Search Results

Search found 3942 results on 158 pages for 'stick it to the man'.

Page 127/158 | < Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >

• SQLAuthority News – Live Virtual Classroom New Trend in Technology

  - by nupurdave

  This blog post is by Nupur Dave, who is housewife and works from home. Changing times and a super busy lifestyle have rendered most of us powerless when it comes to doing what we love to do. I feel that a man never ceases to learn and his sole aim is to seek knowledge, and keep growing. However, our tight schedules and packed calendars mean that we really have to struggle to take some time out and follow the path towards learning. Like all working professionals with a family to take care of, I hardly found time to pursue my interests. However, it was getting increasingly important for me to upgrade my skills, not only for my personal quest for knowledge but to also substantiate my professional standing. When I came to know about Koenig Live Virtual Classroom from friends, it piqued my interest. I felt like it was the answer to all my concerns. Without wasting a single minute, I contacted Koenig for a demo class. Here are some of the highlights of Koenig LVC which instantly struck a chord in me: Online Training – Koenig offers 1-on-1 Online Training with the instructor at the other end. Doesn’t matter where I am sitting, in my office or at home, I can connect to my trainer from anywhere. Flexible Timings – The most comfortable part is you get to choose the time that suits you best. Economical -  No need to travel a thousand miles, the experts are right here on your computer screen. So no extra cost of travel, lodging and meals. 24X7 Lab Access: This is again a great feature that proved to be very beneficial in gaining a practical understanding of the subject. Powered by a data center, this facility offers students much to look forward to. 300+ Full Time Certified Experts: Be assured that you are learning from the best people in the industry. Customized Courses: Course material and training delivery is completely customized to suit your specific requirements. Official Courseware: The instructor teaches from official courseware of the vendor, depending on which course you have applied for – be it Microsoft, Cisco, Oracle or any other certification. Take Exam from Anywhere: Post completion of your IT training, you can take your certification exam from anywhere. Again, no need to travel a thousand miles to earn certified status. No Pre-Recorded Sessions: For those who still need clarification, it will be a live online classroom with trainers instructing you in real time. So you won’t get any surprises of getting pre-recorded sessions in place of your live instructor. Koenig’s Live Virtual Classroom methodology greatly exceeded my expectations. The instructor was highly skilled and very professional. I had concerns about the quality of AV on the computer screen, and whether I’ll be able to understand each topic in detail. However, the quality of video and sound, and the learning methodology used was impeccable. If you’re also facing time crunch and other commitment issues which are getting in the way of your professional development, LVC is the best solution to learn and grow. To know more about Student Experiences and Feedback of Koenig LVC, you can view their Testimonials. Reference: Nupur Dave (http://blog.sqlauthority.com)Filed under: SQL Authority

  Read the article

• Calculating for leap year [migrated]

  - by Bradley Bauer

  I've written this program using Java in Eclipse. I was able to utilize a formula I found that I explained in the commented out section. Using the for loop I can iterate through each month of the year, which I feel good about in that code, it seems clean and smooth to me. Maybe I could give the variables full names to make everything more readable but I'm just using the formula in its basic essence :) Well my problem is it doesn't calculate correctly for years like 2008... Leap Years. I know that if (year % 400 == 0 || (year % 4 == 0 && year % 100 != 0)) then we have a leap year. Maybe if the year is a leap year I need to subtract a certain amount of days from a certain month. Any solutions, or some direction would be great thanks :) package exercises; public class E28 { /* * Display the first days of each month * Enter the year * Enter first day of the year * * h = (q + (26 * (m + 1)) / 10 + k + k/4 + j/4 + 5j) % 7 * * h is the day of the week (0: Saturday, 1: Sunday ......) * q is the day of the month * m is the month (3: March 4: April.... January and Feburary are 13 and 14) * j is the century (year / 100) * k is the year of the century (year %100) * */ public static void main(String[] args) { java.util.Scanner input = new java.util.Scanner(System.in); System.out.print("Enter the year: "); int year = input.nextInt(); int j = year / 100; // Find century for formula int k = year % 100; // Find year of century for formula // Loop iterates 12 times. Guess why. for (int i = 1, m = i; i <= 12; i++) { // Make m = i. So loop processes formula once for each month if (m == 1 || m == 2) m += 12; // Formula requires that Jan and Feb are represented as 13 and 14 else m = i; // if not jan or feb, then set m to i int h = (1 + (26 * (m + 1)) / 10 + k + k/4 + j/4 + 5 * j) % 7; // Formula created by a really smart man somewhere // I let the control variable i steer the direction of the formual's m value String day; if (h == 0) day = "Saturday"; else if (h == 1) day = "Sunday"; else if (h == 2) day = "Monday"; else if (h == 3) day = "Tuesday"; else if (h == 4) day = "Wednesday"; else if (h == 5) day = "Thursday"; else day = "Friday"; switch (m) { case 13: System.out.println("January 1, " + year + " is " + day); break; case 14: System.out.println("Feburary 1, " + year + " is " + day); break; case 3: System.out.println("March 1, " + year + " is " + day); break; case 4: System.out.println("April 1, " + year + " is " + day); break; case 5: System.out.println("May 1, " + year + " is " + day); break; case 6: System.out.println("June 1, " + year + " is " + day); break; case 7: System.out.println("July 1, " + year + " is " + day); break; case 8: System.out.println("August 1, " + year + " is " + day); break; case 9: System.out.println("September 1, " + year + " is " + day); break; case 10: System.out.println("October 1, " + year + " is " + day); break; case 11: System.out.println("November 1, " + year + " is " + day); break; case 12: System.out.println("December 1, " + year + " is " + day); break; } } } }

  Read the article

• Good DBAs Do Baselines

  - by Louis Davidson

  One morning, you wake up and feel funny. You can’t quite put your finger on it, but something isn’t quite right. What now? Unless you happen to be a hypochondriac, you likely drag yourself out of bed, get on with the day and gather more “evidence”. You check your symptoms over the next few days; do you feel the same, better, worse? If better, then great, it was some temporal issue, perhaps caused by an allergic reaction to some suspiciously spicy chicken. If the same or worse then you go to the doctor for some health advice, but armed with some data to share, and having ruled out certain possible causes that are fixed with a bit of rest and perhaps an antacid. Whether you realize it or not, in comparing how you feel one day to the next, you have taken baseline measurements. In much the same way, a DBA uses baselines to gauge the gauge health of their database servers. Of course, while SQL Server is very willing to share data regarding its health and activities, it has almost no idea of the difference between good and bad. Over time, experienced DBAs develop “mental” baselines with which they can gauge the health of their servers almost as easily as their own body. They accumulate knowledge of the daily, natural state of each part of their database system, and so know instinctively when one of their databases “feels funny”. Equally, they know when an “issue” is just a passing tremor. They see their SQL Server with all of its four CPU cores running close 100% and don’t panic anymore. Why? It’s 5PM and every day the same thing occurs when the end-of-day reports, which are very CPU intensive, are running. Equally, they know when they need to respond in earnest when it is the first time they have heard about an issue, even if it has been happening every day. Nevertheless, no DBA can retain mental baselines for every characteristic of their systems, so we need to collect physical baselines too. In my experience, surprisingly few DBAs do this very well. Part of the problem is that SQL Server provides a lot of instrumentation. If you look, you will find an almost overwhelming amount of data regarding user activity on your SQL Server instances, and use and abuse of the available CPU, I/O and memory. It seems like a huge task even to work out which data you need to collect, let alone start collecting it on a regular basis, managing its storage over time, and performing detailed comparative analysis. However, without baselines, though, it is very difficult to pinpoint what ails a server, just by looking at a single snapshot of the data, or to spot retrospectively what caused the problem by examining aggregated data for the server, collected over many months. It isn’t as hard as you think to get started. You’ve probably already established some troubleshooting queries of the type SELECT Value FROM SomeSystemTableOrView. Capturing a set of baseline values for such a query can be as easy as changing it as follows: INSERT into BaseLine.SomeSystemTable (value, captureTime) SELECT Value, SYSDATETIME() FROM SomeSystemTableOrView; Of course, there are monitoring tools that will collect and manage this baseline data for you, automatically, and allow you to perform comparison of metrics over different periods. However, to get yourself started and to prove to yourself (or perhaps the person who writes the checks for tools) the value of baselines, stick something similar to the above query into an agent job, running every hour or so, and you are on your way with no excuses! Then, the next time you investigate a slow server, and see x open transactions, y users logged in, and z rows added per hour in the Orders table, compare to your baselines and see immediately what, if anything, has changed!

  Read the article

• Getting errors when installing packages

  - by user1805184

  Which ever package I try and install I seem to get the following error installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Preconfiguring packages ... Preconfiguring packages ... Selecting previously unselected package libphonon4. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 286403 files and directories currently installed.) Unpacking libphonon4 (from .../libphonon4_4%3a4.7.0really4.6.0-0ubuntu1_amd64.deb) ... Selecting previously unselected package phonon-backend-gstreamer. Unpacking phonon-backend-gstreamer (from .../phonon-backend-gstreamer_4%3a4.7.0really4.6.2-0ubuntu0.1_amd64.deb) ... Selecting previously unselected package gstreamer0.10-ffmpeg. Unpacking gstreamer0.10-ffmpeg (from .../gstreamer0.10-ffmpeg_0.10.13-1_amd64.deb) ... Selecting previously unselected package phonon. Unpacking phonon (from .../phonon_4%3a4.7.0really4.6.0-0ubuntu1_amd64.deb) ... Selecting previously unselected package minitube. Unpacking minitube (from .../minitube_1.6-1_amd64.deb) ... Processing triggers for hicolor-icon-theme ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for man-db ... Setting up icaclient (12.1.0) ... dpkg: error processing icaclient (--configure): subprocess installed post-installation script returned error exit status 2 Setting up libphonon4 (4:4.7.0really4.6.0-0ubuntu1) ... No apport report written because MaxReports is reached already Setting up phonon-backend-gstreamer (4:4.7.0really4.6.2-0ubuntu0.1) ... Setting up gstreamer0.10-ffmpeg (0.10.13-1) ... Setting up phonon (4:4.7.0really4.6.0-0ubuntu1) ... Setting up minitube (1.6-1) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: icaclient Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up icaclient (12.1.0) ... dpkg: error processing icaclient (--configure): subprocess installed post-installation script returned error exit status 2 please help....

  Read the article

• Solaris 11.1: Encrypted Immutable Zones on (ZFS) Shared Storage

  - by darrenm

  Solaris 11 brought both ZFS encryption and the Immutable Zones feature and I've talked about the combination in the past.  Solaris 11.1 adds a fully supported method of storing zones in their own ZFS using shared storage so lets update things a little and put all three parts together. When using an iSCSI (or other supported shared storage target) for a Zone we can either let the Zones framework setup the ZFS pool or we can do it manually before hand and tell the Zones framework to use the one we made earlier.  To enable encryption we have to take the second path so that we can setup the pool with encryption before we start to install the zones on it. We start by configuring the zone and specifying an rootzpool resource: # zonecfg -z eizoss Use 'create' to begin configuring a new zone. zonecfg:eizoss> create create: Using system default template 'SYSdefault' zonecfg:eizoss> set zonepath=/zones/eizoss zonecfg:eizoss> set file-mac-profile=fixed-configuration zonecfg:eizoss> add rootzpool zonecfg:eizoss:rootzpool> add storage \ iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 zonecfg:eizoss:rootzpool> end zonecfg:eizoss> verify zonecfg:eizoss> commit zonecfg:eizoss> Now lets create the pool and specify encryption: # suriadm map \ iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 PROPERTY VALUE mapped-dev /dev/dsk/c10t600144F09ACAACD20000508E64A70001d0 # echo "zfscrypto" > /zones/p # zpool create -O encryption=on -O keysource=passphrase,file:///zones/p eizoss \ /dev/dsk/c10t600144F09ACAACD20000508E64A70001d0 # zpool export eizoss Note that the keysource example above is just for this example, realistically you should probably use an Oracle Key Manager or some other better keystorage, but that isn't the purpose of this example.  Note however that it does need to be one of file:// https:// pkcs11: and not prompt for the key location.  Also note that we exported the newly created pool.  The name we used here doesn't actually mater because it will get set properly on import anyway. So lets go ahead and do our install: zoneadm -z eizoss install -x force-zpool-import Configured zone storage resource(s) from: iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 Imported zone zpool: eizoss_rpool Progress being logged to /var/log/zones/zoneadm.20121029T115231Z.eizoss.install Image: Preparing at /zones/eizoss/root. AI Manifest: /tmp/manifest.xml.ujaq54 SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: eizoss Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/solaris/release/ Please review the licenses for the following packages post-install: consolidation/osnet/osnet-incorporation (automatically accepted, not displayed) Package licenses may be viewed using the command: pkg info --license <pkg_fmri> DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 187/187 33575/33575 227.0/227.0 384k/s PHASE ITEMS Installing new actions 47449/47449 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 929.606 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/eizoss/root/var/log/zones/zoneadm.20121029T115231Z.eizoss.install That was really all we had to do, when the install is done boot it up as normal. The zone administrator has no direct access to the ZFS wrapping keys used for the encrypted pool zone is stored on.  Due to how inheritance works in ZFS he can still create new encrypted datasets that use those wrapping keys (without them ever being inside a process in the zone) or he can create encrypted datasets inside the zone that use keys of his own choosing, the output below shows the two cases: rpool is inheriting the key material from the global zone (note we can see the value of the keysource property but we don't use it inside the zone nor does that path need to be (or is) accessible inside the zone). Whereas rpool/export/home/bob has set keysource locally. # zfs get encryption,keysource rpool rpool/export/home/bob NAME PROPERTY VALUE SOURCE rpool encryption on inherited from $globalzone rpool keysource passphrase,file:///zones/p inherited from $globalzone rpool/export/home/bob encryption on local rpool/export/home/bob keysource passphrase,prompt local  

  Read the article

• Java EE 7 Roadmap

  - by Linda DeMichiel

  The Java EE 6 Platform, released in December 2009, has seen great uptake from the community with its POJO-based programming model, lightweight Web Profile, and extension points. There are now 13 Java EE 6 compliant appserver implementations today! When we announced the Java EE 7 JSR back in early 2011, our plans were that we would release it by Q4 2012. This target date was slightly over three years after the release of Java EE 6, but at the same time it meant that we had less than two years to complete a fairly comprehensive agenda — to continue to invest in significant enhancements in simplification, usability, and functionality in updated versions of the JSRs that are currently part of the platform; to introduce new JSRs that reflect emerging needs in the community; and to add support for use in cloud environments. We have since announced a minor adjustment in our dates (to the spring of 2013) in order to accommodate the inclusion of JSRs of importance to the community, such as Web Sockets and JSON-P. At this point, however, we have to make a choice. Despite our best intentions, our progress has been slow on the cloud side of our agenda. Partially this has been due to a lack of maturity in the space for provisioning, multi-tenancy, elasticity, and the deployment of applications in the cloud. And partially it is due to our conservative approach in trying to get things "right" in view of limited industry experience in the cloud area when we started this work. Because of this, we believe that providing solid support for standardized PaaS-based programming and multi-tenancy would delay the release of Java EE 7 until the spring of 2014 — that is, two years from now and over a year behind schedule. In our opinion, that is way too long. We have therefore proposed to the Java EE 7 Expert Group that we adjust our course of action — namely, stick to our current target release dates, and defer the remaining aspects of our agenda for PaaS enablement and multi-tenancy support to Java EE 8. Of course, we continue to believe that Java EE is well-suited for use in the cloud, although such use might not be quite ready for full standardization. Even today, without Java EE 7, Java EE vendors such as Oracle, Red Hat, IBM, and CloudBees have begun to offer the ability to run Java EE applications in the cloud. Deferring the remaining cloud-oriented aspects of our agenda has several important advantages: It allows Java EE Platform vendors to gain more experience with their implementations in this area and thus helps us avoid risks entailed by trying to standardize prematurely in an emerging area. It means that the community won't need to wait longer for those features that are ready at the cost of those features that need more time. Because we have already laid some of the infrastructure for cloud support in Java EE 7, including resource definition metadata, improved security configuration, JPA schema generation, etc., it will allow us to expedite a Java EE 8 release. We therefore plan to target the Java EE 8 Platform release for the spring of 2015. This shift in the scope of Java EE 7 allows us to better retain our focus on enhancements in simplification and usability and to deliver on schedule those features that have been most requested by developers. These include the support for HTML 5 in the form of Web Sockets and JSON-P; the simplified JMS 2.0 APIs; improved Managed Bean alignment, including transactional interceptors; the JAX-RS 2.0 client API; support for method-level validation; a much more comprehensive expression language; and more. We feel strongly that this is the right thing to do, and we hope that you will support us in this proposed direction.

  Read the article

• Auto update not working

  - by Mifas

  When I get new updates, I can't install them. When I try to install I get the following error message. installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Preconfiguring packages ... Preconfiguring packages ... (Reading database ... (Reading database ... 5%% (Reading database ... 10%% (Reading database ... 15%% (Reading database ... 20%% (Reading database ... 25%% (Reading database ... 30%% (Reading database ... 35%% (Reading database ... 40%% (Reading database ... 45%% (Reading database ... 50%% (Reading database ... 55%% (Reading database ... 60%% (Reading database ... 65%% (Reading database ... 70%% (Reading database ... 75%% (Reading database ... 80%% (Reading database ... 85%% (Reading database ... 90%% (Reading database ... 95%% (Reading database ... 100%% (Reading database ... 191976 files and directories currently installed.) Preparing to replace resolvconf 1.63ubuntu11 (using .../resolvconf_1.63ubuntu14_all.deb) ... Unpacking replacement resolvconf ... Preparing to replace libutouch-geis1 2.2.9-0ubuntu2 (using .../libutouch-geis1_2.2.9-0ubuntu3_i386.deb) ... Unpacking replacement libutouch-geis1 ... Preparing to replace vino 3.4.1-0ubuntu1 (using .../vino_3.4.2-0ubuntu1_i386.deb) ... Unpacking replacement vino ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for man-db ... Processing triggers for gconf2 ... Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for gnome-menus ... Processing triggers for libglib2.0-0 ... Setting up oracle-java7-installer (7u3-0~eugenesan~precise4) ... Downloading... --2012-05-23 19:40:37-- http://download.oracle.com/otn-pub/java/jdk/7u3-b04/jdk-7u3-linux-i586.tar.gz Resolving download.oracle.com (download.oracle.com)... 223.224.12.144, 223.224.12.146 Connecting to download.oracle.com (download.oracle.com)|223.224.12.144|:80... connected. HTTP request sent, awaiting response... 302 Moved Temporarily Location: https://edelivery.oracle.com/otn-pub/java/jdk/7u3-b04/jdk-7u3-linux-i586.tar.gz [following] --2012-05-23 19:40:38-- https://edelivery.oracle.com/otn-pub/java/jdk/7u3-b04/jdk-7u3-linux-i586.tar.gz Resolving edelivery.oracle.com (edelivery.oracle.com)... 173.223.2.174 Connecting to edelivery.oracle.com (edelivery.oracle.com)|173.223.2.174|:443... connected. HTTP request sent, awaiting response... 302 Moved Temporarily Location: http://download.oracle.com/errors/download-fail-1505220.html [following] --2012-05-23 19:40:41-- http://download.oracle.com/errors/download-fail-1505220.html Connecting to download.oracle.com (download.oracle.com)|223.224.12.144|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 5307 (5.2K) [text/html] Saving to: `./jdk-7u3-linux-i586.tar.gz' 0K ..... 100%% 52.9K=0.1s 2012-05-23 19:40:41 (52.9 KB/s) - `./jdk-7u3-linux-i586.tar.gz' saved [5307/5307] Download done. sha256sum mismatch jdk-7u3-linux-i586.tar.gz Oracle JDK 7 is NOT installed. dpkg: error processing oracle-java7-installer (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Setting up resolvconf (1.63ubuntu14) ... Setting up libutouch-geis1 (2.2.9-0ubuntu3) ... Setting up vino (3.4.2-0ubuntu1) ... Processing triggers for resolvconf ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: oracle-java7-installer Error in function:

  Read the article

• Need help partitioning when reinstalling Ubuntu 14.04

  - by Chris M.

  I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• What Color is your Jetpack ?

  - by JoshReuben

  I’m a programmer, Im approaching 40, and I’m fairly decent at my job – I’ll keep doing what I’m doing for as long as they let me!   So what are your career options if you know how to code? A Programmer could be ..   An Algorithm developer Pros Interesting High barriers of entry, potential for startup competitive factor Cons Do you have the skill, qualifications? What are working conditions n this mystery niche ? micro-focus An Academic Pros Low pressure Job security – or is this an illusion ? Cons Low Pay Need a PhD A Software Architect Pros: strategic, rather than tactical Setting technology platform and high level vision You say how it should work, others have to figure out why its not working the way its supposed to ! broad view – you are paid to learn (how do you con people into paying for you to learn ??) Cons: Glorified developer – more often than not! competitive – everyone wants to do it ! loose touch with underlying tech in tough times, first guy to get the axe ! A Software Engineer Pros: interesting, always more to learn fun I can do it Fallback Cons: Nothing new under the sun – been there, done that Dealing with poor requirements, deadlines, other peoples code, overtime C#, XAML, Web - Low barriers of entry –> à race to the bottom A Team leader Pros: Setting code standards and proposing technology choices Cons: Glorified developer – more often than not! Inspecting other peoples code and debugging the problems they cannot fix Dealing with mugbies and prima donas Responsible for QA of others A Project Manager Pros No need for debugging other peoples code Cons Low barrier of entry High pressure Responsible for QA of others Loosing touch with technology A lot of bullshit meetings Have to be an asshole A Product Manager Pros No need for debugging other peoples code Learning new skillset of sales and marketing Cons Travel (I'm a family man) May need to know the bs details of an uninteresting product things I want to work with: AI, algorithms, Numerical Computing, Mathematica, C++ AMP – unfortunately, the work here is few & far between. VS & TFS Extensibility, DSLs (Workflow , Lightswitch), Code Generation – one day, code will write code ! Unity3D, WebGL – fun, fun, fun ! Modern Web – Knockout, SignalR, MVC, Node.Js ??? (tentative – I'll wait until things stabilize as this area is undergoing a pre-Cambrian explosion) Things I don’t want to work with: (but will if I'm asked to !) C# – same old, same old – not learning anything new here Old code – blech ! Environment with code & fix mentality , ad hoc requirements, excessive overtime Pc support, System administration – even after 20 years, people still ask you to do this sometimes ! debugging – my skills are just not there yet Oracle Old tech: VB 6, XSLT, WinForms, Net 3.51 or less Old style Web dev Information Systems: ASP.NET webforms, Reporting services / crystal reports, SQL Server CRUD with manual data layer, XAML MVVM – variations of the same concept, ad nauseaum. Low barriers of entry –> race to the bottom.  Metro – an elegant API coupled to a horrendous UX – I'll wait for market penetration viability before investing further in this.   Conclusion So if you are in a slump, take heart: Programming is a great career choice compared to every other job !

  Read the article

• Package management system corrupted. Cannot install or remove packages. U12.04LTS

  - by user271490

  Having read other posts, I believe that this may be less about samba than about update system. Below is the log file of the failed installation of Samba. I have been trying without success to install/outstall samba so that I could install anything else ... I cannot either install or remove samba using either update-manager or apt-get (nor indeed Software Centre). One of the errors that I have had to correct is the presence after "removal" (failed) of /usr/share/system-config-samba directory which finally allowed itself to be deleted. That, however was then ... I have U12.04LTS. running on release 63 because I allowed the upgrade to 64 this morning which fell over - no output to monitor - obviously even less support for my graphic chip than I am suffering already (see other posts in this forum). According to my interpretation of the dpkg returned errors there may be some problem with the package files, but if this is the case then it is on servers 'main', 'nantes uni fr' and 'best fr' at the very least if not everywhere. The suggestions offered at Package operation failed and elsewhere have not worked for me. This linked post suggests that a similar error is present in other packages, or that the error is in the 'update system' I have tried ... sudo apt-get remove samba ... autoremove ... install samba ... clean ... update -f all of the above In update-manager I have tried the "reload packages list" which fails to terminate because of the error. I have tried to install and remove samba from the software centre ... :( I am at a loss ... I need help, please! Firstly to recover my apt-get/update-manager/Software Centre so that I can at least carry on with my continuing installation - up to communicating with home network hence need for samba - which brings me to my second requirement ... samba. PS is the issue about "MaxReports" associated or apart? UPDATE! Being heartily sick of restarting FF every 5 seconds I thought I'd try again with Chromium ... and got the same errors from dpkg about corrupt compressed package - coincidence? Of course this was no longer in clipboard when I got here because apport has just errored ... AAARRRGGGH!!! Why does every error clear the clipboard? Thanks for any and all help!! installArchives() failed: Preconfiguring packages ... ... snip (Reading database ... ... snip (Reading database ... 184858 files and directories currently installed.) Unpacking samba (from .../samba_2%3a3.6.3-2ubuntu2.10_i386.deb) ... dpkg-deb (subprocess): data: internal gzip read error: ': data error' dpkg-deb: error: subprocess returned error exit status 2 dpkg: error processing /var/cache/apt/archives/samba_2%3a3.6.3-2ubuntu2.10_i386.deb (--unpack): subprocess dpkg-deb --fsys-tarfile returned error exit status 2 No apport report written because MaxReports is reached already Selecting previously unselected package system-config-samba. Unpacking system-config-samba (from .../system-config-samba_1.2.63-0ubuntu5_all.deb) ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for ufw ... Processing triggers for man-db ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Errors were encountered while processing: /var/cache/apt/archives/samba_2%3a3.6.3-2ubuntu2.10_i386.deb Error in function: dpkg: dependency problems prevent configuration of system-config-samba: system-config-samba depends on samba; however: Package samba is not installed. dpkg: error processing system-config-samba (--configure): dependency problems - leaving unconfigured

  Read the article

• Numerically stable(ish) method of getting Y-intercept of mouse position?

  - by Fraser

  I'm trying to unproject the mouse position to get the position on the X-Z plane of a ray cast from the mouse. The camera is fully controllable by the user. Right now, the algorithm I'm using is... Unproject the mouse into the camera to get the ray: Vector3 p1 = Vector3.Unproject(new Vector3(x, y, 0), 0, 0, width, height, nearPlane, farPlane, viewProj; Vector3 p2 = Vector3.Unproject(new Vector3(x, y, 1), 0, 0, width, height, nearPlane, farPlane, viewProj); Vector3 dir = p2 - p1; dir.Normalize(); Ray ray = Ray(p1, dir); Then get the Y-intercept by using algebra: float t = -ray.Position.Y / ray.Direction.Y; Vector3 p = ray.Position + t * ray.Direction; The problem is that the projected position is "jumpy". As I make small adjustments to the mouse position, the projected point moves in strange ways. For example, if I move the mouse one pixel up, it will sometimes move the projected position down, but when I move it a second pixel, the project position will jump back to the mouse's location. The projected location is always close to where it should be, but it does not smoothly follow a moving mouse. The problem intensifies as I zoom the camera out. I believe the problem is caused by numeric instability. I can make minor improvements to this by doing some computations at double precision, and possibly abusing the fact that floating point calculations are done at 80-bit precision on x86, however before I start micro-optimizing this and getting deep into how the CLR handles floating point, I was wondering if there's an algorithmic change I can do to improve this? EDIT: A little snooping around in .NET Reflector on SlimDX.dll: public static Vector3 Unproject(Vector3 vector, float x, float y, float width, float height, float minZ, float maxZ, Matrix worldViewProjection) { Vector3 coordinate = new Vector3(); Matrix result = new Matrix(); Matrix.Invert(ref worldViewProjection, out result); coordinate.X = (float) ((((vector.X - x) / ((double) width)) * 2.0) - 1.0); coordinate.Y = (float) -((((vector.Y - y) / ((double) height)) * 2.0) - 1.0); coordinate.Z = (vector.Z - minZ) / (maxZ - minZ); TransformCoordinate(ref coordinate, ref result, out coordinate); return coordinate; } // ... public static void TransformCoordinate(ref Vector3 coordinate, ref Matrix transformation, out Vector3 result) { Vector3 vector; Vector4 vector2 = new Vector4 { X = (((coordinate.Y * transformation.M21) + (coordinate.X * transformation.M11)) + (coordinate.Z * transformation.M31)) + transformation.M41, Y = (((coordinate.Y * transformation.M22) + (coordinate.X * transformation.M12)) + (coordinate.Z * transformation.M32)) + transformation.M42, Z = (((coordinate.Y * transformation.M23) + (coordinate.X * transformation.M13)) + (coordinate.Z * transformation.M33)) + transformation.M43 }; float num = (float) (1.0 / ((((transformation.M24 * coordinate.Y) + (transformation.M14 * coordinate.X)) + (coordinate.Z * transformation.M34)) + transformation.M44)); vector2.W = num; vector.X = vector2.X * num; vector.Y = vector2.Y * num; vector.Z = vector2.Z * num; result = vector; } ...which seems to be a pretty standard method of unprojecting a point from a projection matrix, however this serves to introduce another point of possible instability. Still, I'd like to stick with the SlimDX Unproject routine rather than writing my own unless it's really necessary.

  Read the article

• Cant finish upgrade from 11.10 to 12 on VPS based on Parallels Virtuozzo Containers, due to libc6

  - by Carmageddon

  I was stuck with this problem near the end of an upgrade: WARNING: this version of the GNU libc requires kernel version 2.6.24 or later. Please upgrade your kernel before installing glibc. The installation of a 2.6 kernel could ask you to install a new libc first, this is NOT a bug, and should NOT be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Their suggested stepds dont work on VPS, and after googling, I came up to this: Why did my upgrade to 12.04 fail with "glibc not found" or "libc6" or "requires kernel 2.6.24" error? There is comment by izx which explains my problem and proposes a workaround (might take a while to convince the guys to upgrade the kernel..). However, when I follow his instructions, I get error: # apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libc-dev-bin libc6 libc6-dev libnih1 Suggested packages: glibc-doc The following packages will be upgraded: libc-dev-bin libc6 libc6-dev libnih1 4 upgraded, 0 newly installed, 0 to remove and 394 not upgraded. 1 not fully installed or removed. Need to get 0 B/7737 kB of archives. After this operation, 233 kB disk space will be freed. Do you want to continue [Y/n]? y locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Preconfiguring packages ... (Reading database ... 35175 files and directories currently installed.) Preparing to replace libc6-dev 2.13-20ubuntu5.2 (using .../libc6-dev_2.15-0ubuntu10.3_amd64.deb) ... Unpacking replacement libc6-dev ... Preparing to replace libc-dev-bin 2.13-20ubuntu5.2 (using .../libc-dev-bin_2.15-0ubuntu10.3_amd64.deb) ... Unpacking replacement libc-dev-bin ... Preparing to replace libc6 2.13-20ubuntu5.2 (using .../libc6_2.15-0ubuntu10.3_amd64.deb) ... locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Checking for services that may need to be restarted... Checking init scripts... runlevel:/var/run/utmp: No such file or directory Checking for services that may need to be restarted... Checking init scripts... runlevel:/var/run/utmp: No such file or directory WARNING: init script for samba not found. Stopping some services possibly affected by the upgrade (will be restarted later): cron: stopping...done. WARNING: this version of the GNU libc requires kernel version 2.6.24 or later. Please upgrade your kernel before installing glibc. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Processing triggers for man-db ... locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.14' not found (required by locale) Errors were encountered while processing: /var/cache/apt/archives/libc6_2.15-0ubuntu10.3_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I also attempted to manually grab the .deb package and install it using dpkg -i, but getting: locale: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.15' not found (required by locale) Even though the file is: libc-bin_2.15-0ubuntu10+openvz0_amd64.deb

  Read the article

• broken upgrade from 10.04 to 12.04 on a VPS - recoverable?

  - by HorusKol

  I have a VPS hosted 1500 km away. It originally came with 9.10 - and this morning I decided that I really should get to an LTS release, and figured I'd jump to 12.04. Researching, I discovered that there is no direct path between 9.10 and 12.04, but that I could upgrade via 10.04. After backing up my data, I dove in. The upgrade to 10.04 was successful, and I proceeded to upgrade to 12.04. Things started to go wrong. First, I got an error with GLIBC - I retried and got the same error. That's when I stopped the upgrade. I then tried another round of apt-get update && apt-get upgrade and got a list of "unmet dependencies": apt: Depends: ubuntu-keyring but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed PreDepends: dpkg (>= 1.15.7.2) but 1.15.5.6ubuntu4.6 is to be installed apt-utils: Depends: libapt-pkg-libc6.10-6-4.8 libapt-inst1.4: Depends: libc6 (>= 2.14) but 2.11.1-0ubuntu7.11 is to be installed libapt-pkg4.12: Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed libc6: Depends: libc-bin (= 2.11.1-0ubuntu7.11) but 2.15-0ubuntu10.2 is to be installed libept0: Depends: libapt-pkg-libc6.10-6-4.8 libnih-dbus1: Depends: libnih1 (= 1.0.3-4ubuntu9) but 1.0.1-1 is to be installed I tried to see if I could do something about these - using apt-get -f install. This told me that I would need to upgrade my kernel. I found instructions on how to do this, but when I ran apt-get to install the new linux headers, I got the same dependency errors. I found another answer here where someone else had had an interruption in their upgrade - and tried the solution that worked for them: sudo apt-get -f dist-upgrade This resulted in the error: E: Could not perform immediate configuration on 'python2.7-minimal'.Please see man 5 apt.conf under APT::Immediate-Configure for details. (2) I tried to resolve this by: apt-get install -o APT::Immediate-Configure=false -f apt python-minimal But this simply ended up with this last list of dependency errors: apt: Depends: ubuntu-keyring but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed PreDepends: dpkg (>= 1.15.7.2) but 1.15.5.6ubuntu4.6 is to be installed apt-utils: Depends: libapt-pkg-libc6.10-6-4.8 libapt-inst1.4: Depends: libc6 (>= 2.14) but 2.11.1-0ubuntu7.11 is to be installed libapt-pkg4.12: Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed libc6: Depends: libc-bin (= 2.11.1-0ubuntu7.11) but 2.15-0ubuntu10.2 is to be installed libept0: Depends: libapt-pkg-libc6.10-6-4.8 libnih-dbus1: Depends: libnih1 (= 1.0.3-4ubuntu9) but 1.0.1-1 is to be installed python: Depends: python-minimal (= 2.6.5-0ubuntu1) but 2.7.3-0ubuntu2 is to be installed python-apt: Depends: libapt-pkg-libc6.10-6-4.8 python-minimal: Depends: python2.7-minimal (>= 2.7.3) but it is not going to be installed Breaks: python-support (< 1.0.10ubuntu2) but 1.0.4ubuntu1 is to be installed synaptic: Depends: libapt-pkg-libc6.10-6-4.8 Any ideas on how to dig out of this hole?

  Read the article

• Drivers for Atheros AR928X?

  - by Pato7

  I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

  Read the article

• There are 2 jobs available - which one sounds better all round [closed]

  - by Steve Gates

  I am currently employed at a company where we scrape by each year breaking even, sometimes having a little profit. The development environment is very relaxed and we have a laugh. My colleagues are not interested in improving their knowledge unless they have to, so trying to get them to adopt things like TDD is a non-starter. My development manager is stuck in .Net 2 land and refuses to use things like LINQ. He over complicates architecture and writes very unreadable code, heres an example SortedList<int,<SortedList<int,SortedList<int, MyClass>>>> The MD of the company has no drive and lets the one sales guy bring in the contracts. We are not busy all the time and this allows me time to look at new technology and learn. In terms of using things like TDD, my development manager has no problem with it and can kind of see the purpose of it, he just wont use it himself. This means I am alone in learning new things and am often resorting to StackOverflow to make sure I get things right. The company has a lot of flexibility, I can work from home if needs be and when my daughter was born they let me work from home 1 day a week however they expect this flexibility in return often asking me to travel occasionally on a Friday afternoon for the following week. Sometimes its abroad. We are also pretty much on call 24/5 as we have engineers in various countries. Also we have no testers so most of the testing is done by us developers and some testing by engineers. Either way no-one likes testing! I have been offered a role at a company I worked at 5 years ago. They were quite Victorian in their working practices but it appears to have relaxed now although I suspect still reasonably formal. There is a new team of developers I don't know and they are about to move to new offices. The team lead is a guy that was there when I was and I get the impression he takes his role seriously and likes his formal procedures and documentation. I think some of the Victorian practices may have rubbed off on him. However he did say if things crop up then as long as I can trust the person they can work at home although he prefers people in the office. The team uses SCRUM, TDD and SOLID design principles so they are quite up to date in technology. They are reasonably Microsoft focused. It appears the Technical Director might be the R&D man and research new technology on his own not allowing developers to play with new technology. He possibly might be a super developer and makes all the decisions that no can argue with. They are currently moving to Entity Framework away from NHibernate based on issues that their queries seem to fail sometimes and they feel NHibernate is stagnant. They have analysts and a QA team. The MD is focused and they are an expanding company making profit each year. I'm not sure what the team morale is and whether they have a laugh. When I had a tour around the office they were there in dead silence. I'm really unsure which role is the best for me and going with my gut instinct is useless as I'm not sure what my gut is telling me. Based on the information above which role would you choose and why?

  Read the article

• MVC Communication Pattern

  - by Kedu

  This is kind of a follow up question to this http://stackoverflow.com/questions/23743285/model-view-controller-and-callbacks, but I wanted to post it separately, because its kind of a different topic. I'm working on a multiplayer cardgame for the Android platform. I split the project into MVC which fits the needs pretty good, but I'm currently stuck because I can't figure out a good way to communicate between the different parts. I have everything setup and working with the controller being a big state machine, which is called over and over from the gameloop, and calls getter methods from the GUI and the android/network part to get the input. The input itself in the GUI and network is set by inputlisteners that set a local variable which I read in the getter method. So far so good, this is working. But my problem is, the controller has to check every input separately,so if I want to add an input I have to check in which states its valid and call the getter method from all these states. This is not good, and lets the code look pretty ugly, makes additions uncomfortable and adds redundance. So what I've got from the question I mentioned above is that some kind of command or event pattern will fit my needs. What I want to do is to create a shared and threadsafe queue in the controller and instead of calling all these getter methods, I just check the queue for new input and proceed it. On the other side, the GUI and network don't have all these getters, but instead create an event or command and send it to the controller through, for example, observer/observable. Now my problem: I can't figure out a way, for these commands/events to fit a common interface (which the queue can store) and still transport different kind of data (button clicks, cards that are played, the player id the command comes from, synchronization data etc.). If I design the communication as command pattern, I have to stick all the information that is needed to execute the command into it when its created, that's impossible because the GUI or network has no knowledge of all the things the controller needs to execute stuff that needs to be done when for example a card is played. I thought about getting this stuff into the command when executing it. But over all the different commands I have, I would need all the information the controller has, and thus give the command a reference to the controller which would make everything in it public, which is real bad design I guess. So, I could try some kind of event pattern. I have to transport data in the event. So, like the command, I would have an interface, which all events have in common, and can be stored in the shared queue. I could create a big enum with all the different events that a are possible, save one of these enums in the actual event, and build a big switch case for the events, to proceed different stuff for different events. The problem here: I have different data for all the events. But I need a common interface, to store the events in a queue. How do I get the specific data, if I can only access the event through the interface? Even if that wouldn't be a problem, I'm creating another big switch case, which looks ugly, and when i want to add a new event, I have to create the event itself, the case, the enum, and the method that's called with the data. I could of course check the event with the enum and cast it to its type, so I can call event type specific methods that give me the data I need, but that looks like bad design too.

  Read the article

• Where should instantiated classes be stored?

  - by Eric C.

  I'm having a bit of a design dilemma here. I'm writing a library that consists of a bunch of template classes that are designed to be used as a base for creating content. For example: public class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template() { //constructor } public void DoSomething() { //does something } ... } The problem is, not only is the library providing the templates, it will also supply quite a few predefined templates which are instances of these template classes. The question is, where do I put these instances of the templates? The three solutions I've come up with so far are: 1) Provide serialized instances of the templates as files. On the one hand, this solution would keep the instances separated from the library itself, which is nice, but it would also potentially add complexity for the user. Even if we provided methods for loading/deserializing the files, they'd still have to deal with a bunch of files, and some kind of config file so the app knows where to look for those files. Plus, creating the template files would probably require a separate app, so if the user wanted to stick with the files method of storing templates, we'd have to provide some kind of app for creating the template files. Also, this requires external dependencies for testing the templates in the user's code. 2) Add readonly instances to the template class Example: public class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template PredefinedTemplate { get { Template templateInstance = new Template(); templateInstance.Name = "Some Name"; templateInstance.Description = "A description"; ... return templateInstance; } } public Template() { //constructor } public void DoSomething() { //does something } ... } This method would be convenient for users, as they would be able to access the predefined templates in code directly, and would be able to unit test code that used them. The drawback here is that the predefined templates pollute the Template type namespace with a bunch of extra stuff. I suppose I could put the predefined templates in a different namespace to get around this drawback. The only other problem with this approach is that I'd have to basically duplicate all the namespaces in the library in the predefined namespace (e.g. Templates.SubTemplates and Predefined.Templates.SubTemplates) which would be a pain, and would also make refactoring more difficult. 3) Make the templates abstract classes and make the predefined templates inherit from those classes. For example: public abstract class Template { public string Name {get; set;} public string Description {get; set;} public string Attribute1 {get; set;} public string Attribute2 {get; set;} public Template() { //constructor } public void DoSomething() { //does something } ... } and public class PredefinedTemplate : Template { public PredefinedTemplate() { this.Name = "Some Name"; this.Description = "A description"; this.Attribute1 = "Some Value"; ... } } This solution is pretty similar to #2, but it ends up creating a lot of classes that don't really do anything (none of our predefined templates are currently overriding behavior), and don't have any methods, so I'm not sure how good a practice this is. Has anyone else had any experience with something like this? Is there a best practice of some kind, or a different/better approach that I haven't thought of? I'm kind of banging my head against a wall trying to figure out the best way to go. Thanks!

  Read the article

• Making user input/math on data fast, unlike excel type programs

  - by proGrammar

  I'm creating a research platform solely for myself to do some research on data. Programs like excel are terribly slow for me so I'm trying to come up with another solution. Originally I used excel. A1 was the cell that contained the data and all other cells in use calculated something on A1, or on other cells, that all could be in the end traced to A1. A1 was like an element of an array, I then I incremented it to go through all my data. This was way too slow. So the only other option I found originally was to hand code in c# the calculations inside a loop. Then I simply recompiled each time I changed my math. This was terribly slow to do and I had to order everything correctly so things would update correctly (dependencies). I could have also used events, but hand coding events for each cell like calculation would also be very slow. Next I created an application to read Excel and to perfectly imitate it. Which is what I now use. Basically I write formulas onto a fraction of my data to get live results inside excel. Then my program reads excel, writes another c# program, compiles it, and runs that program which runs my excel created formulas through a lot more data a whole lot faster. The advantage being my application dependency sorts everything (or I could use events) so I don't have to (like excel does) And of course the speed. But now its not a single application anymore. Instead its 2 applications, one which only reads my formulas and writes another program. The other one being the result which only lives for a short while before I do other runs through my data with different formulas / settings. So I can't see multiple results at one time without introducing even more programs like a database or at least having the 2 applications talking to each other. My idea was to have a dll that would be written, compiled, loaded, and unloaded again and again. So a self-updating program, sort of. But apparently that's not possible without another appdomain which means data has to be marshaled to be moved between the appdomains. Which would slow things down, not for summaries, but for other stuff I need to do with all my data. I'm also forgetting to mention a huge problem with restarting an application again and again which is having to reload ALL my data into memory again and again. But its still a whole lot faster than excel. I'm really super puzzled as to what people do when they want to research data fast. I'm completely unable to have a program accept user input and having it fast. My understanding is that it would have to do things like excel which is to evaluate strings again and again. So my only option is to repeatedly compile applications. Do I have a correct understanding on computer science? I've only just began programming, and didn't think I would have to learn much to do some simple math on data. My understanding is its either compiling my user defined stuff to a program or evaluating them from a string or something stupid again and again. And my only option is to probably switch operating systems or something to be able to have a program compile and run itself without stopping (writing/compiling dll, loading dll to program, unloading, and repeating). Can someone give me some idea on how computers work? Is anything better possible? Like a running program, that can accept user input and compile it and then unload it later? I mean heck operating systems dont need to be RESTARTED with every change to user input. What is this the cave man days? Sorry, it's just so super frustrating not knowing what one can do, and can't do. If only I could understand and learn this stuff fast enough.

  Read the article

• cannot install firmware-b43-installer

  - by unknown

  output i get when installing the installArchives() failed: Preconfiguring packages ... Preconfiguring packages ... Preconfiguring packages ... Selecting previously deselected package menu. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 216125 files and directories currently installed.) Unpacking menu (from .../menu_2.1.44ubuntu1_i386.deb) ... Selecting previously deselected package wifi-radar. Unpacking wifi-radar (from .../wifi-radar_2.0.s05-1.2_all.deb) ... Processing triggers for man-db ... Processing triggers for install-info ... Processing triggers for doc-base ... Processing 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for python-gmenu ... Rebuilding /usr/share/applications/desktop.en_US.UTF8.cache... Processing triggers for python-support ... Setting up firmware-b43-installer (4.150.10.5-5) ... --2012-10-26 08:51:30-- http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2 Resolving mirror2.openwrt.org... 46.4.11.11 Connecting to mirror2.openwrt.org|46.4.11.11|:80... failed: Connection refused. dpkg: error processing firmware-b43-installer (--configure): subprocess installed post-installation script returned error exit status 4 No apport report written because MaxReports is reached already Setting up menu (2.1.44ubuntu1) ... Processing triggers for menu ... Setting up wifi-radar (2.0.s05-1.2) ... Processing triggers for menu ... Errors were encountered while processing: firmware-b43-installer Setting up firmware-b43-installer (4.150.10.5-5) ... --2012-10-26 08:51:33-- http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2 Resolving mirror2.openwrt.org... 46.4.11.11 Connecting to mirror2.openwrt.org|46.4.11.11|:80... failed: Connection refused. dpkg: error processing firmware-b43-installer (--configure): subprocess installed post-installation script returned error exit status 4 same thing occurs when i try to install any of the wireless application. All other software installs and the same error when trying to install firmware. I tried to go the link(http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2) and download the package but found no make file found in his package. please help me.

  Read the article

• High Resolution Timeouts

  - by user12607257

  The default resolution of application timers and timeouts is now 1 msec in Solaris 11.1, down from 10 msec in previous releases. This improves out-of-the-box performance of polling and event based applications, such as ticker applications, and even the Oracle rdbms log writer. More on that in a moment. As a simple example, the poll() system call takes a timeout argument in units of msec: System Calls poll(2) NAME poll - input/output multiplexing SYNOPSIS int poll(struct pollfd fds[], nfds_t nfds, int timeout); In Solaris 11, a call to poll(NULL,0,1) returns in 10 msec, because even though a 1 msec interval is requested, the implementation rounds to the system clock resolution of 10 msec. In Solaris 11.1, this call returns in 1 msec. In specification lawyer terms, the resolution of CLOCK_REALTIME, introduced by POSIX.1b real time extensions, is now 1 msec. The function clock_getres(CLOCK_REALTIME,&res) returns 1 msec, and any library calls whose man page explicitly mention CLOCK_REALTIME, such as nanosleep(), are subject to the new resolution. Additionally, many legacy functions that pre-date POSIX.1b and do not explicitly mention a clock domain, such as poll(), are subject to the new resolution. Here is a fairly comprehensive list: nanosleep pthread_mutex_timedlock pthread_mutex_reltimedlock_np pthread_rwlock_timedrdlock pthread_rwlock_reltimedrdlock_np pthread_rwlock_timedwrlock pthread_rwlock_reltimedwrlock_np mq_timedreceive mq_reltimedreceive_np mq_timedsend mq_reltimedsend_np sem_timedwait sem_reltimedwait_np poll select pselect _lwp_cond_timedwait _lwp_cond_reltimedwait semtimedop sigtimedwait aiowait aio_waitn aio_suspend port_get port_getn cond_timedwait cond_reltimedwait setitimer (ITIMER_REAL) misc rpc calls, misc ldap calls This change in resolution was made feasible because we made the implementation of timeouts more efficient a few years back when we re-architected the callout subsystem of Solaris. Previously, timeouts were tested and expired by the kernel's clock thread which ran 100 times per second, yielding a resolution of 10 msec. This did not scale, as timeouts could be posted by every CPU, but were expired by only a single thread. The resolution could be changed by setting hires_tick=1 in /etc/system, but this caused the clock thread to run at 1000 Hz, which made the potential scalability problem worse. Given enough CPUs posting enough timeouts, the clock thread could be a performance bottleneck. We fixed that by re-implementing the timeout as a per-CPU timer interrupt (using the cyclic subsystem, for those familiar with Solaris internals). This decoupled the clock thread frequency from timeout resolution, and allowed us to improve default timeout resolution without adding CPU overhead in the clock thread. Here are some exceptions for which the default resolution is still 10 msec. The thread scheduler's time quantum is 10 msec by default, because preemption is driven by the clock thread (plus helper threads for scalability). See for example dispadmin, priocntl, fx_dptbl, rt_dptbl, and ts_dptbl. This may be changed using hires_tick. The resolution of the clock_t data type, primarily used in DDI functions, is 10 msec. It may be changed using hires_tick. These functions are only used by developers writing kernel modules. A few functions that pre-date POSIX CLOCK_REALTIME mention _SC_CLK_TCK, CLK_TCK, "system clock", or no clock domain. These functions are still driven by the clock thread, and their resolution is 10 msec. They include alarm, pcsample, times, clock, and setitimer for ITIMER_VIRTUAL and ITIMER_PROF. Their resolution may be changed using hires_tick. Now back to the database. How does this help the Oracle log writer? Foreground processes post a redo record to the log writer, which releases them after the redo has committed. When a large number of foregrounds are waiting, the release step can slow down the log writer, so under heavy load, the foregrounds switch to a mode where they poll for completion. This scales better because every foreground can poll independently, but at the cost of waiting the minimum polling interval. That was 10 msec, but is now 1 msec in Solaris 11.1, so the foregrounds process transactions faster under load. Pretty cool.

  Read the article

• Encryption is hard: AES encryption to Hex

  - by Rob Cameron

  So, I've got an app at work that encrypts a string using ColdFusion. ColdFusion's bulit-in encryption helpers make it pretty simple: encrypt('string_to_encrypt','key','AES','HEX') What I'm trying to do is use Ruby to create the same encrypted string as this ColdFusion script is creating. Unfortunately encryption is the most confusing computer science subject known to man. I found a couple helper methods that use the openssl library and give you a really simple encryption/decryption method. Here's the resulting string: "\370\354D\020\357A\227\377\261G\333\314\204\361\277\250" Which looks unicode-ish to me. I've tried several libraries to convert this to hex but they all say it contains invalid characters. Trying to unpack it results in this: string = "\370\354D\020\357A\227\377\261G\333\314\204\361\277\250" string.unpack('U') ArgumentError: malformed UTF-8 character from (irb):19:in `unpack' from (irb):19 At the end of the day it's supposed to look like this (the output of the ColdFusion encrypt method): F8E91A689565ED24541D2A0109F201EF Of course that's assuming that all the padding, initialization vectors, salts, cypher types and a million other possible differences all line up. Here's the simple script I'm using to encrypt/decrypt: def aes(m,k,t) (aes = OpenSSL::Cipher::Cipher.new('aes-256-cbc').send(m)).key = Digest::SHA256.digest(k) aes.update(t) << aes.final end def encrypt(key, text) aes(:encrypt, key, text) end def decrypt(key, text) aes(:decrypt, key, text) end Any help? Maybe just a simple option I can pass to OpenSSL::Cipher::Cipher that will tell it to hex-encode the final string?

  Read the article

• XNA vs SlimDX for offscreen renderer

  - by Groky

  Hello, I realise there are numerous questions on here asking about choosing between XNA and SlimDX, but these all relate to game programming. A little background: I have an application that renders scenes from XML descriptions. Currently I am using WPF 3D and this mostly works, except that WPF has no way to render scenes offscreen (i.e. on a server, without displaying them in a window), and also rendering to a bitmap causes WPF to fallback to software rendering. So I'm faced with having to write my own renderer. Here are the requirements: Mix of 3D and 2D elements. Relatively few elements per scene (tens of meshes, tens of 2D elements). Large scenes (up to 3000px square for print). Only a single frame will be rendered (i.e. FPS is not an issue). Opacity masks. Pixel shaders. Software fallback (servers may or may not have a decent gfx card). Possibility of being rendered offscreen. As you can see it's pretty simple stuff and WPF can manage it quite nicely except for the not-being-able-to-export-the-scene problem. In particular I don't need many of the things usually needed in game development. So bearing that in mind, would you choose XNA or SlimDX? The non-rendering portion of the code is already written in C#, so want to stick with that.

  Read the article

• Android ASync task ProgressDialog isn't showing until background thread finishes

  - by jackbot

  I've got an Android activity which grabs an RSS feed from a URL, and uses the SAX parser to stick each item from the XML into an array. This all works fine but, as expected, takes a bit of time, so I want to use AsyncActivity to do it in the background. My code is as follows: class AddTask extends AsyncTask<Void, Item, Void> { protected void onPreExecute() { pDialog = ProgressDialog.show(MyActivity.this,"Please wait...", "Retrieving data ...", true); } protected Void doInBackground(Void... unused) { items = parser.getItems(); for (Item it : items) { publishProgress(it); } return(null); } protected void onProgressUpdate(Item... item) { adapter.add(item[0]); } protected void onPostExecute(Void unused) { pDialog.dismiss(); } } Which I call in onCreate() with new AddTask().execute(); The line items = parser.getItems() works fine - items being the arraylist containing each item from the XML. The problem I'm facing is that on starting the activity, the ProgressDialog which i create in onPreExecute() isn't displayed until after the doInBackground() method has finished. i.e. I get a black screen, a long pause, then a completely populated list with the items in. Why is this happening? Why isn't the UI drawing, the ProgressDialog showing, the parser getting the items and incrementally adding them to the list, then the ProgressDialog dismissing?

  Read the article

• Can somebody explain the differences, status and future of the various ASP.NET AJAX libraries and to

  - by tjrobinson

  I'm confused about the differences and relationships between the various Microsoft ASP.NET AJAX components/libraries/toolkits and particularly the naming of them. It starts off relatively simple with ASP.NET AJAX itself: ASP.NET AJAX 1.0 (available for ASP.NET 2.0 in a separate package called ASP.NET 1.0 Extensions) ASP.NET AJAX 3.5 (included with ASP.NET 3.5) ASP.NET AJAX 4.0 (included with ASP.NET 4.0) Then come the various projects on CodePlex and elsewhere: ASP.NET AJAX Control Toolkit (aka Original Ajax Control Toolkit) Samples CodePlex It seems that the September 2009 Release is the final release of the Original Ajax Control Toolkit and that it's been superseded by... Ajax Control Toolkit in ASP.NET Ajax Library It looks like the old ASP.NET AJAX Control Toolkit has now become part of a larger ASP.NET Ajax Library but is still maintained seperately on CodePlex. This release is in beta at time of writing so presumably if I want to use the "Control Toolkit" I should stick with the September 2009 Release of the Original ASP.NET AJAX Control Toolkit CodePlex Microsoft Ajax Library Preview Is this the same as the ASP.NET Ajax Library mentioned above just with a confusing name variation? Is the "Control Toolkit" included in Preview 6 and is it older newer or older than the code in Ajax Control Toolkit in ASP.NET Ajax Library? CodePlex Microsoft ASP.NET Ajax Wiki - note the inconsistent insertion of ASP.NET into the name Links to useful articles, roadmaps would be useful.

  Read the article

• NSTextField autocomplete

  - by Rasmus Styrk

  Does anyone know of any class or lib that can implement autocompletion to an NSTextField? I'am trying to get the standard autocmpletion to work but it is made as a synchronous api. I get my autocompletion words via an api call over the internet. What have i done so far is: - (void)controlTextDidChange:(NSNotification *)obj { if([obj object] == self.searchField) { [self.spinner startAnimation:nil]; [self.wordcompletionStore completeString:self.searchField.stringValue]; if(self.doingAutocomplete) return; else { self.doingAutocomplete = YES; [[[obj userInfo] objectForKey:@"NSFieldEditor"] complete:nil]; } } } When my store is done, i have a delegate that gets called: - (void) completionStore:(WordcompletionStore *)store didFinishWithWords:(NSArray *)arrayOfWords { [self.spinner stopAnimation:nil]; self.completions = arrayOfWords; self.doingAutocomplete = NO; } The code that returns the completion list to the nstextfield is: - (NSArray *)control:(NSControl *)control textView:(NSTextView *)textView completions:(NSArray *)words forPartialWordRange:(NSRange)charRange indexOfSelectedItem:(NSInteger *)index { *index = -1; return self.completions; } My problem is that this will always be 1 request behind and the completion list only shows on every 2nd char the user inputs. I have tried searching google and SO like a mad man but i cant seem to find any solutions.. Any help is much appreciated.

  Read the article

< Previous Page | 123 124 125 126 127 128 129 130 131 132 133 134  | Next Page >