Search Results

Search found 511 results on 21 pages for 'andrz 001'.

Page 13/21 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Problem setting up DL360G5 with scsi RAID

  - by ernelli

  I have a problem with reinstalling OS on a DL360G5. The BIOS [F9] do not detect any disc controllers and the HP SmartSetup did not find any compatible controllers. Inside the server, the two SCSI disks are conncted to a RAID controller using BCM8603 chipset. How is disc contoller supposed to be setup? I have tried to do a full BIOS reset. EDIT At the moment we suspect that the Smart Array controller E200i/412205-001 is broken. Are there any status LED's that indicate failure or success during start up? At the moment all LED's are off.

  Read the article

• configuring USB modem( Huawei EC156) in ubuntu 13.10

  - by user205427

  I am facing difficulty in installing my USB modem in Ubuntu 13.10. Contrary to what many have suggested,it does not get detected automatically, nor does setting a new connection help. USB Device is listed in lsusb, but not under network manager or Devices, it is detected as a CD-ROM, what I understood from the web was that usb-modeswitch can be used to switch it to a USB device. Even 'Enable Mobile Broadband' option is not shown in network manager. What was interesting is when I start laptop with windows 7 and use the USB modem and after that restart with Ubuntu, both Enable Broadband and the mobile broadband connection can be seen. Sadly, internet connection could not be installed. I tried using USB-modeswitch command as suggested somewhere, but it does not seem to work. Following is the message. Take all parameters from the command line * usb_modeswitch: handle USB devices with multiple modes * Version 2.0.1 (C) Josua Dietze 2013 * Based on libusb1/libusbx ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1505 HuaweiMode=1 NeedResponse=0 InquireDevice enabled (default) Look for default devices ... found USB ID 8087:0020 found USB ID 1d6b:0002 found USB ID 0461:4db6 found USB ID 12d1:1505 vendor ID matched product ID matched found USB ID 138a:0007 found USB ID 03f0:231d found USB ID 8087:0020 found USB ID 1d6b:0002 Found devices in default mode (1) Access device 005 on bus 001 Get the current device configuration ... OK, got current device configuration (1) Use interface number 0 Use endpoints 0x08 (out) and 0x87 (in) Inquire device details; driver will be detached ... Looking for active driver ... OK, driver detached INQUIRY message failed (error -9) USB description data (for identification) ------------------------- Manufacturer: HUA?WEI TECHNOLOGIES Product: HUAWEI Mobile Serial No.: ??????????????????? ------------------------- Send old Huawei control message ... -> Run lsusb to note any changes. Bye! I am stuck with this problem for 4 days now, any help would be appreciated

  Read the article

• BugZilla XML RPC Interface

  - by Damo

  I am attempting to setup BugZilla to receive but reports from another system using the XML-RPC interface. BugZilla works fine on its own with its own interface. When I attempt to test the XML-RPC functionality by accessing "xmlrpc.cgi" in my browser I get the error: The XML-RPC Interface feature is not available in this Bugzilla at C:\BugZilla\xmlrpc.cgi line 27 main::BEGIN(...) called at C:\BugZilla\xmlrpc.cgi line 29 eval {...} called at C:\BugZilla\xmlrpc.cgi line 29 Following this I install test-taint package from the default perl repository, this installs version 1.04. Re-running "xmlrpc.cgi" gives me an IIS error: 502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server. So I run the checksetup.pl which inform me that: Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Installing Test-Taint from CPAN is the same. I assume XML-RPC is relent on Test-Taint, but Test-Taint doesn't seem to run correctly. If I ignore this error and attempt to invoke "bz_webservice_demo.pl" to add an entry the script times out. How can I get the XML-RPC / Test-Taint function working ? Current Setup: IIS7.5 on Windows Server 2008 Bugzilla 4.2.2 Perl 5.14.2 C:\BugZilla>perl checksetup.pl Set up gcc environment - 3.4.5 (mingw-vista special r3) * This is Bugzilla 4.2.2 on perl 5.14.2 * Running on Win2008 Build 6002 (Service Pack 2) Checking perl modules... Checking for CGI.pm (v3.51) ok: found v3.59 Checking for Digest-SHA (any) ok: found v5.62 Checking for TimeDate (v2.21) ok: found v2.24 Checking for DateTime (v0.28) ok: found v0.76 Checking for DateTime-TimeZone (v0.79) ok: found v1.48 Checking for DBI (v1.614) ok: found v1.622 Checking for Template-Toolkit (v2.22) ok: found v2.24 Checking for Email-Send (v2.16) ok: found v2.198 Checking for Email-MIME (v1.904) ok: found v1.911 Checking for URI (v1.37) ok: found v1.59 Checking for List-MoreUtils (v0.22) ok: found v0.33 Checking for Math-Random-ISAAC (v1.0.1) ok: found v1.004 Checking for Win32 (v0.35) ok: found v0.44 Checking for Win32-API (v0.55) ok: found v0.64 Checking available perl DBD modules... Checking for DBD-Pg (v1.45) ok: found v2.18.1 Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for DBD-SQLite (v1.29) ok: found v1.33 Checking for DBD-Oracle (v1.19) ok: found v1.30 The following Perl modules are optional: Checking for GD (v1.20) ok: found v2.46 Checking for Chart (v2.1) ok: found v2.4.5 Checking for Template-GD (any) ok: found v1.56 Checking for GDTextUtil (any) ok: found v0.86 Checking for GDGraph (any) ok: found v1.44 Checking for MIME-tools (v5.406) ok: found v5.503 Checking for libwww-perl (any) ok: found v6.02 Checking for XML-Twig (any) ok: found v3.41 Checking for PatchReader (v0.9.6) ok: found v0.9.6 Checking for perl-ldap (any) ok: found v0.44 Checking for Authen-SASL (any) ok: found v2.15 Checking for RadiusPerl (any) ok: found v0.20 Checking for SOAP-Lite (v0.712) ok: found v0.715 Checking for JSON-RPC (any) ok: found v0.96 Checking for JSON-XS (v2.0) ok: found v2.32 Use of uninitialized value in open at C:/Perl/site/lib/Test/Taint.pm line 334, <DATA> line 558. Checking for Test-Taint (any) ok: found v1.04 Checking for HTML-Parser (v3.67) ok: found v3.68 Checking for HTML-Scrubber (any) ok: found v0.09 Checking for Encode (v2.21) ok: found v2.44 Checking for Encode-Detect (any) not found Checking for Email-MIME-Attachment-Stripper (any) ok: found v1.316 Checking for Email-Reply (any) ok: found v1.202 Checking for TheSchwartz (any) not found Checking for Daemon-Generic (any) not found Checking for mod_perl (v1.999022) not found Checking for Apache-SizeLimit (v0.96) not found *********************************************************************** * OPTIONAL MODULES * *********************************************************************** * Certain Perl modules are not required by Bugzilla, but by * * installing the latest version you gain access to additional * * features. * * * * The optional modules you do not have installed are listed below, * * with the name of the feature they enable. Below that table are the * * commands to install each module. * *********************************************************************** * MODULE NAME * ENABLES FEATURE(S) * *********************************************************************** * Encode-Detect * Automatic charset detection for text attachments * * TheSchwartz * Mail Queueing * * Daemon-Generic * Mail Queueing * * mod_perl * mod_perl * * Apache-SizeLimit * mod_perl * *********************************************************************** COMMANDS TO INSTALL OPTIONAL MODULES: Encode-Detect: ppm install Encode-Detect TheSchwartz: ppm install TheSchwartz Daemon-Generic: ppm install Daemon-Generic mod_perl: ppm install mod_perl Apache-SizeLimit: ppm install Apache-SizeLimit Reading ./localconfig... OPTIONAL NOTE: If you want to be able to use the 'difference between two patches' feature of Bugzilla (which requires the PatchReader Perl module as well), you should install patchutils from: http://cyberelk.net/tim/patchutils/ Checking for DBD-mysql (v4.001) ok: found v4.021 Checking for MySQL (v5.0.15) ok: found v5.5.27 WARNING: You need to set the max_allowed_packet parameter in your MySQL configuration to at least 3276750. Currently it is set to 3275776. You can set this parameter in the [mysqld] section of your MySQL configuration file. Removing existing compiled templates... Precompiling templates...done. checksetup.pl complete.

  Read the article

• Webcam doesn't work in Ubuntu 12.10

  - by Kzhi

  I have Gembird cam68ut. On my Ubuntu 12.10 it shows black screen in cheese and guvcview. I tested it in win7, it works fine. Here what I found: It is a uvc compliant camera, I checked on the site: 18ec:3299 USB 2.0 PC Camera (model number QC3231) ArkMicro This webcam is report by lsusb: Bus 001 Device 004: ID 18ec:3299 Arkmicro Technologies Inc. Here is the output of dmesg | tail: uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3299) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input17 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) When I run cheese (or guvcview), here what I get in terminal: libv4l2: error turning on stream: No space left on device (cheese:11797): cheese-WARNING **: Internal data flow error. I tried it on different usb slots with the same results The Webcam's microphone works, I can record audio with it Guys, any thoughts on what can be done to make it work?

  Read the article

• ARM Debian (squeeze) USB driver with mismatch 3.3.3 kernel but /lib/modules/2.6.36

  - by frank

  Hei guys, my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0 lsusb shows correctly: Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory in the /lib/modules/ Folder there is instead a 2.6.36-Folder uname -r gives 3.3.3 How can I overcome this mismatch? Can I create a symlink? I can't flash this embedded device since it is deployed somewhere, only ssh? Please advise!

  Read the article

• Rename multiple files as "Modified Date/Time" using cmd or Powershell

  - by Mehper C. Palavuzlar

  I have hundreds of JPG files in a folder. I want to rename each file so that the file name is replaced with "Modified Date/Time" of that file, namely DD.MM.RRRR.HH.MM.jpg. For example, Before After 001.jpg 11.01.2011.16.58.jpg 002.jpg 12.01.2011.09.32.jpg 003.jpg 14.01.2011.12.41.jpg ... ... Since colon (:) cannot be used in file names, the colon between HH and MM must be replaced with a period. I don't want to use a 3rd party tool. Can you provide me with the code to achieve this in Powershell or command line?

  Read the article

• Can't connect to Wireless Network - Ubuntu 12.04 LTS & Sabrent A111N USB Dongle

  - by Ohgodwhy

  I've been trying to connect to this network for quite some time. I can't directly connect to the router with a Wire, but can access the Router with other wireless devices without any issues. I had previously tried several other Wifi nic's but none of them would load properly. Today, i went and bought a new (supported) Sabrent A111N USB Dongle, which said explicitly that it works with Linux 2.4 +. I popped the Dongle in, and low-and-behold it immediately said that there were Available Wireless Connections. I selected my connection and tried to connect, but it just loops constantly while saying Wireless Disconnected then attempts to connect again over and over. ifconfig and iwconfig both show my device in a ready and working state. However, iwlist wlan0 scan says that there are no results found. I don't get it... At one point, I could see the CPU in the DHCP client list under the router, but it doesn't fully make the connection (something about a timeout?). Any help would be appreciated. Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

  Read the article

• Issue about mapping MAC address to Ipv6 address

  - by deepsky

  I know that the address in ipv6 with prefix range 001 to 111 should use a 64-bit interface identifier that follows the EUI-64 format, which translates the MAC to ipv6 as below. MAC:00-02-b3-1e-83-29 --> 02-02-b3-ff-fe-1e-83-29 --->ipv6 addr: fe80::202:b3ff:fe1e:8329 Then I checked my network status with ipconfig /all on my windows XP, but it seems my ipv6 address doesn't follow the above rule: MAC:00-24-81-XX-XX-XX ipv6 addr:2001:da8:8006:225:0:24:81XX:XXXX Obviously it doesn't follow the EUI-64 format. Instead it just directly use the MAC as the last 8 bytes. Anyone know the reason? Pls Correct me if I am wrong.

  Read the article

• merge two parts of pdf in one

  - by Yurij73

  I have two searchable pdf documents say even.pdf and odd.pdf which contains respectively even and odd pages of a book. I can decompile each pdf to separate files 001.pdf 002.pdf oo3.pdf ....The question is how to merge them? They are both even and odd sequences numbered 1,2,3. If it where other numbering on decompile stage with pdftk for even 1,3,5 and for odd 2,4,6 instead of existing order 1,2,3, 4.. i coulde simple merge them, but i ignore this method of numbering with pdftk. May be i need to do the task in other way?

  Read the article

• Close lid option "Do nothing" absent

  - by Jaap

  I just unpacked my new Sony Vaio, with windows 8 pro installed. Everything is nice, so I tried setting my power management options. The "When I close the lid" option only list: Hibernate Sleep Shutdown The "Do nothing" option is not present. I've seen loads of stuff on google where people ask or explain how to set this option to "Do nothing", but in all my power plans this option is absent... Can I use a tool to prevent this, or is there a way to force windows to show me this option (and that it actually works)? UPDATE powercf /q guid gives me this output: Subgroup GUID: 4f971e89-eebd-4455-a8de-9e59040e7347 (Power buttons and lid) GUID Alias: SUB_BUTTONS Power Setting GUID: 5ca83367-6e45-459f-a27b-476b1d01c936 (Lid close action) GUID Alias: LIDACTION Possible Setting Index: 000 Possible Setting Friendly Name: Sleep Possible Setting Index: 001 Possible Setting Friendly Name: Hibernate Possible Setting Index: 002 Possible Setting Friendly Name: Shut down Current AC Power Setting Index: 0x00000000 Current DC Power Setting Index: 0x00000000 Other sections have different enumerations where 000 stands for No action

  Read the article

• What Is The Formula for the 3 of 9 Bar Code Alphabet?

  - by Chris Moschini

  Background: 3 of 9 Barcode Alphabet A simple syntax for 3 of 9 bar codes What is the formula behind the alphabet and digits in a 3 of 9 bar code? For example, ASCII has a relatively clear arrangement. Numbers start at 33, capitals at 65, lowercase at 97. From these starting points you can infer the ASCII code for any number or letter. The start point for each range is also a multiple of 32 + 1. Bar codes seem random and lacking sequence. If we use the syntax from the second link, this is the first six characters in 3 of 9: A 100-01 B 010-01 C 110-00 D 001-01 E 101-00 F 011-00 I see no pattern here; what is it? I'm as much interested in the designer's intended pattern behind these as I am in someone devising an algorithm of their own that can give you the above code for a given character based on its sequence. I struggled with where to put this question; is it history, computer science, information science? I chose Programmers because a StackExchange search had the most barcode hits here, and because I wanted to specifically relate it to ASCII to explain what sort of formula/explanation I'm looking for.

  Read the article

• HP Proliant DL160 G6 - Hardware RAID card to get? [closed]

  - by zhuanyi

  I have bought a DL160 G6 server (Product number: 490427R-001 ) and it does not come with a hardware RAID card. I am trying to set up a VMWare Esxi server and as such I would need a hardware RAID card. I am just wondering if there is any card that would fit into the chassis? Would a P200i fits? How about a P400? Also, would there be any non-HP RAID card that will do the magic too? I have 4 SATA 160GB hard drives already plugged in. Thanks a lot!

  Read the article

• How to use a D-Link usb network adapter on debian

  - by Barranka

  I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

  Read the article

• USB webcam just works once and next time I've to reboot

  - by user30262

  I'm using Ubuntu 9.10, and a usb webcam that is shown as 'Bus 001 Device 005: ID 0ac8:3450 Z-Star Microelectronics Corp.' by lsusb. The problem is that on connecting the cam, it just works with the first program I start (skype, tokbox, messenger), and if I disconnect it or switch to another program, it stops to work and I have to restart my computer to make it work again. Has anyone else noticed this behaviour? Is there some good solution to reset the camera without rebooting to make it work again?

  Read the article

• How could I compress a folder into splitted archives (individual ZIPs)?

  - by Shiki

  I have to compress folders into ZIP packages. But the size is limited, only a ~10-15mb is allowed to used per package. Every major application comes with the "Split archive to..." option, which does what I want... except I can't uncompress them one-by-one. (You need them all, and then use the .7z, .rar, .zip file to uncompress.) Here is an example. FolderX is 35 mb. That makes 4 packages, 4 zip files. The normal split function would give me: folderx.zip, folderx.zip.001, folderx.zip.002, folderx.zip.003 What I would really need is: folderx_1.zip, folderx_2.zip, folderx_3.zip, folderx_4.zip (Individually uncompressable files/packs.) I can code this down into an app, but it's a waste of time if such a utility already exists.

  Read the article

• Why isn't this javascript with else if working?

  - by Uni

  I'm sorry I can't be any more specific - I have no idea where the problem is. I'm a total beginner, and I've added everything I know to add to the coding, but nothing happens when I push the button. I don't know at this point if it's an error in the coding, or a syntax error that makes it not work. Basically I am trying to get this function "Rip It" to go through the list of Dewey decimal numbers, change some of them, and return the new number and a message saying it's been changed. There is also one labeled "no number" that has to return an error (not necessarily an alert box, a message in the same space is okay.) I am a total beginner and not particularly good at this stuff, so please be gentle! Many thanks! <!DOCTYPE html> <html> <head> <script type="text/javascript"> function RipIt() { for (var i = l; i <=10 i=i+l) { var dewey=document.getElementById(i); dewey=parseFloat(dewey); if (dewey >= 100 && 200 >= dewey) { document.getElementById('dewey'+ 100) } else if (dewey >= 400 && 500 >= dewey) { document.getElementById('dewey'+ 200) } else if (dewey >= 850 && 900 >= dewey) { document.getElementById('dewey'-100) } else if (dewey >= 600 && 650 >= dewey) { document.getElementById('dewey'+17) } } } </script> </head> <body> <h4>Records to Change</h4> <ul id="myList"> <li id ="1">101.33</li> <li id = "2">600.01</li> <li id = "3">001.11</li> <li id = "4">050.02</li> <li id = "5">199.52</li> <li id = "6">400.27</li> <li id = "7">401.73</li> <li id = "8">404.98</li> <li id = "9">no number</li> <li id = "10">850.68</li> <li id = "11">853.88</li> <li id = "12">407.8</li> <li id = "13">878.22</li> <li id = "14">175.93</li> <li id = "15">175.9</li> <li id = "16">176.11</li> <li id = "17">190.97</li> <li id = "18">90.01</li> <li id = "19">191.001</li> <li id = "20">600.95</li> <li id = "21">602.81</li> <li id = "22">604.14</li> <li id = "23">701.31</li> <li id = "24">606.44</li> <li id = "25">141.77</li> </ul> <b> </b> <input type="button" value="Click To Run" onclick="RipIt()"> <!-- <input type="button" value="Click Here" onClick="showAlert();"> --> </body> </html>

  Read the article

• Hard Disk DRDY error: is it a crash

  - by pranjal

  I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

  Read the article

• Printing fails after first print with Centos 6 and HP LaserJet P3015dn printer

  - by Gavin Simpson

  Centos 6 recognises and configures a HP LaserJet P3015dn printer connected via USB. This machine is being configured as a small group file/print server. I can print a test page, which is processed/printed correctly. The next time printing is attempted (say printing a second test page), the page is not printed and the printer is set to disabled. The status of the printer is stated as: Stopped - /usr/lib/cups/backend/hp failed in the printer configuration dialogue. /var/log/cups/error_log contains this information (first two lines were there prior to the failed print job) E [24/Jun/2004:09:12:57 +0100] Returning HTTP Forbidden for Resume-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost E [24/Jun/2004:09:20:59 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost D [24/Jun/2004:09:37:28 +0100] [Job 28] The following messages were recorded from 09:36:43 AM to 09:37:28 AM D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding start banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding end banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] File of type application/vnd.cups-banner queued by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] hold_until=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Queued on "HP-LaserJet-P3010-Series" by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] job-sheets=none,none D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[0]="HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[1]="28" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[2]="gavin" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[3]="Test Page" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[4]="1" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[5]="job-uuid=urn:uuid:b3370a97-4ab6-3451-40a2-6239b13fa3e1 job-originating-host-name=localhost" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[6]="/var/spool/cups/d00028-001" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[0]="CUPS_CACHEDIR=/var/cache/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[1]="CUPS_DATADIR=/usr/share/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[2]="CUPS_DOCROOT=/usr/share/cups/www" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[5]="CUPS_SERVERBIN=/usr/lib/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[6]="CUPS_SERVERROOT=/etc/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[7]="CUPS_STATEDIR=/var/run/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[8]="HOME=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[10]="[email protected]" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[11]="SOFTWARE=CUPS/1.4.2" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[12]="TMPDIR=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[13]="USER=root" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[15]="CUPS_ENCRYPTION=IfRequested" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[16]="IPP_PORT=631" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[17]="CHARSET=utf-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[18]="LANG=en_US.UTF-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[19]="PPD=/etc/cups/ppd/HP-LaserJet-P3010-Series.ppd" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[20]="RIP_MAX_CACHE=8m" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[21]="CONTENT_TYPE=application/vnd.cups-banner" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[22]="DEVICE_URI=hp:/usb/HP_LaserJet_P3010_Series?serial=VNBV993GM4" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[23]="PRINTER_INFO=Hewlett-Packard HP LaserJet P3010 Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[24]="PRINTER_LOCATION=electra.geog.ucl.ac.uk" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[25]="PRINTER=HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[26]="CUPS_FILETYPE=document" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript" D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/bannertops (PID 2858) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/pstops (PID 2859) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started backend /usr/lib/cups/backend/hp (PID 2860) D [24/Jun/2004:09:37:28 +0100] [Job 28] load_banner(filename="/var/spool/cups/d00028-001") D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_comments - %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%BoundingBox: 12 12 600 780 D [24/Jun/2004:09:37:28 +0100] [Job 28] %cupsRotation: 0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Creator: bannertops/CUPS v1.4.2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%CreationDate: Thu 24 Jun 2004 09:36:43 AM BST D [24/Jun/2004:09:37:28 +0100] [Job 28] %%LanguageLevel: 2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentData: Clean7Bit D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Title: (Test Page) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%For: (gavin) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Pages: 1 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentSuppliedResources: font Monospace D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Bold D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-BoldOblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Oblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%EndComments D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_prolog - %%BeginProlog D [24/Jun/2004:09:37:28 +0100] [Job 28] STATE: +connecting-to-device D [24/Jun/2004:09:37:28 +0100] [Job 28] prnt/backend/hp.c 762: ERROR: cannot open channel PRINT D [24/Jun/2004:09:37:28 +0100] [Job 28] Backend returned status 1 (failed) D [24/Jun/2004:09:37:28 +0100] [Job 28] Printer stopped due to backend errors; please consult the error_log file for details. D [24/Jun/2004:09:37:28 +0100] [Job 28] End of messages D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state=5(stopped) D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-message="/usr/lib/cups/backend/hp failed" D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-reasons=paused /var/log/messages contains the following reports associated with the recognition of the printer and the failed print job: Jun 24 09:35:07 electra kernel: usb 1-8: new high speed USB device using ehci_hcd and address 2 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device found, idVendor=03f0, idProduct=8d17 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 24 09:35:07 electra kernel: usb 1-8: Product: HP LaserJet P3010 Series Jun 24 09:35:07 electra kernel: usb 1-8: Manufacturer: Hewlett-Packard Jun 24 09:35:07 electra kernel: usb 1-8: SerialNumber: VNBV993GM4 Jun 24 09:35:07 electra kernel: usb 1-8: configuration #1 chosen from 1 choice Jun 24 09:35:07 electra kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x8D17 Jun 24 09:35:07 electra kernel: usbcore: registered new interface driver usblp Jun 24 09:35:07 electra udev-configure-printer: invalid or missing IEEE 1284 Device ID Jun 24 09:35:08 electra hp[1942]: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:09 electra python: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:51 electra kernel: usblp0: removed Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 254: unable to read Dot4ReverseReply data: Resource temporarily unavailable exp=2 act=0 Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 330: invalid DOT4InitReply: cmd=0, result=20#012, revision=0 Jun 24 09:37:28 electra hp[2860]: prnt/backend/hp.c 762: ERROR: cannot open channel PRINT I am now at a loss as to how to proceed to get this printer working on my Centos machine. How can I configure the machine to print more than a single print job without needing to be unplugged/plugged in repeatedly?

  Read the article

• Connect ps/2->usb keyboard to linux?

  - by Daniel

  I have a lovely ancient ergonomic keyboard (no name SK - 6000) connected via a DIN-ps/2 adapter to a ps/2-usb adapter to my docking station. After Grub it stops working. It takes either suspending and waking up or replugging it while Linux is running to get it to work. No extra kernel modules get loaded for this. When it works and I restart without power off, it will work immediately. Even when it does not work, it is visible (lsusb device number varies but output is identical whether working or not): $ lsusb -v -s 001:006 Bus 001 Device 006: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0a81 Chesen Electronics Corp. idProduct 0x0205 PS/2 Keyboard+Mouse Adapter bcdDevice 0.10 iManufacturer 1 CHESEN iProduct 2 PS2 to USB Converter iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 2 PS2 to USB Converter bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 64 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 148 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) $ ll -R /sys/bus/hid/drivers/ /sys/bus/hid/drivers/: total 0 drwxr-xr-x 2 root root 0 Jul 8 2012 generic-usb/ /sys/bus/hid/drivers/generic-usb: total 0 lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:046D:C03D.0003 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C03D.0003/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0001 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/ lrwxrwxrwx 1 root root 0 Jul 7 23:33 0003:0A81:0205.0002 -> ../../../../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:0A81:0205.0002/ --w------- 1 root root 4096 Jul 7 23:32 bind lrwxrwxrwx 1 root root 0 Jul 7 23:33 module -> ../../../../module/usbhid/ --w------- 1 root root 4096 Jul 7 23:32 new_id --w------- 1 root root 4096 Jul 8 2012 uevent --w------- 1 root root 4096 Jul 7 23:32 unbind When replugging, dmesg shows this (which except for the 1st line and different input numbers already came at boot time): [ 1583.295385] usb 1-1.2.1: new low-speed USB device number 6 using ehci_hcd [ 1583.446514] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input17 [ 1583.446817] generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input0 [ 1583.454764] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/input/input18 [ 1583.455534] generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.0-1.2.1/input1 [ 1583.455578] usbcore: registered new interface driver usbhid [ 1583.455584] usbhid: USB HID core driver So I tried $ sudo udevadm test /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 run_command: calling: test adm_test: version 175 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/lib/udev/rules.d/40-crda.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-fuse.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/40-usb-media-players.rules' as rules file parse_file: reading '/lib/udev/rules.d/40-usb_modeswitch.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/42-qemu-usb.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/69-cd-sensors.rules' as rules file add_rule: IMPORT found builtin 'usb_id', replacing /lib/udev/rules.d/69-cd-sensors.rules:76 ... parse_file: reading '/lib/udev/rules.d/77-mm-usb-device-blacklist.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/85-usbmuxd.rules' as rules file ... parse_file: reading '/lib/udev/rules.d/95-upower-hid.rules' as rules file parse_file: reading '/lib/udev/rules.d/95-upower-wup.rules' as rules file parse_file: reading '/lib/udev/rules.d/97-bluetooth-hid2hci.rules' as rules file udev_rules_new: rules use 271500 bytes tokens (22625 * 12 bytes), 44331 bytes buffer udev_rules_new: temporary index used 76320 bytes (3816 * 20 bytes) udev_device_new_from_syspath: device 0x7f78a5e4d2d0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_new_from_syspath: device 0x7f78a5e5f820 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' udev_device_read_db: device 0x7f78a5e5f820 filled with db file data udev_device_new_from_syspath: device 0x7f78a5e60270 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001' udev_device_new_from_syspath: device 0x7f78a5e609c0 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0' udev_device_new_from_syspath: device 0x7f78a5e61160 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1' udev_device_new_from_syspath: device 0x7f78a5e61960 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2' udev_device_new_from_syspath: device 0x7f78a5e62150 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1/1-1' udev_device_new_from_syspath: device 0x7f78a5e62940 has devpath '/devices/pci0000:00/0000:00:1a.0/usb1' udev_device_new_from_syspath: device 0x7f78a5e630f0 has devpath '/devices/pci0000:00/0000:00:1a.0' udev_device_new_from_syspath: device 0x7f78a5e638a0 has devpath '/devices/pci0000:00' udev_event_execute_rules: no node name set, will use kernel supplied name 'hidraw0' udev_node_add: creating device node '/dev/hidraw0', devnum=251:0, mode=0600, uid=0, gid=0 udev_node_mknod: preserve file '/dev/hidraw0', because it has correct dev_t udev_node_mknod: preserve permissions /dev/hidraw0, 020600, uid=0, gid=0 node_symlink: preserve already existing symlink '/dev/char/251:0' to '../hidraw0' udev_device_update_db: created empty file '/run/udev/data/c251:0' for '/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0' ACTION=add DEVNAME=/dev/hidraw0 DEVPATH=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 MAJOR=251 MINOR=0 SUBSYSTEM=hidraw UDEV_LOG=6 USEC_INITIALIZED=969079051 The later lines sound like it's already there. And none of these awakes the keyboard: $ sudo udevadm trigger --verbose --sysname-match=usb* /sys/devices/pci0000:00/0000:00:1a.0/usb1 /sys/devices/pci0000:00/0000:00:1a.0/usbmon/usbmon1 /sys/devices/pci0000:00/0000:00:1d.0/usb2 /sys/devices/pci0000:00/0000:00:1d.0/usbmon/usbmon2 /sys/devices/virtual/usbmon/usbmon0 $ sudo udevadm trigger --verbose --sysname-match=hidraw0 /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:0A81:0205.0001/hidraw/hidraw0 $ sudo udevadm trigger I also tried this to no avail: # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind ksh: echo: write to 1 failed [No such device] # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/unbind # echo -n 0003:0A81:0205.0001 > /sys/bus/hid/drivers/generic-usb/bind # echo usb1 >/sys/bus/usb/drivers/usb/unbind # echo usb1 >/sys/bus/usb/drivers/usb/bind What else should I try to get the same result as replugging or suspending, by just issuing a command?

  Read the article

• ruby1.9.1 - sqlite3 problem on ubuntu 9.10 x64 (no such file to load -- sqlite3)

  - by doriath

  Hi, I have problem with sqlite3, because it is not working. irb(main):001:0> require 'sqlite3' LoadError: no such file to load -- sqlite3 from (irb):1:in `require' from (irb):1 from /usr/bin/irb:12:in `<main>' I have installed following packages: sudo apt-get install ruby1.9.1-full sudo apt-get install rubygems1.9.1 sudo gem update --system sudo apt-get install sqlite3 libsqlite3-dev sudo gem install sqlite3-ruby sudo apt-get install libopenssl-ruby1.9.1 The applications has following versions: $ ruby --version ruby 1.9.1p243 (2009-07-16 revision 24175) [x86_64-linux] $ sqlite3 --version 3.6.16 $ gem --version 1.3.6 and $ gem list --local *** LOCAL GEMS *** actionmailer (2.3.5) actionpack (2.3.5) activerecord (2.3.5) activeresource (2.3.5) activesupport (2.3.5) ffi (0.6.2) rack (1.0.1) rails (2.3.5) rake (0.8.7) rubygems-update (1.3.6) sqlite3-ruby (1.2.5) What have I missed?

  Read the article

• Relative Resizing of Forms in C#

  - by xarzu

  What is the magic that makes components cling to the edges of a form? I had thought that one must use the resize event of the form and them force each element in the form to resize. But then I saw some sample code which, even when I am editing the form, the elements seem to adhere to a percentage of the space they take up in the form rather than a set diminsion. In other words, when I am editing the form and resizing it, the panels and the parts inside the form bend their shape such that the edges remain a few pixels from the edges. But in my own program I have not been able to find where I can duplicate this feature. When I run my program, this (http://i67.photobucket.com/albums/h292/Athono/microsoft/001.jpg) goes to this (http://i67.photobucket.com/albums/h292/Athono/microsoft/002.jpg)

  Read the article

• How to use LIKE query in sqlite & iPhone

  - by 4thSpace

  I'm using the following for a LIKE query. Is this technique for LIKE correct? selectstmtSearch = nil; if(selectstmtSearch == nil){ const char *sql = "SELECT col1, col2 FROM table1 t1 JOIN table2 t2 ON t1.cityid = t2.cityid where t1.cityname like ?001 order by t1.cityname"; if(sqlite3_prepare_v2(databaseSearch, sql, -1, &selectstmtSearch, NULL) == SQLITE_OK) { sqlite3_bind_text(selectstmtSearch, 1, [[NSString stringWithFormat:@"%%%@%%", searchText] UTF8String], -1, SQLITE_TRANSIENT); } } The problem I'm having is after a few uses of this, I get an error 14 on sqlite3_open(), which is unable to open database. If I replace the LIKE with something such as: SELECT col1, col2 FROM table1 t1 JOIN table2 t2 ON t1.cityid = t2.cityid where t1.cityname = ? order by t1.cityname It works fine. I do open/close the DB before after the above code. Is there a way to troubleshoot exactly why the database can't be opened and what its relationship to my LIKE syntax is?

  Read the article

• xapian-full installed on mac os x snow leopard but failed with dlopen LoadError

  - by goodwill

  Since I have tried to install xapian but failed, I try another alternative with xapian-full. Installation seems goes well, but when I try to write code with that I got toasted with error message again: irb(main):001:0> require 'xapian' LoadError: dlopen(/opt/ruby-enterprise/lib/ruby/gems/1.8/gems/xapian-full-1.1.3.4/lib/_xapian.bundle, 9): Library not loaded: /usr/local/lib/libxapian-1.1.3.dylib Referenced from: /opt/ruby-enterprise/lib/ruby/gems/1.8/gems/xapian-full-1.1.3.4/lib/_xapian.bundle Reason: image not found - /opt/ruby-enterprise/lib/ruby/gems/1.8/gems/xapian-full-1.1.3.4/lib/_xapian.bundle from /opt/ruby-enterprise/lib/ruby/gems/1.8/gems/xapian-full-1.1.3.4/lib/_xapian.bundle from /opt/ruby-enterprise/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:36:in `require' from /opt/ruby-enterprise/lib/ruby/site_ruby/1.8/xapian.rb:40 from /opt/ruby-enterprise/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /opt/ruby-enterprise/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from (irb):1 Anyone know how to solve this?

  Read the article

• How to get image capture date and video duration when uploading files using SWFUpload and Paperclip

  - by Hatem

  Hi Guys, I'm using SWFUpload and Paperclip on Rails 2.3.5 to upload images and videos. How can I store the capture date of images and duration of videos? The following works correctly in irb: irb(main):001:0> File.new('hatem.jpg').mtime => Tue Mar 09 16:56:38 +0200 2010 But when I try to use Paperclip's before_post_process: before_post_process :get_file_info def get_file_info puts File.new(self.media.to_file.path).mtime # =>Wed Apr 14 18:36:22 +0200 2010 end I get the current date instead of the capture date. How can I fix this? Also, how can I get the video duration and store it with the model? Thank you.

  Read the article

• jquery xml select

  - by Geln

  hi, How to select items whose sub-tag key's text starts with '001'? <root> <item> <key>001001</key> <text>thanks</text> </item> <item> <key>001002</key> <text>very</text> </item> <item> <key>002001</key> <text>much</text> </item> </root> $(xml).find("item>[filter string]").each(function() { alert(this); });

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >