Search Results

Search found 11425 results on 457 pages for 'ip messenger'.

Page 129/457 | < Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >

  • How to access this server?

    - by George Edison
    I have a server that I cannot access. At first I thought it was just some temporary failure with the server, but checking from other IP addresses reveals that it is working just fine. It's only my IP address that's failing. So here is what I've tried: nslookup - resolves correctly ping - 100% packet loss using the IP address or domain traceroute - first few hops work, but from about 6 and on, I just get stars Edit: I am using OpenDNS for DNS resolution, and as mentioned above, the problem is not DNS resolution anyway.

    Read the article

  • Is there a Linux kernel boot parameter to configure an IPv6 address?

    - by aef
    I know there is a parameter named ip which lets you configure IPv4 addresses on the Linux kernel through the boot loader. That looks like the following: ip=192.0.2.1::192.0.2.62:255.255.255.192::eth0:none I'm looking for an equal parameter for IPv6 configuration. I couldn't find anything about this in the kernel documentations. Update: Because of a lot of you asked why I would need this: The idea to use a kernel configuration came up related to this problem. I suspect the regular boot-up interface configuration is not done, because the interfaces are already up. The reason for this could be that I'm using a pre-boot environment with a Dropbear SSH server to allow me to unlock my encrypted root partition. The IP addresses for this environment are configured through GRUB with the ip= parameter. There is no DHCP or Router Advertisement available on that Ethernet segment and as this is the uplink segment provided by a large hosting company, there is no way to change that fact.

    Read the article

  • If I ssh to a domain provided by dyndns, does my password go through them?

    - by D Connors
    I'm running Ubuntu on my work PC, and my work place provides me with a static IP address but not with a domain. It's sometimes useful for me to connect to that PC through ssh, but it's not common enough for me to instantly remember the IP number. So I set um a dyndns account, and associated a short and intuitive domain name to that IP. Here's my question, when I try to ssh to the domain, it asks me $ ssh [email protected] The authenticity of host 'something.there.foo (xx.xx.xx.xx)' can't be established. RSA key fingerprint is 'ALPHANUMERIC STRING' Are you sure you want to continue connecting (yes/no)? That surprised me a little bit. I have already registered the RSA fingerprint by connecting directly to the IP address. I thought the domain name was simply a convenient way of pointing me in the right direction (i. e. the ip address), but that message makes me think my data is actually going through their servers or something. Which one is it? Am I sending my password through someone else's server? Or is ssh just really really careful, thus warning me even if the final destination is a know host? The ssh server I'm using is the openssh-server package.

    Read the article

  • Squid3 not working. Access denied

    - by Nitish
    I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

    Read the article

  • Configuring bridged network connection --- Windows 7 host, Ubuntu 10.04 guest --- VMWare Workstation 8

    - by H3br3wHamm3r81
    Here is my IPCONFIG /ALL from the host (Windows 7 64-bit): Here is my IFCONFIG from the guest (Ubuntu 10.04): To be honest, I don't have experience configuring a network between a host and a guest in VMWare (a virtual machine). I've searched high and low on the internet, but I haven't seen anything that can help. Perhaps I'm just not using the right keywords when I search. Nevertheless, does anyone here have any experience with establishing a network connection? Edit: One important note. I don't use DHCP to provide private addresses to the hosts on my LAN. I use "static" IP addresses on my internal network by configuring each IP address manually in the host's network configuration utility (I have TV's, XBOX 360, and a few PC's). I would like to configure the IP on the virtual machine guest manually as well. The reason is because my XBOX 360 only works properly using a static IP address. It will kick me off XBOX Live if it has one given by the router (via DHCP).

    Read the article

  • dhcp code for pxe server

    - by avoq
    I'm trying to understand every single line of the following script but to no avail. I'd be glad if someone could help me. For sure I know its purpose is to start the DHCP server as well as the TFTP...But I'm stuck: killall dnsmasq 2>/dev/null dnsmasq --enable-tftp --tftp-root=$PXEDATA/boot --dhcp-boot=pxelinux.0,"$IP",$IP --dhcp-range=$(echo $IP | cut -d. -f1-3).50,$(echo $IP | cut -d. -f1-3).250, infinite --dhcp-option=option:router,192.168.0.254 --log-dhcp Why killall, why dnsmasq 2 What does "2" stand for? "--" what does it mean? Thanks a lot.

    Read the article

  • Uninstalled server 2008 now router won't handle DHCP

    - by john
    My set up is this. server behind router, router has a server and switch connected to it with multiple computers. router used to serve DHCP and DNS, a couple of days ago installed AD, DNS and DHCP on the server, and the server gave out IP's. For various reasons we had to uninstall the domain on our server. I removed AD, DHCP and DNS from the roles and set the router back to serving DHCP and DNS. Now I can't get computers on the network. I reset my router back to factory defaults, and if I plug a computer directly into the router I can get a IP address, but all the computers behind the switch can't get an IP address and can't see the router. All my computers say unidentified network, and if I ping the router it says host is unreachable. On the other hand, my wireless devices are just fine and connect no problem. But for desktops, ipconfig /release doesn't release anything and /renew can't find a server to renew on. My router log shows several FIN scans but they are from innocuous websites (google, netgear) and it shows a couple of smurf attacks but they are all from my external IP. Any ideas? the server isn't even connected to the route right now, and all the computers are set for dynamic IP addresses.. I don't know what else to try? Any help?

    Read the article

  • Multiple IPs from one router

    - by ergoen
    I would like to know if it is possible (and if so, how) to configure a router running dd-wrt (or openwrt) to supply connected devices with two ip addresses. The network looks like this: [Internet] | [Router] | | [Comp1] [Comp2] ... My ISP provides me with enough public IP adresses to give all devices on my network one each. The easiest way to set that up is to just use the router as a switch. This will however lead to problems with some LAN based applications. I would still like to use Samba-shares between the computers as well as a vpn server. What I am looking for basically is if it is possible to use the router as a DHCP server for a local network (let's say giving IP adresses 192.168.1.xx to connected computers) while at the same time passing through public IP addresses to each as well?

    Read the article

  • Mod_security Logging

    - by Hekuran S. Doli
    Im trying to run mod_security as standalone service with nginx as reverse proxy everything works fine except logging. Mod_security logs reverse proxys ip addres instead of clients ip address. I would appreciate if someone can help. The following is an example of logfile where mod_security is logging 127.0.0.1 instead of clients ip address. 2012/08/29 14:18:13 [info] 206862#0: [client 127.0.0.1] ModSecurity: Access denied with code 403 (phase 2). Pattern match ...

    Read the article

  • Setting a subdomain to access home machine with windows remote desktop

    - by ianhales
    I'm trying to remotely connect to home machine through Windows Remote Desktop (amongst other things, but this is currently my primary focus). I can do this fine using my home WAN's static IP (thank god for cable!) with port-forwarding, but I would like to access it from a subdomain of my web-site (e.g. home.mydomain.co.uk). In the cPanel for my hosting account, I've gone into DNS zones and altered the A-record to point to my WAN's IP, which I thought should do the job, but I still cannot connect. When I ping the subdomain, I get my web-host's IP, which I guess is to be expected as I believe the DNS of the host domain is used first, then my server handles the redirection of traffic to the IP in the A-record. Is this the correct idea? Do A-record changes suffer from the same propagation delays as DNS record changes, as I suppose that could explain it? (by the way, this thread confirms my thoughts that setting the A-record should be enough: Hostmonster Subdomain redirected to home server IP: How to ssh into home server using subdomain)

    Read the article

  • Forwarding subdomain to different port on Windows IIS 7

    - by Ralph
    I have a IIS 7 server with Plesk setup on a Windows 2008 R2 server and I have created a subdomain sub1.domain.com, which by default leads to my webserver on port 80, but I don't want that. I want the subdomain to lead to my port 25566 instead (for a Minecraft server), how can I accomplish this? I tried this with host headers / bindings but that resulted in a port already in use warning. How can I do this? How can I make my sub1.domain.com lead to IP.IP.IP.IP:25566? Any help would be greatly appreciated.

    Read the article

  • How do I connect remotely to SQL Server from Windows client?

    - by humble_coder
    Hi All, Having a bit of an issue connecting to SQL SERVER remotely from Windows. I've verified that all of my settings are correct via SQL SERVER MANAGEMENT STUDIO EXPRESS and SQL SERVER CONFIGURATION MANAGER. I can connect remotely using ODBC drivers from other OSes (e.g. OS X, Linux, etc). However, when I connect with the same credentials from a remote Windows machine using "SQL SERVER" as the driver I am told that the system cannot connect. I've tried creating an ODBC Data Source and I get the same error: Connection failed: SQLState: '01000' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(InvalidInstance()). Connection failed: SQLState: '08001' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Invalid Connection From the non-windows machines I can use the IP address of the SQL Server just fine. However, on the remote Windows machine, neither IP address nor named instance works. FYI, I can create an ODBC Data Source using the named instance on the machine actually running the SQL Server (but this is, of course, nothing special -- just proof that it isn't completely hosed). One interesting note: If I use SQL STUDIO 2005 from a Windows client machine, I can use the IP address to connect remotely. Still, the whole reason I bring this up is because I need to use a software package I've written to connect to SQL Server remotely from Windows machines as well. Previously the solution was only needed to xfer data from SQL Server into a PostGRES or MySQL database on non-Windows machines (due to DBA preference). However, now they also want to move the data from the legacy software to MySQL even on Windows. Any assistance would be most appreciated. Feel free to provide a full example connection string. Best

    Read the article

  • Ping reply not getting to LAN machines but getting in Linux router Gateway

    - by Kevin Parker
    I have configured Ubuntu 12.04 as Gateway machine.its having two interfaces eth0 with ip 192.168.122.39(Static) and eth1 connected to modem with ip address 192.168.2.3(through DHCP). ip-forwarding is enabled in router box. Client machine is configured as: ip address 192.168.122.5 and gateway 192.168.122.39 Client machines can ping router box(192.168.122.39).but when pinged 8.8.8.8 reply is not reaching Client machines but in the tcpdump output on gateway i can see echo request for 8.8.8.8 but never echo reply.Is this because of 122.5 not forwarding request to 2.0 network.Can u please help me in fixing this.

    Read the article

  • iptables, allow access from certain MAC addresses

    - by user788171
    Presently, I limit which clients can access my server by using IP addresses via iptables, only approved IP addresses can connect. However, the problem with this is if a client is on a laptop and goes to a different location, they can no longer connect because the IP has changed. For a variety of reasons, iptables authentication is the only option I have. Is there a way to restrict access by device instead of ip address. For instance, only allow certain MAC address to connect to port 5000. Is it possible to do this via iptables? Note, the computers are not on the same network, they could be connecting from anywhere in the world.

    Read the article

  • Why is REMOTE_ADDR only sometimes available as an Apache environment variable?

    - by Xiong Chiamiov
    To avoid having to parse X-Forwarded-For in Varnish, I'm trying to just set a header on the SSL terminator (currently Apache) that stores the direct client IP in a header. On our development machine, this works: RequestHeader set X-Foo %{REMOTE_ADDR}e However, in staging it doesn't. Specifically, the header is empty, as illustrated by both varnishlog: 13 TxHeader b X-Foo: (null) (On the development machine, this shows the IP address as expected.) Similarly, logging REMOTE_ADDR shows that it only appears to be populated on the dev machine: # Config LogFormat "%{X-Forwarded-For}i %{REMOTE_ADDR}e" combined CustomLog "/var/log/httpd/access_log" combined # Log file, staging <my ip> - # Log file, development <my ip> <my ip> Since the dev machine is, well, a dev machine, it is different in a number of ways; however, I can't track down which difference is causing this. The versions of Apache are the same (2.2.22), and I don't see anything relevant in any of the standard config files or /etc/sysconfig/httpd. And the rest of the system is reasonably similar, since they're built off the same CentOS 5 base image. I can't even tell from the Apache documentation whether REMOTE_ADDR is expected to exist or not as an environment variable, but it clearly works on one machine, whether by fluke or design, and the inconsistency is driving me mad.

    Read the article

  • Squid3 not working. Access denied.

    - by Nitish
    I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

    Read the article

  • How to stop live network traffic displayed in terminal?

    - by Jakobud
    For our network we are working on building a new firewall box and we just installed Smoothwall on it to test it out. When I start up the box, before the login prompt even appears, all of the live IP traffic is appearing in the terminal (source/destination IPs, MACs, Ports, etc). I wait for the boot sequence to finish, but all I see is this IP traffic. The login prompt never comes up. I finally get sick of waiting and press CTRL + C and it says "Entering Run Level 3" and then I get a login prompt finally. Once I login, the IP traffic continues to fly through the terminal even as I'm trying to type commands. How do I turn this stuff off? Is this the default setting for Smoothwall to have all this IP traffic going by on the screen? It essentially renders using the terminal to being useless.

    Read the article

  • Windows Server 2003: Nat Port Forwarding Not Working

    - by jM2.me
    The setup is following: Internet (108.99.XXX.XX) <- Windows Server 2003 (10.0.0.1) <- Switch <- Office Computers (10.0.0.100-200 some static routes some manual some automatic) Windows Server has NAT installed on it and two network interfaces are configured properly. The problem is, whenever I try to forward port 80 (or any other) from office computer (lets say 10.0.0.100), it fails. Nic #1 Settings: All settings are obtained from ISP Nic #2 Settings: Set manually IP: 10.0.0.1 Mask: 255.255.255.0 Nat Server is configured to automatically assign IP addresses to private network. Settings are: IP: 10.0.0.0 Mask: 255.255.255.0 Forwarding was done in Routing and Remote Access (local) - IP Routing - NAT/Basic Firewall - Local Area Connection (right click_properties) - services and ports - Web Server HTTP - Private Address: 10.0.0.100 SO what is causing the problem of failure to forward any port from other computer inside private network?

    Read the article

  • Hyper-V VM guest can't ping any machine

    - by Haadka
    So I got Host: Hyper-v enabled machine with four NICs, only one enabled. Network type: External IP configuration are correct for both host and guest (getting it from the DHCP of the company network) The same configuration works on a machine with single NIC But With this other machine, with 4 NICs, there is no Internet in the guest, actually it can't ping any IP expect the host (pings host IP only, not the name) I searched the Internet and did every solution, more than once, with no success.

    Read the article

  • Routing WIFI and LAN for specific traffic

    - by jakebird451
    I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing.

    Read the article

  • How do i Setup a Mac OS X Server - NameServer behind an Airport Extreme?

    - by basilmir
    I have a Mac mini server i want to setup to host a couple of things. My setup is as follows: The WAN connection (static IP and ISP nameservers) goes into the wan port of the Airport Extreme. The Mac mini server is connected to one of the ethernet ports. The mac mini will host my domain something.com. My settings so far: Airport Express gets: 96.x.x.x as the external static IP from the ISP 174.y.y.y as the nameserver Mac mini server always gets a reserved DHCP IP from the Airport Express: 10.0.1.3 is the server's ip 10.0.1.1 as the dns (this ip is the airport express itself) My dns server has an A record pointing to ns.something.com and a PTR doing the reverse. I've already added my 96.x.x.x to point ns.something.com with my registrar as attached. NOW: Nobody seems to be able to access my ns.something.com to resolve any of my records. From a any computer in my network I CAN see my ns and everything works. The outside on the other hand does not... it's as if the airport extreme which "holds" the exterior 94.x.x.x address doesn't pass DNS along to my 10.0.1.3 ns server. I have the server managing the airport. Isn't this supposed to work?

    Read the article

  • Nginx https rewrite turns POST to GET

    - by x7311
    My proxy server runs on ip A and this is how people access my web service. The nginx configuration will redirect to a virtual machine on ip B. For the proxy server on IP A, I have this in my sites-available server { listen 443; ssl on; ssl_certificate nginx.pem; ssl_certificate_key nginx.key; client_max_body_size 200M; server_name localhost 127.0.0.1; server_name_in_redirect off; location / { proxy_pass http://10.10.0.59:80; proxy_redirect http://10.10.0.59:80/ /; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } server { listen 80; rewrite ^(.*) https://$http_host$1 permanent; server_name localhost 127.0.0.1; server_name_in_redirect off; location / { proxy_pass http://10.10.0.59:80; proxy_redirect http://10.10.0.59:80/ /; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } The proxy_redirect was taken from how do I get nginx to forward HTTP POST requests via rewrite? Everything that hits the public IP will hit 443 because of the rewrite. Internally, we are forwarding to 80 on the virtual machine. But when I run a python script such as the one below to test our configuration import requests data = {'username': '....', 'password': '.....'} url = 'http://IP_A/api/service/signup' res = requests.post(url, data=data, verify=False) print res print res.json print res.status_code print res.headers I am getting a 405 Method Not Allowed. In nginx we found that when it hit the internal server, the internal nginx was getting a GET request, even though in the original header we did a POST (this was shown in the Python script). So it seems like rewrite has problem. Any idea how to fix this? When I commented out the rewrite, it hits 80 for sure, and it went through. Since rewrite was able to talk to our internal server, so rewrite itself has no issue. It's just the rewrite dropped POST to GET. Thank you! (This will also be asked on Nginx forum because this is a critical blocker...)

    Read the article

  • Why does windows (file) explorer try to connect to port 80 (http) instead just using smb?

    - by Erik
    Background: On an almost freshly installed pc I get a message along the lines of : "windows cannot find some-file-server-name. Check the spelling and try again"... when trying to access any fileshare. Troubleshooting so far: pinging works. Both by ip and by name the almost identical pc next to this one can access the file server everyone else can access the file server the pc in question can not access other open fileshares but it can connect to the internet And now for what I think is the interesting part: running wireshark with ip.addr == local.ip.add.ress and ip.addr == server.ip.add.ress tells me that it tries to connect over http. the server replies but after a few messages back and forth it stops the other machine of course just uses smb I guess port 80 just means it defaults to webdav, but I haven't been able to find anything that can cause this. Googling it the closest thing I found was this http://www.techrepublic.com/article/get-vista-and-samba-to-work/6353849 but then again this was an XP pc and I wasn't able to connect to other native Windows shares (and I tried the solution anyway and it didn't work.)

    Read the article

  • Nagios: Is it possible to have multiple IPs for a host?

    - by Aknosis
    In our office we have dual WAN setup, if our cable connection drops we still get connectivity via our T1. The only issue is that our office network is no longer available on the same IP so all Nagios check go critical because they can't connect. What'd be awesome is if I could have Nagios try IP 1 by default but if for some reason its failing on that IP try IP 2. I doubt this is possible with a default install but I'm wondering if there is any add-ons or some other magic that could make this work?

    Read the article

  • Localhost service accessible from remote address

    - by dynback.com
    I have on my home Windows box - Cassini server with localhost:10000. And I want it be accessible in internet by my static IP. Tried netcat, "nc -l -p 10001 localhost 10000". But it results in "invalid connection to [IP] from [IP] 16074" Also before that it was working on Opera Unite properly, but now only writes a message: "An error occured. See error log for details". I dont know where to get that log.

    Read the article

< Previous Page | 125 126 127 128 129 130 131 132 133 134 135 136  | Next Page >