Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 128/332 | < Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >

  • How do you stop Linux from re-setting the display brightness?

    - by Shawn J. Goff
    After manually setting the display brightness on my laptop, the system re-sets the value. If the laptop is plugged in, the value is set to full brightness; if it is not plugged in, it is set to dimmer. How do I stop that behavior? Note that I am not talking about what it does in response to the event of plugging in or unplugging my system. It changes on it's own - usually several minutes after I change the brightness value. I have observed this behavior on different systems, different distributions, and different desktop environments.

    Read the article

  • How can I run Ghost from a bootable USB key drive?

    - by Joe Philllips
    I have a laptop that does not have a cd-rom or floppy drive. It is able to boot from USB though. I have a disk image (ghost) of the disk that I need to restore back onto the laptop. I can't find a way to actually run the Ghost utility from a USB key though. I believe the ghost.exe should run from within DOS just fine but I can't seem to create a bootable USB key with DOS on it that allows me to run an EXE. Edit: I managed to find a Ghost utility that I could load from a bootable USB drive. Unfortunately, when I plug in my NTFS external drive (USB), it is not detected.

    Read the article

  • 2 accounts in safe mode ?

    - by Rameshwar.S.Soni
    When I start my laptop in safe mode, I have 2 accounts displayed, i.e. Administrator and one as R122, but when I start it in normal mode, only the R122 account is being displayed and not the Administrator one. My R122 account is password protected, so once I had a problem in installation and had to go to safe mode for some reason, I was shocked to see 2 accounts. I had once formatted my laptop with a friend of mine. Why are there 2 accounts in safe mode and only 1 in normal mode ?

    Read the article

  • Is there an application that can automatically set Graphics Properties when docking?

    - by Ken Liu
    I have a dual display setup with my laptop (Dell, with integrated graphics, WinXP). The problem is that whenever I hook up the laptop to the monitor I have to go to Graphics Properties (Intel Graphics Media Driver for Mobile) and set the display resolution, window position, etc. Note that this screen is different than the built-in one you usually see in WinXP. 1) Is there an app that can save display settings properly so they will come back when I dock again? 2) Barring this, run a script or a macro to automatically set up the display the way I want it. 3) Or, can I write a .Net program that does this for me? Extra points if there is an Open source app that can do this.

    Read the article

  • Ubuntu 12.04 doesn't detect hard disk partitions

    - by m0skit0
    I just installed Ubuntu 12.04 32-bit on an ASUS Laptop and wanted to install it in another one, the ASUS A55V. After booting the laptop and setting up Windows 7 (I unfortunately cannot wipe out Windows), and creating one extra partition to install Ubuntu there, when I reboot from USB and launch Ubuntu installation, it doesn't recognize any partition on /dev/sda, but shows the whole disk as unpartitioned. I guess this is due to UEFI, but I don't know how I can make Ubuntu see the partitions created by Windows. Or any workaround for this to be able to install Ubuntu on /dev/sda. Thanks in advance

    Read the article

  • Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

    - by blaineh
    I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

    Read the article

  • About Eucalyptus Virtualization Support

    - by rammayur
    I am having hp 540 notebook with processor core 2 duo. I have installed CLC,CC,SC and Walrus runs fine when I try to run NC, I get error "Not virtualization enabled" means my laptop does not support virtualization. I got it. Then, In my college, there is Dell desktop PC having processor Core 2 Duo. But it has virtualization enbled.So I get confused. How same thing has different effects. So my questions are Which thing is essential for Virtualization?? What should I upgrade in my Laptop Processor or buy a new one?

    Read the article

  • How to get external 2.5 inch HD enclosure get recognised

    - by fireBand
    I am completely out of ideas. I have 2.5inch HDD from my old laptop, I have tried with 2 different HDD enclosures but my desktop does not recognize it. Not even showing in the disk management or BIOS. The HDD works fine if I use in a 3.5 inch enclosure with external power. I have tried 3 different Y USB cables. I have also got a 7 port self powered 2A USB hub. I have updated my chipset drivers as well. The problem is with my desktop , the enclosures work fine with my new laptop. Anything else that I should try? Thanks in advance.

    Read the article

  • How to send Bluetooth audio to non-Bluetooth speakers?

    - by wonsungi
    In short, I am looking for a Bluetooth-3.5 mini stereo converter. What is this type of device called, and what are some of the best models (is there a difference in audio quality/lag)? I wish to connect some speakers (Altec Lansing inMotion IM7), which does not support Bluetooth, to my laptop (Lenovo X301) wirelessly. Currently, I can connect my laptop's headphone jack to the AUX jack on my speakers via a mini stereo cable. How do I replace this cable with some type of Bluetooth setup? I am not sure what this Bluetooth device is called. I thought I found something, but it actually does the opposite of what I need (3.5 mini stereo-Bluetooth). (My OS is Vista Enterprise, if that matters)

    Read the article

  • How to proxy and encrypt all my internet traffic with Win7 and Win2008R2?

    - by Malartre
    I have a Windows 7 laptop and a Windows 2008 R2 server. How can I encrypt and route all my internet request from the Win7 laptop to the Win2008R2 server? I guess the server would be called a proxy? Goal is to prevent unencrypted network snooping. I found this article about using SSH, but I would prefer an official windows integrated solution. What's the Microsoft "way" on this? http://lifehacker.com/237227/geek-to-live--encrypt-your-web-browsing-session-with-an-ssh-socks-proxy I would like this to work for all internet traffic, not just browser traffic and I would like to set this up on many Win7 clients. Carl

    Read the article

  • Function key emulator for Dell inspiron 6400 on external keyboard

    - by hardik988
    I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

    Read the article

  • How do I get a 300Mbps connection over 802.11n?

    - by Daniel Schaffer
    I just bought a new wireless setup, consisting of a Cisco E2000 router, Edimax 7718un USB adapter for my laptop and an Edimax 7728in PCI adapter for my HTPC (which isn't in a location I can run cat5 to). I have to stay in the 2.4GHz band because I have an iPhone and a Wii that will need to connect. I'm aware that 11g devices will drop speeds for 11n devices, but they aren't connected yet. The fastest connection I've been able to get, with the router within 5 feet of either the laptop or HTPC is 144Mbps. The router has settings for "20MHz" and "Auto (20 MHz or 40Mhz) channel width, which I've set to the "Auto" setting. I haven't been able to find anything similar for either of the Edimax adapters. This is the first I've dealt with 11n, so I'm not even sure what else could be causing a problem. How do I get up to 300Mbps, or at least a fair bit closer?

    Read the article

  • How to "restart/repair" an USB port?

    - by Click Ok
    My laptop have 2 usb ports, but one is broken, so I use an USB hub in the another good USB port. In that USB hub, I use a mouse and keyboard. Suddenly, that USB port doesn't detects the mouse and keyboard (even with the light of the hub is on), and the only solution that I found is restarting the laptop. But just some minutes and the keyboard and mouse goes undetected again... So, I wonder if there is some method/software/etc to "restart/repair" the USB port without restart the PC. Thanks for all!

    Read the article

  • My WD passport detected but not shown on my computer

    - by Rakesh Patel
    1TB WD harddisk is detected in laptop but drives not visible on my computer. Under disk managment drives shown without letters. Right clicking on these drives give 2 options: Delete volume Help. The same harddisk was running well on the same laptop a day before. It is also showing full size of hard drives, Healthy (Primary Partition) etc. (this happened after harddisk usage by guest). Harddisk is new only (about 5 month usage) Please suggest: Is there hardware related problem inside harddisk, if so is it repairable? Is there any option to recover data?

    Read the article

  • How to connect 2 virtual hosts running on the same machine?

    - by Gabrielle
    I have 2 virtual hosts running on my Windows XP laptop. One is Ubuntu running inside vmware player. The other is MS virtual PC (so I can test with IE6 ). The Ubuntu virtual host is running my web application with apache. I can point my browser on my laptop at the Ubuntu IP and view my web app. I read this post http://stackoverflow.com/questions/197792/how-to-connect-to-host-machine-from-within-virtual-pc-image and was able to get my Virtual PC to ping my physical machine using the loopback adapter. But I'm stuck on getting my Virtual PC to see my web application running in the Ubuntu vmware player host. I appreciate any suggestions.

    Read the article

  • Linksys Wireless-N ADSL2 WAG160N losing connection

    - by Sam1973
    It seems that recently I have to turn off and then turn on my router every time I want to connect my laptop(s) to the internet. This is what's happens: When I want to connect to the internet on my laptop, the network icon in the system tray states that I am connected to the wireless network but there's no "internet connectivity" I turn off the router and turn it back on and then I can connect to the internet. I am sure there is something that needs to be done. Can you guys point me to the right direction?

    Read the article

  • Quake 3 won't install on Windows 7

    - by Ernest Friedman-Hill
    Today I tried to install Quake 3 from my original 1999 CD on a Windows 7 laptop. Windows 7 resolutely refused to run the installer, helpfully explaining that I might need a 32- or 64-bit version, depending on what my OS is (you have to love those Windows error messages: absolutely correct, but as unhelpful as humanly possible). In any case, of course the 1999 software is 32-bit, and the laptop is 64-bit. But I was pretty sure that 64-bit Windows versions could handle running 32-bit software. What gives?

    Read the article

  • Replace Hard Drive in Samsung NP900X1A - Need Disassembly Help Please

    - by xedgex
    Need to clone and restore existing 64GB HDD onto a 256GB HDD, can't manage to gain access to the internals of this laptop. I checked with Samsung, they do not make manuals available nor will they help over the phone as to how to remove the bottom cover of this Samsung NP900X1A Laptop. They did offer to sell me a manual BUT they are out of stock for another 10-15 days. I saw the screws under the 4 rubber feet and 4 rubber grommets, all removed but the cover is still on. Does anyone know if there are more screws to take off here? Also, I assume this replacement HDD will work (facto

    Read the article

  • Is there a lightweight MTA for Ubuntu 9.10 Desktop?

    - by Joe Casadonte
    I'm writing a Perl script to run as a cron job, and I want to email results & errors to a local account on the laptop. I'd like something that can talk SMTP (do any MTAs not adhere to SMTP?). I use Thunderbird 3, so I'll also need a POP/IMAP server (unless T-Bird can read straight from an mbox file; I'll have to check into that). No need for spam controls as I'll lock it down real tight, only accepting mail originating from the laptop itself. Thanks!

    Read the article

  • Windows7 + Dell D830 = frequent blue screens

    - by Mulone
    I'm using Windows 7 on a Dell laptop (Latitude D380). The laptop used to be incredibly stable on Windows XP, but now I experience frequent blue screens (with a message saying "MEMORY DUMP") when I open a lot of applications concurrently. Is there a way to diagnose the issue and track it down? It could be some incompatible drivers or application. I checked the folder C:\Windows\Minidump and I found some files. THen I tried to open them and they disappeared. Any hints?

    Read the article

  • Transfer Raid Drives to External Enclosure

    - by dubbeat
    I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

    Read the article

  • Access my router's gateway network?

    - by Danpe
    I have 2 routers in my place. Main Router (Connected to the Internet) - 192.168.1.1 Secondery Router (Connected to the Main Router) - 192.168.0.1 I have a Network Storage Device and few Shared Directorys connected to the Main Router. (Network Storage - 192.168.1.16) How can i acces one of them using a PC connected to the Secondery Router? Home Network Diagram: I currently have access to the internet using both laptop and Main PC. But i want to get access from my laptop to the Storage and to ym shared directorys. The problem is the my Main router always forwards all packets stright to the WAN.. (Internet)

    Read the article

  • Allowing access to MPD from local network

    - by August Karlstrom
    I have successfully installed MPD (Music Player Daemon) on my desktop computer. Everything works fine when the client runs on the same machine as the server. Now I would like to access MPD from my laptop computer which is connected (wirelessly) to the local network. In order to allow access to MPD from any computer on the local network I have added this line to /etc/hosts.allow: mpd: .local and restarted MPD. Still I get the message "error: Connection refused" when I try to access MPD with MPC (Music Player Client) from my laptop. Any clues or troubleshooting hints?

    Read the article

  • ssh client problem: Connection reset by peer

    - by yonix
    I'm having a really annoying problem on my Ubuntu laptop. I noticed it today, after upgrading to Ubuntu 11.04, although I'm not entirely sure this is the cause as I played with my ssh keys a few days ago. The problem is, whenever I try to ssh to ANY host I get the following error: Read from socket failed: Connection reset by peer running with -vvv gives the following output: OpenSSH_5.8p1 Debian-1ubuntu3, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to hostname [10.0.0.2] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_rsa-cert type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: identity file /root/.ssh/id_dsa-cert type -1 debug1: identity file /root/.ssh/id_ecdsa type -1 debug1: identity file /root/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 1.99, remote software version OpenSSH_4.2 debug1: match: OpenSSH_4.2 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-1ubuntu3 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "hostname" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: loaded 0 keys debug1: SSH2_MSG_KEXINIT sent Read from socket failed: Connection reset by peer My /etc/ssh/ssh_config: Host * SendEnv LANG LC_* HashKnownHosts yes GSSAPIAuthentication no GSSAPIDelegateCredentials no I can connect to my laptop from any other server via ssh, and I can also ssh localhost from my laptop successfully. I can connect to all these other server from other laptops, and I don't see anything in the logs of the other servers regarding my failed attempt. I tried to stop iptables, didn't help. I tried several tricks I could find online with my /etc/ssh/ssh_config, but I was unsuccessful in solving the problem... Any ideas? Edit: This is the log from one of the hosts I try to connect to: May 1 19:15:23 localhost sshd[2845]: debug1: Forked child 2847. May 1 19:15:23 localhost sshd[2845]: debug3: send_rexec_state: entering fd = 8 config len 577 May 1 19:15:23 localhost sshd[2845]: debug3: ssh_msg_send: type 0 May 1 19:15:23 localhost sshd[2845]: debug3: send_rexec_state: done May 1 19:15:23 localhost sshd[2847]: debug1: rexec start in 5 out 5 newsock 5 pipe 7 sock 8 May 1 19:15:23 localhost sshd[2847]: debug1: inetd sockets after dupping: 3, 3 May 1 19:15:23 localhost sshd[2847]: Connection from 10.0.0.7 port 55747 May 1 19:15:23 localhost sshd[2847]: debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1 Debian-1ubuntu3 May 1 19:15:23 localhost sshd[2847]: debug1: match: OpenSSH_5.8p1 Debian-1ubuntu3 pat OpenSSH* May 1 19:15:23 localhost sshd[2847]: debug1: Enabling compatibility mode for protocol 2.0 May 1 19:15:23 localhost sshd[2847]: debug1: Local version string SSH-2.0-OpenSSH_5.3 May 1 19:15:23 localhost sshd[2847]: debug2: fd 3 setting O_NONBLOCK May 1 19:15:23 localhost sshd[2847]: debug2: Network child is on pid 2848 May 1 19:15:23 localhost sshd[2847]: debug3: preauth child monitor started May 1 19:15:23 localhost sshd[2847]: debug3: mm_request_receive entering May 1 19:15:23 localhost sshd[2848]: debug3: privsep user:group 74:74 May 1 19:15:23 localhost sshd[2848]: debug1: permanently_set_uid: 74/74 May 1 19:15:23 localhost sshd[2848]: debug1: list_hostkey_types: ssh-rsa,ssh-dss May 1 19:15:23 localhost sshd[2848]: debug1: SSH2_MSG_KEXINIT sent May 1 19:15:23 localhost sshd[2848]: debug3: Wrote 784 bytes for a total of 805 May 1 19:15:23 localhost sshd[2848]: fatal: Read from socket failed: Connection reset by peer

    Read the article

  • Vista to Vista network visability issue

    - by Sk93
    Hi All, I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely. I can ping each machine fine from one another using the ip addresses, and I can also connect via \. However, connections via \ fail, and I cannot see the machines in the network map. I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference. I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now). Any ideas?

    Read the article

< Previous Page | 124 125 126 127 128 129 130 131 132 133 134 135  | Next Page >