tag_Relations select NULL,id_tag,id_tutor,id_wc from Webclasses_Tag_Relations; Here you can see how easily tutor first name can be edited only in one place. But search has become really difficult, so on being advised to use a Temporary table, I am creating one at every search request, then dumping all the necessary data and then searching from it, I am creating this All_Tag_Relations table at search run time. Here I am just dumping all the data from the two tables Tutors_Tag_Relations and Webclasses_Tag_Relations. But, I am still not able to get classes if I search with tutor name This is the query which searches "first class". Running them on both the systems shows correct results (returns the class with id_wc = 1). SELECT wtagrels.id_wc,SUM(DISTINCT( wtagrels.id_tag =3)) AS key_1_total_matches, SUM(DISTINCT( wtagrels.id_tag =4)) AS key_2_total_matches FROM all_tag_relations AS wtagrels WHERE ( wtagrels.id_tag =3 OR wtagrels.id_tag =4 ) GROUP BY wtagrels.id_wc HAVING key_1_total_matches = 1 AND key_2_total_matches = 1 LIMIT 0, 20 But, searching for "Sandeepan class" works only with the 1st system Here is the query which searches "Sandeepan class" SELECT wtagrels.id_wc,SUM(DISTINCT( wtagrels.id_tag =1)) AS key_1_total_matches, SUM(DISTINCT( wtagrels.id_tag =4)) AS key_2_total_matches FROM all_tag_relations AS wtagrels WHERE ( wtagrels.id_tag =1 OR wtagrels.id_tag =4 ) GROUP BY wtagrels.id_wc HAVING key_1_total_matches = 1 AND key_2_total_matches = 1 LIMIT 0, 20 Can anybody alter this query and somehow do a proper join or something to get correct results. That solves my problem in a nice way. As you can figure out, the reason why it does not work in system 2 is that in system 1, for every class, one additional tag relation linking class and tutor name is present. e.g. for class first class, (records with id_tag_rel 3 and 4) which returns the class on searching with tutor name. So, you see the trade-off between the search and profile edition difficulty with the two systems. How do I overcome both. I have to reach a conclusion soon. So far my reasoning is it is definitely not good from a code maintainability point of view to follow the single tag rel table structure of system one, because in a real system while editing a field like "tutor qualifications", there can be as many records in tag rels table as there are words in qualification of a tutor (one word in a field = one tag relation). Now suppose a tutor has 100 classes. When he edits his qualification, all the tag rel rows corresponding to him are deleted and then as many copies are to be created (as per the new qualification data) as there are classes. This becomes particularly difficult if later more searcheable fields are added. The code cannot be robust. Is the best solution to follow system 2 (edition has to be in one table - no extra work for each and every class) and somehow re-create the all_tag_relations table like system 1 (from the tables tutor_tag_relations and webclasses_tag_relations), creating the extra tutor tag rels for each and every class by a tutor (which is currently missing in system 2's temporary all_tag_relations table). That would be a time consuming logic script. I doubt that table can be recreated without resorting to PHP sript (mysql alone cannot do that). But the problem is that running all this at search time will make search definitely slow. So, how do such systems work? How are such situations handled? I thought about we can run a cron which initiates that PHP script, say every 1 minute and replaces the existing all_tag_relations table as per new tag rels from tutor_tag_relations and webclasses_tag_relations (replaces means creates a new table, deletes the original and renames the new one as all_tag_relations, otherwise search won't work during that period- or is there any better way to that?). Anyway, the result would be that any changes by tutors will reflect in search in the next 1 minute and not immediately. An alternateve would be to initate that PHP script every time a tutor edits his profile. But here again, since many users may edit their profiles concurrently, will the creation of so many tables be a burden and can mysql make the server slow? Any help would be appreciated and working solution will be accepted as answer. Thanks, Sandeepan

    Read the article

  • Using javascript to limit survey choices to three unique values

    - by leanne
    I'm required to use a limited survey application, and have to adapt the provided code to meet more advanced functionality. I need to create a weighted ranking question, so users can select their top three choices and the data will go into the survey application and be accessible in the survey reports. The application only supports 2 types of questions (text fill & multiple choice) but I can alter the code, as long as it still sends the form data back to the survey application. The code is set up so it will show a drop-down menu of 0-3 for each option. Now I want to limit the user's choices so they can only select one "1" "2" or "3", three choices total. Ideally, if the user already had "2" selected for one option and they tried to select it for another option, it would set the first "2" as "0" or blank. Is this possible to do with javascript? If so, does anyone know of a site that might show code like this, or provide similar enough examples that I could adapt it? Current code here: <html> <head><title>Survey</title></head> <!-- Changes - remove br to put dropdown next to text for each item. Switch text & dropdown order for each item. - add comments to separate each question - removed blue title font - add instructions Goals - limit choices to one 1 one 2 and one 3, three choices total. --> <link href="---" rel="stylesheet" type="text/css"> <body bgcolor="#3c76a3"> <!-- TRANSITIONAL DIALOG BOX --> <table border="0" align="center" cellpadding="0" cellspacing="0" style="background-attachment: scroll; background-color: #3c76a3; background-repeat: no-repeat; background-position: left top;" bgcolor="#3c76a3" topmargin="0" marginwidth="0" marginheight="0" width="100%" height="100%"> <tr> <td> <table border="0" align="center" cellpadding="0" cellspacing="0" id="survey"> <tr> <td><p>&nbsp;</p> <!-- HEADER END --> <!-- FORM START TAG --><form name="survey" action="---" method="POST"> <FONT face="Verdana, Arial, Helvetica, sans-serif"> <b>survey</b><hr> <!-- 1 --> <input type=hidden name="Buy R.J. a DeLorean_multiple_answers" value="one"> <font size=2><select name="Buy R.J. a DeLorean" SIZE=1> <option value=""> <option value="0">0 <option value="1">1 <option value="2">2 <option value="3">3 </select></font> <input type="hidden" name="Buy R.J. a DeLorean_help" value=""> <b><font size=2>Buy R.J. a DeLorean</font></b> <hr size=1> <!-- 2 --> <input type=hidden name="Fill Lisa's office with marshmallows._multiple_answers" value="one"> <font size=2><select name="Fill Lisa's office with marshmallows." SIZE=1> <option value=""> <option value="0">0 <option value="1">1 <option value="2">2 <option value="3">3 </select></font> <input type="hidden" name="Fill Lisa's office with marshmallows._help" value=""> <b><font size=2>Fill Lisa's office with marshmallows.</font></b> <hr size=1> <!-- 3 --> <input type=hidden name="Install a beer fridge in everyone's filing cabinets._multiple_answers" value="one"> <font size=2><select name="Install a beer fridge in everyone's filing cabinets." SIZE=1> <option value=""> <option value="0">0 <option value="1">1 <option value="2">2 <option value="3">3 </select></font> <input type="hidden" name="Install a beer fridge in everyone's filing cabinets._help" value=""> <b><font size=2>Install a beer fridge in everyone's filing cabinets.</font></b> <hr size=1> <!-- 4 --> <input type=hidden name="Buy a company Cessna_multiple_answers" value="one"> <font size=2><select name="Buy a company Cessna" SIZE=1> <option value=""> <option value="0">0 <option value="1">1 <option value="2">2 <option value="3">3 </select></font> <input type="hidden" name="Buy a company Cessna_help" value=""> <b><font size=2>Buy a company Cessna</font></b><br> <hr size=1> <!-- 5 --> <input type=hidden name="Replace Conf2's chairs with miniature ponies._multiple_answers" value="one"> <font size=2><select name="Replace Conf2's chairs with miniature ponies." SIZE=1> <option value=""> <option value="0">0 <option value="1">1 <option value="2">2 <option value="3">3 </select></font> <input type="hidden" name="Replace Conf2's chairs with miniature ponies._help" value=""> <b><font size=2>Replace Conf2's chairs with miniature ponies.</font></b> <hr size=1> <input type="hidden" name="question_names" value="{Buy R.J. a DeLorean} {Fill Lisa's office with marshmallows.} {Install a beer fridge in everyone's filing cabinets.} {Buy a company Cessna} {Replace Conf2's chairs with miniature ponies.}"> <p align="right"><input type="image" BORDER=0 title="Save Changes" alt="Save Changes" src="---" name="button_save_changes"> <input type="hidden" name="showconfirm" value="T"> <input type="hidden" name="showresults" value="F"> <input type="hidden" name="preventdupesmemberid" value="T"> <input type="hidden" name="preventdupesip" value="F"> <input type="hidden" name="numberquestions" value="F"> <input type="hidden" name="destinationurl" value=""> <input type="hidden" name="original_survey_id" value="62"> <!-- FORM END TAG --></form> <!-- FOOTER START --> </td> </tr> </table> </td> </tr> </table> <!-- END HEADER --> </body> </html>

    Read the article

  • how to bind repeater control as message threading

    - by Shalin Gajjar
    i have crm application. i have one difficulties that how i bind repeater control as message threading. like first thread as question and second thread as answer of that question. if user asked multiple question then first,second,.. threads as question and.as it is like message chatting... for keeping data from database i use this stored procedure: set ANSI_NULLS ON set QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[ViewMessageThreads] (@inquiry_id varchar(50)) AS BEGIN SET NOCOUNT ON; select i.body as master_body, h.body as history_body, q.body as question_body, q.Created_date as question_timestamp, a.body as answer_body, a.Created_date as answer_timestamp, t.Type_name as user_type from tbl_Inquiry_History i left join tbl_Inquiry_master h on h.Inquiry_id=i.Inquiry_id left join tbl_Question q on q.Inquiry_id=i.Inquiry_id left join tbl_Answer a on a.Question_id=q.Inquiry_id left join tbl_User_master u on u.Id=i.User_id left join tbl_Login_master l on l.Id=u.User_id left join tbl_Type t on t.Id = l.type_id where (i.Inquiry_id=@inquiry_id) END and this gives me result as: master_body history_body question_body question_t.. answer_body answer_t.. user_type __________________________________________________________________________________________ question 1 NULL question 1 2005-03-14... NULL NULL User question 1 NULL question 2 2005-03-14... NULL NULL User and i include this design source of repeater: <asp:Repeater ID="Repeater_Inquiry_Messages" runat="server"> <ItemTemplate> <table id="ctl00_ContentPlaceHolder1_dl_ticketmsg" cellspacing="0" border="0" style="width:100%;border-collapse:collapse;"> <tbody><tr> <td style="background-color:#F5F5FF;"> <table cellpadding="0" cellspacing="0" border="0"> <tbody><tr> <td class="header"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_msg_no"><%#Container.ItemIndex+1 %></span></td> <td class="normaltext" valign="bottom"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_tagline">Message By <b><asp:Label ID="lbl_user_t" runat="server" Text='<%#Eval("user_type")%>'/></b> on <asp:Label ID="lbldatetime" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "question_timestamp","{0:ddd, dd MMMM yyyy}")%>'/></span></td> </tr> <tr> <td class="header"> &nbsp;</td> <td class="normaltext" valign="bottom"> <b>Message :</b><br> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_Label1"><asp:Label ID="lbl_inquiry_desc" runat="server" Text='<%#Eval("question_body")%>'/></span></td> </tr> </tbody></table> </td> </tr> </tbody></table> </ItemTemplate> <SeparatorTemplate> <table> <tr> <td style="height:3px"></td> </tr> </table> </SeparatorTemplate> <ItemTemplate> <table id="ctl00_ContentPlaceHolder1_dl_ticketmsg1" cellspacing="0" border="0" style="width:100%;border-collapse:collapse;"> <tbody><tr> <td style="background-color:#F5F5FF;"> <table cellpadding="0" cellspacing="0" border="0"> <tbody><tr> <td class="header"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg1_ctl00_lbl_msg_no"><%#Container.ItemIndex+1 %></span></td> <td class="normaltext" valign="bottom"> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg1_ctl00_lbl_tagline">Message By <b><asp:Label ID="Label1" runat="server" Text='<%#Eval("user_type")%>'/></b> on <asp:Label ID="Label2" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "answer_timestamp","{0:ddd, dd MMMM yyyy}")%>'/></span></td> </tr> <tr> <td class="header"> &nbsp;</td> <td class="normaltext" valign="bottom"> <b>Message :</b><br> <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg1_ctl00_Label1"><asp:Label ID="Label3" runat="server" Text='<%#Eval("answer_body")%>'/></span></td> </tr> <tr> <td class="header"> &nbsp;</td> <td class="normaltext" valign="bottom"> <b></b> </td> </tr> </tbody></table> </td> </tr> </tbody></table> </ItemTemplate> </asp:Repeater> how ever this gives me only question thread while i commenting up this second message thread. ----------------------------------------Updated--------------------------------------- please help me.. ---------------------------------------Updated---------------------------------------- Server Error in '/OmInvestmentStockMarketing_new' Application. Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: CS1026: ) expected Source Error: Line 162: <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_msg_no"><%#Container.ItemIndex+1 %></span></td> Line 163: <td class="normaltext" valign="bottom"> Line 164: <span id="ctl00_ContentPlaceHolder1_dl_ticketmsg_ctl00_lbl_tagline">Message By <b><asp:Label ID="lbl_user_t" runat="server" Text='<%# If(Eval("cargo2").ToString() Is "Admin", "You", Eval("cargo2"))%>'/></b> Line 165: on <asp:Label ID="lbldatetime" runat="server" Text='<%# DataBinder.Eval(Container.DataItem,"cargo1","{0:ddd, dd MMMM yyyy}")%>'/></span></td> Line 166: </tr> Source File: c:\Documents and Settings\Vishal\My Documents\Visual Studio 2005\WebSites\OmInvestmentStockMarketing_new\Admin\OWM_Inquiry.aspx Line: 164 Show Detailed Compiler Output: Show Complete Compilation Source: Version Information: Microsoft .NET Framework Version:2.0.50727.3053; ASP.NET Version:2.0.50727.3053

    Read the article

  • Know more about Cache Buffer Handle

    - by Liu Maclean(???)
    ??????«latch free:cache buffer handles???SQL????»?????cache buffer handle latch?????,?????????: “?????pin?buffer header???????buffer handle,??buffer handle?????????cache buffer handles?,??????cache buffer handles??????,???????cache???buffer handles,?????(reserved set)?????????????_db_handles_cached(???5)???,?????????????????SQL??????????????????????,????pin??????,????????handle,?????????5?cached buffer handles???handle????????????????,Oracle?????????????????pin?”????“?buffer,????????????????handle???db_block_buffers/processes,????_cursor_db_buffers_pinned???????cache buffer handles?????,??????,????????????SQL,????cache?buffer handles?????????,??????????????,???????????/?????” ????T.ASKMACLEAN.COM????,??????cache Buffer handle?????: cache buffer handle ??: ------------------------------ | Buffer state object | ------------------------------ | Place to hang the buffer | ------------------------------ | Consistent Get? | ------------------------------ | Proc Owning SO | ------------------------------ | Flags(RIR) | ------------------------------ ???? cache buffer handle SO: 70000046fdfe530, type: 24, owner: 70000041b018630, flag: INIT/-/-/0×00(buffer) (CR) PR: 70000048e92d148 FLG: 0×500000lock rls: 0, class bit: 0kcbbfbp: [BH: 7000001c7f069b0, LINK: 70000046fdfe570]where: kdswh02: kdsgrp, why: 0BH (7000001c7f069b0) file#: 12 rdba: 0×03061612 (12/398866) class: 1 ba: 7000001c70ee000set: 75 blksize: 8192 bsi: 0 set-flg: 0 pwbcnt: 0dbwrid: 2 obj: 66209 objn: 48710 tsn: 6 afn: 12hash: [700000485f12138,700000485f12138] lru: [70000025af67790,700000132f69ee0]lru-flags: hot_bufferckptq: [NULL] fileq: [NULL] objq: [700000114f5dd10,70000028bf5d620]use: [70000046fdfe570,70000046fdfe570] wait: [NULL]st: SCURRENT md: SHR tch: 0flags: affinity_lockLRBA: [0x0.0.0] HSCN: [0xffff.ffffffff] HSUB: [65535]where: kdswh02: kdsgrp, why: 0 # Example:#   (buffer) (CR) PR: 37290 FLG:    0#   kcbbfbp    : [BH: befd8, LINK: 7836c] (WAITING) Buffer handle (X$KCBBF) kernel cache, buffer buffer_handles Query x$kcbbf  – lists all the buffer handles ???? _db_handles             System-wide simultaneous buffer operations ,no of buffer handles_db_handles_cached      Buffer handles cached each process , no of processes  default 5_cursor_db_buffers_pinned  additional number of buffers a cursor can pin at once_session_kept_cursor_pins       Number of cursors pins to keep in a session When a buffer is pinned it is attached to buffer state object. ??? ???????? cache buffer handles latch ? buffer pin???: SESSION A : SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE    10.2.0.5.0      Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> create table test_cbc_handle(t1 int); Table created. SQL> insert into test_cbc_handle values(1); 1 row created. SQL> commit; Commit complete. SQL> select rowid from test_cbc_handle; ROWID ------------------ AAANO6AABAAAQZSAAA SQL> select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA';         T1 ----------          1 SQL> select addr,name from v$latch_parent where name='cache buffer handles'; ADDR             NAME ---------------- -------------------------------------------------- 00000000600140A8 cache buffer handles SQL> select to_number('00000000600140A8','xxxxxxxxxxxxxxxxxxxx') from dual; TO_NUMBER('00000000600140A8','XXXXXXXXXXXXXXXXXXXX') ----------------------------------------------------                                           1610694824 ??cache buffer handles????parent latch ??? child latch ???SESSION A hold ??????cache buffer handles parent latch ???? oradebug call kslgetl ??, kslgetl?oracle??get latch??? SQL> oradebug setmypid; Statement processed. SQL> oradebug call kslgetl 1610694824 1; Function returned 1 ?????SESSION B ???: SQL> select * from v$latchholder;        PID        SID LADDR            NAME                                                                   GETS ---------- ---------- ---------------- ---------------------------------------------------------------- ----------         15        141 00000000600140A8 cache buffer handles                                                    119 cache buffer handles latch ???session A hold??,????????acquire cache buffer handle latch SQL> select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA';         T1 ----------          1 ?????Server Process?????? read buffer, ????????"_db_handles_cached", ??process?cache 5? cache buffer handle ??"_db_handles_cached"=0,?process????5????cache buffer handle , ???? process ???pin buffer,???hold cache buffer handle latch??????cache buffer handle SQL> alter system set "_db_handles_cached"=0 scope=spfile; System altered. ????? shutdown immediate; startup; session A: SQL> oradebug setmypid; Statement processed. SQL> oradebug call kslgetl 1610694824 1; Function returned 1 session B: select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA'; session B hang!! WHY? SQL> oradebug setmypid; Statement processed. SQL> oradebug dump systemstate 266; Statement processed.   SO: 0x11b30b7b0, type: 2, owner: (nil), flag: INIT/-/-/0x00   (process) Oracle pid=22, calls cur/top: (nil)/0x11b453c38, flag: (0) -             int error: 0, call error: 0, sess error: 0, txn error 0   (post info) last post received: 0 0 0               last post received-location: No post               last process to post me: none               last post sent: 0 0 0               last post sent-location: No post               last process posted by me: none     (latch info) wait_event=0 bits=8       holding    (efd=4) 600140a8 cache buffer handles level=3   SO: 0x11b305810, type: 2, owner: (nil), flag: INIT/-/-/0x00   (process) Oracle pid=10, calls cur/top: 0x11b455ac0/0x11b450a58, flag: (0) -             int error: 0, call error: 0, sess error: 0, txn error 0   (post info) last post received: 0 0 0               last post received-location: No post               last process to post me: none               last post sent: 0 0 0               last post sent-location: No post               last process posted by me: none     (latch info) wait_event=0 bits=2         Location from where call was made: kcbzgs:       waiting for 600140a8 cache buffer handles level=3 FBD93353:000019F0    10   162 10005   1 KSL WAIT BEG [latch: cache buffer handles] 1610694824/0x600140a8 125/0x7d 0/0x0 FF936584:00002761    10   144 10005   1 KSL WAIT BEG [latch: cache buffer handles] 1610694824/0x600140a8 125/0x7d 0/0x0 PID=22 holding ??cache buffer handles latch PID=10 ?? cache buffer handles latch, ????"_db_handles_cached"=0 ?? process??????cache buffer handles ??systemstate???? kcbbfbp cache buffer handle??, ?? "_db_handles_cached"=0 ? cache buffer handles latch?hold ?? ????cache buffer handles latch , ??? buffer?pin?????????? session A exit session B: SQL> select * from v$latchholder; no rows selected SQL> insert into test_cbc_handle values(2); 1 row created. SQL> commit; Commit complete. SQL> SQL> select t1,rowid from test_cbc_handle;         T1 ROWID ---------- ------------------          1 AAANPAAABAAAQZSAAA          2 AAANPAAABAAAQZSAAB SQL> select spid,pid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); SPID                PID ------------ ---------- 19251                10 ? GDB ? SPID=19215 ?debug , ?? kcbrls ????breakpoint ??? ????release buffer [oracle@vrh8 ~]$ gdb $ORACLE_HOME/bin/oracle 19251 GNU gdb (GDB) Red Hat Enterprise Linux (7.0.1-37.el5) Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.  Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /s01/oracle/product/10.2.0.5/db_1/bin/oracle...(no debugging symbols found)...done. Attaching to program: /s01/oracle/product/10.2.0.5/db_1/bin/oracle, process 19251 Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libskgxp10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libskgxp10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libhasgen10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libhasgen10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libskgxn2.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libskgxn2.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocr10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocr10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocrb10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocrb10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocrutl10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocrutl10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libjox10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libjox10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libclsra10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libclsra10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libdbcfg10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libdbcfg10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libnnz10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libnnz10.so Reading symbols from /usr/lib64/libaio.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/libaio.so.1 Reading symbols from /lib64/libdl.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libdl.so.2 Reading symbols from /lib64/libm.so.6...(no debugging symbols found)...done. Loaded symbols for /lib64/libm.so.6 Reading symbols from /lib64/libpthread.so.0...(no debugging symbols found)...done. [Thread debugging using libthread_db enabled] Loaded symbols for /lib64/libpthread.so.0 Reading symbols from /lib64/libnsl.so.1...(no debugging symbols found)...done. Loaded symbols for /lib64/libnsl.so.1 Reading symbols from /lib64/libc.so.6...(no debugging symbols found)...done. Loaded symbols for /lib64/libc.so.6 Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib64/libnss_files.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libnss_files.so.2 0x00000035c000d940 in __read_nocancel () from /lib64/libpthread.so.0 (gdb) break kcbrls Breakpoint 1 at 0x10e5d24 session B: select * from test_cbc_handle where rowid='AAANPAAABAAAQZSAAA'; select hang !! GDB (gdb) c Continuing. Breakpoint 1, 0x00000000010e5d24 in kcbrls () (gdb) bt #0  0x00000000010e5d24 in kcbrls () #1  0x0000000002e87d25 in qertbFetchByUserRowID () #2  0x00000000030c62b8 in opifch2 () #3  0x00000000032327f0 in kpoal8 () #4  0x00000000013b7c10 in opiodr () #5  0x0000000003c3c9da in ttcpip () #6  0x00000000013b3144 in opitsk () #7  0x00000000013b60ec in opiino () #8  0x00000000013b7c10 in opiodr () #9  0x00000000013a92f8 in opidrv () #10 0x0000000001fa3936 in sou2o () #11 0x000000000072d40b in opimai_real () #12 0x000000000072d35c in main () SQL> oradebug setmypid; Statement processed. SQL> oradebug dump systemstate 266; Statement processed. ?????? kcbbfbp buffer cache handle ?  SO state object ? BH BUFFER HEADER  link???     ----------------------------------------     SO: 0x11b452348, type: 3, owner: 0x11b305810, flag: INIT/-/-/0x00     (call) sess: cur 11b41bd18, rec 0, usr 11b41bd18; depth: 0       ----------------------------------------       SO: 0x1182dc750, type: 24, owner: 0x11b452348, flag: INIT/-/-/0x00       (buffer) (CR) PR: 0x11b305810 FLG: 0x108000       class bit: (nil)       kcbbfbp: [BH: 0xf2fc69f8, LINK: 0x1182dc790]       where: kdswh05: kdsgrp, why: 0       BH (0xf2fc69f8) file#: 1 rdba: 0x00410652 (1/67154) class: 1 ba: 0xf297c000         set: 3 blksize: 8192 bsi: 0 set-flg: 2 pwbcnt: 272         dbwrid: 0 obj: 54208 objn: 54202 tsn: 0 afn: 1         hash: [f2fc47f8,1181f3038] lru: [f2fc6b88,f2fc6968]         obj-flags: object_ckpt_list         ckptq: [1182ecf38,1182ecf38] fileq: [1182ecf58,1182ecf58] objq: [108712a28,108712a28]         use: [1182dc790,1182dc790] wait: [NULL]         st: XCURRENT md: SHR tch: 12         flags: buffer_dirty gotten_in_current_mode block_written_once                 redo_since_read         LRBA: [0xc7.73b.0] HSCN: [0x0.1cbe52] HSUB: [1]         Using State Objects           ----------------------------------------           SO: 0x1182dc750, type: 24, owner: 0x11b452348, flag: INIT/-/-/0x00           (buffer) (CR) PR: 0x11b305810 FLG: 0x108000           class bit: (nil)           kcbbfbp: [BH: 0xf2fc69f8, LINK: 0x1182dc790]           where: kdswh05: kdsgrp, why: 0         buffer tsn: 0 rdba: 0x00410652 (1/67154)         scn: 0x0000.001cbe52 seq: 0x01 flg: 0x02 tail: 0xbe520601         frmt: 0x02 chkval: 0x0000 type: 0x06=trans data tab 0, row 0, @0x1f9a tl: 6 fb: --H-FL-- lb: 0x0  cc: 1 col  0: [ 2]  c1 02 tab 0, row 1, @0x1f94 tl: 6 fb: --H-FL-- lb: 0x2  cc: 1 col  0: [ 2]  c1 15 end_of_block_dump         (buffer) (CR) PR: 0x11b305810 FLG: 0x108000 st: XCURRENT md: SHR tch: 12 ? buffer header?status= XCURRENT mode=KCBMSHARE KCBMSHR     current share ?????  x$kcbbf ????? cache buffer handle SQL> select distinct KCBBPBH from  x$kcbbf ; KCBBPBH ---------------- 00 00000000F2FC69F8            ==>0xf2fc69f8 SQL> select * from x$kcbbf where kcbbpbh='00000000F2FC69F8'; ADDR                   INDX    INST_ID KCBBFSO_TYP KCBBFSO_FLG KCBBFSO_OWN ---------------- ---------- ---------- ----------- ----------- ----------------   KCBBFFLG    KCBBFCR    KCBBFCM KCBBFMBR         KCBBPBH ---------- ---------- ---------- ---------------- ---------------- KCBBPBF          X0KCBBPBH        X0KCBBPBF        X1KCBBPBH ---------------- ---------------- ---------------- ---------------- X1KCBBPBF        KCBBFBH            KCBBFWHR   KCBBFWHY ---------------- ---------------- ---------- ---------- 00000001182DC750        748          1          24           1 000000011B452348    1081344          1          0 00               00000000F2FC69F8 00000001182DC750 00               00000001182DC750 00 00000001182DC7F8 00                      583          0 SQL> desc x$kcbbf;  Name                                      Null?    Type  ----------------------------------------- -------- ----------------------------  ADDR                                               RAW(8)  INDX                                               NUMBER  INST_ID                                            NUMBER  KCBBFSO_TYP                                        NUMBER  KCBBFSO_FLG                                        NUMBER  KCBBFSO_OWN                                        RAW(8)  KCBBFFLG                                           NUMBER  KCBBFCR                                            NUMBER  KCBBFCM                                            NUMBER  KCBBFMBR                                           RAW(8)  KCBBPBH                                            RAW(8)  KCBBPBF                                            RAW(8)  X0KCBBPBH                                          RAW(8)  X0KCBBPBF                                          RAW(8)  X1KCBBPBH                                          RAW(8)  X1KCBBPBF                                          RAW(8)  KCBBFBH                                            RAW(8)  KCBBFWHR                                           NUMBER  KCBBFWHY                                           NUMBER gdb ?? ?process??????kcbrls release buffer? ???cache buffer handle??? SQL> select distinct KCBBPBH from  x$kcbbf ; KCBBPBH ---------------- 00

    Read the article

  • FreeBSD performance tuning. Sysctls, loader.conf, kernel

    - by SaveTheRbtz
    I wanted to share knowledge of tuning FreeBSD via sysctl.conf/loader.conf/KENCONF. It was initially based on Igor Sysoev's (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Tunings are for FreeBSD-CURRENT. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. sysctl.conf: # No zero mapping feature # May break wine # (There are also reports about broken samba3) #security.bsd.map_at_zero=0 # If you have really busy webserver with apache13 you may run out of processes #kern.maxproc=10000 # Same for servers with apache2 / Pound #kern.threads.max_threads_per_proc=4096 # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Can cause this on older kernels: # http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=10485760 # Mbuf 2k clusters (on amd64 7.2+ 25600 is default) # For such high value vm.kmem_size must be increased to 3G kern.ipc.nmbclusters=262144 # Jumbo pagesize(_SC_PAGESIZE) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=262144 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=65536 #kern.ipc.nmbjumbo16=32768 # For lower latency you can decrease scheduler's maximum time slice # default: stathz/10 (~ 13) #kern.sched.slice=1 # Increase max command-line length showed in `ps` (e.g for Tomcat/Java) # Default is PAGE_SIZE / 16 or 256 on x86 # This avoids commands to be presented as [executable] in `ps` # For more info see: http://www.freebsd.org/cgi/query-pr.cgi?pr=120749 kern.ps_arg_cache_limit=4096 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # On some systems HPET is almost 2 times faster than default ACPI-fast # Useful on systems with lots of clock_gettime / gettimeofday calls # See http://old.nabble.com/ACPI-fast-default-timecounter,-but-HPET-83--faster-td23248172.html # After revision 222222 HPET became default: http://svnweb.freebsd.org/base?view=revision&revision=222222 kern.timecounter.hardware=HPET # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # This is useful on Fat-Long-Pipes #net.inet.tcp.recvbuf_max=10485760 #net.inet.tcp.recvbuf_inc=65535 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This is useful on Fat-Long-Pipes #net.inet.tcp.sendbuf_max=10485760 #net.inet.tcp.sendbuf_inc=65535 # Turn off receive autotuning # You can play with it. #net.inet.tcp.recvbuf_auto=0 #net.inet.tcp.sendbuf_auto=0 # This should be enabled if you going to use big spaces (>64k) # Also timestamp field is useful when using syncookies net.inet.tcp.rfc1323=1 # Turn this off on high-speed, lossless connections (LAN 1Gbit+) # If you set it there is no need in TCP_NODELAY sockopt (see man tcp) net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) # This sysctl was removed in 10-CURRENT: # See: http://www.mail-archive.com/[email protected]/msg06178.html #net.inet.tcp.inflight.enable=0 # TCP slowstart algorithm tunings # We assuming we have very fast clients #net.inet.tcp.slowstart_flightsize=100 #net.inet.tcp.local_slowstart_flightsize=100 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't checked it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # # stops route cache degregation during a high-bandwidth flood # http://www.freebsd.org/doc/en/books/handbook/securing-freebsd.html #net.inet.ip.rtexpire=2 net.inet.ip.rtminexpire=2 net.inet.ip.rtmaxcache=1024 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # # There is also good example of sysctl.conf with comments: # http://www.thern.org/projects/sysctl.conf # # icmp may NOT rst, helpful for those pesky spoofed # icmp/udp floods that end up taking up your outgoing # bandwidth/ifqueue due to all that outgoing RST traffic. # #net.inet.tcp.icmp_may_rst=0 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # IPv6 Security # For more info see http://www.fosslc.org/drupal/content/security-implications-ipv6 # Disable Node info replies # To see this vulnerability in action run `ping6 -a sglAac ::1` or `ping6 -w ::1` on unprotected node net.inet6.icmp6.nodeinfo=0 # Turn on IPv6 privacy extensions # For more info see proposal http://unix.derkeiler.com/Mailing-Lists/FreeBSD/net/2008-06/msg00103.html net.inet6.ip6.use_tempaddr=1 net.inet6.ip6.prefer_tempaddr=1 # Disable ICMP redirect net.inet6.icmp6.rediraccept=0 # Disable acceptation of RA and auto linklocal generation if you don't use them #net.inet6.ip6.accept_rtadv=0 #net.inet6.ip6.auto_linklocal=0 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds # (default: 30000. RFC from 1979 recommends 120000) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=200000 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becomes lower) vfs.ufs.dirhash_maxmem=67108864 # Note from commit http://svn.freebsd.org/base/head@211031 : # For systems with RAID volumes and/or virtualization envirnments, where # read performance is very important, increasing this sysctl tunable to 32 # or even more will demonstratively yield additional performance benefits. vfs.read_max=32 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 # ZFS # Enable prefetch. Useful for sequential load type i.e fileserver. # FreeBSD sets vfs.zfs.prefetch_disable to 1 on any i386 systems and # on any amd64 systems with less than 4GB of avaiable memory # For additional info check this nabble thread http://old.nabble.com/Samba-read-speed-performance-tuning-td27964534.html #vfs.zfs.prefetch_disable=0 # On highload servers you may notice following message in dmesg: # "Approaching the limit on PV entries, consider increasing either the # vm.pmap.shpgperproc or the vm.pmap.pv_entry_max tunable" vm.pmap.shpgperproc=2048 loader.conf: # Accept filters for data, http and DNS requests # Useful when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Linux specific devices in /dev # As for 8.1 it only /dev/full #lindev_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load="YES" #siis_load="YES" # FreeBSD 8.2+ # New Congestion Control for FreeBSD # http://caia.swin.edu.au/urp/newtcp/tools/cc_chd-readme-0.1.txt # http://www.ietf.org/proceedings/78/slides/iccrg-5.pdf # Initial merge commit message http://www.mail-archive.com/[email protected]/msg31410.html #cc_chd_load="YES" # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # If your server has lots of swap (>4Gb) you should increase following value # according to http://lists.freebsd.org/pipermail/freebsd-hackers/2009-October/029616.html # Otherwise you'll be getting errors # "kernel: swap zone exhausted, increase kern.maxswzone" # kern.maxswzone="256M" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 10% of mem) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # FreeBSD 9+ # HPET "legacy route" support. It should allow HPET to work per-CPU # See http://www.mail-archive.com/[email protected]/msg03603.html #hint.atrtc.0.clock=0 #hint.attimer.0.clock=0 #hint.hpet.0.legacy_route=1 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=512 net.inet.tcp.syncache.cachelimit=65536 # Increased hostcache # Later host cache can be viewed via net.inet.tcp.hostcache.list hidden sysctl # Very useful for it's RTT RTTVAR # Must be power of two net.inet.tcp.hostcache.hashsize=65536 # hashsize * bucketlimit (which is 30 by default) # It allocates 255Mb (1966080*136) of RAM net.inet.tcp.hostcache.cachelimit=1966080 # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Disable ipfw deny all # Should be uncommented when there is a chance that # kernel and ipfw binary may be out-of sync on next reboot #net.inet.ip.fw.default_to_accept=1 # # SIFTR (Statistical Information For TCP Research) is a kernel module that # logs a range of statistics on active TCP connections to a log file. # See prerelease notes http://groups.google.com/group/mailing.freebsd.current/browse_thread/thread/b4c18be6cdce76e4 # and man 4 sitfr #siftr_load="YES" # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em/igb drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # sysctl dev.em.0.stats=1 ; dmesg # sysctl dev.em.0.debug=1 ; dmesg # Also after r209242 (-CURRENT) there is a separate sysctl for each stat variable; # Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.maxthreads=4 #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # # FreeBSD 9.x+ # Increase interface send queue length # See commit message http://svn.freebsd.org/viewvc/base?view=revision&revision=207554 #net.link.ifqmaxlen=1024 # Nicer boot logo =) loader_logo="beastie" And finally here is KERNCONF: # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU >= 4k # This req. is only for receiving data. # Read more in man zero_copy_sockets # Also this epic thread on kernel trap: # http://kerneltrap.org/node/6506 # Here Linus says that "anybody that does it that way (FreeBSD) is totally incompetent" #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE # There was stackoverflow found in KAME IPSec stack: # See http://secunia.com/advisories/43995/ # For quick workaround you can use `ipfw add deny proto ipcomp` options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL # On 8.1+ you can disable verbose to see blocked packets on ipfw0 interface. # Also there is no point in compiling verbose into the kernel, because # now there is net.inet.ip.fw.verbose tunable. #options IPFIREWALL_VERBOSE #options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron device amdtemp # Same for Intel processors device coretemp # man 4 cpuctl device cpuctl # CPU control pseudo-device # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # Debug & DTrace options KDB # Kernel debugger related code options KDB_TRACE # Print a stack trace for a panic options KDTRACE_FRAME # amd64-only(?) options KDTRACE_HOOKS # all architectures - enable general DTrace hooks #options DDB #options DDB_CTF # all architectures - kernel ELF linker loads CTF data # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (8.x+) #options TEKEN_UTF8 # FreeBSD 8.1+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html # (FYI: "resolution" is panic so use with caution) #options DEADLKRES # Increase maximum size of Raw I/O and sendfile(2) readahead #options MAXPHYS=(1024*1024) #options MAXBSIZE=(1024*1024) # For scheduler debug enable following option. # Debug will be available via `kern.sched.stats` sysctl # For more information see http://svnweb.freebsd.org/base/head/sys/conf/NOTES?view=markup #options SCHED_STATS If you are tuning network for maximum performance you may wish to play with ifconfig options like: # You can list all capabilities via `ifconfig -m` ifconfig [-]rxcsum [-]txcsum [-]tso [-]lro mtu In case you've enabled DDB in kernel config, you should edit your /etc/ddb.conf and add something like this to enable automatic reboot (and textdump as bonus): script kdb.enter.panic=textdump set; capture on; show pcpu; bt; ps; alltrace; capture off; call doadump; reset script kdb.enter.default=textdump set; capture on; bt; ps; capture off; call doadump; reset And do not forget to add ddb_enable="YES" to /etc/rc.conf Since FreeBSD 9 you can select to enable/disable flowcontrol on your NIC: # See http://en.wikipedia.org/wiki/Ethernet_flow_control and # http://www.mail-archive.com/[email protected]/msg07927.html for additional info ifconfig bge0 media auto mediaopt flowcontrol PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. FreeBSD WIP * Whats cooking for FreeBSD 7? * Whats cooking for FreeBSD 8? * Whats cooking for FreeBSD 9? So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

    Read the article

  • Setting up Mono/ASP.NET 4.0 on Apache2/Ubuntu: Virtual hosts?

    - by Dave
    I'm attempting to setup Mono/ASP.NET 4.0 on my Apache server (which is running on Ubuntu). Thus far, I've been following a few tutorials/scripts supplied here, and here. As of now: Apache 2.2 is installed (accessible via 'localhost') Mono 2.10.5 is installed However, I'm struggling to configure Apache correctly... apparently the Virtual Host setting isn't doing its job and invoking the mod_mono plugin, nor is it even pulling source from the proper directory. While the Virtual Host setting points to '\srv\www\localhost', it clearly is pulling content instead from 'var/www/', which I've found is the default DocumentRoot for virtual hosts. I can confirm: "/opt/mono-2.10/bin/mod-mono-server4" exists. Virtual hosts file is being read, since undoing the comment in the main httpd.conf changed the root directory from 'htdocs' to 'var/www/' The Mono installation is at least semi-capable of running ASP 4.0, as evidenced by running XSP, navigating to 0.0.0.0:8080/ and getting an ASP.NET style error page with "Mono ASP 4.0.x" at the bottom. Can anyone point out how to fix these configurations and get Mono linked up with Apache? Here are my configs and relevant information: /usr/local/apache2/conf/httpd.conf: # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo_log" # with ServerRoot set to "/usr/local/apache2" will be interpreted by the # server as "/usr/local/apache2/logs/foo_log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/usr/local/apache2" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin david@localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServerName localhost:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/usr/local/apache2/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/usr/local/apache2/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/usr/local/apache2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or 0 for unlimited # Default setting is to accept 200 Ranges #MaxRanges 0 # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> * /usr/local/apache2/conf/extra/httpd-vhosts.conf * # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *:80> ServerName localhost ServerAdmin david@localhost DocumentRoot "/srv/www/localhost" # MonoServerPath can be changed to specify which version of ASP.NET is hosted # mod-mono-server1 = ASP.NET 1.1 / mod-mono-server2 = ASP.NET 2.0 # For SUSE Linux Enterprise Mono Extension, uncomment the line below: # MonoServerPath localhost "/opt/novell/mono/bin/mod-mono-server2" # For Mono on openSUSE, uncomment the line below instead: MonoServerPath localhost "/opt/mono-2.10/bin/mod-mono-server4" # To obtain line numbers in stack traces you need to do two things: # 1) Enable Debug code generation in your page by using the Debug="true" # page directive, or by setting <compilation debug="true" /> in the # application's Web.config # 2) Uncomment the MonoDebug true directive below to enable mod_mono debugging MonoDebug localhost true # The MONO_IOMAP environment variable can be configured to provide platform abstraction # for file access in Linux. Valid values for MONO_IOMAP are: # case # drive # all # Uncomment the line below to alter file access behavior for the configured application MonoSetEnv localhost PATH=/opt/mono-2.10/bin:$PATH;LD_LIBRARY_PATH=/opt/mono-2.10/lib:$LD_LIBRARY_PATH; # # Additional environtment variables can be set for this server instance using # the MonoSetEnv directive. MonoSetEnv takes a string of 'name=value' pairs # separated by semicolons. For instance, to enable platform abstraction *and* # use Mono's old regular expression interpreter (which is slower, but has a # shorter setup time), uncomment the line below instead: # MonoSetEnv localhost MONO_IOMAP=all;MONO_OLD_RX=1 MonoApplications localhost "/:/srv/www/localhost" <Location "/"> Allow from all Order allow,deny MonoSetServerAlias localhost SetHandler mono SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary </Location> <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript </IfModule> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/usr/local/apache2/docs/dummy-host.example.com" ServerName dummy-host.example.com ServerAlias www.dummy-host.example.com ErrorLog "logs/dummy-host.example.com-error_log" CustomLog "logs/dummy-host.example.com-access_log" common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/usr/local/apache2/docs/dummy-host2.example.com" ServerName dummy-host2.example.com ErrorLog "logs/dummy-host2.example.com-error_log" CustomLog "logs/dummy-host2.example.com-access_log" common </VirtualHost> mono -V output: root@david-ubuntu:~# mono -V Mono JIT compiler version 2.6.7 (Debian 2.6.7-5ubuntu3) Copyright (C) 2002-2010 Novell, Inc and Contributors. www.mono-project.com TLS: __thread GC: Included Boehm (with typed GC and Parallel Mark) SIGSEGV: altstack Notifications: epoll Architecture: amd64 Disabled: none

    Read the article

  • Valgrind says "stack allocation," I say "heap allocation"

    - by Joel J. Adamson
    Dear Friends, I am trying to trace a segfault with valgrind. I get the following message from valgrind: ==3683== Conditional jump or move depends on uninitialised value(s) ==3683== at 0x4C277C5: sparse_mat_mat_kron (sparse.c:165) ==3683== by 0x4C2706E: rec_mating (rec.c:176) ==3683== by 0x401C1C: age_dep_iterate (age_dep.c:287) ==3683== by 0x4014CB: main (age_dep.c:92) ==3683== Uninitialised value was created by a stack allocation ==3683== at 0x401848: age_dep_init_params (age_dep.c:131) ==3683== ==3683== Conditional jump or move depends on uninitialised value(s) ==3683== at 0x4C277C7: sparse_mat_mat_kron (sparse.c:165) ==3683== by 0x4C2706E: rec_mating (rec.c:176) ==3683== by 0x401C1C: age_dep_iterate (age_dep.c:287) ==3683== by 0x4014CB: main (age_dep.c:92) ==3683== Uninitialised value was created by a stack allocation ==3683== at 0x401848: age_dep_init_params (age_dep.c:131) However, here's the offending line: /* allocate mating table */ age_dep_data->mtable = malloc (age_dep_data->geno * sizeof (double *)); if (age_dep_data->mtable == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); for (int j = 0; j < age_dep_data->geno; j++) { 131=> age_dep_data->mtable[j] = calloc (age_dep_data->geno, sizeof (double)); if (age_dep_data->mtable[j] == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); } What gives? I thought any call to malloc or calloc allocated heap space; there is no other variable allocated here, right? Is it possible there's another allocation going on (the offending stack allocation) that I'm not seeing? You asked to see the code, here goes: /* Copyright 2010 Joel J. Adamson <[email protected]> $Id: age_dep.c 1010 2010-04-21 19:19:16Z joel $ age_dep.c:main file Joel J. Adamson -- http://www.unc.edu/~adamsonj Servedio Lab University of North Carolina at Chapel Hill CB #3280, Coker Hall Chapel Hill, NC 27599-3280 This file is part of an investigation of age-dependent sexual selection. This code is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with haploid. If not, see <http://www.gnu.org/licenses/>. */ #include "age_dep.h" /* global variables */ extern struct argp age_dep_argp; /* global error message variables */ char * nullmsg = "Null pointer: %i"; /* error message for conversions: */ char * errmsg = "Representation error: %s"; /* precision for formatted output: */ const char prec[] = "%-#9.8f "; const size_t age_max = AGEMAX; /* maximum age of males */ static int keep_going_p = 1; int main (int argc, char ** argv) { /* often used counters: */ int i, j; /* read the command line */ struct age_dep_args age_dep_args = { NULL, NULL, NULL }; argp_parse (&age_dep_argp, argc, argv, 0, 0, &age_dep_args); /* set the parameters here: */ /* initialize an age_dep_params structure, set the members */ age_dep_params_t * params = malloc (sizeof (age_dep_params_t)); if (params == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); age_dep_init_params (params, &age_dep_args); /* initialize frequencies: this initializes a list of pointers to initial frqeuencies, terminated by a NULL pointer*/ params->freqs = age_dep_init (&age_dep_args); params->by = 0.0; /* what range of parameters do we want, and with what stepsize? */ /* we should go from 0 to half-of-theta with a step size of about 0.01 */ double from = 0.0; double to = params->theta / 2.0; double stepsz = 0.01; /* did you think I would spell the whole word? */ unsigned int numparts = floor(to / stepsz); do { #pragma omp parallel for private(i) firstprivate(params) \ shared(stepsz, numparts) for (i = 0; i < numparts; i++) { params->by = i * stepsz; int tries = 0; while (keep_going_p) { /* each time through, modify mfreqs and mating table, then go again */ keep_going_p = age_dep_iterate (params, ++tries); if (keep_going_p == ERANGE) error (ERANGE, ERANGE, "Failure to converge\n"); } fprintf (stdout, "%i iterations\n", tries); } /* for i < numparts */ params->freqs = params->freqs->next; } while (params->freqs->next != NULL); return 0; } inline double age_dep_pmate (double age_dep_t, unsigned int genot, double bp, double ba) { /* the probability of mating between these phenotypes */ /* the female preference depends on whether the female has the preference allele, the strength of preference (parameter bp) and the male phenotype (age_dep_t); if the female lacks the preference allele, then this will return 0, which is not quite accurate; it should return 1 */ return bits_isset (genot, CLOCI)? 1.0 - exp (-bp * age_dep_t) + ba: 1.0; } inline double age_dep_trait (int age, unsigned int genot, double by) { /* return the male trait, a function of the trait locus, age, the age-dependent scaling parameter (bx) and the males condition genotype */ double C; double T; /* get the male's condition genotype */ C = (double) bits_popcount (bits_extract (0, CLOCI, genot)); /* get his trait genotype */ T = bits_isset (genot, CLOCI + 1)? 1.0: 0.0; /* return the trait value */ return T * by * exp (age * C); } int age_dep_iterate (age_dep_params_t * data, unsigned int tries) { /* main driver routine */ /* number of bytes for female frequencies */ size_t geno = data->age_dep_data->geno; size_t genosize = geno * sizeof (double); /* female frequencies are equal to male frequencies at birth (before selection) */ double ffreqs[geno]; if (ffreqs == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); /* do not set! Use memcpy (we need to alter male frequencies (selection) without altering female frequencies) */ memmove (ffreqs, data->freqs->freqs[0], genosize); /* for (int i = 0; i < geno; i++) */ /* ffreqs[i] = data->freqs->freqs[0][i]; */ #ifdef PRMTABLE age_dep_pr_mfreqs (data); #endif /* PRMTABLE */ /* natural selection: */ age_dep_ns (data); /* normalized mating table with new frequencies */ age_dep_norm_mtable (ffreqs, data); #ifdef PRMTABLE age_dep_pr_mtable (data); #endif /* PRMTABLE */ double * newfreqs; /* mutate here */ /* i.e. get the new frequency of 0-year-olds using recombination; */ newfreqs = rec_mating (data->age_dep_data); /* return block */ { if (sim_stop_ck (data->freqs->freqs[0], newfreqs, GENO, TOL) == 0) { /* if we have converged, stop the iterations and handle the data */ age_dep_sim_out (data, stdout); return 0; } else if (tries > MAXTRIES) return ERANGE; else { /* advance generations */ for (int j = age_max - 1; j < 0; j--) memmove (data->freqs->freqs[j], data->freqs->freqs[j-1], genosize); /* advance the first age-class */ memmove (data->freqs->freqs[0], newfreqs, genosize); return 1; } } } void age_dep_ns (age_dep_params_t * data) { /* calculate the new frequency of genotypes given additive fitness and selection coefficient s */ size_t geno = data->age_dep_data->geno; double w[geno]; double wbar, dtheta, ttheta, dcond, tcond; double t, cond; /* fitness parameters */ double mu, nu; mu = data->wparams[0]; nu = data->wparams[1]; /* calculate fitness */ for (int j = 0; j < age_max; j++) { int i; for (i = 0; i < geno; i++) { /* calculate male trait: */ t = age_dep_trait(j, i, data->by); /* calculate condition: */ cond = (double) bits_popcount (bits_extract(0, CLOCI, i)); /* trait-based fitness term */ dtheta = data->theta - t; ttheta = (dtheta * dtheta) / (2.0 * nu * nu); /* condition-based fitness term */ dcond = CLOCI - cond; tcond = (dcond * dcond) / (2.0 * mu * mu); /* calculate male fitness */ w[i] = 1 + exp(-tcond) - exp(-ttheta); } /* calculate mean fitness */ /* as long as we calculate wbar before altering any values of freqs[], we're safe */ wbar = gen_mean (data->freqs->freqs[j], w, geno); for (i = 0; i < geno; i++) data->freqs->freqs[j][i] = (data->freqs->freqs[j][i] * w[i]) / wbar; } } void age_dep_norm_mtable (double * ffreqs, age_dep_params_t * params) { /* this function produces a single mating table that forms the input for recombination () */ /* i is female genotype; j is male genotype; k is male age */ int i,j,k; double norm_denom; double trait; size_t geno = params->age_dep_data->geno; for (i = 0; i < geno; i++) { double norm_mtable[geno]; /* initialize the denominator: */ norm_denom = 0.0; /* find the probability of mating and add it to the denominator */ for (j = 0; j < geno; j++) { /* initialize entry: */ norm_mtable[j] = 0.0; for (k = 0; k < age_max; k++) { trait = age_dep_trait (k, j, params->by); norm_mtable[j] += age_dep_pmate (trait, i, params->bp, params->ba) * (params->freqs->freqs)[k][j]; } norm_denom += norm_mtable[j]; } /* now calculate entry (i,j) */ for (j = 0; j < geno; j++) params->age_dep_data->mtable[i][j] = (ffreqs[i] * norm_mtable[j]) / norm_denom; } } My current suspicion is the array newfreqs: I can't memmove, memcpy or assign a stack variable then hope it will persist, can I? rec_mating() returns double *.

    Read the article

  • o write a C++ program to encrypt and decrypt certain codes.

    - by Amber
    Step 1: Write a function int GetText(char[],int); which fills a character array from a requested file. That is, the function should prompt the user to input the filename, and then read up to the number of characters given as the second argument, terminating when the number has been reached or when the end of file is encountered. The file should then be closed. The number of characters placed in the array is then returned as the value of the function. Every character in the file should be transferred to the array. Whitespace should not be removed. When testing, assume that no more than 5000 characters will be read. The function should be placed in a file called coding.cpp while the main will be in ass5.cpp. To enable the prototypes to be accessible, the file coding.h contains the prototypes for all the functions that are to be written in coding.cpp for this assignment. (You may write other functions. If they are called from any of the functions in coding.h, they must appear in coding.cpp where their prototypes should also appear. Do not alter coding.h. Any other functions written for this assignment should be placed, along with their prototypes, with the main function.) Step 2: Write a function int SimplifyText(char[],int); which simplifies the text in the first argument, an array containing the number of characters as given in the second argument, by converting all alphabetic characters to lower case, removing all non-alpha characters, and replacing multiple whitespace by one blank. Any leading whitespace at the beginning of the array should be removed completely. The resulting number of characters should be returned as the value of the function. Note that another array cannot appear in the function (as the file does not contain one). For example, if the array contained the 29 characters "The 39 Steps" by John Buchan (with the " appearing in the array), the simplified text would be the steps by john buchan of length 24. The array should not contain a null character at the end. Step 3: Using the file test.txt, test your program so far. You will need to write a function void PrintText(const char[],int,int); that prints out the contents of the array, whose length is the second argument, breaking the lines to exactly the number of characters in the third argument. Be warned that, if the array contains newlines (as it would when read from a file), lines will be broken earlier than the specified length. Step 4: Write a function void Caesar(const char[],int,char[],int); which takes the first argument array, with length given by the second argument and codes it into the third argument array, using the shift given in the fourth argument. The shift must be performed cyclicly and must also be able to handle negative shifts. Shifts exceeding 26 can be reduced by modulo arithmetic. (Is C++'s modulo operations on negative numbers a problem here?) Demonstrate that the test file, as simplified, can be coded and decoded using a given shift by listing the original input text, the simplified text (indicating the new length), the coded text and finally the decoded text. Step 5: The permutation cypher does not limit the character substitution to just a shift. In fact, each of the 26 characters is coded to one of the others in an arbitrary way. So, for example, a might become f, b become q, c become d, but a letter never remains the same. How the letters are rearranged can be specified using a seed to the random number generator. The code can then be decoded, if the decoder has the same random number generator and knows the seed. Write the function void Permute(const char[],int,char[],unsigned long); with the same first three arguments as Caesar above, with the fourth argument being the seed. The function will have to make up a permutation table as follows: To find what a is coded as, generate a random number from 1 to 25. Add that to a to get the coded letter. Mark that letter as used. For b, generate 1 to 24, then step that many letters after b, ignoring the used letter if encountered. For c, generate 1 to 23, ignoring a or b's codes if encountered. Wrap around at z. Here's an example, for only the 6 letters a, b, c, d, e, f. For the letter a, generate, from 1-5, a 2. Then a - c. c is marked as used. For the letter b, generate, from 1-4, a 3. So count 3 from b, skipping c (since it is marked as used) yielding the coding of b - f. Mark f as used. For c, generate, from 1-3, a 3. So count 3 from c, skipping f, giving a. Note the wrap at the last letter back to the first. And so on, yielding a - c b - f c - a d - b (it got a 2) e - d f - e Thus, for a given seed, a translation table is required. To decode a piece of text, we need the table generated to be re-arranged so that the right hand column is in order. In fact you can just store the table in the reverse way (e.g., if a gets encoded to c, put a opposite c is the table). Write a function called void DePermute(const char[],int,char[], unsigned long); to reverse the permutation cypher. Again, test your functions using the test file. At this point, any main program used to test these functions will not be required as part of the assignment. The remainder of the assignment uses some of these functions, and needs its own main function. When submitted, all the above functions will be tested by the marker's own main function. Step 6: If the seed number is unknown, decoding is difficult. Write a main program which: (i) reads in a piece of text using GetText; (ii) simplifies the text using SimplifyText; (iii) prints the text using PrintText; (iv) requests two letters to swap. If we think 'a' in the text should be 'q' we would type aq as input. The text would be modified by swapping the a's and q's, and the text reprinted. Repeat this last step until the user considers the text is decoded, when the input of the same letter twice (requesting a letter to be swapped with itself) terminates the program. Step 7: If we have a large enough sample of coded text, we can use knowledge of English to aid in finding the permutation. The first clue is in the frequency of occurrence of each letter. Write a function void LetterFreq(const char[],int,freq[]); which takes the piece of text given as the first two arguments (same as above) and returns in the 26 long array of structs (the third argument), the table of the frequency of the 26 letters. This frequency table should be in decreasing order of popularity. A simple Selection Sort will suffice. (This will be described in lectures.) When printed, this summary would look something like v x r s z j p t n c l h u o i b w d g e a q y k f m 168106 68 66 59 54 48 45 44 35 26 24 22 20 20 20 17 13 12 12 4 4 1 0 0 0 The formatting will require the use of input/output manipulators. See the header file for the definition of the struct called freq. Modify the program so that, before each swap is requested, the current frequency of the letters is printed. This does not require further calls to LetterFreq, however. You may use the traditional order of regular letter frequencies (E T A I O N S H R D L U) as a guide when deciding what characters to exchange. Step 8: The decoding process can be made more difficult if blank is also coded. That is, consider the alphabet to be 27 letters. Rewrite LetterFreq and your main program to handle blank as another character to code. In the above frequency order, space usually comes first.

    Read the article

  • Write a C++ program to encrypt and decrypt certain codes.

    - by Amber
    Step 1: Write a function int GetText(char[],int); which fills a character array from a requested file. That is, the function should prompt the user to input the filename, and then read up to the number of characters given as the second argument, terminating when the number has been reached or when the end of file is encountered. The file should then be closed. The number of characters placed in the array is then returned as the value of the function. Every character in the file should be transferred to the array. Whitespace should not be removed. When testing, assume that no more than 5000 characters will be read. The function should be placed in a file called coding.cpp while the main will be in ass5.cpp. To enable the prototypes to be accessible, the file coding.h contains the prototypes for all the functions that are to be written in coding.cpp for this assignment. (You may write other functions. If they are called from any of the functions in coding.h, they must appear in coding.cpp where their prototypes should also appear. Do not alter coding.h. Any other functions written for this assignment should be placed, along with their prototypes, with the main function.) Step 2: Write a function int SimplifyText(char[],int); which simplifies the text in the first argument, an array containing the number of characters as given in the second argument, by converting all alphabetic characters to lower case, removing all non-alpha characters, and replacing multiple whitespace by one blank. Any leading whitespace at the beginning of the array should be removed completely. The resulting number of characters should be returned as the value of the function. Note that another array cannot appear in the function (as the file does not contain one). For example, if the array contained the 29 characters "The 39 Steps" by John Buchan (with the " appearing in the array), the simplified text would be the steps by john buchan of length 24. The array should not contain a null character at the end. Step 3: Using the file test.txt, test your program so far. You will need to write a function void PrintText(const char[],int,int); that prints out the contents of the array, whose length is the second argument, breaking the lines to exactly the number of characters in the third argument. Be warned that, if the array contains newlines (as it would when read from a file), lines will be broken earlier than the specified length. Step 4: Write a function void Caesar(const char[],int,char[],int); which takes the first argument array, with length given by the second argument and codes it into the third argument array, using the shift given in the fourth argument. The shift must be performed cyclicly and must also be able to handle negative shifts. Shifts exceeding 26 can be reduced by modulo arithmetic. (Is C++'s modulo operations on negative numbers a problem here?) Demonstrate that the test file, as simplified, can be coded and decoded using a given shift by listing the original input text, the simplified text (indicating the new length), the coded text and finally the decoded text. Step 5: The permutation cypher does not limit the character substitution to just a shift. In fact, each of the 26 characters is coded to one of the others in an arbitrary way. So, for example, a might become f, b become q, c become d, but a letter never remains the same. How the letters are rearranged can be specified using a seed to the random number generator. The code can then be decoded, if the decoder has the same random number generator and knows the seed. Write the function void Permute(const char[],int,char[],unsigned long); with the same first three arguments as Caesar above, with the fourth argument being the seed. The function will have to make up a permutation table as follows: To find what a is coded as, generate a random number from 1 to 25. Add that to a to get the coded letter. Mark that letter as used. For b, generate 1 to 24, then step that many letters after b, ignoring the used letter if encountered. For c, generate 1 to 23, ignoring a or b's codes if encountered. Wrap around at z. Here's an example, for only the 6 letters a, b, c, d, e, f. For the letter a, generate, from 1-5, a 2. Then a - c. c is marked as used. For the letter b, generate, from 1-4, a 3. So count 3 from b, skipping c (since it is marked as used) yielding the coding of b - f. Mark f as used. For c, generate, from 1-3, a 3. So count 3 from c, skipping f, giving a. Note the wrap at the last letter back to the first. And so on, yielding a - c b - f c - a d - b (it got a 2) e - d f - e Thus, for a given seed, a translation table is required. To decode a piece of text, we need the table generated to be re-arranged so that the right hand column is in order. In fact you can just store the table in the reverse way (e.g., if a gets encoded to c, put a opposite c is the table). Write a function called void DePermute(const char[],int,char[], unsigned long); to reverse the permutation cypher. Again, test your functions using the test file. At this point, any main program used to test these functions will not be required as part of the assignment. The remainder of the assignment uses some of these functions, and needs its own main function. When submitted, all the above functions will be tested by the marker's own main function. Step 6: If the seed number is unknown, decoding is difficult. Write a main program which: (i) reads in a piece of text using GetText; (ii) simplifies the text using SimplifyText; (iii) prints the text using PrintText; (iv) requests two letters to swap. If we think 'a' in the text should be 'q' we would type aq as input. The text would be modified by swapping the a's and q's, and the text reprinted. Repeat this last step until the user considers the text is decoded, when the input of the same letter twice (requesting a letter to be swapped with itself) terminates the program. Step 7: If we have a large enough sample of coded text, we can use knowledge of English to aid in finding the permutation. The first clue is in the frequency of occurrence of each letter. Write a function void LetterFreq(const char[],int,freq[]); which takes the piece of text given as the first two arguments (same as above) and returns in the 26 long array of structs (the third argument), the table of the frequency of the 26 letters. This frequency table should be in decreasing order of popularity. A simple Selection Sort will suffice. (This will be described in lectures.) When printed, this summary would look something like v x r s z j p t n c l h u o i b w d g e a q y k f m 168106 68 66 59 54 48 45 44 35 26 24 22 20 20 20 17 13 12 12 4 4 1 0 0 0 The formatting will require the use of input/output manipulators. See the header file for the definition of the struct called freq. Modify the program so that, before each swap is requested, the current frequency of the letters is printed. This does not require further calls to LetterFreq, however. You may use the traditional order of regular letter frequencies (E T A I O N S H R D L U) as a guide when deciding what characters to exchange. Step 8: The decoding process can be made more difficult if blank is also coded. That is, consider the alphabet to be 27 letters. Rewrite LetterFreq and your main program to handle blank as another character to code. In the above frequency order, space usually comes first.

    Read the article

  • Reading input from a text file, omits the first and adds a nonsense value to the end?

    - by Greenhouse Gases
    Hi there When I input locations from a txt file I am getting a peculiar error where it seems to miss off the first entry, yet add a garbage entry to the end of the link list (it is designed to take the name, latitude and longitude for each location you will notice). I imagine this to be an issue with where it starts collecting the inputs and where it stops but I cant find the error!! It reads the first line correctly but then skips to the next before adding it because during testing for the bug it had no record of the first location Lisbon though whilst stepping into the method call it was reading it. Very bizarre but hopefully someone knows the issue. Here is firstly my header file: #include <string> struct locationNode { char nodeCityName [35]; double nodeLati; double nodeLongi; locationNode* Next; void CorrectCase() // Correct upper and lower case letters of input { int MAX_SIZE = 35; int firstLetVal = this->nodeCityName[0], letVal; int n = 1; // variable for name index from second letter onwards if((this->nodeCityName[0] >90) && (this->nodeCityName[0] < 123)) // First letter is lower case { firstLetVal = firstLetVal - 32; // Capitalise first letter this->nodeCityName[0] = firstLetVal; } while(n <= MAX_SIZE - 1) { if((this->nodeCityName[n] >= 65) && (this->nodeCityName[n] <= 90)) { letVal = this->nodeCityName[n] + 32; this->nodeCityName[n] = letVal; } n++; } //cityNameInput = this->nodeCityName; } }; class Locations { private: int size; public: Locations(){ }; // constructor for the class locationNode* Head; //int Add(locationNode* Item); }; And here is the file containing main: // U08221.cpp : main project file. #include "stdafx.h" #include "Locations.h" #include <iostream> #include <string> #include <fstream> using namespace std; int n = 0,x, locationCount = 0, MAX_SIZE = 35; string cityNameInput; char targetCity[35]; bool acceptedInput = false, userInputReq = true, match = false, nodeExists = false;// note: addLocation(), set to true to enable user input as opposed to txt file locationNode *start_ptr = NULL; // pointer to first entry in the list locationNode *temp, *temp2; // Part is a pointer to a new locationNode we can assign changing value followed by a call to Add locationNode *seek, *bridge; void setElementsNull(char cityParam[]) { int y=0, count =0; while(cityParam[y] != NULL) { y++; } while(y < MAX_SIZE) { cityParam[y] = NULL; y++; } } void addLocation() { temp = new locationNode; // declare the space for a pointer item and assign a temporary pointer to it if(!userInputReq) // bool that determines whether user input is required in adding the node to the list { cout << endl << "Enter the name of the location: "; cin >> temp->nodeCityName; temp->CorrectCase(); setElementsNull(temp->nodeCityName); cout << endl << "Please enter the latitude value for this location: "; cin >> temp->nodeLati; cout << endl << "Please enter the longitude value for this location: "; cin >> temp->nodeLongi; cout << endl; } temp->Next = NULL; //set to NULL as when one is added it is currently the last in the list and so can not point to the next if(start_ptr == NULL){ // if list is currently empty, start_ptr will point to this node start_ptr = temp; } else { temp2 = start_ptr; // We know this is not NULL - list not empty! while (temp2->Next != NULL) { temp2 = temp2->Next; // Move to next link in chain until reach end of list } temp2->Next = temp; } ++locationCount; // increment counter for number of records in list if(!userInputReq){ cout << "Location sucessfully added to the database! There are " << locationCount << " location(s) stored" << endl; } } void populateList(){ ifstream inputFile; inputFile.open ("locations.txt", ios::in); userInputReq = true; temp = new locationNode; // declare the space for a pointer item and assign a temporary pointer to it do { inputFile.get(temp->nodeCityName, 35, ' '); setElementsNull(temp->nodeCityName); inputFile >> temp->nodeLati; inputFile >> temp->nodeLongi; setElementsNull(temp->nodeCityName); if(temp->nodeCityName[0] == 10) //remove linefeed from input { for(int i = 0; temp->nodeCityName[i] != NULL; i++) { temp->nodeCityName[i] = temp->nodeCityName[i + 1]; } } addLocation(); } while(!inputFile.eof()); userInputReq = false; cout << "Successful!" << endl << "List contains: " << locationCount << " entries" << endl; cout << endl; inputFile.close(); } bool nodeExistTest(char targetCity[]) // see if entry is present in the database { match = false; seek = start_ptr; int letters = 0, letters2 = 0, x = 0, y = 0; while(targetCity[y] != NULL) { letters2++; y++; } while(x <= locationCount) // locationCount is number of entries currently in list { y=0, letters = 0; while(seek->nodeCityName[y] != NULL) // count letters in the current name { letters++; y++; } if(letters == letters2) // same amount of letters in the name { y = 0; while(y <= letters) // compare each letter against one another { if(targetCity[y] == seek->nodeCityName[y]) { match = true; y++; } else { match = false; y = letters + 1; // no match, terminate comparison } } } if(match) { x = locationCount + 1; //found match so terminate loop } else{ if(seek->Next != NULL) { bridge = seek; seek = seek->Next; x++; } else { x = locationCount + 1; // end of list so terminate loop } } } return match; } void deleteRecord() // complete this { int junction = 0; locationNode *place; cout << "Enter the name of the city you wish to remove" << endl; cin >> targetCity; setElementsNull(targetCity); if(nodeExistTest(targetCity)) //if this node does exist { if(seek == start_ptr) // if it is the first in the list { junction = 1; } if(seek != start_ptr && seek->Next == NULL) // if it is last in the list { junction = 2; } switch(junction) // will alter list accordingly dependant on where the searched for link is { case 1: start_ptr = start_ptr->Next; delete seek; --locationCount; break; case 2: place = seek; seek = bridge; delete place; --locationCount; break; default: bridge->Next = seek->Next; delete seek; --locationCount; break; } } else { cout << targetCity << "That entry does not currently exist" << endl << endl << endl; } } void searchDatabase() { char choice; cout << "Enter search term..." << endl; cin >> targetCity; if(nodeExistTest(targetCity)) { cout << "Entry: " << endl << endl; } else { cout << "Sorry, that city is not currently present in the list." << endl << "Would you like to add this city now Y/N?" << endl; cin >> choice; /*while(choice != ('Y' || 'N')) { cout << "Please enter a valid choice..." << endl; cin >> choice; }*/ switch(choice) { case 'Y': addLocation(); break; case 'N': break; default : cout << "Invalid choice" << endl; break; } } } void printDatabase() { temp = start_ptr; // set temp to the start of the list do { if (temp == NULL) { cout << "You have reached the end of the database" << endl; } else { // Display details for what temp points to at that stage cout << "Location : " << temp->nodeCityName << endl; cout << "Latitude : " << temp->nodeLati << endl; cout << "Longitude : " << temp->nodeLongi << endl; cout << endl; // Move on to next locationNode if one exists temp = temp->Next; } } while (temp != NULL); } void nameValidation(string name) { n = 0; // start from first letter x = name.size(); while(!acceptedInput) { if((name[n] >= 65) && (name[n] <= 122)) // is in the range of letters { while(n <= x - 1) { while((name[n] >=91) && (name[n] <=97)) // ERROR!! { cout << "Please enter a valid city name" << endl; cin >> name; } n++; } } else { cout << "Please enter a valid city name" << endl; cin >> name; } if(n <= x - 1) { acceptedInput = true; } } cityNameInput = name; } int main(array<System::String ^> ^args) { //main contains test calls to functions at present cout << "Populating list..."; populateList(); printDatabase(); deleteRecord(); printDatabase(); cin >> cityNameInput; } The text file contains this (ignore the names, they are just for testing!!): Lisbon 45 47 Fattah 45 47 Darius 42 49 Peter 45 27 Sarah 85 97 Michelle 45 47 John 25 67 Colin 35 87 Shiron 40 57 George 34 45 Sean 22 33 The output omits Lisbon, but adds on a garbage entry with nonsense values. Any ideas why? Thank you in advance.

    Read the article

  • Agile Development

    - by James Oloo Onyango
    Alot of literature has and is being written about agile developement and its surrounding philosophies. In my quest to find the best way to express the importance of agile methodologies, i have found Robert C. Martin's "A Satire Of Two Companies" to be both the most concise and thorough! Enjoy the read! Rufus Inc Project Kick Off Your name is Bob. The date is January 3, 2001, and your head still aches from the recent millennial revelry. You are sitting in a conference room with several managers and a group of your peers. You are a project team leader. Your boss is there, and he has brought along all of his team leaders. His boss called the meeting. "We have a new project to develop," says your boss's boss. Call him BB. The points in his hair are so long that they scrape the ceiling. Your boss's points are just starting to grow, but he eagerly awaits the day when he can leave Brylcream stains on the acoustic tiles. BB describes the essence of the new market they have identified and the product they want to develop to exploit this market. "We must have this new project up and working by fourth quarter October 1," BB demands. "Nothing is of higher priority, so we are cancelling your current project." The reaction in the room is stunned silence. Months of work are simply going to be thrown away. Slowly, a murmur of objection begins to circulate around the conference table.   His points give off an evil green glow as BB meets the eyes of everyone in the room. One by one, that insidious stare reduces each attendee to quivering lumps of protoplasm. It is clear that he will brook no discussion on this matter. Once silence has been restored, BB says, "We need to begin immediately. How long will it take you to do the analysis?" You raise your hand. Your boss tries to stop you, but his spitwad misses you and you are unaware of his efforts.   "Sir, we can't tell you how long the analysis will take until we have some requirements." "The requirements document won't be ready for 3 or 4 weeks," BB says, his points vibrating with frustration. "So, pretend that you have the requirements in front of you now. How long will you require for analysis?" No one breathes. Everyone looks around to see whether anyone has some idea. "If analysis goes beyond April 1, we have a problem. Can you finish the analysis by then?" Your boss visibly gathers his courage: "We'll find a way, sir!" His points grow 3 mm, and your headache increases by two Tylenol. "Good." BB smiles. "Now, how long will it take to do the design?" "Sir," you say. Your boss visibly pales. He is clearly worried that his 3 mms are at risk. "Without an analysis, it will not be possible to tell you how long design will take." BB's expression shifts beyond austere.   "PRETEND you have the analysis already!" he says, while fixing you with his vacant, beady little eyes. "How long will it take you to do the design?" Two Tylenol are not going to cut it. Your boss, in a desperate attempt to save his new growth, babbles: "Well, sir, with only six months left to complete the project, design had better take no longer than 3 months."   "I'm glad you agree, Smithers!" BB says, beaming. Your boss relaxes. He knows his points are secure. After a while, he starts lightly humming the Brylcream jingle. BB continues, "So, analysis will be complete by April 1, design will be complete by July 1, and that gives you 3 months to implement the project. This meeting is an example of how well our new consensus and empowerment policies are working. Now, get out there and start working. I'll expect to see TQM plans and QIT assignments on my desk by next week. Oh, and don't forget that your crossfunctional team meetings and reports will be needed for next month's quality audit." "Forget the Tylenol," you think to yourself as you return to your cubicle. "I need bourbon."   Visibly excited, your boss comes over to you and says, "Gosh, what a great meeting. I think we're really going to do some world shaking with this project." You nod in agreement, too disgusted to do anything else. "Oh," your boss continues, "I almost forgot." He hands you a 30-page document. "Remember that the SEI is coming to do an evaluation next week. This is the evaluation guide. You need to read through it, memorize it, and then shred it. It tells you how to answer any questions that the SEI auditors ask you. It also tells you what parts of the building you are allowed to take them to and what parts to avoid. We are determined to be a CMM level 3 organization by June!"   You and your peers start working on the analysis of the new project. This is difficult because you have no requirements. But from the 10-minute introduction given by BB on that fateful morning, you have some idea of what the product is supposed to do.   Corporate process demands that you begin by creating a use case document. You and your team begin enumerating use cases and drawing oval and stick diagrams. Philosophical debates break out among the team members. There is disagreement as to whether certain use cases should be connected with <<extends>> or <<includes>> relationships. Competing models are created, but nobody knows how to evaluate them. The debate continues, effectively paralyzing progress.   After a week, somebody finds the iceberg.com Web site, which recommends disposing entirely of <<extends>> and <<includes>> and replacing them with <<precedes>> and <<uses>>. The documents on this Web site, authored by Don Sengroiux, describes a method known as stalwart-analysis, which claims to be a step-by-step method for translating use cases into design diagrams. More competing use case models are created using this new scheme, but again, people can't agree on how to evaluate them. The thrashing continues. More and more, the use case meetings are driven by emotion rather than by reason. If it weren't for the fact that you don't have requirements, you'd be pretty upset by the lack of progress you are making. The requirements document arrives on February 15. And then again on February 20, 25, and every week thereafter. Each new version contradicts the previous one. Clearly, the marketing folks who are writing the requirements, empowered though they might be, are not finding consensus.   At the same time, several new competing use case templates have been proposed by the various team members. Each template presents its own particularly creative way of delaying progress. The debates rage on. On March 1, Prudence Putrigence, the process proctor, succeeds in integrating all the competing use case forms and templates into a single, all-encompassing form. Just the blank form is 15 pages long. She has managed to include every field that appeared on all the competing templates. She also presents a 159- page document describing how to fill out the use case form. All current use cases must be rewritten according to the new standard.   You marvel to yourself that it now requires 15 pages of fill-in-the-blank and essay questions to answer the question: What should the system do when the user presses Return? The corporate process (authored by L. E. Ott, famed author of "Holistic Analysis: A Progressive Dialectic for Software Engineers") insists that you discover all primary use cases, 87 percent of all secondary use cases, and 36.274 percent of all tertiary use cases before you can complete analysis and enter the design phase. You have no idea what a tertiary use case is. So in an attempt to meet this requirement, you try to get your use case document reviewed by the marketing department, which you hope will know what a tertiary use case is.   Unfortunately, the marketing folks are too busy with sales support to talk to you. Indeed, since the project started, you have not been able to get a single meeting with marketing, which has provided a never-ending stream of changing and contradictory requirements documents.   While one team has been spinning endlessly on the use case document, another team has been working out the domain model. Endless variations of UML documents are pouring out of this team. Every week, the model is reworked.   The team members can't decide whether to use <<interfaces>> or <<types>> in the model. A huge disagreement has been raging on the proper syntax and application of OCL. Others on the team just got back from a 5-day class on catabolism, and have been producing incredibly detailed and arcane diagrams that nobody else can fathom.   On March 27, with one week to go before analysis is to be complete, you have produced a sea of documents and diagrams but are no closer to a cogent analysis of the problem than you were on January 3. **** And then, a miracle happens.   **** On Saturday, April 1, you check your e-mail from home. You see a memo from your boss to BB. It states unequivocally that you are done with the analysis! You phone your boss and complain. "How could you have told BB that we were done with the analysis?" "Have you looked at a calendar lately?" he responds. "It's April 1!" The irony of that date does not escape you. "But we have so much more to think about. So much more to analyze! We haven't even decided whether to use <<extends>> or <<precedes>>!" "Where is your evidence that you are not done?" inquires your boss, impatiently. "Whaaa . . . ." But he cuts you off. "Analysis can go on forever; it has to be stopped at some point. And since this is the date it was scheduled to stop, it has been stopped. Now, on Monday, I want you to gather up all existing analysis materials and put them into a public folder. Release that folder to Prudence so that she can log it in the CM system by Monday afternoon. Then get busy and start designing."   As you hang up the phone, you begin to consider the benefits of keeping a bottle of bourbon in your bottom desk drawer. They threw a party to celebrate the on-time completion of the analysis phase. BB gave a colon-stirring speech on empowerment. And your boss, another 3 mm taller, congratulated his team on the incredible show of unity and teamwork. Finally, the CIO takes the stage to tell everyone that the SEI audit went very well and to thank everyone for studying and shredding the evaluation guides that were passed out. Level 3 now seems assured and will be awarded by June. (Scuttlebutt has it that managers at the level of BB and above are to receive significant bonuses once the SEI awards level 3.)   As the weeks flow by, you and your team work on the design of the system. Of course, you find that the analysis that the design is supposedly based on is flawedno, useless; no, worse than useless. But when you tell your boss that you need to go back and work some more on the analysis to shore up its weaker sections, he simply states, "The analysis phase is over. The only allowable activity is design. Now get back to it."   So, you and your team hack the design as best you can, unsure of whether the requirements have been properly analyzed. Of course, it really doesn't matter much, since the requirements document is still thrashing with weekly revisions, and the marketing department still refuses to meet with you.     The design is a nightmare. Your boss recently misread a book named The Finish Line in which the author, Mark DeThomaso, blithely suggested that design documents should be taken down to code-level detail. "If we are going to be working at that level of detail," you ask, "why don't we simply write the code instead?" "Because then you wouldn't be designing, of course. And the only allowable activity in the design phase is design!" "Besides," he continues, "we have just purchased a companywide license for Dandelion! This tool enables 'Round the Horn Engineering!' You are to transfer all design diagrams into this tool. It will automatically generate our code for us! It will also keep the design diagrams in sync with the code!" Your boss hands you a brightly colored shrinkwrapped box containing the Dandelion distribution. You accept it numbly and shuffle off to your cubicle. Twelve hours, eight crashes, one disk reformatting, and eight shots of 151 later, you finally have the tool installed on your server. You consider the week your team will lose while attending Dandelion training. Then you smile and think, "Any week I'm not here is a good week." Design diagram after design diagram is created by your team. Dandelion makes it very difficult to draw these diagrams. There are dozens and dozens of deeply nested dialog boxes with funny text fields and check boxes that must all be filled in correctly. And then there's the problem of moving classes between packages. At first, these diagram are driven from the use cases. But the requirements are changing so often that the use cases rapidly become meaningless. Debates rage about whether VISITOR or DECORATOR design patterns should be used. One developer refuses to use VISITOR in any form, claiming that it's not a properly object-oriented construct. Someone refuses to use multiple inheritance, since it is the spawn of the devil. Review meetings rapidly degenerate into debates about the meaning of object orientation, the definition of analysis versus design, or when to use aggregation versus association. Midway through the design cycle, the marketing folks announce that they have rethought the focus of the system. Their new requirements document is completely restructured. They have eliminated several major feature areas and replaced them with feature areas that they anticipate customer surveys will show to be more appropriate. You tell your boss that these changes mean that you need to reanalyze and redesign much of the system. But he says, "The analysis phase is system. But he says, "The analysis phase is over. The only allowable activity is design. Now get back to it."   You suggest that it might be better to create a simple prototype to show to the marketing folks and even some potential customers. But your boss says, "The analysis phase is over. The only allowable activity is design. Now get back to it." Hack, hack, hack, hack. You try to create some kind of a design document that might reflect the new requirements documents. However, the revolution of the requirements has not caused them to stop thrashing. Indeed, if anything, the wild oscillations of the requirements document have only increased in frequency and amplitude.   You slog your way through them.   On June 15, the Dandelion database gets corrupted. Apparently, the corruption has been progressive. Small errors in the DB accumulated over the months into bigger and bigger errors. Eventually, the CASE tool just stopped working. Of course, the slowly encroaching corruption is present on all the backups. Calls to the Dandelion technical support line go unanswered for several days. Finally, you receive a brief e-mail from Dandelion, informing you that this is a known problem and that the solution is to purchase the new version, which they promise will be ready some time next quarter, and then reenter all the diagrams by hand.   ****   Then, on July 1 another miracle happens! You are done with the design!   Rather than go to your boss and complain, you stock your middle desk drawer with some vodka.   **** They threw a party to celebrate the on-time completion of the design phase and their graduation to CMM level 3. This time, you find BB's speech so stirring that you have to use the restroom before it begins. New banners and plaques are all over your workplace. They show pictures of eagles and mountain climbers, and they talk about teamwork and empowerment. They read better after a few scotches. That reminds you that you need to clear out your file cabinet to make room for the brandy. You and your team begin to code. But you rapidly discover that the design is lacking in some significant areas. Actually, it's lacking any significance at all. You convene a design session in one of the conference rooms to try to work through some of the nastier problems. But your boss catches you at it and disbands the meeting, saying, "The design phase is over. The only allowable activity is coding. Now get back to it."   ****   The code generated by Dandelion is really hideous. It turns out that you and your team were using association and aggregation the wrong way, after all. All the generated code has to be edited to correct these flaws. Editing this code is extremely difficult because it has been instrumented with ugly comment blocks that have special syntax that Dandelion needs in order to keep the diagrams in sync with the code. If you accidentally alter one of these comments, the diagrams will be regenerated incorrectly. It turns out that "Round the Horn Engineering" requires an awful lot of effort. The more you try to keep the code compatible with Dandelion, the more errors Dandelion generates. In the end, you give up and decide to keep the diagrams up to date manually. A second later, you decide that there's no point in keeping the diagrams up to date at all. Besides, who has time?   Your boss hires a consultant to build tools to count the number of lines of code that are being produced. He puts a big thermometer graph on the wall with the number 1,000,000 on the top. Every day, he extends the red line to show how many lines have been added. Three days after the thermometer appears on the wall, your boss stops you in the hall. "That graph isn't growing quickly enough. We need to have a million lines done by October 1." "We aren't even sh-sh-sure that the proshect will require a m-million linezh," you blather. "We have to have a million lines done by October 1," your boss reiterates. His points have grown again, and the Grecian formula he uses on them creates an aura of authority and competence. "Are you sure your comment blocks are big enough?" Then, in a flash of managerial insight, he says, "I have it! I want you to institute a new policy among the engineers. No line of code is to be longer than 20 characters. Any such line must be split into two or more preferably more. All existing code needs to be reworked to this standard. That'll get our line count up!"   You decide not to tell him that this will require two unscheduled work months. You decide not to tell him anything at all. You decide that intravenous injections of pure ethanol are the only solution. You make the appropriate arrangements. Hack, hack, hack, and hack. You and your team madly code away. By August 1, your boss, frowning at the thermometer on the wall, institutes a mandatory 50-hour workweek.   Hack, hack, hack, and hack. By September 1st, the thermometer is at 1.2 million lines and your boss asks you to write a report describing why you exceeded the coding budget by 20 percent. He institutes mandatory Saturdays and demands that the project be brought back down to a million lines. You start a campaign of remerging lines. Hack, hack, hack, and hack. Tempers are flaring; people are quitting; QA is raining trouble reports down on you. Customers are demanding installation and user manuals; salespeople are demanding advance demonstrations for special customers; the requirements document is still thrashing, the marketing folks are complaining that the product isn't anything like they specified, and the liquor store won't accept your credit card anymore. Something has to give.    On September 15, BB calls a meeting. As he enters the room, his points are emitting clouds of steam. When he speaks, the bass overtones of his carefully manicured voice cause the pit of your stomach to roll over. "The QA manager has told me that this project has less than 50 percent of the required features implemented. He has also informed me that the system crashes all the time, yields wrong results, and is hideously slow. He has also complained that he cannot keep up with the continuous train of daily releases, each more buggy than the last!" He stops for a few seconds, visibly trying to compose himself. "The QA manager estimates that, at this rate of development, we won't be able to ship the product until December!" Actually, you think it's more like March, but you don't say anything. "December!" BB roars with such derision that people duck their heads as though he were pointing an assault rifle at them. "December is absolutely out of the question. Team leaders, I want new estimates on my desk in the morning. I am hereby mandating 65-hour work weeks until this project is complete. And it better be complete by November 1."   As he leaves the conference room, he is heard to mutter: "Empowermentbah!" * * * Your boss is bald; his points are mounted on BB's wall. The fluorescent lights reflecting off his pate momentarily dazzle you. "Do you have anything to drink?" he asks. Having just finished your last bottle of Boone's Farm, you pull a bottle of Thunderbird from your bookshelf and pour it into his coffee mug. "What's it going to take to get this project done? " he asks. "We need to freeze the requirements, analyze them, design them, and then implement them," you say callously. "By November 1?" your boss exclaims incredulously. "No way! Just get back to coding the damned thing." He storms out, scratching his vacant head.   A few days later, you find that your boss has been transferred to the corporate research division. Turnover has skyrocketed. Customers, informed at the last minute that their orders cannot be fulfilled on time, have begun to cancel their orders. Marketing is re-evaluating whether this product aligns with the overall goals of the company. Memos fly, heads roll, policies change, and things are, overall, pretty grim. Finally, by March, after far too many sixty-five hour weeks, a very shaky version of the software is ready. In the field, bug-discovery rates are high, and the technical support staff are at their wits' end, trying to cope with the complaints and demands of the irate customers. Nobody is happy.   In April, BB decides to buy his way out of the problem by licensing a product produced by Rupert Industries and redistributing it. The customers are mollified, the marketing folks are smug, and you are laid off.     Rupert Industries: Project Alpha   Your name is Robert. The date is January 3, 2001. The quiet hours spent with your family this holiday have left you refreshed and ready for work. You are sitting in a conference room with your team of professionals. The manager of the division called the meeting. "We have some ideas for a new project," says the division manager. Call him Russ. He is a high-strung British chap with more energy than a fusion reactor. He is ambitious and driven but understands the value of a team. Russ describes the essence of the new market opportunity the company has identified and introduces you to Jane, the marketing manager, who is responsible for defining the products that will address it. Addressing you, Jane says, "We'd like to start defining our first product offering as soon as possible. When can you and your team meet with me?" You reply, "We'll be done with the current iteration of our project this Friday. We can spare a few hours for you between now and then. After that, we'll take a few people from the team and dedicate them to you. We'll begin hiring their replacements and the new people for your team immediately." "Great," says Russ, "but I want you to understand that it is critical that we have something to exhibit at the trade show coming up this July. If we can't be there with something significant, we'll lose the opportunity."   "I understand," you reply. "I don't yet know what it is that you have in mind, but I'm sure we can have something by July. I just can't tell you what that something will be right now. In any case, you and Jane are going to have complete control over what we developers do, so you can rest assured that by July, you'll have the most important things that can be accomplished in that time ready to exhibit."   Russ nods in satisfaction. He knows how this works. Your team has always kept him advised and allowed him to steer their development. He has the utmost confidence that your team will work on the most important things first and will produce a high-quality product.   * * *   "So, Robert," says Jane at their first meeting, "How does your team feel about being split up?" "We'll miss working with each other," you answer, "but some of us were getting pretty tired of that last project and are looking forward to a change. So, what are you people cooking up?" Jane beams. "You know how much trouble our customers currently have . . ." And she spends a half hour or so describing the problem and possible solution. "OK, wait a second" you respond. "I need to be clear about this." And so you and Jane talk about how this system might work. Some of her ideas aren't fully formed. You suggest possible solutions. She likes some of them. You continue discussing.   During the discussion, as each new topic is addressed, Jane writes user story cards. Each card represents something that the new system has to do. The cards accumulate on the table and are spread out in front of you. Both you and Jane point at them, pick them up, and make notes on them as you discuss the stories. The cards are powerful mnemonic devices that you can use to represent complex ideas that are barely formed.   At the end of the meeting, you say, "OK, I've got a general idea of what you want. I'm going to talk to the team about it. I imagine they'll want to run some experiments with various database structures and presentation formats. Next time we meet, it'll be as a group, and we'll start identifying the most important features of the system."   A week later, your nascent team meets with Jane. They spread the existing user story cards out on the table and begin to get into some of the details of the system. The meeting is very dynamic. Jane presents the stories in the order of their importance. There is much discussion about each one. The developers are concerned about keeping the stories small enough to estimate and test. So they continually ask Jane to split one story into several smaller stories. Jane is concerned that each story have a clear business value and priority, so as she splits them, she makes sure that this stays true.   The stories accumulate on the table. Jane writes them, but the developers make notes on them as needed. Nobody tries to capture everything that is said; the cards are not meant to capture everything but are simply reminders of the conversation.   As the developers become more comfortable with the stories, they begin writing estimates on them. These estimates are crude and budgetary, but they give Jane an idea of what the story will cost.   At the end of the meeting, it is clear that many more stories could be discussed. It is also clear that the most important stories have been addressed and that they represent several months worth of work. Jane closes the meeting by taking the cards with her and promising to have a proposal for the first release in the morning.   * * *   The next morning, you reconvene the meeting. Jane chooses five cards and places them on the table. "According to your estimates, these cards represent about one perfect team-week's worth of work. The last iteration of the previous project managed to get one perfect team-week done in 3 real weeks. If we can get these five stories done in 3 weeks, we'll be able to demonstrate them to Russ. That will make him feel very comfortable about our progress." Jane is pushing it. The sheepish look on her face lets you know that she knows it too. You reply, "Jane, this is a new team, working on a new project. It's a bit presumptuous to expect that our velocity will be the same as the previous team's. However, I met with the team yesterday afternoon, and we all agreed that our initial velocity should, in fact, be set to one perfectweek for every 3 real-weeks. So you've lucked out on this one." "Just remember," you continue, "that the story estimates and the story velocity are very tentative at this point. We'll learn more when we plan the iteration and even more when we implement it."   Jane looks over her glasses at you as if to say "Who's the boss around here, anyway?" and then smiles and says, "Yeah, don't worry. I know the drill by now."Jane then puts 15 more cards on the table. She says, "If we can get all these cards done by the end of March, we can turn the system over to our beta test customers. And we'll get good feedback from them."   You reply, "OK, so we've got our first iteration defined, and we have the stories for the next three iterations after that. These four iterations will make our first release."   "So," says Jane, can you really do these five stories in the next 3 weeks?" "I don't know for sure, Jane," you reply. "Let's break them down into tasks and see what we get."   So Jane, you, and your team spend the next several hours taking each of the five stories that Jane chose for the first iteration and breaking them down into small tasks. The developers quickly realize that some of the tasks can be shared between stories and that other tasks have commonalities that can probably be taken advantage of. It is clear that potential designs are popping into the developers' heads. From time to time, they form little discussion knots and scribble UML diagrams on some cards.   Soon, the whiteboard is filled with the tasks that, once completed, will implement the five stories for this iteration. You start the sign-up process by saying, "OK, let's sign up for these tasks." "I'll take the initial database generation." Says Pete. "That's what I did on the last project, and this doesn't look very different. I estimate it at two of my perfect workdays." "OK, well, then, I'll take the login screen," says Joe. "Aw, darn," says Elaine, the junior member of the team, "I've never done a GUI, and kinda wanted to try that one."   "Ah, the impatience of youth," Joe says sagely, with a wink in your direction. "You can assist me with it, young Jedi." To Jane: "I think it'll take me about three of my perfect workdays."   One by one, the developers sign up for tasks and estimate them in terms of their own perfect workdays. Both you and Jane know that it is best to let the developers volunteer for tasks than to assign the tasks to them. You also know full well that you daren't challenge any of the developers' estimates. You know these people, and you trust them. You know that they are going to do the very best they can.   The developers know that they can't sign up for more perfect workdays than they finished in the last iteration they worked on. Once each developer has filled his or her schedule for the iteration, they stop signing up for tasks.   Eventually, all the developers have stopped signing up for tasks. But, of course, tasks are still left on the board.   "I was worried that that might happen," you say, "OK, there's only one thing to do, Jane. We've got too much to do in this iteration. What stories or tasks can we remove?" Jane sighs. She knows that this is the only option. Working overtime at the beginning of a project is insane, and projects where she's tried it have not fared well.   So Jane starts to remove the least-important functionality. "Well, we really don't need the login screen just yet. We can simply start the system in the logged-in state." "Rats!" cries Elaine. "I really wanted to do that." "Patience, grasshopper." says Joe. "Those who wait for the bees to leave the hive will not have lips too swollen to relish the honey." Elaine looks confused. Everyone looks confused. "So . . .," Jane continues, "I think we can also do away with . . ." And so, bit by bit, the list of tasks shrinks. Developers who lose a task sign up for one of the remaining ones.   The negotiation is not painless. Several times, Jane exhibits obvious frustration and impatience. Once, when tensions are especially high, Elaine volunteers, "I'll work extra hard to make up some of the missing time." You are about to correct her when, fortunately, Joe looks her in the eye and says, "When once you proceed down the dark path, forever will it dominate your destiny."   In the end, an iteration acceptable to Jane is reached. It's not what Jane wanted. Indeed, it is significantly less. But it's something the team feels that can be achieved in the next 3 weeks.   And, after all, it still addresses the most important things that Jane wanted in the iteration. "So, Jane," you say when things had quieted down a bit, "when can we expect acceptance tests from you?" Jane sighs. This is the other side of the coin. For every story the development team implements,   Jane must supply a suite of acceptance tests that prove that it works. And the team needs these long before the end of the iteration, since they will certainly point out differences in the way Jane and the developers imagine the system's behaviour.   "I'll get you some example test scripts today," Jane promises. "I'll add to them every day after that. You'll have the entire suite by the middle of the iteration."   * * *   The iteration begins on Monday morning with a flurry of Class, Responsibilities, Collaborators sessions. By midmorning, all the developers have assembled into pairs and are rapidly coding away. "And now, my young apprentice," Joe says to Elaine, "you shall learn the mysteries of test-first design!"   "Wow, that sounds pretty rad," Elaine replies. "How do you do it?" Joe beams. It's clear that he has been anticipating this moment. "OK, what does the code do right now?" "Huh?" replied Elaine, "It doesn't do anything at all; there is no code."   "So, consider our task; can you think of something the code should do?" "Sure," Elaine said with youthful assurance, "First, it should connect to the database." "And thereupon, what must needs be required to connecteth the database?" "You sure talk weird," laughed Elaine. "I think we'd have to get the database object from some registry and call the Connect() method. "Ah, astute young wizard. Thou perceives correctly that we requireth an object within which we can cacheth the database object." "Is 'cacheth' really a word?" "It is when I say it! So, what test can we write that we know the database registry should pass?" Elaine sighs. She knows she'll just have to play along. "We should be able to create a database object and pass it to the registry in a Store() method. And then we should be able to pull it out of the registry with a Get() method and make sure it's the same object." "Oh, well said, my prepubescent sprite!" "Hay!" "So, now, let's write a test function that proves your case." "But shouldn't we write the database object and registry object first?" "Ah, you've much to learn, my young impatient one. Just write the test first." "But it won't even compile!" "Are you sure? What if it did?" "Uh . . ." "Just write the test, Elaine. Trust me." And so Joe, Elaine, and all the other developers began to code their tasks, one test case at a time. The room in which they worked was abuzz with the conversations between the pairs. The murmur was punctuated by an occasional high five when a pair managed to finish a task or a difficult test case.   As development proceeded, the developers changed partners once or twice a day. Each developer got to see what all the others were doing, and so knowledge of the code spread generally throughout the team.   Whenever a pair finished something significant whether a whole task or simply an important part of a task they integrated what they had with the rest of the system. Thus, the code base grew daily, and integration difficulties were minimized.   The developers communicated with Jane on a daily basis. They'd go to her whenever they had a question about the functionality of the system or the interpretation of an acceptance test case.   Jane, good as her word, supplied the team with a steady stream of acceptance test scripts. The team read these carefully and thereby gained a much better understanding of what Jane expected the system to do. By the beginning of the second week, there was enough functionality to demonstrate to Jane. She watched eagerly as the demonstration passed test case after test case. "This is really cool," Jane said as the demonstration finally ended. "But this doesn't seem like one-third of the tasks. Is your velocity slower than anticipated?"   You grimace. You'd been waiting for a good time to mention this to Jane but now she was forcing the issue. "Yes, unfortunately, we are going more slowly than we had expected. The new application server we are using is turning out to be a pain to configure. Also, it takes forever to reboot, and we have to reboot it whenever we make even the slightest change to its configuration."   Jane eyes you with suspicion. The stress of last Monday's negotiations had still not entirely dissipated. She says, "And what does this mean to our schedule? We can't slip it again, we just can't. Russ will have a fit! He'll haul us all into the woodshed and ream us some new ones."   You look Jane right in the eyes. There's no pleasant way to give someone news like this. So you just blurt out, "Look, if things keep going like they're going, we're not going to be done with everything by next Friday. Now it's possible that we'll figure out a way to go faster. But, frankly, I wouldn't depend on that. You should start thinking about one or two tasks that could be removed from the iteration without ruining the demonstration for Russ. Come hell or high water, we are going to give that demonstration on Friday, and I don't think you want us to choose which tasks to omit."   "Aw forchrisakes!" Jane barely manages to stifle yelling that last word as she stalks away, shaking her head. Not for the first time, you say to yourself, "Nobody ever promised me project management would be easy." You are pretty sure it won't be the last time, either.   Actually, things went a bit better than you had hoped. The team did, in fact, have to drop one task from the iteration, but Jane had chosen wisely, and the demonstration for Russ went without a hitch. Russ was not impressed with the progress, but neither was he dismayed. He simply said, "This is pretty good. But remember, we have to be able to demonstrate this system at the trade show in July, and at this rate, it doesn't look like you'll have all that much to show." Jane, whose attitude had improved dramatically with the completion of the iteration, responded to Russ by saying, "Russ, this team is working hard, and well. When July comes around, I am confident that we'll have something significant to demonstrate. It won't be everything, and some of it may be smoke and mirrors, but we'll have something."   Painful though the last iteration was, it had calibrated your velocity numbers. The next iteration went much better. Not because your team got more done than in the last iteration but simply because the team didn't have to remove any tasks or stories in the middle of the iteration.   By the start of the fourth iteration, a natural rhythm has been established. Jane, you, and the team know exactly what to expect from one another. The team is running hard, but the pace is sustainable. You are confident that the team can keep up this pace for a year or more.   The number of surprises in the schedule diminishes to near zero; however, the number of surprises in the requirements does not. Jane and Russ frequently look over the growing system and make recommendations or changes to the existing functionality. But all parties realize that these changes take time and must be scheduled. So the changes do not cause anyone's expectations to be violated. In March, there is a major demonstration of the system to the board of directors. The system is very limited and is not yet in a form good enough to take to the trade show, but progress is steady, and the board is reasonably impressed.   The second release goes even more smoothly than the first. By now, the team has figured out a way to automate Jane's acceptance test scripts. The team has also refactored the design of the system to the point that it is really easy to add new features and change old ones. The second release was done by the end of June and was taken to the trade show. It had less in it than Jane and Russ would have liked, but it did demonstrate the most important features of the system. Although customers at the trade show noticed that certain features were missing, they were very impressed overall. You, Russ, and Jane all returned from the trade show with smiles on your faces. You all felt as though this project was a winner.   Indeed, many months later, you are contacted by Rufus Inc. That company had been working on a system like this for its internal operations. Rufus has canceled the development of that system after a death-march project and is negotiating to license your technology for its environment.   Indeed, things are looking up!

    Read the article

  • Failed to Install Xdebug

    - by burnt1ce
    've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. I've used both "zend_extention" and "zend_extention_ts" to specify the path of the xdebug dll. I ensured that my apache server restarted and used the latest change of my php.ini by executing "httpd -k restart". Can anyone provide any suggestions in getting xdebug to show up? Here are the contents of my php.ini file. [PHP] ;;;;;;;;;;;;;;;;;;; ; About php.ini ; ;;;;;;;;;;;;;;;;;;; ; PHP's initialization file, generally called php.ini, is responsible for ; configuring many of the aspects of PHP's behavior. ; PHP attempts to find and load this configuration from a number of locations. ; The following is a summary of its search order: ; 1. SAPI module specific location. ; 2. The PHPRC environment variable. (As of PHP 5.2.0) ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0) ; 4. Current working directory (except CLI) ; 5. The web server's directory (for SAPI modules), or directory of PHP ; (otherwise in Windows) ; 6. The directory from the --with-config-file-path compile time option, or the ; Windows directory (C:\windows or C:\winnt) ; See the PHP docs for more specific information. ; http://php.net/configuration.file ; The syntax of the file is extremely simple. Whitespace and Lines ; beginning with a semicolon are silently ignored (as you probably guessed). ; Section headers (e.g. [Foo]) are also silently ignored, even though ; they might mean something in the future. ; Directives following the section heading [PATH=/www/mysite] only ; apply to PHP files in the /www/mysite directory. Directives ; following the section heading [HOST=www.example.com] only apply to ; PHP files served from www.example.com. Directives set in these ; special sections cannot be overridden by user-defined INI files or ; at runtime. Currently, [PATH=] and [HOST=] sections only work under ; CGI/FastCGI. ; http://php.net/ini.sections ; Directives are specified using the following syntax: ; directive = value ; Directive names are *case sensitive* - foo=bar is different from FOO=bar. ; Directives are variables used to configure PHP or PHP extensions. ; There is no name validation. If PHP can't find an expected ; directive because it is not set or is mistyped, a default value will be used. ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a ; previously set variable or directive (e.g. ${foo}) ; Expressions in the INI file are limited to bitwise operators and parentheses: ; | bitwise OR ; ^ bitwise XOR ; & bitwise AND ; ~ bitwise NOT ; ! boolean NOT ; Boolean flags can be turned on using the values 1, On, True or Yes. ; They can be turned off using the values 0, Off, False or No. ; An empty string can be denoted by simply not writing anything after the equal ; sign, or by using the None keyword: ; foo = ; sets foo to an empty string ; foo = None ; sets foo to an empty string ; foo = "None" ; sets foo to the string 'None' ; If you use constants in your value, and these constants belong to a ; dynamically loaded extension (either a PHP extension or a Zend extension), ; you may only use these constants *after* the line that loads the extension. ;;;;;;;;;;;;;;;;;;; ; About this file ; ;;;;;;;;;;;;;;;;;;; ; PHP comes packaged with two INI files. One that is recommended to be used ; in production environments and one that is recommended to be used in ; development environments. ; php.ini-production contains settings which hold security, performance and ; best practices at its core. But please be aware, these settings may break ; compatibility with older or less security conscience applications. We ; recommending using the production ini in production and testing environments. ; php.ini-development is very similar to its production variant, except it's ; much more verbose when it comes to errors. We recommending using the ; development version only in development environments as errors shown to ; application users can inadvertently leak otherwise secure information. ;;;;;;;;;;;;;;;;;;; ; Quick Reference ; ;;;;;;;;;;;;;;;;;;; ; The following are all the settings which are different in either the production ; or development versions of the INIs with respect to PHP's default behavior. ; Please see the actual settings later in the document for more details as to why ; we recommend these changes in PHP's behavior. ; allow_call_time_pass_reference ; Default Value: On ; Development Value: Off ; Production Value: Off ; display_errors ; Default Value: On ; Development Value: On ; Production Value: Off ; display_startup_errors ; Default Value: Off ; Development Value: On ; Production Value: Off ; error_reporting ; Default Value: E_ALL & ~E_NOTICE ; Development Value: E_ALL | E_STRICT ; Production Value: E_ALL & ~E_DEPRECATED ; html_errors ; Default Value: On ; Development Value: On ; Production value: Off ; log_errors ; Default Value: Off ; Development Value: On ; Production Value: On ; magic_quotes_gpc ; Default Value: On ; Development Value: Off ; Production Value: Off ; max_input_time ; Default Value: -1 (Unlimited) ; Development Value: 60 (60 seconds) ; Production Value: 60 (60 seconds) ; output_buffering ; Default Value: Off ; Development Value: 4096 ; Production Value: 4096 ; register_argc_argv ; Default Value: On ; Development Value: Off ; Production Value: Off ; register_long_arrays ; Default Value: On ; Development Value: Off ; Production Value: Off ; request_order ; Default Value: None ; Development Value: "GP" ; Production Value: "GP" ; session.bug_compat_42 ; Default Value: On ; Development Value: On ; Production Value: Off ; session.bug_compat_warn ; Default Value: On ; Development Value: On ; Production Value: Off ; session.gc_divisor ; Default Value: 100 ; Development Value: 1000 ; Production Value: 1000 ; session.hash_bits_per_character ; Default Value: 4 ; Development Value: 5 ; Production Value: 5 ; short_open_tag ; Default Value: On ; Development Value: Off ; Production Value: Off ; track_errors ; Default Value: Off ; Development Value: On ; Production Value: Off ; url_rewriter.tags ; Default Value: "a=href,area=href,frame=src,form=,fieldset=" ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry" ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry" ; variables_order ; Default Value: "EGPCS" ; Development Value: "GPCS" ; Production Value: "GPCS" ;;;;;;;;;;;;;;;;;;;; ; php.ini Options ; ;;;;;;;;;;;;;;;;;;;; ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini" ;user_ini.filename = ".user.ini" ; To disable this feature set this option to empty value ;user_ini.filename = ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes) ;user_ini.cache_ttl = 300 ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;; ; Enable the PHP scripting language engine under Apache. ; http://php.net/engine engine = On ; This directive determines whether or not PHP will recognize code between ; <? and ?> tags as PHP source which should be processed as such. It's been ; recommended for several years that you not use the short tag "short cut" and ; instead to use the full <?php and ?> tag combination. With the wide spread use ; of XML and use of these tags by other languages, the server can become easily ; confused and end up parsing the wrong code in the wrong context. But because ; this short cut has been a feature for such a long time, it's currently still ; supported for backwards compatibility, but we recommend you don't use them. ; Default Value: On ; Development Value: Off ; Production Value: Off ; http://php.net/short-open-tag short_open_tag = Off ; Allow ASP-style <% %> tags. ; http://php.net/asp-tags asp_tags = Off ; The number of significant digits displayed in floating point numbers. ; http://php.net/precision precision = 14 ; Enforce year 2000 compliance (will cause problems with non-compliant browsers) ; http://php.net/y2k-compliance y2k_compliance = On ; Output buffering is a mechanism for controlling how much output data ; (excluding headers and cookies) PHP should keep internally before pushing that ; data to the client. If your application's output exceeds this setting, PHP ; will send that data in chunks of roughly the size you specify. ; Turning on this setting and managing its maximum buffer size can yield some ; interesting side-effects depending on your application and web server. ; You may be able to send headers and cookies after you've already sent output ; through print or echo. You also may see performance benefits if your server is ; emitting less packets due to buffered output versus PHP streaming the output ; as it gets it. On production servers, 4096 bytes is a good setting for performance ; reasons. ; Note: Output buffering can also be controlled via Output Buffering Control ; functions. ; Possible Values: ; On = Enabled and buffer is unlimited. (Use with caution) ; Off = Disabled ; Integer = Enables the buffer and sets its maximum size in bytes. ; Note: This directive is hardcoded to Off for the CLI SAPI ; Default Value: Off ; Development Value: 4096 ; Production Value: 4096 ; http://php.net/output-buffering output_buffering = Off ; You can redirect all of the output of your scripts to a function. For ; example, if you set output_handler to "mb_output_handler", character ; encoding will be transparently converted to the specified encoding. ; Setting any output handler automatically turns on output buffering. ; Note: People who wrote portable scripts should not depend on this ini ; directive. Instead, explicitly set the output handler using ob_start(). ; Using this ini directive may cause problems unless you know what script ; is doing. ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" ; and you cannot use both "ob_gzhandler" and "zlib.output_compression". ; Note: output_handler must be empty if this is set 'On' !!!! ; Instead you must use zlib.output_handler. ; http://php.net/output-handler ;output_handler = ; Transparent output compression using the zlib library ; Valid values for this option are 'off', 'on', or a specific buffer size ; to be used for compression (default is 4KB) ; Note: Resulting chunk size may vary due to nature of compression. PHP ; outputs chunks that are few hundreds bytes each as a result of ; compression. If you prefer a larger chunk size for better ; performance, enable output_buffering in addition. ; Note: You need to use zlib.output_handler instead of the standard ; output_handler, or otherwise the output will be corrupted. ; http://php.net/zlib.output-compression zlib.output_compression = Off ; http://php.net/zlib.output-compression-level ;zlib.output_compression_level = -1 ; You cannot specify additional output handlers if zlib.output_compression ; is activated here. This setting does the same as output_handler but in ; a different order. ; http://php.net/zlib.output-handler ;zlib.output_handler = ; Implicit flush tells PHP to tell the output layer to flush itself ; automatically after every output block. This is equivalent to calling the ; PHP function flush() after each and every call to print() or echo() and each ; and every HTML block. Turning this option on has serious performance ; implications and is generally recommended for debugging purposes only. ; http://php.net/implicit-flush ; Note: This directive is hardcoded to On for the CLI SAPI implicit_flush = Off ; The unserialize callback function will be called (with the undefined class' ; name as parameter), if the unserializer finds an undefined class ; which should be instantiated. A warning appears if the specified function is ; not defined, or if the function doesn't include/implement the missing class. ; So only set this entry, if you really want to implement such a ; callback-function. unserialize_callback_func = ; When floats & doubles are serialized store serialize_precision significant ; digits after the floating point. The default value ensures that when floats ; are decoded with unserialize, the data will remain the same. serialize_precision = 100 ; This directive allows you to enable and disable warnings which PHP will issue ; if you pass a value by reference at function call time. Passing values by ; reference at function call time is a deprecated feature which will be removed ; from PHP at some point in the near future. The acceptable method for passing a ; value by reference to a function is by declaring the reference in the functions ; definition, not at call time. This directive does not disable this feature, it ; only determines whether PHP will warn you about it or not. These warnings ; should enabled in development environments only. ; Default Value: On (Suppress warnings) ; Development Value: Off (Issue warnings) ; Production Value: Off (Issue warnings) ; http://php.net/allow-call-time-pass-reference allow_call_time_pass_reference = On ; Safe Mode ; http://php.net/safe-mode safe_mode = Off ; By default, Safe Mode does a UID compare check when ; opening files. If you want to relax this to a GID compare, ; then turn on safe_mode_gid. ; http://php.net/safe-mode-gid safe_mode_gid = Off ; When safe_mode is on, UID/GID checks are bypassed when ; including files from this directory and its subdirectories. ; (directory must also be in include_path or full path must ; be used when including) ; http://php.net/safe-mode-include-dir safe_mode_include_dir = ; When safe_mode is on, only executables located in the safe_mode_exec_dir ; will be allowed to be executed via the exec family of functions. ; http://php.net/safe-mode-exec-dir safe_mode_exec_dir = ; Setting certain environment variables may be a potential security breach. ; This directive contains a comma-delimited list of prefixes. In Safe Mode, ; the user may only alter environment variables whose names begin with the ; prefixes supplied here. By default, users will only be able to set ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). ; Note: If this directive is empty, PHP will let the user modify ANY ; environment variable! ; http://php.net/safe-mode-allowed-env-vars safe_mode_allowed_env_vars = PHP_ ; This directive contains a comma-delimited list of environment variables that ; the end user won't be able to change using putenv(). These variables will be ; protected even if safe_mode_allowed_env_vars is set to allow to change them. ; http://php.net/safe-mode-protected-env-vars safe_mode_protected_env_vars = LD_LIBRARY_PATH ; open_basedir, if set, limits all file operations to the defined directory ; and below. This directive makes most sense if used in a per-directory ; or per-virtualhost web server configuration file. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/open-basedir ;open_basedir = ; This directive allows you to disable certain functions for security reasons. ; It receives a comma-delimited list of function names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/disable-functions disable_functions = ; This directive allows you to disable certain classes for security reasons. ; It receives a comma-delimited list of class names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ; http://php.net/disable-classes disable_classes = ; Colors for Syntax Highlighting mode. Anything that's acceptable in ; <span style="color: ???????"> would work. ; http://php.net/syntax-highlighting ;highlight.string = #DD0000 ;highlight.comment = #FF9900 ;highlight.keyword = #007700 ;highlight.bg = #FFFFFF ;highlight.default = #0000BB ;highlight.html = #000000 ; If enabled, the request will be allowed to complete even if the user aborts ; the request. Consider enabling it if executing long requests, which may end up ; being interrupted by the user or a browser timing out. PHP's default behavior ; is to disable this feature. ; http://php.net/ignore-user-abort ;ignore_user_abort = On ; Determines the size of the realpath cache to be used by PHP. This value should ; be increased on systems where PHP opens many files to reflect the quantity of ; the file operations performed. ; http://php.net/realpath-cache-size ;realpath_cache_size = 16k ; Duration of time, in seconds for which to cache realpath information for a given ; file or directory. For systems with rarely changing files, consider increasing this ; value. ; http://php.net/realpath-cache-ttl ;realpath_cache_ttl = 120 ;;;;;;;;;;;;;;;;; ; Miscellaneous ; ;;;;;;;;;;;;;;;;; ; Decides whether PHP may expose the fact that it is installed on the server ; (e.g. by adding its signature to the Web server header). It is no security ; threat in any way, but it makes it possible to determine whether you use PHP ; on your server or not. ; http://php.net/expose-php expose_php = On ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; ; Maximum execution time of each script, in seconds ; http://php.net/max-execution-time ; Note: This directive is hardcoded to 0 for the CLI SAPI max_execution_time = 60 ; Maximum amount of time each script may spend parsing request data. It's a good ; idea to limit this time on productions servers in order to eliminate unexpectedly ; long running scripts. ; Note: This directive is hardcoded to -1 for the CLI SAPI ; Default Value: -1 (Unlimited) ; Development Value: 60 (60 seconds) ; Production Value: 60 (60 seconds) ; http://php.net/max-input-time max_input_time = 60 ; Maximum input variable nesting level ; http://php.net/max-input-nesting-level ;max_input_nesting_level = 64 ; Maximum amount of memory a script may consume (128MB) ; http://php.net/memory-limit memory_limit = 128M ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; This directive informs PHP of which errors, warnings and notices you would like ; it to take action for. The recommended way of setting values for this ; directive is through the use of the error level constants and bitwise ; operators. The error level constants are below here for convenience as well as ; some common settings and their meanings. ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT ; those related to E_NOTICE and E_STRICT, which together cover best practices and ; recommended coding standards in PHP. For performance reasons, this is the ; recommend error reporting setting. Your production server shouldn't be wasting ; resources complaining about best practices and coding standards. That's what ; development servers and development settings are for. ; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This ; means it pretty much reports everything which is exactly what you want during ; development and early testing. ; ; Error Level Constants: ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 6.0.0) ; E_ERROR - fatal run-time errors ; E_RECOVERABLE_ERROR - almost fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often result ; from a bug in your code, but it's possible that it was ; intentional (e.g., using an uninitialized variable and ; relying on the fact it's automatically initialized to an ; empty string) ; E_STRICT - run-time notices, enable to have PHP suggest changes ; to your code which will ensure the best interoperability ; and forward compatibility of your code ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; E_DEPRECATED - warn about code that will not work in future versions ; of PHP ; E_USER_DEPRECATED - user-generated deprecation warnings ; ; Common Values: ; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.) ; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices) ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors) ; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.) ; Default Value: E_ALL & ~E_NOTICE ; Development Value: E_ALL | E_STRICT ; Production Value: E_ALL & ~E_DEPRECATED ; http://php.net/error-reporting error_reporting = E_ALL & ~E_NOTICE & ~E_DEPRECATED ; This directive controls whether or not and where PHP will output errors, ; notices and warnings too. Error output is very useful during development, but ; it could be very dangerous in production environments. Depending on the code ; which is triggering the error, sensitive information could potentially leak ; out of your application such as database usernames and passwords or worse. ; It's recommended that errors be logged on production servers rather than ; having the errors sent to STDOUT. ; Possible Values: ; Off = Do not display any errors ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!) ; On or stdout = Display errors to STDOUT ; Default Value: On ; Development Value: On ; Production Value: Off ; http://php.net/display-errors display_errors = On ; The display of errors which occur during PHP's startup sequence are handled ; separately from display_errors. PHP's default behavior is to suppress those ; errors from clients. Turning the display of startup errors on can be useful in ; debugging configuration problems. But, it's strongly recommended that you ; leave this setting off on production servers. ; Default Value: Off ; Development Value: On ; Production Value: Off ; http://php.net/display-startup-errors display_startup_errors = On ; Besides displaying errors, PHP can also log errors to locations such as a ; server-specific log, STDERR, or a location specified by the error_log ; directive found below. While errors should not be displayed on productions ; servers they should still be monitored and logging is a great way to do that. ; Default Value: Off ; Development Value: On ; Production Value: On ; http://php.net/log-errors log_errors = Off ; Set maximum length of log_errors. In error_log information about the source is ; added. The default is 1024 and 0 allows to not apply any maximum length at all. ; http://php.net/log-errors-max-len log_errors_max_len = 1024 ; Do not log repeated messages. Repeated errors must occur in same file on same ; line unless ignore_repeated_source is set true. ; http://php.net/ignore-repeated-errors ignore_repeated_errors = Off ; Ignore source of message when ignoring repeated messages. When this setting ; is On you will not log errors with repeated messages from different files or ; source lines. ; http://php.net/ignore-repeated-source ignore_repeated_source = Off ; If this parameter is set to Off, then memory leaks will not be shown (on ; stdout or in the log). This has only effect in a debug compile, and if ; error reporting includes E_WARNING in the allowed list ; http://php.net/report-memleaks report_memleaks = On ; This setting is on by default. ;report_zend_debug = 0 ; Store the last error/warning message in $php_errormsg (boolean). Setting this value ; to On can assist in debugging and is appropriate for development servers. It should ; however be disabled on production servers. ; Default Value: Off ; Development Value: On ; Production Value: Off ; http://php.net/track-errors track_errors = Off ; Turn off normal error reporting and emit XML-RPC error XML ; http://php.net/xmlrpc-errors ;xmlrpc_errors = 0 ; An XML-RPC faultCode ;xmlrpc_error_number = 0 ; When PHP displays or logs an error, it has the capability of inserting html ; links to documentation related to that error. This directive controls whether ; those HTML links appear in error messages or not. For performance and security ; reasons, it's recommended you disable this on production servers. ; Note: This directive is hardcoded to Off for the CLI SAPI ; Default Value: On ; Development Value: On ; Production value: Off ; http://php.net/html-errors html_errors = On ; If html_errors is set On PHP produces clickable error messages that direct ; to a page describing the error or function causing the error in detail. ; You can download a copy of the PHP manual from http://php.net/docs ; and change docref_root to the base URL of your local copy including the ; leading '/'. You must also specify the file extension being used including ; the dot. PHP's default behavior is to leave these settings empty. ; Note: Never use this feature for production boxes. ; http://php.net/docref-root ; Examples ;docref_root = "/phpmanual/" ; http://php.net/docref-ext ;docref_ext = .html ; String to output before an error message. PHP's default behavior is to leave ; this setting blank. ; http://php.net/error-prepend-string ; Example: ;error_prepend_string = "<font color=#ff0000>" ; String to output after an error message. PHP's default behavior is to leave ; this setting blank. ; http://php.net/error-append-string ; Example: ;error_append_string = "</font>" ; Log errors to specified file. PHP's default behavior is to leave this value ; empty. ; http://php.net/error-log ; Example: ;error_log = php_errors.log ; Log errors to syslog (Event Log on NT, not valid in Windows 95). ;error_log = syslog ;error_log = "C:\xampp\apache\logs\php_error.log" ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; ; Note - track_vars is ALWAYS enabled ; The separator used in PHP generated URLs to separate arguments. ; PHP's default setting is "&". ; http://php.net/arg-separator.output ; Example: arg_separator.output = "&amp;" ; List of separator(s) used by PHP to parse input URLs into variables. ; PHP's default setting is "&

    Read the article

< Previous Page | 122 123 124 125 126