Search Results

Search found 3513 results on 141 pages for 'raw sockets'.

Page 127/141 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• Issue with Netgear GS108T Managed Switch and Jumbo Frames

  - by Richie086

  I recently purchased a Netgear GS108T managed switch and I am trying to configure jumbo packets between my NAS (Thecus N4100Pro), PC and managed switch. I should mention the fact that I was able to use jumbo frames between my PC and NAS before I purchased the switch without issue. My Desktop has a wired gigabit NIC (Intel 82579V Gigabit) and has the ability to configure jumbo frames (see pic) that are either 9014 bytes or 4088 bytes. I choose 9014 bytes for the jumbo frame size My NAS supports jumbo frames as well, and is configured to use 9014 as the frame size. When I go into my Netgear managed switch and set the frame size to 9014 on the ports I am using for my PC and NAS. See image As soon as I hit apply in the web interface, I loose my connection to the SMB shares on my NAS and I can no longer connect to the web admin interface for my NAS. The really strange thing is I can ping my NAS via the ping command, but when I try to connect to the web interface on port 80 or port 443 the page never loads. I did a scan from my PC to my NAS using nmap and I can see the following ports open PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 631/tcp open ipp 2000/tcp open cisco-sccp 2049/tcp open nfs 3260/tcp open iscsi 49152/tcp open unknown MAC Address: 00:14:FD:15:00:44 (Thecus Technology) Read data files from: C:\Program Files (x86)\Nmap Nmap done: 1 IP address (1 host up) scanned in 211.97 seconds Raw packets sent: 1 (28B) | Rcvd: 1 (28B) Anyone have any idea what is going on here? Why is nmap able to detect the ports are open and listening for http, https and file sharing but I cant connect when all devices have jumbo packets enabled? Stranger still - I did a packet capture using wireshark while the nmap scan was running and filtered so I only saw converstations between my PC and my NAS. Here are the packet details from my scan Only 4 packets over 5k bytes? What is going on here? Do I not need to configure jumbo frame sizes on the switch? I have an internet connection from my pc to the switch to my router - I just cannot connect to my NAS. I just checked on my iPhone and I am able to open my NAS web admin interface without issue on my iPhone! WTF!!!!!! Let me know if you need more details..

  Read the article

• bluetooth file send.

  - by cheesebunz

  i'm new to bluetooth development and i found the 32netfeet . Right now i'm able to search for bluetooth devices nearby and connect to them but how do i send a file e.g SendTest.txt? I tried buttonclick event using the OBEX but i don't understand this is my example code: using InTheHand.Net; using InTheHand.Net.Sockets; using InTheHand.Net.Bluetooth; namespace BluetoothIntheHand { public partial class Form2 : Form { private Guid service = BluetoothService.DialupNetworking; private BluetoothClient bluetoothClient; public Form2() { InitializeComponent(); } private void btnSearch_Click(object sender, EventArgs e) { BluetoothRadio.PrimaryRadio.Mode = RadioMode.Discoverable; BluetoothRadio myRadio = BluetoothRadio.PrimaryRadio; lblSearch.Text = "" + myRadio.LocalAddress.ToString(); bluetoothClient = new BluetoothClient(); Cursor.Current = Cursors.WaitCursor; BluetoothDeviceInfo[] bluetoothDeviceInfo = { }; bluetoothDeviceInfo = bluetoothClient.DiscoverDevices(10); comboBox1.DataSource = bluetoothDeviceInfo; comboBox1.DisplayMember = "DeviceName"; comboBox1.ValueMember = "DeviceAddress"; comboBox1.Focus(); Cursor.Current = Cursors.Default; } private void btnConnect_Click(object sender, EventArgs e) { if (comboBox1.SelectedValue != null) { try { bluetoothClient.Connect(new BluetoothEndPoint((BluetoothAddress)comboBox1.SelectedValue, service)); MessageBox.Show("Connected"); } catch (Exception ex) { MessageBox.Show(ex.Message); } } } private void btnSend_Click(object sender, EventArgs e) { bluetoothClient.Connect(new BluetoothEndPoint((BluetoothAddress)comboBox1.SelectedValue, service)); String addr = "112233445566"; Uri uri = new Uri("obex://"+@"SendTest.txt"); ObexWebRequest req= new ObexWebRequest(uri); ObexWebResponse rsp; } I found the guide but don't really know how to convert to C# ' The host part of the URI is the device address, e.g. IrDAAddress.ToString(), ' and the file part is the OBEX object name. Dim addr As String = "112233445566" Dim uri As New Uri("obex://" & addr & "/HelloWorld2.txt") Dim req As New ObexWebRequest(uri) Using content As Stream = req.GetRequestStream() ' Using a StreamWriter to write text to the stream... Using wtr As New StreamWriter(content) wtr.WriteLine("Hello World GetRequestStream") wtr.WriteLine("Hello World GetRequestStream 2") wtr.Flush() ' Set the Length header value req.ContentLength = content.Length End Using ' In this case closing the StreamWriter also closed the Stream, but ... End Using Dim rsp As ObexWebResponse = CType(req.GetResponse(),ObexWebResponse) Console.WriteLine("Response Code: {0} (0x{0:X})", rsp.StatusCode)

  Read the article

• Yahoo Webmail - Garbled Quote Text

  - by baultista

  I've encountered a very strange problem when trying to reply to e-mail via my Yahoo Web Mail from a family member's computer. She received an e-mail from a client who is using Microsoft Outlook. When I receive the message it looks perfectly fine in my browser and I can read it. However, when I try to reply to the e-mail the quoted text looks as such: > #yiv9181642880 p.yiv9181642880msonormal1114, #yiv9181642880 > li.yiv9181642880msonormal1114, #yiv9181642880 > div.yiv9181642880msonormal1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msoacetate1114, #yiv9181642880 > li.yiv9181642880msoacetate1114, #yiv9181642880 > div.yiv9181642880msoacetate1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880emailquote1114, #yiv9181642880 > li.yiv9181642880emailquote1114, #yiv9181642880 > div.yiv9181642880emailquote1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msochpdefault1114, > #yiv9181642880 li.yiv9181642880msochpdefault1114, > #yiv9181642880 div.yiv9181642880msochpdefault1114 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} > #yiv9181642880 p.yiv9181642880msonormal53, #yiv9181642880 > li.yiv9181642880msonormal53, #yiv9181642880 > div.yiv9181642880msonormal53 > {margin-right:0in;margin-left:0in;font-size:12.0pt;} It's the strangest thing. It doesn't happen with all e-mails except this particular one. At a glance it almost looks like raw CSS code that's being displayed, but I really can't understand why. So far I have tried the following: Try a different browser, both IE11 and Google Chrome Check the browser encoding settings Check Yahoo Web Mail's encoding/font settings My only other guess is that the client used some weird font or formatting on the e-mail that is throwing the message body out of sync. Unfortunately for my family member, she is a contractor working with a medium-sized company that refuses to provide her with a domain e-mail address, so she is forced to conduct business this way. Simply asking the sender to use a more widely supported font wouldn't be an acceptable solution here. Any thoughts?

  Read the article

• MySQL Execution Time Spikes

  - by Brett

  I am having issues with MySQL all of the sudden today. Details: OS: CentOS release 5.7 Server type: Parallels virtuozzo container running on mediatemple DV 4.0 package Average total memory usage: <500mb Total memory usage allowed: 1gb (part of shared pool for emergency only, users are only guaranteed 500mb) Processor: 1ghz Main database sizes with most usage: 275mb & 107mb server stack: nginx 1.0.10, mysql 5.1.54, php 5.3.8 with php-fpm innodb_buffer_pool_size=100M php-fpm max children: 5 Webapps: custom php-based sites, magento & drupal slow query timeout is set to 1 second Steps I completed towards diagnosis: Cannot restart container yet - I will try later tonight when our domestic traffic has dropped Enabled mysql and php-fpm slowlog. Found functions that did DB queries in php-fpm slowlog were taking over 1s to complete at times Found some simple queries in mysql slowlog taking well over 1s to complete that should take less than 1s. Most interesting - execution time seems to spike at times. A query will take .2s a couple times, then one time it will take 8s to run the same query. These results were verified by running raw SQL queries through mysql command line. Top does not reveal anything too interesting Only resource related thing i can see is load averages much higher than normal Up until today, mysql has been fine, there have been no major changes to the db since yesterday. Sometimes things are so bad, I am seeing bad gateway errors after 60s of execution time. Innodb is doing on average 300-1400 reads/sec. Mysql is doing 3-10 queries/sec slow query count in 2 hours uptime is 171 (with slow timeout at 1 second) Tried restarting mysql, nginx, php-fpm multiple times For example: UPDATE `catalogsearch_query` SET `query_text` = 'EW 90', `num_results` = '7532', `popularity` = '99180', `redirect` = NULL, `synonym_for` = NULL, `store_id` = '1', `display_in_terms` = '1', `is_active` = '1', `is_processed` = '1', `updated_at` = '2012-05-08 21:38:31' WHERE (query_id='31'); This query took 17sec to complete one time, rest of the time around .079 sec. But varies, sometimes 1sec, sometimes .004 sec. This is running the same query, over and over with a couple seconds time in between each. Most tables are innodb, and sometimes I noticed the lock time taking 90% of the query execution time, but most of the time lock time is insignificant. Any idea what's going on here?

  Read the article

• Problem getting Java Streams in HP Tandem (Non-Stop)

  - by AndreaG

  Hi. We are porting a simple Java application between Tandem NonStop systems, from G-Series to H-Series. Java version is 1.5.0_02. When performing basic I/O tasks like getting output stream from or opening a client socket, we receive exceptions like java.io.IOException: Value out of range or java.net.SocketException: Value out of range ("value out of range" is Tandem native jargon for, well, quite everything I suppose). Has anybody got similar issues? i.e. I/O corruption while for example messing with JNI? I suppose there is something wrong with the system, but where might it be? Thank you. EDIT: adding snippets as requested sample snippet (a) - using Runtime.exec () (adapted) Properties envVars = new Properties(); Process p = r.exec("/bin/env"); envVars.load(p.getInputStream()); Stack trace (a): java.io.IOException: Value out of range (errno:4034) at java.io.FileInputStream.readBytes(Native Method) at java.io.FileInputStream.read(FileInputStream.java:194) at java.lang.UNIXProcess$DeferredCloseInputStream.read(UNIXProcess.java:221) at java.io.BufferedInputStream.read1(BufferedInputStream.java:254) at java.io.BufferedInputStream.read(BufferedInputStream.java:313) at sun.nio.cs.StreamDecoder$CharsetSD.readBytes(StreamDecoder.java:411) at sun.nio.cs.StreamDecoder$CharsetSD.implRead(StreamDecoder.java:453) at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:183) at java.io.InputStreamReader.read(InputStreamReader.java:167) at java.io.BufferedReader.fill(BufferedReader.java:136) at java.io.BufferedReader.readLine(BufferedReader.java:299) at java.io.BufferedReader.readLine(BufferedReader.java:362) at util.Environment.getVariables(Environment.java:39) Last line fails, and output gets redirected to console (!). sample snippet (b) - using HttpURLConnection: public WorkerThread (HttpURLConnection conn, String requestData, Logger logger) { this.conn = conn; ... } public void run () { OutputStream out = conn.getOutputStream (); } Stack trace (b): java.net.SocketException: Value out of range (errno:4034) at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.Socket.connect(Socket.java:507) at sun.net.NetworkClient.doConnect(NetworkClient.java:155) at sun.net.www.http.HttpClient.openServer(HttpClient.java:365) at sun.net.www.http.HttpClient.openServer(HttpClient.java:477) at sun.net.www.protocol.https.HttpsClient.<init>(HttpsClient.java:280) at sun.net.www.protocol.https.HttpsClient.New(HttpsClient.java:337) at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(AbstractDelegateHttpsURLConnection.java:176) at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:736) at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(AbstractDelegateHttpsURLConnection.java:162) at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:828) at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(HttpsURLConnectionImpl.java:230) Case (a) can be avoided because it was a workaround for other issues with previous JRE version (!), but same behaviour with sockets is really nasty.

  Read the article

• Linux RAID-0 performance doesn't scale up over 1 GB/s

  - by wazoox

  I have trouble getting the max throughput out of my setup. The hardware is as follow : dual Quad-Core AMD Opteron(tm) Processor 2376 16 GB DDR2 ECC RAM dual Adaptec 52245 RAID controllers 48 1 TB SATA drives set up as 2 RAID-6 arrays (256KB stripe) + spares. Software : Plain vanilla 2.6.32.25 kernel, compiled for AMD-64, optimized for NUMA; Debian Lenny userland. benchmarks run : disktest, bonnie++, dd, etc. All give the same results. No discrepancy here. io scheduler used : noop. Yeah, no trick here. Up until now I basically assumed that striping (RAID 0) several physical devices should augment performance roughly linearly. However this is not the case here : each RAID array achieves about 780 MB/s write, sustained, and 1 GB/s read, sustained. writing to both RAID arrays simultaneously with two different processes gives 750 + 750 MB/s, and reading from both gives 1 + 1 GB/s. however when I stripe both arrays together, using either mdadm or lvm, the performance is about 850 MB/s writing and 1.4 GB/s reading. at least 30% less than expected! running two parallel writer or reader processes against the striped arrays doesn't enhance the figures, in fact it degrades performance even further. So what's happening here? Basically I ruled out bus or memory contention, because when I run dd on both drives simultaneously, aggregate write speed actually reach 1.5 GB/s and reading speed tops 2 GB/s. So it's not the PCIe bus. I suppose it's not the RAM. It's not the filesystem, because I get exactly the same numbers benchmarking against the raw device or using XFS. And I also get exactly the same performance using either LVM striping and md striping. What's wrong? What's preventing a process from going up to the max possible throughput? Is Linux striping defective? What other tests could I run?

  Read the article

• Is it possible to change HANDLE that has been opened for synchronous I/O to be opened for asynchrono

  - by Martin Dobšík

  Dear all, Most of my daily programming work in Windows is nowadays around I/O operations of all kind (pipes, consoles, files, sockets, ...). I am well aware of different methods of reading and writing from/to different kinds of handles (Synchronous, asynchronous waiting for completion on events, waiting on file HANDLEs, I/O completion ports, and alertable I/O). We use many of those. For some of our applications it would be very useful to have only one way to treat all handles. I mean, the program may not know, what kind of handle it has received and we would like to use, let's say, I/O completion ports for all. So first I would ask: Let's assume I have a handle: HANDLE h; which has been received by my process for I/O from somewhere. Is there any easy and reliable way to find out what flags it has been created with? The main flag in question is FILE_FLAG_OVERLAPPED. The only way known to me so far, is to try to register such handle into I/O completion port (using CreateIoCompletionPort()). If that succeeds the handle has been created with FILE_FLAG_OVERLAPPED. But then only I/O completion port must be used, as the handle can not be unregistered from it without closing the HANDLE h itself. Providing there is an easy a way to determine presence of FILE_FLAG_OVERLAPPED, there would come my second question: Is there any way how to add such flag to already existing handle? That would make a handle that has been originally open for synchronous operations to be open for asynchronous. Would there be a way how to create opposite (remove the FILE_FLAG_OVERLAPPED to create synchronous handle from asynchronous)? I have not found any direct way after reading through MSDN and googling a lot. Would there be at least some trick that could do the same? Like re-creating the handle in same way using CreateFile() function or something similar? Something even partly documented or not documented at all? The main place where I would need this, is to determine the the way (or change the way) process should read/write from handles sent to it by third party applications. We can not control how third party products create their handles. Dear Windows gurus: help please! With regards Martin

  Read the article

• Problem connecting to postgres with Kohana 3 database module on OS X Snow Leopard

  - by Bart Gottschalk

  Environment: Mac OS X 10.6 Snow Leopard PHP 5.3 Kohana 3.0.4 When I try to configure and use a connection to a postgresql database on localhost I get the following error: ErrorException [ Warning ]: mysql_connect(): [2002] No such file or directory (trying to connect via unix:///var/mysql/mysql.sock) Here is the configuration of the database in /modules/database/config/database.php (note the third instance named 'pgsqltest') return array ( 'default' => array ( 'type' => 'mysql', 'connection' => array( /** * The following options are available for MySQL: * * string hostname * string username * string password * boolean persistent * string database * * Ports and sockets may be appended to the hostname. */ 'hostname' => 'localhost', 'username' => FALSE, 'password' => FALSE, 'persistent' => FALSE, 'database' => 'kohana', ), 'table_prefix' => '', 'charset' => 'utf8', 'caching' => FALSE, 'profiling' => TRUE, ), 'alternate' => array( 'type' => 'pdo', 'connection' => array( /** * The following options are available for PDO: * * string dsn * string username * string password * boolean persistent * string identifier */ 'dsn' => 'mysql:host=localhost;dbname=kohana', 'username' => 'root', 'password' => 'r00tdb', 'persistent' => FALSE, ), 'table_prefix' => '', 'charset' => 'utf8', 'caching' => FALSE, 'profiling' => TRUE, ), 'pgsqltest' => array( 'type' => 'pdo', 'connection' => array( /** * The following options are available for PDO: * * string dsn * string username * string password * boolean persistent * string identifier */ 'dsn' => 'mysql:host=localhost;dbname=pgsqltest', 'username' => 'postgres', 'password' => 'dev1234', 'persistent' => FALSE, ), 'table_prefix' => '', 'charset' => 'utf8', 'caching' => FALSE, 'profiling' => TRUE, ), ); And here is the code to create the database instance, create a query and execute the query: $pgsqltest_db = Database::instance('pgsqltest'); $query = DB::query(Database::SELECT, 'SELECT * FROM test')->execute(); I'm continuing to research a solution for this error but thought I'd ask to see if someone else has already found a solution. Any ideas are welcome. One other note is that I know my build of PHP can access this postgresql db since I'm able to manage the db using phpPgAdmin. But I have yet to determine what phpPgAdmin is doing differently to connect to the db than what Kohana 3 is attempting. Bart

  Read the article

• Binary socket and policy file in Flex

  - by Daniil

  Hi, I'm trying to evaluate whether Flex can access binary sockets. Seems that there's a class calles Socket (flex.net package). The requirement is that Flex will connect to a server serving binary data. It will then subscribe to data and receive the feed which it will interpret and display as a chart. I've never worked with Flex, my experience lies with Java, so everything is new to me. So I'm trying to quickly set something simple up. The Java server expects the following: DataInputStream in = ..... byte cmd = in.readByte(); int size = in.readByte(); byte[] buf = new byte[size]; in.readFully(buf); ... do some stuff and send binary data in something like out.writeByte(1); out.writeInt(10000); ... etc... Flex, needs to connect to a localhost:6666 do the handshake and read data. I got something like this: try { var socket:Socket = new Socket(); socket.connect('192.168.110.1', 9999); Alert.show('Connected.'); socket.writeByte(108); // 'l' socket.writeByte(115); // 's' socket.writeByte(4); socket.writeMultiByte('HHHH', 'ISO-8859-1'); socket.flush(); } catch (err:Error) { Alert.show(err.message + ": " + err.toString()); } The first thing is that Flex does a <policy-file-request/>. I've modified the server to respond with: <?xml version="1.0"?> <!DOCTYPE cross-domain-policy SYSTEM "/xml/dtds/cross-domain-policy.dtd"> <cross-domain-policy> <site-control permitted-cross-domain-policies="master-only"/> <allow-access-from domain="192.168.110.1" to-ports="*" /> </cross-domain-policy> After that - EOFException happens on the server and that's it. So the question is, am I approaching whole streaming data issue wrong when it comes to Flex? Am I sending the policy file wrong? Unfortunately, I can't seem to find a good solid example of how to do it. It seems to me that Flex can do binary Client-Server application, but I personally lack some basic knowledge when doing it. I'm using Flex 3.5 in IntelliJ IDEA IDE. Any help is appreciated. Thank you!

  Read the article

• Gigabyte GA-970A-UD3 mobo won't boot from USB flash drive

  - by user38586

  I am trying to boot BAMT a Debian flavor via USB on a brand new Gigabyte GA-970A-UD3 motherboard. I tried various flash drive and various OS. I never had this problem with ASUS and MSI. The problem is from Gigabyte hardware. I found that my BIOS is very strict about MBR compatibility. Now I can boot in DOS mode. The flash drive need to be formated as a Win98 Startup disk using HP USB disk storage format tool. Unetbootin menu is booting from USB but won't install BAMT. If I use Windows or Linux diskimager the working MBR is deleted. I tried converting BAMT .img to .iso and it is not booting with Unetbootin. Is it possible to boot BAMT(Debian Linux) from a Win98 DOS command prompt? Maybe there is a way to burn the image and keep the working MBR? If the working MBR is deleted, the flash drive is not recognized at all by the BIOS. This is the info I found that got me booting for the first time in DOS: GB's BIOS will only boot USBs formatted to FAT-32, conforming to normal MBR bootloader. I've seen this before, and surmised that the 'stick-maker' was formatting in ReiserFile, or one of the EXT 'flavors', but no one ever followed up to confirm or deny... Also, if it's putting the bootloader into its own partition - won't work! In the BIOS, on the "Integrated Peripherals" page, the "USB Storage Function" item must be enabled (which should be the default) to allow USB booting... I've put a little work into a 'GB USB booting tutorial', and frankly, I'd just go ahead and finish it up for you, but I really don't want to reboot the several times it will take me to 'firm up' procedural details, and take the BIOS/boot pictures for the post - just noticed VAIL finally went 'public beta', so will be downloading for likely twenty-six hours or so There's likely enough there to test a 'raw DOS boot', just to see if your hardware (especially the USB stick itself) will do it... Some post later: Fixed. Here is a brief summary. Since my ubuntu live usb sticks (2gb kingston and 8gb sandisk sd/usb reader - fat32, created in ubuntu 10.04) would not boot this board even though they would boot my ga-ep45-ud3p, I decided to try bilbat's suggestion with the HP usb boot program. I created the win98 boot disk on the kingston 2gb stick without reformatting. It booted right up. Next, I used windows version of unetbootin to write the ubuntu live cd to the kingston disk. This fired right up and completed the install. Everything seems to be in good order now. Unfortunately I can boot in DOS mode but can't boot BAMT.

  Read the article

• How Can I create different selectors for accepting new connection in java NIO

  - by Deepak

  I want to write java tcp socket programming using java NIO. Its working fine. But I am using the same selector for accepting reading from and writing to the clients. How Can I create different selectors for accepting new connection in java NIO, reading and writing. Is there any online help. Actually when I am busy in reading or writing my selector uses more iterator. So If more number of clients are connected then performance of accepting new coneection became slow. But I donot want the accepting clients to be slow // Create a selector and register two socket channels Selector selector = null; try { // Create the selector selector = Selector.open(); // Create two non-blocking sockets. This method is implemented in // e173 Creating a Non-Blocking Socket. SocketChannel sChannel1 = createSocketChannel("hostname.com", 80); SocketChannel sChannel2 = createSocketChannel("hostname.com", 80); // Register the channel with selector, listening for all events sChannel1.register(selector, sChannel1.validOps()); sChannel2.register(selector, sChannel1.validOps()); } catch (IOException e) { } // Wait for events while (true) { try { // Wait for an event selector.select(); } catch (IOException e) { // Handle error with selector break; } // Get list of selection keys with pending events Iterator it = selector.selectedKeys().iterator(); // Process each key at a time while (it.hasNext()) { // Get the selection key SelectionKey selKey = (SelectionKey)it.next(); // Remove it from the list to indicate that it is being processed it.remove(); try { processSelectionKey(selKey); } catch (IOException e) { // Handle error with channel and unregister selKey.cancel(); } } } public void processSelectionKey(SelectionKey selKey) throws IOException { // Since the ready operations are cumulative, // need to check readiness for each operation if (selKey.isValid() && selKey.isConnectable()) { // Get channel with connection request SocketChannel sChannel = (SocketChannel)selKey.channel(); boolean success = sChannel.finishConnect(); if (!success) { // An error occurred; handle it // Unregister the channel with this selector selKey.cancel(); } } if (selKey.isValid() && selKey.isReadable()) { // Get channel with bytes to read SocketChannel sChannel = (SocketChannel)selKey.channel(); // See e174 Reading from a SocketChannel } if (selKey.isValid() && selKey.isWritable()) { // Get channel that's ready for more bytes SocketChannel sChannel = (SocketChannel)selKey.channel(); } } Thanks Deepak

  Read the article

• Restore single users Exchange 2003 mailbox from backup

  - by Campo

  I take weekly backups of exchange in full. I also take complete weekly backups of the entire server. It is a Server 2003 R2 with AD and Exchange 2003 all on one box. One users inbox has disappeared. She has 19000+ junk items now. It is possible the inbox got mixed into the junk. Regardless it is such a huge mess she is not going to go through all of that.... I want to restore he mailbox from the backup. I followed this MS KB http://support.microsoft.com/kb/823176 I had to use Method 3. I have a VM of Server 2003 R2 with exchange but I am having failures on the restore from NT backup. The backup log just states to check the application log.... Application log points to backup log... Only info Is failed to restore Only thing different is the computer name... The only error I can find is in the Application log. Information Store Database not found All others just say that the backup failed. Any assistance is greatly appreciated. UPDATE I have successfully proven I can restore the DB into a recovery storage group in my VM Unfortunately due to the actual account being on a different store I am unable to do the recovery... Error is The attempt to log on to the Microsoft Exchange Server computer has failed. The MAPI provider failed. Microsoft Exchange Server Information Store ID no: 8004011d-0512-00000000 Two questions QUESTION 1 Should I repeat my steps on the production exchange server in the recover storage group? then merge into her original account? I am just concerned with doing recovery like that on the live server.... QUESTION 2 Is there any way I can extract her .PST from my recovery VM and then import into her outlook? On the Recovery VM: I restored the raw DB from my full backup repaired it with ESEUTIL then mounted in the recovery store. Was thinking I could just repeat and mount in the main store on the VM? Thanks for the suggestions.

  Read the article

• iptables blocking ssh communication

  - by Michal Sapsa

  I'm using this script for iptables: #!/bin/sh echo "1" > /proc/sys/net/ipv4/ip_forward iptables -F iptables -X iptables -F -t nat iptables -X -t nat iptables -F -t filter iptables -X -t filter iptables -t filter -P FORWARD DROP iptables -t filter -A FORWARD -s 192.168.0.0/255.255.0.0 -d 0/0 -j ACCEPT iptables -t filter -A FORWARD -s 0/0 -d 192.168.0.0/255.255.0.0 -j ACCEPT iptables -t nat -A POSTROUTING -s 10.8.0.1/255.255.255.0 -j MASQUERADE iptables -A FORWARD -s 10.8.0.1/255.255.255.0 -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0 -j MASQUERADE iptables -I FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu iptables -t nat -A PREROUTING -i eth1 -p udp --dport 16161 -j DNAT --to 192.168.0.251:16161 iptables -t nat -A PREROUTING -i eth1 -p udp --sport 16161 -j DNAT --to 192.168.0.251:16161 #openvpn iptables -I INPUT -p tcp --dport 1194 -j ACCEPT iptables -I INPUT -p udp --dport 1194 -j ACCEPT I end up with some iptables rules that should work but don't work - probably because of me. # Generated by iptables-save v1.4.12 on Mon May 26 13:15:43 2014 *raw :PREROUTING ACCEPT [1657523:1357257330] :OUTPUT ACCEPT [36804:34834370] -A PREROUTING -p icmp -j TRACE -A PREROUTING -p tcp -j TRACE -A OUTPUT -p icmp -j TRACE -A OUTPUT -p tcp -j TRACE COMMIT # Completed on Mon May 26 13:15:43 2014 # Generated by iptables-save v1.4.12 on Mon May 26 13:15:43 2014 *nat :PREROUTING ACCEPT [5033:345623] :INPUT ACCEPT [154:34662] :OUTPUT ACCEPT [6:1968] :POSTROUTING ACCEPT [2:120] -A PREROUTING -i eth0 -p tcp -m tcp --dport 16161 -j DNAT --to-destination 192.168.0.251:22 -A PREROUTING -i eth1 -p tcp -m tcp --dport 16161 -j DNAT --to-destination 192.168.0.251:22 -A POSTROUTING -s 10.8.0.0/24 -j MASQUERADE -A POSTROUTING -s 192.168.0.0/24 -j MASQUERADE COMMIT # Completed on Mon May 26 13:15:44 2014 # Generated by iptables-save v1.4.12 on Mon May 26 13:15:44 2014 *filter :INPUT ACCEPT [548:69692] :FORWARD DROP [8:384] :OUTPUT ACCEPT [2120:1097479] -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -p tcp -m tcp --dport 1194 -j ACCEPT -A FORWARD -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu -A FORWARD -s 192.168.0.0/16 -j ACCEPT -A FORWARD -d 192.168.0.0/16 -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -i eth0 -o eth1 -p tcp -m tcp --dport 22 -j ACCEPT -A FORWARD -i eth1 -o eth0 -p tcp -m tcp --dport 22 -j ACCEPT COMMIT TRACE at PREROUTEING AND OUTPUT are only for debuging this thing. When I ssh at public ip with port 16161 I don't get any message, only TimeOut so it looks like I don't get communication back to remote server. ETH0 is the world, ETH1 is LAN Any IPTABLES Masters willing to give a hand ? iptables -vL Chain INPUT (policy ACCEPT 20548 packets, 3198K bytes) pkts bytes target prot opt in out source destination 38822 7014K ACCEPT udp -- any any anywhere anywhere udp dpt:openvpn 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:openvpn Chain FORWARD (policy DROP 1129 packets, 64390 bytes) pkts bytes target prot opt in out source destination 214K 11M TCPMSS tcp -- any any anywhere anywhere tcpflags: SYN,RST/SYN TCPMSS clamp to PMTU 4565K 1090M ACCEPT all -- any any 192.168.0.0/16 anywhere 5916K 7315M ACCEPT all -- any any anywhere 192.168.0.0/16 0 0 ACCEPT all -- any any 10.8.0.0/24 anywhere 0 0 ACCEPT tcp -- any any anywhere 192.168.0.251 tcp dpt:16161 Chain OUTPUT (policy ACCEPT 59462 packets, 19M bytes) pkts bytes target prot opt in out source destination

  Read the article

• Vagrant-aws not provisioning

  - by SuperCabbage

  I'm trying to spin up and provision an EC2 instance with Vagrant, it successfully creates the instance up and I can then use vagrant ssh to SSH into the it but Puppet doesn't seem to carry out any provisioning. Upon running vagrant up --provider=aws --provision I get the following output Bringing machine 'default' up with 'aws' provider... WARNING: Nokogiri was built against LibXML version 2.8.0, but has dynamically loaded 2.9.1 [default] Warning! The AWS provider doesn't support any of the Vagrant high-level network configurations (`config.vm.network`). They will be silently ignored. [default] Launching an instance with the following settings... [default] -- Type: m1.small [default] -- AMI: ami-a73264ce [default] -- Region: us-east-1 [default] -- Keypair: banderton [default] -- Block Device Mapping: [] [default] -- Terminate On Shutdown: false [default] Waiting for SSH to become available... [default] Machine is booted and ready for use! [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/ => /vagrant [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/manifests/ => /tmp/vagrant-puppet/manifests [default] Rsyncing folder: /Users/benanderton/development/projects/my-project/aws/modules/ => /tmp/vagrant-puppet/modules-0 [default] Running provisioner: puppet... An error occurred while executing multiple actions in parallel. Any errors that occurred are shown below. An error occurred while executing the action on the 'default' machine. Please handle this error then try again: No error message I can then SSH into the instance by using vagrant ssh but none of my provisioning has taken place, so I'm assuming that errors have occured but I'm not being given any useful information relating to them. My Vagrantfile is as following; Vagrant.configure("2") do |config| config.vm.box = "ubuntu_aws" config.vm.box_url = "https://github.com/mitchellh/vagrant-aws/raw/master/dummy.box" config.vm.provider :aws do |aws, override| aws.access_key_id = "REDACTED" aws.secret_access_key = "REDACTED" aws.keypair_name = "banderton" override.ssh.private_key_path = "~/.ssh/banderton.pem" override.ssh.username = "ubuntu" aws.ami = "ami-a73264ce" end config.vm.provision :puppet do |puppet| puppet.manifests_path = "manifests" puppet.module_path = "modules" puppet.options = ['--verbose'] end end My Puppet manifest is as following; package { [ 'build-essential', 'vim', 'curl', 'git-core', 'nano', 'freetds-bin' ]: ensure => 'installed', } None of the packages are installed.

  Read the article

• Revolutionary brand powder packing machine price from affecting marketplace boom and put on uniform in addition to a lengthy service life

  - by user74606

  In mining in stone crushing, our machinery company's encounter becomes much more apparent. As a consequence of production capacity in between 600~800t/h of mining stone crusher, stone is mine Mobile Cone Crushing Plant Price 25~40 times, effectively solved the initially mining stone crusher operation because of low yield prices, no upkeep problems. Full chunk of mining stone crusher. Maximum particle size for crushing 1000x1200mm, an effective answer for the original side is mine stone provide, storing significant chunks of stone can not use complications in mines. Completed goods granularity is modest, only 2~15mm, an effective option for the original mine stone size, generally blocking chute production was an issue even the grinding machine. Two types of material mixed great uniformity, desulfurization of mining stone by adding weight considerably. Present quantity added is often reached 60%, effectively minimizing the cost of raw supplies. Electrical energy consumption has fallen. Dropped 1~2KWh/t tons of mining stone electrical energy consumption, annual electricity savings of one hundred,000 yuan. Efficient labor intensity of workers and also the atmosphere. Due to mine stone powder packing machine price a high degree of automation, with out human make contact with supplies, workers working circumstances enhanced significantly. Positive aspects, and along with mine for stone crushing, CS series cone Crusher has the following efficiency traits. CS series cone Crusher Chamber is divided into 3 unique designs, the user is usually chosen in accordance with the scenario on site crushing efficiency is high, uniform item size, grain shape, rolling mortar wall friction and put on uniform in addition to a extended service life of crushing cavity-. CS series cone Crusher utilizes a one of a kind dust-proof seal, sealing dependable, properly extend the service life of the lubricant replacement cycle and parts. CS series Sprial Sand washer price manufacture of important components to choose unique materials. Each and every stroke left rolling mortar wall of broken cone distances, by permitting a lot more products into the crushing cavity, as well as the formation of big discharge volume, speed of supplies by way of the crushing Chamber. This machine makes use of the principle of crushing cavity, also as unique laminated crushing, particle fragmentation, so that the completed product drastically improved the proportions of a cube, needle-shaped stones to lower particle levels extra evenly.

  Read the article

• server|configuration problem, a php script just die with no error log & no reason

  - by Roberto

  Hi (first of all, thanks for your attention & sorry for my bad english hahaha also this is not a programming error, or thats what I think, I think this is an error in some configuration of the server or something else but I dont know what) I have a php script (is running like a process of linux, its not running on the web browser) that send SMS via SMPP on the port 2055 (using sockets in php) & then inserts like 10,000 rows into a dababase on MySQL, the script gets the data from a XML file; firts it was running in a shared server (Hostgator is our hosting provider) & at the begining it worked fine, with no trouble, but 5 months later an error appear, the process just die with no reason, the script only sent & inserted 700 rows in the table of the database & the process didnt show any warning or error, nothing appears in the error logs, & I didnt make any change in the script Hostgator never helped us hahaha so we decided to move the script from the shared server to a dedicated server; I thought it was a memory problem or something like that, but when we move the script to the dedicated server the problem just get worse, the script die when has just sent & inserted 40 to 50 rows to the database the information about this error: the shared server is on Red Hat 4.1.2-46 & the dedicated server is on CentOS 5.4 I have commented the line that sends the SMS, & the problem remains in the shared server, at the begining the script was fine, but then the script started to die when has just inserted 700 aprox. in the database, & now the script is dying when has inserted 2500 rows, its better but we didnt change anything in the dedicated server, the script dies when has just inserted like 40 row in the table the script, before it dies, change to a zombie process & we dont know why the usage of memory appears to be 0.3%, and of the cpu appears to be 0.7% to 1% I have changed the max memory limit of php to 128Mb, and even to -1 (so php wont have any limit) but the problem remains we have the limit of 50 connections of mysql at the same time, so I think this is not the problem Im using mysqli to connect from php to mysql Hostgator report that they haven't made any change or update in the servers what could be the problem?? what should I do??? what should I search??? is something in the logic Im missing?? what steps do I have to follow when managing & searching problems of process on Linux??? thank you very much, I think this is not a programming problem, but you have more experience than me, you can tell me thanks!!! bye!!! :)

  Read the article

• Single console in eclipse for both Server and Client

  - by rits

  I am building a client server application using Java Sockets (in Windows XP). For that I need different consoles for both Client and Server(for Input and Output operations). But in eclipse both share a single console. Is there any plugin or some sort of cheat through which I can do this. After googling I got this, http://dev.eclipse.org/newslists/news.eclipse.newcomer/msg17138.html But, this seems to be only for write operations, not read operations. Also, I tried the following to launch application manually, but even this is not working........ package mypack; import java.io.BufferedOutputStream; import java.io.File; import java.io.FileOutputStream; import java.io.IOException; import java.io.OutputStream; import java.io.PrintStream; public class MySystem { public static void changeStream(String mainFile) throws IOException{ File temp = new File(".") ; String parentPath = temp.getCanonicalPath() ; System.out.println(parentPath); //creation of batch file starts here try{ File f = new File(parentPath + "\\a.bat") ; System.out.println("Created : " + f.createNewFile()); //f.deleteOnExit() ; FileOutputStream fos = new FileOutputStream(f) ; String str = "java " + mainFile ; String batchCommand="@echo off\n"+str+"\npause\nexit"; char arr[] = batchCommand.toCharArray() ; System.out.println(str) ; for(int i = 0 ; i < arr.length ; i++){ fos.write(arr[i]) ; } fos.close() ; } catch(Exception e){ } //creation of batch file ends here //execution of batch file starts here try{ Runtime r = Runtime.getRuntime() ; System.out.println(parentPath + "\\a.bat") ; Process p = r.exec(new String[]{"cmd","/k","start a.bat"},null,new File(parentPath)) ; OutputStream os = (OutputStream)p.getOutputStream() ; System.setOut( new PrintStream(os) ) ; System.out.println("Hello"); } catch(Exception e){ e.printStackTrace(); } //execution of batch file ends here } public static void main(String[] args) throws IOException { MySystem.changeStream("MySystem") ; } }

  Read the article

• Netcat file transfer problem

  - by thepurplepixel

  I have two custom scripts I just wrote to facilitate transferring files between my VPS and my home server. They are both written in bash (short & sweet): To send: #!/bin/bash SENDFILE=$1 PORT=$2 HOST='<my house>' HOSTIP=`host $HOST | grep "has address" | cut --delimiter=" " -f 4` echo Transferring file \"$SENDFILE\" to $HOST \($HOSTIP\). tar -c "$SENDFILE" | pv -c -N tar -i 0.5 | lzma -z -c -6 | pv -c -N lzma -i 0.5 | nc -q 1 $HOSTIP $PORT echo Done. To receive: #!/bin/bash SERVER='<myserver>' SERVERIP=`host $SERVER | grep "has address" | cut --delimiter=" " -f 4` PORT=$1 echo Receiving file from $SERVER \($SERVERIP\) on port $PORT. nc -l $PORT | pv -c -N netcat -i 0.5 | lzma -d -c | pv -c -N lzma -i 0.5 | tar -xf - echo Done. The problem is that, for a very quick second, I see something flash along the lines of "Connection Refused" (before pv overwrites it), and no file is ever transferred. The port is forwarded through my router, and nmap confirms it: ~$ sudo nmap -sU -PN -p55515 -v <my house> Starting Nmap 5.00 ( http://nmap.org ) at 2010-04-21 18:10 EDT NSE: Loaded 0 scripts for scanning. Initiating Parallel DNS resolution of 1 host. at 18:10 Completed Parallel DNS resolution of 1 host. at 18:10, 0.00s elapsed Initiating UDP Scan at 18:10 Scanning 74.13.25.94 [1 port] Completed UDP Scan at 18:10, 2.02s elapsed (1 total ports) Host 74.13.25.94 is up. Interesting ports on 74.13.25.94: PORT STATE SERVICE 55515/udp open|filtered unknown Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 2.08 seconds Raw packets sent: 2 (56B) | Rcvd: 5 (260B) Also, running netcat normally doesn't work either: squircle@summit:~$ netcat <my house> 55515 <my house> [<my IP>] 55515 (?) : Connection refused Both boxes are Ubuntu Karmic (9.10). The receiver has no firewall, and outbound traffic on that port is allowed on the sender. I have no idea what to troubleshoot next. Any ideas? P.S.: Feel free to move this to SO/SF if you feel it would fit better there.

  Read the article

• Running Network Application on port Server side give me error how can i solve it?

  - by Phsika

  if i run Server App. Exception occurs: on Dinle.Start() System.Net.SocketException - Only one usage of each socket address (protocol/network address/port) is normally permitted How can i solve this error? Server.cs using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.IO; using System.Net; using System.Net.Sockets; using System.Threading; namespace Server { public partial class Server : Form { Thread kanal; public Server() { InitializeComponent(); try { kanal = new Thread(new ThreadStart(Dinle)); kanal.Start(); kanal.Priority = ThreadPriority.Normal; this.Text = "Kanla Çalisti"; } catch (Exception ex) { this.Text = "kanal çalismadi"; MessageBox.Show("hata:" + ex.ToString()); kanal.Abort(); throw; } } private void Server_Load(object sender, EventArgs e) { Dinle(); } private void btn_Listen_Click(object sender, EventArgs e) { Dinle(); } void Dinle() { // IPAddress localAddr = IPAddress.Parse("localhost"); // TcpListener server = new TcpListener(port); // server = new TcpListener(localAddr, port); //TcpListener Dinle = new TcpListener(localAddr,51124); TcpListener Dinle = new TcpListener(51124); try { while (true) { Dinle.Start(); Exception is occured. Socket Baglanti = Dinle.AcceptSocket(); if (!Baglanti.Connected) { MessageBox.Show("Baglanti Yok"); } else { TcpClient tcpClient = Dinle.AcceptTcpClient(); if (tcpClient.ReceiveBufferSize 0) { byte[] Dizi = new byte[250000]; Baglanti.Receive(Dizi, Dizi.Length, 0); string Yol; saveFileDialog1.Title = "Dosyayi kaydet"; saveFileDialog1.ShowDialog(); Yol = saveFileDialog1.FileName; FileStream Dosya = new FileStream(Yol, FileMode.Create); Dosya.Write(Dizi, 0, Dizi.Length - 20); Dosya.Close(); listBox1.Items.Add("dosya indirildi"); listBox1.Items.Add("Dosya Boyutu=" + Dizi.Length.ToString()); listBox1.Items.Add("Indirilme Tarihi=" + DateTime.Now); listBox1.Items.Add("--------------------------------"); } } } } catch (Exception ex) { MessageBox.Show("hata:" + ex.ToString()); } } } }

  Read the article

• iptables management tools for large scale environment

  - by womble

  The environment I'm operating in is a large-scale web hosting operation (several hundred servers under management, almost-all-public addressing, etc -- so anything that talks about managing ADSL links is unlikely to work well), and we're looking for something that will be comfortable managing both the core ruleset (around 12,000 entries in iptables at current count) plus the host-based rulesets we manage for customers. Our core router ruleset changes a few times a day, and the host-based rulesets would change maybe 50 times a month (across all the servers, so maybe one change per five servers per month). We're currently using filtergen (which is balls in general, and super-balls at our scale of operation), and I've used shorewall in the past at other jobs (which would be preferable to filtergen, but I figure there's got to be something out there that's better than that). The "musts" we've come up with for any replacement system are: Must generate a ruleset fairly quickly (a filtergen run on our ruleset takes 15-20 minutes; this is just insane) -- this is related to the next point: Must generate an iptables-restore style file and load that in one hit, not call iptables for every rule insert Must not take down the firewall for an extended period while the ruleset reloads (again, this is a consequence of the above point) Must support IPv6 (we aren't deploying anything new that isn't IPv6 compatible) Must be DFSG-free Must use plain-text configuration files (as we run everything through revision control, and using standard Unix text-manipulation tools are our SOP) Must support both RedHat and Debian (packaged preferred, but at the very least mustn't be overtly hostile to either distro's standards) Must support the ability to run arbitrary iptables commands to support features that aren't part of the system's "native language" Anything that doesn't meet all these criteria will not be considered. The following are our "nice to haves": Should support config file "fragments" (that is, you can drop a pile of files in a directory and say to the firewall "include everything in this directory in the ruleset"; we use configuration management extensively and would like to use this feature to provide service-specific rules automatically) Should support raw tables Should allow you to specify particular ICMP in both incoming packets and REJECT rules Should gracefully support hostnames that resolve to more than one IP address (we've been caught by this one a few times with filtergen; it's a rather royal pain in the butt) The more optional/weird iptables features that the tool supports (either natively or via existing or easily-writable plugins) the better. We use strange features of iptables now and then, and the more of those that "just work", the better for everyone.

  Read the article

• How to initiate chatting between two clients and two clients only, using applets and servlets?

  - by mithun1538

  Hello everyone, I first need to apologize for my earlier questions. (You can check my profile for them)They seemed to ask more questions than give answers. Hence, I am laying down the actual question that started all them absurd questions. I am trying to design a chat applet. Till now, I have coded the applet, servlet and communication between the applet and the servlet. The code in the servlet side is such that I was able to establish chatting between clients using the applets, but the code was more like a broadcast all feature, i.e. all clients would be chatting with each other. That was my first objective when I started designing the chat applet. The second step is chatting between only two specific users, much like any other chat application we have. So this was my idea for it: I create an instance of the servlet that has the 'broadcast-all' code. I then pass the address of this instance to the respective clients. 2 client applets use the address to then chat. Technically the code is 'broadcast-all', but since only 2 clients are connected to it, it gives the chatting between two clients feature. Thus, groups of 2 clients have different instances of the same servlet, and each instance handles chatting between two clients at a max. However, as predicted, the idea didn't materialize! I tried to create an instance of the servlet but the only solution for that was using sessions on the servlet side, and I don't know how to use this session for later communications. I then tried to modify my broadcast-all code. In that code, I was using classes that implemented Observer and Observable interfaces. So the next idea that I got was: Create a new object of the Observable class(say class_1). This object be common to 2 clients. 2 clients that wish to chat will use same object of the class_1. 2 other clients will use a different object of class_1. But the problem here lies with the class that implements the Observer interface(say class_2). Since this has observers monitoring the same type of class, namely class_1, how do I establish an observer monitoring one object of class_1 and another observer monitoring another object of the same class class_1 (Because notifyObservers() would notify all the observers and I can't assign a particular observer to a particular object)? I first decided to ask individual problems, like how to create instances of servlets, using objects of observable and observer and so on in stackoverflow... but I got confused even more. Can anyone give me an idea how to establish chatting between two clients only?(I am using Http and not sockets or RMI). Regards, Mithun. P.S. Thanks to all who replied to my previous (absurd) queries. I should have stated the purpose earlier so that you guys could help me better.

  Read the article

• sending email in .NET

  - by VP

  I am getting the following error when I try to send an email in my C# program. I am using Visual Studio 2008 on windows 7. I would paste my code first and then the error: using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.IO; using System.Net; using System.Net.Mail; using System.Net.Mime; using System.Net.Sockets; using System.Web; class email_log_files { private string login_username = "my_gmail_id"; private string login_password = "my_gmail_password"; public void send_email() { string src_address = "[email protected]"; string dest_address = "[email protected]"; try { MailMessage email_msg = new MailMessage(); SmtpClient email_client = new SmtpClient(); email_msg.From = new MailAddress(src_address); email_msg.Sender = new MailAddress(src_address); email_msg.ReplyTo = new MailAddress(src_address); email_msg.To.Add(dest_address); email_msg.Subject = "Test"; email_msg.Body = "Body of the message"; NetworkCredential credentials = new NetworkCredential(login_username, login_password); email_client.Credentials = credentials; email_client.Host = "smtp.gmail.com"; email_client.Port = 465; email_client.EnableSsl = true; email_client.Send(email_msg); Console.WriteLine("Message Sent Successfully!!"); Console.ReadLine(); } catch (Exception ex) { Console.WriteLine(ex.Message.ToString()); Console.WriteLine(ex.InnerException); Console.WriteLine(ex.Source); Console.WriteLine(ex.Data); Console.ReadLine(); } } } And the error message is as follows: The operation has timed out. System System.Collections.ListDictionaryInternal Why is it always timing out? I am sure that I have the correct smtp server address and port number for gmail as I have configured my outlook with the same. Any help or ideas?

  Read the article

• What are incentives (if any) to use WinRT instead of .Net?

  - by Ark-kun

  Let's compare WinRT with .Net .Net .Net is the 13+ years evolution of COM. Three main parts of .Net are execution environment, standard libraries and supported languages. CLR is the native-code execution environment based on COM .Net Framework has a big set of standard libraries (implemented using managed and native code) that can be used from all .Net languages. There are .Net classes that allow using OS APIs. WPF or Silverlight provide a XAML-based UI framework .Net can be used with C++, C#, Javascript, Python, Ruby, VB, LISP, Scheme and many other languages. C++/.Net is a variation of the C++ language that allows interaction with .Net objects. .Net supports inheritance, generics, operator and method overloading and many other features. .Net allows creating apps that run on Windows (XP, 7, 8 Pro (Desktop and Metro), RT, CE, etc), Mac OS, Linux (+ other *nix); iOS, Android, Windows Phone (7, 8); Internet Explorer, Chrome, Firefox; XBox 360, Playstation Suite; raw microprocessors. There is support for creating games (2D/3D) using any managed language or C++. Created by Developer Division WinRT WinRT is based on COM. Three main parts of WinRT are execution environment, standard libraries and supported languages. WinRT has a native-code execution environment based on COM WinRT has a set of standard libraries that more or less can be used from WinRT languages. There are WinRT classes that allow using OS APIs. Unnamed Silverlight clone provides a XAML-based UI framework WinRT can be used with C++, C#, Javascript, VB. C++/CX is a variation of the C++ language that allows interaction with WinRT objects. Custom WinRT components don't support inheritance (classes must be sealed), generics, operator overloading and many other features. WinRT allows creating apps that run on Windows 8 Pro and RT (Metro only); Windows Phone 8 (limited). There is support for creating games (2D/3D) using C++ only. Ordered by Windows Team I think that all the aspects except the last ones are very important for developers. On the other hand it seems that the most important aspect for Microsoft is the last one. So, given the above comparison of conceptually identical technologies, what are incentives (if any) to use WinRT instead of .Net?

  Read the article

• Registry Problem

  - by Dominik

  I made a launcher for my game server. (World of Warcraft) I want to get the installpath of the game, browsed by the user. I'm using this code to browse, and get the installpath, then set some other strings from the installpath string, then just strore in my registry key. using System; using System.Drawing; using System.Reflection; using System.Collections; using System.ComponentModel; using System.Windows.Forms; using System.Data; using Microsoft.Win32; using System.IO; using System.Net.NetworkInformation; using System.Diagnostics; using System.Runtime; using System.Runtime.InteropServices; using System.Security; using System.Security.Cryptography; using System.Text; using System.Net; using System.Linq; using System.Net.Sockets; using System.Collections.Generic; using System.Threading; namespace WindowsFormsApplication1 { public partial class Form1 : Form { public Form1() { InitializeComponent(); } string InstallPath, WoWExe, PatchPath; private void Form1_Load(object sender, EventArgs e) { RegistryKey LocalMachineKey_Existence; MessageBox.Show("Browse your install location.", "Select Wow.exe"); OpenFileDialog BrowseInstallPath = new OpenFileDialog(); BrowseInstallPath.Filter = "wow.exe|*.exe"; if (BrowseInstallPath.ShowDialog() == DialogResult.OK) { InstallPath = System.IO.Path.GetDirectoryName(BrowseInstallPath.FileName); WoWExe = InstallPath + "\\wow.exe"; PatchPath = InstallPath + "\\Data\\"; LocalMachineKey_Existence = Registry.LocalMachine.CreateSubKey(@"SOFTWARE\ExistenceWoW"); LocalMachineKey_Existence.SetValue("InstallPathLocation", InstallPath); LocalMachineKey_Existence.SetValue("PatchPathLocation", PatchPath); LocalMachineKey_Existence.SetValue("WoWExeLocation", WoWExe); } } } } The problem is: On some computer, it doesnt stores like it should be. For example, your wow.exe is in C:\ASD\wow.exe, your select it with the browse windows, then the program should store it in the Existence registry key as C:\ASD\Data\ but it stores like this: C:\ASDData , so it forgots a backslash :S Look at this picture: http://img21.imageshack.us/img21/2829/regedita.jpg My program works cool on my PC, and on my friends pc, but on some pc this "bug" comes out :S I have windows 7, with .NEt 3.5 Please help me.

  Read the article

• Any way to recover ext4 filesystems from a deleted LVM logical volume?

  - by Vegar Nilsen

  The other day I had a proper brain fart moment while expanding a disk on a Linux guest under Vmware. I stretched the Vmware disk file to the desired size and then I did what I usually do on Linux guests without LVM: I deleted the LVM partition and recreated it, starting in the same spot as the old one, but extended to the new size of the disk. (Which will be followed by fsck and resize2fs.) And then I realized that LVM doesn't behave the same way as ext2/3/4 on raw partitions... After restoring the Linux guest from the most recent backup (taken only five hours earlier, luckily) I'm now curious on how I could have recovered from the following scenario. It's after all virtually guaranteed that I'll be a dumb ass in the future as well. Virtual Linux guest with one disk, partitioned into one /boot (primary) partition (/dev/sda1) of 256MB, and the rest in a logical, extended partition (/dev/sda5). /dev/sda5 is then setup as a physical volume with pvcreate, and one volume group (vgroup00) created on top of it with the usual vgcreate command. vgroup00 is then split into two logical volumes root and swap, which are used for / and swap, logically. / is an ext4 file system. Since I had backups of the broken guest I was able to recreate the volume group with vgcfgrestore from the backup LVM setup found under /etc/lvm/backup, with the same UUID for the physical volume and all that. After running this I had two logical volumes with the same size as earlier, with 4GB free space where I had stretched the disk. However, when I tried to run "fsck /dev/mapper/vgroup00-root" it complained about a broken superblock. I tried to locate backup superblocks by running "mke2fs -n /dev/mapper/vgroup00-root" but none of those worked either. Then I tried to run TestDisk but when I asked it to find superblocks it only gave an error about not being able to open the file system due to a broken file system. So, with the default allocation policy for LVM2 in Ubuntu Server 10.04 64-bit, is it possible that the logical volumes are allocated from the end of the volume group? That would definitely explain why the restored logical volumes didn't contain the expected data. Could I have recovered by recreating /dev/sda5 with exactly the same size and disk position as earlier? Are there any other tools I could have used to find and recover the file system? (And clearly, the question is not whether or not I should have done this in a different way from the start, I know that. This is a question about what to do when shit has already hit the fan.)

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >