Search Results

Search found 3996 results on 160 pages for 'flavour of the month'.

Page 129/160 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

• Why am I seeing Zero errors in non-ECC RAM?

  - by Alexander Shcheblikin

  According to sources, memory errors are a very probable event: Some say the probability of a DRAM error is 95% in just 3 days of operation of a computer with just 4 GB of RAM, others say 32% of servers experience at least one error in a month with 8% of DIMMs being at fault. Contrary to those horrors, in my more than 10 years of personal computers use I have seen exactly none of the memory errors. I admit I never paid special attention to the subject. However, I have ventured multi-hour memtest86 runs couple of times and never seen an error either. Some of the factors that IMO should aggravate the memory problems: I build my computers out of the most "bulk commodity" parts: mainstream budget motherboards and the next to cheapest memory. also I usually max out the technology available, e.g. in the times of 32 bit OS'es I used 4 GB of RAM and with the current desktop CPUs and the newer 64 bit OS'es I use 32 GB of RAM. memory usage is moderately heavy with lots of virtual machines up running small and big tasks 24/7/365. But nevertheless, no memory-related problems ever found! How's that?

  Read the article

• Can Internet data be used by malware when PC off?

  - by Val

  I have noticed over the last month that my off peak data has been used at a rate of approx 350MB per hour - this has meant that I have gone over my quota and slowed down by my ISP to 256k. There is no one in the house using it (2am-8am is my ISPs off peak hours) at that time. My PC and other wireless devices (ipad and iphone) are turned off. I have changed the wireless password on my modem 3 times and it is now 30 digits long. So I don't think someone else is using my wireless access between 2-8am. It has been suggested by my ISP that I may have malware/spyware on my computer. Sorry for my ignorance, but can malware still run if the PC is off? I did look at my modem's log and followed an IP address to a service called Amazon Simple server Storage. Could this company possibly be the culprit? I am not too tech savvy, so any assistance appreciated. I have run a barrage of spyware cleaning software eg malware bytes; spy bot etc.... Cheers Val

  Read the article

• Creating "save as" functionality to .eml file in AppleScript

  - by unieater

  I'm new to AppleScript and trying to figure out how to save a Mail.app message as an .eml message. Ideally, I would like it to act similar to the Mail menu bar actions, in which it saves the message and the attachments together. The workflow is that you have a selection in Mail, hit a hotkey and the function creates a filename (newFile) for the email to be saved. I just need help with how to save the message to the path (theFolder) in an .eml format. tell application "Mail" set msgs to selection if length of msgs is not 0 then display dialog "Export selected message(s)?" if the button returned of the result is "OK" then set theFolder to choose folder with prompt "Save Exported Messages to..." without invisibles repeat with msg in msgs -- determine date received of msg and put into YYYYMMDD format set msgDate to date received of msg -- parse date SEMversion below using proc pad2() set {year:y, month:m, day:d, hours:h, minutes:min} to (msgDate) set msgDate to ("" & y & my pad2(m as integer) & my pad2(d)) -- assign subject of msg set msgSubject to (subject of msg) -- create filename.eml to be use as title saved set newFile to (msgDate & "_" & msgSubject & ".eml") as Unicode text -- copy mail message to the folder and prepend date-time to file name -- THIS IS WEHRE I AM COMPLETE LOST HOW SAVE THE EMAIL into theFolder end repeat beep 2 display dialog "Done exporting " & length of msgs & " messages." end if -- OK to export msgs end if -- msgs > 0 end tell on pad2(n) return text -2 thru -1 of ("00" & n) end pad2

  Read the article

• Why can't I debug my ASP project through a remote desktop connection?

  - by Anthony Benavente

  I just asked this question in Stack Overflow but I figured this stack exchange forum is a better fit. It's been about a month of trying to figure out this problem and we've still not found a solution. We have about seven virtual machines on a server running Windows XP Professional w/ SP 3 all with Visual Studio Interdev and IIS 5.1 installed. Running the programs all work fine, but we just can't debug through remote desktop. When we are logged into the server console (through VM Sphere) and log into one of the virtual machines through there, we are able to debug properly. We figured the issue lies with some kind of permissions for Remote Desktop Users. We've tried nearly every article on the internet (exaggerating of course) and are about to give up hope. One more thing, when we are logged into the virtual machine through the server console and then remote in, the user that was logged into the console is kicked off but debugging works! Does remoting in trick the computer into giving us the correct permissions? I'm really not sure how it works. I know that this technology predates human history, but we are in the process of migrating from ASP Classic to ASP.NET Specs: - Windows XP Professional W/ SP3 - IIS 5.1 - Visual Studio 6 Interdev EDIT: By "debug" I mean running the project with breakpoints. Interdev doesn't stop at breakpoints.

  Read the article

• Different external ip addresses from different sites

  - by user630286

  My router is ClearOS 6(Centos 6). In my router, I have two external (internet) network connections from two ISP's. The primary connection is eth2 connected to a cable modem and the second one is ppp0 connected to a dsl modem. I have assigned eth2 as the primary connection (with a high metric value). In fact this is done through clearos's multiwan web interface. I have a test in my Nagios to monitor whether the primary connection. This connection is done based on the result of curl ifconfig.me But it seems that ifconfig.me is always giving the ip address of my secondary connection. I tested it through a browser. Yes ifconfig.me gives the secondary internet's(ppp0) ip address. But whatismyipaddress.[com|org] give my primary ip address (eth2). I checked the default route on the router through ip route list 0/0 which also shows the primary connection (eth2) as the default route. The traceroute www.google.com and traceroute ifconfig.me both seems to trace through the primary connection (eth2). As our secondary internet connection has only got a limited download, I don't want to end up having to pay a large sum at the end of the month. Has somebody got an idea why the ifconfig.me shows my secondary address? What is the best way to ensure that my router(and thus the lan) use the right internet connection.

  Read the article

• Hosting multiple websites from home

  - by dean nolan

  I have just been accepted for Microsofts Wevsite Spark program which I mainly got for the tools, Visual Studio, Blend. I also have a few of my own websites, personal and a couple of business ones. I also work freelance and sometimes I would like a place to just put a demo up of a clients project. The websites I currently have are all on differnet hosting provders and domain registrars. The WebsiteSpark comes with Windows Server 2008 and SQL Server 2008. It would be really advantagous of me to have all these in one place but also so I have complete control over the database and the environment. So I am thinking over the next 4-6 months of migrating all this to my own server that I will host from home, or maybe even setup at home and then store in a proper datacentre. I was wondering what steps I should take and what to be aware of, specifically: 1) having all these different websites on one computer and having the url got to the proper place. 2) Cost effectiveness? Having the server in home as apposed to datacentre. Most solutions I see charge over £1000 a month to have a machine in datacentre. This is mostly for my own ease of management and shared hosting which I currently have is very limited configuration wise. Would getting a server in house be beneficial for then upgrading to the cloud? What measures should I take with my ISP? I know this is a lot I've asked but just even links to good articles would be good. Thanks

  Read the article

• logrotate: neither rotate nor compress empty files

  - by Andrew Tobey

  i have just set up an (r)syslog server to receive the logs of various clients, which works fine. only logrotate is still not behaving as intending. i want logrotate to create a new logfile for each day, but only to keep and store i.e. compress non-empty files. my logrotate config looks currently like this # sample configuration for logrotate being a remote server for multiple clients /var/log/syslog { rotate 3 daily missingok notifempty delaycompress compress dateext nomail postrotate reload rsyslog >/dev/null 2>&1 || true endscript } # local i.e. the system's very own logs: keep logs for a whole month /var/log/kern.log /var/log/kernel-info /var/log/auth.log /var/log/auth-info /var/log/cron.log /var/log/cron-info /var/log/daemon.log /var/log/daemon-info /var/log/mail.log /var/log/rsyslog /var/log/rsyslog-info { rotate 31 daily missingok notifempty delaycompress compress dateext nomail sharedscripts postrotate reload rsyslog >/dev/null 2>&1 || true endscript } # received i.e. logs from the clients /var/log/path-to-logs/*/* { rotate 31 daily missingok notifempty delaycompress compress dateext nomail } what i end up with is having is some sort of "summarized" files such as filename-datestampDay-Day and corresponding .gz files. What I do have are empty files, which are eventually zipped. so does the notifempty directive is in fact responsible for these DayX-DayY files, days on which really nothing happened? what would be an efficient way to drop both, empty log files and their .gz files, so that I eventually only keep logs/compressed files that truly contain data?

  Read the article

• tomcat vs FULL J2EE Solutions

  - by jrhickey

  We are getting ready to make a major revision in our Web Application architecture which currently is running on JBoss 4.2. At first we were looking at moving from 4.2 to JBoss 6 but after some research tomcat may be a better solution for us. My first question is their anything that JBoss can do that tomcat cannot do assuming you are using the correct plugins. We do not really use EJB's in our solution and it would appear there are simple plugins for web services, JMX and other features. Tomcat appears to have much better support, faster upgrade cycles and many, many books. Since there is less to the system it also seems much easier to support from an admin point of view. What am I missing? The main features we want to enable are better clustering support and session replication / persistence. We will consider other application servers as well such as Glassfish / Geronimo. quote form a web article: Apache Tomcat is the world’s most widely used web application server, with over one million downloads per month and over 70% penetration in the enterprise datacenter. Tomcat is used to power everything from simple one server sites to large enterprise networks.

  Read the article

• Is there an application to log component temperatures to file?

  - by MrVimes

  I purchased a computer a month or two ago (core i7, 24gb ram, geforce gtx 590, windows 7 ultimate). Within the last week it began to bluescreen regularly. I tried lots of things (check hds, check memory, reinstall windows etc..) but it still bluescreened. At the time my temps were as follows... CPU - aprox 40/50c. GPU - arpox 60 idle, aprox 90 during heavy use. HDDs - aprox 55c after the PC had been on a while. I thought the 55c was ok, but I have since realized it was probably too high and may have been the direct cause of the bluescreening. I've installed a spare fan I had in the front of the PC blowing air in, (so there's airflow from front to back) Since then, obviously, all my temps are down. Especially the HDDs - three of them reach 30c and one has been up to 47c (it is some distance away from the airflow, in one of the 5.25inch drive bays) I haven't had the PC on for as long as it would normally take to bluescreen yet, but If it does I want to know what all the temps were right before the bluescreen. I have tried Everest but it only shows me realtime temps or gives me the ability to create one-off reports. I want something that can record all the temps to a file at 30 seconds intervals. If the computer bluescreens I can load it up again and check the last entry in the file. Side question: Am I right in thinking 55c was far too hot for a HDD? (It might have got higher than that before the bluescreens.. I don't know) Another side question: Is 47c too high? This is actually why I am asking the main question - I am concerned that this one drive that isn't getting the benefit of the extra fan may still cause the computer to bluescreen.

  Read the article

• Sharing music on NAS with Zune and iPod?

  - by osij2is

  After being a long time iPod owner, I'm switching to the new Zune with its subscription model. I haven't bought a Zune yet but I'm planning on doing so within the next month or so. I have approximately 40GB worth of music and my girlfriend has her iPod music library around 30GB. I've been trying to figure out how to migrate all our music off of our laptops/desktops and centralize everything on my NAS. In sharing iPod music isn't too bad. Sharing from one machine to all is fairly easy within the iTunes player. As far as storing all the music on a NAS, again, iPods aren't too bad and imagine other systems aren't difficult. But I'm really new to the Zune and I'm beginning to run into some issues. My questions are: Is it possible to store all music from our iPods and Zune subscriptions and share music between the iPod/Zune within the same file share on my NAS? I'm sure it's possible to store music on a share, but I'm not sure how iTunes and the Zune software differs. Is there 3rd party software, maybe something like DoubleTwist that can sync based from NAS to multiple desktop/laptops? I've never used DoubleTwist but it's something that I found that looks close to being what I need. I've never quite done this myself so I'm trying to find a solution that can: a) store music on a network share; b) sync between different devices (Zune/iPod) seamlessly.

  Read the article

• hosting company blocking google bots and crawlers [closed]

  - by Jayapal Chandran

  Hi, I am having a site for the past three years and it is very active for the past two years. Until not the site is working well and also now but not after the hosting company blocked google bots. Many pages appeared in the first page of the google search. After they started blocking i couldn't see my links in the first page instead they appeared after 5 pages or they did not appear at all. Will hosting companies be so stupid that they block and dont mention it to their users. They want to protect themselves by making the websites at stake. I display google ads and not this month i got only half for this 10 days. I have made requests to other hosting companies like blue host and monster host that i wan to transfer my domain by making a condition that the will not block google bots which stops the business indirectly. so any kind of help will be helpful. how can i claim what i lost from the hosting company. what other hosting companies consider the users (by informing the events like changing the IP or blocking google bot.) It was really working hard to bring up my site but these people just crashed down my site in a few days. :-(

  Read the article

• Recovering corrupted VB.NET Form file?

  - by Omega

  Good day. This question is directly related to this one I made here: http://stackoverflow.com/questions/4911099/there-is-no-editor-available-for-form1-vb-error There, I was working on my VB.NET 2010 Express application, I saved, then a blackout came and now, apparently, I can't view the designer nor code of my Form file (Form1.vb). On StackOverflow, I was recommended to check for the From1.vb file, and try to open it on Notepad. If nothing appeared, it would mean that my file was corrupted. I open it on Notepad, and I get a blank file. It is 27kb, but it only has blank spaces. So I assume it is corrupted. I was told this place was better for dealing with corrupted files, about techniques to recover them. I use Windows7, VB.NET 2010 Express. I run Windows7 on Parallels Desktop, Mac OS X. However, I do not believe that is the problem, most likely it was that damned blackout... this is the first time that happens to me. VB.NET worked just fine for me all time (about a month and half). Thank you.

  Read the article

• does leaving the laptop cord in break the cord?

  - by firedrake

  i recently got a new cord for my laptop because the cord i had before broke.im not sure how it got messed up, but one moment it charged my laptop and the next moment it didn't. i then got a new cord. the new cord worked perfectly fine until now, and it has only been a month. the cord wont work unless i am pressing it into the socket, which i am currently doing. the only thing i can find in common with the cords is that i leave them plugged in 24/7. my brother says that is the problem, but i do not think it is.any tips or hints? im going to use duct tape to keep the pressure on the cord till i can find a better solution(im also thinking it could be the hole i plug it into on the back of my computer, but im focusing on the other idea for now.if i wiggle the plug part in the socket of my computer it will stop charging unless im pressing it in or to the side) any help or ideas are appreciated. not sure if this will help but i use a gateway with windows vista. thanks

  Read the article

• Exceptional slowdown of robocopy copying from VM to DFS array

  - by user1588867

  I've got an old win 2003 VM (VMware) on a blade cluster of VMs that I'm moving a considerable amount of files to our new DFS array. There are two main folders with about 1.7 million and half a million smaller files (letters, memos, and other smaller files) respectively. Total size is ~420 GB and ~100 GB. We're using the gui version of robocopy on the server to copy the files. We had initiated a file copy about a month ago to test the process and found that it was taking around 4 hours for the large file. Now that I'm in the process of actually switching the files over it has been taking 18-20 hours. Nothing has changed on the server side and nothing has changed on the settings of the copy (no logs, 1 retry with a wait of 1 second). Our intent is to shut off the share and force the copy over again to get all the files that have been left out of the copy due to being locked by users. I can't take a 20 hour outage to do that though. Does anyone have any theories about what could be causing such a delay for robocopy compared to previously shorter runs?

  Read the article

• Backing up a Windos 7 partition from Macbook with no OS X

  - by mattcodes

  I have a 3 year macbook with Windows 7 installed as 40gb and OS X as 40gb (80gb HD). I want to remove OS X as Im at the limit of 40gb on Windows and I have not logged on to Mac OS X since installed Win7 (dont flame me). So I want to delete OS X partition and expand my win partition to 80gb BUT I still would like to be able to regularly (once a week/month) backup my Windows 7 partition - its took a while to setup everything up right - not just docs and programs - so when the hard drive dies I want to be able to restore the partition and boot away, (the daily volatile bits I can pull down from dropbox and project from soure control). With Mac OS X I could use Winclone - and this worked flawless last time the HD failed with XP but with the absence of OS X I will need something else. Im thinking can I use a Linux Live boot CD along with an external USB hard drive. Boot from CD and then dd? the partition to the USB? What linux distro live CD should I use? I say dd as if I know what am taking about (I dont) is this the best way to backup a partition (when it will be restored to same hardware as bootable) ? What command?

  Read the article

• Symantec Antivirus Corporate -- two problems

  - by Alex C.

  We have a Windows network with a domain and about 50 clients. A few months ago, we installed Symantec Antivirus, Corporate Edition ver. 10.1.8.8000. There are two problems. The larger problem is that the software isn't very good at stopping viruses. In the last month, four different machines have become infected with those viruses that masquerade as antivirus software. Two machines I was able to clean with MalWareBytes. The other two were hopeless, and I had to reinstall Windows. Is there something I can do to make the Symantec product more effective? As far as I can tell, it successfully updates definitions nightly and pushes the definitions to the clients. The smaller problem is that the Symantec client applications sometimes initiate scans at random (and inappropriate) times. One of my co-workers complained to me yesterday that her computer was running very slow. I looked at the scan history and found that Symantec had scanned the computer three times during the past two days, and each time during the workday. No threats were found. Not sure why it's doing this, but I'd like it to stop. Any help would be appreciated. Thanks.

  Read the article

• ssh hangs on "Last login" line

  - by Pavel H

  This happened for the first time three days ago - I ssh to the server, authenticate using a password, get the welcome message but it remains hanging on the "Last login:..." line. The command line doesn't show and the server doesn't react to my input. Other services on the server keep working ok (apache, tomcat, database, ..). The box has an out-of-band management using which I was able to restart it. After the restart the ssh worked ok again and I didn't find anything suspicious in the logs. Three days later the same problem occurs on this box again, and newly on yet another server in the cluster - 100% same symptoms. Both servers have about 2 month old installation of Debian Squeeze (6.0.2) and the problem never occurred before despite frequent ssh-ing, so it should not be a problem of settings. We haven't been installing anything new for quite some time now. I also made sure there is enough disk space on both servers. Since it started to happen all of a sudden on two servers at about the same time, I suspect some bug may have been introduced via Debian updates, yet I haven't been able to find anyone with the same problem. Most similar issues I have found: ssh freezes at the "Last Login Line" - in our case everything worked fine until recently, so nothing related to settings should be our problem. Diskspace checked, I couldn't check the memory but I would expect something would be in the logs if the system had been running out of it. Remote Fedora system unresponsive, odd but consistent behavior when trying to log in - problem with high load on the server; unlike in this case, nothing changes even if I wait for 10+ minutes

  Read the article

• What kind of hosting do I need? [closed]

  - by Robert Smith

  I have been trying to answer this question but I haven't found an specific answer to my situation. As I want to pay for what I need, I thought I could get a good answer here. I have custom made forum (rather than a built-in forum like the ones you can find as plugins, e.g. WP-Forum or phpBB type of software) in Django. I don't want to use Apache and modwsgi because it's usually very memory-hungry and I can't afford a big server. I prefer a combination of nginx and gunicorn which I think is very efficient (maybe you can also tell me what you think about that). I'm expecting to receive 10,000 to 20,000 visits each month with 15,000 to 30,000 page impressions. I have reviewed some cloud services like Amazon EC2 or Rackspace and other more traditional services (Linodo). This site won't use videos or big images and I certainly don't need a huge amount of bandwidth (200GB would be definitely too much). I need shell access so shared hosting is out of the question. What do I need to run a website like that without problems? What about RAM? 256MB would be enough (that's the amount of RAM offered by small instances in Amazon and Rackspace)? Do you know of any alternative to those I mentioned? If you need more information to provide a useful answer, please don't hesitate to ask. Thanks a lot.

  Read the article

• Port(s) not forwarding?

  - by user11189

  I have cable internet service through Charter Communications and feed two desktop computers through a Linksys RP614v3 router. One system is my wife's running WinXP Home Edition and the other is mine, running Vista Home Premium (sp1). I have port forwarding configured in the Linksys so I can access the Vista system remotely using TightVNC. Initially, it worked great and I was able to remotely tend email and access local files while out of town for work. Lately, the cable internet service appears to flicker intermittently and upon return, my Mailwasher program loses ability to access the net and I've been unable to make the remote connection. When I reset the port forwarded for email in the router control panel, Mailwasher functionality returns but as I'm home when that happens, I have no easy way to check remote access until the next time I'm on the road or at work. I'm at my wit's end -- the TightVNC client accesses fine from my wife's system from behind the modem/router setup but I don't know how to maintain whatever gets reset when I fiddle with the control panel and the need to do so at all is new. I accessed it fine for a week off and on while out of town a month ago and now I can't leave home and access it from work an hour later.

  Read the article

• How can I inject clips [ads] in a playlist every x minutes (even if previous clip is not over)

  - by azera

  Sorry for the title, I find it quite hard to describe what I want to do in a single sentence We have a few TV here linked to our computer, which we use to display clips about what we do in our sport center, what you should do to stay in good form ect ... It's running non stop, actually though vlc + playlist. Those main clips are 1-2 hours long and we have about 20 of them looping randomly all day. We would like to inject ads for some of our sponsiored products every now and then during the playlist, like say one ad every 15 minute. Does any one know how we can do that, while keeping the main clip random order ? I thought about encoding the whole thing as a single movie with ads inserted, but then it's not random. So we can put the ads in the playlist itself right ? Except clips are several hours long and we want that more often than that. Cutting the main clips in several pieces seems to work but that kind of sucks as new clips are made every month. If any one has an idea, thanks a lot

  Read the article

• Can't detect hard drive on Macbook Pro

  - by MartinMoizard

  I changed a few month ago the config of my Macbook Pro with the following: I bought a SSD hard drive I removed the hard drive of my Mac book Pro and installed there my brand new SSD Then I removed my DVD drive and installed my hold hard drive instead with a caddy Everything was working great until today when I couldn't access anymore to my old hard drive because it is not detected anymore. Sometimes Mac OSX is mounting it but it takes like 15 min to browse a simple folder. I opened my laptop to have a look at the problem. It seemed like the optical drive connector was not plugged correctly to the motherboard (that connector: http://cl.ly/2T0X2e1j0J1g47061d1t). So I plugged it correctly and reboot. It didn't fix my problem. Then I tried to put my SSD in the caddy and to boot: no hard drive was detected. So I guess there is something wrong either with the caddy, either with the optical drive connector, or either with the plug that is on the motherboard. So my question is, how can I know where the problem comes from?

  Read the article

• Client cannot access my IIS7 web server

  - by Soccerwiz

  I have a Windows 2008 web server on running IIS 7 with about 25 websites. One of those sites is an SaaS application that is accessed constantly throughout the day. However, one particular client keeps getting blocked from my server. They will be using the service, and then all of a sudden they cannot access the program, or any other site on the server. The entire office of 4 users is blocked from accessing anything on the web server. A trace route reveals they get all the way to the server before they are blocked. However, they can access a linux server that is a different VM with a different IP on the same physical server. Also, when they are blocked from their office, they can still access the site from their mobile phone or local Starbucks. They can also occasionally reset the router and gain access to the web server again as they are on a dynamic IP address. I checked IIS and allow all IPs to access the server. There is nothing in the logs the says anything about a user being banned. I really have no idea what is causing this? Could it be a virus on their end? I have even moved the SaaS to a completely new server in a different location, and they were working fine for about a month, and then the problem started occurring again. Are there any hidden blacklists in IIS? Or is it a routing issue on their end?

  Read the article

• Windows Server 2008 is stuck at "configuring updates - stage 3 of 3 - 0% complete"

  - by Chris

  This has happened the last two times I've done updates to this system, and I really have no idea what is going on. It is installing a only a month's worth of updates. It only responds to ping and no services are up, so I can't view the system remotely (I have to hook up a monitor to see this message). In the past I've just restarted the system at this point and it eventually finishes updating. I want to know what I can do to avoid this situation, how to diagnose what is going on, and how to get any kind of remote access during the updates. Edit: I can start the machine in safe mode (where I did nothing but backup some files). I restarted and it no longer tries to do a windows update, just goes to the desktop where everything seems extremely broken. I can click on some things, but not launch most programs. I guess all I can do at this point is do a system restore or something. Edit: Re-installed windows on this system yesterday. That's my usual solution to issues I don't feel like diagnosing, like this one.

  Read the article

• RAID5 issue after replacing motherboard and upgrading firmware

  - by 8steve8

  ok so ive had a 4x2TB(samsung HD204UI w/firmware patch) raid5 array working normally for about a month. It was in a h57 gigabyte motherboard using the intel raid with Windows 7 x64. Today I got an intel h67 motherboard, so I upgraded the intel raid drivers to 10.1.0.1008 from 9.6.0.1014, and I'm not sure if i checked after a reboot, but it caused no problems. I swapped in the new dh67 motherboard, and my array status was "failed". 2 of the 4 drives listed themselves as members, while the other two drives listed themselves as non-members. I tried going back to the old h57 mobo, and downgrading the raid drivers, but the issue remains. It's not port dependent, 2 of the drives always come up as non-members regardless of what port or motherboard they are plugged into. This screenshot should show that the SNs match, which raises the question why the software doesn't realize the drive is a member of the array. I'd like to know if anyone has experienced anything similar, and what should I do, can I force the drive to be recognized as a member (without wiping data)?

  Read the article

• Is Ubuntu a bad distro for a standalone mysql database server?

  - by DhruvPathak

  I read an article here : http://www.mysqlperformanceblog.com/2011/12/08/which-linux-distribution-for-mysql-server/ On the other end there are Debian and Ubuntu. Both use tool called dpkg for package management. There isn’t a month that I log in to a system based on either distribution where there are no issues with packages consistency. Unfinished installations, unresolved conflicts are so common that it’s just beyond simple negligence. The packaging system is just not robust enough. Another problem is that one broken package may block you from installing or uninstalling anything else. Imagine that someone left system in such shape, you prepared for downtime, stopped MySQL and… error – text editor has not been properly installed, so you cannot upgrade MySQL either until the problem is fixed. In a stressful situation when downtime clock ticks – annoying at best We prefer Ubuntu server because of familiarity and Ubuntu also being development environment. Questions: Is Ubuntu used commonly in production for a mysql database server ? Is it worth the trouble ever to have one distro eg Ubuntu in web server, and another say Red Hat in database server ? Or Is a homogenous server pool a better choice ?

  Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >