Search Results

Search found 413 results on 17 pages for 'bateman ap'.

Page 13/17 | < Previous Page | 9 10 11 12 13 14 15 16 17  | Next Page >

• SOLVED Install MythTV & 11.10 on Lenovo S12 (Intel atom) with wireless

  - by keepitsimpleengineer

  This is how I installed Ubuntu 11.10 and MythTV client on my Lenovo S12 (Intel Atom) laptop and use it using WiFi (see additional notes at end). I did this because the upgrade from 11.04 bricked the laptop. Note that the partitions on the Lenovo standard disk were already in place for this installation. Also note that my LAN is setup for fixed IP addresses. Downloaded and burned 11.10 x86 Desktop Ubuntu CD Connected the power supply cord, LAN wire and the external DVD USB drive. Ran Windows XP and made sure performance level "Performance" was set and "Wireless" was enabled. Booted S12 from CD Disabled Networking from icon on upper left panel icon Edited Connections… "Wired connection 1" ? Set IP address, accepted default netmask and set gateway. Also set DNS server. Good idea to check "Connection Information" here to verify everything's O.K. Selected Install Ubuntu from the initial "Install" window Verified the three items were checked (required disk space available, plugged into a power source, & connected to the Internet) Selected Download updates while installing and third party software. Hit Continue… At wireless selected don't want to connect…WiFi…now. Continue… At Installation type, selected Something else. Continue… At partition tale, selected the ext4 Linux partition, set the mount point as "/", and marked for formatting. Here I selected the main disk (/sda) for installing the boot manager. Continue… Selected or verified my Time zone. Continue… Selected my keyboard layout. Continue… Filled in the who are you fields. Make sure password is required to sign in is checked. Continue… Chose a picture. Continue… I selected import no accounts. Continue… Wait as the Install creeps along. If your screen goes blank, tap the space bar ? apparently the screen saver/power plan does this. There are several progress bars. The longest was "Installing system", and it was the next to the last one. Installation Complete window appears, Restart Now… Wait as it stops, The screen blanks then the message "…remove…media…close tray…press enter" I just unplugged the USB DVD and hit enter… It was disheartening but the screen turned Ubuntu Purple-beige and nothing happened, so I help down the power key until it shut down, the pressed it again and the Grub Boot screen appeared. Select Ubuntu… 25.The screen went blank with the little flashing underscore cursor on it and the disk light would occasionally flash. I hit the enter key and eventuality Ubuntu started. After a somewhat long time the unity desktop appeared. 11.10, unlike earlier versions, retains the connection information. Check this by checking the network icon on the upper left applet panel. Here the touch-pad·mouse quit working and I had to reboot. It takes and extremely long time to boot, sometimes requiring several power off/ power on (cold boot). You can try to get the default network manager to work, but it might not, it didn't on mine for WiFi. Thanks to: Chris at URL here's what to do… disconnect your wired Internet connection. input your wireless information into network manager open a terminal (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "terminal". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. click to open a terminal, and type in: sudo rmmod acer_wmi && echo "blacklist acer_wmi" >> /etc/modprobe.d/blacklist.conf and hit enter. type in your password as asked. if you have correctly entered your WiFi information and you are near your AP, you should connect immediately if not, see the URL above ? you might need to replace "network manager" with "wicd" ? I did with 11.04. Update the new 11.10, in the upper left panel applet weird·gear icon is menu with a line about updating. It's the new way to invoke Update Manager. Your lenovo S12 (intel atom) should now run the new unity Ubuntu. Point your elbow at the ceiling and pat yourself on the back. Installing Mythbuntu Client 24.1 Open mythbuntu.org/repos (I urge you not to directly use Ubuntu Software Center for this) Install Mythbuntu Repos Save the file (in ~/Downloads, the default) Run the file ? it will update your repositories so that you will get the proper installation sources ? it will start Ubuntu Software Center to do this ? Click Install… You will need your password. Debconf window will open, select by making sure check mark is in the little box "Would you like to activate…". Forward… Which version? At the time of writing the current "Stable" version was 24.1, select 0.24.x… Forward… Read the message, then forward… Delete the downloaded file. Install synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "synaptic". Click on the synaptic icon. Ubuntu Software Center will open and allow you to install synaptic package manager. Open Synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "Synaptic". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. Run synaptic, read the intro, and close the intro window. Type in mythbuntu-control-centre in the Quick filter text box, and then select it "Mark for installation" by clicking on the box next to it's name. Marvel at the additional to be installed items, then select "?Mark"… At the top of the synaptic window click on the "? Apply" button. Marvel at the amount of stuff to be installed, the click on "Apply". When finished, close finished window and synaptic. Open mythbuntu-control-centre (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythbuntu". Might be a good idea to drag and drop the mythbuntu-control-centre icon to the terminal, it's easy to get rid of later. You can now configure and install the frontend. Go down the icon totem on the right side of the window and click as needed… System roles. ? No Backend, Desktop Frontend, and Ubuntu Desktop. Apply… & Apply changes… & Password… MySQL Configuration ? from backend ? Setup General Alt-N(ext) Alt-N(ext) Stetting Access Setup PIN code: ~~~~ Input Security key and click "Test Connection", if ?, then Apply… & Apply… {note: for some inexplicable reason, control centre hung on this, but when I restarted it, it was set properly} Graphics drivers, When I did this, only the Broadcom wireless driver showed up. I closed without doing anything. Services. I enabled SSH & Samba. Apply… & Apply… Repositories. Asked & Answered. MythExport. Pass, I believe it requires backend on the same system. Proprietary Codec Support. Check to enable, Apply… & Apply… System Updates. No action necessary, will be a part of the Ubuntu update mechanism. Themes and Artwork. For themes, I selected Enable/Update all. Apply… & Apply… Infrared & Startup behavior and Plugins. Defer until you know more. Close software centre. Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Incorrect Group Membership. Fix this by clicking "Yes"… Log out/end. Do this by clicking "Yes"… For my Lenovo S12, I had to manually restart Ubuntu - and still with the very long restart…/no start/cold boot/reboot/pressing the shift key required Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Will open with Select country & language. Do so. then get message with "No", hit "Ok" and arrive at the data base Configuration 1/2 screen. You will need your brackend password, from backend ? Setup General Database Configuration 1/2 Password:~? Enter this Hit Alt-n to go to the next page. Select "Use custom id…", then enter a custom ID, I use the machine's name. Hit finish, and MythTV should start up with all default settings. For the lenovo S12, the first thing you want to do is to set Playback profiles to "Normal". From Setup TV Settings Playback Alt-N(ext) Alt-N(ext) Playback Profiles (3/8) : Change Current Video Playback Profile to "Normal". You can fiddle with this setting later. For the lenovo S12, the second thing is to get the sound going. From Setup General Alt-N(ext) Alt-N(ext) Alt-N(ext) Audio System: The top of the screen is a button title "Scan for audio devices", move the highlight there and press the Space bar. Then Tab down to Audio Output Device: and left-right arrow until "ALSA:hw:Card=Intel,DEV=0" is selected. Then Alt-N(ext) until "Finish". Now you should have sound. You should now have MythTV working nicely on the Lenovo S12 Notes about wireless: Running Lenovo S12 on wireless is demanding on both power and WiFi connection. Best results will be obtained when running on power and wired connection. I run my S12 on wireless, actually two serial connections with two access points, something that is not easy to achieve. Here Mythbuntu client-server (in den) <? wireless link 1 <?office LAN? wireless link 2 <? Lenovo S12 Ubuntu 11.10 The office LAN is fixed IP behind an Untangle firewall router. There is another MythTV client on Ubuntu 10.10 computer in the office (which has always worked well). ProblemMythbuntu\Win7 client hangs with frozen frames, short segment of audio repeating. Hardware Rosewill RNX-G300EX IEEE 802.11b/g PCI Wireless Card on client-server 2 Linksys WRT54GL wireless broadband routers on LAN for link1 and link 2 WRT54GL FirmwareDD-WRT v24-sp2(07/22/09) voip set up to act as an access point. Note? many people advised this was an unworkable scheme, and in probably most cases it will be. Solution? Set up DD-WRT with the following Wireless settings… Basic Channel: Different fixed channels at least 4 difference, I use 6 & 11 Basic Sensitivity Range (ACK timing): 50 MAC filter use filter: Enable, Selected Permit only clients listed to access… Requires adding MAC addresses in "Edit MAC Filter List" This causes the 54GL's to ignore any but the listed MAC address, down side, no "guest" capability. Advanced Basic rate: All Advanced CTS Protection Mode: Off Advanced Frame Burst: Enable Advanced Max associate clients: 4 for client link 2, 1 for client-server link 1 Advanced AP isolation: Enable Advanced Preamble: Short Advanced Afterburner: On Advanced Wireless GUI access: Off Advanced WMM support: Off Other settings: default for supplied firmware. Why I suspect this worked? The 54GL Access Points's with the firmware's setting are set to handle a multiple client, wide area situation. With these mods I reconfigured them for a small area, few client situation, disabling Advanced WMM probably the most important. In addition, the client mythtv when used all other users of its access point are turned off except for a Skype phone. Also, the client-server is set up to allow other connections though it's LAN connection, and these are used to connect the TV and disc players, not used when client is being used.

  Read the article

• Extremely strange iTunesConnect error--Missing Screenshot??

  - by Steve

  So I finally got through the mess of preparing my app binary to support the iPad, making it a univeral app, and then I got this strange error "Missing Screenshot". And due to the fact that I hadn't uploaded my iPad screenshots to the original binary (I forgot) that error made sense. So I went into the original iPhone app, added my iPad screenshots, and hoped that somehow it would just work, but it didn't. So then, I rejected the binary, and made sure the iPad screenshots were where they needed to be, re-uploaded a new binary, and it still says MISSING SCREENSHOT. I emailed apple, and they characteristically won't get back to me till probably sometime next week, so I am hoping that someone here can shed some on this error for me! What can I do to get that error to go away, so I can get my ap reviewed and updated? Thank you very much!

  Read the article

• Creating a CD-burning feature for a music player based on Java

  - by jjanggoo

  Hi, I'm trying to create a CD-burning feature for a Java-based music player for my school project. Since I'm new to real-life programming (I've only learned to write codes on AP Computer Science A level), I don't know how I can apply the concepts I learned from APCS A to this task. A friend of mine who is studying computer science at graduate school told me to "look up the cd player control functions and add methods in those classes to read in data that you want to write to the CD, write it to a buffer, write everything in the buffer to the CD itself, clear the buffer and then write a new chunk of data into the buffer," but I can't quite grasp what this means, and tt's really hard to contact her right now because she's busy working on her dissertation. Can someone from this forum please guide me through & explain the general concepts? Thank you!

  Read the article

• Parsing SGF files in C#

  - by mafutrct

  The text-based Smart Game Format has become the sole file format for exchanging Go game records by now. I stared with disbelieve that there are almost no parsers available. Google yielded a few results in antique Java and Python, but no modern implementations. I am curious if I have to write my own parser. Do you know of a modern implementation in C# or Java? In case there really are no parsers available, how should I implement one? Are there general guidelines or tools (in a C# environment) I should know of? This is an example file: (;GM[1]FF[4]CA[UTF-8]AP[CGoban:3]ST[2] RU[Japanese]SZ[19]KM[6.50] PW[White]PB[Black] ;B[pd] ;W[dc] ;B[dq] ;W[pp] ;B[ce] (;W[ed] ;B[ci] ;W[kc]) (;W[do] ;B[dl] ;W[gp] ;B[eo] ;W[en] ;B[fo]))

  Read the article

• Comma or semicolon-delimited AutoComplete TextBox

  - by Ecyrb

  I would like to have a TextBox that supports AutoComplete and lets users type multiple words separated by a comma or semicolon, offering suggestions for each word. I have a standard TextBox with textBox.AutoCompleteCustomSource.AddRange(new[] { "apple", "banana", "carrot" }); textBox.AutoCompleteMode = AutoCompleteMode.SuggestAppend; textBox.AutoCompleteSource = AutoCompleteSource.CustomSource; Unfortunately it will only suggest for the first word. Anything typed after that and it stops suggesting. I want to be able to perform the following scenario: Type "ap" Have it suggest "apple" Press the comma Have it fill in "apple," with the cursor after the comma Type "ba" Have it suggest "banana" Press the comma Have it append "banana," resulting in "apple,banana," I've tried Googling for a solution, but haven't had much luck. This seems to be a popular feature for web apps, but apparently not for winforms. Any suggestions?

  Read the article

• Ad-Hoc mode and Cell (how does it work)?

  - by Ori Cohen

  hello, I am setting up a wireless Ad-Hoc network manually in linux using iwconfig and ifconfig. I have gotten everything working, and I think I understand it all except access point. The part that confused me is this: If I have essid='some_id', channel=11, Mode=Ad-Hoc and appropriate routing/ip on both laptops, why do I need to make sure the Cell is the same? I was under the impression that Ad-Hoc worked independently of the access point. I can easily get around this, I just use iwconfig wlan0 ap 00:00:00:00:00:01 Why is this necessary? I've been unable to find a good tutorial on this. If anyone can clear this up I'd appreciate it. Thanks

  Read the article

• How can I further optimize this color difference function?

  - by aLfa

  I have made this function to calculate color differences in the CIE Lab colorspace, but it lacks speed. Since I'm not a Java expert, I wonder if any Java guru around has some tips that can improve the speed here. The code is based on the matlab function mentioned in the comment block. /** * Compute the CIEDE2000 color-difference between the sample color with * CIELab coordinates 'sample' and a standard color with CIELab coordinates * 'std' * * Based on the article: * "The CIEDE2000 Color-Difference Formula: Implementation Notes, * Supplementary Test Data, and Mathematical Observations,", G. Sharma, * W. Wu, E. N. Dalal, submitted to Color Research and Application, * January 2004. * available at http://www.ece.rochester.edu/~gsharma/ciede2000/ */ public static double deltaE2000(double[] lab1, double[] lab2) { double L1 = lab1[0]; double a1 = lab1[1]; double b1 = lab1[2]; double L2 = lab2[0]; double a2 = lab2[1]; double b2 = lab2[2]; // Cab = sqrt(a^2 + b^2) double Cab1 = Math.sqrt(a1 * a1 + b1 * b1); double Cab2 = Math.sqrt(a2 * a2 + b2 * b2); // CabAvg = (Cab1 + Cab2) / 2 double CabAvg = (Cab1 + Cab2) / 2; // G = 1 + (1 - sqrt((CabAvg^7) / (CabAvg^7 + 25^7))) / 2 double CabAvg7 = Math.pow(CabAvg, 7); double G = 1 + (1 - Math.sqrt(CabAvg7 / (CabAvg7 + 6103515625.0))) / 2; // ap = G * a double ap1 = G * a1; double ap2 = G * a2; // Cp = sqrt(ap^2 + b^2) double Cp1 = Math.sqrt(ap1 * ap1 + b1 * b1); double Cp2 = Math.sqrt(ap2 * ap2 + b2 * b2); // CpProd = (Cp1 * Cp2) double CpProd = Cp1 * Cp2; // hp1 = atan2(b1, ap1) double hp1 = Math.atan2(b1, ap1); // ensure hue is between 0 and 2pi if (hp1 < 0) { // hp1 = hp1 + 2pi hp1 += 6.283185307179586476925286766559; } // hp2 = atan2(b2, ap2) double hp2 = Math.atan2(b2, ap2); // ensure hue is between 0 and 2pi if (hp2 < 0) { // hp2 = hp2 + 2pi hp2 += 6.283185307179586476925286766559; } // dL = L2 - L1 double dL = L2 - L1; // dC = Cp2 - Cp1 double dC = Cp2 - Cp1; // computation of hue difference double dhp = 0.0; // set hue difference to zero if the product of chromas is zero if (CpProd != 0) { // dhp = hp2 - hp1 dhp = hp2 - hp1; if (dhp > Math.PI) { // dhp = dhp - 2pi dhp -= 6.283185307179586476925286766559; } else if (dhp < -Math.PI) { // dhp = dhp + 2pi dhp += 6.283185307179586476925286766559; } } // dH = 2 * sqrt(CpProd) * sin(dhp / 2) double dH = 2 * Math.sqrt(CpProd) * Math.sin(dhp / 2); // weighting functions // Lp = (L1 + L2) / 2 - 50 double Lp = (L1 + L2) / 2 - 50; // Cp = (Cp1 + Cp2) / 2 double Cp = (Cp1 + Cp2) / 2; // average hue computation // hp = (hp1 + hp2) / 2 double hp = (hp1 + hp2) / 2; // identify positions for which abs hue diff exceeds 180 degrees if (Math.abs(hp1 - hp2) > Math.PI) { // hp = hp - pi hp -= Math.PI; } // ensure hue is between 0 and 2pi if (hp < 0) { // hp = hp + 2pi hp += 6.283185307179586476925286766559; } // LpSqr = Lp^2 double LpSqr = Lp * Lp; // Sl = 1 + 0.015 * LpSqr / sqrt(20 + LpSqr) double Sl = 1 + 0.015 * LpSqr / Math.sqrt(20 + LpSqr); // Sc = 1 + 0.045 * Cp double Sc = 1 + 0.045 * Cp; // T = 1 - 0.17 * cos(hp - pi / 6) + // + 0.24 * cos(2 * hp) + // + 0.32 * cos(3 * hp + pi / 30) - // - 0.20 * cos(4 * hp - 63 * pi / 180) double hphp = hp + hp; double T = 1 - 0.17 * Math.cos(hp - 0.52359877559829887307710723054658) + 0.24 * Math.cos(hphp) + 0.32 * Math.cos(hphp + hp + 0.10471975511965977461542144610932) - 0.20 * Math.cos(hphp + hphp - 1.0995574287564276334619251841478); // Sh = 1 + 0.015 * Cp * T double Sh = 1 + 0.015 * Cp * T; // deltaThetaRad = (pi / 3) * e^-(36 / (5 * pi) * hp - 11)^2 double powerBase = hp - 4.799655442984406; double deltaThetaRad = 1.0471975511965977461542144610932 * Math.exp(-5.25249016001879 * powerBase * powerBase); // Rc = 2 * sqrt((Cp^7) / (Cp^7 + 25^7)) double Cp7 = Math.pow(Cp, 7); double Rc = 2 * Math.sqrt(Cp7 / (Cp7 + 6103515625.0)); // RT = -sin(delthetarad) * Rc double RT = -Math.sin(deltaThetaRad) * Rc; // de00 = sqrt((dL / Sl)^2 + (dC / Sc)^2 + (dH / Sh)^2 + RT * (dC / Sc) * (dH / Sh)) double dLSl = dL / Sl; double dCSc = dC / Sc; double dHSh = dH / Sh; return Math.sqrt(dLSl * dLSl + dCSc * dCSc + dHSh * dHSh + RT * dCSc * dHSh); }

  Read the article

• C error expected specifier-qualifier-list before ‘time_t’

  - by ambika

  I got the error from error.c:31: /usr/include/ap/mas.h:254: error: expected specifier-qualifier-list before ‘time_t’ make: *** [error.o] Error 1 Feedback We at least need to see line 31 of error.c and line 254 of mas.h, with preferably a few lines of context around each. This error may have nothing to do with how time_t is being declared. – John Bode Then I check in error.c (line no 31) -- #include "mas.h" then I check line no 254 in mas.h. in mas.h #include <sys/types.h> typedef struct _x{ time_t time; }x; Can anybody suggest where I am going wrong?

  Read the article

• Vim: Replacing a line with another one yanked before

  - by duddle

  At least once per day i have the following situation: A: This line should also replace line X ... X: This is line should be replaced I believe that I don't perform that task efficiently. What I do: Go to line A: AG Yank line A: yy Go to line X: XG Paste line A: P Move to old line: j Delete old line: dd This has the additional disadvantage that line X is now in the default register, which is annoying if I find another line that should be replaced with A. Yanking to and pasting from an additional register ("ayy, "aP) makes this simple task even less efficient. My Questions: Did I miss a built-in Vim command to replace a line yanked before? If not, how can I bind my own command that leaves (or restores) the yanked line in the default register?

  Read the article

• Separating merged array of arithmetic and geometric series

  - by user1814037

  My friend asked me an interseting question. Given an array of positive integers in increasing order. Seperate them in two series, an arithmetic sequence and geometric sequence. The given array is such that a solution do exist. The union of numbers of the two sequence must be the given array. Both series can have common elements i.e. series need not to be disjoint. The ratio of the geometric series can be fractional. Example: Given series : 2,4,6,8,10,12,25 AP: 2,4,6,8,10,12 GP: 4,10,25 I tried taking few examples but could not reach a general way. Even tried some graph implementation by introducing edges if they follow a particular sequence but could not reach solution.

  Read the article

• Word Wrap in Vim (preserving indentation)

  - by sixtyfootersdude

  I was just looking at this post which describes how to wrap entire words in vim. The accepted solution was this: :set formatoptions=l :set lbr Which takes this text (tabs are shown as \t): *Inside of window *Outside of window |---------------------------------------| |\t\tthis is a like of text that will wr|ap here |\t\tcan you see the wrap | | | |---------------------------------------| This accomplishes a behavior like this (tabs are shown as \t): *Inside of window *Outside of window |---------------------------------------| |\t\tthis is a like of text that will | |wrap here | |\t\tcan you see the wrap | | | |---------------------------------------| I would however like to redefine this function. I would like the wrapped line to have the same number of tabs in front of it that the line above has plus one. Ie: *Inside of window *Outside of window |---------------------------------------| |\t\tthis is a like of text that will | |\t\t\twrap here | |\t\tcan you see the wrap | | | |---------------------------------------| Any ideas?

  Read the article

• Running an intern program

  - by dotneteer

  This year I am running an unpaid internship program for high school students. I work for a small company. We have ideas for a few side projects but never have time to do them. So we experiment by making them intern projects. In return, we give these interns guidance to learn, personal attentions, and opportunities with real-world projects. A few years ago, I blogged about the idea of teaching kids to write application with no more than 6 hours of training. This time, I was able to reduce the instruction time to 4 hours and immediately put them into real work projects. When they encounter problems, I combine directions, pointer to various materials on w3school, Udacity, Codecademy and UTube, as well as encouraging them to  search for solutions with search engines. Now entering the third week, I am more than encouraged and feeling accomplished. Our the most senior intern, Christopher Chen, is a recent high school graduate and is heading to UC Berkeley to study computer science after the summer. He previously only had one year of Java experience through the AP computer science course but had no web development experience. Only 12 days into his internship, he has already gain advanced css skills with deeper understanding than more than half of the “senior” developers that I have ever worked with. I put him on a project to migrate an existing website to the Orchard content management system (CMS) with which I am new as well. We were able to teach each other and quickly gain advanced Orchard skills such as creating custom theme and modules. I felt very much a relationship similar to the those between professors and graduate students. On the other hand, I quite expect that I will lose him the next summer to companies like Google, Facebook or Microsoft. As a side note, Christopher and I will do a two part Orchard presentations together at the next SoCal code camp at UC San Diego July 27-28. The first part, “creating an Orchard website on Azure in 60 minutes”, is an introductory lecture and we will discuss how to create a website using Orchard without writing code. The 2nd part, “customizing Orchard websites without limit”, is an advanced lecture and we will discuss custom theme and module development with WebMatrix and Visual Studio.

  Read the article

• Silverlight Cream for December 29, 2010 -- #1018

  - by Dave Campbell

  In this Issue: Arik Poznanski, Derik Whittaker(-2-), Alex Knight, Maurice de Beijer, Jesse Liberty, Jason Ginchereau, Jeff Blankenburg, Mike Snow, and Peter Kuhn. Above the Fold: Silverlight: "Silverlight: Reading from a File Contained in your XAP" Mike Snow WP7: "A ReorderListBox for Windows Phone 7" Jason Ginchereau Expression Blend: "PathListBox: making rockin' animations" Alex Knight From SilverlightCream.com: Order in Chaos: Dependency Property Value Resolution Arik Poznanski sent me the link to his blog with this Dependency property value resolution post which demonstrates in successive detail xaml for each of the scenarios. Closing the Virtual Keyboard (SIP) and forcing binding in WP7 Derik Whittaker has a couple new posts up... this first is about how to close the SIP and forcing binding in a WP7 app... if you've run many WP7 apps I'm sure you understand the issue. Help my Slider control does not work inside a Grid in WP7 In Derik Whittaker's next post he details a problem he had with a Slider in a Grid that went AWOL... and how he resolved it.. also is asking why the solution works. PathListBox: making rockin' animations Holy Crap ... Alex Knight has his second PathListBox tutorial up and just stop reading and go check it out... dang! ... I'll still be here when you come back! Windows Phone 7, Animations and Data Binding Maurice de Beijer details an interesting problem he ran into where his databinding was hampering a page animation, what the root problem was and how he resolved it.. good information. Windows Phone From Scratch – Navigation Jesse Liberty has the next episode in the Windows Phone from Scratch series up and is talking about Navigation... he demos an ap with 3 pages and simple navigation this time. A ReorderListBox for Windows Phone 7 Found in Jeff Blankenburg's number 11, this post by Jason Ginchereau is a description of a Drag/Drop reodering ListBox drop-in for WP7 ... very cool, and source is on the post. What I Learned In WP7 – #Issue 11 Jeff Blankenburg's number 11 is a couple links itself... one to Jeff Wilcox for Silverlight UnitTest Framework, and one to Jason Ginchereau for Listbox Drag/Drop reordering... going to have to look that one up. Silverlight: Reading from a File Contained in your XAP Mike Snow's latest is on how to load up an extraneous file into your xap for loading at run-time and how to get that to actually work. XNA: Sophisticated primitives Peter Kuhn has a post up on using the XNA PrimitiveBatch class... he had trouble with it at first, and explains how to use it. XNA you say? ... think WP7. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• WebCenter Customer Spotlight: College of American Pathologists

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution Summary College of American Pathologists Goes Live with OracleWebCenter - Imaging, AP Invoice Automation, and EBS Managed Attachment with Support for Imaging ContentThe College of American Pathologists (CAP), the leading organization of board-certified pathologists serving more then 18,000 physician members, 7,000 laboratories are accredited by the CAP, and approximately 22,000 laboratories are enrolled in the College’s proficiency testing programs. The business objective was to content-enable their Oracle E-Business Suite (EBS) enterprise application by combining the best of Imaging and Manage Attachment functionality providing a unique opportunity for the business to have unprecedented access to both structure and unstructured content from within their enterprise application. The solution improves customer services turnaround time, provides better compliance and improves maintenance and management of the technology infrastructure. Company OverviewThe College of American Pathologists (CAP), celebrating 50 years as the gold standard in laboratory accreditation, is a medical society serving more than 17,000 physician members and the global laboratory community. It is the world’s largest association composed exclusively of board certified pathologists and is the worldwide leader in laboratory quality assurance. The College advocates accountable, high-quality, and cost-effective patient care. The more than 17,000 pathologist members of the College of American Pathologists represent board-certified pathologists and pathologists in training worldwide. More than 7,000 laboratories are accredited by the CAP, and approximately 23,000 laboratories are enrolled in the College’s proficiency testing programs.  Business ChallengesThe CAP business objective was to content-enable their Oracle E-Business Suite (EBS) enterprise application by combining the best of Imaging and Manage Attachment functionality providing a unique opportunity for the business to have unprecedented access to both structure and unstructured content from within their enterprise application.  Bring more flexibility to systems and programs in order to adapt quickly Get a 360 degree view of the customer Reduce cost of running the business Solution DeployedWith the help of Oracle Consulting, the customer implemented Oracle WebCenter Content as the centralized E-Business Suite Document Repository.  The solution enables to capture, present and manage all unstructured content (PDFs,word processing documents, scanned images, etc.) related to Oracle E-Business Suite transactions and exposing the related content using the familiar EBS User Interface. Business ResultsThe CAP achieved following benefits from the implemented solution: Managed Attachment Solution Align with strategic Oracle Fusion Middleware platform Integrate with the CAP existing data capture capabilities Single user interface provided by the Managed Attachment solution for all content Better compliance and improved collaboration  Account Payables Invoice Processing Imaging Solution Automated invoice management eliminating dependency on paper materials and improving compliance, collaboration and accuracy A single repository to house and secure scanned invoices and all supplemental documents Greater management visibility of invoice entry process Additional Information CAP OpenWorld Presentation Oracle WebCenter Content Oracle Webcenter Capture Oracle WebCenter Imaging Oracle  Consulting

  Read the article

• Thank you Geeks With Blogs for letting me join your community!

  - by GreeNTUG

  First, a link to the blog I can no longer edit because Office Live blew away my digital identity and so I can no longer log into it (the source of a loooong blog about protecting your digital identity sometime when I have more time and after it has played out to the end) http://greentug.spaces.live.com/ The following are the communities I participate in: Green & Sustainability.  I run a virtual user group on Green and Sustainability as it relates to developers and software architects.  It was located at greentug.groups.live.com, and we will need to find a new digital location for it, because I am locked out of that site as well. BizSpark Tampa Bay:  I run a BizSpark group for Microsoft technologists (meetup.com, search for BizSpark Tampa Bay) and speak at Code Camps about "No Better Time to Start Your Own Tech Business".  The meetup group facilitates a balanced presentation that is respectful to anyone wanting to start their own business, whether part-time or full-time, whether micro (just you), sustainable (grow to 2-25-ish, self-funded), high growth (get venture capital or other funding, grow it, sell it within 5 years, do it again), or hybrid (the new model going forward).  It is an "action" group, with assignments and homework if you want to get the most out of it.   At the end of a year you will either have your business on the path to where you want it to be, or you will know the steps you need to do to get it there. Women in Technology Have been participating in the Women in Technology community since 2008, my main interests in this area are mentoring women in the workplace to have them believe they can become geeks and double their income, and to mentor them with respect to starting and running their own business. Access 2010/SharePoint 2010.  This is a game-changer with respect to the Access community (the ap both devs and IT Pros love to hate, the other a-word that's not a fruit).  I conducted Lunch n Learns and Brunch n Learns around this topic before the Office 2010/SharePoint 2010 launch, and spoke on the topic at SharePoint Saturday Tampa in Nov 2009. Interested in learning more about: Using Silverlight HD Streaming out in the non-technical world (horses and equestrian sport).  Migrating to Access Web Services and VB .Net from VBA (see the Access 2010/SharePoint 2010 interest above) Windows Phone 7!  Exciting opportunities both for Green and Sustainability and for my "day job" of Environmental, Health & Safety (EHS). My day job is Environmental, Health & Safetey (EHS) consulting and software solutions, where that interfaces with the developer world is with respect to opportunities around Green and Sustainability, The SmartGrid and Juval Lowy's EnergyNet, both of which will require a lot of technology and software to make them work, The new Microsoft Partner competency for "Digital Home", and The Y2K kind of deadline around how managing chemicals in ERP systems is changing because of Global Harmonization, which hits the EU with a hard deadline on 11/30/10 (yes, this year), and hits the USA about 15 months later. Hope you enjoy my contributions to the digital geek community, and feel free to email me, [email protected] (the email leftover after my digital identity was blown away), and [email protected] (this one could go away at some future point) Best, Kathy Malone

  Read the article

• Ubuntu Server and setting up two nic cards

  - by kmalik

  I have ubuntu server on a computer with a wireless and hardwired nic card. The wireless needs to get the internet and pass it to the ubuntu server as well as pass it along to the hardwired nic card to more computers. I am having issues getting the basic set up as I believe the route table is grabbing from the wrong nic card. The router is 192.168.1.0 and the server is set to 192.168.1.11 on the wireless card through DHCP ETH0 (wired nic card) is set up to be 10.10.10.0 and the server is 10.10.10.1) I am not a linux or networking guru but basically I am trying to have internet come from a guest network 192.168.1.0 i believe to give internet to the ubuntu server then the ubuntu server will also A) have the wired nic serve DHCP addresses to other computers via a switch or router (that acts as a switch) via 10.10.10.0 addresses. And I would love if it also passed along internet capabilities as well if possible. Bu really at this point my hope is to at least get the internet working on the server and the DHCP to pass correctly. At the moment the specific issue I am having is getting ubuntu server to connect to the internet and have both nic cards up and running correctly. Any help would be appreciated! The route table is as follows: Destination Gateway GM Flags Metric Iface 0.0.0.0 10.10.10.1 0.0.0.0 UG 100 eth0 10.10.10.0 0.0.0.0 255.255.255.0 U 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 eth0 1992.168.1.0 0.0.0.0 255.255.255.255.0 U 0 eth1 My interfaces is set up as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.1 netmask 255.255.255.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.1 domain-name-servers 192.168.1.0 auto eth1 iface eth1 inet dhcp netmask 255.255.255.0 gateway 192.168.1.0 wpa-driver wext wpa-ssid "ssid_name" wpa-ap-scan 1 wpa-proto wpa wpa-pairwise ccmp wpa-group ccmp wpa-key-mgmt wpa-psk wpa-psk "HASH" My DHCPD.conf (as there is a domain name server on here is as follows): ddns-update-style none default-lease-time 600 max-lease-time 7200 authoritative option domain-name "Kamron's Network" option subnet-mask 255.255.255.0 option broadcast-address 10.10.10.255 option routers 192.168.1.0 option domain-name-server 192.168.1.0 98.223.128.213 ooption subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.99 } log-facility local7

  Read the article

• Phone number in meta description bad or good for local rankings NAP

  - by bybe

  Once again I'm at it with increasing people's local rankings and I've learnt so much about local rankings in the past 2 weeks it feels like my brain is gonna pop anyway, question is fairly simple for someone who engages in local rankings and I appreciate the question may be a little guess work but isn't SEO mostly guessing anyway? From what I've read and learned that Google works of a system called nap for local rankings (With many other factors but this question is purely based on NAP). For people who care about local rankings NAP stands for Name of Business / Address of Business / Phone Number for Business. Now what what I've read you don't need the whole NAP to be on one website, a P or just a N can help towards your local rankings. It's believed that NAP rewards more than just P and N for example but knowing Google they might have a diversity checker which is my concern what your get to in a moment. Now of course sites weight differently where your business is posted, it's certainly going to be more credible if your NAP details are on your national phone book than say a blog site, so taking in this consideration too. Pure Guess (Not apart of the question but none the less makes a good read on my belief). Now my guess work would make me believe that the formula would look something like (N)+(A)+(P)x(T) So (N)name would be 1 or 0 to indicate present or not So (A)dress would be 1 or 0 to indicate present or not So (P)hone would be 1 or 0 to indicate present or not So (T)rust would be 1-100 to indicate level of trust So a phone number appearing on youtube might look something like 0+0+1x95= 95 and a NAP appearing on your national phone book might look something like 1+1+1x100= 300 Please note that I'm not saying this is the sole factor and I'm sure its way more complex that this with things like other factors on the page, off the page (Reviews, Links, Clicks) and so on but its still a contributor). The Question My question is fairly simple and I'd imagine hard to impossible to have an actual definite answer to this but maybe someone has seen official wording else where on this, is it bad to include address or phone number in the Meta Description? The reason I ask is that one of my competitors has these elements in the meta descriptions and their local rankings are absolutely superb, the problem I have with this is scrap bot sites like 'Similar Too' 'Seo Rankings' and 1,000's of the other scrap box networks that scrap site and then make urls with your site information are mostly limited to your meta description what this means that your phone number, address and sometimes even your company name if the domain is exact will appear as AP, and even NAP on thousands of websites. So, is it a bad strategy to include phone number and address in meta description, everything I read into would suggest its good of course with the downside of maybe lowering quality of description for click thoughts but top rankings would increase this 10 folds anyhow..

  Read the article

• Should EICAR be updated to test the revision of Antivirus system?

  - by makerofthings7

  I'm posting this here since programmers write viruses, and AV software. They also have the best knowledge of heuristics and how AV systems work (cloaking etc). The EICAR test file was used to functionally test an antivirus system. As it stands today almost every AV system will flag EICAR as being a "test" virus. For more information on this historic test virus please click here. Currently the EICAR test file is only good for testing the presence of an AV solution, but it doesn't check for engine file or DAT file up-to-dateness. In other words, why do a functional test of a system that could have definition files that are more than 10 years old. With the increase of zero day threats it doesn't make much sense to functionally test your system using EICAR. That being said, I think EICAR needs to be updated/modified to be effective test that works in conjunction with an AV management solution. This question is about real world testing, without using live viruses... which is the intent of the original EICAR. That being said I'm proposing a new EICAR file format with the appendage of an XML blob that will conditionally cause the Antivirus engine to respond. X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-EXTENDED-ANTIVIRUS-TEST-FILE!$H+H* <?xml version="1.0"?> <engine-valid-from>2010-1-1Z</engine-valid-from> <signature-valid-from>2010-1-1Z</signature-valid-from> <authkey>MyTestKeyHere</authkey> In this sample, the antivirus engine would only alert on the EICAR file if both the signature or engine file is equal to or newer than the valid-from date. Also there is a passcode that will protect the usage of EICAR to the system administrator. If you have a backgound in "Test Driven Design" TDD for software you may get that all I'm doing is applying the principals of TDD to my infrastructure. Based on your experience and contacts how can I make this idea happen?

  Read the article

• Building a Solaris 11 repository without network connection

  - by user12611852

  Solaris 11 has been released and is a fantastic new iteration of Oracle's rock solid, enterprise operating system.  One of the great new features is the repository based Image Packaging system.  IPS not only introduces new cloud based package installation services, it is also integrated with our zones, boot environment and ZFS file systems to provide a safe, easy and fast way to perform system updates. My customers typically don't have network access and, in fact, can't connect to any network until they have "Authority to connect."  It's useful, however, to build up a Solaris 11 system with additional software using the new Image Packaging System and locally stored repository. The Solaris 11 documentation describes how to create a locally stored repository with full explanations of what the commands do. I'm simply providing the quick and dirty steps.  The easiest way is to download the ISO image, burn to a DVD and insert into your DVD drive.  Then as root: pkg set-publisher -G '*' -g file:///cdrom/sol11repo_full/repo solaris Now you can to install software using the GUI package manager or the pkg commands.  If you would like something more permanent (or don't have a DVD drive), however, it takes a little more work. After installing Solaris 11, download (on another system perhaps) the two files that make up the Solaris 11 repository from our download site Sneaker-net the files to your Solaris 11 system Unzip and cat the two files together to create one large ISO image. The file is about 6.9 GB in size zfs create rpool/export/repoSolaris11 zfs set atime=off rpool/export/repoSolaris11 zfs set compression=on rpool/export/repoSolaris11 (save some space) lofiadm -a sol-11-1111-repo-full.iso /dev/lofi/1 mount -F hsfs /dev/lofi/1 /mnt You could stop here and set the publisher to point to the /mnt/repo location, however, this mount will not be persistent across reboots. Copy the repository from the mounted ISO image to a permanent, on disk location. rsync -aP /mnt/repo /export/repoSolaris11 pkgrepo -s /export/repoSolaris11 refresh pkg set-publisher -G '*' -g /export/repoSolaris11/repo solaris You now have a locally installed repository for adding additional software packages for Solaris 11.  The documentation also takes you through publishing your repository on the network so that others can access it.

  Read the article

• wlan0 (WPA2) doesn't work when configured manually

  - by 71GA

  I have been trying to reconfigure my eth0 and wlan0 interfaces by editing /etc/network/interfaces file as folows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.11 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 dns-nameservers 193.2.1.66 auto wlan0 iface wlan0 inet static address 192.168.1.10 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 dns-nameservers 193.2.1.66 wpa-driver wext wpa-ssid lausi wpa-ap-scan 2 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk 8952a447c860d13847ba1cabd15314ba9caf2fb207f19598f90c43fcd43c0d97 But my wireless doesnt work when i use command /etc/init.d/networking restart and when i do this i get an error: * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... RTNETLINK answers: File exists Failed to bring up eth0. ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument RTNETLINK answers: File exists Failed to bring up wlan0. Although it clearly states that my eth0 interface couldn't be brought to life it is working! But i cant say this for the wlan0 interface which doesn't even work if i unplug internet cable and again use command /etc/init.d/networking restart. This seems weird to me... When i use ìfconfig -a command i get an output which confirms that wlan0 isnt working and eth0 is. ziga@ziga-cq56:/etc/network$ ifconfig -a eth0 Link encap:Ethernet HWaddr 60:eb:69:6f:5f:69 inet addr:192.168.1.11 Bcast:192.168.1.13 Mask:255.255.255.0 inet6 addr: fe80::62eb:69ff:fe6f:5f69/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6764 errors:0 dropped:0 overruns:0 frame:0 TX packets:6641 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5932190 (5.9 MB) TX bytes:1331846 (1.3 MB) Interrupt:42 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1759 errors:0 dropped:0 overruns:0 frame:0 TX packets:1759 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:107772 (107.7 KB) TX bytes:107772 (107.7 KB) wlan0 Link encap:Ethernet HWaddr 70:f3:95:e7:57:cc inet addr:192.168.1.10 Bcast:192.168.1.12 Mask:255.255.255.0 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) How can i make my wlan0 interface work? It had been working previously with network manager and wicd...

  Read the article

• nokia cell phone not accepting IP from dnsmasq dhcp server

  - by samix

  Hello, I having problem connecting a NOkia cell phone to my home wifi network. The wifi network is provided by a wireless card in a machine running Debian Testing and 2.6.26-2-686 kernel. The cars is D-Link DWL-G520 working in ap mode and has WPA encryption enabled. The wireless network is provided by hostapd using madwifi driver. Windows and Mac machines work properly with this wifi network. When I try to get the Nokia phone to connect to the wifi network, I get these lines in my dnsmasq log (to see lines without wrapping, here is the pastebin link for convenience - http://pastebin.com/m466c8fd2): Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 IEEE 802.11: disassociated Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 IEEE 802.11: associated Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 RADIUS: starting accounting session 4AE664FA-00000036 Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 WPA: pairwise key handshake completed (WPA) Oct 27 13:25:21 red hostapd: ath0: STA 11:22:33:44:55:66 WPA: group key handshake completed (WPA) Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 Available DHCP range: 192.168.5.150 -- 192.168.5.199 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 DHCPDISCOVER(ath0) 0.0.0.0 11:22:33:44:55:66 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 DHCPOFFER(ath0) 192.168.5.21 11:22:33:44:55:66 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 requested options: 12:hostname, 6:dns-server, 15:domain-name, Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 requested options: 1:netmask, 3:router, 28:broadcast, 120:sip-server Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 tags: known, ath0 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 next server: 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 1 option: 53:message-type 02 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 54:server-identifier 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 51:lease-time 00:00:46:50 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 58:T1 00:00:23:28 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 59:T2 00:00:3d:86 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 1:netmask 255.255.255.0 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 28:broadcast 192.168.5.255 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 3:router 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 4 option: 6:dns-server 192.168.5.1 Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 8 option: 15:domain-name home.pvt Oct 27 13:25:21 red dnsmasq-dhcp[11451]: 3875439214 sent size: 3 option: 12:hostname NokiaCellPhone Anybody know the problem might be? If I switch off dnsmasq dhcp queries logging, i.e. if I decrease the verbosity of the log, all I see are two lines of DHCPDISCOVER(ath0) and DHCPOFFER(ath0) repeatedly in the log with no acceptance by the cell phone. It appears as though the phone is not accepting the dhcp offer. However, if I give the phone a static IP address in its configuration, it works properly on the wifi network. So it appears as though the problem is dhcp related. Hints? Suggestions? Installed stuff: $ dpkg -l dnsmasq hostap* | grep ^i ii dnsmasq 2.50-1 A small caching DNS proxy and DHCP/TFTP server ii dnsmasq-base 2.50-1 A small caching DNS proxy and DHCP/TFTP server ii hostapd 1:0.6.9-3 user space IEEE 802.11 AP and IEEE 802.1X/WPA/ Thanks. PS: Here is the DHCP tcp dump for more information (with mac addresses changed): $ sudo dhcpdump -i ath0 -h ^11:22:33:44:55:66 TIME: 2009-10-30 12:15:32.916 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 0 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:32.918 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 0 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:32.918 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 0 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:34.922 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 2 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:34.922 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 2 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:34.923 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 2 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:38.919 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 6 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:38.920 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 6 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:38.921 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: c3f93d53 SECS: 6 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:46.944 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: ccafe769 SECS: 14 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:46.944 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: ccafe769 SECS: 14 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 0.0.0.0 SIADDR: 0.0.0.0 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 1 (DHCPDISCOVER) OPTION: 50 ( 4) Request IP address 0.0.0.0 OPTION: 61 ( 7) Client-identifier 01:11:22:33:44:55:66 OPTION: 55 ( 7) Parameter Request List 12 (Host name) 6 (DNS server) 15 (Domainname) 1 (Subnet mask) 3 (Routers) 28 (Broadcast address) 120 (SIP Servers DHCP Option) OPTION: 57 ( 2) Maximum DHCP message size 576 TIME: 2009-10-30 12:15:46.945 IP: 192.168.5.1 (a:bb:cc:dd:ee:ff) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 2 (BOOTPREPLY) HTYPE: 1 (Ethernet) HLEN: 6 HOPS: 0 XID: ccafe769 SECS: 14 FLAGS: 7f80 CIADDR: 0.0.0.0 YIADDR: 192.168.5.21 SIADDR: 192.168.5.1 GIADDR: 0.0.0.0 CHADDR: 11:22:33:44:55:66:00:00:00:00:00:00:00:00:00:00 SNAME: . FNAME: . OPTION: 53 ( 1) DHCP message type 2 (DHCPOFFER) OPTION: 54 ( 4) Server identifier 192.168.5.1 OPTION: 51 ( 4) IP address leasetime 18000 (5h) OPTION: 58 ( 4) T1 9000 (2h30m) OPTION: 59 ( 4) T2 15750 (4h22m30s) OPTION: 1 ( 4) Subnet mask 255.255.255.0 OPTION: 28 ( 4) Broadcast address 192.168.5.255 OPTION: 3 ( 4) Routers 192.168.5.1 OPTION: 6 ( 4) DNS server 192.168.5.1 OPTION: 15 ( 8) Domainname home.pvt OPTION: 12 ( 3) Host name Nokia_E63 TIME: 2009-10-30 12:15:48.952 IP: 0.0.0.0 (1:22:33:44:55:66) 255.255.255.255 (ff:ff:ff:ff:ff:ff) OP: 1 (BOOTPREQUEST) HTYPE: 1 (Ethernet) HLEN: 6 ... and so on ...

  Read the article

• Intel Wireless 4965AGN not achieving N throughput when connected to an Airport Express N network

  - by BenA

  I have an Intel Wireless WiFi Link 4965AGN adaptor in my laptop (HP Pavillion dv2000 series) which is connecting to a 5Ghz-only 802.11n network provided by an Apple Airport Express. The network is using WPA2 encryption. My desktop is also connected the Airport, via a Linksys WUSB600N USB adaptor. Both are running with the latest drivers, and the Airport is running the latest firmware. The Airport is also configured to use wide channels. The problem I have is that I never get throughput above 4MB/s when transferring files between the two machines. Even a pessimistic calculation shows a 270Mbps network as being capable of transfer rates at well above 10MB/s. I'm pretty sure I've isolated the issue to being the Intel adaptor, as wiring the desktop to the AP, and using the Linksys adaptor on the laptop immediately yielded speeds limited by the 100MB/s ethernet connection. I know that 802.11n is still a draft standard, and so mixing kit from different manufacturers can easily lead to poor results, but I was just wondering if anybody else out there has had success with this Intel adaptor on an N network? Or even better, connecting it to an Airport Express? Can anybody give me any advice on how to troubleshoot this issue? I should also mention that the Airport Express doesn't allow you to manually specify channels when running in N mode, and that I've been able to rule out interference from other Wireless LANs by scanning. There aren't any other 5GHz networks in my area. All ideas welcome! Update: A while later, I've just updated to the most recent drivers for both the Intel chip in the laptop, and the USB adaptor. Unfortunately this hasn't improved things :(. If anybody has any advice it would be be gratefully received.

  Read the article

• OpenVPN Bridge LAN-to-LAN Configuration?

  - by Shad Reese

  I'm trying to configure an OpenVPN bridge LAN-to-LAN setup. Currently, I have the OpenVPN bridge Server/Client setup up running. On the server-side my br-lan interface has tap0, eth0, and wlan0 in the bridge group. On the client-side the br-lan interface has eth0 and wlan0 in the bridge group, the client tap0 is outside of the br-lan group. Currently the two bridge groups are connected via the wlanO interfaces (server-side is the Access Point - AP and the client-side is the wireless client). My goal is to connect the two bridge groups with a wireless VPN pipe. My network configuration: Server: br-lan: 10.4.96.50 Client: br-lan: 10.4.96.75 tap0: 10.4.96.100 <---- issued by the VPN server. Unfortunately, I'm stuck with using a bridge instead of a routed OpenVPN setup. My question is how (if possible) do I add the client tap0 interface to the client bridge group, as to ensure all traffic between the server/client bridge groups is using the VPN pipe? SERVER CONFIG FILE. config openvpn sample_server # Set to 1 to enable this instance: option enable 1 option port 1194 option proto udp option dev tap0 option key /etc/easy-rsa/keys/server.key option dh /etc/easy-rsa/keys/dh1024.pem option ifconfig_pool_persist /tmp/ipp.txt option server_bridge "10.4.96.50 255.255.255.0 10.4.96.100 10.4.96.200" list push "redirect-gateway local def1" list push "dhcp-option DNS 10.4.96.14" option duplicate_cn 1 option comp_lzo 1 option max_clients 100 option log /tmp/openvpn.log option verb 3 CLIENT CONFIG FILE: config 'openvpn' 'sample_client' option 'enable' '1' option 'client' '1' option 'dev' 'tap' option 'proto' 'udp' list 'remote' '10.4.96.50 1194' option 'status' /tmp/openvpn-status.log option 'log' /tmp/openvpn.log option 'ca' '/etc/easy-rsa/keys/ca.crt' option 'cert' '/etc/easy-rsa/keys/client.crt' option 'key' '/etc/easy-rsa/keys/client.key' option 'comp_lzo' '1' option 'verb' '5' Thanks in advance,

  Read the article

• How can I close a port that appears to be orphaned by Xvfb?

  - by Jim Fiorato

  I'm running Xvfb on a FC8 Amazon EC2 image. On occasion Xvfb will crash (unable at the moment to find out the reason for the crash), and after crashing the TCP port will appear to be orphaned. I'm unable to get a PID to kill any process that may be using it. I'm starting Xvfb with: Xvfb :7 -screen 0 1024x768x24 & Examples of what I'm working with are below, the Xvfb port is (was) 6007: # netstat -ap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:ssh *:* LISTEN 1894/sshd tcp 0 0 *:6007 *:* LISTEN - tcp 0 352 ip-10-84-69-165.ec2.int:ssh c-71-194-253-238.hsd1:51689 ESTABLISHED 2981/0 udp 0 0 *:bootpc *:* 1817/dhclient udp 0 0 *:bootpc *:* 1463/dhclient Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ] DGRAM 871 668/udevd @/org/kernel/udev/udevd unix 2 [ ACC ] STREAM LISTENING 5385 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 6 [ ] DGRAM 5353 1867/rsyslogd /dev/log unix 2 [ ] DGRAM 11861 2981/0 unix 2 [ ] DGRAM 5461 1974/crond unix 2 [ ] DGRAM 5451 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5438 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5437 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5396 1880/dbus-daemon unix 3 [ ] STREAM CONNECTED 5395 1880/dbus-daemon unix 2 [ ] DGRAM 5361 1871/rklogd # lsof -i COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME dhclient 1463 root 3u IPv4 4704 UDP *:bootpc dhclient 1817 root 4u IPv4 5173 UDP *:bootpc sshd 1894 root 3u IPv4 5414 TCP *:ssh (LISTEN) sshd 2981 root 3u IPv4 11825 TCP ip-10-84-69-165.ec2.internal:ssh->c-71-194-253-238.hsd1.il.comcast.net:51689 (ESTABLISHED) Attempting to force the port closed with iptables doesn't seem to work either. iptables -A INPUT -p tcp --dport 6007 -j DROP I'm at a loss as to how to reclaim/free the port. From what I can tell, this port will remain in this state until the EC2 instance is shut down. So, how can I close this port so I can restart Xvfb?

  Read the article

• Error while detecting start profile for instance with ID _u

  - by Techboy

  I am upgrading a SAP Java instance and am getting the error shown in the log below. There are not backup profile files in the profiles directory. The string _u does not exist in the default, start or instance profile for instance SCS01. Please can you suggest what the issue might be? Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initializexAbstractPhaseType.javax758x [Thread[main,5,main]]: Phase PREPARE/INIT/DETERMINE_PROFILES has been started. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initializexAbstractPhaseType.javax759x [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypeDetermineProfiles. Mar 13, 2010 12:09:01 PM [Info]: ...ap.sdt.j2ee.phases.PhaseTypeDetermineProfiles.checkVariablesxPhaseTypeDetermineProfiles.javax284x [Thread[main,5,main]]: All 4 required variables exist in variable handler. Mar 13, 2010 12:09:01 PM [Info]: ....j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariablexAbstractInfoController.javax302x [Thread[main,5,main]]: Parameter /J2EE/StandardSystem/DefaultProfilePath has been detected. Parameter value is \server1\SAPMNT\PI7\SYS\profile\DEFAULT.PFL. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.j2ee.tools.sysinfo.ProfileDetector.detectInstancexProfileDetector.javax340x [Thread[main,5,main]]: Instance SCS01 with profile \server1\SAPMNT\PI7\SYS\profile\PI7_SCS01_server1, start profile \server1\SAPMNT\PI7\SYS\profile\START_SCS01_server1, and host server1 has been detected. Mar 13, 2010 12:09:01 PM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecutexAbstractPhaseType.javax862x [Thread[main,5,main]]: Exception has occurred during the execution of the phase. Mar 13, 2010 12:09:01 PM [Error]: com.sap.sdt.j2ee.tools.sysinfo.ProfileDetector.detectInstancexProfileDetector.javax297x [Thread[main,5,main]]: Error while detecting start profile for instance with ID _u. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanupxAbstractPhaseType.javax905x [Thread[main,5,main]]: Phase PREPARE/INIT/DETERMINE_PROFILES has been completed. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanupxAbstractPhaseType.javax906x [Thread[main,5,main]]: Start time: 2010/03/13 12:09:01. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanupxAbstractPhaseType.javax908x [Thread[main,5,main]]: End time: 2010/03/13 12:09:01. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanupxAbstractPhaseType.javax909x [Thread[main,5,main]]: Duration: 0:00:00.078. Mar 13, 2010 12:09:01 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanupxAbstractPhaseType.javax910x [Thread[main,5,main]]: Phase status is error.

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17  | Next Page >