Search Results

Search found 1940 results on 78 pages for 'bulletin board'.

Page 13/78 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • What does "general purpose system" mean for Java SE Embedded?

    - by Majid Azimi
    The Oracle website says this about Java SE Embedded license: development is free, but royalties are required upon deployment on anything other than general purpose systems What does "general purpose system" mean here? We have a sensor network around the country. On each box we have installed, there is a micro controller based board that gets data from the environment and send data on serial port to a ARM based embedded board. On this board system there is a Java process which reads and submits data to our central server using JMS. Is this categorized as general purpose system? Sorry I'm asking this here. We are in Iran, there is no Oracle office here to ask.

    Read the article

  • Get Hands On with Raspberry Pi via Free OS-Building Course

    - by Jason Fitzpatrick
    Cambridge University is now offering a free 12-segment course that will guide you through building an OS from scratch for the tiny Raspberry Pi development board–learn the ins and outs of basic OS design on the cheap. You’ll need a Raspberry Pi board, a computer running Windows, OS X, or Linux, and an SD card, as well as a small amount of free software. The 12-part tutorial starts you off with basic OS theory and then walks you through basic control of the board, graphics manipulation, and, finally, creating a command line interface for your new operating system. Hit up the link below to read more and check out the lessons. Baking Pi – Operating Systems Development HTG Explains: What The Windows Event Viewer Is and How You Can Use It HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows?

    Read the article

  • Is chess-like AI really inapplicable in turn-based strategy games?

    - by Joh
    Obviously, trying to apply the min-max algorithm on the complete tree of moves works only for small games (I apologize to all chess enthusiasts, by "small" I do not mean "simplistic"). For typical turn-based strategy games where the board is often wider than 100 tiles and all pieces in a side can move simultaneously, the min-max algorithm is inapplicable. I was wondering if a partial min-max algorithm which limits itself to N board configurations at each depth couldn't be good enough? Using a genetic algorithm, it might be possible to find a number of board configurations that are good wrt to the evaluation function. Hopefully, these configurations might also be good wrt to long-term goals. I would be surprised if this hasn't been thought of before and tried. Has it? How does it work?

    Read the article

  • Ouverture officielle du forum d'entraide sur la programmation des systèmes embarqués

    Nous avons le plaisir de vous annoncer la création du forum programmation système embarqué. Le but de ce forum est de regrouper les sujets liés à l'embarqué et aux problématiques bas niveau. Il s'agit donc globalement de la frontière logiciel / matériel pour laquelle il est bien souvent difficile de savoir où poser sa question sur DVP. Voici donc une liste non exhaustive de sujets que nous pouvons traiter : Développement sur microcontrôleurs (PIC, ATMEL, Arduino, ...) (MPLAB - AVR-GCC / AVR Dude) Développement sur processeurs ARM, Intel, MIPS, Power PC, ... Développement sur DSP Développement sur FPGA / VHDL Utilisation de cartes de développement ARM (Beagle Board, Fox Board, Panda Board, ...) Développement Linux e...

    Read the article

  • How do I get my character to move after adding to JFrame?

    - by A.K.
    So this is kind of a follow up on my other JPanel question that got resolved by playing around with the Layout... Now my MouseListener allows me to add a new Board(); object from its class, which is the actual game map and animator itself. But since my Board() takes Key Events from a Player Object inside the Board Class, I'm not sure if they are being started. Here's my Frame Class, where SideScroller S is the player object: package OurPackage; //Made By A.K. 5/24/12 //Contains Frame. import java.awt.BorderLayout; import java.awt.Button; import java.awt.CardLayout; import java.awt.Color; import java.awt.Container; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GridBagLayout; import java.awt.GridLayout; import java.awt.Image; import java.awt.Rectangle; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; import java.awt.event.MouseAdapter; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import javax.swing.*; import javax.swing.plaf.basic.BasicOptionPaneUI.ButtonActionListener; public class Frame implements MouseListener { public static boolean StartGame = false; JFrame frm = new JFrame("Action-Packed Jack"); ImageIcon img = new ImageIcon(getClass().getResource("/Images/ActionJackTitle.png")); ImageIcon StartImg = new ImageIcon(getClass().getResource("/Images/JackStart.png")); public Image Title; JLabel TitleL = new JLabel(img); public JPanel TitlePane = new JPanel(); public JPanel BoardPane = new JPanel(); JPanel cards; JButton StartB = new JButton(StartImg); Board nBoard = new Board(); static Sound nSound; public Frame() { frm.setLayout(new GridBagLayout()); cards = new JPanel(new CardLayout()); nSound = new Sound("/Sounds/BunchaJazz.wav"); TitleL.setPreferredSize(new Dimension(970, 420)); frm.add(TitleL); frm.add(cards); cards.setSize(new Dimension(150, 45)); cards.setLayout(new GridBagLayout ()); cards.add(StartB); StartB.addMouseListener(this); StartB.setPreferredSize(new Dimension(150, 45)); frm.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frm.setSize(1200, 420); frm.setVisible(true); frm.setResizable(false); frm.setLocationRelativeTo(null); frm.pack(); } public static void main(String[] args) { SwingUtilities.invokeLater(new Runnable() { public void run() { new Frame(); } }); } public void mouseClicked(MouseEvent e) { nSound.play(); StartB.setContentAreaFilled(false); cards.remove(StartB); frm.remove(TitleL); frm.remove(cards); frm.setLayout(new GridLayout(1, 1)); frm.add(nBoard); //Add Game "Tiles" Or Content. x = 1200 nBoard.setPreferredSize(new Dimension(1200, 420)); cards.revalidate(); frm.validate(); } @Override public void mouseEntered(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseExited(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mousePressed(MouseEvent arg0) { // TODO Auto-generated method stub } @Override public void mouseReleased(MouseEvent arg0) { // TODO Auto-generated method stub } }

    Read the article

  • iPhone - archiving array of custom objects

    - by Dylan
    I've been trying for hours and I cannot solve this problem. I'm making an app that saves unfinished Chess Games, so I'm trying to write an array to a file. This is what the array is, if it makes sense: -NSMutableArray savedGames --GameSave a ---NSMutableArray board; ----Piece a, b, c, etc. -----some ints ---NSString whitePlayer, blackPlayer; ---int playerOnTop, turn; --GameSave b ---NSMutableArray board; ----Piece a, b, c, etc. -----some ints ---NSString whitePlayer, blackPlayer; ---int playerOnTop, turn; etc. And these are my NSCoding methods: GameSave.m - (void)encodeWithCoder:(NSCoder *)coder { [coder encodeObject:whitePlayer forKey:@"whitePlayer"]; [coder encodeObject:blackPlayer forKey:@"blackPlayer"]; [coder encodeInt:playerOnTop forKey:@"playerOnTop"]; [coder encodeInt:turn forKey:@"turn"]; [coder encodeObject:board forKey:@"board"]; } - (id)initWithCoder:(NSCoder *)coder { self = [[GameSave alloc] init]; if (self != nil) { board = [coder decodeObjectForKey:@"board"]; whitePlayer = [coder decodeObjectForKey:@"whitePlayer"]; blackPlayer = [coder decodeObjectForKey:@"blackPlayer"]; playerOnTop = [coder decodeIntForKey:@"playerOnTop"]; turn = [coder decodeIntForKey:@"turn"]; } return self; } Piece.m - (void)encodeWithCoder:(NSCoder *)coder { [coder encodeInt:color forKey:@"color"]; [coder encodeInt:piece forKey:@"piece"]; [coder encodeInt:row forKey:@"row"]; [coder encodeInt:column forKey:@"column"]; } - (id)initWithCoder:(NSCoder *)coder { self = [[Piece alloc] init]; if (self != nil) { color = [coder decodeIntForKey:@"color"]; piece = [coder decodeIntForKey:@"piece"]; row = [coder decodeIntForKey:@"row"]; column = [coder decodeIntForKey:@"column"]; } return self; } And this is the code that tries to archive and save to file: - (void)saveGame { ChessSaverAppDelegate *delegate = (ChessSaverAppDelegate *) [[UIApplication sharedApplication] delegate]; [[delegate gameSave] setBoard:board]; NSMutableArray *savedGames = [NSKeyedUnarchiver unarchiveObjectWithFile:[self dataFilePath]]; if (savedGames == nil) { [NSKeyedArchiver archiveRootObject:[delegate gameSave] toFile:[self dataFilePath]]; } else { [savedGames addObject:[delegate gameSave]]; [NSKeyedArchiver archiveRootObject:savedGames toFile:[self dataFilePath]]; } } - (NSString *)dataFilePath { NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDirectory = [paths objectAtIndex:0]; return [documentsDirectory stringByAppendingPathComponent:@"gameSaves.plist"]; } Sorry, here's the problem: After setting some breakpoints, an error is reached after this line from -saveGame: [NSKeyedArchiver archiveRootObject:savedGames toFile:[self dataFilePath]]; And this is what shows up in the console: 2010-05-11 17:04:08.852 ChessSaver[62065:207] *** -[NSCFType encodeWithCoder:]: unrecognized selector sent to instance 0x3d3cd30 2010-05-11 17:04:08.891 ChessSaver[62065:207] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[NSCFType encodeWithCoder:]: unrecognized selector sent to instance 0x3d3cd30' 2010-05-11 17:04:08.908 ChessSaver[62065:207] Stack: ( 32339035, 31077641, 32720955, 32290422, 32143042, 238843, 25827, 238843, 564412, 342037, 238843, 606848, 17686, 2733061, 4646817, 2733061, 3140430, 3149167, 3144379, 2837983, 2746312, 2773089, 41684313, 32123776, 32119880, 41678357, 41678554, 2777007, 9884, 9738 ) If it matters, -saveGame is called from a UIBarButton in a navigation controller. Any help is appreciated, thanks.

    Read the article

  • UIKeyBoard resize on orientation change to landscape

    - by Dave
    This is very rookie question. I have a UIToolBar at the bottom which is supposed to animatedly move up and down with key board when the UIKeyBoard is displayed. I got that working with the help of UIKeyBoard Notifications. The view we are talking about has split view enabled. When device orientation is landscape, both the views as columns are shown [hope that makes sense]. When key board is shown, i do this CGSize keyBoardSize = [[notificationInfo objectForKey:UIKeyboardFrameEndUserInfoKey]CGRectValue].size; CGRect toolbarFrame= [BottomToolBar frame]; toolbarFrame.origin.y -= keyBoardSize.height; [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:0.3]; BottomToolBar .frame = viewFrame; [UIView commitAnimations]; when key board is hiiden i do this toolbarFrame.origin.y += keyBoardSize.height; My Problem is when device orientation changes to landscape, when the key board is visible the bottom tool bar is gone. I see it move up quickly. I am not sure how to fix this. Can anyone help please? Also, is there a way to NOT make the key board span across both the views in the split view?

    Read the article

  • Why doesn't WebBBS work now that I've migrated to a new server?

    - by Roy Peleg
    Hello, I've moved a WebBBS board from one server to another. Ever since the board doesn't work. I'm getting an Apache error whenever I try to access the board. Don't even know where to start the debugging, I'm not a Perl person. The file paths remained the same and there isn't any DB involved. http://gammonline.com/members/board/ Any ideas? After a bit of testing I believe that the problem has something to do with the index.cgi which is located in that folder (not getting the error when renaming it). Thanks, Roy.

    Read the article

  • Need to skip newline char (\n) from input file

    - by igor
    I am reading in a file into an array. It is reading each char, the problem arises in that it also reads a newline in the text file. This is a sudoku board, here is my code for reading in the char: bool loadBoard(Square board[BOARD_SIZE][BOARD_SIZE]) { ifstream ins; if(openFile(ins)){ char c; while(!ins.eof()){ for (int index1 = 0; index1 < BOARD_SIZE; index1++) for (int index2 = 0; index2 < BOARD_SIZE; index2++){ c=ins.get(); if(isdigit(c)){ board[index1][index2].number=(int)(c-'0'); board[index1][index2].permanent=true; } } } return true;} return false; } like i said, it reads the file, displays on screen, just not in correct order when it encounters the \n

    Read the article

  • objective C architecture question

    - by thekevinscott
    Hey folks, I'm currently teaching myself objective C. I've gone through the tutorials, but I find I learn best when slogging through a project of my own, so I've embarked on making a backgammon app. Now that I'm partway in, I'm realizing there's some overall architecture things I just don't understand. I've established a "player" class, a "piece" class, and a "board" class. A piece theoretically belongs to both a player and the board. For instance, a player has a color, and every turn makes a move; so the player owns his pieces. At the same time, when moving a piece, it has to check whether it's a valid move, whether there are pieces on the board, etc. From my reading it seems like it's frowned upon to reach across classes. For instance, when a player makes a move, where should the function live that moves the piece? Should it exist on board? This would be my instinct, as the board should decide whether a move is valid or not; but the piece needs to initialize that query, as its the one being moved, no? Any info to help a noob would be super appreciated. Thanks guys!

    Read the article

  • Passing pointer position to an object in Java.

    - by Gabriel A. Zorrilla
    I've got a JPanel class called Board with a static subclass, MouseHanlder, which tracks the mouse position along the appropriate listener in Board. My Board class has fields pointerX and pointerY. How do i pass the e.getX() and e.getY() from the MouseHandler subclass to its super class JPanel? I tried with getters, setters, super, and cant get the data transfer between subclass and parent class. I'm certain it's a concept issue, but im stuck. Thanks!

    Read the article

  • Looking for design/architecture suggestions for a simple HTML game.

    - by z-boss
    Imagine that HTML page is a game surface (see picture). User can have n number of boards (blue divs) on his page. Each board can be moved, re-sized, relabeled, created new and removed. Inside each board there are m number of figures (purple divs). Each of these user can move inside the board or to another board, re-size, change color and label, delete, add new. The goal of the game is not important, but let's say it is to rearrange figures in a certain way so that they disappear. But the goal of the programmer is to save the whole game surface in the database for every user of the site, and to load it later when he returns. So, how do I go about data exchange between client and the database? I'll give my idea in one of the answers.

    Read the article

  • Bejeweled Blitz - How does it assert there is always a move?

    - by EvilTeach
    I have been playing Bejeweled Blitz for a while now. Yes, it is an addiction. In thinking about the game, I have observed that on some boards, the bottom runs dry (no moves) leaving only the top part of the board playable. Frequently that part of the board drys up, and one is left with moves in area cleared by the last move. The board never runs completely dry, so clearly the program is doing some sorts of calculation that allows it to choose what to drop to prevent it from running dry. I have noticed in this 'mode' that it is very common for the algorithm to drop jewels which causes more non-dry area to appear in the horizontal area. Perhaps less frequent is a drop which seems designed to open up the bottom part of the board again. So my question is "How would one go about designing an algorithm guarantee that there is always a move available.?"

    Read the article

  • Python: does it make sense to refactor this check into it's own method?

    - by Jeff Fry
    I'm still learning python. I just wrote this method to determine if a player has won a game of tic-tac-toe yet, given a board state like:'[['o','x','x'],['x','o','-'],['x','o','o']]' def hasWon(board): players = ['x', 'o'] for player in players: for row in board: if row.count(player) == 3: return player top, mid, low = board for i in range(3): if [ top[i],mid[i],low[i] ].count(player) == 3: return player if [top[0],mid[1],low[2]].count(player) == 3: return player if [top[2],mid[1],low[0]].count(player) == 3: return player return None It occurred to me that I check lists of 3 chars several times and could refactor the checking to its own method like so: def check(list, player): if list.count(player) == 3: return player ...but then realized that all that really does is change lines like: if [ top[i],mid[i],low[i] ].count(player) == 3: return player to: if check( [top[i],mid[i],low[i]], player ): return player ...which frankly doesn't seem like much of an improvement. Do you see a better way to refactor this? Or in general a more Pythonic option? I'd love to hear it!

    Read the article

  • ISSUE IN CONNECTING PRO9000 CAMERA WITH OMAP3530 [closed]

    - by Vinay krishna
    I have a video phone application running on OMAP 3530 board.The problem is when i connect the camera(pro 9000) through a powered USB hub (Inp:100to240v, OUT:5v,1A) everything works fine when I make a video call.But If i connect the camera directly to the OMAP3530 board and try to make a video call,OMAP board is not sending any video packets captured locally.And also the PIP(Picture In Picture) is disabled.

    Read the article

  • Other test cases for this openFile function?

    - by igor
    I am trying to figure out why my function to open a file is failing this autograder I submit my homework into. What type of input would fail here, I can't think of anything else? Code: bool openFile(ifstream& ins) { char fileName[256]; cout << "Enter board filename: "; cin.getline(fileName,256); cout << endl << fileName << endl; ins.open(fileName); if(!ins) { ins.clear(); cout<<"Error opening file"<<endl; return false; } return true; } Here is output from the 'Autograder' of what my program's output is, and what the correct output is supposed to be (and I do not know what is in the file they use for the input) Autograder output: ******************************************* ***** ***** ***** Your output is: ***** ***** ***** ******************************************* Testing function openFile Enter board filename: test.txt 1 Enter board filename: not a fileName Error opening file 0 ******************************************* ***** ***** ***** Correct Output ***** ***** ***** ******************************************* Testing function openFile Enter board filename: 1 Enter board filename: Error opening file 0

    Read the article

  • Implementing a scrabble trainer

    - by bstullkid
    Hello, I've recently been playing alot of online scrabble so I decided to make a program that quickly searches through a dictionary of 200,000+ words with an input of up to any 26 letters. My first attempt was fail as it took a while when you input 8 or more letters (just a basic look through dictionary and cancel out a letter if its found kind of thing), so I made a tree like structure containing only an array of 26 of the same structure and a flag to indicate the end of a word, doing that It can output all possible words in under a second even with an input of 26 characters. But it seems that when I input 12 or more letters with some of the same characters repeated i get duplicates; can anyone see why I would be getting duplicates with this code? (ill post my program at the bottom) Also, the next step once the duplicates are weeded out is to actually be able to input the letters on the game board and then have it calculate the best word you can make on a given board. I am having trouble trying to figure out a good algorithm that can analyze a scrabble board and an input of letters and output a result; the possible words that could be made I have no problem with but actually checking a board efficiently (ie can this word fit here, or here etc... without creating a non dictionary word in the process on some other string of letters) Anyone have a idea for an approach at that? (given a scrabble board, and an input of 7 letters, find all possible valid words or word sets that you can make) lol crap i forgot to email myself the code from my other computer thats in another state... ill post it on monday when I get back there! btw the dictionary im using is sowpods (http://www.calvin.edu/~rpruim/scrabble/ospd3.txt)

    Read the article

  • Why are my USB 2.0 devices crashing Windows XP?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

    Read the article

  • Why are my USB 2.0 devices hanging Windows XP?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a generic ATX motherboard with no identifying markings other than one stamp that says "Rev.B". CPU-Z identifies the motherboard model as VT8601 but doesn't provide me with any manufacturer name. On board it has 1 x 10/100 LAN, 2 x USB 1.0, VGA, PS/2 for KB and mouse, parallel port, 2 x serial ports, 2 x IDE, 1 x floppy, 2 x SDRAM slots, 1 x CPU housing that is seating a 1.3GHz Intel Celeron CPU, 3 x PCI, 1 x AGP - although you can only use 2 of the PCI slots if you use the AGP slot due to the physical layout of the board. It's got 768Mb PC133 SDRAM - 1 x 512Mb & 1 x 256Mb installed as well as a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board containing 3 x external + 1 x internal USB connectors - it has a NEC uPD720102 chipset. It has a DVD+/-RW running as master on IDE1 and a 1.44Mb 3.5" floppy drive connected to the floppy connector. It has an 80Gb Western Digital hard drive running as master on IDE0. All this is sitting in a slimline case. I don't know the wattage of the PSU, but can post this later if this proves to be helpful. The motherboard is running a version of Award BIOS for which I don't have the version number to hand but can again post this later if it would be helpful. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine? Edit: Updated the USB 2.0 info with reference to actual card - http://www.xpcgear.com/lpnec4u.html

    Read the article

  • SQL ORDER BY thing1 ASC, thing2 DESC not working

    - by William
    it puts item1 down as DESC for some reason. edit: $sql_result = mysql_query("SELECT post, name, trip, Thread, sticky FROM (SELECT MIN(ID) AS min_id, MAX(ID) AS max_id, MAX(Date) AS max_date FROM test_posts GROUP BY Thread ) t_min_max INNER JOIN test_posts ON test_posts.ID = t_min_max.min_id WHERE Board=".$board." ORDER BY sticky ASC, max_date DESC", $db); http://prime.programming-designs.com/test_forum/viewboard.php?board=0&page=3

    Read the article

  • Moving 2d objects on a 3d plane - AS3

    - by Borkz
    I have a 2d plane rotated on its x axis, with 2d display objects I want to move around on the plane. Its pretty similar to a chess board: http://static.open.salon.com/files/chess011237853612.jpg The board is a rotated rectangle, and the pieces are just 2d display objects. Whats the easiest way to manipulate those objects so they appear to be moving on the board?

    Read the article

  • I'm an idiot/blind and I can't find why I'm getting a list index error. Care to take a look at these 20 or so lines?

    - by Meff
    Basically it's supposed to take a set of coordinates and return a list of coordinates of it's neighbors. However, when it hits here:if result[i][0] < 0 or result[i][0] >= board.dimensions: result.pop(i) when i is 2, it gives me an out of index error. I can manage to have it print result[2][0] but at the if statement it throws the errors. I have no clue how this is happening and if anyone could shed any light on this problem I'd be forever in debt. def neighborGen(row,col,board): """ returns lists of coords of neighbors, in order of up, down, left, right """ result = [] result.append([row-1 , col]) result.append([row+1 , col]) result.append([row , col-1]) result.append([row , col+1]) #prune off invalid neighbors (such as (0,-1), etc etc) for i in range(len(result)): if result[i][0] < 0 or result[i][0] >= board.dimensions: result.pop(i) if result[i][1] < 0 or result[i][1] >= board.dimensions: result.pop(i) return result

    Read the article

  • Implementing a scrabble trainer (cheater)

    - by bstullkid
    Hello, I've recently been playing alot of online scrabble so I decided to make a program that quickly searches through a dictionary of 200,000+ words with an input of up to any 26 letters. My first attempt was fail as it took a while when you input 8 or more letters (just a basic look through dictionary and cancel out a letter if its found kind of thing), so I made a tree like structure containing only an array of 26 of the same structure and a flag to indicate the end of a word, doing that It can output all possible words in under a second even with an input of 26 characters. But it seems that when I input 12 or more letters with some of the same characters repeated i get duplicates; can anyone see why I would be getting duplicates with this code? (ill post my program at the bottom) Also, the next step once the duplicates are weeded out is to actually be able to input the letters on the game board and then have it calculate the best word you can make on a given board. I am having trouble trying to figure out a good algorithm that can analyze a scrabble board and an input of letters and output a result; the possible words that could be made I have no problem with but actually checking a board efficiently (ie can this word fit here, or here etc... without creating a non dictionary word in the process on some other string of letters) Anyone have a idea for an approach at that? (given a scrabble board, and an input of 7 letters, find all possible valid words or word sets that you can make) lol crap i forgot to email myself the code from my other computer thats in another state... ill post it on monday when I get back there! btw the dictionary im using is sowpods (http://www.calvin.edu/~rpruim/scrabble/ospd3.txt)

    Read the article

  • Odd behaviour with scala method syntax

    - by Ceilingfish
    Hi chaps, I hit a bit of a quirk of scala's syntax I don't really understand object Board { def getObjectAt(x:Int, y:Int):Placeable = return locations(x)(y) } works fine. But object Board { def getObjectAt(x:Int, y:Int):Placeable { return locations(x)(y) } } returns the error Board.scala:8: error: illegal start of declaration return locations(x)(y) I found some stuff that says the second form convinces the scala compiler you're trying to specify an expansion to the return type Placeable. Is there a way I can fix this, or should I just avoid specifying a return type here?

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >