Search Results

Search found 4590 results on 184 pages for 'direction'.

Page 127/184 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

  • URL Rewriting on GoDaddy Virtual Server

    - by Aristotle
    I migrated a Kohana2 application from a shared-hosting environment over to a virtual dedicated server. After this migration, I can't seem to get my .htaccess file working again. I apologize up front, but over the years I have never experienced so much frustration with anything else as I do with the dreaded .htaccess file. Presently I have my project installed immediately within a directory in my public folder: /var/html/www/info.php (general information about server) /var/html/www/logo.jpg (some flat file) /var/html/www/somesite.com/[kohana site exists here] So my .htaccess file is within that directory, and has the following contents: # Turn on URL rewriting RewriteEngine On # Installation directory RewriteBase /somesite.com/ # Protect application and system files from being viewed # This is only necessary when these files are inside the webserver document root RewriteRule ^(application|modules|system) - [R=404,L] # Allow any files or directories that exist to be displayed directly RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # Rewrite all other URLs to index.php/URL RewriteRule .* index.php?kohana_uri=$0 [PT,QSA,L] # Alternativly, if the rewrite rule above does not work try this instead: #RewriteRule .* index.php?kohana_uri=$0 [PT,QSA,L] This doesn't work. The initial controller is loaded, since index.php is called up implicitly when nothing else is in the url. But if I try to load up some other non-default controller, the site fails. If I place the index.php back within the url, the call to other controllers works just fine. I'm really at my wits end, and would appreciate some direction here.

    Read the article

  • Setting up a network e-mail server

    - by Jason
    Hello, My boss just asked me to buy a new server for our office network. I know next to nothing about servers and networking, so I need someone to point me in the right direction. He said he wants this to be our e-mail server with a network login. I have no idea how to set up an e-mail server, especially one that sends/receives e-mail using our domain name. We use a terrible piece of order/inventory software called Mail Order Manager (MOM). Our computers currently connect to the MOM database through a networked drive. My boss would like to move away from this peer-to-peer MOM setup. The software publisher offers a SQL version of MOM, but it's way overpriced. Is there a better way to connect to these databases without using the SQL version? Finally, the server needs to be running Windows. Does this question make sense, is it possible, and can someone help me get started? Thanks!

    Read the article

  • Why can't “knife data bag from file” find existing json file on chef server?

    - by ellisera
    Summary: I'm running into a problem with "knife data bag from file", where knife doesn't recognize the .json data bag file pulled down from a remote git repo. Background: I'm currently trying to transition from chef-solo use to chef server while using the cookbooks, data bags and other chef info from our remote git repo. I've currently pulled down a copy of our git repo and set the cookbook path and data bag path in knife.rb. I also loaded the cookbooks, made adjustments, etc. Details: When trying to load our .json data bags by doing "knife data bag add from file FOLDER FILE" it looks like it worked until I do "knife data bag list" and it comes up blank. So I decided to try adding the edit option at the end to see what's being loaded, if it is. This is the error I get: knife data bag from file local_settings test.json -e nano ERROR: Could not find or open file 'test.json' in current directory or in 'data_bags/local_settings/test.json' The data bag file does exist, in the proper location, in a tested, working json file. I've also sometimes gotten an error saying "could not open data bag "local_settings". I would obviously like to keep the data bag path within the appropriate git repo folder to be able to keep track of changes in a more centralized location (our git repo, as opposed to the chef server). Any solutions, advice or pointers in the right direction are appreciated.

    Read the article

  • How to configure postfix for per-sender SASL authentication

    - by Marwan
    I have two gmail accounts, and I want to configure my local postfix server as a client which does SASL authentication with smtp.gmail.com:587 with credentials that depend on the sender address. So, let's say that my gmail accounts are: [email protected] and [email protected]. If I sent a mail with [email protected] in the FROM header field, then postfix should use the credentials: [email protected]:psswd1 to do SASL authentication with gmail SMTP server. Similarly with [email protected], it should use [email protected]:passwd2. Sounds fairly simple. Well, I followed the postfix official documentation at http://www.postfix.org/SASL_README.html, and I ended up with the following relevant configurations: /etc/postfix/main.cf smtp_sasl_auth_enable = yes smtp_sasl_security_options = noanonymous smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sender_dependent_authentication = yes sender_dependent_relayhost_maps = hash:/etc/postfix/sender_relay smtp_tls_security_level = secure smtp_tls_CAfile = /etc/ssl/certs/Equifax_Secure_CA.pem smtp_tls_CApath = /etc/ssl/certs smtp_tls_session_cache_database = btree:/etc/postfix/smtp_scache smtp_tls_session_cache_timeout = 3600s smtp_tls_loglevel = 1 tls_random_source = dev:/dev/urandom relayhost = smtp.gmail.com:587 /etc/postfix/sasl_passwd [email protected] [email protected]:passwd1 [email protected] [email protected]:passwd2 smtp.gmail.com:587 [email protected]:passwd1 /etc/postfix/sender_relay [email protected] smtp.gmail.com:587 [email protected] smtp.gmail.com:587 After I'm done with the configurations I did: $ postmap /etc/postfix/sasl_passwd $ postmap /etc/postfix/sender_relay $ /etc/init.d/postfix restart The problem is that when I send a mail from [email protected], the message ends up in the destination with sender address [email protected] and NOT [email protected], which means that postfix always ignores the per-sender configurations and send the mail using the default credentials (the third line in /etc/postfix/sasl_passwd above). I checked the configurations multiple times and even compared them to those in various blog posts addressing the same issue but found them to be more or less the same as mine. So, can anyone point me in the right direction, in case I'm missing something? Many thanks.

    Read the article

  • Address (url) forwarding with Vyatta

    - by Trikks
    Hi Got this kind of noob question i suppose. I got this very basic network setup and need help to set up some address forwarding. As seen in my illustration below all traffic enters via the eth0 interface (85.123.32.23). The external dns is setup to direct all hosts to this ip as well. Now, how on earth do I filter the incoming requests to each box? The Ip's are static! Se the network layout here: http://vyatta.org/files/u11160/setup.png I do not wish to solve this by assigning tons of ports etc. In my wishful thinking something like this would be nice :) set service nat rule 10 type destination set service nat rule 10 inbound-interface eth0 set service nat rule 10 destination address ftp.myhost.com set service nat rule 10 inside-address address 192.168.100.20 This way ALL traffic to the address ftp.myhost.com (at eth0) should be routed to the internal ip, 192.168.100.20. Right, is there anyone who could point in some direction? Maybe it's wrong to use nat? Please help me! :)

    Read the article

  • Cannot Change "Log on through Terminal Services" in Local Security Policy XP from Server 2008 GP

    - by Campo
    This is a mixed AD environment, Server 2003 R2 and 2008 R2 I have a 2003 AD R2 and a 2008 R2 AD. GPO is usually managed from the 2008 R2 machine. I have a RD Gateway on another server as well. I setup the CAP and RAP to allow a normal user to log on to the departments workstation. I also adjusted the GPO for that OU to allow Log on trhough Remote Desktop Gateway for the user group. This worked on my windows 7 workstation. But unfortunately the policy is a different name in XP "allow log on through Terminal Services" I can get through right into the machine but when the log on actually happens to the local machine i get the "Cannot log on interactively" error. This is set in (for the local machine) Secpol.msc Local Security Policy "user rights assignment" but is controlled by the GPO in Computer Configuration Policies Security Settings Local Policies "User Rights Assignment" Do I simply need to adjust the same setting on the same GPO but with a server 2003 GP editor? Feel like that could cause issues... Looking for some direction. Or if anyone has run into this issue yet. UPDATE Should this work? support.microsoft.com/kb/186529 Still seems like I will have the issue as the actual GP settings for Log on through Terminal Services is still different between Server 2008 R2 and 2003 R2.... Another Thought: Should I delete the GPO made for the department and remake it with the 2003 R2 server? I have no 2008 specific settings as the whole department runs XP other than myself. If that's a solution I will move my computer out of the department as a solution... Thoughts?

    Read the article

  • Address (url) forwarding with Vyatta

    - by Trikks
    Got this kind of noob question i suppose. I got this very basic network setup and need help to set up some address forwarding. As seen in my illustration below all traffic enters via the eth0 interface (85.123.32.23). The external dns is setup to direct all hosts to this ip as well. Now, how on earth do I filter the incoming requests to each box? The Ip's are static! My network layout: I do not wish to solve this by assigning tons of ports etc. In my wishful thinking something like this would be nice :) set service nat rule 10 type destination set service nat rule 10 inbound-interface eth0 set service nat rule 10 destination address ftp.myhost.com set service nat rule 10 inside-address address 192.168.100.20 This way ALL traffic to the address ftp.myhost.com (at eth0) should be routed to the internal ip, 192.168.100.20. Right, is there anyone who could point in some direction? Maybe it's wrong to use nat? Please help me! :)

    Read the article

  • Performance of file operations on thousands of files on NTFS vs HFS, ext3, others

    - by peterjmag
    [Crossposted from my Ask HN post. Feel free to close it if the question's too broad for superuser.] This is something I've been curious about for years, but I've never found any good discussions on the topic. Of course, my Google-fu might just be failing me... I often deal with projects involving thousands of relatively small files. This means that I'm frequently performing operations on all of those files or a large subset of them—copying the project folder elsewhere, deleting a bunch of temporary files, etc. Of all the machines I've worked on over the years, I've noticed that NTFS handles these tasks consistently slower than HFS on a Mac or ext3/ext4 on a Linux box. However, as far as I can tell, the raw throughput isn't actually slower on NTFS (at least not significantly), but the delay between each individual file is just a tiny bit longer. That little delay really adds up for thousands of files. (Side note: From what I've read, this is one of the reasons git is such a pain on Windows, since it relies so heavily on the file system for its object database.) Granted, my evidence is merely anecdotal—I don't currently have any real performance numbers, but it's something that I'd love to test further (perhaps with a Mac dual-booting into Windows). Still, my geekiness insists that someone out there already has. Can anyone explain this, or perhaps point me in the right direction to research it further myself?

    Read the article

  • ADSL throughput loss from Reed-Solomon encoding

    - by javano
    I'm reading about ADSL starting here and I am confused by how the Reed-Solomon encoding for ECC is limiting the available transfer rate, as much as it does (nearly half). This pdf on the same subject contains the following; A maximum of 255 sub-carriers can be used to modulate data in the downstream direction. Sub-carrier 256, the downstream Nyquist frequency, and sub-carrier 64, the downstream pilot frequency, are not available for user data, thus limiting the total number of available downstream sub-carriers to 254. Each of these 254 sub-carriers can support the modulation of 0 to 15 bits. Since the ADSL DMT data frame rate is 4000 frames per second, the maximum theoretical downstream data rate of an ADSL system is 15.24Mbps. Due to limitations in system architecture, specifically the maximum allowable Reed-Solomon codeword size (255 bytes), the maximum achievable downstream data rate is 8.16Mbps. How is this nearly halving the throughput? Is all that extra bandwidth overhead of the RS encoding? 15240000 bps (15.24Mbps) - 8160000 bps (8.12Mbps) = 7080000 bps (7.08Mbps). Where has that 7Mbps of throughput gone? EDIT: I tried to read the wiki page on Reed-Soloman but it's all crazy maths and algerbra, which I don't understand. I can understand that data is split into 255 byte codewords, because that maybe the max codeword size whilst still maintaining accuracy during transmission; But I don't understand why that means less data is sent?

    Read the article

  • wget not working with domain on local machine

    - by user568829
    Basically - I have some PHP scripts that need to be run as cron jobs. Lets say the script needing to be run is: http://admin.somedomain.com/cron_jobs/get_stats If I run the script from the local machine it gives me a 404 Not Found error. So I entered the following into /etc/hosts XX.XX.XX.45 admin.somedomain.com Now wget works fine from the local machine to that domain. However when I restart Apache that domain no longer works. Here is the config for that site in /etc/apache2/sites-available NameVirtualHost XX.XX.XX.45:80 <VirtualHost XX.XX.XX.45:80> ServerName admin.somedomain.com DocumentRoot /var/www/admin.somedomain.com/ <Directory "/var/www/admin.somedomain.com"> allowoverride all Options Indexes order deny,allow allow from all </Directory> ErrorLog /var/log/apache2/admin.somedomain.com-error_log CustomLog /var/log/apache2/admin.somedomain.com-access_log combined </VirtualHost> It just goes to the default site config showing "It Works". If I take out that setting in /etc/hosts and restart apache the website at that domain works fine again. Can anyone point me in the right direction here? Thanks

    Read the article

  • Migrating from "partial" Exchange 2003 to full Exchange 2003 usability

    - by TheCleaner
    I have a client that is using Exchange 2003 on SBS 2003 R2, but only for calendar sharing and contacts sharing. Their email is still coming to their clients via a POP3 account on each client's Outlook. I'd like to move them over to using Exchange for both email and the other things they are utilizing it for now. Can you folks guide me in the right direction? The setup: external domain is akin to domain.com (and is where they get their POP3 email from now) internal domain is akin to domain.local only simple hardware firewall (no ISA) static external IP is available to use My "assumptions": Setup SMTP default connector in Exchange for their existing external domain Have their existing email backed up to PST files (just in case) Setup the new MX records to point domain.com to the static external IP I'm a little confused how I'm going to setup their existing Exchange accounts with the proper SMTP address though. Right now it is just [email protected]. Do I just need to modify or create a new recipient policy? Are there other steps involved that I'm missing? Anyone with a walkthrough or even a basic "steps" is fine. I'm fairly used to Exchange 03, but I've been on Exchange 07 for a while now so going back is the weird part...plus I don't know what issues Exchange 03 on SBS has versus the normal "version". Thanks for all the help!

    Read the article

  • Web Deploy 3.0 Installation Fails

    - by jkarpilo
    I am having difficulty installing Microsoft Web Deploy 3.0 to a Windows Server 2008 R2 box. I have tried installing with both the Web Platform Installer and the MSI package but installation fails while trying to execute the MSI custom action ExecuteRegisterUIModuleCA. This server is a VM and a member of a farm but shared config is disabled while I'm installing. Here's the point at which it fails in the MSI log (starting at line 1875): MSI (s) (80:FC) [15:29:01:358]: Executing op: ActionStart(Name=IISBeginTransactionCA,,) MSI (s) (80:FC) [15:29:01:374]: Executing op: CustomActionSchedule(Action=IISBeginTransactionCA,ActionType=3073,Source=BinaryData,Target=IISBeginTransactionCA,) MSI (s) (80:A8) [15:29:01:374]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI6C6A.tmp, Entrypoint: IISBeginTransactionCA MSI (s) (80:FC) [15:29:01:436]: Executing op: ActionStart(Name=IISRollbackTransactionCA,,) MSI (s) (80:FC) [15:29:01:436]: Executing op: CustomActionSchedule(Action=IISRollbackTransactionCA,ActionType=3329,Source=BinaryData,Target=IISRollbackTransactionCA,) MSI (s) (80:FC) [15:29:01:436]: Executing op: ActionStart(Name=IISCommitTransactionCA,,) MSI (s) (80:FC) [15:29:01:436]: Executing op: CustomActionSchedule(Action=IISCommitTransactionCA,ActionType=3585,Source=BinaryData,Target=IISCommitTransactionCA,) MSI (s) (80:FC) [15:29:01:436]: Executing op: ActionStart(Name=IISExecuteCA,,) MSI (s) (80:FC) [15:29:01:452]: Executing op: CustomActionSchedule(Action=IISExecuteCA,ActionType=3073,Source=BinaryData,Target=IISExecuteCA,CustomActionData=1^3^21^WebDeployment_Current^154^Microsoft.Web.Deployment.UI.PackagingModuleProvider, Microsoft.Web.Deployment.UI.Server, Version=9.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35^1^1^0^^1^3^28^DelegationManagement_Current^171^Microsoft.Web.Management.Delegation.DelegationModuleProvider, Microsoft.Web.Management.Delegation.Server, Version=9.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35^1^1^0^^1^7^38^system.webServer/management/delegation^4^Deny^16^MachineToWebRoot^0^^3^yes^1^7^31^system.webServer/wdeploy/backup^4^Deny^20^MachineToApplication^0^^2^no^) MSI (s) (80:84) [15:29:01:452]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI6CB9.tmp, Entrypoint: IISExecuteCA 1: IISCA IISExecuteCA : Begin CA Setup 1: IISCA IISExecuteCA : CA 'ExecuteRegisterUIModuleCA' completed with return code hr=0x8007000d 1: IISCA IISExecuteCA : CA 'IISExecuteCA' completed with return code hr=0x8007000d 1: IISCA IISExecuteCA : End CA Setup CustomAction IISExecuteCA returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox) Action ended 15:29:05: InstallFinalize. Return value 3. I can't seem to find any information regarding this particular issue; can someone help point me in the right direction?

    Read the article

  • Openfiler iSCSI performance

    - by Justin
    Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

    Read the article

  • 2 Server FC SAN Configuration

    - by BSte
    I have 2 identical servers: -48GB Ram -8GigE NIC's -2FC NIC's -2x72GB RAID1 Hard Drives -Server 2008R2 Host I also Have a Fibre Channel SAN: -16x146GB RAID10 Hard Drives -2xDual-port FC Controllers (Controller A and B both have ports 1 and 2) -Server 1 has Fiber to Ports A1 and B1 -Server 2 has Fiber to Ports A2 and B2 -I kept the default config with 1 Virtual Disk and 1 Volume -The default mappings show ports A1,A2,B1,B2 on LUN 0 with read-write My goal is: -2xVM's with IIS and Guest Level Failover -2xVM's with SQL 2008 Enterprise using a Single DB and Guest Level Failover -1xVM that is an application server, preferable with Host Failover. From what I read, this will also need AD for clustering to work. -I need at least 1 VM always running for IIS and the SQLDB. This includes hardware failover and application (ie: reboot a VM for Critical updates) I was told I could install the VM's and run them from the SAN, and this is what I've tried: Installed MPIO and HyperV on Server1 and Server 2 Added the SAN as Disk E: on both servers, made it GPT and formatted NTFS Configured HyperV on both server to store use E:\VD and E:\VHD On server1, I was able to install 3 VM's on the SAN and all worked well. On server2, I would start installing the other 2 VM's, but always at some point the VM's would get a corrupt .VHD message (either server). Everything I found about the message typically related to antivirus, so I removed all antivirus on both Host servers (now only running 2008R2). I reformatted drive E: (SAN), recreated the VHD and VD directories, installed 3 VM's on Server 1, and then had the same issue when installing VM's on Server2. Obviously something is wrong, but I'm not certain what exactly. My questions: 1) Are my goals possible with this hardware setup? -I've read 2008R2 supports FC SAN's, but a lot of articles seem to only give examples with iSCSCI setups 2) What would be the suggested route on setting up the SAN (disks,volumes,LUN's)? I've worked with HyperV on a single machine before and never had issues. Actual experience working on SAN's and clustering is new to me. Any suggestions or recommendations to get me in the right direction would be much appreciated.

    Read the article

  • Help diagnosing Likewise Open Active Directory authentication problem

    - by purpletonic
    I have two servers which were up until recently authenticating against the companies Active Directory Domain controller. I believe a recent change to the Active Directory administrator password caused the servers to stop authenticating against AD. I tried to add the servers back to the domain using the command: domainjoin-cli join example.com adusername this seemed to work without complaints, but when I try to login via ssh with my domain account, I get an invalid password error. When I run the command: lw-enum-users it prints all of the domain users, and looking up my own account, I see that it is valid and my password hasn't expired. I also ran lw-get-status and received the following: LSA Server Status: Agent version: 5.0.0 Uptime: 0 days 3 hours 35 minutes 46 seconds [Authentication provider: lsa-activedirectory-provider] Status: Online Mode: Un-provisioned Domain: example.com Forest: example.com Site: Default-First-Site-Name Online check interval: 300 seconds \[Trusted Domains: 1\] \[Domain: EXAMPLE\] DNS Domain: example.com Netbios name: EXAMPLE Forest name: example.com Trustee DNS name: Client site name: Default-First-Site-Name Domain SID: S-1-5-24-1081533780-4562211299-822531512 Domain GUID: 057f0239-7715-4711-e64b-eb5eeed20e65 Trust Flags: \[0x001d\] \[0x0001 - In forest\] \[0x0004 - Tree root\] \[0x0008 - Primary\] \[0x0010 - Native\] Trust type: Up Level Trust Attributes: \[0x0000\] Trust Direction: Primary Domain Trust Mode: In my forest Trust (MFT) Domain flags: \[0x0001\] \[0x0001 - Primary\] \[Domain Controller (DC) Information\] DC Name: dc1.example.com DC Address: 10.11.0.103 DC Site: Default-First-Site-Name DC Flags: \[0x000003fd\] DC Is PDC: yes DC is time server: yes DC has writeable DS: yes DC is Global Catalog: yes DC is running KDC: yes [Authentication provider: lsa-local-provider] Status: Online Mode: Local system Anyone got any ideas what might be occurring? Thanks in advance!

    Read the article

  • Authentication required by wireless network.

    - by Roman
    I would like to use a wireless network from Ubuntu. In the network drop-down menu I select a network (this is a University network I have an account there). Then I get a windows with the following fields: Wireless Security: [WPA&WPA2 Enterprise] Authentication: [Tunneled TLS] Anonymous Identity: [] CA Certificate: [(None)] Inner Authentication: [some letters] User Name: [] Password: [] I put there my user name and password and do not change default value and leave "Anonymous Identity"blank. As a result of that I get "Authentication required by wireless network". How can I solve this problem? I think it is important to notice that our system administrator tried to find some files (which are probably needed to be used as "CA Certificate"). He said that he does not know where this file is located on Ubuntu (he support only Windows). So, probably this is direction I need to go. I need to find this file. But may be I am wrong. May be something else needs to be done. Could you pleas help me with that?

    Read the article

  • Problems with freetype on OSX 10.7.4

    - by eythor
    I'm trying to install mplayer with OSD using homebrew. I've added both --enable-menu and --with-freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config to the brew recipe. ==> Downloading http://www.mplayerhq.hu/MPlayer/releases/MPlayer-1.1.tar.xz Already downloaded: /Library/Caches/Homebrew/mplayer-1.1.tar.xz xz -dc "/Library/Caches/Homebrew/mplayer-1.1.tar.xz" | /usr/bin/tar xf - ==> ./configure --prefix=/usr/local/Cellar/mplayer/1.1 --cc=cc --host-cc=cc --disable-cdparanoia --disable-libopenjpeg --enable-menu --disable-x11 -- with-freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config ./configure --prefix=/usr/local/Cellar/mplayer/1.1 --cc=cc --host-cc=cc --disable-cdparanoia --disable-libopenjpeg --enable-menu --disable-x11 --with -freetype-config=/usr/local/Cellar/freetype/2.4.10/freetype-config Checking for cc version ... clang 4.2.1 (experimental support only) Checking for working compiler ... yes Detected operating system: Darwin Detected host architecture: x86_64 Checking for cross compilation ... no Checking for host cc ... cc Checking for CPU vendor ... GenuineIntel (6:15:10) Checking for CPU type ... Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz For freetype-config I've tried three seperate paths; /usr/X11R6/bin/freetype-config, /usr/X11/bin/freetype-config and the one in Cellar. Checking for freetype always fails: Checking for freetype >= 2.0.9 ... no Checking for fontconfig ... no (FreeType support needed) Although freetype itself seems to be installed. mufasa:bin eythor$ freetype-config --version 15.0.9 mufasa:bin eythor$ freetype-config --ftversion 2.4.10 mufasa:bin eythor$ freetype-config --libs -L/usr/local/Cellar/freetype/2.4.10/lib -lfreetype -lz -lbz2 mufasa:bin eythor$ freetype-config --cflags -I/usr/local/Cellar/freetype/2.4.10/include/freetype2 - I/usr/local/Cellar/freetype/2.4.10/include I'm not sure what to try next or how to figure out why freetype isn't recognized. Can anyone point me in a sensible direction?

    Read the article

  • Multiple SVN repos on Debian HTTPd vhost setup

    - by Jonathon Reinhart
    I would like to have my svn/http server setup so I can access multiple repositories via a "svn" subdomain: https://svn.example.com/repo1 https://svn.example.com/repo2 I am using Debian 6, and already have multiple vhosts set up via the standard sites-available method. Resources and their problems: How To: subversion SVN with Apache2 and DAV This one doesn't deal with a server with multiple vhosts. Installing and Configuring Subversion This one only considers one subversion repository. This one does show putting the SVN DAV <Location> in the svn vhost file. However, it doesn't say whether to put it inside or outside the <VirtualHost> tag. Does this really limit the subversion access to just that vhost? I just tried, and can access /foorepo from any subdomain. Setting Up Subversion And Trac As Virtual Hosts On An Ubuntu Server This one appears to be very close, but I can still access repos from any vhost. In other words, it doesn't matter what subdomain I specify, as long as the path matches the repo name. Doesn't make any sense. And yes, my <Location> tag is inside the <VirtualHost>. A lot of these articles seem to have been written in 2006 or earlier, and don't necessarily conform to the configuration methods that newer distros are using. Can anyone guide me in the right direction?

    Read the article

  • Localhost problems on Mac OS X 10.7

    - by Maya
    Sorry for the duplicate post ( http://stackoverflow.com/questions/9720871/localhost-problems-on-mac-os-x-10-7 ), but I got the advice that this is a better place to ask my question: I want to access a mysql server remotely over ssh. So I used port forwarding to access the remote 3306 port on my localhost as 8383. The ssh connection can established successfully. But when I want to telnet onto port 8383 on localhost I get the following error: ~: telnet 127.0.0.1 8383 Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host I tried the same on a friends Laptop (also Mac OS X 10.7) and it worked fine, so it is very unlikely that the ssh connection is the problem. I assume it has something to do with my local network configuration. I turned off IPv6, just in case. My /etc/hosts looks like this: 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost I would greatly appreciate any help. Please point me in the right direction if this is not the right place to ask this question.

    Read the article

  • Ntop monitoring - Hosts visible with no SPAN/mirroring

    - by Cory J
    I am attempting to use ntop to monitor traffic over a Cisco Catalyst switch. I was assuming that in order to see any of the traffic, I'd have to use monitor, as described here: http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml. Howver, before I did anything on the switch, I simply plugged my ntop server in and fired up ntop. To my suprise, I instantly see 3+ pages of hosts, and thousands of packets. How is ntop seeing this? I have verified that no monitoring exists on the switch (run as en): cs1.pvdc#show monitor No SPAN configuration is present in the system. My ntop server is Ubuntu 8.04, I haven't done ANY configuration, I just installed the ntop package. This is also a fresh Ubuntu install. Is there anything else on my switch besides "monitor" that might cause my switch to mirror all its traffic like this? I've tried plugging ntop into different ports with the same results. UPDATE: It appears to be more then just broadcast traffic showing up in ntop, for example, I can see when my IPs have talked to the DNS server or generated HTTP traffic. If my switch is misconfigured, can anyone point me in the right direction towards rectify this? Not a Cisco expert.

    Read the article

  • Installing SATA dvd burner on machine with no spare SATA ports/connectors

    - by Faheem Mitha
    Greetings. I have the following motherboard Tyan Thunder K8WE S2895A2NRF Motherboard - extended ATX - nForce Pro 2200/2050 - Socket 940 - UDMA133, Serial ATA-300 (RAID) - 2 x Gigabit Ethernet - FireWire - 6-1 channel audio This is part of a computer that was assembled in the winter of 2006/2007. The user manual says the following with regard to SATA Integrated SATAII Generation 1 Controllers (from NForce Professional 2200) Two integrated dual port SATA II controllers Four SATA connectors support up to four drives 3 Gb/s per direction per channel NvRAID v2.0 support Supports RAID 0, 1, 0+1 and JBOD. I just purchased a SATA DVD burner. Here is the page for the product http://www.amazon.ca/gp/product/B002QGDWLK/ The problem I am facing is that I already have 4 SATA drives installed. I don't want to remove any of them. However, I want the DVD burner above installed as well. The person I am consulting with here (Bombay, India) tells me that my four available SATA ports are filled, and that my only option is to install a SATA card into the one free PCI slot on the motherboard. However, he says that with this setup I will not be able to boot from the DVD drive. Are these statements correct, and what are my other options if any? Even it the statements in the last para are true, I suppose I could use one of the motherboard connectors/ports there are currently being used with the hard drives with the DVD drive, and use the "add-on" connector with one of the hard drives. Not all the 4 hard drives need to be bootable. BTW, despite having read through http://en.wikipedia.org/wiki/Serial_ATA#Cables.2C_connectors.2C_and_ports I am fuzzy on the differences between connectors, cables and ports. Thanks in advance.

    Read the article

  • Data Protection Manager System Protection Backups Failing

    - by TrueDuality
    I'm just starting to setup DPM 2010 in a test environment with a Domain Controller and a File Server. Everything seem to be working fairly well and I can get all of my backup jobs to succeed except for the "Computer\System Protection" backups. Both servers are running fully up to date 64 bit Windows Server 2008 R2 Enterprise with Service Pack 1. The error that is being provided is: DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code: 0x8078001D). (ID 30229 Details: Internal error code: 0x809909FB) This Microsoft Knowledge Base article describes the issue perfectly and provides a hotfix. I downloaded the hotfix, moved it onto the affected server, attempt to run it and receive the following error: The update is not applicable to your computer. I've verified that I have indeed downloaded the 64 bit version. According to this thread the hotfix got rolled into Service Pack 1, yet I'm still experiencing the issue. Both machines do have the Windows Server Backup feature installed. Can anybody point me in the right direction? What am I missing?

    Read the article

  • SSH hangs without password prompt

    - by Wilco
    Just reinstalled OS X and for some reason I now cannot connect to a specific machine on my local network via SSH. I can SSH to other machines on the network without any problems, and other machines can SSH to the problematic one as well. I'm not sure where to start looking for problems - can anyone point me in the right direction? Here's a dump of a connection attempt: OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to 10.0.1.7 [10.0.1.7] port 22. debug1: Connection established. debug1: identity file /Users/nwilliams/.ssh/identity type -1 debug1: identity file /Users/nwilliams/.ssh/id_rsa type -1 debug1: identity file /Users/nwilliams/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.5 debug1: match: OpenSSH_4.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '10.0.1.7' is known and matches the RSA host key. debug1: Found key in /Users/nwilliams/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic ... at this point it hangs for quite a while, and then resumes ... debug1: Unspecified GSS failure. Minor code may provide more information Server not found in Kerberos database debug1: Unspecified GSS failure. Minor code may provide more information Server not found in Kerberos database debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Trying private key: /Users/nwilliams/.ssh/identity debug1: Trying private key: /Users/nwilliams/.ssh/id_rsa debug1: Trying private key: /Users/nwilliams/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive

    Read the article

  • Dual Monitor support rdp 7 to win 7 on esxi

    - by rphilli5
    I am trying to RDP from a Windows 7 Professional dual monitor physical machine to a Windows 7 Professional VM hosted on esxi 4.0. I can get the spanning option to work to both monitors, but I have tried 3 different methods of connecting but have not been able to use true multiple monitors. At different times, I tried checking the "use all monitors" option, command line mstsc /multimon and added the line use multimon:i:1 to the .rdp file. None of these worked. Any ideas? The physical machine can connect to other Windows 7 physical machines with true multi monitor access. I also have the same issue when going from a 32bit RC1 machine to a Windows 7 Professional x64, but not when going in the reverse direction. Here's the .rdp: screen mode id:i:2 use multimon:i:1 desktopwidth:i:1440 desktopheight:i:900 session bpp:i:16 winposstr:s:0,1,341,118,1139,568 compression:i:1 keyboardhook:i:2 audiocapturemode:i:0 videoplaybackmode:i:1 connection type:i:1 displayconnectionbar:i:1 disable wallpaper:i:1 allow font smoothing:i:0 allow desktop composition:i:0 disable full window drag:i:1 disable menu anims:i:1 disable themes:i:1 disable cursor setting:i:0 bitmapcachepersistenable:i:1 full address:s:192.168.1.5 audiomode:i:0 redirectprinters:i:1 redirectcomports:i:0 redirectsmartcards:i:1 redirectclipboard:i:1 redirectposdevices:i:0 redirectdirectx:i:1 autoreconnection enabled:i:1 authentication level:i:2 prompt for credentials:i:0 negotiate security layer:i:1 remoteapplicationmode:i:0 alternate shell:s: shell working directory:s: gatewayhostname:s: gatewayusagemethod:i:4 gatewaycredentialssource:i:4 gatewayprofileusagemethod:i:0 promptcredentialonce:i:1 use redirection server name:i:0 drivestoredirect:s:

    Read the article

  • email dropbox between two mutually untrusted sites

    - by user52874
    I've an interesting problem that I thought was straightforward, but turns out I think I'm whistling down the wrong path. It has to do with (shudder) email. I thought I was done with needing to know about email guts ten years ago; I was wrong. Anyway. Simply put, I need to figure out how to relay outgoing email that is not targetted in our domain from our domain into a 'dropbox' in a DMZ, and the Other Guys can retrieve that email from their side of the DMZ and distribute it accordingly, even out to the public internet if need be. There will be no [un-established] traffic coming back to Our side from anywhere; any attempts to do so are dropped with malicious prejudice. Our side is postfix running on scilinux6.1. The DMZ boxes are redhat5.4. The Other Guys are M$ Exchange. The firewalls are set up such that data can go from Our Side downsec to the DMZ, but not upsec from the DMZ into Our Side. Same for the Other Guys. My first thinking was simply to set up postfix on a box in the DMZ and tell them to set up fetchmail or whatever the M$ equivalent is, but then I started remembering that postfix wants to actively relay email onwards, rather than hold it and wait for someone to 'reach in' and retrieve it. I'm not sure I've explained this well, but hopefully it's clear enough that someone can point me in the right direction. I seem to remember having done this before, but it was a looong time ago. thanks!

    Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >