Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 126/372 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

  • WiFi signal is lost every 3 minutes

    - by Software Monkey
    For several weeks now my Android phone has been losing it's WiFi signal momentarily, typically at about 3 minute intervals (about 3 minutes, 1.5 seconds) and occasionally at some longer interval that always seems to be just over 3 minutes. This causes an interruption of several seconds while the WiFi connection is re-established and typically fails any kind of download/streaming that is happening, makes web sites "unreachable" and generally makes the phone unusable as a data device due to the frequency. The signal remains down for about a second, but the phone takes a few more seconds to reconnect to the router. This happens regardless of proximity to the router, which otherwise show a very strong signal - usually -40 to -30 dBm or better in the same room, nowhere less than 060 dBm anywhere in the house. Changing channels does not help (I've tried 1, 4, 8 and 9). Nor does turning off the router's guest access. Nor does turning off the 5.0 GHz band. Monitoring the signal on my phone with WiFi analyzer, shows all WiFi signals on all channels drop to nothing when the WiFi connection is lost (there are two other networks on different channels which are strong enough to be relevant, with about 6 others constantly fading in and out). WiFi analyzer shows 3 separate signals for my router, the main 2.4 GHz, the guest 2.4 GHz and the 5.0 GHz. Using WiFi Analyzer on my wife's phone side-by-side shows no change in signal when my phone drops, nor does her phone drop. Monitoring the signal using our laptop, side-by-side likewise shows no signal loss and likewise the laptop does not lose it's WiFi connection. But, at work, the phone seems to not exhibit the same behavior, or, if it does, it's very occasional. Monitoring it all day at work I only saw the signal drop 3 or 4 times. The signal strength of the various networks there is comparatively weak. AT&T were super helpful: "Sorry, we can't help you with WiFi problems. You could try doing a factory reset on your phone". </sarcasm The router is relatively new, but has been working fine with this phone since last Dec. Phone : Motorola Atrix (about 8 months old). Router : Belkin N750 DB (F9K1103 v1 (01C)). Router Firmware: 1.00.46 (2011/10/28 6:37:11). Security : WPA/WPA2-Personal (PSK)

    Read the article

  • How to use a different Ethernet connection

    - by SteveC
    I'm running a virtual machine at home which has a VPN connection to our main office, but I also want to connect to a share on another machine at home. When I check with IPCONFIG I can see two ethernet connections ... my work VPN ... Ethernet adapter Local Area Connection* 11: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : xxxx::xxxx:xxxx:xxxx:xxxxxxx IPv4 Address. . . . . . . . . . . : XXX.XXX.XXX.XXX Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : XXX.XXX.XXX.XXX and home local ... Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : lan Link-local IPv6 Address . . . . . : xxxx::xxxx:xxxx:xxxx:xxxxxxx IPv4 Address. . . . . . . . . . . : 192.168.1.70 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : What's weird is when I've been working before with a plugged-in ethernet cable I've not had any problem getting to the share? I can PING the other machine, but I can't access the share at ... \\othermachine\c$ I tried 'TRACERT` but that disappears off to the work network and eventually gets back to the local other machine after a few time-outs Is there anyway to "force" the connection to stay local ? UPDATE: the VPN is AEP SSL Tunnel

    Read the article

  • Setup VPN network for PS3

    - by L Franco
    Getting informed on setting up a home network so i can use VPN on my PS3, i live in Mexico but want the programming available in the US. Getting a little confused as every sites gives you different options, both in hardware and software. specially on subjects like dd-wrt, dns or vpn options... i know there is no "best" setup, but are there any tried and true?? Options in hardware and software would be apreciated...

    Read the article

  • Why does the screen resolution of 1440x900 suddenly disappears from Intel GMA Control Panel?

    - by GeneQ
    I'm using a Vostro 1200 laptop with the Mobile Intel(R) 965 Express Chipset powering its graphics and running Vista 32-bit SP2 . I've been using the Vostro with a Dell SE198WFP LCD Monitor as the external display since day one for about two years without any problems. Recently, I plugged the Vostro into a couple of other monitors. The problem is, now the native resolution for my main monitor's (the SE198WFP) resolution of 1440x900 @ 60 Hz is no longer available. (See below) I've tried everything from uninstalling and reinstalling the Intel drivers as well as the monitor drivers to no avail. I've Goggled that this problem and it appears that this has happened to other people but all the answers involve people giving up in frustration or reinstalling; both terrible outcomes. Has anybody ever figured why this happens and have a good solution? Thanks. UPDATE: This dude has a complicated solution, which I haven't tried yet. His explanations for the problem was After an exausting search for an answer to the matter of why my brand new 19? widescreen monitor’s native resolution (1440×900) was unavailible (sic) in the display properties, I finally stumbled upon an article a person posted on Intel’s forums that basically explained what shannanigans Intel had been up to with their GMA 950 line of onboard graphic solutions. Not very comforting.

    Read the article

  • Connect multiple WiFi networks simultaneously

    - by Tamir
    Hi all :-) I thought about connecting multiple WiFi networks simultaneously in order to leverage my bandwidth. I heared about "VirtualWifi" which is abandon by MS research. I have new Intel WiFi chipset (6200) and Win7 (64bit). Can I do such of thing somehow? Many thanks for your answers! Tamir

    Read the article

  • 802.11g -> wired ethernet bridging not working

    - by Malachi
    Usually people want to go the other direction, but I want to take our relatively fast and stable house 802.11g signal and bridge it to ethernet. I have tried using an Airport Express (the b/g flavor) and my i7 MacBook pro, both to no avail. Word is that the b/g flavor of This flavor of Airport Express maxes at firmware 6.3 which doesn't support this kind of bridging properly. However, I expected my MacBook pro to do the job with its "Internet Sharing" feature. Alas, although my wired PC does sort of see it, it doesn't work out. Strangely, using DHCP the PC receives the same IP address as my MBP uses on the network. Less strangely, but still surprisingly, the wired ethernet port on my mac registers as the IP address of the gateway when queried with IFCONFIG. It sort of makes sense that the mac would "pretend" to be the gateway, but the whole thing just isn't working and seems configured wrong - but all the docs I see say basically "OS X Internet Sharing: click it and go". What do I do? Do i really have to buy more hardware, even though I have plenty of would-be candidates for bridging? Incidentally, the host router originating the 802.11g signal is a belkin 802.11g router, and is documented to support WDS.

    Read the article

  • Laptop's wifi router is not emitting signals therefore my PC and Nokia cell are not connecting to internet

    - by umer sanny
    I have a USB internet connection which I plugged into my laptop. I converted my laptop's Wifi into a Wifi router so that I can attach my PC and cell to this network and enjoy internet, but it doesn't work. I have a Dell Inspiron N5110 i7 Windows 7 64-bit laptop, Dell D865 PC and Nokia C5. My PC and cell are showing that there is a new Wifi connection available, but when I connect to it, it won't load any web page. Reason is my laptop's Wifi is not emitting any internet signals or may be some other issue which i dont know.. laptop's adapter is 802.11b/g/n I don't know why. How can I enjoy Wifi internet on laptop, PC and cell at the same time?

    Read the article

  • How to Solve the "Unidentified network" in Windows 7

    - by gylns
    I connect the internet through Ad-hoc network, My machine uses win7 and another uses winows xp, There's no problem when I connect the XP machine, but if i disconnect and reconnect the net, then my local network is marked as "Unidentified network",unless restart the XP machine, I don't know why?

    Read the article

  • Asus EEE PC 1005HA (XP Home) refuses to connect to Virgin Mobile MiFi

    - by Dennis Wurster
    My client has an Asus EEE PC model 1005HA, and we're attempting to connect it to the WiFi network created by a VirginMobile MiFi unit. They also have a MacBook Pro with Snow Leopard that has absolutely no issue connecting to the MiFi. The specific symptom is that the netbook fails to lease an IP address from the MiFi unit. I supply the 12-digit numerical password (WPA) to the netbook, it throws a 'waiting for network' dialog with an indeterminate progress indicator, and then times out. Update: We've determined that this behavior has stopped when the EEE PC and the MiFi unit were taken out of the client's home, and to a different home that didn't have an existing wifi network. Similarly, when taken to a third location that didn't have wifi, the EEE PC and MiFi got along swimmingly. My current theory is that the existing wifi networks and the wifi leg of the MiFi unit are on the same channel and competing with one another. Perhaps the MacBook Pro has the capability to overcome this interference, while the EEE PC doesn't.

    Read the article

  • Laptop connecting to Wifi but not to internet

    - by eddard stark
    My friends laptop is able to connect to the wifi router . Typing 192.168.1.1 in the browser shows the login page for the router . But he cannot connect to the internet. This is true on both windows and linux (dual booting setup) . There are 3 other laptops connecting to the internet via wifi just fine and his was fine too until this happened all of a sudden . I tried doing a tracert from windows to an external ip . The first hop to the modem is fine but then the packets seem to be getting dropped . If his wifi adapter is damaged how is it connecting to the modem via wifi . I havent asked a question here before but this is really weird . If anyone needs any more information I shall post it here.

    Read the article

  • DNS not responding

    - by Born2win
    I have a Dlink DIR-615 router and I have it around six mounths. My internet connection is VPN (PPTP) based i.e. I have been give a username and password from my isp and my ip address is dynamic. But from few days I am experiencing a serious problem. My router connects normally (i can see yellow light) but my computer is giving "DNS not responding" error. I have tried everything (reset,reboot etc) but no sucess. Any help would be appreciated :)

    Read the article

  • How to detect device type from device connected to router?

    - by molly
    I have a att router and there is an unknown device connected to my network. I can't seem to kick it off because of how att's router settings are created which is kind of dumb. I am able to see its local ip and mac address. I am on a mac with snow leopard. How can I get more information on the device with the information that I have? I want to see what kind of device it is, I have checked all devices that are connected to the router and none seem to match the local ip that is connected. I have WPA encryption setup with a strong password.

    Read the article

  • Samsung "Kies via Wifi" doesn't work, stuck on "Loading..."

    - by eyalb99
    When I connect my Galaxy S2 to my laptop using "Kies via Wifi" it doesn't work. On my phone it tells me it is connected, and on the laptop I can see the device "GT-I9100" under connected devices, but I see no files or anything else. When I move the mouse icon over the "GT-I9100", it writes "Loading...". I've waited long enough but nothing happens. When I connect the phone using USB cable, it works perfectly fine.

    Read the article

  • Debian Wheezy, hostapd running but no AP detected by clients

    - by f0o
    I've an TL-WN951N (AR5416+AR5008) using ath9k module running an hostapd and a dhcp for it. So hostapd starts fine: $ hostapd wifi.test Configuration file: wifi.test Using interface int1 with hwaddr f4:ec:38:9b:d4:93 and ssid 'test' hostapd.conf: interface=int1 driver=nl80211 ssid=test channel=1 But nobody seems to find it or being able to see it or connect to it by setting BSSID to 'test'. I'm quite frustrated now, I find 'howto' after 'howto' from people with same chipsets and it always seemed to work out great for them - but not here... iw list even shows up the AP mode being present at the interface... Thanks for your help

    Read the article

  • Decreasing lagging on router, while gaming

    - by user2699451
    I had absolutely no idea where to post this question and get a professional answer for it but here goes... Okay, so I guess everyone whos is reading this had played online, and so I was playing LoL again tonight and my brother decided that now was a great time to go on youtube and start watching a movie, so my ping (connecting from South Africa to EU west server) is around 190-220 average, however it started spiking to 2000 and average was 600-800, so it arised the question, how ther hell can I "kick" him off for the time being I tried reasoning it out with him but its like playing chess with a pigeon, he's studying to be an engineer, and I just cant win an argument with him, so i need to step it up a level... I have in the past used the aireplay method by sending deauth packets but it only helped so much, is there another way of either kicking a peer of the local wifi or decreasing the lag spikes while in session or even splitting the bandwidth equally in 2 or 3,etc What do I do p.s. sorry if off topic, if it is not appropriate, just say which website will be able to help or assist me...

    Read the article

  • MacBook repeatedly disconnects from Wi-Fi

    - by redwall_hp
    I have an early 2008-model MacBook (2.4 GHz). The Wi-Fi router I have at home is a Linksys WRT54GX2 that I have had for a few years. My MacBook has recently started disconnecting from the router every few minutes, which is rather annoying. I can reconnect again without having to restart the router or anything, as it seems that the MacBook is just dropping the connection. I have tried changing the channel on the router, and upgrading the laptop from Leopard to Snow Leopard made no difference either. I'm only about six feet from the Linksys device, so distance isn't an issue. This only happens with the Linksys router, while I can use the local library's open network without any issues. The problem also seemingly becomes more pronounced after midnight. What could the problem be? Edit: Here are the logs that Spiff requested: http://pastie.org/951761

    Read the article

  • Sudden loss of Wi-Fi connectivity on OS X

    - by GJ.
    Occasionally while I work, without any special provocation, I lose connectivity via Wi-Fi. Other devices connected to the same wifi network have no interruption, and the problem gets resolved once I reboot my MacBook Air, so it's definitely a local problem. Observations: The Wi-Fi symbol in the menu indicates that I'm still connected, but apps can't actually connect neither to the Internet nor to other devices in the LAN. I can't connect to an alternate Wi-Fi network (e.g. Wi-Fi tethering via iPhone). I can connect to the Internet via iPhone USB tethering but this seems to only work some of the time. Only a reboot solves the problem but a regular restart gets stuck on a grey screen with rotating wheel (after all applications have closed) and I have to do a hard reset. How should I go about troubleshooting this? It used to happen very rarely but now is becoming more frequent (approaching once every 2-3 days on average).

    Read the article

  • Using wifi router as bridge to increase signal?

    - by overtherainbow
    A friend of mine lives in an appartment building whose structure is such that wifi signal is very weak. Even a USB key won't work. I was thinking of buying an entry-level wifi router and reconfigure it as a bridge to act as repeater. Would that increase the chance of getting a good signal, or I shouldn't bother? If experience shows that it does improve things significantly, is their another router I should look at besides the Linux-based Linksys models? Thank you.

    Read the article

  • Intel Ethernet Bottlenecking Internet?

    - by Donald Darma
    I'm having trouble with my internet speeds. So I just recent build a pc and everything is fine. I installed the Intel drivers and connected to the internet. It connects but I'm only half the speed I should be getting. My normal speed is 20mbps but speedtest.net is only showing 10. It can't be my ISP (which is TWC if anyone is asking) because my other devices like my laptop and my smartphone are showing 20 down. Heres my system: CPU: i5 4430 HSF: Stock cooler Mobo: Gigabyte Z87MX-D3H GPU: x2 MSI R7950-3GD5/OC BE RAM: Crucial Ballistix Tactical Tracer 8GB dual channel PSU: Silencer High Performance Power Supply 750 Watt 80+ (It's a subdivision of OCZ) HDD: Seagate Barracuda 7200RPM 3TB SSD: Samsung 840 Evo 120 GB Case: Corsair Obsidian 350D Edit: I am using the stock adapter that is on the motherboard. I know for a fact that the cable is good because I used it on my laptop and it ran fine. Its a CAT5E cable. I also ran IPERF and its giving me the same results, 10 mbps.

    Read the article

  • Chipset GPU causes a massive slowdown

    - by zyboxenterprises
    My AMD Radeon HD 7700 recently broke (fan stopped working and GPU overheated), and now I'm running on internal chipset graphics, and it causes a massive slowdown of the whole PC. I've changed the graphics memory from 32MB (minimum) to 256MB (highest), and it hasn't made any difference whatsoever. I'm using Windows Aero, and disabling it should have made a small difference, but it didn't; the whole PC is still slow. I know that it's not the computer build, because I built it myself, and it was a lot faster when it had the AMD Radeon HD 7700 in it, which is the reason why I believe it's the internal chipset graphics that are causing the problem. Is this behavior normal? I don't have the cash right now to go out and buy a new dedicated GPU. I'm using an ASRock N68C-GS FX motherboard with an AMD FX 4100 (overclocked to 4.3GHZ), with 4GB RAM. The overclock was an attempt to resolve this issue, and it isn't related to this issue that the integrated graphics is causing a slowdown.

    Read the article

  • GPU not powering on

    - by Lerp
    So I got home from work yesterday and went to turn my computer on as per usual to be greeted by this: The screens remained black, so I rebooted; I go as far as GRUB before my screens went black again. I rebooted again, they didn't turn on. I rebooted again, I got as far as the windows login screen. This time I unplugged it, opened it up and cleaned it but to no luck. The GPU was still being tempermental. I repeated the process of turning off and on several times until one time it work as normal. I happily played games for the rest of the night (5-6 hours?) thinking everything was jolly good now. Well I get home from work today and it is doing the SAME thing. Sometimes everything displays normally for a few seconds to minutes then the screens go black; then sometimes the screens don't come on at all. Summary and additional points Screens sometimes turn on before shortly turning off, sometimes they don't; I cannot seem to determine any pattern between when they do or do not turn off. The build has been working fine for about 8 months now so I know it's not hardware incompatibility. If I plug a monitor into the on board graphics I can use the PC normally (just in low graphics mode) I have two monitors and it's a case of they both turn on or not. So I think I can rule out the monitors being dead. I have tried replacing the GPU I have tried replacing the RAM I have tried flashing the CMOS I have tried cleaning the inside The GPU is a Radeon HD 7870 My questions Is my GPU dead? It's not very old and I would rather have a method of being certain it's the GPU before I fork out some money I can't really afford. I do not have a second PC here to test it in. If my GPU is dead why does it sometimes work and sometimes not? Update Okay, it was working again.. at least I thought it was. I left it running for 10-20minutes with the screens black. Turned it off and straight back on and it worked for all of 10minutes. I was then updating the post in joy thinking I could play some games for the rest of the night when BAM it went black again. So yeah, I don't know :C

    Read the article

  • how to detect device type from connected device to router?

    - by molly
    i have a att router and there is an unknown device connected to my network. i cant seem to kick it off because of how att's router settings are created which is kind of dumb. i am able to see its local ip and mac address. i am on a mac with snow leopard. how can i get more information on the device with the information that i have? i want to see what kind of device it is, i have checked all deviced that are connected to the router and non seem to match the local ip that is connected. i have wpa encryption setup with a strong password.

    Read the article

  • Linux Mint Debian Cinammon soundcard selection

    - by Peter Gridling
    i use said OS and i am missing a window or setting to set the default soundcard. I have a builtin analog soundcard which works just fine and is set as default, also i have a usb headset which works fine eg. with mumble i set input and output on my headset and it just works, also the mute button and volume control on the headset works, but on the default soundcard lol. what i am missing is to set my headset as the default soudcard. i also tried some stuff from there: http://wiki.debian.org/ALSA/ but it seems that alsa is not supported 100% :( some1 here to help? best regards

    Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >