Search Results

Search found 6126 results on 246 pages for 'keyboard hook'.

Page 128/246 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

  • What can cause a kernel hang on redhat 4?

    - by Ivan Buttinoni
    I've to solve a nasty problem on a ten machine "cluster": randomly one of these machine hang during an hard computation, sometime still ping sometime not. The problem was described me at the phone, I've still no touch/see these machine, so I can't be more precise. It seem there's no (real) keyboard or monitor linked to them, so I haven't nothing about keyboard led or messages on monitor. Don't worry, what I really need is some suggestion where to search the problem, some suggestions on what can cause a kernel hang on a working machine. I also see this post, but seem same need on a different situation. My ideas since now: - HW problem (ram, cpu, fan etc.) - bad autofs configuration - bad nfs(?) configuration - presence of a trojan/hacker/etc - /dev/"swap" linked to /dev/zero - kernel out of memory(??) - kernel bugged In other words I try to imagine what kind of envent can occour that can crash the kernel insted of the application that generate the event. What hang have YOU experienced before? Write it to me! TIA

    Read the article

  • System occasionally hangs boot process with SLES 11

    - by ThaMe90
    I have several (new) systems on which I had to install SLES11 on. However, after a few (though not every) reboots, the system hangs during the boot sequence. It will only continue after I physically press a key on the keyboard. From what I've found in the dmesg log from a failed boot is the following: [ 22.170276] sd 0:0:0:0: [sda] Mode Sense: b7 00 00 08 [ 22.171155] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.182760] sda: sda1 sda2 sda3 [ 22.383424] sd 0:0:0:0: [sda] Attached SCSI disk [ 22.545372] PM: Marking nosave pages: 000000000009a000 - 0000000000100000 [ 22.545377] PM: Marking nosave pages: 00000000bf780000 - 0000000100000000 [ 22.546217] PM: Basic memory bitmaps created [ 22.590380] PM: Basic memory bitmaps freed [ 22.596284] PM: Starting manual resume from disk [ 22.602319] PM: Resume from partition 8:1 [ 22.602321] PM: Checking hibernation image. [ 22.602479] PM: Error -22 checking image file [ 22.602481] PM: Resume from disk failed. [ 22.718727] kjournald starting. Commit interval 15 seconds [ 22.718960] EXT3-fs (sda3): using internal journal [ 22.718964] EXT3-fs (sda3): mounted filesystem with ordered data mode [ 1555.644404] udevd version 128 started [ 1555.697664] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1555.707961] ACPI: Power Button [PWRB] I've looked around the internet for the PM: Resume from disk failed. message, but this seems to only be important when restoring the system after a hybernate, i.e. restore from the hdd. But this is not my situation. I only get this after a reboot, as I said before. The timestamp [ 1555.xxxxxx] is only the result of me pressing a key on the keyboard. Any suggestions on how to proceed? As I am getting stuck on this issue.

    Read the article

  • Permanent fix for unicode characters not displaying correctly (as boxes)

    - by Chase
    Please read this entire message before replying. First I know how to fix the issue on a temporary basis. I am looking for a permanent fix. I work with foreign language files a lot. Unfortunately sometimes all the unicode characters in windows explorer, notepad, and other places (as rendered by windows, probably GDI) do not display correctly. That is they display as square blocks, where as they had just been displaying correctly. There are countless methods to temporarily correct the issue. But again, I want a way to permanently resolve the issue. What I have tried: The silly "Hide fonts based on language settings". This setting only applies to what fonts you see in the fonts folder and font dropdowns. It doesn't disable foreign fonts (doesn't work, or if it does, it is temporary). Deleting the font cache file and rebooting (works.. usually, temporary solution). Changing my locale and then back (sometimes works, temporary solution). Rebooting my PC and getting lucky (50-50 chance, temporary solution). Changing my keyboard input/adding foreign keyboard (temporary solution that only seems to work once). Reinstalling windows (temporary solution, sometimes lasts a few months though, I have done this 7 times across 3 computers) What I have not tried: Buying Windows Ultimate and installing the interface packs. This is not a solution. I can't read Japanese/Chinese and I do not want my interface in those languages. What I will not do: Switch to a different brand operating system (unix, linux, mac os x) Switch to an older version of windows (Windows Vista, XP, 2000, etc). So can anyone recommend a permanent fix for the problem?

    Read the article

  • Mac - KeyRemap4MacBook - Custom XML

    - by DjRikyx
    I hope someone of you know this powerfull Pref Panel to remap the keyboard.. Since i'm using a PC Keyboard, i wanted to make Screenshot a bit easy to do.. I managed to get working: -Command+Shift+3 to Stamp (full screen screenshot) -Command+Shift+4 to Control+Stamp (Selection Cursor Screenshot) Now i want to remap Shift+Stamp to Command+Shift+4+Space to get Windows Screenshot.. i tried but nothing was working.. Here is my current XML.. i only need to add the last remap! <?xml version="1.0"?> <root> <item> <name>Custom PC Style Screenshot</name> <appendix>Command+Shift_L+4+Space to Shift+F13</appendix> <appendix>Command+Shift_L+4 to Control+F13</appendix> <appendix>Command+Shift_L+3 to F13</appendix> <identifier>private.custom_pc_style_screenshot</identifier> <autogen></autogen> <autogen>--KeyToKey-- KeyCode::F13, VK_CONTROL, KeyCode::KEY_4, ModifierFlag::COMMAND_L | ModifierFlag::SHIFT_L</autogen> <autogen>--KeyToKey-- KeyCode::F13, KeyCode::KEY_3, ModifierFlag::COMMAND_L | ModifierFlag::SHIFT_L</autogen> Hope someone of you can help me out! Thank you

    Read the article

  • Having trouble with a workaround, for booting from a usb stick, using grub and a minimal linux kernel to load usb drivers

    - by s hanley
    I'm trying to boot from a usb stick. I formatted it to fat32, and later to ext2, and installed dsl on it using unetbootin, and later the usb install guide on dsl wiki (http://www.damnsmalllinux.org/wiki/index.php/Install_to_USB_From_within_Linux). The bios doesn't have a setting for booting from usb. Grub doesn't "see" the usb drive when I use the root and find commands, explained in (http://www.damnsmalllinux.org/wiki/index.php/USB_Booting). This happens even when I set boot from floppy at the top of the boot order. However, my usb keyboard is recognised by the bios and by grub. How can it recognise the keyboard but not the usb drive? Also, the usb led does flash even before grub starts up, so surely something must be happening usb-wise? I am now following an ubuntu guide to booting from a USB stick, using a hdd-based, minimal linux kernel to supply the usb drivers. But I'm having difficulty adapting it to other OSes (slax/dsl/aptosid). I believe I have to alter the initrd.gz file to include usb drivers and then copy that file along with vmlinuz to a partition on my hdd. But, what's the grub command for the kernel line supposed to look like? From the ubuntu example it's: title USB FLASH DRIVE root (hd0,6) kernel /boot/usb-boot/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper noprompt cdrom-detect/try-usb=true persistent initrd /boot/usb-boot/initrd.lz boot Should mine just be: title USB FLASH DRIVE root (hd0,6) kernel /boot/usb-boot/vmlinuz cdrom-detect/try-usb=true initrd /boot/usb-boot/initrd.lz boot

    Read the article

  • Ubuntu 10.10 - disaster - what other linux for beginner?

    - by A-ha
    Guys, I've tried to install ubuntu (desktop and notebook ed) on my laptop and unortunately I have to say that as despite the fact that installation process supposed to be easy I couldn't finish installation of this system - didn't detect my keyboard or rather lost my keyboard as soon as I tried to switch on/off pad on my laptop. After I've discovered that, I started all over again (this time without touching my laptop's pad during installation) and yes, eventually it get to the end of installation. Unfortunately, when I've tried to switch my pad (sometimes I just do not want to use a mouse) the whole system froze. So I had to restart it with the power button and this time I didn't touch pad at all, plugged in mouse and tried to rearrange taskbars according to my liking (all taskbars on the top side of the screen and auto-hide on) and I gave up. It is so unfinished that I just can't be bothered to use it. I would like to have one linux system on my machine so I started googling and most of the links are to either ubuntu (which I just do not want to touch for now) and suse or commercial versions of linux. I do not really mind paying for something (and having experience with ubuntu I'd rather pay and have something pro then get it free and discover that it's unusable). So could someone please provide short list of linux distros which would be appropriate for a beginner, and I don't mind paying for it, I just want it to be a professional product.

    Read the article

  • Serious 64-bit laptop

    - by Daniel Gehriger
    For the past couple of years, I have been using an IBM Thinkpad T60p for daily work (software development, desktop & embedded). I am extremely satisfied with this machine, due to its robustness. It also has a few features I depend on: a high resolution display: 15.0" TFT FlexView display with 1600x1200 (UXGA); excellent keyboard; decent graphics and CPU performance. Some of the software I develop benefits from larger amounts of RAM, and 3GB (Windows 7 32-bit) or 4GB (Windows 7 64-bit on T60p) are no longer sufficient. My customers run desktop computers with 20GB and more, and I need to have at least 8GB to at least be able to run reasonable test cases. So I'm shopping around for a new laptop, but I'm struggling to find anything that matches my requirements: must run Windows 7 64-bit Pro or higher; must support at least 8GB of RAM (more is better) high screen resolution! While I prefer 4:3 I can live with wide screen. But I really hope to find something with a vertical screen resolution similar to what I have now... portable, so < 16" but = 14" I realize that FlexView isn't available anymore, but I'd like to avoid a glossy screen if possible. decent (not more) graphics performance, ideally hybrid (I'm doing a lot of CAD, never games). good keyboard reasonable CPU -- but I'm still fine with my current Core 2 Duo, so that shouldn't be too complicated. The T60p fits all those requirements, except the 8GB of RAM. Can you help me find a current notebook that would match most of them? I don't mind changing brand. Thanks!

    Read the article

  • What to do about old MacBook

    - by John
    I have a White MacBook version 10.5.8. I accidentally dropped it and about an inch of the most right side of the screen is blacked out. I can't see the clock and Trash Can because of this. I checked how much it would cost to repair, and the cost of repairing is a flat rate of $300. I thought that was kind of expensive, like a third of the cost of the MacBook itself. accidentally dropping a notebook is something that would happen sooner or later, so I think getting a Lenovo is the best. I ended up getting a MacBook pro 15 inch, but do you think it's worth the money to fix my old MacBook? I even saw some used MacBooks available on Ebay for about $400. Anyways I don't know what to do with it. I do like its screen and keyboard better than the MacBook Pro ones, because the screen is less glare-y and the keyboard is more crisp and fun to type on, and its more wieldy when I'm using it while lying down.

    Read the article

  • Start Chrome by command line, but adding some arguments to make it login into your Google account automatically

    - by jim
    Is there a way to start Chrome calling it from the command line (using Linux), but providing it some argument to make it login into some Google account automatically? I'm looking for something like google-chrome -account foo -pass bar that I can easily put in a bash script later. A little background: I have a laptop connected to my TV, which is currently using just a mouse for user interaction. There's no google account logged in by default, and that's the way I want to keep it, so my kids can't come across videos and pictures in google and youtube that they are not supposed to see (e.g.: adult content, or anything marked as not appropriate for kids by the google's safe search filters). The bad thing about this is that there are some music videos in youtube that requires you to be logged in to see, usually those we (the adults) used to sing when playing karaoke... as the only input available is a mouse, I'm looking for a way to start with my google account without having to type the whole thing usin the on-screen keyboard. You may think "Why you can't use the keyboard, if the laptop is right there?". Well, it's in a kind of uncomfortable position - too high for me without a chair or something, as it's right above the furniture in where the TV is located. Is there a way to make this scriptable? If not, do you know any other workaround? Note: using the remember me after logging off or alike options are discarded, as the safe-search chrome version must be always the default version to run.

    Read the article

  • Kickstarting an Ubuntu Server 10.04 installation (DHCP fails)

    - by William
    I'm trying to automate the network installation of Ubuntu 10.04 LTS with an anaconda kickstart and everything seems to running except for the initial DHCP autoconfiguration. The installer attempts to configure the install via DHCP but fails on its first attempt. This brings me to a prompt where I can retry DHCP and it seems to always work on the second attempt. My issue is that this is not really automated if I have to hit retry for DHCP. Is there something I can add to the kickstart file so that it will automatically retry or better yet not fail the first time? Thanks. Kickstart: # System language lang en_US # Language modules to install langsupport en_US # System keyboard keyboard us # System mouse mouse # System timezone timezone America/New_York # Root password rootpw --iscrypted $1$unrsWyF2$B0W.k2h1roBSSFmUDsW0r/ # Initial user user --disabled # Reboot after installation reboot # Use text mode install text # Install OS instead of upgrade install # Use Web installation url --url=http://10.16.0.1/cobbler/ks_mirror/ubuntu-10.04-x86_64/ # System bootloader configuration bootloader --location=mbr # Clear the Master Boot Record zerombr yes # Partition clearing information clearpart --all --initlabel # Disk partitioning information part swap --size 512 part / --fstype ext3 --size 1 --grow # System authorization infomation auth --useshadow --enablemd5 %include /tmp/pre_install_ubuntu_network_config # Always install the server kernel. preseed --owner d-i base-installer/kernel/override-image string linux-server # Install the Ubuntu Server seed. preseed --owner tasksel tasksel/force-tasks string server # Firewall configuration firewall --disabled # Do not configure the X Window System skipx %pre wget "http://10.16.0.1/cblr/svc/op/trig/mode/pre/system/Test-D" -O /dev/null # Network information # Start pre_install_network_config generated code # Start of code to match cobbler system interfaces to physical interfaces by their mac addresses # Start eth0 # Configuring eth0 (00:1A:64:36:B1:C8) if ip -o link show | grep -i 00:1A:64:36:B1:C8 then IFNAME=$(ip -o link show | grep -i 00:1A:64:36:B1:C8 | cut -d" " -f2 | tr -d :) echo "network --device=$IFNAME --bootproto=dhcp" >> /tmp/pre_install_ubuntu_network_config fi # End pre_install_network_config generated code %packages openssh-server

    Read the article

  • Standing and sitting while using a computer at work

    - by Adam Batkin
    I would like to be able to comfortably switch between sitting and standing while at work (I'm a software developer, so I spend most of my day in front of a computer). For the past couple of months I have been using a large elevated stand that sits on my desk (designed expressly for this purpose) containing my keyboard and mouse, and my monitors have been raised as high as possible and aimed upwards. So I can stand all day and I'm pretty comfortable (my right wrist may be at too much of an angle when it's on my mouse, but that's a separate issue). The only problem is that sometimes I want to be able to sit. I can easily place my keyboard and mouse back down under the elevated stand, but I have to look up pretty steeply and that is uncomfortable and makes it difficult to see the screens since they are tilted upwards. My monitor mounts are difficult to adjust quickly/easily, so I can't just re-aim them. I would of course love one of those hydraulic standing/sitting desks (cost isn't the problem). But I'm in a row of "trader-style" desks where it's basically a very long surface with people sitting at 6-foot intervals. What type of equipment do you recommend? I suppose the best thing would be some sort of monitor stand (it must be able to hold 2-3 LCDs) that can easily be lowered and raised. But any other suggestions are also welcome.

    Read the article

  • How to find the IP Address of a vm running on VMware (or other methods of using VM)

    - by sixtyfootersdude
    I am running VMware Workstation on a Linux box. When I power on a centOS (Linux) virtual machine I cannot get mouse or keyboard control of the machine. I suspect that it has something to do with the error message: You do not have VMware Tools installed in this guest. Chose "Install VMware Tools" from the VM menu. If I click on that menu option it inserts a virtual cd with drivers etc. This does not help me since I don't have keyboard or mouse control over the machine. I was thinking that if I could figure out the IP address or hostname I could use any number of protocols to get into the machine (SSH comes to mind). How can I get the IP address or hostname of this machine? Note: I did not create this machine. A coworker created it who is no longer with the company. Would save me a lot of time if I could get into the machine. I have login credentials so that won't be a problem.

    Read the article

  • How can I disable 'natural breaks' in Workrave?

    - by Pixelastic
    I've just discovered Workrave, and was trying to use it along the Pomodoro technique (5mn break every 25mn). But the concept of 'natural breaks' of Workrave seems to interfere with what I'm trying to achieve. Workrave tries to guess that I'm doing a natural break if I stop using my mouse and keyboard for longer than 5s. It then stops the work timer, and start counting time as if I was doing my break. Here is a typical example : I've configured a 5mn rest break every 25mn. I start working. 10mn later, I receive a phone call, or start talking with a colleague, or any work-related action that do not need either keyboard nor mouse. Workrave then stops counting my time as work time, and starts its rest timer. If my phone call is shorter than 5mn, then Workrave will resume its timer where it stopped it. Meaning that my time on the phone is not counted as work time, and so my break time is pushed a few minutes later than it should be. Even worse, if my phone call is longer than 5mn, then Workrave count it as a complete rest break, and when I'll resume working, it will restart its timer completly. I'm looking for either a way to disable the natural breaks, or increase the 'inactivity time' from 5s to maybe ~1mn. Or maybe an other angle to look at the natural breaks that might work with the Pomodoro technique (forced 5mn breaks every 25mn). I'm using Ubuntu 11.10.

    Read the article

  • Good support to multiple desktops AND multiple monitors in Linux (Ubuntu)?

    - by Somebody still uses you MS-DOS
    I'm starting to have A LOT of opened windows in my machine. Sometimes within a project, I have e-mail/task management/personal e-mail/twitter, and a lot of different opened applications/terminal in my Linux environment. Nowadays I have 4 worspaces: Corporate management (e-mail) and corporate messenger; Work (Documents, Requisites) Dev (Development, All gVim windows, terminal and Firefox for development) Personal (Personal stuff: personal e-mail, delicious, twitter and so on) Sometimes it would be interesting to have different workspaces to projects instead of this configuration I have nowadays that are classes of work (bad name, I know, but I think you got the idea). I'm starting to think about using two monitors: one with Corporate Management, Work and Personal. The second monitor is only the development state: each workspace here is about a project being worked on instead of groups of works like before. A workspace may be implementing different classes for example. My question is: I just want to change to a second monitor using the mouse. I want to still be able to change workspaces in the same monitor using keyboard shortcuts. The keyboard shortcuts wouldn't change monitors, just worskpaces on the same monitor. Does Linux (Ubuntu 10.04 Lucid Lynx) support this envisioned setup? If so, how?

    Read the article

  • Implementing union of Set using basic java array

    - by lupindeterd
    Note: This is an assignment. Hi, Continuing with my Set implementation using Java basic array, I'm now struggling with the 3 to last function namely the union. import java.io.*; class Set { private int numberOfElements = 0; private String[] setElements = new String[5]; private int maxNumberOfElements = 5; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { int numberOfElements = numberOfE; String[] setElements = new String[setE]; int maxNumberOfElements = maxNumberOfE; } // Helper method to shorten/remove element of array since we're using basic array instead of ArrayList or HashSet from collection interface :( static String[] removeAt(int k, String[] arr) { final int L = arr.length; String[] ret = new String[L - 1]; System.arraycopy(arr, 0, ret, 0, k); System.arraycopy(arr, k + 1, ret, k, L - k - 1); return ret; } int findElement(String element) { int retval = 0; for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(element) ) { return retval = i; } retval = -1; } return retval; } void add(String newValue) { int elem = findElement(newValue); if( numberOfElements < maxNumberOfElements && elem == -1 ) { setElements[numberOfElements] = newValue; numberOfElements++; } } int getLength() { if ( setElements != null ) { return setElements.length; } else { return 0; } } String[] emptySet() { setElements = new String[0]; return setElements; } Boolean isFull() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == maxNumberOfElements ){ return True; } else { return False; } } Boolean isEmpty() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == 0 ) { return True; } else { return False; } } void remove(String newValue) { for ( int i = 0; i < setElements.length; i++) { if ( setElements[i].equals(newValue) ) { setElements = removeAt(i,setElements); } } } int isAMember(String element) { int retval = -1; for ( int i = 0; i < setElements.length; i++ ) { if (setElements[i] != null && setElements[i].equals(element)) { return retval = i; } } return retval; } void printSet() { for ( int i = 0; i < setElements.length; i++) { System.out.println("Member elements on index: "+ i +" " + setElements[i]); } } String[] getMember() { String[] tempArray = new String[setElements.length]; for ( int i = 0; i < setElements.length; i++) { if(setElements[i] != null) { tempArray[i] = setElements[i]; } } return tempArray; } Set union(Set x, Set y) { String[] newtemparray = new String[x.getLength]; newtemparray = x.getMember; return x; } } // This is the SetDemo class that will make use of our Set class class SetDemo { public static void main(String[] args) { //get input from keyboard BufferedReader keyboard; InputStreamReader reader; String temp = ""; reader = new InputStreamReader(System.in); keyboard = new BufferedReader(reader); try { System.out.println("Enter string element to be added" ); temp = keyboard.readLine( ); System.out.println("You entered " + temp ); } catch (IOException IOerr) { System.out.println("There was an error during input"); } /* ************************************************************************** * Test cases for our new created Set class. * ************************************************************************** */ Set setA = new Set(1,10,10); setA.add(temp); setA.add("b"); setA.add("b"); setA.add("hello"); setA.add("world"); setA.add("six"); setA.add("seven"); setA.add("b"); int size = setA.getLength(); System.out.println("Set size is: " + size ); Boolean isempty = setA.isEmpty(); System.out.println("Set is empty? " + isempty ); int ismember = setA.isAMember("sixb"); System.out.println("Element six is member of setA? " + ismember ); Boolean output = setA.isFull(); System.out.println("Set is full? " + output ); setA.printSet(); int index = setA.findElement("world"); System.out.println("Element b located on index: " + index ); setA.remove("b"); setA.emptySet(); int resize = setA.getLength(); System.out.println("Set size is: " + resize ); setA.printSet(); Set setB = new Set(0,10,10); Set SetA = setA.union(setB,setA); } } Ok the method in question will be the implementation of union. As such this: Set union(Set x, Set y) { String[] newtemparray = new String[x.getLength]; newtemparray = x.getMember; return x; } I got this error: symbol : variable getLength location: class Set String[] newtemparray = new String[x.getLength]; ^ d:\javaprojects\Set.java:122: cannot find symbol symbol : variable getMember location: class Set newtemparray = x.getMember; ^ 2 errors My approach for union would be: *) create temporary array of string with size of the object x length. *) store object x members to temporary array by looping the object and calling the getMember *) loop object y members and check if element exist against temporary array. *) discard if it exist/add if it is not there *) return obj x with the union array. thanks, lupin

    Read the article

  • Java constructor and modify the object properties at runtime

    - by lupin
    Note: This is an assignment Hi, I have the following class/constructor. import java.io.*; class Set { public int numberOfElements = 0; public String[] setElements = new String[5]; public int maxNumberOfElements = 5; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { int numberOfElements = numberOfE; String[] setElements = new String[setE]; int maxNumberOfElements = maxNumberOfE; } // Helper method to shorten/remove element of array since we're using basic array instead of ArrayList or HashSet from collection interface :( static String[] removeAt(int k, String[] arr) { final int L = arr.length; String[] ret = new String[L - 1]; System.arraycopy(arr, 0, ret, 0, k); System.arraycopy(arr, k + 1, ret, k, L - k - 1); return ret; } int findElement(String element) { int retval = 0; for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(element) ) { return retval = i; } retval = -1; } return retval; } void add(String newValue) { int elem = findElement(newValue); if( numberOfElements < maxNumberOfElements && elem == -1 ) { setElements[numberOfElements] = newValue; numberOfElements++; } } int getLength() { if ( setElements != null ) { return setElements.length; } else { return 0; } } String[] emptySet() { setElements = new String[0]; return setElements; } Boolean isFull() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == maxNumberOfElements ){ return True; } else { return False; } } Boolean isEmpty() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == 0 ) { return True; } else { return False; } } void remove(String newValue) { for ( int i = 0; i < setElements.length; i++) { if ( setElements[i].equals(newValue) ) { setElements = removeAt(i,setElements); } } } int isAMember(String element) { int retval = -1; for ( int i = 0; i < setElements.length; i++ ) { if (setElements[i] != null && setElements[i].equals(element)) { return retval = i; } } return retval; } void printSet() { for ( int i = 0; i < setElements.length; i++) { System.out.println("Member elements on index: "+ i +" " + setElements[i]); } } String[] getMember() { String[] tempArray = new String[setElements.length]; for ( int i = 0; i < setElements.length; i++) { if(setElements[i] != null) { tempArray[i] = setElements[i]; } } return tempArray; } Set union(Set x, Set y) { String[] newXtemparray = new String[x.getLength()]; String[] newYtemparray = new String[y.getLength()]; Set temp = new Set(1,20,20); newXtemparray = x.getMember(); newYtemparray = x.getMember(); for(int i = 0; i < newXtemparray.length; i++) { temp.add(newYtemparray[i]); } for(int j = 0; j < newYtemparray.length; j++) { temp.add(newYtemparray[j]); } return temp; } } // This is the SetDemo class that will make use of our Set class class SetDemo { public static void main(String[] args) { //get input from keyboard BufferedReader keyboard; InputStreamReader reader; String temp = ""; reader = new InputStreamReader(System.in); keyboard = new BufferedReader(reader); try { System.out.println("Enter string element to be added" ); temp = keyboard.readLine( ); System.out.println("You entered " + temp ); } catch (IOException IOerr) { System.out.println("There was an error during input"); } /* ************************************************************************** * Test cases for our new created Set class. * ************************************************************************** */ Set setA = new Set(1,10,10); setA.add(temp); setA.add("b"); setA.add("b"); setA.add("hello"); setA.add("world"); setA.add("six"); setA.add("seven"); setA.add("b"); int size = setA.getLength(); System.out.println("Set size is: " + size ); Boolean isempty = setA.isEmpty(); System.out.println("Set is empty? " + isempty ); int ismember = setA.isAMember("sixb"); System.out.println("Element six is member of setA? " + ismember ); Boolean output = setA.isFull(); System.out.println("Set is full? " + output ); setA.printSet(); int index = setA.findElement("world"); System.out.println("Element b located on index: " + index ); setA.remove("b"); setA.emptySet(); int resize = setA.getLength(); System.out.println("Set size is: " + resize ); setA.printSet(); Set setB = new Set(0,10,10); Set SetA = setA.union(setB,setA); SetA.printSet(); } } I have two question here, why I when I change the class property declaration to: class Set { public int numberOfElements; public String[] setElements; public int maxNumberOfElements; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { int numberOfElements = numberOfE; String[] setElements = new String[setE]; int maxNumberOfElements = maxNumberOfE; } I got this error: \ javaprojects>java SetDemo Enter string element to be added a You entered a Exception in thread "main" java.lang.NullPointerException at Set.findElement(Set.java:30) at Set.add(Set.java:43) at SetDemo.main(Set.java:169) Second, on the union method, why the result of SetA.printSet still printing null, isn't it getting back the return value from union method? Thanks in advance for any explaination. lupin

    Read the article

  • Returning new object, overwrite the existing one in Java

    - by lupin
    Note: This is an assignment. Hi, Ok I have this method that will create a supposedly union of 2 sets. i mport java.io.*; class Set { public int numberOfElements; public String[] setElements; public int maxNumberOfElements; // constructor for our Set class public Set(int numberOfE, int setE, int maxNumberOfE) { this.numberOfElements = numberOfE; this.setElements = new String[setE]; this.maxNumberOfElements = maxNumberOfE; } // Helper method to shorten/remove element of array since we're using basic array instead of ArrayList or HashSet from collection interface :( static String[] removeAt(int k, String[] arr) { final int L = arr.length; String[] ret = new String[L - 1]; System.arraycopy(arr, 0, ret, 0, k); System.arraycopy(arr, k + 1, ret, k, L - k - 1); return ret; } int findElement(String element) { int retval = 0; for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(element) ) { return retval = i; } retval = -1; } return retval; } void add(String newValue) { int elem = findElement(newValue); if( numberOfElements < maxNumberOfElements && elem == -1 ) { setElements[numberOfElements] = newValue; numberOfElements++; } } int getLength() { if ( setElements != null ) { return setElements.length; } else { return 0; } } String[] emptySet() { setElements = new String[0]; return setElements; } Boolean isFull() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == maxNumberOfElements ){ return True; } else { return False; } } Boolean isEmpty() { Boolean True = new Boolean(true); Boolean False = new Boolean(false); if ( setElements.length == 0 ) { return True; } else { return False; } } void remove(String newValue) { for ( int i = 0; i < setElements.length; i++) { if ( setElements[i] != null && setElements[i].equals(newValue) ) { setElements = removeAt(i,setElements); } } } int isAMember(String element) { int retval = -1; for ( int i = 0; i < setElements.length; i++ ) { if (setElements[i] != null && setElements[i].equals(element)) { return retval = i; } } return retval; } void printSet() { for ( int i = 0; i < setElements.length; i++) { if (setElements[i] != null) { System.out.println("Member elements on index: "+ i +" " + setElements[i]); } } } String[] getMember() { String[] tempArray = new String[setElements.length]; for ( int i = 0; i < setElements.length; i++) { if(setElements[i] != null) { tempArray[i] = setElements[i]; } } return tempArray; } Set union(Set x, Set y) { String[] newXtemparray = new String[x.getLength()]; String[] newYtemparray = new String[y.getLength()]; int len = newYtemparray.length + newXtemparray.length; Set temp = new Set(0,len,len); newXtemparray = x.getMember(); newYtemparray = x.getMember(); for(int i = 0; i < newYtemparray.length; i++) { temp.add(newYtemparray[i]); } for(int j = 0; j < newXtemparray.length; j++) { temp.add(newXtemparray[j]); } return temp; } Set difference(Set x, Set y) { String[] newXtemparray = new String[x.getLength()]; String[] newYtemparray = new String[y.getLength()]; int len = newYtemparray.length + newXtemparray.length; Set temp = new Set(0,len,len); newXtemparray = x.getMember(); newYtemparray = x.getMember(); for(int i = 0; i < newXtemparray.length; i++) { temp.add(newYtemparray[i]); } for(int j = 0; j < newYtemparray.length; j++) { int retval = temp.findElement(newYtemparray[j]); if( retval != -1 ) { temp.remove(newYtemparray[j]); } } return temp; } } // This is the SetDemo class that will make use of our Set class class SetDemo { public static void main(String[] args) { //get input from keyboard BufferedReader keyboard; InputStreamReader reader; String temp = ""; reader = new InputStreamReader(System.in); keyboard = new BufferedReader(reader); try { System.out.println("Enter string element to be added" ); temp = keyboard.readLine( ); System.out.println("You entered " + temp ); } catch (IOException IOerr) { System.out.println("There was an error during input"); } /* ************************************************************************** * Test cases for our new created Set class. * ************************************************************************** */ Set setA = new Set(0,10,10); setA.add(temp); setA.add("b"); setA.add("b"); setA.add("hello"); setA.add("world"); setA.add("six"); setA.add("seven"); setA.add("b"); int size = setA.getLength(); System.out.println("Set size is: " + size ); Boolean isempty = setA.isEmpty(); System.out.println("Set is empty? " + isempty ); int ismember = setA.isAMember("sixb"); System.out.println("Element sixb is member of setA? " + ismember ); Boolean output = setA.isFull(); System.out.println("Set is full? " + output ); //setA.printSet(); int index = setA.findElement("world"); System.out.println("Element b located on index: " + index ); setA.remove("b"); //setA.emptySet(); int resize = setA.getLength(); System.out.println("Set size is: " + resize ); //setA.printSet(); Set setB = new Set(0,10,10); setB.add("b"); setB.add("z"); setB.add("x"); setB.add("y"); Set setC = setA.union(setB,setA); System.out.println("Elements of setA"); setA.printSet(); System.out.println("Union of setA and setB"); setC.printSet(); } } The union method works a sense that somehow I can call another method on it but it doesn't do the job, i supposedly would create and union of all elements of setA and setB but it only return element of setB. Sample output follows: java SetDemo Enter string element to be added hello You entered hello Set size is: 10 Set is empty? false Element sixb is member of setA? -1 Set is full? true Element b located on index: 2 Set size is: 9 Elements of setA Member elements on index: 0 hello Member elements on index: 1 world Member elements on index: 2 six Member elements on index: 3 seven Union of setA and setB Member elements on index: 0 b Member elements on index: 1 z Member elements on index: 2 x Member elements on index: 3 y thanks, lupin

    Read the article

  • Display a view using modalPresentationStyle

    - by happyCoding25
    Hello, I have heard that you can make a view popup like in the Mail app for iPad by using modalPresentationStyle. Im having a hard time figuring out how to use it though. I looked a this post here and still couldn't figure out how to do this task. If anyone could explain how to hook up the controllers to make this code work that would be great. Thanks

    Read the article

  • Django "comment_was_flagged" signal

    - by tsoporan
    Hello, This is my first time working with django signals and I would like to hook the "comment_was_flagged" signal provided by the comments app to notify me when a comment is flagged. This is my code, but it doesn't seem to work, am I missing something? from django.contrib.comments.signals import comment_was_flagged from django.core.mail import send_mail def comment_flagged_notification(sender, **kwargs): send_mail('testing moderation', 'testing', 'test@localhost', ['[email protected]',]) comment_was_flagged.connect(comment_flagged_notification) (I am just testing the email for now, but I have assured the email is sending properly.) Thanks!

    Read the article

  • Run Google-apps-script on Google-Spreadsheet event?

    - by jdk
    If I create a Google apps script, can I hook it up to Google spreadsheet to run based on an event, or must I manually invoke it? I don't know if Google spreadsheet supports any events. For example: a Google app script that strikes out rows in the spreadsheet that have been marked completed by way of a column having the digit 1 beside completed rows. I would like this to run whenever a row is modified, or even when the spreadsheet is first loaded.

    Read the article

  • Storyboard apply to all labels

    - by ThitoO
    Hi everyone ! I whant to apply a little storyboard to a collection of labels in my window. My storyboard is like that : <Storyboard x:Key="Storyboard1" AutoReverse="True" RepeatBehavior="Forever"> <ColorAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetName="label" Storyboard.TargetProperty="(Label.Foreground).(SolidColorBrush.Color)"> <SplineColorKeyFrame KeyTime="00:00:00.1000000" Value="#FFFFFF"/> </ColorAnimationUsingKeyFrames> </Storyboard> I have a window composed of that : <Grid Background="#FF000000"> <Viewbox HorizontalAlignment="Center" VerticalAlignment="Center" Stretch="Uniform"> <UniformGrid x:Name="grid" Background="#FF000000" /> </Viewbox> </Grid> When I want to start my storyboard I do that : Storyboard.SetTarget( _stb, myLabel ); _stb.Begin(); where _std is my storyboard loaded by the window's resources. The animation works fine, but on all labels (not only the one I want). I tried to switch SetTarget by SetTargetName but labels are created into my window by the constructor and names can not be founded when I try "SetTargetName". Do you have any ideas ? Thanks :) ------------ Edit : We asked me to be more descriptive -------------------------------------------------------------------- Label are not created directly in the xaml, they are created by the constructor of the window : public SpellerWindow(IKeyboard keyboard, int colomnNumber, SolidColorBrush background, SolidColorBrush foreground ) { InitializeComponent(); grid.Columns = colomnNumber; int i = 0; foreach( IKey key in keyboard.Zones.Default.Keys ) { Label lb = new Label(); lb.Foreground = foreground; lb.Name = "label"+(i++).ToString(); lb.Content = key.ActualKeys[keyboard.CurrentMode].UpLabel; lb.HorizontalAlignment = HorizontalAlignment.Center; lb.VerticalAlignment = VerticalAlignment.Center; Viewbox box = new Viewbox(); box.Stretch = Stretch.Fill; box.Child = lb; box.Tag = key; grid.Children.Add( box ); } } Animations are started by an event handler : void Highlighter_StartAnimation( object sender, HiEventArgs e ) { Storyboard stb; if( !_anims.TryGetValue( e.Step.Animation.Name, out stb ) ) { stb = (Storyboard)_window.FindResource( e.Step.Animation.Name ); _anims.Add( e.Step.Animation.Name, stb ); } DoAnimations( _zones[e.Step.Zone], stb ); } Finally, animations are started by DoAnimations : void DoAnimations( List<Label> labels, Storyboard stb ) { foreach( Label lb in labels ) { Storyboard.SetTarget( stb, lb ); stb.Begin(); } } I want to highlight a collection of labels, but all labels are flashing. I don't know why, but I try to create a label into the Xaml directly, and set a Storyboard.TargetName (bound to the name of the label) in the Xaml of the storyboard. And it's working ... Now you know everything. Thanks for you help :)

    Read the article

  • JavaBeans and DSLs

    - by Aaron Digulla
    It's 2009 and we still all hold on the JavaBeans despite all their flaws, mostly because of the tooling support which we wrote in our own blood. But now we have method chaining and internal DSLs and some pressure to replace or extend JavaBeans with DSL classes. Has anyone an implementation that implements PropertyDescriptor for a DSL (where the getters and setter use the exact same name as the property) and a way to hook that into the Java RT so I don't need to create them all by myself?

    Read the article

  • Documentation for Liferay Hooks

    - by Codeflayer
    Hi there, I need to listen for user log in and log out events in Liferay. From what little I've been able to find, it seems that using Liferay hooks would be the way to accomplish this. Unfortunately I haven't been able to find any information other that at the following link: http://www.liferay.com/web/raymond.auge/blog/-/blogs/portal-hook-plugins Does anyone know where I can find further documentation or how I would implement listening for user log in/log out events? Thanks in advance!

    Read the article

  • jQueryMobile: how to work with slider events?

    - by balexandre
    I'm testing the slider events in jQueryMobile and I must been missing something. page code is: <div data-role="fieldcontain"> <label for="slider">Input slider:</label> <input type="range" name="slider" id="slider" value="0" min="0" max="100" /> </div> and if I do: $("#slider").data("events"); I get blur, focus, keyup, remove What I want to do is to get the value once user release the slider handle and having a hook to the keyup event as $("#slider").bind("keyup", function() { alert('here'); } ); does absolutely nothing :( I must say that I wrongly assumed that jQueryMobile used jQueryUI controls as it was my first thought, but now working deep in the events I can see this is not the case, only in terms of CSS Design. What can I do? jQuery Mobile Slider source code can be found on Git if it helps anyone as well a test page can be found at JSBin As I understand, the #slider is the textbox with the value, so I would need to hook into the slider handle as the generated code for this slider is: <div data-role="fieldcontain" class="ui-field-contain ui-body ui-br"> <label for="slider" class="ui-input-text ui-slider" id="slider-label">Input slider:</label> <input data-type="range" max="100" min="0" value="0" id="slider" name="slider" class="ui-input-text ui-body-null ui-corner-all ui-shadow-inset ui-body-c ui-slider-input" /> <div role="application" class="ui-slider ui-btn-down-c ui-btn-corner-all"> <a class="ui-slider-handle ui-btn ui-btn-corner-all ui-shadow ui-btn-up-c" href="#" data-theme="c" role="slider" aria-valuemin="0" aria-valuemax="100" aria-valuenow="54" aria-valuetext="54" title="54" aria-labelledby="slider-label" style="left: 54%;"> <span class="ui-btn-inner ui-btn-corner-all"> <span class="ui-btn-text"></span> </span> </a> </div> </div> and checking the events in the handler anchor I get only the click event $("#slider").next().find("a").data("events");

    Read the article

  • jqGrid cell editing need to position the error message dialog

    - by Harv
    I'm using jqGrid with cell editing. I have setup the colModel properties using the editrules option. Everything works fine in that if I edit a cell and try to save an invalid value the grid displays an error dialog, but I need to know how to position the error message dialog that comes up because in the case of my layout it ends up behind a video. I'm not quite sure how to hook into this and there don't seem to be any obvious options on how to do it.

    Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >