Search Results

Search found 5995 results on 240 pages for 'compiler flags'.

Page 128/240 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

• How to Structure a Trinary state in DB and Application

  - by ABMagil

  How should I structure, in the DB especially, but also in the application, a trinary state? For instance, I have user feedback records which need to be reviewed before they are presented to the general public. This means a feedback reviewer must see the unreviewed feedback, then approve or reject them. I can think of a couple ways to represent this: Two boolean flags: Seen/Unseen and Approved/Rejected. This is the simplest and probably the smallest database solution (presumably boolean fields are simple bits). The downside is that there are really only three states I care about (unseen/approved/rejected) and this creates four states, including one I don't care about (a record which is seen but not approved or rejected is essentially unseen). String column in the DB with constants/enum in application. Using Rating::APPROVED_STATE within the application and letting it equal whatever it wants in the DB. This is a larger column in the db and I'm concerned about doing string comparisons whenever I need these records. Perhaps mitigatable with an index? Single boolean column, but allow nulls. A true is approved, a false is rejected. A null is unseen. Not sure the pros/cons of this solution. What are the rules I should use to guide my choice? I'm already thinking in terms of DB size and the cost of finding records based on state, as well as the readability of code the ends up using this structure.

  Read the article

• Install Ubuntu on Asus Eee-PC 1005PE - Dealing with special partitions

  - by MestreLion

  I have an Asus EeePC 1005PE netbook and im planning on doing a massive re-partitioning (going to install Ubuntu, Mint, XP, etc) Ive noticed it has 2 "special" partitions: a 10Gb Fat32 RESTORE hidden partition (used by BIOS "F9 recovery" feature) and a 16Mb "unknown" partition at the end of the drive (used by BIOS "Boot Booster" feature). So, for both partitions, my question is: Can I move/resize the recovery partition freely? What are the requirements for it? (i mean, for it still be found by BIOS when i press F9/Activate BootBooster?). Partition table order? Partition type? Flags? Label? UUID? Can i make it a Logical (instead of primary) partition? Does it must be the flagged as boot? And, more importantly: where can i find any official documentation about it? Ive ready many (mis)information about it... some say Boot Booster partition must be last (in partition table), some say Recovery must be 2nd, that it must be bootable, etc. How can I know what is really needed for the BIOS to use both F9 and Boot Booster? Note: Im using gParted from a Live USB Stick (Mint 10 / Ubuntu 10.10), and ive noticed that, since the filesystem type of the Boot Booster is not recongnized, it cant move or resize it. Can I delete it and re-create it somewhere else? Whenever i create a 0xEF partition gParted crashes and quits and i cannot open it again (must delete the partition using fdisk / cfdisk)

  Read the article

• Ubuntu 12.04 - syslog showing "SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled"

  - by Tom G

  I have been seeing these random logs in syslog on our production system. There is no XFS setup. Fstab only shows local partitions, only EXT3 . There is nothing in crontabs either. The only file system related package I have installed is 'nfs-kernel-server' Kernel version is 3.2.0-31-generic . kernel: [601730.795990] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled kernel: [601730.798710] SGI XFS Quota Management subsystem kernel: [601730.828493] JFS: nTxBlock = 8192, nTxLock = 65536 kernel: [601730.897024] NTFS driver 2.1.30 [Flags: R/O MODULE]. kernel: [601730.964412] QNX4 filesystem 0.2.3 registered. kernel: [601731.035679] Btrfs loaded os-prober: debug: running /usr/lib/os-probes/mounted/10freedos on mounted /dev/vda1 10freedos: debug: /dev/vda1 is not a FAT partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/10qnx on mounted /dev/vda1 10qnx: debug: /dev/vda1 is not a QNX4 partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/20macosx on mounted /dev/vda1 macosx-prober: debug: /dev/vda1 is not an HFS+ partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/20microsoft on mounted /dev/vda1 20microsoft: debug: /dev/vda1 is not a MS partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/30utility on mounted /dev/vda1 30utility: debug: /dev/vda1 is not a FAT partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/40lsb on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/70hurd on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/80minix on mounted /dev/vda1 debug: running /usr/lib/os-probes/mounted/83haiku on mounted /dev/vda1 83haiku: debug: /dev/vda1 is not a BeFS partition: exiting os-prober: debug: running /usr/lib/os-probes/mounted/90bsd-distro on mounted /dev/vda1 83haikuos-prober: debug: running /usr/lib/os-probes/mounted/90linux-distro on mounted /dev/vda1 os-prober: debug: running /usr/lib/os-probes/mounted/90solaris on mounted /dev/vda1 os-prober: debug: /dev/vda2: is active swap Why would this randomly show up? This also spawns multiple "jfsCommit" processes.

  Read the article

• "The volume filesystem root has only..."

  - by jcslzr

  I am having this problem in ubuntu 12.04, but I fin strange that when I go to /tmp it wont allow me to delete some files, with message "Operation not permitted" or "this file could not be handled because you dont have permissions to read it". It is only a PC and I have the root password. I was trying to get at least 2000 MB of free space on the root file system to upgrade to 12.10 and see if that resolved the problem. Currently free space on root file system is 190 MB. This is my output: root@jcsalazar-Vostro-3550:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 7688360 7112824 184984 98% / udev 2009288 4 2009284 1% /dev tmpfs 806636 1024 805612 1% /run none 5120 0 5120 0% /run/lock none 2016584 5316 2011268 1% /run/shm /dev/sda5 472036 255920 191745 58% /boot /dev/sda7 30758848 7085480 22110900 25% /home root@jcsalazar-Vostro-3550:~# sudo parted -l Model: ATA TOSHIBA MK3261GS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 278GB 262GB primary ntfs 4 278GB 320GB 41.9GB extended 5 278GB 279GB 499MB logical ext4 6 279GB 287GB 7999MB logical ext4 7 287GB 319GB 32.0GB logical ext4 8 319GB 320GB 1443MB logical linux-swap(v1) I apprecciate any new ideas that can help me. Thnx Carlos

  Read the article

• EDQ Technical Enablement for OPN (Prague - June 17-19)

  - by milomir.vojvodic

  Oracle Enterprise Data Quality (EDQ) Technical Enablement and Partner Training Trusted Data for Your Enterprise Applications Oracle Enterprise Data Quality helps organizations achieve maximum value from their business-critical applications by delivering fit-for-purpose data. These products also enable individuals and collaborative teams to quickly and easily identify and resolve any problems in underlying data. With Oracle Enterprise Data Quality, customers can identify new opportunities, improve operational efficiency, and more efficiently comply with industry or governmental regulation. Oracle Enterprise Data Quality is designed to serve as a very channel friendly platform to OPN.  This means that pre-built extensions, components and even complete business solutions can readily be built and shared.  This allows our customers/partners to be highly efficient in how they deploy custom business solutions, but also allows our partners to develop specialized components, domain knowledge and even complete business solutions. Training is suitable for: · Database administrators · Architects · Technical staff Objectives of the training: After completing this course, participants should: · Have an understanding of the core functionality of EDQ across profiling, auditing, transforming, parsing and matching data · Be able to describe some of the key capabilities and benefits delivered by EDQ · Be able to create and run standalone EDQ processes and jobs · Be ready to start working with data from customers and (with practice) be able to demonstrate EDQ to customers Agenda 17th June Fundamentals For Demoing (Profile, Audit, Transform and More) Profiling Auditing Transforming Writing and exporting data Jobs and scheduling Publishing, packaging and copying EDQ processes Introduction to the Customer Data Extension Pack Realtime Processing via Web Services The Server Console Run Profiles Data Interfaces Sampling Publishing metrics to the Dashboard Users and security 18th June Matching Matching overview Basic matching configuration Matching rule hierarchies Clustering Merging Reviewing possible matches Outputting Match Data Case study 19th June Address Verification Address Verification Overview Configuration Accuracy Flags Parsing Parsing Overview Phrase profiling Tailoring a CDEP Parser Base Tokenization Classification Reclassification Selection Resolution Register Here Don’t miss this FREE event. Space is limited. Oracle University V Parku 2294/4 148 00 Praha 4 17.6. – 19.6. 2014 09:00 a.m.– 17:30 p.m.

  Read the article

• Need a good quality bitmap rotation algorithm for Android

  - by Lumis

  I am creating a kaleidoscopic effect on an android tablet. I am using the code below to rotate a slice of an image, but as you can see in the image when rotating a bitmap 60 degrees it distorts it quite a lot (red rectangles) – it is smudging the image! I have set dither and anti-alias flags but it does not help much. I think it is just not a very sophisticated bitmap rotation algorithm. canvas.save(); canvas.rotate(angle, screenW/2, screenH/2); canvas.drawBitmap(picSlice, screenW/2, screenH/2, pOutput); canvas.restore(); So I wonder if you can help me find a better way to rotate a bitmap. It does not have to be fast, because I intend to use a high quality rotation only when I want to save the screen to the SD card - I would redraw the screen in memory before saving. Do you know any comprehensible or replicable algorithm for bitmap rotation that I could programme or use as a library? Or any other suggestion? EDIT: The answers below made me think if Android OS had bilinear or bicubic interpolation option and after some search I found that it does have its own version of it called FilterBitmap. After applying it to my paint pOutput.setFilterBitmap(true); I get much better result

  Read the article

• What is a 'good number' of exceptions to implement for my library?

  - by Fuzz

  I've always wondered how many different exception classes I should implement and throw for various pieces of my software. My particular development is usually C++/C#/Java related, but I believe this is a question for all languages. I want to understand what is a good number of different exceptions to throw, and what the developer community expect of a good library. The trade-offs I see include: More exception classes can allow very fine grain levels of error handling for API users (prone to user configuration or data errors, or files not being found) More exception classes allows error specific information to be embedded in the exception, rather than just a string message or error code More exception classes can mean more code maintenance More exception classes can mean the API is less approachable to users The scenarios I wish to understand exception usage in include: During 'configuration' stage, which might include loading files or setting parameters During an 'operation' type phase where the library might be running tasks and doing some work, perhaps in another thread Other patterns of error reporting without using exceptions, or less exceptions (as a comparison) might include: Less exceptions, but embedding an error code that can be used as a lookup Returning error codes and flags directly from functions (sometimes not possible from threads) Implemented an event or callback system upon error (avoids stack unwinding) As developers, what do you prefer to see? If there are MANY exceptions, do you bother error handling them separately anyway? Do you have a preference for error handling types depending on the stage of operation?

  Read the article

• Ubuntu Server 12.04 as a router. Problem with DNS?? Or Routing table?

  - by Lorenzo

  I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

  Read the article

• Structure of a .NET Assembly

  - by Om Talsania

  Assembly is the smallest unit of deployment in .NET Framework.When you compile your C# code, it will get converted into a managed module. A managed module is a standard EXE or DLL. This managed module will have the IL (Microsoft Intermediate Language) code and the metadata. Apart from this it will also have header information.The following table describes parts of a managed module.PartDescriptionPE HeaderPE32 Header for 32-bit PE32+ Header for 64-bit This is a standard Windows PE header which indicates the type of the file, i.e. whether it is an EXE or a DLL. It also contains the timestamp of the file creation date and time. It also contains some other fields which might be needed for an unmanaged PE (Portable Executable), but not important for a managed one. For managed PE, the next header i.e. CLR header is more importantCLR HeaderContains the version of the CLR required, some flags, token of the entry point method (Main), size and location of the metadata, resources, strong name, etc.MetadataThere can be many metadata tables. They can be categorized into 2 major categories.1. Tables that describe the types and members defined in your code2. Tables that describe the types and members referenced by your codeIL CodeMSIL representation of the C# code. At runtime, the CLR converts it into native instructions

  Read the article

• Install Windows7 on drive with Ubuntu 12.04 already on. Is my plan good?

  - by John F

  I have Ubuntu 12.04 working fine, but need W7 occasionally. I just wanted to check that my plan for installing would work? Any help appreciated. Current partitions are: Partition....@ File System @ Mount Point @ Size.....@ Used.....@ Flags /dev/sda1....@ ext4........@ /ext4a......@ 37 GiB...@ 776 MiB..@ boot /dev/sda2....@ extended....@.............@ 122 GiB..@ -........@ ./dev/sda5...@ ext4........@ / ..........@ 37 GiB...@ 6 GiB....@ .unallocated @ unallocated @.............@ 7 GiB....@ - ...... @ ./dev/sda6 ..@ ext4........@ /home.......@ 77 GiB...@ 32 GiB...@ .unallocated @ unallocated @.............@ 65 GiB...@ - .......@ /dev/sda3...@ linux-swap..@.............@ 7 GiB....@ - .......@ My plan is to: - boot to ubuntu from USB ISO - change sda1 to NTFS - install W7 to sda1 - use the "Master Boot Record repair" utility to configure dual boot so I can see my original ubuntu installation as well as W7. Have I missed something? I'm concerned as to what the 776MB is that will be overwritten by the change to NTFS. It seems large for just the MBR? Would also appreciate it if anyone can explain what sda5 and 6 are being used for? Is sda5 Ubuntu and sda6 my data? Thanks in advance.

  Read the article

• What are some good ways for an intermediate programmer to build skills?

  - by Jordan

  Preface: I work mostly in Python, and Web Dev languages (HTML, CSS, Javascript and Jquery, PHP) I'm proficient at coding but I want to get better. In larger more advanced projects my programming skills break down. The more code there is the more trouble I have fitting all the pieces together. I understand syntax well, and I can catch and correct errors fairly easier. But the more advanced it gets the more I struggle. I believe I have a good understand of the basic and nuts and bolts of programming and I understand what's going on, but when it comes to larger projects, especially ones with heavy math involved my confidence flags and I start making mistakes. It's not that I can't do it, I'm just not used to doing it. Does anyone have any advice for someone who knows programming, but wants to get better? The only tutorials I can really find are beginner basic type stuff. Basically what I'm saying is I want to be confident when I'm tackling advanced projects, but I can't because I have little experience dealing with difficult situations.

  Read the article

• Removing ocurrances of characters in a string

  - by DmainEvent

  I am reading this book, programming Interviews exposed by John Wiley and sons and in chapter 6 they are discussing removing all instances of characters in a src string using a removal string... so removeChars(string str, string remove) In there writeup they sey the steps to accomplish this are to have a boolean lookup array with all values initially set to false, then loop through each character in remove setting the corresponding value in the lookup array to true (note: this could also be a hash if the possible character set where huge like Unicode-16 or something like that or if str and remove are both relatively small... < 100 characters I suppose). You then iterate through the str with a source and destination index, copying each character only if its corresponding value in the lookup array is false... Which makes sense... I don't understand the code that they use however... They have for(src = 0; src < len; ++src){ flags[r[src]] == true; } which is turning the flag value at the remove string indexed at src to true... so if you start out with PLEASE HELP as your str and LEA as your remove you will be setting in your flag table at 0,1,2... t|t|t but after that you will get an out of bounds exception because r doesn't have have anything greater than 2 in it... even using there example you get an out of bounds exception... Am is there code example unworkable?

  Read the article

• M-Audio Delta 1010LT on 12.04

  - by user74039

  I have 12.04 64bit installed, my soundcard is a Delta 1010LT, it seems to be partially detected, I've been following steps here: https://help.ubuntu.com/community/SoundTroubleshooting/ lspci -v | grep -A7 -i "audio" shows this: 04:07.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. M-Audio Delta 1010LT Flags: bus master, medium devsel, latency 64, IRQ 22 I/O ports at ec00 [size=32] I/O ports at e880 [size=16] I/O ports at e800 [size=16] I/O ports at e480 [size=64] Capabilities: <access denied> Kernel driver in use: snd_ice1712 aplay shows this: **** List of PLAYBACK Hardware Devices **** card 0: M1010LT [M Audio Delta 1010LT], device 0: ICE1712 multi [ICE1712 multi] Subdevices: 1/1 Subdevice #0: subdevice #0 In the sound settings on the desktop all I see is the ICE1712 S/PDIF, which I don't use, I want to use the individual outputs on the card, I'm not so bothered about inputs, I just want the playback for now. If I open alsamixer in the console, I see all of the output and input channels, i've raised the volume on them but I don't get anything in the sound settings on the desktop and when I play any sound, I hear nothing. Can someone help?

  Read the article

• Audio not working in 12.10

  - by frampy

  I did a clean install of 12.10, when I open Sound Settings in gnome the only device in the list is "Dummy Output", and sound is not working. Sound worked fine out of the box in 12.04 I ran alsamixer, it says my card is "HDA Intel", and chip is "Realtek ALC880". The alsamixer playback output was set to mute at first, unmuting did not fix. I checked out the info at http://www.unixmen.com/2012003-howto-resolve-nosound-problem-on-ubuntu/ as suggested on a similar question, I've done everything there except installing the ubuntu audio dev team driver. Should I try install this? Edit: I've been reading the sound troubleshooting guide at https://help.ubuntu.com/community/SoundTroubleshooting It looks like Ubuntu is finding my audio device correctly. mike@wucade:~$ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) Subsystem: Albatron Corp. Device 2668 Flags: bus master, fast devsel, latency 0, IRQ 40 Memory at d01c0000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Still stuck as to why this isn't working.

  Read the article

• Solutions for "Maintenance Mode"

  - by Ka Lyse

  Given a web application running across 10+ servers, what techniques have you put in place for doing things like altering the state of your website so that you can implement certain features. For instance, you might want to: Restrict Logins/Disable Certain Features Turn Site to "Read Only" Turn Site to Single "Maintenance Mode" page. Doing any of the above is pretty trivial. You can throw a particular "flag" in an .ini file, or add a row/value to a site_options table in your database and just read that value and do the appropriate thing. But these solutions have their problems. Disadvantages/Problems For instance, if you use a file for your application, and you want to switch off a certain feature temporarily, then you need to update this file on all servers. So then you might want to look at running something like ZooKeeper, but you are probably overcomplicating things. So then, you might decide that you want to store these "feature" flags in a database. But then you are obviously adding unncessary queries to each page request. So you think to yourself, that you will throw memcached in to the mix and just cache the query. Then you just retrieve all of your "Features" from memcached and add a 2ms~ latency to your application on every page. So to get around this, you decide to use a two tier-cache system, whereby you use an inmemory cache on each machine, (like Apc/Redis etc). This would work, but then it gets complicated, because you would have to set the key/hash life to perhaps 60 seconds, so that when you purge/invalidate the memcached object storing your "Features" result, your on machine cache is prompt enough to get the the new states. What suggestions might you have? Keeping in mind that optimization/efficiency is the priority here.

  Read the article

• Librated error when creating partition table

  - by Marko

  I bought a Dell Inspiron 5521 laptop a few days ago that came with Ubuntu preinstalled. I haven't used Ubuntu yet, and I don't have any experience in using it. I wanted to install Windows 7 64-bit on my laptop alongside Ubuntu, and made two bootable USB drives with Gparted and Windows 7. There wasn't a suitable partition on my laptop in which I could install Windows 7. I've read the instructions for using Gparted to create or manage my hard drive. I inserted the USB, booted from BIOS, and followed the procedure in installing Gparted. Then I entered Gparted, and the following error occurred: Librated error when Creating partition table. It asked me to click on either OK or Cancel. Either way I had my hard disk shown to me in the user window, in partitions that were made by the manufacturer: Partition File sys Label Size Flags /dev/sda1 fat32 dellutility 300.00 Mib diag /dev/sda2 fat32 os 3.00 Gib lba /dev/sda3 ext4 912.46 Gib boot /dev/sda4 extended 15.75 Gib (had a subpart) /dev/sda5 linux-swap 15.75 Gib ...and a option to switch to dev/sdb that's unused and of capacity 3Gib. I've used the biggest partition 912.46 Gib, and tried to reduce its size, and clicked OK. Then when I tried to make a new partition, it said it can't make any more partitions, no more than a maximum of 5. I would like to keep Ubuntu and slowly learn, but I also need to use programs that work in Windows. Thank you for taking the time to answer my question.

  Read the article

• How to enable logging for Google Chrome in Ubuntu 12.04?

  - by skytreader

  I'm trying to capture the logs for a certain bug I'm having with Google Chrome. However, I can't find/enable logs for GC. According to this Chromium project page, I just need to add the flags --enable-logging --v=1 and a chrome_debug.log file will appear in my user data directory. However, after running GC (and closing through the 'X' title bar button) there is no chrome_debug.log file in the specified directory. I even tried running as root as it may have something to do with write permissions but GC refuses to start as root. Another thing, GC also prints messages when invoked from command line. I tried capturing this and redirecting them to a file via $ google-chrome > today.log but the messages are still printed in the command line and the file I specify gets created but remains empty. Note that I can't just copy-paste the messages printed on terminal after my bug occurs as the bug freezes up my whole system that, when it occurs, my only option is to turn off my computer straight via the power button. I've seen a few similar bugs already posted but I find that they don't exactly describe my situation so I'd really like to get some logs for this. So how do I enable logging or, at least, get those terminal messages in a file?

  Read the article

• Ubuntu cannot see Windows 7 partitions on install

  - by Nash0

  I've been trying to install Ubuntu 10.10 as a dual boot with Windows 7 on my Dell latitude e6510. It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux. The issue I'm having is that when I run Ubuntus installer by booting from CD it sees the entire hard drive as unallocated space. I have also tried Kbuntu 10.10, Fedora 14, booting a Gparted 0.8.0 usb drive, and Ubuntu "install in Windows" with wubi they all have problems. EDIT: When I run the "try Ubuntu" option on booting from cd it can mount my Windows partition and I can view the files. The output of sudo parted -l when running in try Ubuntu mode: Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA ST9500420AS (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• What version was installed? x64 or i686? What's the difference exactly?

  - by Seppo

  Okay, so heres my problem. I recently started migrating several services to individual VMs on my box, using VirtualBox 4.1. I created a new VirtualBox VM with guest type "Ubuntu (64 Bit)". I've already done this before and it worked like a charm. I then installed unbutu server (12.04) from the exact same dvd image. All the time I thought that it should have installed x64. I already put a few hours work into the new VM, migrating the webserver and mail system etc. Today I tried installing a x64 piece of software and it suddenly told me that it needed x64 and I had only i686. I checked uname -a and this is what it gave me: Linux hostname 3.2.0-29-generic-pae #46-Ubuntu SMP Fri Jul 27 17:25:43 UTC 2012 i686 i686 i386 GNU/Linux Any guesses what went wrong? All the time I was thinking I had a x64 system. Any way to move to a "real" x64? I have a second VM on this host which is running x64 just fine .. P.S.: grep --color=always -iw lm /proc/cpuinfo returns lm among the flags.

  Read the article

• How to handle notifications to several partial views of the same model?

  - by Seki

  I am working on refactoring an old simulation of a Turing machine. The application uses a class that contains the state and the logic of program execution, and several panels to display the tape representation and show the state, messages, and the GUI controls (start, stop, program listing, ...). I would like to refactor it using the MVC architecture that was not used originaly: the Frame is the only way to get access to the different panels and there is also a strong coupling between the "engine" class and the GUI updates in the way of frame.displayPanel.state.setText("halted"); or frame.outputPanel.messages.append("some thing"); It looks to me that I should put the state related code into an observable model class and make the different panels observers. My problem is that the java Observable class only provides a global notification to the Observers, while I would prefer not to refresh every Observers everytime, but only when the part that specificaly observe has changed. I am thinking of implementing myself several vectors of listeners (for the state / position, for the output messages, ...) but I feel like reinventing the wheel. I though also about adding some flags that the observers could check like isNewMessageAvailable(), hasTapeMoved(), etc but it sounds also approximative design. BTW, is it ok to keep the fetch / execute loop into the model or should I move it in another place? We can think in a theorical ideal way as I am completely revamping this small application.

  Read the article

• What is the preferred pattern when attaching a 'runtime object'?

  - by sebf

  In my application I have the following: public class NeatObject { /* lots of static data, and configuration flags */ } public class NeatObjectConsumer { void DoCleverStuffWithObjectOnGPU(NeatObject obj); } Where NeatObject and its consumer are used to control the GPU. The idea being that, the configuration of an instance of NeatObject and its members, define how the consumer instance behaves. The object can be passed around, edited, and most importantly serialised/deserialised by the application, with and without knowledge of NeatObjectConsumer, then provided back to the consumer to do something else. The purpose of this seperation is: The consumer manages hardware resources, which change depending on the computer, and even on the execution of the application, making preserving the state of an object which does everything difficult. Avoids circular references if the assembly that contains the consumer needs to reference one that only needs to know about NeatObject. However, there is a complication in that the consumer creates hardware resources and needs to associate them with NeatObject. These don't need to be preserved, but still need to be retrieved. DoCleverStuffWithObjectOnGPU() will be called many, many times during execution and so any bottleneck is a concern, therefore I would like to avoid dictionary lookups. What is the preferred method of attaching this information to NeatObject? By preferred, I mean intuitive - other coders can see immediately what is going on - and robust - method doesn't invite playing with the resources or present them in such a way as to make them easily corruptible. Essentially, I want to add my own metadata - how should I do it? Try to use 'actual metadata' functionality like Reflection? A member of the type of an abstract class? Unmanaged pointers? If you took on a project that used this pattern, what would you have liked the previous developer to do?

  Read the article

• Tips on installing Visual Studio 2010 SP1

  - by Jon Galloway

  Visual Studio SP1 went up on MSDN downloads (here) on March 8, and will be released publicly on March 10 here. Release announcements: Soma: Visual Studio 2010 enhancements Jason Zander: Announcing Visual Studio 2010 Service Pack 1 I started on this post with tips on installing VS2010 SP1 when I realized I’ve been writing these up for Visual Studio and .NET framework SP releases for a while (e.g. VS2008 / .NET 3.5 SP1 post, VS2005 SP1 post). Looking back the years of Visual Studio SP installs (and remembering when we’d get up to SP6 for a Visual Studio release), I’m happy to see that it just keeps getting easier. Service Packs are a lot less finicky about requiring beta software to be uninstalled, install more quickly, and are just generally a lot less scary. If I can’t have a jetpack, at least my future provided me faster, easier service packs. Disclaimer: These tips are just general things I've picked up over the years. I don't have any inside knowledge here. If you see anything wrong, be sure to let me know in the comments. You may want to check the readme file before installing - it's short, and it's in that new-fangled HTML format. On with the tips! Before starting, uninstall Visual Studio features you don't use Visual Studio service packs (and other Microsoft service packs as well) install patches for the specific features you’ve got installed. This is a big reason to always do a custom install when you first install Visual Studio, but it’s not difficult to update your existing installation. Here’s the quick way to do that: Tap the windows key and type “add or remove programs” and press enter (or click on the “Add or remove programs” link if you must).   Type “Visual Studio 2010” in the search box in the upper right corner, click on the Visual Studio program (the one with the VS infinity looking logo) and click on Uninstall/Change. Click on Add or Remove Features The next part’s up to you – what features do you actually use? I’ve been doing primarily ASP.NET MVC development in C# lately, so I selected Visual C# and Visual Web Developer. Remember that you can install features later if needed, and can also install the express versions if you want. Selecting everything just because it’s there - or you paid for it – means that you install updates for everything, every time. When you’ve made your changes, click on the Update button to uninstall unused features. Shut down all instances of Visual Studio It probably goes without saying that you should close a program down before installing it, partly to avoid the file-in-use-reboot-after-install horror. Additional "hunch / works on my machine" quality tip: On one computer I saw a note in the setup log about Visual Studio a prompt for user input to close Visual Studio, although I never saw the prompt. Just to  be sure, I'd personally open up Task Manager and kill any devenv.exe processes I saw running, as it couldn't hurt. Use the web installer I use the Web Installers whenever possible. There’s no point in downloading the DVD unless you’re doing multiple installs or won’t have internet access. The DVD IS is 1.5GB, since it needs to be able to service every possible supported installation option on both x86 and x64. The web installer is 776 KB (smaller than calc.exe), so you can start the installation right away. Like other web installers, the real benefit is that it only installs the updates you need (hence the reason for step 1 – uninstalling unused components). Instead of 1.5GB, my download was roughly 530MB. If you’re installing from MSDN (this link takes you right to the Visual Studio installs), select the first one on the list: The first step in the installation process is to analyze the machine configuration and tell you what needs to be installed. Since I've trimmed down my features, that's a pretty short list. The time's not far off where I may not install SQL Server on my dev machines, just using SQL Server Compact - that would shorten the list further. When I hit next, you can see that the download size has shrunk considerably. When I start the install, note that the installation begins while other components are downloading - another benefit of the web install. On my mid-range desktop machine, the install took 25 minutes. What if it takes longer? According to Heath Stewart (Visual Studio installer guru), average SP1 installs take roughly 45 minutes. An installation which takes hours to complete may be a sign of a problem: see his post Visual Studio 2010 Service Pack 1 installing for over 2 hours could be a sign of a problem. Why so long? Yes, even 25 minutes is a while. Heath's got another blog post explaining why the update can take longer than the initial install (see: A patch may take as long or longer to install than the target product) which explains all the additional steps and complexities a patch needs to deal with, as well as some mitigation steps that deployment authors can take to mitigate the impact. Other things to know about Visual Studio 2010 SP1 Installs over Visual Studio 2010 SP1 Beta That's nice. Previous Visual Studio versions did a number of annoying things when you installed SP's over beta's - fail with weird errors, get part way through and tell you needed to cancel and uninstall first, etc. I've installed this on two machines that had random beta stuff installed without tears. That Readme file you didn't read I mentioned the readme file earlier (http://go.microsoft.com/fwlink/?LinkId=210711 ). Some interesting things I picked up in there: 2.1.3. Visual Studio 2010 Service Pack 1 installation may fail when a USB drive or other removeable drive is connected 2.1.4. Visual Studio must be restarted after Visual Studio 2010 SP1 tooling for SQL Server Compact (Compact) 4.0 is installed 2.2.1. If Visual Studio 2010 Service Pack 1 is uninstalled, Visual Studio 2010 must be reinstalled to restore certain components 2.2.2. If Visual Studio 2010 Service Pack 1 is uninstalled, Visual Studio 2010 must be reinstalled before SP1 can be installed again 2.4.3.1. Async CTP If you installed the pre-SP1 version of Async CTP but did not uninstall it before you installed Visual Studio 2010 SP1, then your computer will be in a state in which the version of the C# compiler in the .NET Framework does not match the C# compiler in Visual Studio. To resolve this issue: After you install Visual Studio 2010 SP1, reinstall the SP1 version of the Async CTP from here. Hardware acceleration for Visual Studio is disabled on Windows XP Visual Studio 2010 SP1 disables hardware acceleration when running on Windows XP (only on XP). You can turn it back on in the Visual Studio options, under Environment / General, as shown below. See Jason Zander's post titled Performance Troubleshooting Article and VS2010 SP1 Change.

  Read the article

• .NET 4.5 is an in-place replacement for .NET 4.0

  - by Rick Strahl

  With the betas for .NET 4.5 and Visual Studio 11 and Windows 8 shipping many people will be installing .NET 4.5 and hacking away on it. There are a number of great enhancements that are fairly transparent, but it's important to understand what .NET 4.5 actually is in terms of the CLR running on your machine. When .NET 4.5 is installed it effectively replaces .NET 4.0 on the machine. .NET 4.0 gets overwritten by a new version of .NET 4.5 which - according to Microsoft - is supposed to be 100% backwards compatible. While 100% backwards compatible sounds great, we all know that 100% is a hard number to hit, and even the aforementioned blog post at the Microsoft site acknowledges this. But there's so much more than backwards compatibility that makes this awkward at best and confusing at worst. What does ‘Replacement’ mean? When you install .NET 4.5 your .NET 4.0 assemblies in the \Windows\.NET Framework\V4.0.30319 are overwritten with a new set of assemblies. You end up with overwritten assemblies as well as a bunch of new ones (like the new System.Net.Http assemblies for example). The following screen shot demonstrates system.dll on my test machine (left) running .NET 4.5 on the right and my production laptop running stock .NET 4.0 (right):   Clearly they are different files with a difference in file sizes (interesting that the 4.5 version is actually smaller). That’s not all. If you actually query the runtime version when .NET 4.5 is installed with with Environment.Version you still get: 4.0.30319 If you open the properties of System.dll assembly in .NET 4.5 you'll also see: Notice that the file version is also left at 4.0.xxx. There are differences in build numbers: .NET 4.0 shows 261 and the current .NET 4.5 beta build is 17379. I suppose you can use assume a build number greater than 17000 is .NET 4.5, but that's pretty hokey to say the least. There’s no easy or obvious way to tell whether you are running on 4.0 or 4.5 – to the application they appear to be the same runtime version. And that is what Microsoft intends here. .NET 4.5 is intended as an in-place upgrade. Compile to 4.5 run on 4.0 – not quite! You can compile an application for .NET 4.5 and run it on the 4.0 runtime – that is until you hit a new feature that doesn’t exist on 4.0. At which point the app bombs at runtime. Say you write some code that is mostly .NET 4.0, but only has a few of the new features of .NET 4.5 like aync/await buried deep in the bowels of the application where it only fires occasionally. .NET will happily start your application and run everything 4.0 fine, until it hits that 4.5 code – and then crash unceremoniously at runtime. Oh joy! You can .NET 4.0 applications on .NET 4.5 of course and that should work without much fanfare. Different than .NET 3.0/3.5 Note that this in-place replacement is very different from the side by side installs of .NET 2.0 and 3.0/3.5 which all ran on the 2.0 version of the CLR. The two 3.x versions were basically library enhancements on top of the core .NET 2.0 runtime. Both versions ran under the .NET 2.0 runtime which wasn’t changed (other than for security patches and bug fixes) for the whole 3.x cycle. The 4.5 update instead completely replaces the .NET 4.0 runtime and leaves the actual version number set at v4.0.30319. When you build a new project with Visual Studio 2011, you can still target .NET 4.0 or you can target .NET 4.5. But you are in effect referencing the same set of assemblies for both regardless which version you use. What's different is the compiler used to compile and link your code so compiling with .NET 4.0 gives you just the subset of the functionality that is available in .NET 4.0, but when you use the 4.5 compiler you get the full functionality of what’s actually available in the assemblies and extra libraries. It doesn’t look like you will be able to use Visual Studio 2010 to develop .NET 4.5 applications. Good news – Bad news Microsoft is trying hard to experiment with every possible permutation of releasing new versions of the .NET framework apparently. No two updates have been the same. Clearly updating to a full new version of .NET (ie. .NET 2.0, 4.0 and at some point 5.0 runtimes) has its own set of challenges, but doing an in-place update of the runtime and then not even providing a good way to tell which version is installed is pretty whacky even by Microsoft’s standards. Especially given that .NET 4.5 includes a fairly significant update with all the aysnc functionality baked into the runtime. Most of the IO APIs have been updated to support task based async operation which significantly affects many existing APIs. To make things worse .NET 4.5 will be the initial version of .NET that ships with Windows 8 so it will be with us for a long time to come unless Microsoft finally decides to push .NET versions onto Windows machines as part of system upgrades (which currently doesn’t happen). This is the same story we had when Vista launched with .NET 3.0 which was a minor version that quickly was replaced by 3.5 which was more long lived and practical. People had enough problems dealing with the confusing versioning of the 3.x versions which ran on .NET 2.0. I can’t count the amount support calls and questions I’ve fielded because people couldn’t find a .NET 3.5 entry in the IIS version dialog. The same is likely to happen with .NET 4.5. It’s all well and good when we know that .NET 4.5 is an in-place replacement, but administrators and IT folks not intimately familiar with .NET are unlikely to understand this nuance and end up thoroughly confused which version is installed. It’s hard for me to see any upside to an in-place update and I haven’t really seen a good explanation of why this approach was decided on. Sure if the version stays the same existing assembly bindings don’t break so applications can stay running through an update. I suppose this is useful for some component vendors and strongly signed assemblies in corporate environments. But seriously, if you are going to throw .NET 4.5 into the mix, who won’t be recompiling all code and thoroughly test that code to work on .NET 4.5? A recompile requirement doesn’t seem that serious in light of a major version upgrade.  Resources http://blogs.msdn.com/b/dotnet/archive/2011/09/26/compatibility-of-net-framework-4-5.aspx http://www.devproconnections.com/article/net-framework/net-framework-45-versioning-faces-problems-141160© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Using delegates in C# (Part 2)

  - by rajbk

  Part 1 of this post can be read here. We are now about to see the different syntaxes for invoking a delegate and some c# syntactic sugar which allows you to code faster. We have the following console application. 1: public delegate double Operation(double x, double y); 2:  3: public class Program 4: { 5: [STAThread] 6: static void Main(string[] args) 7: { 8: Operation op1 = new Operation(Division); 9: double result = op1.Invoke(10, 5); 10: 11: Console.WriteLine(result); 12: Console.ReadLine(); 13: } 14: 15: static double Division(double x, double y) { 16: return x / y; 17: } 18: } Line 1 defines a delegate type called Operation with input parameters (double x, double y) and a return type of double. On Line 8, we create an instance of this delegate and set the target to be a static method called Division (Line 15) On Line 9, we invoke the delegate (one entry in the invocation list). The program outputs 5 when run. The language provides shortcuts for creating a delegate and invoking it (see line 9 and 11). Line 9 is a syntactical shortcut for creating an instance of the Delegate. The C# compiler will infer on its own what the delegate type is and produces intermediate language that creates a new instance of that delegate. Line 11 uses a a syntactical shortcut for invoking the delegate by removing the Invoke method. The compiler sees the line and generates intermediate language which invokes the delegate. When this code is compiled, the generated IL will look exactly like the IL of the compiled code above. 1: public delegate double Operation(double x, double y); 2:  3: public class Program 4: { 5: [STAThread] 6: static void Main(string[] args) 7: { 8: //shortcut constructor syntax 9: Operation op1 = Division; 10: //shortcut invoke syntax 11: double result = op1(10, 2); 12: 13: Console.WriteLine(result); 14: Console.ReadLine(); 15: } 16: 17: static double Division(double x, double y) { 18: return x / y; 19: } 20: } C# 2.0 introduced Anonymous Methods. Anonymous methods avoid the need to create a separate method that contains the same signature as the delegate type. Instead you write the method body in-line. There is an interesting fact about Anonymous methods and closures which won’t be covered here. Use your favorite search engine ;-)We rewrite our code to use anonymous methods (see line 9): 1: public delegate double Operation(double x, double y); 2:  3: public class Program 4: { 5: [STAThread] 6: static void Main(string[] args) 7: { 8: //Anonymous method 9: Operation op1 = delegate(double x, double y) { 10: return x / y; 11: }; 12: double result = op1(10, 2); 13: 14: Console.WriteLine(result); 15: Console.ReadLine(); 16: } 17: 18: static double Division(double x, double y) { 19: return x / y; 20: } 21: } We could rewrite our delegate to be of a generic type like so (see line 2 and line 9). You will see why soon. 1: //Generic delegate 2: public delegate T Operation<T>(T x, T y); 3:  4: public class Program 5: { 6: [STAThread] 7: static void Main(string[] args) 8: { 9: Operation<double> op1 = delegate(double x, double y) { 10: return x / y; 11: }; 12: double result = op1(10, 2); 13: 14: Console.WriteLine(result); 15: Console.ReadLine(); 16: } 17: 18: static double Division(double x, double y) { 19: return x / y; 20: } 21: } The .NET 3.5 framework introduced a whole set of predefined delegates for us including public delegate TResult Func<T1, T2, TResult>(T1 arg1, T2 arg2); Our code can be modified to use this delegate instead of the one we declared. Our delegate declaration has been removed and line 7 has been changed to use the Func delegate type. 1: public class Program 2: { 3: [STAThread] 4: static void Main(string[] args) 5: { 6: //Func is a delegate defined in the .NET 3.5 framework 7: Func<double, double, double> op1 = delegate (double x, double y) { 8: return x / y; 9: }; 10: double result = op1(10, 2); 11: 12: Console.WriteLine(result); 13: Console.ReadLine(); 14: } 15: 16: static double Division(double x, double y) { 17: return x / y; 18: } 19: } .NET 3.5 also introduced lambda expressions. A lambda expression is an anonymous function that can contain expressions and statements, and can be used to create delegates or expression tree types. We change our code to use lambda expressions. 1: public class Program 2: { 3: [STAThread] 4: static void Main(string[] args) 5: { 6: //lambda expression 7: Func<double, double, double> op1 = (x, y) => x / y; 8: double result = op1(10, 2); 9: 10: Console.WriteLine(result); 11: Console.ReadLine(); 12: } 13: 14: static double Division(double x, double y) { 15: return x / y; 16: } 17: } C# 3.0 introduced the keyword var (implicitly typed local variable) where the type of the variable is inferred based on the type of the associated initializer expression. We can rewrite our code to use var as shown below (line 7).  The implicitly typed local variable op1 is inferred to be a delegate of type Func<double, double, double> at compile time. 1: public class Program 2: { 3: [STAThread] 4: static void Main(string[] args) 5: { 6: //implicitly typed local variable 7: var op1 = (x, y) => x / y; 8: double result = op1(10, 2); 9: 10: Console.WriteLine(result); 11: Console.ReadLine(); 12: } 13: 14: static double Division(double x, double y) { 15: return x / y; 16: } 17: } You have seen how we can write code in fewer lines by using a combination of the Func delegate type, implicitly typed local variables and lambda expressions.

  Read the article

• Documenting C# Library using GhostDoc and SandCastle

  - by sreejukg

  Documentation is an essential part of any IT project, especially when you are creating reusable components that will be used by other developers (such as class libraries). Without documentation re-using a class library is almost impossible. Just think of coding .net applications without MSDN documentation (Ooops I can’t think of it). Normally developers, who know the bits and pieces of their classes, see this as a boring work to write details again to generate the documentation. Also the amount of work to make this and manage it changes made the process of manual creation of Documentation impossible or tedious. So what is the effective solution? Let me divide this into two steps 1. Generate comments for your code while you are writing the code. 2. Create documentation file using these comments. Now I am going to examine these processes. Step 1: Generate XML Comments automatically Most of the developers write comments for their code. The best thing is that the comments will be entered during the development process. Additionally comments give a good reference to the code, make your code more manageable/readable. Later these comments can be converted into documentation, along with your source code by identifying properties and methods I found an add-in for visual studio, GhostDoc that automatically generates XML documentation comments for C#. The add-in is available in Visual Studio Gallery at MSDN. You can download this from the url http://visualstudiogallery.msdn.microsoft.com/en-us/46A20578-F0D5-4B1E-B55D-F001A6345748. I downloaded the free version from the above url. The free version suits my requirement. There is a professional version (you need to pay some $ for this) available that gives you some more features. I found the free version itself suits my requirements. The installation process is straight forward. A couple of clicks will do the work for you. The best thing with GhostDoc is that it supports multiple versions of visual studio such as 2005, 2008 and 2010. After Installing GhostDoc, when you start Visual studio, the GhostDoc configuration dialog will appear. The first screen asks you to assign a hot key, pressing this hotkey will enter the comment to your code file with the necessary structure required by GhostDoc. Click Assign to go to the next step where you configure the rules for generating the documentation from the code file. Click Create to start creating the rules. Click finish button to close this wizard. Now you performed the necessary configuration required by GhostDoc. Now In Visual Studio tools menu you can find the GhostDoc that gives you some options. Now let us examine how GhostDoc generate comments for a method. I have write the below code in my code behind file. public Char GetChar(string str, int pos) { return str[pos]; } Now I need to generate the comments for this function. Select the function and enter the hot key assigned during the configuration. GhostDoc will generate the comments as follows. /// <summary> /// Gets the char. /// </summary> /// <param name="str">The STR.</param> /// <param name="pos">The pos.</param> /// <returns></returns> public Char GetChar(string str, int pos) { return str[pos]; } So this is a very handy tool that helps developers writing comments easily. You can generate the xml documentation file separately while compiling the project. This will be done by the C# compiler. You can enable the xml documentation creation option (checkbox) under Project properties -> Build tab. Now when you compile, the xml file will created under the bin folder. Step 2: Generate the documentation from the XML file Now you have generated the xml file documentation. Sandcastle is the tool from Microsoft that generates MSDN style documentation from the compiler produced XML file. The project is available in codeplex http://sandcastle.codeplex.com/. Download and install Sandcastle to your computer. Sandcastle is a command line tool that doesn’t have a rich GUI. If you want to automate the documentation generation, definitely you will be using the command line tools. Since I want to generate the documentation from the xml file generated in the previous step, I was expecting a GUI where I can see the options. There is a GUI available for Sandcastle called Sandcastle Help File Builder. See the link to the project in codeplex. http://www.codeplex.com/wikipage?ProjectName=SHFB. You need to install Sandcastle and then the Sandcastle Help file builder. From here I assume that you have installed both sandcastle and Sandcastle help file builder successfully. Once you installed the help file builder, it will be available in your all programs list. Click on the Sandcastle Help File Builder GUI, will launch application. First you need to create a project. Click on File -> New project The New project dialog will appear. Choose a folder to store your project file and give a name for your documentation project. Click the save button. Now you will see your project properties. Now from the Project explorer, right click on the Documentation Sources, Click on the Add Documentation Source link. A documentation source is a file such as an assembly or a Visual Studio solution or project from which information will be extracted to produce API documentation. From the Add Documentation source dialog, I have selected the XML file generated by my project. Once you add the xml file to the project, you will see the dll file automatically added by the help file builder. Now click on the build button. Now the application will generate the help file. The Build window gives to the result of each steps. Once the process completed successfully, you will have the following output in the build window. Now navigate to your Help Project (I have selected the folder My Documents\Documentation), inside help folder, you can find the chm file. Open the chm file will give you MSDN like documentation. Documentation is an important part of development life cycle. Sandcastle with GhostDoc make this process easier so that developers can implement the documentation in the projects with simple to use steps.

  Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >