Search Results

Search found 545 results on 22 pages for 'atom skaa ska hic'.

Page 13/22 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• low-cost RAID NAS for home use?

  - by gravyface

  Have a noisy, power-hungry Pentium 4 based Ubuntu server that I want to replace with a nice, low-power mini-ITX/Intel Atom-based machine to do my network services (DHCP, DNS, IPSec, Web/mail, FTP, etc.) and am thinking of a (hopefully) equally-low powered NAS using NFS over GbE with at least 1 TB space and a RAID 5 (preferred) or RAID 0 (likely) configuration for redundancy with a couple of spare disks I can swap in as needed down the road. Would I be better off getting a full sized ATX mobo/case and configuring the RAID internally? I really want to keep power consumption down as much as possible as I leave my home server up 24/7.

  Read the article

• Event Viewer: atapi errors

  - by Wesley

  Specs for Samsung N120 Netbook Atom N270 @ 1.60 GHz / 160 GB IDE HDD / 2 GB PC2-5300 DDR2 RAM / Windows XP Home SP3 So I'm still getting some atapi errors in my Event Viewer. Here are two atapi errors I am getting over and over again: (1) The device, \Device\Ide\IdePort0, did not respond within the timeout period. (2) The driver detected a controller error on \Device\Ide\IdePort0. In addition, I am repeatedly getting this warning as well: (1) An error was detected on device \Device\Harddisk0\D during a paging operation. I just got this back from repair, where before, I couldn't boot at all because I was led to a black screen saying "Operating System Not Found". Still, I got it back and it can boot again, without any hard drive replacement or data loss. So, how can I get rid of these errors and warnings? What could have happened during repairs to allow my netbook to boot again? Thanks in advance.

  Read the article

• What is the fastest MD5 sum calculator?

  - by netvope

  I tested the speed of md5sum on a few Ubuntu 8.04 servers Pentium III 700 MHz: 52 MB/s Atom 1.6 GHz, 32-bit: 119 MB/s Core 2 (Yorkfield) 2.5GHz, 32-bit: 194 MB/s Core 2 (Yorkfield) 2.5GHz, 64-bit: 222 MB/s Then I downloaded a tool (by apt-get install) called md5deep and found that it's roughly 20% faster (as tested on the 32-bit Core 2 server). This makes me feel that the "vanilla" md5sum included in Ubuntu isn't the fastest one. Questions: Other than md5deep, are you aware of any MD5 calculators that are potentially faster than md5sum? (Answers for software from other OS are also welcomed.) If I want to compile md5sum myself, where can I download the source? What compiler options would you suggest for the Core 2 server? (note: gcc 4.2.4 in Ubuntu 8.04 does not seem to support -march=core2)

  Read the article

• very long boot up with Ubuntu 10.04.4

  - by wt70707

  I installed Ubuntu 10.04.3 on Atom. Then I do the update and upgrade with: #apt-get update #apt-get upgrade #apt-get dist-upgrade The system can boot up now but in almost 2 minutes. After power on and system test, it will stop at "Verifying DMI pool data" for 10 seconds before the GRUB menu comes up. Then after the choosing of one item, to the start up of OS there is 100 seconds of black screen. The start up after that is normal and the operations in the system is also normal. I am concerned with if it is of hardware problem, or just some problem with the kernel. Also I want to know after "Verifying DMI pool data" what is done? And after we choose an item in GRUB menu, what does the system do? And where can I see the procedure of the whole boot up? The /var/log/boot.log is too simple, and this is it: fsck from util-linux-ng 2.17.2 fsck from util-linux-ng 2.17.2 /dev/mmcblk0p5: clean, ...... /dev/mmcblk0p1: clean, ...... * Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox OK] * Setting sensors limits OK]

  Read the article

• Twitter API Voting System

  - by Richard Jones

  So I blatantly got this idea from the MIX 10 event. At MIX they held a rockband talent competition type thing (I’m not quite sure of all the details).    But the interesting part for me is how they collected votes. They used Twitter (what else, when you have a few thousand geeks available to you). The basic idea was that you tweeted your vote with a # tag, i.e #ROCKBANDVOTE vote Richard How cool….    So the question is how do you write something to collate and count all the votes?   Time to press the magic Visual Studio new Project button… Twitter has a really nice API that can be invoked from .NET.   This is the snippet of code that will search for any given phrase i.e #ROCKBANDVOTE   public static XmlDocument GetSearchResults(string searchfor) { return GetSearchResults(searchfor, ""); }   public static XmlDocument GetSearchResults(string searchfor, string sinceid) { XmlDocument retdoc = new XmlDocument();   try { string url = "http://search.twitter.com/search.atom?&q=" + searchfor; if (sinceid.Length > 0) url += "since_id=" + sinceid; HttpWebRequest request = (HttpWebRequest)WebRequest.Create(url); request.Method = "POST"; request.ContentType = "application/x-www-form-urlencoded"; WebResponse res = request.GetResponse(); retdoc.Load(res.GetResponseStream()); res.Close();   } catch { } return retdoc; } } I’ve got two overloads, that optionally let you pass in the last ID to look for as well as what you want to search for. Note that Twitter rate limits the amount of requests you can send,  see http://apiwiki.twitter.com/Rate-limiting So realistically I wanted my app to run every hour or so and only pull out results that haven’t been received before (hence the overload to pass in the sinceid parameter). I’ll post the code when finished that parses the returned XML.

  Read the article

• The Open Data Protocol

  - by Bobby Diaz

  Well, day 2 of the MIX10 conference did not disappoint.  The keynote speakers introduced the preview release of IE9, which looks really cool and quick, and Visual Studio 2010 RC that is scheduled to RTM on April 12th.  It seemed to have a lot of improvements aimed at making developers more productive.  Here are the current links to these two offerings: Internet Explorer 9 – Platform Preview Visual Studio 2010 and .NET 4 – Release Candidate While both of these were interesting, the demos that really blew me away today centered around the work being done with The Open Data Protocol, or OData for short!  OData is a recommended standard being pushed by Microsoft that uses a REST based interface to interact with various types of data in a uniform manner.  Data producers then provide the data to consumer in either ATOM or JSON formats as requested by the client application. The OData SDK contains client and server libraries for many of the popular languages in use today, including .NET, Java, PHP, Objective C and JavaScript, so you consume or even produce your own OData services.  More information can be found using the following links: OData.org How to navigate an OData compliant service Query Functions (WCF Data Services) Netflix has made available one of the first live OData services by exposing their entire movie catalog.  You can browse and query using URLs similar to the following: http://odata.netflix.com/ http://odata.netflix.com/Catalog/Genres('Horror')/CatalogTitles http://odata.netflix.com/Catalog/CatalogTitles?$filter=startswith(Title/Regular,%20'Star%20Wars')&$orderby=Title/Regular So now I just need to find an excuse reason to start using OData in a real project! Enjoy!

  Read the article

• Fast user switching is logging users off instead of switching users

  - by Nathan Osman

  I have a netbook running Windows 8.1 Pro that will no longer allow more than one user to be logged in at the same time. The steps necessary to reproduce this are as follows: The current user presses WIN to bring up the start screen. The user clicks his name in the corner and a list of other users appears. As soon as one of the other names is clicked, the user is unceremoniously logged off without any prompts. This behavior seems to have started some time after upgrading to Windows 8.1 from Windows 8. Before that point, everything worked fine and more than one user could be logged in at the same time. I've tried searching for others experiencing similar problems but this appears to be unique. System Details: CPU: Intel Atom N455 @ 1.66 GHz RAM: 1 GB OS: Windows 8.1 Pro w/ Media Center 32-bit

  Read the article

• Home ZFS based NAS...What processor/chipset to use?

  - by MrBlargityBlarg

  So, I'm building a home/personal NAS. My plan is to expose both SMB fileshares for sharing files/media between hosts, but also to carve an iSCSI target LUN out of it for use by VMWare as a datastore. I want to use ZFS (software RAID) so that means I'll either be using FreeNAS, Solaris Express, or OpenIndiana. My question is basically: How much horsepower do I need? Obviously I/O is going to be my bottleneck but I want to be sure that I am not limiting my I/O because of a slow processor or chipset. So far the hardware plan is to use an Intel i3 and motherboard with one of the H87, Q87, or Z87 chipsets, a SAS controller (JBOD, no RAID) and if budget allows, I'm also hoping to get an SSD for the ZFS L2ARC and ZIL. Does anyone think I could get away with an Intel Atom or cheaper/less-capable processor/chipset than the i3 and [HQZ]87 listed above?

  Read the article

• Windows XP won't boot after drive transplant

  - by Nathan

  Hi all, I moved my hard drive from my Lenovo laptop into my Asus Eee PC netbook. When I started the netbook, after POST all I got was a black screen with a cursor in the upper left corner. I thought that the migration should work OK because this was a 32-bit version of Windows XP, and the Atom processor in the Asus should support the x86 instruction set. However, I don't know much about Windows, so maybe this was a dumb thought. I did verify that the BIOS can find the drive. It required major surgery to replace the drive, so any solution requiring me to remove the transplant drive is not going to fly. Keeping in mind that the netbook has no optical drive and that I have no other Windows computers (all my other computers run Linux), is there any way I can fix this problem? Thanks! Nathan

  Read the article

• Mini-ITX board for AM3 Athlon X4 600e processor.

  - by Kamil Zadora

  Hello, I am planning to build a PC to control a robotic platform that I am building (about 50% complete). I need more power than ATOM platform could bring, as the robot will need to do on the fly image processing to work as intended. I was considering using Athlon X4 600e as it is rated 45W Maximum output. Probably underclocked it would go lower than 30-35W. I do not I'am at very long battery life, but the 17Ah, 12V battery should keep it running for few hours. My problem is: motherboard. I am space limited so I am looking for a nice mini-itx AM3 motherboard to match the processor. It is hard to find many tests about power usage of the motherboards itself (for example, when using the same processor on different motherboards, test are usualy done in the opposite matter). Could you provide any motherboard examples or suggest what chipset to look for? Thank you in advance.

  Read the article

• Acer aspire one d270 can not set brightness

  - by Marko

  I hope you can help me figure out how to set the brightness at my netbook. Following problem appears since I installed ubuntu 11.10 on my acer: I am not able to adjust the brightness by FN Keys nor manually at "systemsettings-display". After searching with google for a while, I found a way via the terminal to adjust it with the folloqing command: "sudo setpci -s 00:02.0 f4.b=7f" ( from 00-9f). That was a major breakthrough for me as I am still new to Linux OS. But still seeking a way to get the FN keys for brightness to work, I kept searching until I found "askubuntu.com". I read through various Questions by other acer users and tried there solutions, but unfortunately none worked out for me. From this thread: fn + arrow keys don't adjust actual brightness on an Acer Aspire 5740 "sudo gedit /etc/X11/xorg.conf". This command did not work because the file was not found. I also used nano instead of gedit, but the file was empty( I think it just created the file since it did not exist). These commands which i found gave me a boot loop and I had to repair ubuntu: sudo gedit /etc/default/grub Change the line GRUB_CMDLINE_LINUX="" into GRUB_CMDLINE_LINUX="acpi_osi=Linux" sudo update-grub From this post Screen Brightness not adjustable for Acer Aspire S3: I tried the solution from the last post, but it did not work either. Does anyone know what I could try? I would appreciate it, if someone could help me out with this. Thanks in advance Netbook specs: CPU: Intel Atom N2600 Memory: 2gb DDR3 Storage: 320 GB HD GPU: Intel GMA 3600

  Read the article

• 1080p playback on external monitor

  - by xibalban

  My system (netbook) specs: 1.6 GHz dual core atom N2600 2 GB DDR3 RAM Integrated GMA3600 GPU Win 7 Professional 32 Bit Daum Pot Player V-1.5 The issue: I downloaded a 1.33 GB sized 1920 x 1080 HD documentary (file extension: mp4) and it plays without a hitch using pot player. However, when I connected an external display (an LED Full HD 24" monitor) using D-Sub, the video plays fine but the player controls become very unresponsive. For instance, it takes about 40 seconds to exit full screen while playing. I tried: Installed/updated all the latest monitor drivers Updated the VGA drivers for GMA3600 No other programs ran while the video played, with most unwanted services and background processes disabled/killed. CPU usage goes only up to 49% when the video plays Question: What may I do in order to improve the player response/video playback experience? Do I need to play with (or change) Pot Player's default video decoders, etc?

  Read the article

• How to prevent mod_proxy from rewriting redirects into absolute URLs?

  - by Yang

  I have: nginx (port 80) reverse-proxying to apache2 (port 88) reverse-proxying to a web app (port 5001). However, when the web app responds with a redirect like Location: /foo, apache2 rewrites this into Location: http://host.com:88/sub/foo, even though port 88 is publicly inaccessible. I'd like it to just redirect to the relative URL Location: /sub/foo. Any ideas? My apache config (using mod_proxy_http, mod_proxy_html, mod_substitute): <Location /notes/> Allow from all ProxyPass http://127.0.0.1:5001/ SetOutputFilter proxy-html ProxyPassReverse / ProxyHTMLURLMap / /notes/ RequestHeader unset Accept-Encoding AddOutputFilterByType SUBSTITUTE application/atom+xml Substitute "s|127.0.0.1:5001|host.com/notes|" </Location>

  Read the article

• ARM laptop available?

  - by Ken

  Hearing all the fuss about some new consumer product that uses an ARM Cortex A8, I'm interested to get in on some of the action. But I want a real programmable computer running something like Linux. I've seen many, many reports in the past 2 or 3 years about prototype ARM laptops with great battery life. Unfortunately, when I tried googling today, all I can find are the old videos and press releases about the prototypes, not a shipping product. Is there an actual ARM laptop available today? Or did everybody give up and just use Intel Atom chips?

  Read the article

• Hybrid USB Install Method - netboot and iso

  - by Samus Arin

  I was following the steps here ("Preparing Files for USB Memory Stick Booting") https://help.ubuntu.com/10.04/installation-guide/i386/boot-usb-files.html to create a installation usb drive for 12.1. The very first paragraph of the article states "The second is to also copy a CD image onto the USB stick and use that as a source for packages, possibly in combination with a mirror." However, the only instructions mentioned regarding an iso image is to simply copy one somewhere on the drive (after its been made bootable and syslinux, vmlinuz and initrd.gz installed/copied): "you should now copy an Ubuntu ISO image onto the stick." I thought it strange there where no configuration steps for "pointing" the kernel to the iso (like a line in syslinux.cfg or a boot: option or something), but went ahead with the install anyway. I don't think the iso was used at all, it appeared that all the OS files where downloaded during the install process. Therefore, I was wondering if anyone knew how to use this local iso image in this particular installation technique (I know the image can be installed with dd, but thats a different technique), b/c I need to reinstall (I installed unity, but it's wayy to much for my little Atom based netbook) ? Thank you.

  Read the article

• CodePlex Daily Summary for Friday, November 09, 2012

  CodePlex Daily Summary for Friday, November 09, 2012Popular ReleasesPlayer Framework by Microsoft: Player Framework for Windows 8 (v1.0): IMPORTANT: List of breaking changes from preview 7 Ability to move control panel or individual elements outside media player. more info... New Entertainment app theme for out of the box support for Windows 8 Entertainment app guidelines. more info... VSIX reference names shortened. Allows seeing plugin name from "Add Reference" dialog without resizing. FreeWheel SmartXML now supports new "Standard" event callback type. Other minor misc fixes and improvements ADDITIONAL DOWNLOADSSmo...WebSearch.Net: WebSearch.Net 3.1: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. It facilitates the experiments of web search researchers due to its high flexibility and extensibility. The platform can be used or extended by any language compatible for .Net 2 framework, from C# (recommended), VB.Net to C++ and Java. Thanks to the large coverage of knowledge in web search research, it is necessary to model the techniques and main...Umbraco CMS: Umbraco 4.10.0: NugetNuGet BlogRead the release blog post for 4.10.0. Whats newMVC support New request pipeline Many, many bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesWe have done all we can not to break backwards compatibility, but we had to do some minor breaking changes: Removed graphicHeadlineFormat config setting from umbracoSettings.config (an old relic from the 3.x days) U4-690 DynamicNode ChildrenAsList was fixed, altering it'...MySQL Tuner for Windows: 0.3: Welcome to the third beta of MySQL Tuner for Windows! This release fixes bugs in the displaying of numbers, and a crash that occurred due to the program incorrectly closing and disposing of resources, Be warned that there will be bugs in this release, so please do not use on production or critical systems. Do post details of issues found to the issue tracker, and I will endeavour to fix them, when I can. I would love to have your feedback, and if possible your support! Requirements Microso...SharePoint Manager 2013: SharePoint Manager 2013 Release ver 1.0.12.1106: SharePoint Manager 2013 Release (ver: 1.0.12.1106) is now ready for SharePoint 2013. The new version has an expanded view of the SharePoint object model and has been tested on SharePoint 2013 RTM. As a bonus, the new version is also available for SharePoint 2010 as a separate download.GL2DX (OpenGL to DirectX Wrapper Library): GL2DX Release 1: The first release contains all source code for the GL2DX library and source code for the sample project demonstrating how to use the library for a Direct3D / XAML hybrid Windows 8 application.WCF y Net remoting en el famoso ejemplo HOLA MUNDO: Ejemplo: Versión liberadaD3D9Client: D3D9Client R7: New release for Orbiter 2010-P1 - Added horizon/sun angle for night-lights into the configuration file (default 10deg) - Some runway lights related bugs are fixed - Added more configuration options for runway lightsFiskalizacija za developere: FiskalizacijaDev 1.2: Verzija 1.2. je, prije svega, odgovor na novu verziju Tehnicke specifikacije (v1.1.) koja je objavljena prije nekoliko dana. Pored novosti vezanih uz (sitne) izmjene u spomenutoj novoj verziji Tehnicke dokumentacije, projekt smo prošili sa nekim dodatnim feature-ima od kojih je vecina proizašla iz vaših prijedloga - hvala :) Novosti u v1.2. su: - Neusuglašenost zahtjeva (http://fiskalizacija.codeplex.com/workitem/645) - Sample projekt - iznosi se množe sa 100 (http://fiskalizacija.codeplex.c...MFCMAPI: October 2012 Release: Build: 15.0.0.1036 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.3: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.3 For detailed release notes check the release notes. TypeScript supportWrite your code in a ...MCEBuddy 2.x: MCEBuddy 2.3.7: Changelog for 2.3.7 (32bit and 64bit) 1. Improved performance of MP4 Fast and M4V Fast Profiles (no deinterlacing, removed --decomb) 2. Improved priority handling 3. Added support for Pausing and Resume conversions 4. Added support for fallback to source directory if network destination directory is unavailable 5. MCEBuddy now installs ShowAnalyzer during installation 6. Added support for long description atom in iTunesFoxyXLS: FoxyXLS Releases: Source code and samplesHTML Renderer: HTML Renderer 1.0.0.0 (3): Major performance improvement (http://theartofdev.wordpress.com/2012/10/25/how-i-optimized-html-renderer-and-fell-in-love-with-vs-profiler/) Minor fixes raised in issue tracker and discussions.Window Manager: Window Manager 1.0: First releaseProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...Launchbar: Launchbar 4.2.2.0: This release is the first step in cleaning up the code and using all the latest features of .NET 4.5 Changes 4.2.2 (2012-11-02) Improved handling of left clicks 4.1.0 (2012-10-17) Removed tray icon Assembly renamed and signed with strong name Note When you upgrade, Launchbar will start with the default settings. You can import your previous settings by following these steps: Run Launchbar and just save the settings without configuring anything Shutdown Launchbar Go to the folder %LOCA...CommonLibrary.NET: CommonLibrary.NET 0.9.8.8: Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.8 - Final ReleaseApplication: FluentScript Version: 0.9.8.8 Build: 0.9.8.8 Changeset: 77368 ( CommonLibrary.NET ) Release date: November 2nd, 2012 Binaries: CommonLibrary.dll Namespace: ComLib.Lang Project site: http://fluentscript.codeplex.com/ Download: http://commonlibrarynet.codeplex.com/releases/view/90426 Source code: http://common...New Projects.NET Data Export Examples: This project is created to export data in C#,VB.NET from database,listview,command to PDF, Word,Excel,RTF,Html,XML,Access,DBF,SQL Script,SYLK,DIF,CSV,Clipboardb9b18a35-a80a-440c-bb8c-195be0225cfa: b9b18a35-a80a-440c-bb8c-195be0225cfaBudget Monkey: Personal Budgeting and Expense Tracking Application - ASP.Net MVC 4 - LINQ - Sql Server ClassLibrary5: ?0?????ORM ??:http://www.cnblogs.com/wushilonng/archive/2011/11/21/2257657.html ??????????????.CodeTextBox: CodeTextBox is a Windows Forms control for colorizing code while you are typing in the text box.Content Management System: web projectCopperfield: Copperfield is an extensibility framework built around contextual awareness. It is intended to be used in combination with one's DI / IoC framework of choice.Cyfuscator: This project show how create your own obfuscator for application .net, as a protection source codeData Browser: The Data Browser is a Windows 8 application that provides a great way to navigate and explore data (ODATA, RDF, ATOM, RDFa) published on the web. DevTask: Dev Task With MVC 4 and EF5DVB Viewer EPG Update Script: DVB Viewer EPG Update ScriptFcompress: Fcompress est un programme de compression simple, rapide et efficace de texte (mots). Programme conçu pour Eurêmaths, groupe Europole.Fdecompress: Fdecompress sert à décomprimer tout mot ou texte comprimer avec Fcompress.Hiren's Boot CD Program Launcher (Unicode support): Hiren's Boot CD Program Launcher (Unicode support)Image Gallery for WPF: A simple image gallery controlIMDb API: C# Class for grabbing data from the IMDb website.License Migration Live@edu Exchange to Office 365 A2: Only a little help to change the licenses after migration from Live@edu to Office 365MvcMSFootballManager: ASP MVC3 self-trainingNage: .NET Agent-based evolution frameworkOE NIK szakirány féléves: Féléves feladat.Office365 Helper: Office365 Helper is a collection of classes and methods to assist in administering and developing solutions for SharePoint online.Powershell Depo: This a collection of Powershell scripts that are collected and modified from anywhere and everywhere. Feel free to download whatever you need.Proejct13251109: sssProject13271109: sdfgdRemotableViewModel: The RemotableViewModel (RVM) library allows sharing of ViewModels accross process boundaries following the Model-View-ViewModel (MVVM) pattern.ScriptEngine: ScriptEngine for C#, JavaScript, VB. The ScriptEngine enables perform script snippets/files. In addition, the scripts can be cached.Shibboleth IdP Loader for ADFS: A PowerShell script to load Shibboleth federation IdPs as ADFS trusted claims providerSparklings: Game in which you change sparklings abilities using spots of light to help them reach the exit.Stala - Auto-update essentials: C# library and examples for event driven auto-updates without predefined graphical components/windows. Works with MSI packages and installer over web/intranet.STeaL : stealed functionarities from STL: STeaL is a .NET class library implemented with C# and enables you to use STL functionarities. especially, various of IList<T> extensions included.TechQueue: A series of Projects and code which are described in the blog http://techqueue.wordpress.comtesttom11082012git03: fsatesttom11082012tfs02: dsToyunda Phone: A simple searchable list of the songs available at the Karaoke rooms in the Epitanime event ran by students at the school named Epita in Paris.WebSearch.Net: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. Win8Controls: This project contains XAML based calendar control for WinRT / Windows Store Style application.WindowsCommonStorage: windows common storage

  Read the article

• Will Dolphin emulator run (smoothly) on this machine?

  - by Mark

  Product Specs: Intel® NM10 Express chipset /w Intel® Atom® D525 (dual-core, 1.8 GHz) I think the most I can put in there for RAM is 4 GB. (They don't make 8 GB SODIMM do they?) The Dolphin site is pretty vague about requirements: Windows XP or higher, or Linux, or MacOSX Intel Fast CPU with SSE2. GPU with Pixel Shader 2.0 or greater. Some integrated graphics chips work but it depends on the model (and only with DirectX 9). I'm trying to make a light-weight quiet little machine for streaming video and playing eumulators, and I'm trying to figure out the minimum requirements I will need to do what I want. I know I'm not supposed to ask for product recommendations here, so if you could just advise the minimum requirements in terms of CPU, graphics card, and RAM, that'd be helpful.

  Read the article

• Star Trek inspired home automation visualisation

  - by Zak McKracken

  I’ve always been a more or less active fan of Star Trek. During the construction phase of my house I started coding a GUI for controlling the house which has an EIB. Just for fun I designed a version inspired by the LCARS design used in Star Trek TNG and showed this to my wife. I showed her several designs before but this was the only one, she really liked. So I decided to go on with this. I started a C# WinForms application. The software runs on a wall mounted Shuttle Barebone-PC. First plan was an industrial panel-pc but the processor was too slow. The now-used Atom is ok. I started with the LCARS-controls found on Codeproject. Since the classic LCARS design divides the screen into two parts this tended to be impracticable, so I used my own design For now the software is able to: Switch lights/wall outlets Show current temperatures for all room controllers Show outside temperature with a 24h trend chart Show the status of the two heat pumps Provide an alarm clock (e.g. for cooking) Play internet radio streams Control absence Mute the door bell Speak status messages via speech synthesis For now, I’m working on an integration of my electric meter. The main heat pump and the electric meter are connected to my LAN. I also tried some speech recognition, but I’ve problems with the microphone. I't’s working when you are right in front of the PC, but not far away, let’s say on the other side of the room. So this is the main view. The table displays raw values which are sent over the EIB – completely useless but looks great For each floor I have a different view. Here you can see the temperatures and check the status of the lights (the buttons are blinking when a light is switched on) This is the view for the heat pump:   Next step would be to integrate a control of my squeezebox server (I use different Squeezeboxes through the house as a multiroom audio solution)

  Read the article

• Upgrade to 12.04 results to empty Dash, no date & time either on the top panel

  - by Nicolas

  I've upgraded from Ubuntu netbook remix something to 12.04 LTS, and I've got two issues. (Got an Asus eeePc 32bits, Intel 945GME x86/MMX/SSE2 and Intel Atom CPU N270 @ 1.6Ghz x2) Nothing in the Dash. Only the "home" tab, other tabs are missing. No search results whatsoever. Missing elements in the system panel, privacy and date & time. No date & time on the right corner either. I've tried to reset unity with the terminal but the process was a whole mess full of errors. It did show date & time in the system panel (not on the top-right corner) while the process was going on in the terminal. But then it was such a mess (no more icons on the right corner amongst other things), and the process wouldn't complete, so I had to reboot the computer and get Unity as before, still no date & time and privacy.

  Read the article

• usb wifi dongle on ubuntu server, cannot install realtek driver RTL 8188cus

  - by Sandro Dzneladze

  I got cheap Ebay wifi dongle from HongKong, Im trying to set it up on my ubuntu server. Occasionally need to move server, so it cannot always be connected to router via lan. Anyhow, usb wifi came with a driver cd. I uploaded files to my home directory and tried to run install script (RTL 8188cus): sudo bash install.sh But I get error: Authentication requested [root] for make driver: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/2.6.38-8-server/build M=/home/minime/RTL 8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.38-8-server' make[1]: *** No rule to make target `8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126'. Stop. make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-server' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg Any ideas what Im doing wrong? There is another driver folder for linux called: RTL 81XX, which doesn't have install.sh at all! I tried to use make command, but I get: make: *** No targets specified and no makefile found. Stop. Any help? this is first time I'm installing driver from source. Im on Ubuntu 11.04 server. lsusb Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1083] (rev c0) sudo lshw description: Desktop Computer product: To Be Filled By O.E.M. (To Be Filled By O.E.M.) vendor: To Be Filled By O.E.M. version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: AD525PV3 vendor: ASRock physical id: 0 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: P1.20 date: 04/01/2011 size: 64KiB capacity: 448KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot *-cpu description: CPU product: Intel(R) Atom(TM) CPU D525 @ 1.80GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz serial: To Be Filled By O.E.M. slot: CPUSocket size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 48KiB capacity: 48KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-bank:1 description: DIMM [empty] product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 *-pci description: Host bridge product: N10 Family DMI Bridge vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: N10 Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:fea78000-fea7bfff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:feb00000-febfffff ioport:80000000(size=2097152) *-network description: Ethernet interface product: Atheros Communications vendor: Atheros Communications physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: c0 serial: XX size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.99 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:febc0000-febfffff ioport:ec00(size=128) *-usb:0 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:d880(size=32) *-usb:1 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:d800(size=32) *-usb:2 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:d480(size=32) *-usb:3 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:d400(size=32) *-usb:4 description: USB Controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fea77c00-fea77fff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-ide description: IDE interface product: N10/ICH7 Family SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff90(size=16) memory:80200000-802003ff *-disk description: ATA Disk product: WDC WD10TPVT-11U vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WXC1A80P0314 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00088c47 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /media/private version: 1.0 serial: 042daf2d-350c-4640-a76a-4554c9d98c59 size: 300GiB capacity: 300GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:03 filesystem=ext4 label=Private lastmountpoint=/media/private modified=2012-04-13 20:01:16 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-13 20:01:16 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 625GiB capacity: 625GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /media/storage capacity: 600GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /media/dropbox capacity: 24GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-volume:2 description: EXT4 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/www version: 1.0 serial: 9b0a27b4-05d8-40d5-bfc7-4aeba198db7b size: 2570MiB capacity: 2570MiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:11 filesystem=ext4 label=www lastmountpoint=/media/www modified=2012-04-15 11:31:12 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-15 11:31:12 state=mounted *-volume:3 description: Linux swap volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 version: 1 serial: 6ed1130e-3aad-4fa6-890b-77e729121e3b size: 4098MiB capacity: 4098MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:400(size=32) *-scsi physical id: 1 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb size: 3864MiB (4051MB) capabilities: partitioned partitioned:dos configuration: signature=000b4c55 *-volume description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 logical name: / version: 1.0 serial: 33926e39-4685-4f63-b83c-f2a67824b69a size: 3862MiB capacity: 3862MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-10-11 14:03:46 filesystem=ext4 lastmountpoint=/ modified=2012-03-19 11:47:29 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro,barrier=1,data=ordered mounted=2012-04-15 11:31:11 state=mounted rfkill list all Doesnt show anything! dmesg | grep -i firmware [ 0.715481] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared

  Read the article

• bad ram or bad motherboard

  - by user39508

  I have a computer which crashes after about 5-45 seconds of operation. It can run memtest86+, and it doesn't display any errors, but it doesn't prevent it from crashing within the time frame listed above. The heat sink appears to be installed correctly, and I don't think it is related to overheating. The motherboard is connected to the ram and a monitor, nothing else is installed. The processor is an atom 330, running memtest86+ 4.0. Any insight into if the ram is bad or if it is the motherboard/psu/cpu? Thanks!

  Read the article

• Seeking solution for printing-reporting .NET

  - by Parhs

  I am developing an application that prints in separate threads in extreme cases about 20-25 pages per minute to various thermal printers. Currently templates for these are XAML xps documents. All printers have graphics drivers that support EMF/GDI printing. So GDI-EMF is done by operating system resulting in slower performance. Sending raw text for printing is another good solution but doesnt work always , because some clients have old chinese thermal printer that nobody support thus impossible to change codepage / emulation. So it doesnt work always. Also most computers running my software are low end ATOM CPU. So I am thinking to return to GDI, EMF printing and have both Text-Only reports and EMF reports. Another reason i want EMF is because here receipts are signed by Electronic Fiscal Memory device.Most of these dont do good job extracting text from XPS as they dont follow the standard but how windows convert GDI to XPS.Even with text-only mode some of them dont support all character encodings and are impossible to send paper cut command after the sign. I know that using a reporting engine would solve rendering problem but I dont want to buy one. All I want is to be able to show tabular data and insert an image and replaced text.I know there is StringTemplate that could do the generation of template but the problem is i should parse somehow the template and render it using GDI commands. Is there any other solution/approach for this ? Or is there anything ready ?

  Read the article

• CodePlex Daily Summary for Sunday, June 09, 2013

  CodePlex Daily Summary for Sunday, June 09, 2013Popular ReleasesZXMAK2: Version 2.7.5.5: - several fixes for joystick scanVG-Ripper & PG-Ripper: PG-Ripper 1.4.13: changes NEW: Added Support for "ImageJumbo.com" links FIXED: Ripping of Threads with multiple pagesCKEditor™ Provider for DotNetNuke®: CKEditor Provider 2.00.05: Whats New Updated to CKEditor 4.1.1 Added Auto Save Function (autosave plugin) {Delay can be defined in the Config - Default is 25} New Setting to set the Default Link Type (Editor Config Tab) Added CodeMirror Plugin Settings to the Editor Config Tab Added WordCount Plugin Settings to the Editor Config Tab Added Maximum Upload File Size Info to the Upload Dialog Added Check for Maximum Upload Size on Quick Upload and File Browser Upload changes File-Browser: Fixed an Issue with S...Property Framework: Property Framework (binaries) Latest: Latest stable 6/8/2013xFunc: xFunc (2.2.0.0): Added: user functions;PHP Vulnerability Hunter: PHP Vulnerability Hunter 1.4.0.20 Alpha: PHP Vulnerability Hunter 1.4.0.20 AlphaXomega Framework: Xomega.Framework 1.4: Adding support for Visual Studio 2012 and .Net framework 4.5. Minor bug fixes and enhancements.sb0t v.5: sb0t 5.14: Stability fix in script engine. Avatar.exists property fixed in scripting. cb0t custom font protocol re-added and updated to support new Ares.ASP.NET MVC Forum: MVCForum v1.3.5: This is a bug release version, with a couple of small usability features and UI changes. All the small amount of bugs reported in v1.3 have been fixed, no upgrade needed just overwrite the files and everything should just work.Json.NET: Json.NET 5.0 Release 6: New feature - Added serialized/deserialized JSON to verbose tracing New feature - Added support for using type name handling with ISerializable content Fix - Fixed not using default serializer settings with primitive values and JToken.ToObject Fix - Fixed error writing BigIntegers with JsonWriter.WriteToken Fix - Fixed serializing and deserializing flag enums with EnumMember attribute Fix - Fixed error deserializing interfaces with a valid type converter Fix - Fixed error deser...Christoc's DotNetNuke Module Development Template: DotNetNuke 7 Project Templates V2.3 for VS2012: V2.3 - Release Date 6/5/2013 Items addressed in this 2.3 release Fixed bad namespace for BusinessController in one of the C# templates. Updated documentation in all templates. Setting up your DotNetNuke Module Development Environment Installing Christoc's DotNetNuke Module Development Templates Customizing the latest DotNetNuke Module Development Project TemplatesPulse: Pulse 0.6.7.0: A number of small bug fixes to stabilize the previous Beta. Sorry about the never ending "New Version" bug!QlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...BlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .Document.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsNew ProjectsAcer 1420p Leaky Handle Fix: Fixes leaking handles on the Acer 1420p laptop given out at PDC09.Akismet Spam Filter for Community Server 2008.5: Akismet Spam Filter for Community Server 2008.5 Atom Timer: Atom Timer is a thread based time that allows schedules to be created using events.BRICK CMS: These Days,I am tired to listen that: .NET is going down and JAVA/Ruby/Python will replace it. yes,they have been growing up while .NET's going down. do or die?DataTestFramework: ???????&ORM??????Date/Time Interval: The Date Time Interval allows for different types of interval to be created. The class will enumerate the defined interval support LINQ statements. More informaDimas.Net: .net infrastructure to create a web/service server from scratch. it includes n-tier , log , policy injection , mapper , MVC best prictice and etc.Gannet: Gannet is an operating system for us (the target developers) to learn about how an Operating System is put together and what components are needed.Image Resize For Android: Android????????????LightBlog: LightBlog?????Node.js，Express??，Mongodb???markdown??????????Memory: Live artistic interaction using KinectNestedHtmlWriter: This is a helper class library for writing simple HTML document, by using statement in C#.Operation Sneak Peek: Windows Phone game that includes stealth+logic gameplay. Player has to look for hidden letters to discover a secret word and use it to defuse a bomb.Orchard DarkStripes Theme: Orchard theme based on Octopress DarkStripesPath copy from context menu: ????????????????????????????Phantomas: mouhouhahahahaSE1: NO SUMMARY ! SiteLinks DNN Module: The SiteLinks DNN module is a module for displaying a list of existing links on your DNN website. This module works in similarly to the DNN "Links" skin object.sql to object maping: SqlString CodeMapTCP/IP Communication Framework: TCP/IP Communication Framework (TCP/IP CF) is a library that wraps the .NET Socket class and defines several classes for developing communication applications..UTorrentClient Api: UTorrentClient Api is an extensible set of classes that use WebUI to manipulate µTorrent remotely.Visual Studio Spell Checker: A Visual Studio editor extension that checks the spelling of comments, strings, and plain text as you type. Supports configuration and various languages.zjsru_xyw: this is a test projectZTrans: ztrans is language for embedded software development???: test?????????: ??????????? ????：VS2012+SQL2012 ????：ASP.NET(.NET 4.0) ????：MVC3+EF5 ????： ?????，??，?? ???????，??，?? ????????，??，?? ????DIV+CSS?? Jquery??1.6.4 ??Ajax??????

  Read the article

• Fresh install of Ubuntu 12.10 won't boot on Asus X101CH Eee PC

  - by Najdmie

  I did a fresh install of Ubuntu 12.10 in my Asus X101CH Eee PC, using a live usb which I made using startup disk creator, replacing Ubuntu 12.04. The installation ran smoothly, but when I boot, it goes to a purple screen for a second, then a lot of text like the following shows up in sequence: Starting crash report submission daemon [OK] Starting CPU interrupts balancing daemon [OK] Stopping save kernel messages [OK] _ And the cursor just keeps blinking for hours. I can't log in. Pressing Alt + F2 did not bring me to console mode. I thought it might be a partition problem so I formatted the whole disk, by creating a new partition table using gparted in Ubuntu 12.04 live USB. I noticed that I can't try Ubuntu using 12.10 live USB either; it just went to a blank screen when I hit the 'try ubuntu' button. But the same problem arose. I even changed the pen drive for the live USB a couple of times. I happened to know that the Intel Atom N2600 Cedar Trail CPU in my computer is not well supported in Linux, I managed to install its drivers in Ubuntu 12.04, although the computer went blank during the installation.

  Read the article

• Suggestions for a SOHO/Home Asterisk system

  - by James

  I would like to buy a small embedded system that runs Linux and Asterisk. I would like two FXS ports ( to plug analogue phones into ) and one FXO port ( to plug in to my real line to allow access to the POTS ). I would like it to have a USB port to hold storage for voicemail. I really want it for home use so I would like it to be under £150 ( say $250 ), given that you can buy ADSL routers for around this much can any of them be made to run Linux and Asterisk? I don't want a PC as the power usage would be too high. I am looking for something like this ASDL router but open and able to run Asterisk or another open PBX. At worst I would like a box which had one FXO and two FXS and just made them completely available over IP to a full Asterisk system on a low power Atom system.

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >