Search Results

Search found 1134 results on 46 pages for 'blender 2 67'.

Page 13/46 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Continuous outbound connection from QNAP NAS

  - by user192702

  I notice on my firewall that my QNAP NAS is continuously sending UDP sessions out to the Internet. Every second I have 5 - 7 connections out to addresses like the following: 2013-11-10 23:17:54 Deny 192.168.60.5 93.215.212.162 6881/udp 6881 6881 2013-11-10 23:18:05 Deny 192.168.60.5 87.76.0.83 29872/udp 6881 29872 2013-11-10 23:18:05 Deny 192.168.60.5 5.164.188.224 6881/udp 6881 6881 2013-11-10 23:18:05 Deny 192.168.60.5 80.61.45.206 6881/udp 6881 6881 2013-11-10 23:18:34 Deny 192.168.60.5 37.117.204.129 6881/udp 6881 6881 2013-11-10 23:18:34 Deny 192.168.60.5 71.67.101.30 51413/udp 6881 51413 2013-11-10 23:18:34 Deny 192.168.60.5 89.28.92.191 8621/udp 6881 8621 2013-11-10 23:18:34 Deny 192.168.60.5 94.244.157.85 28221/udp 6881 28221 2013-11-10 23:18:34 Deny 192.168.60.5 213.241.61.240 9089/udp 6881 9089 2013-11-10 23:18:45 Deny 192.168.60.5 88.163.28.100 52721/udp 6881 52721 2013-11-10 23:18:45 Deny 192.168.60.5 37.55.190.20 10027/udp 6881 10027 2013-11-10 23:18:45 Deny 192.168.60.5 62.72.188.146 14306/udp 6881 14306 2013-11-10 23:19:14 Deny 192.168.60.5 85.53.244.205 51413/udp 6881 51413 2013-11-10 23:19:14 Deny 192.168.60.5 67.163.18.215 52130/udp 6881 52130 2013-11-10 23:19:14 Deny 192.168.60.5 86.172.105.140 9089/udp 6881 9089 2013-11-10 23:19:14 Deny 192.168.60.5 99.28.56.121 52383/udp 6881 52383 2013-11-10 23:19:14 Deny 192.168.60.5 109.60.184.249 46217/udp 6881 46217 2013-11-10 23:19:25 Deny 192.168.60.5 121.107.144.174 21135/udp 6881 21135 2013-11-10 23:19:25 Deny 192.168.60.5 84.39.116.180 48446/udp 6881 48446 2013-11-10 23:19:25 Deny 192.168.60.5 183.238.254.62 openvpn/udp 6881 1194 ......... This is frightening as it seems like it's been hacked to send information out. Has anyone observed this behaviour from their QNAP NAS?

  Read the article

• Linux DHCPD Mac-Address based Groups

  - by GruffTech

  Our Current DHCPD.conf looks like the following. subnet 10.0.32.0 netmask 255.255.255.0 { range 10.0.32.100 10.0.32.254; option subnet-mask 255.255.255.0; option broadcast-address 10.0.32.255; option domain-name-servers 208.67.222.222,208.67.220.220; option routers 10.0.32.5; host Dev-ABaird-W { hardware ethernet 00:1D:09:3E:49:13; fixed-address 10.0.32.94; } ... more static hosts .... } About as basic as it gets. The old router is 10.0.32.1, our company wanted to implement a squid proxy to better monitor web traffic while at work, and if necessary block large time-wasters, IE Facebook.com. However, we've quickly realized that this change has played a mean prank on our Polycom SIP Phones. Occasionally our phones will not ring, the end recipient hears ringing (this is artificially created by our PBX) however the handset never rings. The ONLY thing that has changed in our network is the option routers line. So, Since all Polycom MAC addresses begin with 00:04:F2 would it be possible in DHCP to say any 00:04:F2:::* MAC addresses get option routers 10.0.32.1, and anything else must talk with our Gateway?

  Read the article

• ipmi - can't ping or remotely connect

  - by Fidel

  I've tried configuring the IPMI controller to accept remote connections, but I can't even ping it. Here is it status: #/usr/local/bin/ipmitool lan print 2 Set in Progress : Set Complete Auth Type Support : NONE PASSWORD Auth Type Enable : Callback : : User : NONE PASSWORD : Operator : PASSWORD : Admin : PASSWORD : OEM : IP Address Source : Static Address IP Address : 192.168.1.112 Subnet Mask : 255.255.255.0 MAC Address : 00:a0:a5:67:45:25 IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Enabled Gratituous ARP Intrvl : 8.0 seconds Default Gateway IP : 192.168.1.1 Default Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3 Cipher Suite Priv Max : uaaaXXXXXXXXXXX : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM # /usr/local/bin/ipmitool user list 2 ID Name Enabled Callin Link Auth IPMI Msg Channel Priv Limit 1 true false true true USER 2 admin true false true true ADMINISTRATOR # /usr/local/bin/ipmitool channel getaccess 2 2 Maximum User IDs : 5 Enabled User IDs : 2 User ID : 2 User Name : admin Fixed Name : No Access Available : callback Link Authentication : enabled IPMI Messaging : enabled Privilege Level : ADMINISTRATOR # /usr/local/bin/ipmitool channel info 2 Channel 0x2 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : multi-session Active Session Count : 0 Protocol Vendor ID : 7154 Volatile(active) Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available Non-Volatile Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available # /usr/local/bin/ipmitool chassis status System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : unknown Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false # arp Address HWtype HWaddress Flags Mask Iface 192.168.1.112 ether 00:A0:A5:67:45:25 C bond0 # /usr/local/bin/ipmitool -I lan -H 192.168.1.112 -U admin -P admin chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status In summary. It exists on the ARP list so arp's are being broadcast. I can't ping it and can't connect to it. Can anyone spot any glaring mistakes in the configuration? Many thanks, Fidel

  Read the article

• What is the ip range of EC2

  - by Nicolas Kassis

  I'd like to setup a rule to block ssh request from EC2 since I've been seeing a large amount of ssh based attack from there and was wondering if anyone knew what their IP ranges are. EDIT: Thank you for the answer, I went ahead and implemented the iptables rules as follow. I ignore all traffic for the moment. Logging it just to see if the rules are working and for stats on how much crap EC2 is sending out ;) #EC2 Blacklist $IPTBLS -A INPUT -s 67.202.0.0/18 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 67.202.0.0/18 -j DROP $IPTBLS -A INPUT -s 72.44.32.0/19 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 72.44.32.0/19 -j DROP $IPTBLS -A INPUT -s 75.101.128.0/17 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 75.101.128.0/17 -j DROP $IPTBLS -A INPUT -s 174.129.0.0/16 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 174.129.0.0/16 -j DROP $IPTBLS -A INPUT -s 204.236.192.0/18 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 204.236.192.0/18 -j DROP $IPTBLS -A INPUT -s 204.236.224.0/19 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 204.236.224.0/19 -j DROP $IPTBLS -A INPUT -s 79.125.0.0/17 -j LOG --log-prefix "<firewall> EC2 traffic " $IPTBLS -A INPUT -s 79.125.0.0/17 -j DROP

  Read the article

• Once VPN connection is done, how do I proceed reaching the other side address space?

  - by sports

  I'm using Windows Azure and I created a VPN Site To Site, configured like this: My virtual network: My address space: 10.2.0.0/16 (65531) Subnet1: 10.2.1.0/24 (251) Subnet2: 10.2.2.0/24 (251) Gateway: 10.2.3.0/29 (3) My public gateway IP: 137.135.x.z (I wont show x and z for security reasons) This public gateway uses, as you can see, 5 IPs on subnet1 and 5 IPs on subnet2, and 5 IPs on the gateway "Their" virtual network (in azure this would be a "Local network") Their address space: 172.60.100.67/32, 172.60.100.68/32, 172.60.100.69/32 Their device public IP: x.x.x.x (ommited for security reasons) Notice their address space are 3 IPs So: the VPN is "in green" (in Azure is showing up green, literally, like these two are connected) and now my question is: How do I proceed to reach their address space? I've tried creating a virtual machine (Windows Server 2008, but it could be an Ubuntu) on "my" virtual network and it is automatically "placed" on subnet1 or subnet2. So it gets the IP 10.2.1.0 (valid example), I can't choose to place the virtual machine in the gateway address space. How do I "reach" any of the IPs 172.60.100.67, 172.60.100.68, 172.60.100.69 ? In other words: How can I telnet any of these IPs? or ping? or see them in my network? Please provide me answers for Windows Server 2008 or for an Ubuntu. I'm open to create any virtual machine.

  Read the article

• Where do these mysterious DNS lookups come from and why are they slow?

  - by Hongli

  I have recently obtained a new dedicated server which I'm now setting up. It's running on 64-bit Debian 6.0. I have cloned a fairly large git repository (177 MB including working files) onto this server. Switching to a different branch is very very slow. On my laptop it takes 1-2 seconds, on this server it can take half a minute. After some investigation it turns out to be some kind of DNS timeout. Here's an exhibit from strace -s 128 git checkout release: stat("/etc/resolv.conf", {st_mode=S_IFREG|0644, st_size=132, ...}) = 0 socket(PF_INET, SOCK_DGRAM|SOCK_NONBLOCK, IPPROTO_IP) = 5 connect(5, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr("213.133.99.99")}, 16) = 0 poll([{fd=5, events=POLLOUT}], 1, 0) = 1 ([{fd=5, revents=POLLOUT}]) sendto(5, "\235\333\1\0\0\1\0\0\0\0\0\0\35Debian-60-squeeze-64-minimal\n\17happyponies\3com\0\0\1\0\1", 67, MSG_NOSIGNAL, NULL, 0) = 67 poll([{fd=5, events=POLLIN}], 1, 5000) = 0 (Timeout) This snippet repeats several times per 'git checkout' call. My server's hostname was originally Debian-60-squeeze-64-minimal. I had changed it to shell.happyponies.com by running hostname shell.happyponies.com, editing /etc/hostname and rebooting the server. I don't understand the DNS protocol, but it looks like Git is trying to lookup the IP for Debian-60-squeeze-64-minimal as well as for happyponies.com. Why does Debian-60-squeeze-64-minimal come back even though I've already changed the host name? Why does Git perform DNS lookups at all? Why are these lookups so slow? I've already verified that all DNS servers in /etc/resolv.conf are up and responding slowly, yet Git's own lookups time out. Changing the host name back to Debian-60-squeeze-64-minimal seems to fix the slowness. Basically I just want to fix whatever DNS issues my server has because I'm sure they will cause more problems that just slowing down git checkout. But I'm not sure sure what the problem exactly is and what these symptoms mean.

  Read the article

• xen + debian network after upgrade squeeze to wheeze

  - by rush

  I've got a Debian + Xen server. After a system upgrade to the stable version the network doesn't come up after boot. Every time after reboot I need to bring it up manually. The network configuration was not changed during upgrade. Here is /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 11.22.33.44 netmask 255.255.255.0 gateway 11.22.33.1 nameserver 8.8.8.8 After boot ip r shows no route and eth0 has no ip address. Manually ip and route setup goes fine and network starts working. Messages from dmesg about network I've found (looks like nothing interesting) [ 3.894401] ACPI: Fan [FAN3] (off) [ 3.894444] ACPI: Fan [FAN4] (off) [ 4.178348] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c9 [ 4.178351] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.178392] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 4.178413] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 4.178432] xen: registering gsi 16 triggering 0 polarity 1 -- [ 4.223667] ata5: DUMMY [ 4.223668] ata6: DUMMY [ 4.289153] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c8 [ 4.289155] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 4.289245] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 4.506908] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 4.542920] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) -- [ 10.362999] EXT4-fs (dm-23): mounted filesystem with ordered data mode. Opts: (null) [ 10.419103] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 10.988255] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.175533] Event-channel device installed. [ 13.287555] XENBUS: Unable to read cpu state -- [ 13.288670] XENBUS: Unable to read cpu state [ 13.965939] Bridge firewalling registered [ 14.134048] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.283862] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 14.284543] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.800627] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 17.801377] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 18.307278] device peth0 entered promiscuous mode [ 24.538899] eth1: no IPv6 routers present [ 28.570902] peth0: no IPv6 routers present I've upgraded two servers and I've such behaviour on two of them. How to fix this and get network starts automatically on boot?

  Read the article

• Plesk Uninstall Memory issue

  - by user115079

  I am trying to uninstall plesk from my VPS by running following command: yum remove sw-* psa-* plesk-* when i run this command i get following error: Running rpm_check_debug Running Transaction Test memory alloc (4 bytes) returned NULL. First time when i run above command, this mem alloc (4 bytes) was very big number like (67864987). then i googled it, got some clear/ulimit commands. executed them. rebooted my system. stopped all process and executed this command again. but still getting 4 byte issue. dont know how to get rid of it. I also tried ulimit after reboot but no success and Yes. No swap attached. these are stats of my system [root@vps ~]# free -m total used free shared buffers cached Mem: 384 67 316 0 0 0 -/+ buffers/cache: 67 316 Swap: 0 0 0 top - 21:01:07 up 3:12, 1 user, load average: 0.24, 0.08, 0.03 Tasks: 31 total, 2 running, 29 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 393216k total, 69832k used, 323384k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached is there any other alternative to achieve my goal to uninstall plesk? thanks.

  Read the article

• Am I obliged to use ipv6 tunnel services if I want to be able to use it?

  - by Zagorax

  I was looking for configuring Slackware to use ipv6 but all instruction I found speak about using an ipv6 tunnel that encapsulate ipv6 request into ipv4 packet and send them to an external router that extracts ipv6 request and sends a reply (or, at least, this is what I understood). Is that necessary? Isn't there a way to configure a pure ipv6 system? If yes, could you please point me to a guide that clearly explain how to enable ipv6 without this trick? I would like to configure my Slackware desktop at first, and then do the same with my Centos server. EDIT: maybe I gave you too few information. Sorry. I'll write some more information thanks to the posted guide. ~$ test -f /proc/net/if_inet6 && echo "Running kernel is IPv6 ready" Running kernel is IPv6 ready So, it seems ipv6 is enabled in my kernel. Some other output from ifconfig, route and /etc/resolv.conf content (with opendns): ~$ /sbin/ifconfig wlan0 | grep inet6 inet6 addr: fe80::21f:3bff:fe60:cc5b/64 Scope:Link ~$ /sbin/route -A inet6 | grep wlan0 fe80::/64 :: U 256 0 0 wlan0 ff00::/8 :: U 256 0 0 wlan0 ~$ cat /etc/resolv.conf inet6 nameserver 2620:0:ccc::2 nameserver 208.67.222.222 nameserver 208.67.220.220 But still, with ping6 I can only ping localhost (::1). Everything else is unreachable. Normal ping works fine. That is why I was asking if I am obliged to use a tunnel.

  Read the article

• Some websites hosted on my server cant be reached from some places.

  - by valter

  Hello. I have a bloblem that is causing me headaches to solve. I have a webserver at 100tb.com, running CentOS. I also have these nameservers setted up: 67.213.220.170 ns1.maisturismo.net 67.213.220.171 ns2.maisturismo.net My domain is at Godaddy. I added two Host Summary pointig to the nameserver ips... NS1 to the first IP, and NS2 to the second... Than I changed the nameservers of maisturismo.net to ns1.maisturismo.net and ns2.maisturismo.net http://img20.imageshack.us/i/dnswm.jpg/ Bellow the image showing my dns records to maisturismo.net http://img137.imageshack.us/i/nameservers.jpg/ Its strange... Everythink looks fine, but the webiste is not reachable from [zend2.com][1] proxy, and from some other places, like a friend's house, that dont use the same web provider that I use. I have another nameserver setted up on my server, that have the same problem, All websites that use it cant be reached from zend2.com and from my friends house, except a ".com.br"(Brazillian Domain). Do you have same idea about, what is causing this? I really cant imagine what is the problem... Thanks. [1]: http:// zend2.com

  Read the article

• Iptables state tracking

  - by complexgeek

  Hi there. I've just taken over administration of a fairly complex firewall ruleset for a firewall box running Fedora Core 12, and there's one thing about it that is puzzling me. When I run nmap on the gateway from outside the network, I see all the expected services, but also sunrpc on port 111. The INPUT chain has DEFAULT DROP set, and there is no rule allowing port 111. As best I can tell (watching the packet counters before/during/after the scan) it's being allowed by the rule: "-m state --state RELATED,ESTABLISHED -j ACCEPT" but I don't understand why a brand new TCP connection would be considered RELATED or ESTABLISHED. Any suggestions would be greatly appreciated. EDIT: Conntrack modules: nf_conntrack_netlink 14925 0 nfnetlink 3479 1 nf_conntrack_netlink nf_conntrack_irc 5206 1 nf_nat_irc nf_conntrack_proto_udplite 3138 0 nf_conntrack_h323 62110 1 nf_nat_h323 nf_conntrack_proto_dccp 6878 0 nf_conntrack_sip 16921 1 nf_nat_sip nf_conntrack_proto_sctp 11131 0 nf_conntrack_pptp 10673 1 nf_nat_pptp nf_conntrack_sane 5458 0 nf_conntrack_proto_gre 6574 1 nf_conntrack_pptp nf_conntrack_amanda 2796 1 nf_nat_amanda nf_conntrack_ftp 11741 1 nf_nat_ftp nf_conntrack_tftp 4665 1 nf_nat_tftp nf_conntrack_netbios_ns 1534 0 nf_conntrack_ipv6 18504 2 ipv6 279399 40 ip6t_REJECT,nf_conntrack_ipv6 INPUT chain on the filter table: -A INPUT -s 192.168.200.10/32 -p tcp -m tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -s 127.0.0.0/8 -i lo -j ACCEPT -A INPUT -p udp -m udp --sport 67:68 --dport 67:68 -j ACCEPT -A INPUT -d 192.168.200.5/32 -i eth0 -j ACCEPT -A INPUT -d 192.168.1.2/32 -i eth0 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --dports 22,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --sports 22,25,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --sport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m multiport --sports 53,123 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -i eth0 -m state --state NEW -j ACCEPT -A INPUT -d {public_ip}/32 -m state --state NEW -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT eth0 is connected to the internal network, eth3 is connected to an ADSL modem in bridge mode, ppp0 is the WAN connection tunneled over eth3.

  Read the article

• hall.dll errors

  - by Robert Elliott

  I am getting frequent BSoDs, mostly with hall.dll errors. I have Dell Inspiron laptop running Windows 7 SP1. The following file, werfault, is shown below. Can anyone help me work out what is wrong? Version=1 EventType=BlueScreen EventTime=129987824768810026 ReportType=4 Consent=1 ReportIdentifier=1c3e1c58-3b30-11e2-9074-002219f61870 IntegratorReportIdentifier=113012-32557-01 Response.type=4 DynamicSig[1].Name=OS Version DynamicSig[1].Value=6.1.7601.2.1.0.768.3 DynamicSig[2].Name=Locale ID DynamicSig[2].Value=2057 UI[2]=C:\Windows\system32\wer.dll UI[3]=Windows has recovered from an unexpected shutdown UI[4]=Windows can check online for a solution to the problem. UI[5]=&Check for solution UI[6]=&Check later UI[7]=Cancel UI[8]=Windows has recovered from an unexpected shutdown UI[9]=A problem caused Windows to stop working correctly. Windows will notify you if a solution is available. UI[10]=Close Sec[0].Key=BCCode Sec[0].Value=a Sec[1].Key=BCP1 Sec[1].Value=0000000000000000 Sec[2].Key=BCP2 Sec[2].Value=0000000000000002 Sec[3].Key=BCP3 Sec[3].Value=0000000000000000 Sec[4].Key=BCP4 Sec[4].Value=FFFFF80002C0E477 Sec[5].Key=OS Version Sec[5].Value=6_1_7601 Sec[6].Key=Service Pack Sec[6].Value=1_0 Sec[7].Key=Product Sec[7].Value=768_1 File[0].CabName=113012-32557-01.dmp File[0].Path=113012-32557-01.dmp File[0].Flags=589826 File[0].Type=2 File[0].Original.Path=C:\Windows\Minidump\113012-32557-01.dmp File[1].CabName=sysdata.xml File[1].Path=WER-75941-0.sysdata.xml File[1].Flags=589826 File[1].Type=5 File[1].Original.Path=C:\Users\Robert\AppData\Local\Temp\WER-75941-0.sysdata.xml File[2].CabName=Report.cab File[2].Path=Report.cab File[2].Flags=196608 File[2].Type=7 File[2].Original.Path=Report.cab FriendlyEventName=Shut down unexpectedly ConsentKey=BlueScreen AppName=Windows AppPath=C:\Windows\System32\WerFault.exe *********From the minidump file**** RAX = fffff88002f22150 RBX = fffffa80074141f0 RCX = 000000000000000a RDX = 0000000000000000 RSI = fffffa8007278180 RDI = 0000000000000001 R9 = 0000000000000000 R10 = fffff80002c0e477 R11 = 0000000000000000 R12 = fffffa800523e7a0 R13 = 0000000000001000 R14 = 0000000000000028 R15 = fffffa80074141f0 RBP = fffff88002f22210 RIP = fffff80002cd3fc0 RSP = fffff88002f22048 SS = 0000 GS = 002b FS = 0053 ES = 002b DS = 002b CS = 0010 Flags = 00200286 fffff800`02e99ac0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e99ad0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e99ae0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e99af0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e99b00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e99b10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e99b20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e99b30 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 ................ fffff800`02e99b40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e99b50 00 00 00 00 00 00 00 00 00 00 00 00 ............ fffff800`02e81928 00 00 00 00 .... fffff800`02e81924 00 00 00 00 .... fffff800`02e0a880 37 36 30 31 2E 31 37 39 34 34 2E 61 6D 64 36 34 7601.17944.amd64 fffff800`02e0a890 66 72 65 2E 77 69 6E 37 73 70 31 5F 67 64 72 2E fre.win7sp1_gdr. fffff800`02e0a8a0 31 32 30 38 33 30 2D 30 33 33 33 00 00 00 00 00 120830-0333..... fffff800`02e0a8b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a8c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a8d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a8e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a8f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a900 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a910 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a920 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a930 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a940 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a950 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ fffff800`02e0a960 35 36 65 38 62 61 31 33 2D 37 30 32 39 2D 34 37 56e8ba13-7029-47 fffff800`02e0a970 32 38 2D 61 35 30 36 2D 32 64 64 62 34 61 30 63 28-a506-2ddb4a0c fffff800`02c0e000 C5 0F 85 79 02 00 00 8B 9C 24 90 00 00 00 E9 A5 ...y.....$...... fffff800`02c0e010 00 00 00 44 2B C3 45 33 C9 E8 5E 14 00 00 49 3B ...D+.E3..^...I; fffff800`02c0e020 C5 74 2B 44 8B 8C 24 90 00 00 00 48 8B C8 41 8D .t+D..$....H..A. fffff800`02c0e030 51 FF 41 3B D5 76 0D 44 8B C2 49 83 E8 01 48 8B Q.A;.v.D..I...H. fffff800`02c0e040 49 08 75 F6 48 89 79 08 41 03 D9 48 8B F8 3B DD I.u.H.y.A..H..;. fffff800`02c0e050 75 08 48 8B C7 E9 26 02 00 00 48 8B 96 98 00 00 u.H...&...H..... fffff800`02c0e060 00 48 8D 84 24 90 00 00 00 44 8B C5 48 89 44 24 .H..$....D..H.D$ fffff800`02c0e070 28 44 2B C3 45 33 C9 48 8B CE 44 88 6C 24 20 E8 (D+.E3.H..D.l$ . fffff800`02c0e080 CC 14 00 00 49 3B C5 74 2B 44 8B 8C 24 90 00 00 ....I;.t+D..$... fffff800`02c0e090 00 48 8B C8 41 8D 51 FF 41 3B D5 76 0D 44 8B C2 .H..A.Q.A;.v.D.. fffff800`02c0e0a0 49 83 E8 01 48 8B 49 08 75 F6 48 89 79 08 41 03 I...H.I.u.H.y.A. fffff800`02c0e0b0 D9 48 8B F8 3B DD 74 9A 44 38 AE 28 01 00 00 0F .H..;.t.D8.(.... fffff800`02c0e0c0 85 DF 00 00 00 48 8D 44 24 30 4C 8D 8C 24 A0 00 .....H.D$0L..$.. fffff800`02c0e0d0 00 00 4C 8D 84 24 A8 00 00 00 8B D5 48 8B CE 48 ..L..$......H..H fffff800`02c0e0e0 89 44 24 20 E8 F7 1F 00 00 8B F8 89 84 24 90 00 .D$ .........$.. fffff800`02c0e0f0 00 00 41 3B C5 0F 84 83 01 00 00 4C 8B A4 24 A8 ..A;.......L..$. fffff800`02c0e100 00 00 00 44 8B 84 24 A0 00 00 00 48 8B 8E 98 00 ...D..$....H.... fffff800`02c0e110 00 00 49 8B D4 44 8B C8 E8 DB 1B 00 00 49 3B C5 ..I..D.......I;. fffff800`02c0e120 74 35 48 8B 96 98 00 00 00 48 8D 84 24 90 00 00 t5H......H..$... fffff800`02c0e130 00 41 B1 01 48 89 44 24 28 44 8B C5 48 8B CE 44 .A..H.D$(D..H..D fffff800`02c0e140 88 6C 24 20 E8 43 12 00 00 49 3B C5 0F 84 2C 01 .l$ .C...I;...,. fffff800`02c0e150 00 00 E9 29 01 00 00 48 8B 5C 24 30 49 3B DD 74 ...)...H.\$0I;.t fffff800`02c0e160 2A 4D 3B E5 74 0C 48 8B D3 49 8B CC FF 15 AE CE *M;.t.H..I...... fffff800`02c0e170 01 00 48 8B CB FF 15 95 CF 01 00 33 D2 48 8B CB ..H........3.H.. fffff800`02c0e180 FF 15 AA CE 01 00 E9 F3 00 00 00 C1 E7 0C 41 B8 ..............A. fffff800`02c0e190 01 00 00 00 49 8B CC 8B D7 FF 15 99 CE 01 00 E9 ....I........... fffff800`02c0e1a0 DA 00 00 00 2B EB 33 C9 41 B8 48 61 6C 20 8B D5 ....+.3.A.Hal .. fffff800`02c0e1b0 44 8B FD 48 C1 E2 03 FF 15 33 D4 01 00 4C 8B F0 D..H.....3...L.. fffff800`02c0e1c0 49 3B C5 0F 84 8F 00 00 00 45 8B E5 41 3B ED 76 I;.......E..A;.v fffff800`02c0e1d0 3F 4C 8B E8 BA 00 10 00 00 B9 04 00 00 00 41 B8 ?L............A. fffff800`02c0e1e0 48 61 6C 20 FF 15 06 D4 01 00 49 89 45 00 48 85 Hal ......I.E.H. fffff800`02c0e1f0 C0 74 39 48 8B C8 FF 15 BC CE 01 00 48 C1 E8 20 .t9H........H.. fffff800`02c0e200 85 C0 75 28 41 FF C4 49 83 C5 08 44 3B E5 72 C4 ..u(A..I...D;.r. fffff800`02c0e210 48 8B 8E 98 00 00 00 44 8B C5 BA 01 00 00 00 E8 H......D........ fffff800`02c0e220 58 19 00 00 4C 8B E8 48 85 C0 75 6C 45 33 ED 45 X...L..H..ulE3.E fffff800`02c0e230 3B E5 76 19 49 8B EE 48 8B 4D 00 33 D2 FF 15 ED ;.v.I..H.M.3.... fffff800`02c0e240 CD 01 00 48 83 C5 08 49 83 EC 01 75 EA 33 D2 49 ...H...I...u.3.I fffff800`02c0e250 8B CE FF 15 D8 CD 01 00 41 3B DD 76 21 8B EB 48 ........A;.v!..H fffff800`02c0e260 8B 96 98 00 00 00 48 8B 5F 08 4C 8B C7 48 8B CE ......H._.L..H.. fffff800`02c0e270 E8 2B 15 00 00 48 83 ED 01 48 8B FB 75 E1 33 C0 .+...H...H..u.3. fffff800`02c0e280 48 8B 9C 24 98 00 00 00 48 83 C4 50 41 5F 41 5E H..$....H..PA_A^ fffff800`02c0e290 41 5D 41 5C 5F 5E 5D C3 8D 4D FF 85 C9 74 0C 8B A]A\_^]..M...t.. fffff800`02c0e2a0 D1 48 83 EA 01 48 8B 40 08 75 F6 48 89 78 08 49 [email protected] fffff800`02c0e2b0 8B FD 85 ED 74 29 49 8B DE 48 8B 0B FF 15 F6 CD ....t)I..H...... fffff800`02c0e2c0 01 00 41 89 45 00 48 8B 03 48 83 C3 08 48 83 C8 ..A.E.H..H...H.. fffff800`02c0e2d0 0F 49 83 EF 01 49 89 45 10 4D 8B 6D 08 75 DA 48 .I...I.E.M.m.u.H fffff800`02c0e2e0 8B 8E 98 00 00 00 48 8D 54 24 38 48 83 C1 78 FF ......H.T$8H..x. fffff800`02c0e2f0 15 83 CD 01 00 4C 8B 9E 98 00 00 00 48 8D 4C 24 .....L......H.L$ fffff800`02c0e300 38 41 01 AB D0 00 00 00 FF 15 3A CD 01 00 33 D2 8A........:...3. fffff800`02c0e310 49 8B CE FF 15 17 CD 01 00 E9 34 FD FF FF 90 90 I.........4..... fffff800`02c0e320 90 90 90 90 45 85 C0 74 43 48 89 5C 24 08 48 89 ....E..tCH.\$.H. fffff800`02c0e330 74 24 10 57 48 83 EC 20 48 8B F1 41 8B F8 48 8B t$.WH.. H..A..H. fffff800`02c0e340 5A 08 4C 8B C2 48 8B 96 98 00 00 00 48 8B CE E8 Z.L..H......H... fffff800`02c0e350 4C 14 00 00 48 83 EF 01 48 8B D3 75 E1 48 8B 5C L...H...H..u.H.\ fffff800`02c0e360 24 30 48 8B 74 24 38 48 83 C4 20 5F C3 90 90 90 $0H.t$8H.. _.... fffff800`02c0e370 90 90 90 90 48 8B C4 48 89 58 08 48 89 68 10 48 ....H..H.X.H.h.H fffff800`02c0e380 89 70 18 48 89 78 20 41 54 41 55 4C 8B D9 4D 8B .p.H.x ATAUL..M. fffff800`02c0e390 E0 48 8B F2 B9 FF 0F 00 00 4D 85 DB 75 08 4C 8B .H.......M..u.L. fffff800`02c0e3a0 D1 40 32 FF EB 12 4D 8B 93 88 00 00 00 41 8A BB [email protected].. fffff800`02c0e3b0 91 00 00 00 49 C1 EA 0C 44 8B 44 24 38 41 8B C1 ....I...D.D$8A.. fffff800`02c0e3c0 4C 2B 4E 20 23 C1 49 C1 E9 0C 41 BD 00 10 00 00 L+N #.I...A..... fffff800`02c0e3d0 41 8B D5 41 8B E9 2B D0 8B CA 4C 39 54 EE 30 76 A..A..+...L9T.0v fffff800`02c0e3e0 04 33 C9 EB 4F 41 3B D0 73 43 4C 8D 4C EE 38 4D .3..OA;.sCL.L.8M fffff800`02c0e3f0 39 11 77 39 49 8B 59 F8 48 8D 43 01 49 3B 01 75 9.w9I.Y.H.C.I;.u fffff800`02c0e400 2C 48 8B C3 49 33 01 48 A9 00 00 F0 FF 75 1E 40 ,H..I3.H.....u.@ fffff800`02c0e410 80 FF 01 74 0C 49 33 19 48 F7 C3 F0 FF FF FF 75 ...t.I3.H......u fffff800`02c0e420 0C 41 03 CD 49 83 C1 08 41 3B C8 72 C2 41 3B C8 .A..I...A;.r.A;. fffff800`02c0e430 41 0F 47 C8 4D 85 DB 0F 84 92 00 00 00 41 80 BB A.G.M........A.. fffff800`02c0e440 28 01 00 00 00 0F 84 84 00 00 00 4C 39 54 EE 30 (..........L9T.0 fffff800`02c0e450 76 7D 8B CA 48 8D 44 EE 38 41 3B D0 73 11 4C 39 v}..H.D.8A;.s.L9 fffff800`02c0e460 10 76 0C 41 03 CD 48 83 C0 08 41 3B C8 72 EF 49 .v.A..H...A;.r.I fffff800`02c0e470 8B 44 24 18 41 3B C8 44 8B 08 4C 8B 50 08 41 0F .D$.A;.D..L.P.A. fffff800`02c0e480 47 C8 41 C1 E9 0C EB 3A 45 8B 02 41 8D 41 01 41 G.A....:E..A.A.A fffff800`02c0e490 C1 E8 0C 44 3B C0 75 2E 41 8B C0 41 33 C1 A9 00 ...D;.u.A..A3... fffff800`02c0e4a0 00 F0 FF 75 21 40 80 FF 01 74 0D 41 8B C0 41 33 [email protected] fffff800`02c0e4b0 C1 A9 F0 FF FF FF 75 0E 4D 8B 52 08 45 8B C8 41 ......u.M.R.E..A fffff800`02c0e4c0 03 D5 3B D1 72 C2 3B D1 0F 47 D1 8B C2 EB 02 8B ..;.r.;..G...... fffff800`02c0e4d0 C1 48 8B 5C 24 18 48 8B 6C 24 20 48 8B 74 24 28 .H.\$.H.l$ H.t$( fffff800`02c0e4e0 48 8B 7C 24 30 41 5D 41 5C C3 90 90 90 90 90 90 H.|$0A]A\....... fffff800`02c0e4f0 48 89 5C 24 08 48 89 6C 24 10 48 89 74 24 18 57 H.\$.H.l$.H.t$.W fffff800`02c0e500 41 54 41 55 48 83 EC 30 48 8B 5C 24 70 4D 8B E1 ATAUH..0H.\$pM.. fffff800`02c0e510 49 8B F0 8B 03 4C 8B EA 48 8B E9 89 44 24 20 E8 I....L..H...D$ . fffff800`02c0e520 50 FE FF FF 49 8B CC 89 03 49 2B 4D 20 8B F8 48 P...I....I+M ..H fffff800`02c0e530 C1 E9 0C 8B C9 49 8B 54 CD 30 49 8B CC 48 C1 E2 .....I.T.0I..H.. fffff800`02c0e540 0C 81 E1 FF 0F 00 00 48 03 D1 48 85 F6 74 72 48 .......H..H..trH fffff800`02c0e550 39 95 88 00 00 00 73 69 4C 8B 4E 18 48 8B 84 24 9.....siL.N.H..$ fffff800`02c0e560 80 00 00 00 41 8B DC 41 8B 09 81 E3 FF 0F 00 00 ....A..A........ fffff800`02c0e570 03 CB 80 7C 24 78 01 48 89 08 75 17 4D 8B C4 49 ...|$x.H..u.M..I fffff800`02c0e580 8B D5 48 8B CD C6 44 24 28 01 89 7C 24 20 E8 C5 ..H...D$(..|$ .. fffff800`02c0e590 06 00 00 8B C7 C1 EF 0C 25 FF 0F 00 00 8D 8C 18 ........%....... fffff800`02c0e5a0 FF 0F 00 00 48 8B 46 18 C1 E9 0C 03 CF 74 0C 8B ....H.F......t.. fffff800`02c0e5b0 D1 48 83 EA 01 48 8B 40 08 75 F6 48 89 46 18 EB [email protected].. fffff800`02c0e5c0 0B 48 8B 84 24 80 00 00 00 48 89 10 48 8B 5C 24 .H..$....H..H.\$ fffff800`02c0e5d0 50 48 8B 6C 24 58 48 8B 74 24 60 48 83 C4 30 41 PH.l$XH.t$`H..0A fffff800`02c0e5e0 5D 41 5C 5F C3 90 90 90 90 90 90 90 4D 85 C0 0F ]A\_........M... fffff800`02c0e5f0 84 09 01 00 00 48 8B C4 48 89 58 08 48 89 68 10 .....H..H.X.H.h. fffff800`02c0e600 48 89 70 18 48 89 78 20 41 54 41 55 41 56 48 83 H.p.H.x ATAUAVH. fffff800`02c0e610 EC 30 44 8A 64 24 78 49 8B D8 49 8B F1 4C 8B EA .0D.d$xI..I..L.. fffff800`02c0e620 4C 8B F1 49 89 58 18 41 80 FC 01 0F 84 AF 00 00 L..I.X.A........ fffff800`02c0e630 00 8B 7C 24 70 85 FF 0F 84 9F 00 00 00 4C 8B CE ..|$p........L.. fffff800`02c0e640 4C 8B C3 49 8B D5 49 8B CE 89 7C 24 20 E8 22 FD L..I..I...|$ .". fffff800`02c0e650 FF FF 48 8B CE 49 2B 4D 20 8B E8 48 C1 E9 0C 8B ..H..I+M ..H.... fffff800`02c0e660 C9 49 8B 54 CD 30 48 8B CE 48 C1 E2 0C 81 E1 FF .I.T.0H..H...... fffff800`02c0e670 0F 00 00 48 03 D1 49 39 96 88 00 00 00 73 52 4C ...H..I9.....sRL fffff800`02c0e680 8B 4B 18 4C 8B C6 49 8B D5 49 8B CE 44 88 64 24 .K.L..I..I..D.d$ fffff800`02c0e690 28 89 6C 24 20 E8 BE 05 00 00 8B C5 44 8B DE 25 (.l$ .......D..% fffff800`02c0e6a0 FF 0F 00 00 41 81 E3 FF 0F 00 00 41 8D 8C 03 FF ....A......A.... fffff800`02c0e6b0 0F 00 00 8B C5 C1 E8 0C C1 E9 0C 03 C8 48 8B 43 .............H.C fffff800`02c0e6c0 18 74 0A 48 83 E9 01 48 8B 40 08 75 F6 48 89 43 [email protected] fffff800`02c0e6d0 18 48 03 F5 2B FD 0F 85 61 FF FF FF 48 89 5B 18 .H..+...a...H.[. fffff800`02c0e6e0 48 8B 5C 24 50 48 8B 6C 24 58 48 8B 74 24 60 48 H.\$PH.l$XH.t$`H fffff800`02c0e6f0 8B 7C 24 68 48 83 C4 30 41 5E 41 5D 41 5C C3 90 .|$hH..0A^A]A\.. fffff800`02c0e700 90 90 90 90 90 90 90 90 48 89 54 24 10 53 55 56 ........H.T$.SUV fffff800`02c0e710 57 41 54 41 55 41 56 41 57 48 83 EC 58 48 8B F2 WATAUAVAWH..XH.. fffff800`02c0e720 48 8B D9 48 8D 54 24 30 48 8D 0D B9 67 02 00 45 H..H.T$0H...g..E fffff800`02c0e730 8B E1 49 8B F8 4C 89 84 24 B0 00 00 00 FF 15 35 ..I..L..$......5 fffff800`02c0e740 C9 01 00 4C 8B 2D 86 67 02 00 4C 8B 35 77 67 02 ...L.-.g..L.5wg. fffff800`02c0e750 00 48 8B C6 44 8B C6 48 2B 43 20 41 81 E0 FF 0F .H..D..H+C A.... fffff800`02c0e760 00 00 BD 00 10 00 00 48 C1 E8 0C 45 89 45 2C 8B .......H...E.E,. fffff800`02c0e770 CD 8B C0 41 2B C8 41 89 4D 28 4C 8D 4C C3 30 48 ...A+.A.M(L.L.0H fffff800`02c0e780 8B C6 48 25 00 F0 FF FF 49 89 45 20 49 89 46 20 ..H%....I.E I.F fffff800`02c0e790 45 89 46 2C 41 89 4E 28 44 89 84 24 B8 00 00 00 E.F,A.N(D..$.... fffff800`02c0e7a0 4C 89 8C 24 A0 00 00 00 45 85 E4 0F 84 90 01 00 L..$....E....... fffff800`02c0e7b0 00 48 8B 5F 10 48 81 E3 00 F0 FF FF 75 3C 8B 07 .H._.H......u<.. fffff800`02c0e7c0 48 8B 0D 49 67 02 00 44 8D 4B 01 48 C1 E8 0C 4D H..Ig..D.K.H...M fffff800`02c0e7d0 8B C6 BA 48 61 6C 20 49 89 46 30 FF 15 DF C8 01 ...Hal I.F0..... fffff800`02c0e7e0 00 48 8B D8 48 85 C0 0F 84 36 01 00 00 4C 8B 8C .H..H....6...L.. fffff800`02c0e7f0 24 A0 00 00 00 41 B7 01 EB 09 41 8B C0 48 03 D8 $....A....A..H.. fffff800`02c0e800 45 32 FF 49 8B 01 33 FF 49 89 45 30 48 8B 0D C5 E2.I..3.I.E0H... fffff800`02c0e810 66 02 00 44 8B CF 4D 8B C5 BA 48 61 6C 20 FF 15 f..D..M...Hal .. fffff800`02c0e820 9C C8 01 00 48 8B F0 48 85 C0 75 24 FF C7 83 FF ....H..H..u$.... fffff800`02c0e830 06 7C D9 48 21 44 24 20 45 33 C9 41 B8 01 EF 00 .|.H!D$ E3.A.... fffff800`02c0e840 00 48 8B D5 B9 AC 00 00 00 FF 15 A1 CA 01 00 CC .H.............. fffff800`02c0e850 8B FD 2B BC 24 B8 00 00 00 44 3B E7 41 0F 42 FC ..+.$....D;.A.B. fffff800`02c0e860 80 BC 24 C0 00 00 00 01 8B EF 44 8B C7 75 0E 48 ..$.......D..u.H fffff800`02c0e870 8B D0 48 8B CB FF 15 AD 33 02 00 EB 0B 48 8B D3 ..H.....3....H.. fffff800`02c0e880 48 8B C8 E8 C8 A6 01 00 4D 8B C5 BA 48 61 6C 20 H.......M...Hal fffff800`02c0e890 48 8B CE FF 15 47 C8 01 00 41 80 FF 01 75 11 4D H....G...A...u.M fffff800`02c0e8a0 8B C6 BA 48 61 6C 20 48 8B CB FF 15 30 C8 01 00 ...Hal H....0... fffff800`02c0e8b0 48 8B 84 24 A8 00 00 00 4C 8B 8C 24 A0 00 00 00 H..$....L..$.... fffff800`02c0e8c0 44 2B E7 48 8B BC 24 B0 00 00 00 48 03 C5 BD 00 D+.H..$....H.... fffff800`02c0e8d0 10 00 00 48 8B 7F 08 49 83 C1 08 45 33 C0 44 3B ...H..I...E3.D; fffff800`02c0e8e0 E5 48 8B C8 41 8B D4 0F 47 D5 48 81 E1 00 F0 FF .H..A...G.H..... fffff800`02c0e8f0 FF 48 89 84 24 A8 00 00 00 49 89 4D 20 41 89 55 .H..$....I.M A.U fffff800`02c0e900 28 25 FF 0F 00 00 41 89 45 2C 49 89 4E 20 41 89 (%....A.E,I.N A. fffff800`02c0e910 46 2C 41 89 56 28 48 89 BC 24 B0 00 00 00 E9 75 F,A.V(H..$.....u fffff800`02c0e920 FE FF FF 48 83 64 24 20 00 45 33 C9 41 B8 00 EF ...H.d$ .E3.A... fffff800`02c0e930 00 00 48 8B D5 B9 AC 00 00 00 FF 15 B0 C9 01 00 ..H............. fffff800`02c0e940 CC 48 8D 4C 24 30 FF 15 FC C6 01 00 48 83 C4 58 .H.L$0......H..X fffff800`02c0e950 41 5F 41 5E 41 5D 41 5C 5F 5E 5D 5B C3 90 90 90 A_A^A]A\_^][.... fffff800`02c0e960 90 90 90 90 48 89 5C 24 08 48 89 6C 24 10 48 89 ....H.\$.H.l$.H. fffff800`02c0e970 74 24 18 57 41 54 41 55 48 83 EC 50 33 C0 49 8B t$.WATAUH..P3.I. fffff800`02c0e980 F9 41 8B F0 4C 8B E2 48 8B CA 49 C7 C3 00 F0 FF .A..L..H..I..... fffff800`02c0e990 FF 45 85 C0 74 10 4C 85 59 10 74 0A 48 8B 49 08 .E..t.L.Y.t.H.I. fffff800`02c0e9a0 FF C0 3B C6 72 F0 3B C6 75 09 49 83 21 00 E9 FB ..;.r.;.u.I.!... fffff800`02c0e9b0 00 00 00 65 48 8B 04 25 20 00 00 00 33 C9 44 8B ...eH..% ...3.D. fffff800`02c0e9c0 50 24 48 8B 05 F7 64 02 00 4A 8B 2C D0 4C 8D 4D P$H...d..J.,.L.M fffff800`02c0e9d0 30 45 85 C0 74 22 4C 8B C6 4C 85 5A 10 75 0F 8B 0E..t"L..L.Z.u.. fffff800`02c0e9e0 02 FF C1 48 C1 E8 0C 49 89 01 49 83 C1 08 49 83 ...H...I..I...I. fffff800`02c0e9f0 E8 01 48 8B 52 08 75 E1 33 DB C1 E1 0C 41 B5 01 ..H.R.u.3....A.. fffff800`02c0ea00 48 21 5D 20 21 5D 2C 89 4D 28 44 38 2D 07 65 02 H!] !],.M(D8-.e. fffff800`02c0ea10 00 75 10 48 8B 05 C6 64 02 00 4A 8B 1C D0 E9 29 .u.H...d..J....) fffff800`02c0ea20 01 00 00 48 8D 0D D6 64 02 00 FF 15 50 C6 01 00 ...H...d....P... fffff800`02c0ea30 48 85 C0 0F 85 F9 00 00 00 44 8D 40 01 45 33 C9 [email protected]. fffff800`02c0ea40 33 D2 48 8B CD C7 44 24 28 20 00 00 00 21 5C 24 3.H...D$( ...!\$ fffff800`02c0ea50 20 FF 15 71 C6 01 00 4C 8B D8 48 85 C0 74 69 45 ..q...L..H..tiE fffff800`02c0ea60 32 ED 49 8B D3 85 F6 74 36 48 8B CE 49 F7 44 24 2.I....t6H..I.D$ fffff800`02c0ea70 10 00 F0 FF FF 75 1D 41 8B 44 24 10 25 EF 0F 00 .....u.A.D$.%... fffff800`02c0ea80 00 48 0B C2 48 83 C8 10 48 81 C2 00 10 00 00 49 .H..H...H......I fffff800`02c0ea90 89 44 24 10 48 83 E9 01 4D 8B 64 24 08 75 CD 48 .D$.H...M.d$.u.H fffff800`02c0eaa0 89 2F 4C 89 5F 08 48 89 5F 10 44 88 6F 30 4C 8D ./L._.H._.D.o0L. fffff800`02c0eab0 5C 24 50 49 8B 5B 20 49 8B 6B 28 49 8B 73 30 49 \$PI.[ I.k(I.s0I fffff800`02c0eac0 8B E3 41 5D 41 5C 5F C3 48 8D 54 24 30 48 8D 0D ..A]A\_.H.T$0H.. fffff800`02c0ead0 4C 64 02 00 FF 15 66 C5 01 00 48 8B 15 FF 63 02 Ld....f...H...c. fffff800`02c0eae0 00 44 8B 0D 10 64 02 00 48 8B 02 B9 01 00 00 00 .D...d..H....... fffff800`02c0eaf0 44 8B 40 18 44 3B C9 76 1E 48 83 C2 08 48 8B 02 [email protected];.v.H...H.. fffff800`02c0eb00 44 39 40 18 7D 06 44 8B 40 18 8B D9 FF C1 48 83 D9@.}[email protected]. fffff800`02c0eb10 C2 08 41 3B C9 72 E6 48 8D 4C 24 30 FF 15 0E C6 ..A;.r.H.L$0.... fffff800`02c0eb20 01 00 48 8B 05 B7 63 02 00 44 8B DB 4A 8B 1C D8 ..H...c..D..J... fffff800`02c0eb30 EB 07 83 60 1C 00 48 8B D8 F0 83 43 18 01 48 8D ...`..H....C..H. fffff800`02c0eb40 57 18 48 8D 4B 20 FF 15 F4 C4 01 00 48 8B 4B 10 W.H.K ......H.K. fffff800`02c0eb50 41 B9 01 00 00 00 4C 8B C5 BA 48 61 6C 20 FF 15 A.....L...Hal .. fffff800`02c0eb60 5C C5 01 00 4C 8B D8 48 85 C0 0F 85 F2 FE FF FF \...L..H........ fffff800`02c0eb70 48 21 44 24 20 45 33 C9 BA 00 10 00 00 B9 AC 00 H!D$ E3......... fffff800`02c0eb80 00 00 41 B8 02 EF 00 00 FF 15 62 C7 01 00 CC 90 ..A.......b..... fffff800`02c0eb90 90 90 90 90 90 90 90 90 48 89 5C 24 08 48 89 6C ........H.\$.H.l fffff800`02c0eba0 24 18 48 89 74 24 20 57 48 83 EC 20 41 80 78 30 $.H.t$ WH.. A.x0 fffff800`02c0ebb0 00 49 8B F8 8B F2 48 8B D9 BD 01 00 00 00 75 0F .I....H.......u. fffff800`02c0ebc0 49 8B 10 49 8B 48 08 FF 15 53 C4 01 00 EB 4A 4D I..I.H...S....JM fffff800`02c0ebd0 8B 00 48 8B 4F 08 BA 48 61 6C 20 FF 15 FF C4 01 ..H.O..Hal ..... fffff800`02c0ebe0 00 80 3D 30 63 02 00 00 75 2F 48 8D 4F 18 FF 15 ..=0c...u/H.O... fffff800`02c0ebf0 3C C5 01 00 48 8B 57 10 83 C8 FF F0 0F C1 42 18 <...H.W.......B. fffff800`02c0ec00 83 C0 FF 75 14 F0 0F B1 6A 1C 75 0D 48 8D 0D ED ...u....j.u.H... fffff800`02c0ec10 62 02 00 FF 15 4F C4 01 00 85 F6 74 1E 48 8B CE b....O.....t.H.. fffff800`02c0ec20 F6 43 10 10 74 0C 8B 43 10 25 EF 0F 00 00 48 89 .C..t..C.%....H. fffff800`02c0ec30 43 10 48 2B CD 48 8B 5B 08 75 E5 48 8B 5C 24 30 C.H+.H.[.u.H.\$0 fffff800`02c0ec40 48 8B 6C 24 40 48 8B 74 24 48 48 83 C4 20 5F C3 [email protected]$HH.. _. fffff800`02c0ec50 90 90 90 90 90 90 90 90 48 89 5C 24 18 48 89 4C ........H.\$.H.L fffff800`02c0ec60 24 08 55 56 57 41 54 41 55 41 56 41 57 48 83 EC $.UVWATAUAVAWH.. fffff800`02c0ec70 70 4D 8B F1 4D 8B E8 48 8B F2 4C 8B D1 44 0F 20 pM..M..H..L..D. fffff800`02c0ec80 C7 F6 42 0A 05 74 06 48 8B 5A 18 EB 2A 45 33 C9 ..B..t.H.Z..*E3. fffff800`02c0ec90 33 D2 48 8B CE 45 8D 41 01 C7 44 24 28 20 00 00 3.H..E.A..D$( .. fffff800`02c0eca0 00 83 64 24 20 00 FF 15 1C C4 01 00 4C 8B 94 24 ..d$ .......L..$ fffff800`02c0ecb0 B0 00 00 00 48 8B D8 BD 02 00 00 00 48 85 DB 75 ....H.......H..u fffff800`02c0ecc0 4A 40 3A FD 76 1F 48 21 5C 24 20 45 33 C9 BA 00 J@:.v.H!\$ E3... fffff800`02c0ecd0 10 00 00 B9 AC 00 00 00 41 B8 05 EF 00 00 FF 15 ........A....... fffff800`02c0ece0 0C C6 01 00 CC 8A 84 24 D8 00 00 00 44 8B 8C 24 .......$....D..$ fffff800`02c0ecf0 D0 00 00 00 4D 8B C6 49 8B D5 48 8B CE 88 44 24 ....M..I..H...D$ fffff800`02c0ed00 20 E8 02 FA FF FF E9 4D 01 00 00 44 8B BC 24 D0 ......M...D..$. fffff800`02c0ed10 00 00 00 BA FF 0F 00 00 41 8B CD 23 CA 41 8B C7 ........A..#.A.. fffff800`02c0ed20 C6 84 24 B8 00 00 00 00 23 C2 44 8D A4 01 FF 0F ..$.....#.D..... fffff800`02c0ed30 00 00 41 8B C7 41 C1 EC 0C C1 E8 0C 44 03 E0 44 ..A..A......D..D fffff800`02c0ed40 89 64 24 30 40 3A FD 76 41 33 C9 49 8B C6 45 85 .d$0@:.vA3.I..E. fffff800`02c0ed50 E4 74 64 48 F7 40 10 00 F0 FF FF 74 0D 48 8B 40 [email protected].@ fffff800`02c0ed60 08 FF C1 41 3B CC 72 EB EB 4D 48 83 64 24 20 00 ...A;.r..MH.d$ .

  Read the article

• What is the practical use of IBOs / degenerate vertex in OpenGL?

  - by 0xFAIL

  Vertices in 3D models CAN get cut in the process of optimizing 3D geometry, (degenerate vertices) by 3D graphics software (Blender, ...) when exporting because they aren't needed when reusing a vertex for multiple triangles. (In the current case 3D data is exported from Blender as .ply and read by a simple application that displays the 3D model) Every vertex has a few attributes like position, color, normal, tangent,... But the data for each vertex that is cut through the vertex sharing is lost and is missing in the vertex shader. Modern shader techniques like Bump or Normal mapping require normals/tangents per vertex which are also cut. To use complex shader techniques IBOs must not be used? Or is there a way to use IBOs and retain the data per vertex that was origionally lost?

  Read the article

• Assigning a colour to imorted obj. files that are being used as default material

  - by Salino

  I am having a problem with assigning a colour to the different meshes that I have on one object. The technique that I have used is the first approach on this site. Is it possible to export a simulation (animation) from Blender to Unity? So what I would like to do is the following. I have about 107 meshes that are different frames from my shape key animation of my blender model. What I would like to have is that the first mesh will be bright green and up to the 40th mesh the colour turns to be white /greyish... the best would be if I could assign every mesh by hand a colour, however they are all default materials. And if I assign the object a colour, the whole "animation" is going to be in that colour

  Read the article

• Amazon EC2: Not able to open web application even if port it opened

  - by learner

  I have a t1.micro instance with public dns looks similar to ec2-184-72-67-202.compute-1.amazonaws.com (some numbers changed) On this machine, I am running a django app $ sudo python manage.py runserver --settings=vlists.settings.dev Validating models... 0 errors found Django version 1.4.1, using settings 'vlists.settings.dev' Development server is running at http://127.0.0.1:8000/ I have opened the port 8000 through AWS console Now when I hit the following in Chrome http://ec2-184-72-67-202.compute-1.amazonaws.com:8000, I get Oops! Google Chrome could not connect to WHat is that I am doing wrong?

  Read the article

• Gratuitous CRLF in Subject: line - why is it there, and is it legal?

  - by MadHatter

  I'm running into a problem with a NAGIOS system sending emails to a popular email-to-SMS service. The email-to-SMS service takes emails with text in the Subject: line, and sends them on to the mobile number encoded in the To: field. So far so good. Sadly, sendmail (and postfix before it) seem to be inserting a gratuitous CRLF into the (necessarily long) Subject: line, and that's causing my SMS messages to be truncated at the CRLF if and only if the Subject: line contains one or more colons past the gratuitous CRLF. I am confident that the messages are being created correctly, but just to be sure, here's me creating a completely noddy test message to myself, with a long Subject: line: echo "foo" | mail -s "1234567 101234567 201234567 301234567 401234567 501234567 601234567 701234567 801234567 90123456789" [email protected] Note there's no extra colon in this Subject: line; all I'm doing here is showing that an extra CRLF is inserted on the wire. Here's the result of sudo ngrep -x port 25: 44 61 74 65 3a 20 46 72    69 2c 20 33 31 20 4d 61    Date: Fri, 31 Ma 79 20 32 30 31 33 20 31    30 3a 34 33 3a 35 35 20    y 2013 10:43:55 2b 30 31 30 30 0d 0a 54    6f 3a 20 72 65 61 70 65    +0100..To: reape 72 40 74 65 61 70 61 72    74 79 2e 6e 65 74 0d 0a    [email protected].. 53 75 62 6a 65 63 74 3a    20 31 32 33 34 35 36 37    Subject: 1234567 20 31 30 31 32 33 34 35    36 37 20 32 30 31 32 33     101234567 20123 34 35 36 37 20 33 30 31    32 33 34 35 36 37 20 34    4567 301234567 4 30 31 32 33 34 35 36 37    20 35 30 31 32 33 34 35    01234567 5012345 36 37 0d 0a 20 36 30 31    32 33 34 35 36 37 20 37    67.. 601234567 7 30 31 32 33 34 35 36 37    20 38 30 31 32 33 34 35    01234567 8012345 36 37 20 39 30 31 32 33    34 35 36 37 38 39 0d 0a    67 90123456789.. 55 73 65 72 2d 41 67 65    6e 74 3a 20 48 65 69 72    User-Agent: Heir 6c 6f 6f 6d 20 6d 61 69    6c 78 20 31 32 2e 34 20    loom mailx 12.4 37 2f 32 39 2f 30 38 0d    0a 4d 49 4d 45 2d 56 65    7/29/08..MIME-Ve 72 73 69 6f 6e 3a 20 31    2e 30 0d 0a 43 6f 6e 74    rsion: 1.0..Cont 65 6e 74 2d 54 79 70 65    3a 20 74 65 78 74 2f 70    ent-Type: text/p 6c 61 69 6e 3b 20 63 68    61 72 73 65 74 3d 75 73    lain; charset=us About half way down (marked in bold+italic), between the 501234567 and the 601234567 in the original Subject: header, you can see a CRLF being inserted (0x0d 0x0a, on the left-hand side hex dump, .. on the right-hand side plain text). The receiving MTA seems happy to post-process this, and when I look at the on-disc stored mail at the receiving end, I see only a LF (0x0a) in the Subject: line, and the line is parsed correctly and in its entirety by, eg, alpine. Nevertheless, the CRLF is there on the wire, and between me and the (excellent) email-to-SMS support people, we've established that these are the cause of the problem. So my question is: is it lawful for an MTA to insert a gratuitous CRLF on the wire? If it is, and I can prove it, then it's the email-to-SMS house's problem, because they are being intolerant. If it isn't, or it is but I can't prove it, then it becomes my problem, so an answer with references would be most useful. Edit: I can now come clean that the email-to-SMS service in question is kapow. Once this problem was explained to them, they got it, worked with me to develop and test a fix, and have deployed the fix. My long subject lines with colons in now get relayed correctly into SMSes. I don't normally trumpet individual companies, especially not on SF, but I thought it worthy of note that kapow Did The Right Thing. (Disclaimer: I have no connection with kapow except as a paying customer who's happy about the way they dealt with his problem.)

  Read the article

• Cannot ping router with a static IP assigned?

  - by Uriah

  Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

  Read the article

• Troubleshoot Perl module installation on Mac OS X

  - by Daniel Standage

  I'm trying to install the Perl module Set::IntervalTree on Mac OS X. I recently installed it today on an Ubuntu box with no problem. I simply started cpan, entered install Set:IntervalTree, and it all worked out. However, the installation failed on Mac OS X--it spits out a huge list of compiler errors (below). How would I troubleshoot this. I don't even know where to begin. cpan[1]> install Set::IntervalTree CPAN: Storable loaded ok (v2.18) Going to read /Users/standage/.cpan/Metadata Database was generated on Fri, 14 Jan 2011 02:58:42 GMT CPAN: YAML loaded ok (v0.72) Going to read /Users/standage/.cpan/build/ ............................................................................DONE Found 1 old build, restored the state of 1 Running install for module 'Set::IntervalTree' Running make for B/BE/BENBOOTH/Set-IntervalTree-0.01.tar.gz CPAN: Digest::SHA loaded ok (v5.45) CPAN: Compress::Zlib loaded ok (v2.008) Checksum for /Users/standage/.cpan/sources/authors/id/B/BE/BENBOOTH/Set-IntervalTree-0.01.tar.gz ok Scanning cache /Users/standage/.cpan/build for sizes ............................................................................DONE x Set-IntervalTree-0.01/ x Set-IntervalTree-0.01/src/ x Set-IntervalTree-0.01/src/Makefile x Set-IntervalTree-0.01/src/interval_tree.h x Set-IntervalTree-0.01/src/test_main.cc x Set-IntervalTree-0.01/lib/ x Set-IntervalTree-0.01/lib/Set/ x Set-IntervalTree-0.01/lib/Set/IntervalTree.pm x Set-IntervalTree-0.01/Changes x Set-IntervalTree-0.01/MANIFEST x Set-IntervalTree-0.01/t/ x Set-IntervalTree-0.01/t/Set-IntervalTree.t x Set-IntervalTree-0.01/typemap x Set-IntervalTree-0.01/perlobject.map x Set-IntervalTree-0.01/IntervalTree.xs x Set-IntervalTree-0.01/Makefile.PL x Set-IntervalTree-0.01/README x Set-IntervalTree-0.01/META.yml CPAN: File::Temp loaded ok (v0.18) CPAN.pm: Going to build B/BE/BENBOOTH/Set-IntervalTree-0.01.tar.gz Checking if your kit is complete... Looks good Writing Makefile for Set::IntervalTree cp lib/Set/IntervalTree.pm blib/lib/Set/IntervalTree.pm AutoSplitting blib/lib/Set/IntervalTree.pm (blib/lib/auto/Set/IntervalTree) /usr/bin/perl /System/Library/Perl/5.10.0/ExtUtils/xsubpp -C++ -typemap /System/Library/Perl/5.10.0/ExtUtils/typemap -typemap perlobject.map -typemap typemap IntervalTree.xs > IntervalTree.xsc && mv IntervalTree.xsc IntervalTree.c g++ -c -Isrc -arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include -g -O0 -DVERSION=\"0.01\" -DXS_VERSION=\"0.01\" "-I/System/Library/Perl/5.10.0/darwin-thread-multi-2level/CORE" -Isrc IntervalTree.c In file included from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/bits/locale_facets.h:4420:40: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/bits/locale_facets.h:4467:34: error: macro "do_close" requires 2 arguments, but only 1 given /usr/include/c++/4.2.1/bits/locale_facets.h:4486:55: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/bits/locale_facets.h:4513:23: error: macro "do_close" requires 2 arguments, but only 1 given In file included from /usr/include/c++/4.2.1/bits/locale_facets.h:4599, from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:58:38: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:67:71: error: macro "do_open" requires 7 arguments, but only 2 given /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:78:39: error: macro "do_close" requires 2 arguments, but only 1 given In file included from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/bits/locale_facets.h:4486: error: ‘do_open’ declared as a ‘virtual’ field /usr/include/c++/4.2.1/bits/locale_facets.h:4486: error: expected ‘;’ before ‘const’ /usr/include/c++/4.2.1/bits/locale_facets.h:4513: error: variable or field ‘do_close’ declared void /usr/include/c++/4.2.1/bits/locale_facets.h:4513: error: expected ‘;’ before ‘const’ In file included from /usr/include/c++/4.2.1/bits/locale_facets.h:4599, from /usr/include/c++/4.2.1/bits/basic_ios.h:44, from /usr/include/c++/4.2.1/ios:50, from /usr/include/c++/4.2.1/ostream:45, from /usr/include/c++/4.2.1/iostream:45, from IntervalTree.xs:16: /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:67: error: expected initializer before ‘const’ /usr/include/c++/4.2.1/i686-apple-darwin10/x86_64/bits/messages_members.h:78: error: expected initializer before ‘const’ In file included from IntervalTree.xs:19: src/interval_tree.h:95: error: type/value mismatch at argument 1 in template parameter list for ‘template<class _Tp, class _Alloc> class std::vector’ src/interval_tree.h:95: error: expected a type, got ‘IntervalTree<T,N>::it_recursion_node’ src/interval_tree.h:95: error: template argument 2 is invalid src/interval_tree.h: In constructor ‘IntervalTree<T, N>::IntervalTree()’: src/interval_tree.h:130: error: expected type-specifier src/interval_tree.h:130: error: expected `;' src/interval_tree.h:135: error: expected type-specifier src/interval_tree.h:135: error: expected `;' src/interval_tree.h:141: error: request for member ‘push_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h: In member function ‘void IntervalTree<T, N>::LeftRotate(IntervalTree<T, N>::Node*)’: src/interval_tree.h:178: error: ‘y’ was not declared in this scope src/interval_tree.h: In member function ‘void IntervalTree<T, N>::RightRotate(IntervalTree<T, N>::Node*)’: src/interval_tree.h:240: error: ‘x’ was not declared in this scope src/interval_tree.h: In member function ‘void IntervalTree<T, N>::TreeInsertHelp(IntervalTree<T, N>::Node*)’: src/interval_tree.h:298: error: ‘x’ was not declared in this scope src/interval_tree.h:299: error: ‘y’ was not declared in this scope src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N)’: src/interval_tree.h:375: error: ‘y’ was not declared in this scope src/interval_tree.h:376: error: ‘x’ was not declared in this scope src/interval_tree.h:377: error: ‘newNode’ was not declared in this scope src/interval_tree.h:379: error: expected type-specifier src/interval_tree.h:379: error: expected `;' src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::GetSuccessorOf(IntervalTree<T, N>::Node*) const’: src/interval_tree.h:450: error: ‘y’ was not declared in this scope src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::GetPredecessorOf(IntervalTree<T, N>::Node*) const’: src/interval_tree.h:483: error: ‘y’ was not declared in this scope src/interval_tree.h: In destructor ‘IntervalTree<T, N>::~IntervalTree()’: src/interval_tree.h:546: error: ‘x’ was not declared in this scope src/interval_tree.h:547: error: type/value mismatch at argument 1 in template parameter list for ‘template<class _Tp, class _Alloc> class std::vector’ src/interval_tree.h:547: error: expected a type, got ‘(IntervalTree<T,N>::Node * <expression error>)’ src/interval_tree.h:547: error: template argument 2 is invalid src/interval_tree.h:547: error: invalid type in declaration before ‘;’ token src/interval_tree.h:551: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:554: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:557: error: request for member ‘empty’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:558: error: request for member ‘back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:559: error: request for member ‘pop_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:561: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h:564: error: request for member ‘push_back’ in ‘stuffToFree’, which is of non-class type ‘int’ src/interval_tree.h: In member function ‘void IntervalTree<T, N>::DeleteFixUp(IntervalTree<T, N>::Node*)’: src/interval_tree.h:613: error: ‘w’ was not declared in this scope src/interval_tree.h:614: error: ‘rootLeft’ was not declared in this scope src/interval_tree.h: In member function ‘T IntervalTree<T, N>::remove(IntervalTree<T, N>::Node*)’: src/interval_tree.h:697: error: ‘y’ was not declared in this scope src/interval_tree.h:698: error: ‘x’ was not declared in this scope src/interval_tree.h: In member function ‘std::vector<T, std::allocator<_CharT> > IntervalTree<T, N>::fetch(N, N)’: src/interval_tree.h:819: error: ‘x’ was not declared in this scope src/interval_tree.h:833: error: invalid types ‘int[size_t]’ for array subscript src/interval_tree.h:836: error: request for member ‘push_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:837: error: request for member ‘back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:838: error: request for member ‘back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:839: error: request for member ‘back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:840: error: request for member ‘size’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:846: error: request for member ‘size’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:847: error: expected `;' before ‘back’ src/interval_tree.h:848: error: request for member ‘pop_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:850: error: ‘back’ was not declared in this scope src/interval_tree.h:853: error: invalid types ‘int[size_t]’ for array subscript IntervalTree.c: In function ‘void boot_Set__IntervalTree(PerlInterpreter*, CV*)’: IntervalTree.c:365: warning: deprecated conversion from string constant to ‘char*’ src/interval_tree.h: In constructor ‘IntervalTree<T, N>::IntervalTree() [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.c:67: instantiated from here src/interval_tree.h:130: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment src/interval_tree.h:135: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment ...blah blah blah... ...blah blah blah... ...blah blah blah... ...blah blah blah... ...blah blah blah... ...blah blah blah... src/interval_tree.h:848: error: request for member ‘pop_back’ in ‘((IntervalTree<T, N>*)this)->IntervalTree<T, N>::recursionNodeStack’, which is of non-class type ‘int’ src/interval_tree.h:850: error: ‘back’ was not declared in this scope src/interval_tree.h:853: error: invalid types ‘int[size_t]’ for array subscript IntervalTree.c: In function ‘void boot_Set__IntervalTree(PerlInterpreter*, CV*)’: IntervalTree.c:365: warning: deprecated conversion from string constant to ‘char*’ src/interval_tree.h: In constructor ‘IntervalTree<T, N>::IntervalTree() [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.c:67: instantiated from here src/interval_tree.h:130: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment src/interval_tree.h:135: error: cannot convert ‘int*’ to ‘IntervalTree<std::tr1::shared_ptr<sv>, long int>::Node*’ in assignment src/interval_tree.h: In member function ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.xs:57: instantiated from here src/interval_tree.h:375: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:375: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h:376: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:376: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h:377: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:377: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘std::vector<T, std::allocator<_CharT> > IntervalTree<T, N>::fetch(N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.xs:65: instantiated from here src/interval_tree.h:819: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:819: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant IntervalTree.xs:65: instantiated from here src/interval_tree.h:847: error: dependent-name ‘IntervalTree<T,N>::it_recursion_node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:847: note: say ‘typename IntervalTree<T,N>::it_recursion_node’ if a type is meant src/interval_tree.h: In destructor ‘IntervalTree<T, N>::~IntervalTree() [with T = std::tr1::shared_ptr<sv>, N = long int]’: IntervalTree.c:205: instantiated from here src/interval_tree.h:546: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:546: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘void IntervalTree<T, N>::TreeInsertHelp(IntervalTree<T, N>::Node*) [with T = std::tr1::shared_ptr<sv>, N = long int]’: src/interval_tree.h:380: instantiated from ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’ IntervalTree.xs:57: instantiated from here src/interval_tree.h:298: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:298: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h:299: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:299: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘void IntervalTree<T, N>::LeftRotate(IntervalTree<T, N>::Node*) [with T = std::tr1::shared_ptr<sv>, N = long int]’: src/interval_tree.h:395: instantiated from ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’ IntervalTree.xs:57: instantiated from here src/interval_tree.h:178: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:178: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant src/interval_tree.h: In member function ‘void IntervalTree<T, N>::RightRotate(IntervalTree<T, N>::Node*) [with T = std::tr1::shared_ptr<sv>, N = long int]’: src/interval_tree.h:399: instantiated from ‘typename IntervalTree<T, N>::Node* IntervalTree<T, N>::insert(const T&, N, N) [with T = std::tr1::shared_ptr<sv>, N = long int]’ IntervalTree.xs:57: instantiated from here src/interval_tree.h:240: error: dependent-name ‘IntervalTree<T,N>::Node’ is parsed as a non-type, but instantiation yields a type src/interval_tree.h:240: note: say ‘typename IntervalTree<T,N>::Node’ if a type is meant lipo: can't open input file: /var/tmp//ccLthuaw.out (No such file or directory) make: *** [IntervalTree.o] Error 1 BENBOOTH/Set-IntervalTree-0.01.tar.gz make -- NOT OK Running make test Can't test without successful make Running make install Make had returned bad status, install seems impossible Failed during this command: BENBOOTH/Set-IntervalTree-0.01.tar.gz : make NO

  Read the article

• Linux router: ping doesn't route back

  - by El Barto

  I have a Debian box which I'm trying to set up as a router and an Ubuntu box which I'm using as a client. My problem is that when the Ubuntu client tries to ping a server on the Internet, all the packets are lost (though, as you can see below, they seem to go to the server and back without problem). I'm doing this in the Ubuntu Box: # ping -I eth1 my.remote-server.com PING my.remote-server.com (X.X.X.X) from 10.1.1.12 eth1: 56(84) bytes of data. ^C --- my.remote-server.com ping statistics --- 13 packets transmitted, 0 received, 100% packet loss, time 12094ms (I changed the name and IP of the remote server for privacy). From the Debian Router I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 7, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 8, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 8, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 9, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 9, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 10, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 10, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 305, seq 11, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 305, seq 11, length 64 ^C 9 packets captured 9 packets received by filter 0 packets dropped by kernel # tcpdump -i eth2 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 213, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 213, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 214, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 214, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 215, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 215, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 216, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 216, length 64 IP 192.168.1.10 > X.X.X.X: ICMP echo request, id 360, seq 217, length 64 IP X.X.X.X > 192.168.1.10: ICMP echo reply, id 360, seq 217, length 64 ^C 10 packets captured 10 packets received by filter 0 packets dropped by kernel And at the remote server I see this: # tcpdump -i eth0 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 1, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 1, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 2, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 2, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 3, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 3, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 4, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 4, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 5, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 5, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 6, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 6, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 7, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 7, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 8, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 8, length 64 IP Y.Y.Y.Y > X.X.X.X: ICMP echo request, id 360, seq 9, length 64 IP X.X.X.X > Y.Y.Y.Y: ICMP echo reply, id 360, seq 9, length 64 18 packets captured 228 packets received by filter 92 packets dropped by kernel Here "X.X.X.X" is my remote server's IP and "Y.Y.Y.Y" is my local network's public IP. So, what I understand is that the ping packets are coming out of the Ubuntu box (10.1.1.12), to the router (10.1.1.1), from there to the next router (192.168.1.1) and reaching the remote server (X.X.X.X). Then they come back all the way to the Debian router, but they never reach the Ubuntu box back. What am I missing? Here's the Debian router setup: # ifconfig eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:105761 errors:0 dropped:0 overruns:0 frame:0 TX packets:48944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40298768 (38.4 MiB) TX bytes:44831595 (42.7 MiB) Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38335992 errors:0 dropped:0 overruns:0 frame:0 TX packets:37097705 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:4260680226 (3.9 GiB) TX bytes:3759806551 (3.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3408 errors:0 dropped:0 overruns:0 frame:0 TX packets:3408 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:358445 (350.0 KiB) TX bytes:358445 (350.0 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:2767779 errors:0 dropped:0 overruns:0 frame:0 TX packets:1569477 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3609469393 (3.3 GiB) TX bytes:96113978 (91.6 MiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Ubuntu box (on 10.1.1.12 and 192.168.1.12) Address HWtype HWaddress Flags Mask Iface 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.102 ether NN:NN:NN:NN:NN:NN C eth2 10.1.1.12 ether 00:1e:67:15:2b:f0 C eth1 192.168.1.86 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.2 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.40 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.12 ether 00:1e:67:15:2b:f1 C eth2 192.168.1.77 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.41 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth2 192.168.1.123 ether NN:NN:NN:NN:NN:NN C eth2 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 10.1.1.0/24 !10.1.1.0/24 MASQUERADE all -- !10.1.1.0/24 10.1.1.0/24 Chain OUTPUT (policy ACCEPT) target prot opt source destination And here's the Ubuntu box: # ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f1 inet addr:192.168.1.12 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28785139 errors:0 dropped:0 overruns:0 frame:0 TX packets:19050735 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32068182803 (32.0 GB) TX bytes:6061333280 (6.0 GB) Interrupt:16 Memory:b1a00000-b1a20000 eth1 Link encap:Ethernet HWaddr 00:1e:67:15:2b:f0 inet addr:10.1.1.12 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe15:2bf0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:285086 errors:0 dropped:0 overruns:0 frame:0 TX packets:12719 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30817249 (30.8 MB) TX bytes:2153228 (2.1 MB) Interrupt:16 Memory:b1900000-b1920000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:86048 errors:0 dropped:0 overruns:0 frame:0 TX packets:86048 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11426538 (11.4 MB) TX bytes:11426538 (11.4 MB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.1.1 0.0.0.0 UG 100 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.8.0.0 192.168.1.10 255.255.255.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 # arp -n # Note: Here I have changed all the different MACs except the ones corresponding to the Debian box (on 10.1.1.1 and 192.168.1.10) Address HWtype HWaddress Flags Mask Iface 192.168.1.70 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.90 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.97 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.103 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.13 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.120 (incomplete) eth0 192.168.1.111 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.118 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.51 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.102 (incomplete) eth0 192.168.1.64 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.52 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.74 (incomplete) eth0 192.168.1.94 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.121 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.72 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.87 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.91 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.71 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.78 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.83 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.88 (incomplete) eth0 192.168.1.82 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.98 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.100 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.93 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.73 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.11 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.85 (incomplete) eth0 192.168.1.112 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.89 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.65 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.81 ether NN:NN:NN:NN:NN:NN C eth0 10.1.1.1 ether 94:0c:6d:82:0d:98 C eth1 192.168.1.53 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.116 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.61 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.10 ether 6c:f0:49:a4:47:38 C eth0 192.168.1.86 (incomplete) eth0 192.168.1.119 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.66 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth0 192.168.1.1 ether NN:NN:NN:NN:NN:NN C eth1 192.168.1.92 ether NN:NN:NN:NN:NN:NN C eth0 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination Edit: Following Patrick's suggestion, I did a tcpdump con the Ubuntu box and I see this: # tcpdump -i eth1 -qtln icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth1, link-type EN10MB (Ethernet), capture size 65535 bytes IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 1, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 1, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 2, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 2, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 3, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 3, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 4, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 4, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 5, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 5, length 64 IP 10.1.1.12 > X.X.X.X: ICMP echo request, id 21967, seq 6, length 64 IP X.X.X.X > 10.1.1.12: ICMP echo reply, id 21967, seq 6, length 64 ^C 12 packets captured 12 packets received by filter 0 packets dropped by kernel So the question is: if all packets seem to be coming and going, why does ping report 100% packet loss?

  Read the article

• how do i fix this: the networking and wireless are enabled. but list of networks under wireless networks not available

  - by Ayesha Ahmad

  i started working with ubuntu 11.10 last year. i upgraded to 12.04 a week back. since then i have had all sorts of problems with network connection. first had to install the new driver. the hardware switch somehow got disabled then the above problem arrived. even tho the options are all enabled, the OS is not able to detect scan available network connections. also i have to bring to notice that once in a while it does get connected, can not explain how it happens. I want to fix this problem once and for all. please help. ifconfig: eth0 Link encap:Ethernet HWaddr f0:4d:a2:51:b3:c8 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:44 eth1 Link encap:Ethernet HWaddr 1c:65:9d:67:d5:e1 inet6 addr: fe80::1e65:9dff:fe67:d5e1/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:170 TX packets:0 errors:27 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:344 errors:0 dropped:0 overruns:0 frame:0 TX packets:344 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20336 (20.3 KB) TX bytes:20336 (20.3 KB) lshw -c network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 1c:65:9d:67:d5:e1 width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: f0:4d:a2:51:b3:c8 capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:196 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) I hope this information is of some help.

  Read the article

• Upgraded to 12.04 now wifi doesn't work

  - by Benito Kestelman

  My laptop's wifi stopped working when I upgraded to Ubuntu 12.04 (wired works). I just reinstalled 12.04 over my old 12.04 on which wifi didn't work either in an attempt to restore any settings I may have accidentally changed, but it still doesn't work. I also used a wired connection to install updates in case this bug has been fixed, but it has not. Here is the result of sudo lshw -class network: *-network description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 67 serial: 40:25:c2:5f:5b:f4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-29-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:51 memory:de800000-de801fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 14:da:e9:c0:da:78 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:54 memory:dd400000-dd43ffff ioport:a000(size=128) Here is rfkill list all: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-wimax: WiMAX Soft blocked: no Hard blocked: no lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 8087:07d6 Intel Corp. Bus 001 Device 004: ID 13d3:5710 IMC Networks Bus 002 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 003 Device 003: ID 0781:5530 SanDisk Corp. Cruzer lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) 03:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller 04:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0)

  Read the article

• Finding objects in J2ME M3G

  - by Jani

  I'm using Blender to create m3g files and then I load them in a java program. Which is the best way to find an object in the World? Should I create separate classes for every object and then add them to one World object or should I assign IDs to the objects in Blender and find them in the program by ID? Or export every object to a separate M3G file? (Or some other way?)

  Read the article

• Error converting JSON to .Net object in asp.net

  - by Vinni

  Hello Guys, I am unable to convert JSON string to .net object in asp.net. I am sending JSON string from client to server using hidden field (by keeping the JSON object.Tostring() in hidden field and reading the hidden field value in code behind file) Json string/ Object: [[{"OfferId":"1","OrderValue":"11","HostingTypeID":"3"}, {"OfferId":"1","OrderValue":"11","HostingTypeID":"3"}, {"OfferId":"1","OrderValue":"11","HostingTypeID":"3"}, {"OfferId":"1","OrderValue":"2","HostingTypeID":"3"}, {"OfferId":"1","OrderValue":"2","HostingTypeID":"3"}, {"OfferId":"1","OrderValue":"67","HostingTypeID":"3"}, {"OfferId":"1","OrderValue":"67","HostingTypeID":"3"}], [{"OfferId":"1","OrderValue":"99","HostingTypeID":"6"}], [{"OfferId":"1","OrderValue":"10","HostingTypeID":"8"}]] .Net Object public class JsonFeaturedOffer { public string OfferId { get; set; } public string OrderValue { get; set; } public string HostingTypeID { get; set; } } Converstion code in code behind file byte[] byteArray = Encoding.ASCII.GetBytes(HdnJsonData.Value); MemoryStream stream = new MemoryStream(byteArray); DataContractJsonSerializer serializer = new DataContractJsonSerializer(typeof(JsonFeaturedOffer)); object result= serializer.ReadObject(stream); JsonFeaturedOffer jsonObj = result as JsonFeaturedOffer; While converting i am getting following error: Expecting element 'root' from namespace ''.. Encountered 'None' with name '', namespace ''.

  Read the article

• Using NSNumberFormatter to get a decimal value from an international currency string

  - by Duncan A

  It seems that the NSNumberFormatter can't parse Euro (and probably other) currency strings into a numerical type. Can someone please prove me wrong. I'm attempting to use the following to get a numeric amount from a currency string: NSNumberFormatter *currencyFormatter = [[[NSNumberFormatter alloc] init] autorelease]; [currencyFormatter setNumberStyle:NSNumberFormatterCurrencyStyle]; NSNumber *currencyNumber = [currencyFormatter numberFromString:currencyString]; This works fine for UK and US currency amounts. It even deals with $ and £ and thousands separators with no problems. However, when I use it with euro currency amounts (with the Region Format set to France or Germany in the settings app) it returns an empty string. All of the following strings fail: 12,34 € 12,34 12.345,67 € 12.345,67 It's worth noting that these strings match exactly what comes out of the NSNumberFormatter's stringFromNumber method when using the corresponding locale. Setting the Region Format to France in the settings app, then setting currencyNumber to 12.34 in the following code, results in currencyString being set to '12,34 €' : NSNumberFormatter *currencyFormatter = [[[NSNumberFormatter alloc] init] autorelease]; [currencyFormatter setNumberStyle:NSNumberFormatterCurrencyStyle]; NSString *currencyString = [currencyFormatter stringFromNumber:currencyNumber]; It would obviously be fairly easy to hack around this problem specifically for the Euro but I'm hoping to sell this app in as many countries as possible and I'm thinking that a similar situation is bound to occur with other locales. Does anyone have an answer? TIA, Duncan

  Read the article

• DrScheme versus mzscheme: treatment of definitions

  - by speciousfool

  One long term project I have is working through all the exercises of SICP. I noticed something a bit odd with the most recent exercise. I am testing a Huffman encoding tree. When I execute the following code in DrScheme I get the expected result: (a d a b b c a) However, if I execute this same code in mzscheme by calling (load "2.67.scm") or by running mzscheme -f 2.67.scm, it reports: symbols: expected symbols as arguments, given: (leaf D 1) My question is: why? Is it because mzscheme and drscheme use different rules for loading program definitions? The program code is below. ;; Define an encoding tree and a sample message ;; Use the decode procedure to decode the message, and give the result. (define (make-leaf symbol weight) (list 'leaf symbol weight)) (define (leaf? object) (eq? (car object) 'leaf)) (define (symbol-leaf x) (cadr x)) (define (weight-leaf x) (caddr x)) (define (make-code-tree left right) (list left right (append (symbols left) (symbols right)) (+ (weight left) (weight right)))) (define (left-branch tree) (car tree)) (define (right-branch tree) (cadr tree)) (define (symbols tree) (if (leaf? tree) (list (symbol-leaf tree)) (caddr tree))) (define (weight tree) (if (leaf? tree) (weight-leaf tree) (cadddr tree))) (define (decode bits tree) (define (decode-1 bits current-branch) (if (null? bits) '() (let ((next-branch (choose-branch (car bits) current-branch))) (if (leaf? next-branch) (cons (symbol-leaf next-branch) (decode-1 (cdr bits) tree)) (decode-1 (cdr bits) next-branch))))) (decode-1 bits tree)) (define (choose-branch bit branch) (cond ((= bit 0) (left-branch branch)) ((= bit 1) (right-branch branch)) (else (error "bad bit -- CHOOSE-BRANCH" bit)))) (define (test s-exp) (display s-exp) (newline)) (define sample-tree (make-code-tree (make-leaf 'A 4) (make-code-tree (make-leaf 'B 2) (make-code-tree (make-leaf 'D 1) (make-leaf 'C 1))))) (define sample-message '(0 1 1 0 0 1 0 1 0 1 1 1 0)) (test (decode sample-message sample-tree))

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >