Search Results

Search found 41582 results on 1664 pages for 'fault tolerance'.

Page 127/1664 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

  • Nagios Terminal Services check?

    - by jldugger
    Most of our servers are licensed for 2 concurrent remote desktop sessions. This is fine, so long as everyone does their administrative task and logs off, but some people accidentally close sessions (disconnect but remain logged in) instead. I know that you can force someone off with the right Admin tools, but it's a bit ugly and may hurt productivity or maybe even the server(?). I was thinking that a nightly Nagios check of remote sessions available nagging people would help enforce build discipline on the subject. Can anyone recommend a service check that can monitor terminal service availability?

    Read the article

  • SPF hardfail and DKIM failure when recipient has e-mail forwarding

    - by Beaming Mel-Bin
    I configured hardfail SPF for my domain and DKIM message signing on my SMTP server. Since this is the only SMTP server that should be used for outgoing mail from my domain, I didn't foresee any complications. However, consider the following situation: I sent an e-mail message via my SMTP server to my colleague's university e-mail. The problem is that my colleague forwards his university e-mail to his GMail account. These are the headers of the message after it reaches his GMail mailbox: Received-SPF: fail (google.com: domain of [email protected] does not designate 192.168.128.100 as permitted sender) client-ip=192.168.128.100; Authentication-Results: mx.google.com; spf=hardfail (google.com: domain of [email protected] does not designate 192.168.128.100 as permitted sender) [email protected]; dkim=hardfail (test mode) [email protected] (Headers have been sanitized to protect the domains and IP addresses of the non-Google parties) GMail checks the last SMTP server in the delivery chain against my SPF and DKIM records (rightfully so). Since the last STMP server in the delivery chain was the university's server and not my server, the check results in an SPF hardfail and DKIM failure. Fortunately, GMail did not mark the message as spam but I'm concerned that this might cause a problem in the future. Is my implementation of SPF hardfail perhaps too strict? Any other recommendations or potential issues that I should be aware of? Or maybe there is a more ideal configuration for the university's e-mail forwarding procedure? I know that the forwarding server could possibly change the envelope sender but I see that getting messy.

    Read the article

  • How to hide files in Apache 2.2 WebDAV Directory listings

    - by mdornsf
    I use Apache 2.2 as WebDAV file server to a bunch of Mac and MS Windows clients. Unfortunately both clutter the filesystem with files like .DS_Store or thumbs.db. Since hte files distract my users i want to hide them from directory listings. Unfortunately the standard way of hiding files in Apache (via IndexIgnore) seems not to work via WebDAV. Is there any other way to hide files?

    Read the article

  • Why i get Two value for ArrAffinity in my Cookie with Application Request Routing web servers setup

    - by Cédric Boivin
    Hello, I got a problem with ARR and my webfarm. I got a application develop, with a login page, when i log into my web application, i always log out. So I download fiddler to valid the affinity with my server and i see i got two value of key ArrAffinity in my cookie. Somme page got two value : ARRAffinity=2ea1e079a7e09ee9844bb1f5eca66f4f94432d3e832c073b80e0091fda6a54d4 ARRAffinity=d000ece875153770e561ea2d34d5ce85968d56e7a02104e726a25d445de25eed Other one got only have one ARRAffinity=d000ece875153770e561ea2d34d5ce85968d56e7a02104e726a25d445de25eed With this problem, i think my http request, is send to radom iis server on my farm, so the impact is i am disconnect. Anny idea ?

    Read the article

  • VPN, Tunneling to hide 'real IP' through my proxy server while showing the client IP on 'real' server side

    - by mickula
    I would like to hide my 'main server' behind the load balancer, call it 'proxy server' Although I use some closed-source software on 'main server' and it needs the client IP address to operate well. When I'm setting up some VPN connection, in that software it displays the IP address of my 'proxy server'. Is there any option to set up such tunneling or vpn to: not reveal IP of 'main server' show the IP of 'client' in 'application' on 'main server' I will be grateful for all your replies and ideas.

    Read the article

  • How do I limit one connection per user for L2TP/IPSec using OpenSwan?

    - by Han
    I've successfully set up a VPN server with openswan, pppd, and xl2tpd on Ubuntu. Everything works great, but I'm having trouble finding out how to only allow one VPN connection per user listed in the /etc/ppp/chap-secrets file? Right now a user can have unlimited connections which is worrisome to me as I've shared access to the VPN with some friends but am worried they might keep spreading the username/password.

    Read the article

  • Does Apache ever give incorrect "out of threads" errors?

    - by Eli Courtwright
    Lately our Apache web server has been giving us this error multiple times per day: [Tue Apr 06 01:07:10 2010] [error] Server ran out of threads to serve requests. Consider raising the ThreadsPerChild setting We raised our ThreadsPerChild setting from 50 to 100, but we still get the error. Our access logs indicate that these errors never even happen at periods of high load. For example, here's an excerpt from our access log (ip addresses and some urls are edited for privacy). As you can see, the above error happened at 1:07 and only a small handful of requests occurred in the several minutes leading up to the error: 99.88.77.66 - - [06/Apr/2010:00:59:33 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-icons_222222_256x240.png HTTP/1.1" 304 - 99.88.77.66 - - [06/Apr/2010:00:59:34 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_dadada_1x400.png HTTP/1.1" 200 111 99.88.77.66 - - [06/Apr/2010:00:59:34 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_dadada_1x400.png HTTP/1.1" 200 111 99.88.77.66 - mpeu [06/Apr/2010:00:59:40 -0400] "GET /some/dynamic/content HTTP/1.1" 200 145049 55.44.33.22 - mpeu [06/Apr/2010:01:06:56 -0400] "GET /other/dynamic/content HTTP/1.1" 200 12311 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/jquery-ui-1.7.1.custom.css HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-1.3.2.min.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-ui-1.7.1.custom.min.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/jquery.tablesorter.min.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/date.js HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image1.gif HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image2.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image3.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image4.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image5.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image6.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:56 -0400] "GET /WebRepository/pdfs/image7.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/pdfs/image8.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/pdfs/image9.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/pdfs/imageA.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:57 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_flat_75_ffffff_40x100.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:59 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_highlight-soft_75_cccccc_1x100.png HTTP/1.1" 304 - 55.44.33.22 - - [06/Apr/2010:01:06:59 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_e6e6e6_1x400.png HTTP/1.1" 200 110 55.44.33.22 - - [06/Apr/2010:01:06:59 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/images/ui-bg_glass_75_e6e6e6_1x400.png HTTP/1.1" 200 110 11.22.33.44 - mpeu [06/Apr/2010:01:18:03 -0400] "GET /other/dynamic/content HTTP/1.1" 200 12311 11.22.33.44 - - [06/Apr/2010:01:18:03 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-1.3.2.min.js HTTP/1.1" 304 - 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/css/smoothness/jquery-ui-1.7.1.custom.css HTTP/1.1" 200 27374 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/jquery/jquery-ui-1.7.1.custom/js/jquery-ui-1.7.1.custom.min.js HTTP/1.1" 304 - 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/jquery.tablesorter.min.js HTTP/1.1" 200 12795 11.22.33.44 - - [06/Apr/2010:01:18:04 -0400] "GET /WebRepository/date.js HTTP/1.1" 200 25809 For what it's worth, we're running the version of Apache that ships with Oracle 10g (some 2.0 version), and we're using mod_plsql to generate our dynamic content. Since the Apache server runs as a separate process and the database doesn't record any problems when this error occurs, I'm doubtful that Oracle is the problem. Unfortunately, the errors are freaking out our sysadmins, who are inclined to blame any and all problems which occur with the server on this error. Is this a known bug in Apache that I simply haven't been able to find any reference to through Google?

    Read the article

  • Linux Server hacked?

    - by user115848
    I'm trying to determine if this linex webserver/openfire server has been compromised by some form of malware or a hacker. Can you please help me determine if this server has been hacked? The snippet of logs below are from the linux server running apache. A few days ago the moodle site, which is installed on the server, started to render the apache default page. Also the access logs show some activity im not sure of. Please see logs below. 85.190.0.3 - - [02/Apr/2012:13:31:01 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:13:31:01 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 99.41.69.92 - - [02/Apr/2012:13:33:35 -0600] "GET /files/externallibs.php HTTP/1.1" 404 306 "-" "curl/7.18.0 (x86_64-pc-linux-gnu) libcurl/7.18.0 OpenSSL/0.9.8g zlib/1.2.3.3 libidn/1.1" 212.34.151.92 - - [02/Apr/2012:14:01:46 -0600] "GET /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "-" "Mozilla/4.0 (compatible; MSIE 6.0; MSIE 5.5; Windows NT 5.1) Opera 7.01 [en]" 212.34.151.92 - - [02/Apr/2012:14:01:46 -0600] "POST /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "http://173.164.35.181/phpmyadmin/scripts/setup.php\r" "Mozilla/4.0 (compatible; MSIE 6.0; MSIE 5.5; Windows NT 5.1) Opera 7.01 [en]" 82.223.140.4 - - [02/Apr/2012:14:05:03 -0600] "GET /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "-" "Mozilla/4.0 (compatible; MSIE 6.0; MSIE 5.5; Windows NT 5.1) Opera 7.01 [en]" 82.223.140.4 - - [02/Apr/2012:14:05:04 -0600] "POST /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "_http://173.164.35.181/phpmyadmin/scripts/setup.php\r" "Mozilla/4.0 (compatible; MSIE 6.0; MSIE 5.5; Windows NT 5.1) Opera 7.01 [en]" 10.0.0.100 - - [02/Apr/2012:14:25:35 -0600] "GET / HTTP/1.1" 403 5043 "-" "Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.15) Gecko/20110330 CentOS/3.6-1.el5.centos Firefox/3.6.15" 10.0.0.100 - - [02/Apr/2012:14:25:38 -0600] "GET /favicon.ico HTTP/1.1" 404 295 "-" "Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.15) Gecko/20110330 CentOS/3.6-1.el5.centos Firefox/3.6.15" 50.17.41.60 - - [02/Apr/2012:14:27:29 -0600] "HEAD /icons/apache_pb.gif HTTP/1.0" 200 - "-" "Mozilla/5.0 (compatible; NetcraftSurveyAgent/1.0; [email protected])" 85.190.0.3 - - [02/Apr/2012:14:42:33 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:14:42:33 -0600] "POST _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:14:42:33 -0600] "GET _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:14:42:36 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:03:48 -0600] "POST _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:03:48 -0600] "GET _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:03:48 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:03:48 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 66.233.63.54 - - [02/Apr/2012:15:12:19 -0600] "GET /files/externallibs.php HTTP/1.1" 404 306 "-" "Mozilla/5.0 (Windows NT 6.0; WOW64; rv:11.0) Gecko/20100101 Firefox/11.0" 70.114.161.135 - - [02/Apr/2012:15:17:12 -0600] "GET /files/externallibs.php HTTP/1.1" 404 306 "-" "Mozilla/5.0 (Windows NT 5.1; rv:11.0) Gecko/20100101 Firefox/11.0" 99.41.69.231 - - [02/Apr/2012:15:52:21 -0600] "GET /files/externallibs.php HTTP/1.1" 404 306 "-" "curl/7.18.0 (x86_64-pc-linux-gnu) libcurl/7.18.0 OpenSSL/0.9.8g zlib/1.2.3.3 libidn/1.1" 85.190.0.3 - - [02/Apr/2012:15:55:40 -0600] "GET _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:55:40 -0600] "POST _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:55:40 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:15:55:40 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 10.0.0.253 - - [02/Apr/2012:16:01:45 -0600] "GET / HTTP/1.1" 403 5043 "-" "WWW-Mechanize/1.0.0 (http://rubyforge.org/projects/mechanize/)" 10.0.0.253 - - [02/Apr/2012:16:02:27 -0600] "GET / HTTP/1.1" 403 5043 "-" "WWW-Mechanize/1.0.0 (http://rubyforge.org/projects/mechanize/)" 85.190.0.3 - - [02/Apr/2012:16:13:40 -0600] "POST _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:13:40 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:13:40 -0600] "GET _http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:13:40 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 89.135.124.125 - - [02/Apr/2012:16:20:47 -0600] "GET /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "_http://173.164.35.181/phpmyadmin/scripts/setup.php" "Opera" 89.135.124.125 - - [02/Apr/2012:16:20:48 -0600] "POST /phpmyadmin/scripts/setup.php HTTP/1.1" 404 305 "_http://173.164.35.181/phpmyadmin/scripts/setup.php" "Opera" 85.190.0.3 - - [02/Apr/2012:16:29:59 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:29:59 -0600] "GET http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:29:59 -0600] "CONNECT 213.92.8.7:31204 HTTP/1.0" 405 303 "-" "-" 85.190.0.3 - - [02/Apr/2012:16:29:59 -0600] "POST http://vlad-tepes.bofh.it/freenode-proxy-checker.txt HTTP/1.0" 404 307 "-" "-"

    Read the article

  • Assistance in setting up new APC Smart-UPS RT on a new VMware enviroment

    - by user38085
    I'm new to the realm of setting up a APC Smart-UPS RT 8000VA UPS with a management network card (AP9618). The project calls for the upgrade of the firmware for the network card to the newest and greatest. It also calls for the Powerchute Business Software to be installed with notifications setup per email for temperature, shutdown, and battery low. I know I'll have to use the serial cable to flash the firmware and install the software on one server 2003 box. Also on that server I'll have to install the software and setup the GUI (IP address) interface. Whats confusing the most is the whole process, and steps to use without taking down the network, which would be very bad. In flashing the firmware does it take down the UPS? Do i have to run BOOTP commands to setup the network card? Also no agents will be used on any of the VWware OS's and no SNMP trap will be used.

    Read the article

  • Error when reloading supervisord: unix:///tmp/supervisor.sock no such file

    - by Yarin
    I'm running supervisord on my CentOS 6 box like so, /usr/bin/supervisord -c /etc/supervisord.conf and when I launch supervisorctl all process status are fine, but if I try to reload using supervisorctl I get unix:///tmp/supervisor.sock no such file I'm using the same config file I've used successfully on other boxes, and im running everything as root. I can't undesrtand what the problem is... Config file: ; Sample supervisor config file. [unix_http_server] file=/tmp/supervisor.sock ; (the path to the socket file) ;chmod=0700 ; socket file mode (default 0700) ;chown=nobody:nogroup ; socket file uid:gid owner ;username=user ; (default is no username (open server)) ;password=123 ; (default is no password (open server)) ;[inet_http_server] ; inet (TCP) server disabled by default ;port=127.0.0.1:9001 ; (ip_address:port specifier, *:port for all iface) ;username=user ; (default is no username (open server)) ;password=123 ; (default is no password (open server)) [supervisord] logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log) logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB) logfile_backups=10 ; (num of main logfile rotation backups;default 10) loglevel=info ; (log level;default info; others: debug,warn,trace) pidfile=/tmp/supervisord.pid ; (supervisord pidfile;default supervisord.pid) nodaemon=false ; (start in foreground if true;default false) minfds=1024 ; (min. avail startup file descriptors;default 1024) minprocs=200 ; (min. avail process descriptors;default 200) ;umask=022 ; (process file creation umask;default 022) ;user=chrism ; (default is current user, required if root) ;identifier=supervisor ; (supervisord identifier, default is 'supervisor') ;directory=/tmp ; (default is not to cd during start) ;nocleanup=true ; (don't clean up tempfiles at start;default false) ;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP) ;environment=KEY=value ; (key value pairs to add to environment) ;strip_ansi=false ; (strip ansi escape codes in logs; def. false) ; the below section must remain in the config file for RPC ; (supervisorctl/web interface) to work, additional interfaces may be ; added by defining them in separate rpcinterface: sections [rpcinterface:supervisor] supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface [supervisorctl] serverurl=unix:///tmp/supervisor.sock ; use a unix:// URL for a unix socket ;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket ;username=chris ; should be same as http_username if set ;password=123 ; should be same as http_password if set ;prompt=mysupervisor ; cmd line prompt (default "supervisor") ;history_file=~/.sc_history ; use readline history if available ; The below sample program section shows all possible program subsection values, ; create one or more 'real' program: sections to be able to control them under ; supervisor. ;[program:foo] ;command=/bin/cat [program:embed_scheduler] command=/opt/web-apps/mywebsite/custom_process.py process_name=%(program_name)s_%(process_num)d numprocs=3 ;[program:theprogramname] ;command=/bin/cat ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1 ; number of processes copies to start (def 1) ;directory=/tmp ; directory to cwd to before exec (def no cwd) ;umask=022 ; umask for process (default None) ;priority=999 ; the relative start priority (default 999) ;autostart=true ; start at supervisord start (default: true) ;autorestart=unexpected ; whether/when to restart (default: unexpected) ;startsecs=1 ; number of secs prog must stay running (def. 1) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10) ;killasgroup=false ; SIGKILL the UNIX process group (def false) ;user=chrism ; setuid to this UNIX account to run the program ;redirect_stderr=true ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10) ;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0) ;stdout_events_enabled=false ; emit events on stdout writes (default false) ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10) ;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0) ;stderr_events_enabled=false ; emit events on stderr writes (default false) ;environment=A=1,B=2 ; process environment additions (def no adds) ;serverurl=AUTO ; override serverurl computation (childutils) ; The below sample eventlistener section shows all possible ; eventlistener subsection values, create one or more 'real' ; eventlistener: sections to be able to handle event notifications ; sent by supervisor. ;[eventlistener:theeventlistenername] ;command=/bin/eventlistener ; the program (relative uses PATH, can take args) ;process_name=%(program_name)s ; process_name expr (default %(program_name)s) ;numprocs=1 ; number of processes copies to start (def 1) ;events=EVENT ; event notif. types to subscribe to (req'd) ;buffer_size=10 ; event buffer queue size (default 10) ;directory=/tmp ; directory to cwd to before exec (def no cwd) ;umask=022 ; umask for process (default None) ;priority=-1 ; the relative start priority (default -1) ;autostart=true ; start at supervisord start (default: true) ;autorestart=unexpected ; whether/when to restart (default: unexpected) ;startsecs=1 ; number of secs prog must stay running (def. 1) ;startretries=3 ; max # of serial start failures (default 3) ;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2) ;stopsignal=QUIT ; signal used to kill process (default TERM) ;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10) ;killasgroup=false ; SIGKILL the UNIX process group (def false) ;user=chrism ; setuid to this UNIX account to run the program ;redirect_stderr=true ; redirect proc stderr to stdout (default false) ;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO ;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10) ;stdout_events_enabled=false ; emit events on stdout writes (default false) ;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO ;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB) ;stderr_logfile_backups ; # of stderr logfile backups (default 10) ;stderr_events_enabled=false ; emit events on stderr writes (default false) ;environment=A=1,B=2 ; process environment additions ;serverurl=AUTO ; override serverurl computation (childutils) ; The below sample group section shows all possible group values, ; create one or more 'real' group: sections to create "heterogeneous" ; process groups. ;[group:thegroupname] ;programs=progname1,progname2 ; each refers to 'x' in [program:x] definitions ;priority=999 ; the relative start priority (default 999) ; The [include] section can just contain the "files" setting. This ; setting can list multiple files (separated by whitespace or ; newlines). It can also contain wildcards. The filenames are ; interpreted as relative to this file. Included files *cannot* ; include files themselves. ;[include] ;files = relative/directory/*.ini

    Read the article

  • Mono through FastCGI on nginx

    - by Stijn
    I'm going through http://www.mono-project.com/FastCGI_Nginx and can't get it to work. The FastCGI server seems to be running. The following is from the error log: upstream sent unexpected FastCGI record: 3 while reading response header from upstream, client: 192.168.1.125, server: arch, request: "GET /Default.aspx HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "arch" Command used to start the server (I've tried server2 and server4, using a simple .NET 2.0 or .NET 4.0 project): fastcgi-mono-server2 /applications=arch:/:/var/www/test/public/ /socket=tcp:127.0.0.1:9000 /stopable=True nginx config: server { listen 80; server_name arch; access_log /var/www/test/log/access.log; error_log /var/www/test/log/error.log; location / { root /var/www/test/public; index index.html index.htm default.aspx Default.aspx; fastcgi_index Default.aspx; fastcgi_pass 127.0.0.1:9000; fastcgi_param PATH_INFO ""; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } Using xsp4 works fine, I can browse the site. I've enabled FastCGI logging, this is the output: [2012-04-15 23:51:18Z] Debug Accepting an incoming connection. [2012-04-15 23:51:18Z] Notice Beginning to receive records on connection. [2012-04-15 23:51:18Z] Debug Record received. (Type: BeginRequest, ID: 1, Length: 8) [2012-04-15 23:51:18Z] Debug Record received. (Type: Params, ID: 1, Length: 386) [2012-04-15 23:51:18Z] Debug Record received. (Type: Params, ID: 1, Length: 0) [2012-04-15 23:51:18Z] Debug Read parameter. (PATH_INFO = ) [2012-04-15 23:51:18Z] Debug Read parameter. (SCRIPT_FILENAME = /var/www/test/public/Home) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_HOST = arch) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_USER_AGENT = Mozilla/5.0 (Windows NT 6.1; WOW64; rv:11.0) Gecko/20100101 Firefox/11.0) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_ACCEPT = text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_ACCEPT_LANGUAGE = en-gb,en;q=0.5) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_ACCEPT_ENCODING = gzip, deflate) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_CONNECTION = keep-alive) [2012-04-15 23:51:18Z] Debug Read parameter. (HTTP_COOKIE = ASP.NET_SessionId=2C3D702C9B0F23F69B80820B) [2012-04-15 23:51:18Z] Error Failed to process connection. Reason: Argument cannot be null. Parameter name: s [2012-04-15 23:51:18Z] Debug Record sent. (Type: EndRequest, ID: 1, Length: 8) [2012-04-15 23:51:18Z] Debug The FastCGI connection has been closed.

    Read the article

  • Heartbeat won't successfully start up resources from a cold boot when a failed node is present

    - by Matthew
    I currently have two ubuntu servers running Heartbeat and DRBD. The servers are directory connected with a 1000Mbps crossover cable on eth1 and have access to an IP camera LAN on eth0. Now, let's say that one node is down and the remaining functional node is booting after having been shut down. The node that is still functioning won't start up heartbeat and provide access to the drbd resource from a cold boot. I have to manually restart heartbeat by sudo service heartbeat restart to get everything up and running. How can I get it to start fine from a cold start, when only one server is present? Here is the ha.cf: debug /var/log/ha-debug logfile /var/log/ha-log logfacility none keepalive 2 deadtime 10 warntime 7 initdead 60 ucast eth1 192.168.2.2 ucast eth0 10.1.10.201 node EMserver1 node EMserver2 respawn hacluster /usr/lib/heartbeat/ipfail ping 10.1.10.22 10.1.10.21 10.1.10.11 auto_failback off Some material from the syslog: harc[4604]: 2012/11/27_13:54:49 info: Running /etc/ha.d//rc.d/status status mach_down[4632]: 2012/11/27_13:54:49 info: /usr/share/heartbeat/mach_down: nice_failback: foreign resources acquired mach_down[4632]: 2012/11/27_13:54:49 info: mach_down takeover complete for node emserver2. Nov 27 13:54:49 EMserver1 heartbeat: [4586]: info: Initial resource acquisition complete (T_RESOURCES(us)) Nov 27 13:54:49 EMserver1 heartbeat: [4586]: info: mach_down takeover complete. IPaddr[4679]: 2012/11/27_13:54:49 INFO: Resource is stopped Nov 27 13:54:49 EMserver1 heartbeat: [4605]: info: Local Resource acquisition completed. harc[4713]: 2012/11/27_13:54:49 info: Running /etc/ha.d//rc.d/ip-request-resp ip-request-resp ip-request-resp[4713]: 2012/11/27_13:54:49 received ip-request-resp IPaddr::10.1.10.254 OK yes ResourceManager[4732]: 2012/11/27_13:54:50 info: Acquiring resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server IPaddr[4759]: 2012/11/27_13:54:50 INFO: Resource is stopped ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 start IPaddr[4816]: 2012/11/27_13:54:50 INFO: Using calculated nic for 10.1.10.254: eth0 IPaddr[4816]: 2012/11/27_13:54:50 INFO: Using calculated netmask for 10.1.10.254: 255.255.255.0 IPaddr[4816]: 2012/11/27_13:54:50 INFO: eval ifconfig eth0:0 10.1.10.254 netmask 255.255.255.0 broadcast 10.1.10.255 IPaddr[4804]: 2012/11/27_13:54:50 INFO: Success ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/drbddisk r0 start Filesystem[4965]: 2012/11/27_13:54:50 INFO: Resource is stopped ResourceManager[4732]: 2012/11/27_13:54:50 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 start Filesystem[5039]: 2012/11/27_13:54:50 INFO: Running start for /dev/drbd1 on /shr Filesystem[5033]: 2012/11/27_13:54:51 INFO: Success ResourceManager[4732]: 2012/11/27_13:54:51 info: Running /etc/init.d/nfs-kernel-server start Nov 27 13:55:00 EMserver1 heartbeat: [4586]: info: Local Resource acquisition completed. (none) Nov 27 13:55:00 EMserver1 heartbeat: [4586]: info: local resource transition completed. Nov 27 13:57:46 EMserver1 heartbeat: [4586]: info: Heartbeat shutdown in progress. (4586) Nov 27 13:57:46 EMserver1 heartbeat: [5286]: info: Giving up all HA resources. ResourceManager[5301]: 2012/11/27_13:57:46 info: Releasing resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server ResourceManager[5301]: 2012/11/27_13:57:46 info: Running /etc/init.d/nfs-kernel-server stop ResourceManager[5301]: 2012/11/27_13:57:46 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 stop Filesystem[5372]: 2012/11/27_13:57:46 INFO: Running stop for /dev/drbd1 on /shr Filesystem[5372]: 2012/11/27_13:57:47 INFO: Trying to unmount /shr Filesystem[5372]: 2012/11/27_13:57:47 INFO: unmounted /shr successfully Filesystem[5366]: 2012/11/27_13:57:47 INFO: Success ResourceManager[5301]: 2012/11/27_13:57:47 info: Running /etc/ha.d/resource.d/drbddisk r0 stop ResourceManager[5301]: 2012/11/27_13:57:47 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 stop IPaddr[5509]: 2012/11/27_13:57:47 INFO: ifconfig eth0:0 down IPaddr[5497]: 2012/11/27_13:57:47 INFO: Success Nov 27 13:57:47 EMserver1 heartbeat: [5286]: info: All HA resources relinquished. Nov 27 13:57:48 EMserver1 heartbeat: [4586]: info: killing /usr/lib/heartbeat/ipfail process group 4603 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBFIFO process 4589 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4590 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4591 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4592 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4593 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4594 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4595 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4596 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4597 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBWRITE process 4598 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: killing HBREAD process 4599 with signal 15 Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4589 exited. 11 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4596 exited. 10 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4598 exited. 9 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4590 exited. 8 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4595 exited. 7 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4591 exited. 6 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4592 exited. 5 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4593 exited. 4 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4597 exited. 3 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4594 exited. 2 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: Core process 4599 exited. 1 remaining Nov 27 13:57:49 EMserver1 heartbeat: [4586]: info: emserver1 Heartbeat shutdown complete. Here is some more from the log ResourceManager[2576]: 2012/11/28_16:32:42 info: Acquiring resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server IPaddr[2602]: 2012/11/28_16:32:42 INFO: Running OK Filesystem[2653]: 2012/11/28_16:32:43 INFO: Running OK Nov 28 16:32:52 EMserver1 heartbeat: [1695]: WARN: node emserver2: is dead Nov 28 16:32:52 EMserver1 heartbeat: [1695]: info: Dead node emserver2 gave up resources. Nov 28 16:32:52 EMserver1 ipfail: [1807]: info: Status update: Node emserver2 now has status dead Nov 28 16:32:52 EMserver1 heartbeat: [1695]: info: Link emserver2:eth1 dead. Nov 28 16:32:53 EMserver1 ipfail: [1807]: info: NS: We are still alive! Nov 28 16:32:53 EMserver1 ipfail: [1807]: info: Link Status update: Link emserver2/eth1 now has status dead Nov 28 16:32:55 EMserver1 ipfail: [1807]: info: Asking other side for ping node count. Nov 28 16:32:55 EMserver1 ipfail: [1807]: info: Checking remote count of ping nodes. Nov 28 16:32:57 EMserver1 heartbeat: [1695]: info: Heartbeat shutdown in progress. (1695) Nov 28 16:32:57 EMserver1 heartbeat: [2734]: info: Giving up all HA resources. ResourceManager[2751]: 2012/11/28_16:32:57 info: Releasing resource group: emserver1 IPaddr::10.1.10.254 drbddisk::r0 Filesystem::/dev/drbd1::/shr::ext4 nfs-kernel-server ResourceManager[2751]: 2012/11/28_16:32:57 info: Running /etc/init.d/nfs-kernel-server stop ResourceManager[2751]: 2012/11/28_16:32:57 info: Running /etc/ha.d/resource.d/Filesystem /dev/drbd1 /shr ext4 stop Filesystem[2829]: 2012/11/28_16:32:57 INFO: Running stop for /dev/drbd1 on /shr Filesystem[2829]: 2012/11/28_16:32:57 INFO: Trying to unmount /shr Filesystem[2829]: 2012/11/28_16:32:58 INFO: unmounted /shr successfully Filesystem[2823]: 2012/11/28_16:32:58 INFO: Success ResourceManager[2751]: 2012/11/28_16:32:58 info: Running /etc/ha.d/resource.d/drbddisk r0 stop ResourceManager[2751]: 2012/11/28_16:32:58 info: Running /etc/ha.d/resource.d/IPaddr 10.1.10.254 stop IPaddr[2971]: 2012/11/28_16:32:58 INFO: ifconfig eth0:0 down IPaddr[2958]: 2012/11/28_16:32:58 INFO: Success Nov 28 16:32:58 EMserver1 heartbeat: [2734]: info: All HA resources relinquished. Nov 28 16:32:59 EMserver1 heartbeat: [1695]: info: killing /usr/lib/heartbeat/ipfail process group 1807 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBFIFO process 1777 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1778 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1779 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1780 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1781 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1782 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1783 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1784 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1785 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBWRITE process 1786 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: killing HBREAD process 1787 with signal 15 Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1778 exited. 11 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1779 exited. 10 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1780 exited. 9 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1781 exited. 8 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1782 exited. 7 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1783 exited. 6 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1784 exited. 5 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1785 exited. 4 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1786 exited. 3 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1787 exited. 2 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: Core process 1777 exited. 1 remaining Nov 28 16:33:01 EMserver1 heartbeat: [1695]: info: emserver1 Heartbeat shutdown complete. If I restarted heartbeat at this point... the resources heartbeat controls would start up fine.... please help!

    Read the article

  • Can't create VM with virt-install on Debian wheezy

    - by chrismacp
    Cant find any answers anywhere so here goes. I am trying to CREATE a new virtual machine using the virt-install command from a console on a Debian wheezy install. I keep getting the following output: Starting install... ERROR internal error process exited while connecting to monitor: char device redirected to /dev/pts/1 inet_listen_opts: bind(ipv4,127.0.0.1,5951): Cannot assign requested address inet_listen_opts: FAILED I assumed that the port (5951 in this case) was being used judging by the error message and other sites I visited for an answer, but the same error occurs whatever number I use for the port. I cant see that port being listened upon in netstat either. Anyone have any ideas what may be wrong?

    Read the article

  • Portable server room air-con options

    - by Bridgette
    We are looking for portable industrial aircond for our server room which whould blow hot air to the sealing cavity, split-system is not an option (http://www.ikoo.com.au/Aircond.png). Something exactly like this would be ideal, but unfortunately not available in AUS: http://www.apc.com/resource/include/techspec_index.cfm?base_sku=ACPA4000&ISOCountrycode=us http://www.apcmedia.com/salestools/ASTE-6Z2RUU_R1_EN.pdf. So we pretty much looking for competing products to the APC's NetworkAIR PA4000 available in AU. ? We currently have 3 x DeLonghi Penguino PACT120, but space is limited and getting more of these is prob not ideal.

    Read the article

  • sharepoint 2007 access denied when accessing user profiles via ssp

    - by user22215
    Guys I have a really strange problem in regards to sharepoint mysites today I go into user profiles and properties in order to setup a property all of a sudden I get access denied. First off I know that I'm logged in with the correct account after the access denied I decided to click on personalization services and permissions I than get An unhandled exception occurred in the user interface.Exception Information: Cannot complete this action. I'm not seeing anything in the server application logs either. So have any of you guys seen this before is there some kind of way to grant a user account the manage profiles right permission using stsadm. BTW all other fucntions of the ssp are working fine so my question is if the user profiles and my sites of a ssp tanks how do you repair that portion of the ssp? BTW the user accounts that I'm using are site collection owners and also they have full control at the web application level. I actually ran across this interesting post but this does not really help my problem. http://blog.tylerholmes.com/2008/09/access-denied-for-site-collection.html

    Read the article

  • Proliant RAID 1 Rebuild Questions

    - by Nicholas
    I have a HP Proliant ML350 G5 server that experienced a power supply failure overnight. The power supply was replaced but unfortunately it got restarted with only 1 disk in the RAID 1 set plugged in. (The raid controller is the build in E200i). The raid BIOS then said on start-up that it had entered Interim Recovery Mode. However I would have expected it to still start up with only the 1 drive. The bios however says that it cannot find a C: drive and enters a reboot loop polling the other boot devices. First question is, is this normal behaviour not to start up on 1 disk? The second drive was then plugged in (all drives are ok) and the raid bios started an automatic rebuild on that disk. This appears to be a background process as there is no progress shown. However based on the light flashing it looks like it is working. My second question is how long will this rebuild take? (36GB 15K SAS drive). I cannot see any error messages and it looks like it is rebuilding the drive ok, but the computer still will not start-up. It still says during the boot up process that the C: drive is not found. If I wait for the rebuild to finish, is it likely to fix itself and find the C: drive? Or is there some other problem here?

    Read the article

  • RHEL 5.x SCSI Driver .img update for initrd.img

    - by zmische
    I have production DB server (RHEL 5.1) with LSI Megaraid driver loaded during setup via DUD (Driver Upd Diskett). Now I'd like to update kernel and other packeges to 5.4 version. I also downloaded new LSI SCSI driver (megasr-13.11.0922.2009-1-rhel50-u4-all.img ). Could you explain the necessary steps to make this driver visible on boot for new kernel (lets assume, that I've already update kernel to 5.4)? I read the article on Redhat - "How do I add a driver to the initrd.img". Does it contain all the steps I need? Thanks in advance!

    Read the article

  • Samba Server Make Multiple User Permissions Profiles

    - by Scriptonaut
    I have a Samba file server running, and I was wondering how I could make multiple user accounts that have different permissions. For example, at the moment I have a user, smbusr, but when I ssh to the share, I can read, write, execute, and even navigate out of the samba directory and do stuff on the actual computer. This is bad because I want to be able to give out my IP so friends/family can use the server, but I don't want them to be able to do just anything. I want to lock the user in the samba share directory(and all the sub directories). Eventually I would like several profiles such as (smbusr_R, smbusr_RW, smbguest_R, smbguest_RW). I also have a second question related to this, is SSH the best method to connect from other unix machines? What about VPN? Or simply mounting like this: mount -t ext3 -o user=username //ipaddr/share /mnt/mountpoint Is that mounting command above the same thing as a vpn? This is really confusing me. Thanks for the help guys, let me know if you need to see any files, or need anymore information.

    Read the article

  • Can PPP CHAP authentication use Cisco "Type 5" MD5 passwords?

    - by romandas
    Looking over Cisco's documentation, and RFC 1994 (PPP CHAP authentication), my initial guess is "no", because CHAP requires a cleartext password to rehash every time it sends a challenge. Is this true? If so, is there another way to configure CHAP so it doesn't use the easily-decoded type 7 passwords? The Cisco device in question uses local authentication, not a TACACS+ or RADIUS server. Would using RADIUS eliminate the problem or just move it to the RADIUS server?

    Read the article

  • mount_afp on linux, user rights

    - by Antonio Sesto
    I need to mount a remote filesystem on a linux box using the afp protocol. The linux box runs an old Debian 4. I downloaded the source code of mount_afp, compiled it and installed it with all the required packages. Then created /etc/fuse with the following command: mknod /dev/fuse c 10 229 (according to the instructions here) I can mount the remote filesystem as root by executing: mount_afp afp://USER:PASSWD@REMOTE_SERVER/FOLDER /mnt/MOUNTPOINT/ but the same command fails when run as normal user (of the local machine). After reading here and there, I created a group fuse, and added my normal user U to the group fuse: [prompt] groups U U fuse Then modified the group of /dev/fuse, that now has the following rights: 0 crwxrwx--- 1 root fuse 10, 229 Feb 8 15:33 /dev/fuse However, if the user U tries to mount the remote filesystem by using the same command as above, U gets the following error: Incorrect permissions on /dev/fuse, mode of device is 20770, uid/gid is 0/1007. But your effective uid/gid is 1004/1004 But the user U with uid 1004 has also gid 1007 (group fuse). I might think the problem is related to real/effective/etc. ID, but I do not know how to proceed and could not find any clear instructions. Could you please help me? There is also another problem. If I mount /mnt/MOUNTPOINT as root and run ls -l /mnt, I get: drwxrwxrwx 15 root root 466 Feb 8 16:34 MONTPOINT If I run ls -l /mnt as normal user U I get: ? ?????????? ? ? ? ? ? MOUNTPOINT in fact when I try to cd /mnt/MOUNTPOINT I get: $-> cd /mnt/MOUNTPOINT -sh: cd: /mnt/MOUNTPOINT: Not a directory Then I unmount /mnt/MOUNTPOINT as root and run again ls -l /mnt as normal user U I get: 0 drwxr-xr-x 2 root root 6 Feb 8 15:32 MOUNTPOINT/ After reading Frank's answer, I killed every shell/process running with privileges of user U. Still U cannot mount the remote filesystem, but the error message has changed. Now it is: "Login error: Authentication failed". The problem is not related to remote login/password since the same command works perfectly when run as root of the local machine. Since I cannot get mount_afp to work with normal users, I decided to follow mgorven's suggestion. So I run the commands: mount_afp -o allow_other afp://USER:PASSWD@REMOTE_SERVER/FOLDER /mnt/MOUNTPOINT/ and mount_afp -o user=U afp://USER:PASSWD@REMOTE_SERVER/FOLDER /mnt/MOUNTPOINT/ The mount succeeds but user U cannot access the mount point. If U executes ls -l in /mnt U@LOCAL_HOST [/mnt] $-> ls -l ls: cannot access MOUNT_POINT: Permission denied total 0 ? ?????????? ? ? ? ? ? MOUNT_POINT Is it so hard to have this utility working?

    Read the article

  • Running two wsgi applications on the same server gdal org exception with apache2/modwsgi

    - by monkut
    I'm trying to run two wsgi applications, one django and the other tilestache using the same server. The tilestache server accesses the db via django to query the db. In the process of serving tiles it performs a transform on the incoming bbox, and in this process hit's the following error. The transform works without error for the specific bbox polygon when run manually from the python shell: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 325, in __call__ mimetype, content = requestHandler(self.config, environ['PATH_INFO'], environ['QUERY_STRING']) File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 231, in requestHandler mimetype, content = getTile(layer, coord, extension) File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 84, in getTile tile = layer.render(coord, format) File "/usr/lib/python2.7/dist-packages/TileStache/Core.py", line 295, in render tile = provider.renderArea(width, height, srs, xmin, ymin, xmax, ymax, coord.zoom) File "/var/www/tileserver/providers.py", line 59, in renderArea bbox.transform(METERS_SRID) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/geos/geometry.py", line 520, in transform g = gdal.OGRGeometry(self.wkb, srid) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geometries.py", line 131, in __init__ self.__class__ = GEO_CLASSES[self.geom_type.num] File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geometries.py", line 245, in geom_type return OGRGeomType(capi.get_geom_type(self.ptr)) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geomtype.py", line 43, in __init__ raise OGRException('Invalid OGR Integer Type: %d' % type_input) OGRException: Invalid OGR Integer Type: 1987180391 I think I've hit the non thread safe issue with GDAL, metioned on the django site. Is there a way I could configure this so that it would work? Apache Version: Apache/2.2.22 (Ubuntu) mod_wsgi/3.3 Python/2.7.3 configured Apache apache2/sites-available/default: <VirtualHost *:80> ServerAdmin ironman@localhost DocumentRoot /var/www/bin LogLevel warn WSGIDaemonProcess lbs processes=2 maximum-requests=500 threads=1 WSGIProcessGroup lbs WSGIScriptAlias / /var/www/bin/apache/django.wsgi Alias /static /var/www/lbs/static/ </VirtualHost> <VirtualHost *:8080> ServerAdmin ironman@localhost DocumentRoot /var/www/bin LogLevel warn WSGIDaemonProcess tilestache processes=1 maximum-requests=500 threads=1 WSGIProcessGroup tilestache WSGIScriptAlias / /var/www/bin/tileserver/tilestache.wsgi </VirtualHost> Django Version: 1.4 httpd.conf: Listen 8080 NameVirtualHost *:8080 UPDATE I've added the a test.wsgi script to determine if the GLOBAL interpreter setting is correct, as mentioned by graham and described here: http://code.google.com/p/modwsgi/wiki/CheckingYourInstallation#Sub_Interpreter_Being_Used It seems to show the expected result: [Tue Aug 14 10:32:01 2012] [notice] Apache/2.2.22 (Ubuntu) mod_wsgi/3.3 Python/2.7.3 configured -- resuming normal operations [Tue Aug 14 10:32:01 2012] [info] mod_wsgi (pid=29891): Attach interpreter ''. I've worked around the issue for now by changing the srs used in the db so that the transform is unnecessary in tilestache app. I don't understand why the transform() method, when called in the django app works, but then in the tilestache app fails. tilestache.wsgi #!/usr/bin/python import os import time import sys import TileStache current_dir = os.path.abspath(os.path.dirname(__file__)) project_dir = os.path.realpath(os.path.join(current_dir, "..", "..")) sys.path.append(project_dir) sys.path.append(current_dir) os.environ['DJANGO_SETTINGS_MODULE'] = 'bin.settings' sys.stdout = sys.stderr # wait for the apache django lbs server to start up, # --> in order to retrieve the tilestache cfg time.sleep(2) tilestache_config_url = "http://127.0.0.1/tilestache/config/" application = TileStache.WSGITileServer(tilestache_config_url) UPDATE 2 So it turned out I did need to use a projection other than the google (900913) one in the db. So my previous workaround failed. While I'd like to fix this issue, I decided to work around the issue this type by making a django view that performs the transform needed. So now tilestache requests the data through the django app and not internally.

    Read the article

  • CentOS 5.5 APIC issue on ESX 4.1 & ML115

    - by Adnan
    Hi, I've just installed vSphere 4.1 on an HP ProLiant ML115 G5 Quad-core and am trying to install CentOS 5.5 as a guest system. However, when the guest boots up I get a calibrate_APIC_clock warning and a kernel panic message. I've come across this knowledge base article on the vmware website which suggests moving the guest onto another Intel based host (!). Funnily enough I don't have a collection of spare host servers sitting around, so can anyone suggest another solution? Alternatively, would installing an earlier version of CentOS get around this issue, or would a yum update put me back to square one? How about BIOS settings, could anything be tweaked there? Thanks.

    Read the article

  • apache mod_jk loadbalancing issue for glassfish cluster instances

    - by SibzTer
    I have a JEE ear application deployed on 2 clusters with 2 instances each on Glassfish v3.1. These are load balanced by an Apache server running on the same machine. My problem is that I am frequently seeing the following error messages frequently in the mod_jk.log file. Can you help me understand what the issue is? [Mon Jun 13 09:37:51 2011] [7116:7852] [info] ajp_process_callback::jk_ajp_common.c (1885): Writing to client aborted or client network problems [Mon Jun 13 09:37:51 2011] [7116:7852] [info] ajp_service::jk_ajp_common.c (2543): (viewerLocalInstance4) sending request to tomcat failed (unrecoverable), because of client write error (attempt=1) [Mon Jun 13 09:37:51 2011] loadbalancerLocal myServer 0.062500 [Mon Jun 13 09:37:51 2011] [7116:6512] [info] ajp_process_callback::jk_ajp_common.c (1885): Writing to client aborted or client network problems [Mon Jun 13 09:37:51 2011] [7116:6512] [info] ajp_service::jk_ajp_common.c (2543): (viewerLocalInstance4) sending request to tomcat failed (unrecoverable), because of client write error (attempt=1) [Mon Jun 13 09:37:52 2011] [7116:3080] [info] ajp_process_callback::jk_ajp_common.c (1885): Writing to client aborted or client network problems [Mon Jun 13 09:37:52 2011] [7116:3080] [info] ajp_service::jk_ajp_common.c (2543): (viewerLocalInstance4) sending request to tomcat failed (unrecoverable), because of client write error (attempt=1) [Mon Jun 13 09:38:21 2011] [7116:6512] [info] service::jk_lb_worker.c (1388): service failed, worker viewerLocalInstance4 is in local error state [Mon Jun 13 09:38:21 2011] [7116:7852] [info] service::jk_lb_worker.c (1388): service failed, worker viewerLocalInstance4 is in local error state [Mon Jun 13 09:38:21 2011] [7116:6512] [info] service::jk_lb_worker.c (1407): unrecoverable error 200, request failed. Client failed in the middle of request, we can't recover to another instance. [Mon Jun 13 09:38:21 2011] [7116:7852] [info] service::jk_lb_worker.c (1407): unrecoverable error 200, request failed. Client failed in the middle of request, we can't recover to another instance. [Mon Jun 13 09:38:21 2011] loadbalancerLocal myServer 29.046875 [Mon Jun 13 09:38:21 2011] loadbalancerLocal myServer 29.171875 [Mon Jun 13 09:38:21 2011] [7116:6512] [info] jk_handler::mod_jk.c (2620): Aborting connection for worker=loadbalancerLocal [Mon Jun 13 09:38:21 2011] [7116:7852] [info] jk_handler::mod_jk.c (2620): Aborting connection for worker=loadbalancerLocal [Mon Jun 13 09:38:21 2011] [7116:7852] [info] ajp_process_callback::jk_ajp_common.c (1885): Writing to client aborted or client network problems [Mon Jun 13 09:38:21 2011] [7116:7852] [info] ajp_service::jk_ajp_common.c (2543): (viewerLocalInstance4) sending request to tomcat failed (unrecoverable), because of client write error (attempt=1) [Mon Jun 13 09:38:21 2011] loadbalancerLocal myServer 0.156250 [Mon Jun 13 09:38:21 2011] loadbalancerLocal myServer 0.062500 [Mon Jun 13 09:38:22 2011] [7116:3080] [info] service::jk_lb_worker.c (1388): service failed, worker viewerLocalInstance4 is in local error state [Mon Jun 13 09:38:22 2011] [7116:3080] [info] service::jk_lb_worker.c (1407): unrecoverable error 200, request failed. Client failed in the middle of request, we can't recover to another instance.

    Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >