Search Results

Search found 4769 results on 191 pages for 'nirmal ram'.

Page 127/191 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

  • IIS 7 Application Pools using a different amount of memory on multiple servers behind a load balancer

    - by Jim March
    We have 6 servers in a web farm behind an F5. There are approximately 25 AppPools on each of these servers. On servers 1 - 5 the apppools are consuming approx 500MB Private Bytes, and 5GB Virtual Bytes. On server 6 the apppools are consuming approx 800MB Private Bytes, and 8GB Virtual Bytes. I can not seem to figure out why we have this difference. The code is the exact same on each box. We replicate the apphost.config between the boxes, so the Appplication Configs are identical. The only difference seems to be that this box consumes more RAM, and in turn ends up using a lot more CPU. During Black Friday we observed the CPU on server 6 spiking to 100% and noticed that the % Memory Commit was also near 100%, while the rest of the farm was at closer to 50% utilization. Pulling the 6th server from the load balancer dropped CPU/Memory on the 6th server back to normal, and did not cause a noticeable strain on the other servers.

    Read the article

  • what is the purpose of the files in this directory: /var/lib/apt/lists?

    - by Magpie
    linux lubuntu HD4000 intel ivy-bridge 8gb 1600 ram. I am getting a duplicate entry error message from synaptic package manager and it says the problem is there. I am wondering a few things: What this directory is. Whether it safe to simply delete the offending duplicates from there. Whether this is a useful new discovery... Is this where all the packages I have no use for end up and something I can edit to suit my fancy in the long run? It would be nice to be able to reduce the clutter in my package manager. Especially find a way to get rid of all the 32 bit stuff or older versions of programs I have downloaded manually elsewhere. I had meant to post this in linux! So if this is wrong place let me know and I will move it there!

    Read the article

  • Is there any way to automatically prevent running out of memory?

    - by NoahY
    I am often running out of memory on my VPS ubuntu server. I wish there was a way to simply restart apache2 when it starts running out of memory, as that seems to solve the problem. Or am I just too lazy to fix the problem? I do have limited memory on the server... Okay, more information: I'm running apache2 prefork, here are my memory settings (i've been tweaking them...): StartServers 3 MinSpareServers 1 MaxSpareServers 5 MaxClients 150 MaxRequestsPerChild 1000 The VPS has 1 GB of ram, running ubuntu 11.04 32-bit. As for scripts, I have a wordpress network with 5 blogs, an install of AskBot (a python/django stackexchange clone), and an install of MediaWiki that isn't really used. There is also a homebrewed mp3 script that accesses the getid3 library to display information on lists of podcasts, and it seems to be throwing some php errors, not sure if that's the culprit...

    Read the article

  • Poor TCP loopback throughput on Windows

    - by Yodan Tauber
    I measured the throughput of a locally bound TCP socket connection on my computer (Intel Q9550, 64 GB RAM, Windows XP 64 bit) using iperf. I got dissatisfying results (around 1.6 Gbit/s) each time, no matter how I tweaked the TCP settings (buffer length, window size, max segment size, no delay). I got similar results when I tried netperf. Now, I understand (from sources like these) that the average throughput of a loopback connection should be around 5 Gbit/s. What could be the reasons for such poor performance?

    Read the article

  • Running Debian as a Virtual Machine Host

    - by Tone
    I have a need to run a linux server to host subversion, bugzilla over Apache and also act as a file and print server. I also have a need to host Windows Server 2008 virtual machines for development purposes (I'm a .NET guy). The machine I have is a dual core AMD 2.5 Ghz w/2GB RAM. So here are my questions: 1) Should I run Debian (or some other distro) as the base AND create a Debian VM to host subversion, bugzilla and be my file/print server? or is it ok to use Debian as both my VM host and for those other reasons? 2) VMWare has a free server edition, Virtual Box also is another free option. Which one of these is better suited for what I need to do? Are there any other free (or inexpensive) alternatives out there? 3) Will I need a GUI with Debian in order to manage my VMs? 4) Can I run VMs without a GUI to conserve system resources?

    Read the article

  • Why would Linux VM in vSphere ESXi 5.5 show dramatically increased disk i/o latency?

    - by mhucka
    I'm stumped and I hope someone else will recognize the symptoms of this problem. Hardware: new Dell T110 II, dual-core Pentium G860 2.9 GHz, onboard SATA controller, one new 500 GB 7200 RPM cabled hard drive inside the box, other drives inside but not mounted yet. No RAID. Software: fresh CentOS 6.5 virtual machine under VMware ESXi 5.5.0 (build 174 + vSphere Client). 2.5 GB RAM allocated. The disk is how CentOS offered to set it up, namely as a volume inside an LVM Volume Group, except that I skipped having a separate /home and simply have / and /boot. CentOS is patched up, ESXi patched up, latest VMware tools installed in the VM. No users on the system, no services running, no files on the disk but the OS installation. I'm interacting with the VM via the VM virtual console in vSphere Client. Before going further, I wanted to check that I configured things more or less reasonably. I ran the following command as root in a shell on the VM: for i in 1 2 3 4 5 6 7 8 9 10; do dd if=/dev/zero of=/test.img bs=8k count=256k conv=fdatasync done I.e., just repeat the dd command 10 times, which results in printing the transfer rate each time. The results are disturbing. It starts off well: 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.451 s, 105 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.4202 s, 105 MB/s ... but after 7-8 of these, it then prints 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GG) copied, 82.9779 s, 25.9 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 84.0396 s, 25.6 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 103.42 s, 20.8 MB/s If I wait a significant amount of time, say 30-45 minutes, and run it again, it again goes back to 105 MB/s, and after several rounds (sometimes a few, sometimes 10+), it drops to ~20-25 MB/s again. Plotting the disk latency in vSphere's interface, it shows periods of high disk latency hitting 1.2-1.5 seconds during the times that dd reports the low throughput. (And yes, things get pretty unresponsive while that's happening.) What could be causing this? I'm comfortable that it is not due to the disk failing, because I also had configured two other disks as an additional volume in the same system. At first I thought I did something wrong with that volume, but after commenting the volume out from /etc/fstab and rebooting, and trying the tests on / as shown above, it became clear that the problem is elsewhere. It is probably an ESXi configuration problem, but I'm not very experienced with ESXi. It's probably something stupid, but after trying to figure this out for many hours over multiple days, I can't find the problem, so I hope someone can point me in the right direction. (P.S.: yes, I know this hardware combo won't win any speed awards as a server, and I have reasons for using this low-end hardware and running a single VM, but I think that's besides the point for this question [unless it's actually a hardware problem].) ADDENDUM #1: Reading other answers such as this one made me try adding oflag=direct to dd. However, it makes no difference in the pattern of results: initially the numbers are higher for many rounds, then they drop to 20-25 MB/s. (The initial absolute numbers are in the 50 MB/s range.) ADDENDUM #2: Adding sync ; echo 3 > /proc/sys/vm/drop_caches into the loop does not make a difference at all. ADDENDUM #3: To take out further variables, I now run dd such that the file it creates is larger than the amount of RAM on the system. The new command is dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct. Initial throughput numbers with this version of the command are ~50 MB/s. They drop to 20-25 MB/s when things go south. ADDENDUM #4: Here is the output of iostat -d -m -x 1 running in another terminal window while performance is "good" and then again when it's "bad". (While this is going on, I'm running dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct.) First, when things are "good", it shows this: When things go "bad", iostat -d -m -x 1 shows this:

    Read the article

  • Server Requirement and Cost for an android Application [duplicate]

    - by CagkanToptas
    This question already has an answer here: How do you do load testing and capacity planning for web sites? 3 answers Can you help me with my capacity planning? 2 answers I am working on a project which is an android application. For my project proposal, I need to calculate what is my server requirements to overcome the traffic I explained below? and if possible, I want to learn what is approximate cost of such server? I am giving the maximum expected values for calculation : -Database will be in mysql (Average service time of DB is 100-110ms in my computer[i5,4GB Ram]) -A request will transfer 150Kb data for each request on average. -Total user count : 1m -Active user count : 50k -Estimated request/sec for 1 active user : 0.06 -Total expected request/second to the server = ~5000 I am expecting this traffic between 20:00-1:00 everyday and then this values will decrease to 1/10 rest of the day. Is there any solution to this? [e.g increasing server capacity in a specific time period everyday to reduce cost]

    Read the article

  • Problems with the backup

    - by marcodv
    I did a script which run around 4 o'clock in the morning, for backup all the mysql databases and the config file for 250 linux vm. The problem is that it tooks ages for complete and more than 50% of these vm, need more than 8 hours for complete. More or less all the vm had the same configuration,I mean Same amount of ram same amount of disk space same number of cpu Debian 6.0.5 I am saving these backup on amazon s3, because is the cheapest solutions that I've found. Now my questions is: Has anyone some solutions or suggestions about that? On one blog I've read that probably the ionice and nice combination could be good work around about that. any thought?

    Read the article

  • Dual 9500GT video cards, one works

    - by bossDub
    I have two video cards, both are PCIe 512MB Nvidia 9500GTs. One is an Evga and the other is another brand. If I put them both in, the one in the top slot will work (either card). The one in the lower slot says Code 12, not enough resources to use this device. I've tried disabling Firewire and a few other things in an attempt to get more "resources". Intel DP45SG motherboard. 4G Ram. 64bit Vista. Q8200 CPU. I do not have the SLI connector.

    Read the article

  • Dell Precision 670 no booting

    - by fristson
    Our dell running xp did not boot one day and was making a beep code I had a hard time finding on the internet. It was one of the RAM sticks so i replaced it. Before that i removed the motherboard battery to see if there was a problem with the battery. Now at start up it tells me that No Logical Drives Found and then BIOS not installed!. I have read over alot of post here and other places but everyone is talking about installation of the OS. I just want it to start with what it had. Please help.

    Read the article

  • Is it possible to boot from internet?

    - by Calmarius
    Let's assume the following situation: you have a computer with empty hard disk, and you don't have a CD, floppy, pen drive nearby to boot the computer from. But you have connection to the Internet. Modern computers support network booting using PXE, but I haven't found anything regarding booting via the internet. So, is it possible to use PXE to load an image from the internet and boot it? By having a running system (even a minimal Linux) in RAM, it should be possible to install it on the hard disk, and build up a working system from here.

    Read the article

  • mysql is not using multiple cpus

    - by mhost
    Our MySQL server has been using a lot of CPU lately (it's reached 100% several times and stays there for a while) and I noticed that it the CPU load is all on one core of one cpu. I was hoping to spread that out to all 4 on my server. I have been tweaking the MySQL settings to use more ram and less cpu, but it still occasionally reaches very high CPU usage. It seems like everything about the topic refers to thread_concurrency (which I've read is a solaris only setting). What can I do in Linux? Thanks.

    Read the article

  • RAID 5 heavy IO hard freezes Ubuntu: Why?

    - by Luke has no name
    I have a software RAID 5 partition on LVM in Ubuntu (desktop, actually, but I'm using it as a server). I have been rsyncing a ton of data to it, and the computer was hard freezing, as in I needed to press "Reset". So I thought it was rsync. But I decided I'd try a dd if=/dev/zero of=/path/to/raid5 and sure enough, the computer locked up. Did an identical dd to a JBOD partition on the same machine, and it didn't crash. Assuming a clean RAID5 partition, tri-core processor 2GB of ram, 6GB swap, what could be causing this?

    Read the article

  • Dynamically changing one-node Cassandra cluster to two nodes

    - by Jason Axelson
    So I have an application that will be very dormant most of the time but will need high-bursting a few days out of the month. Since we are deploying on EC2 I would like to keep only one Cassandra server up most of the time and then on burst days I want to bring one more server up (with more RAM and CPU than the first) to help serve the load. What is the best way to do this? Should I take a different approach? Some notes about what I plan to do: Bring the node up and repair it immediately After the burst time is over decommission the powerful node Use the always-on server as the seed node My main question is how to get the nodes to share all the data since I want a replication factor of 2 (so both nodes have all the data) but that won't work while there is only one server. Should I bring up 2 extra servers instead of just one?

    Read the article

  • Dell Inspiron 530 - SSD Worth it?

    - by DrFredEdison
    I'm going to be upgrading my Dell Inspiron 530 (2.0 Ghz Intel Dual Core CPU, 3 GB RAM) to windows 7 soon, and rather than backup and reformat my existing drive, I'm planning on getting a 2nd drive to replace my current primary, and moving it to a secondary. Thus, this seems like an excellent time to get a solid-state drive, if its going to be worth it. As far as I can tell this machine has a SATA-I controller, and I'm unsure if I'll see a noticeable performance increase with an SSD without going to SATA-II. So I have a three part question here given all that: Will spending the money on a SSD be worth it if hook it into a SATA-I controller? Is it reasonable to upgrade the controller on this machine to a SATA-II controller? Given that this PC is kind of old to begin with, am I better off performance wise to just stick with a faster HDD?

    Read the article

  • Motherboard not recognizing memory anymore

    - by root
    I bought some new RAM and installed it on my motherboard. But, the BIOS would not post. There's an LED on my motherboard that shows error codes, and it showed the error: No usable memory detected. So, I removed the new memory and reinstalled the old memory, thus restoring the computer back to its original configuration. But, the BIOS still would not post, still giving the error: No usable memory detected. I've ensured that the memory and power headers are seated properly. I've tried all possible combinations of memory slots, and I've also reset the CMOS, but the error remains the same. The computer was working fine before I tried upgrading the memory, and I originally assembled the computer myself. What are some possible causes of this problem?

    Read the article

  • How to fix Asus Eee PC 900 startup issues after failure?

    - by EBrown
    My Asus Eee PC 900 shows no signs of life. I push the power button and get no response from anything. No lights, no power, no boot-up screen. It has been like this since I received it from a friend. I asked her what happened and she said that smoke came from the keyboard, it shut down and hasnt turned on since. I have tried removing and cleaning the RAM, the computer charger still connects and works, but the battery receives no charge and the computer won't power on. Any ideas as to what is going on?

    Read the article

  • RCA monitor won't display highest resolution when NVidia drivers are installed

    - by novellterminator
    My computer is a dual-monitor setup. It won't display my second monitor's highest res... In fact, it will only display one resolution. Anything higher or lower makes the monitor not show the screen. I've had this problem with this computer, and I upgraded almost all my components (cpu, RAM, mobo, and video card included) and I still have this problem with my new setup. This leads me to believe it's a problem with my monitor and the NVidia driver together. Any thoughts on what can be done? The manufacturer of the monitor doesn't make a driver for this monitor. I used to run Windows Vista and now my new setup runs Windows 7.

    Read the article

  • Any way to tell apart a CPU defect from a mainboard defect?

    - by Pekka
    I have a fairly modern desktop computer, an AMD Athlon II X2 based silent PC, that does not work. When turned on, it will start physically (all fans are rotating, disks start up...) but not give a signal on any of the graphics ports (DVI, VGA, and HDMI, I tried all three). Also, the reset button does not seem to have any effect. I have stripped the mainboard bare of all SATA connections, extension cards, and the one 2GB RAM chip to eliminate them as the problem source, but to no avail, so I think it's fair to assume it's either the mainboard or the processor that are at fault. However, I have neither a replacement mainboard, nor a replacement processor handy to identify which one is broken. The cause of the defect is unknown, so for all I know, it could be both. Therefore, I'm reluctant to buy replacement hardware blindly before knowing more. Is there any way to further diagnose (or at least get some indication) which component is broken without buying replacement hardware?

    Read the article

  • "Cannot allocate memory " error whle copying data from window to ubuntu

    - by John
    I have Ubuntu 9.10 installed inside VM of server 2008. WHen i try to copy the data from the network and paste insid ethe Ubuntu it says error called "Cannot allocate memory " I have 3GB RAM attached to the Ubuntu I tried above suggestion but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem???? I tried Set the following registry key to ’1': HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache and set the following registry key to ’3': HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size but still im unbale to copy file from my host machine i.e. Windows XP to my Ubuntu machine ( which is at Virtual Machine) Im trying to copy jdk-1_5_0_22-linux-i586.bin file whose size is 47.4 MB Is there any other work around for this problem????

    Read the article

  • Freeze during Battlefield 3 - Probable Hardware issue?

    - by HendsteR
    my friend's notebook frequently freezes during BF3 sessions since ~1 1/2 months. It runs Win764Bit and he already reinstalled windows during the process, it didn't help. So we guess it might probably be a hardware issue. Now the question - which part of the hardware could effect a total freeze of the system WITHOUT getting a bluescreen? Or are there any known software issues he could also try? The hardware specs are: Acer 7745G Intel i7 720QM AMD Mobility 5850HD - Running Catalyst 11.6 now btw. (all drivers tested from 11.2 to 12.6 though) 4GB Ram 1.333MHz Oh and yeah, he just added that it crashes playing Diablo3 from time to time, too. Please help :)

    Read the article

  • How can i simulate the production servers in my home for linux VMs [closed]

    - by user31
    I am thinking of making the small simulation of how the big companies run their system in my home environment to get the feeling. I have the server with 8GB ram , quad core processor. I am thinking of following setup if thats [possible because i have not worked with biger companies , so i want to know how can i do that I am thinking of creating 5 virtual machines VM1 will be database server and will have all databases like MySQL , postgreSQL , sqlite , mongodb and Oracle VM2 will be the web server and will have Apache and Tomcat installed VM3 will be the Filse server where i will have all the web sites file VM4 , i am thinking of as main box where i can install ptyon php java j2ee sites but not sure VM5 will have the server 22008 for c# .net applications my main idea is to be able to host the sites in php, python , java j2ee with spring Is my setup ok or i am missing few things. Please guide me with correct setup so that i can learn stuff

    Read the article

  • How to make MySQL utilize available system resources, or find "the real problem"?

    - by anonymous coward
    This is a MySQL 5.0.26 server, running on SuSE Enterprise 10. This may be a Serverfault question. The web user interface that uses these particular queries (below) is showing sometimes 30+, even up to 120+ seconds at the worst, to generate the pages involved. On development, when the queries are run alone, they take up to 20 seconds on the first run (with no query cache enabled) but anywhere from 2 to 7 seconds after that - I assume because the tables and indexes involved have been placed into ram. From what I can tell, the longest load times are caused by Read/Update Locking. These are MyISAM tables. So it looks like a long update comes in, followed by a couple 7 second queries, and they're just adding up. And I'm fine with that explanation. What I'm not fine with is that MySQL doesn't appear to be utilizing the hardware it's on, and while the bottleneck seems to be the database, I can't understand why. I would say "throw more hardware at it", but we did and it doesn't appear to have changed the situation. Viewing a 'top' during the slowest times never shows much cpu or memory utilization by mysqld, as if the server is having no trouble at all - but then, why are the queries taking so long? How can I make MySQL use the crap out of this hardware, or find out what I'm doing wrong? Extra Details: On the "Memory Health" tab in the MySQL Administrator (for Windows), the Key Buffer is less than 1/8th used - so all the indexes should be in RAM. I can provide a screen shot of any graphs that might help. So desperate to fix this issue. Suffice it to say, there is legacy code "generating" these queries, and they're pretty much stuck the way they are. I have tried every combination of Indexes on the tables involved, but any suggestions are welcome. Here's the current Create Table statement from development (the 'experimental' key I have added, seems to help a little, for the example query only): CREATE TABLE `registration_task` ( `id` varchar(36) NOT NULL default '', `date_entered` datetime NOT NULL default '0000-00-00 00:00:00', `date_modified` datetime NOT NULL default '0000-00-00 00:00:00', `assigned_user_id` varchar(36) default NULL, `modified_user_id` varchar(36) default NULL, `created_by` varchar(36) default NULL, `name` varchar(80) NOT NULL default '', `status` varchar(255) default NULL, `date_due` date default NULL, `time_due` time default NULL, `date_start` date default NULL, `time_start` time default NULL, `parent_id` varchar(36) NOT NULL default '', `priority` varchar(255) NOT NULL default '9', `description` text, `order_number` int(11) default '1', `task_number` int(11) default NULL, `depends_on_id` varchar(36) default NULL, `milestone_flag` varchar(255) default NULL, `estimated_effort` int(11) default NULL, `actual_effort` int(11) default NULL, `utilization` int(11) default '100', `percent_complete` int(11) default '0', `deleted` tinyint(1) NOT NULL default '0', `wf_task_id` varchar(36) default '0', `reg_field` varchar(8) default '', `date_offset` int(11) default '0', `date_source` varchar(10) default '', `date_completed` date default '0000-00-00', `completed_id` varchar(36) default NULL, `original_name` varchar(80) default NULL, PRIMARY KEY (`id`), KEY `idx_reg_task_p` (`deleted`,`parent_id`), KEY `By_Assignee` (`assigned_user_id`,`deleted`), KEY `status_assignee` (`status`,`deleted`), KEY `experimental` (`deleted`,`status`,`assigned_user_id`,`parent_id`,`date_due`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 And one of the ridiculous queries in question: SELECT users.user_name assigned_user_name, registration.FIELD001 parent_name, registration_task.status status, registration_task.date_modified date_modified, registration_task.date_due date_due, registration.FIELD240 assigned_wf, if(LENGTH(registration_task.description)>0,1,0) has_description, registration_task.* FROM registration_task LEFT JOIN users ON registration_task.assigned_user_id=users.id LEFT JOIN registration ON registration_task.parent_id=registration.id where (registration_task.status != 'Completed' AND registration.FIELD001 LIKE '%' AND registration_task.name LIKE '%' AND registration.FIELD060 LIKE 'GN001472%') AND registration_task.deleted=0 ORDER BY date_due asc LIMIT 0,20; my.cnf - '[mysqld]' section. [mysqld] port = 3306 socket = /var/lib/mysql/mysql.sock skip-locking key_buffer = 384M max_allowed_packet = 100M table_cache = 2048 sort_buffer_size = 2M net_buffer_length = 100M read_buffer_size = 2M read_rnd_buffer_size = 160M myisam_sort_buffer_size = 128M query_cache_size = 16M query_cache_limit = 1M EXPLAIN above query, without additional index: +----+-------------+-------------------+--------+--------------------------------+----------------+---------+------------------------------------------------+---------+-----------------------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+-------------------+--------+--------------------------------+----------------+---------+------------------------------------------------+---------+-----------------------------+ | 1 | SIMPLE | registration_task | ref | idx_reg_task_p,status_assignee | idx_reg_task_p | 1 | const | 1067354 | Using where; Using filesort | | 1 | SIMPLE | registration | eq_ref | PRIMARY,gbl | PRIMARY | 8 | sugarcrm401.registration_task.parent_id | 1 | Using where | | 1 | SIMPLE | users | ref | PRIMARY | PRIMARY | 38 | sugarcrm401.registration_task.assigned_user_id | 1 | | +----+-------------+-------------------+--------+--------------------------------+----------------+---------+------------------------------------------------+---------+-----------------------------+ EXPLAIN above query, with 'experimental' index: +----+-------------+-------------------+--------+-----------------------------------------------------------+------------------+---------+------------------------------------------------+--------+-----------------------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+-------------------+--------+-----------------------------------------------------------+------------------+---------+------------------------------------------------+--------+-----------------------------+ | 1 | SIMPLE | registration_task | range | idx_reg_task_p,status_assignee,NewIndex1,tcg_experimental | tcg_experimental | 259 | NULL | 103345 | Using where; Using filesort | | 1 | SIMPLE | registration | eq_ref | PRIMARY,gbl | PRIMARY | 8 | sugarcrm401.registration_task.parent_id | 1 | Using where | | 1 | SIMPLE | users | ref | PRIMARY | PRIMARY | 38 | sugarcrm401.registration_task.assigned_user_id | 1 | | +----+-------------+-------------------+--------+-----------------------------------------------------------+------------------+---------+------------------------------------------------+--------+-----------------------------+

    Read the article

  • mysql is not using multiple cpus

    - by helpmhost
    Hi, Our MySQL server has been using a lot of CPU lately (it's reached 100% several times and stays there for a while) and I noticed that it the CPU load is all on one core of one cpu. I was hoping to spread that out to all 4 on my server. I have been tweaking the MySQL settings to use more ram and less cpu, but it still occasionally reaches very high CPU usage. It seems like everything about the topic refers to thread_concurrency (which I've read is a solaris only setting). What can I do in Linux? Thanks.

    Read the article

  • Lightest way to run Google Hangouts Chrome app on Mac

    - by jadengore
    I recently transitioned to Safari because I'm really tired of how Chrome hogs memory and drains my battery like crazy. The only thing that has been keeping the Chrome icon open is the Hangouts plugin. Basically, I am looking for the lightest way to run Hangouts on my Mac. By light, I mean the least amount of RAM usage, and preferably a way to do it without Chrome open/light version of Chrome that only opens extensions. Any suggestions? EDIT: Another thing I noticed was that Hangouts ignores your default browser if links are sent to you by chat, and when clicked they open in Chrome. My question doesn't relate to this at all, but I found it interesting...

    Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >