Search Results

Search found 17149 results on 686 pages for 'computer buying'.

Page 13/686 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • Computer SOMETIMES recognizes when headphones are plugged in.

    - by rcrobot
    Whenever I plug my headphones into my computer's front headphone jack, I get a weird situation. Sometimes, the computer will recognize the headphones and work properly. But other times, the computer will play sound through both the headphones and my monitor's speaker. When this happens, the sound section of the system settings does not list the headphones. I can fix the issue temporarily by wiggling the headphone port, but if it gets wiggled the wrong way again, then the issue returns. My PC's case is a Rosewill Challenger. I have tried multiple headphones and the same issue is there. I suspect that this might be a hardware related issue, but if there is any way to fix it with software, that would be helpful. This is what it looks like when everything is working properly: This happens when I wiggle the headphone port. I can quickly switch between these two by doing so:

    Read the article

  • Ubuntu 10.04, I cannot get my computer to connect to the internet

    - by Jared Isaacson
    So at first I was unable to get my Belkin Surf & Share usb to install on my computer, so then I plugged my computer directly into my router and my computer won't acknowledge any connection. I know very little about how to use ubuntu, please help me. What I do know is: I'm using Ubuntu 10.04 Lucid Lynx In my 'edit connections', I go into 'wired' tab, select "wired connection 1" then 'edit' it brings up 4 tab options: Wired (I input the MAC address that's printed on the bottom of my router, MTU is set to automatic) 802.1x Security (currently: not checked) IPv4 Settings (currently: Automatic (DHCP) addresses only) IPv6 Settings (currently: Automatic)

    Read the article

  • What You Said: How You Monitor Your Computer

    - by Jason Fitzpatrick
    Earlier this week we asked you to share your computer monitoring tips and tricks, now we’re back to share the wealth. Read on to see how your fellow reader monitor their gear. One of the more popular monitoring tools, thanks in part to the amount of things beyond just hardware it can monitor, in the comments was Rainmeter. Lee writes: I don’t really monitor my computer constantly, only when something is hanging up and I need to see what’s causing it. That being said, I do have Rainmeter so I can quickly see how much RAM or CPU is being used. For anything more detailed, I just go into the task manager and sort by RAM or CPU. Shinigamibob uses a wider range of tools to get a more in-depth look at difference aspects of his computer: 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

    Read the article

  • Installing Ubuntu 12.10 on new computer with Windows 8

    - by rft183
    I recently purchased a new HP computer (P6-2330) with Windows 8. I have tried unsuccessfully to install Ubuntu 12.10 64bit alongside Windows 8. The computer is UEFI with Secure Boot enabled. I've tried following the instruction at https://help.ubuntu.com/community/UEFI. I am able to get the GRUB menu to show up. However, as soon as I press Enter on either Try Ubuntu or Install Ubuntu, the screen goes blank. Nothing works at all, not even the Num Lock or Caps Lock keys on the keyboard. I have to use the power button to restart the computer. Does anyone have any suggestions on how to get Ubuntu installed? To clarify, I have actually tried installing using both a USB stick and a DVD. The USB stick gave a blank screen, while the DVD gave the error message "Empty Security Header" after pressing Enter at the GRUB screen.

    Read the article

  • Computer crashed during 3.0.0.17-generic kernel upgrade

    - by Z Swim
    My computer crashed (due to heat) during the update process for the 3.0.0.17-generic kernel upgrade. My computer will not boot ant all in 3.0.0.17 now and 3.0.0.16 is unstable (wireless networking doesn't work, also crashes often). I found the boot to previous versions tool at start up and the last stable version is 3.0.0.15-generic. However, my computer still thinks that it has 3.0.0.16-generic and 3.0.0.17-generic, even though both of these versions are broken. Is there anyway to force a reinstall of the 3.0.0.16-generic and 3.0.0.17-generic kernel updates from 3.0.0.15 and associated other updates?. (Without having to do a full reinstall?) I am running ubuntu 11.10. Thanks!

    Read the article

  • How Is My Computer Able to Restart Itself?

    - by Jason Fitzpatrick
    It’s such a common place activity that most of us have likely never stopped to even think about it: the automatic restart. Whether user or application-initiated, what exactly happens when your computer cycles its own power? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

    Read the article

  • How To Run Chrome OS From a USB Drive and Use It On Any Computer

    - by Chris Hoffman
    Google only supports running Chrome OS on Chromebooks, but don’t let that stop you. You can put Chrome OS on a USB drive and boot it on any computer, just as you’d run a Linux distribution from a USB drive. If you just want to test Chrome OS, your best bet is running it in a virtual machine. This ensures that you won’t run into any hardware-related issues. Your computer may not be able to run Chrome OS properly. Note: You’ll need a USB drive with at least 4 GB of space for this. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

    Read the article

  • Computer Science Career Advice: Master's in Computer Science vs. Software Engineering?

    - by Everton
    Hello, I am a college student and I am majoring in Computer Science and Applied Mathematics. As I get closer to my senior year I have noticed that continuing my studies is the best choice right for me now. I see that several universities offer an Computer Science Master's Degree and an Software Engineering degree. What are their pros and cons? I feel that while the Computer Science master's degree seems a little too broad the Software Engineering is too restrictive. I did not decide yet between an career of Software development or research ( algorithm development among other things ). Any advice would be greatly apreciated!

    Read the article

  • How to speak to a computer

    - by SalemSeven
    I am a self taught.. NEW..programmer. The language I chose was Objective-C so I can write for Apple products. I have learned the hard way that Objective-C has a steep learning curve but have forced myself to look at it over and over until I get it. I feel I am completing one major step and that is becoming very comfortable with the syntax and now as I enter the next big step...finding out what is possible with a computer language - I am thinking that all software is just developed within the confines of classes-loops-booleans-IF/OR statements-variables-etc. Is that a true assessment? When thinking of software in my head do I just need to learn to convert it all to arrays-loops/variables/classes - IF/OR statements - etc? Sorry if this question sounds funny but I am just learning how to take the language in my head and talk (what I think is) the language of a computer. Is there a good book or tutorial that helps illustrate how to speak computer speak?

    Read the article

  • Ubuntu dual boot OS crashed my computer. Now my computer won't boot. Please Help

    - by uBuntu noob
    I've just tried to install ubuntu 12.04 dual boot OS with Windows 7 and it finished installing in ubuntu. However, it said that the bootloader "grub.." failed to install. The same exact problem here I receive the error 'grub-install /dev/sda failed' while attempting to install Ubuntu as the computer's only OS. . When I tried to restart my computer, it went to the hp screen since my computer is a dv6 hp laptop and then it goes into this black screen with no words or any buttons will work. There is just a blinking underscore that seems like it'll allow me to type but makes error sounds when I type. Is this because I possibly partitioned my memory incorrectly? Any help would be greatly appreciated. I'm very desperate. ANY HELP would be great. Thanks.

    Read the article

  • Learning to program without a computer

    - by ribrdb
    I have a friend in prison who wants to learn to program. He's got no access to a computer so I was wondering if people could recommend books that would be a good introduction to programming without requiring a computer. Obviously he's going to need to keep learning once he gets out and has access to a computer, but how should he get started now (he's got lots of free time to read). Based on his goals I think ruby or javascript/html5 might be good paths for him to start down, but really for now it's most important to explain the ideas. Even if it's all pseudocode. These need to be physical publications, paperbacks are preferred, and consider that he's got limited shelf space so large books could be a problem.

    Read the article

  • 1. Rename computer 2. Add this computer

    - by user91583
    I've followed the instructions but they haven't worked. How do I -1. Rename this computer as it would appear in: -a Ubuntu One Preferences -- Devices; and [next line] -b https://one.ubuntu.com/account/ -- Devices -2. Your https://one.ubuntu.com/help/tutorial/install-and-setup-ubuntu-one-8/ says After you sign in to Ubuntu One via your web browser you should see the Add this Computer button. I am on the unfortunate side of that 'should'. There is no Add this Computer button.

    Read the article

  • Can the XP 'Computer Locked' dialog box be customized?

    - by sadmicrowave
    I'd like to customize the 'computer locked' dialog box in XP to be more graphic oriented, is there any way to do this, or perhaps just change the colors of the box? Also, I'm running dual monitors and would like the box to be positioned in the center of the two screens rather than in the center of Monitor 1 (main). Can this be done?

    Read the article

  • how would you like computer science classes to be taught?

    - by aaa
    hello I am a graduate student now, and hopefully someday I will teach. my interests are C++, Python, embedded languages, and scientific computing. Meanwhile I daydream about how I would teach. I was not quite happy with my undergraduate university as I found many computer science classes lacking. so I would like to ask you, if you were a student, how would you like your computer science classes to be taught? I understand it is a very subjective question, but nevertheless I think it's important to know what people want. Some specific points I am interested in: should computer languages be taught explicitly, or should students be required to pick up language on their own? what is better for learning, tests, projects, some sort of take-home exam? how do you think classtime should be used? theory, introduction, explanations, etc.? do you think the group projects are important? how much about computer architecture do you want to learn in computer science class, not necessarily assembler class. should particular operating system/editor be mandated or encouraged? Thanks thank you for your comments. Question has been closed because it is a discussion question rather than Q&A. If you know appropriate website for discussions of such sort with low noise ratio, please let me know.

    Read the article

  • My computer freezes irregularly

    - by Manhim
    My computer started to freeze at irregular times for 3 weeks now. Please note that this question change with each things that i try. (For additional details) What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. Sometimes my G-15 LCD screen flickers and caracters gets caried around temporary under heavy load. Now, most of the times, the BIOS hard disks boot order gets reversed for some reason and I have to put it to the right one and save each times I boot. (Might be unrelated, not sure, but it first started yesterday) Sometimes the BIOS doesn't detect my 750GB hard drive plugged in SATA1. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 45-55. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu Ran 6 short different CPU stress test on Fedora 15 (Haven't found any complete stress testers for Linux) and it didn't crash. Changed the thermal paste to some Artic Silver 5 for my CPU and stress tested the CPU, temperature was at 50 idle, then 64 highest and slowly went down to 62 during the test. Ran some stress testing with a temporary graphic card and it went ok. Ran furmark stress test with my original graphic card and it freezed again. GPU had a temp of 74C, a CPU temp of 58C and a mobo temp of 40C or 45C (Dunno which one it is from SpeedFan). Ran a furmark stress test and a CPU stress test at the same time, results: http://pastebin.com/2t6PLpdJ I have been using my computer without stressing it for about 2 hours now and no crashes yet. I also have disabled the AMD Cool'n'quiet function on the BIOS for a more regular power to the CPU. When I ran Furmark without C'n'q my computer didn't freeze but I had a "Driver Kernel Error" that have recovered (And Furmark crashed) all that while running a CPU stress test. The computer eventually frozed without me being at it, but this time my screen just went on sleep and I couldn't wake it. Using the stability tester in nTune my computer freezed again (In the same manner as before). I notived that Speedfan gives me a -12V of -16.97V and a -5V of -8.78V. I wonder if these numbers are reliable and if they are good or bad. I have swapped my G-15 with another basic USB keyboard (HP) and I have ran furmark for about 10 minutes with a CPU stability test running each 60 seconds for 30 seconds and my computer haven't crashed yet. Ran some more extended tests without my G-15 and it freezed like it usually do. Removed the nForce Hard disk controler. Disabled command queuing in the NVIDIA nForce SATA Controller for both port 0 and port 1 (Errors from the logs) Used CPUID HwMonitor, here are the voltages: http://pastebin.com/dfM7p4jV Changed some configurations in the motherboard BIOS: Disabled PEG Link Mode, Changed AI Tuning to Standard, Disabled the 1394 Controller, Disabled HD Audio, Disabled JMicron RAID controller and Disabled SATA Raid. When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) When my Graphic card and my CPU are stressed. Sometimes when my Graphic card is stressed. Never happenned while stressing only the CPU. Sometimes when my CPU is stressed. Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) Event logs (Warnings, errors and critical errors) for the last 24 hours: http://pastebin.com/Bvvk31T7 My current to-try list Reinstall the drivers and software 1 by 1 and do extensive stress testing between each. Update the BIOS firmware to the most recent stable one. Change my motherboard. Status updates Keeping only the last 3 (28/06 04pm) More stress testing and still pass the tests. (28/06 03pm) Been stress testing for 10 minute straight now and 5 minutes with both CPU and GPU being stressed at the same time. (28/06 03pm) Stress-testing right now, so far no problems. A little hope Tests with Furmark and Prime95. Testing Windows bare-bone: 30 Minutes stress, no freeze. Installing an Anti-virus and some software, restarting computer. Testing with Anti-virus and some software (No drivers installed): 30 Minutes stress, no freeze. Installing audio drivers, restarting computer. Testing with the audio drivers: 30 Minutes stress, no freeze. Installing the latest graphic drivers from EVGA's website (without 3d vision since I don't use it), restarting computer. Testing with the graphic drivers: 30 Minutes stress, no freeze. Configuring Windows to my liking and installing more softwares. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

    Read the article

  • How copy with shell commands(Linux) from 1 computer have (permanent url + open port) to 2 computer (secure way)?

    - by BenBen
    How copy with shell commands(Linux) from remote(my office computer) computer (permanent url + open port) to my (home) computer home/remote_computer_user/Desktop/test1.txt to my home computer home/home_computer_user/Downloads/ ? What I am doing: 1. ssh <user>@<computer1address> -p <port> :: success to get remote computer shell () 2. (I think I should use scp , but I dont how exactly in my case) Please if you can, write the exact commands that i should to from the shell Thanks in advance

    Read the article

  • Which part of the computer needs all the power from the PSU?

    - by Xeoncross
    A couple years ago I was building a new Core 2 Quad system and after reading all the reviews was convinced that I would need at least a 400 watt power supply unit (PSU). I bought a 500W Antec EarthWatts However, last year I bought a Kill-A-Watt power meter to test some things around our house and found that my PC was only using 80W of power while idle! (C2Q, 4GB RAM, SATA HD, & DVD burner) Well, here I am building another computer with a 65watt Core 2 CPU in it and I'm wondering if I can skimp out this time and get a 300watt or so unit since my usage doesn't seem to be what everyone claims it is. I'm sure that the people in the reviews who exhausted 500watt PSU weren't lying - so what is it that uses all that? The high-end dual SLI video cards? Lots of SATA drives? Overclocking?

    Read the article

  • How do I know which hardware components are compatible when building a computer?

    - by darkie15
    I am trying to setup my own new computer. I haven't done this before and hence needed guidance from all here. I can google out the results for steps to follow for setting up my machine, but I do not understand what components are compatible with each other? For example there must be specific models of motherboard that are compatible with Intel Core i5-2500K Sandy Bridge 3.3GHz. In general, if there is a website that can guide me on all compatible components, that would be great. If not, how would I be able to check compatibility?

    Read the article

  • Building computer: Casing for peripheral sockets is a pain!

    - by burnt1ce
    I have a casing the covers the spacing between the peripheral socket which is standard to have when you buy a motherboard. My problem with these covers is that they have spokes that pushes the motherboard away so the sockets don't even come out of the covers. This also misaligns the screws on my atx motherboard with the holes in my computer case. I usually break these spokes so that i can align my motherboard correctly. Why the heck do motherboard manufacture put spokes on these covers? am i using them wrong? UPDATE Here's an image that i found that shows the plastic casing. http://z.about.com/d/pcsupport/1/5/m/-/-/-/tour%5Fexternal.jpg You can even see the indentation that makes the spokes that pushes the motherboard inwards.

    Read the article

  • How to remove the smell of cigarette from the computer?

    - by Tio
    So I'm a smoker, and of course I smoke in front of the computer when I'm at home. On last Friday I moved out from my mothers house to my own, and since the computers were always turned on and the room was a room that everybody could smoke, the smell didn't bother me. At my new home, I turned them on, about 15 minutes ago, and I'm dying because of the smell of cigarette ( this may be kind of stupid from a smoker, but I hope some of you understand ). This solution has to be relatively quick, because I can't stay without the desktop and the server for one week, for example. Tomorrow, I'm going to open them both, and remove all dust there is inside, this should clear some of the smell, but probably won't remove it completely. Does anyone know a technique to get rid of the smell?

    Read the article

  • Make Your 64 bit Computer Look like a Commodore 64

    - by Matthew Guay
    The Commodore 64 was one of the bestselling home computers ever, and many geeks got their first computing experience on one of these early personal computers. Here’s an easy way to revisit the early years of personal computing with a theme for Windows 7. With only 64Kb of ram and an 8 bit processor, the Commodore 64 is light-years behind today’s computers.  But with a Windows 7 themepack, you can turn back the years and give your computer a quick overhaul to look more like its ancient predecessor. Age Windows 7 with a click Download the Commodore 64 theme from PC World (link below), and unzip the files. Now, double-click on the Themepack file to apply the theme. This will open your Personalization panel and will automatically change your system fonts, window style, background, and more. Your desktop will go from your Windows 7 look… to a modified Windows 7 look that is reminiscent of the Commodore 64. Open an application to see all the changes … notice the old-style font in the Window boarder and menus. This theme also changes your Computer, Recycle Bin, and User folder icons to Commodore 64-inspired icons. And, if you want to go back to the standard Windows 7 look and feel, it’s only a click away in the Personalization dialog.  Right-click on your desktop, select Personalize, and then choose the theme you want.   Conclusion Although this doesn’t give you the real look and feel of the Commodore 64, it is still a fun way to experience a bit of computer nostalgia.  There are tons of excellent themes available for Windows 7, so check back for more exciting ways to customize your desktop! Link Download the Commodore 64 theme for Windows 7 Similar Articles Productive Geek Tips Make MSE Create a Restore Point Before Cleaning MalwareMake Ubuntu Automatically Save Changes to Your SessionMake Windows Vista Shut Down Services QuickerChange Your Computer Name in Windows 7 or VistaMake Windows 7 or Vista Log On Automatically TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Dark Side of the Moon (8-bit) Norwegian Life If Web Browsers Were Modes of Transportation Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports

    Read the article

  • Mathematics for Computer Science

    - by jiewmeng
    I am going into university next year. I think maths would be one of the more important aspects of computer science? I recently saw the MIT Intro to Algorithms video on YouTube and the maths required is quite hardcore. I wonder what parts of maths do i need, probability, calculus, trigo etc. Will the book Concrete Mathematics - it claims to be foundation for computer science - on Amazon cover most of whats required?

    Read the article

  • Computer Visionaries 2014 Kinect Hackathon

    - by T
    Originally posted on: http://geekswithblogs.net/tburger/archive/2014/08/08/computer-visionaries-2014-kinect-hackathon.aspxA big thank you to Computer Vision Dallas and Microsoft for putting together the Computer Visionaries 2014 Kinect Hackathon that took place July 18th and 19th 2014.  Our team had a great time and learned a lot from the Kinect MVP's and Microsoft team.  The Dallas Entrepreneur Center was a fantastic venue. In total, 114 people showed up to form 15 teams. Burger ITS & Friends team members with Ben Lower:  Shawn Weisfeld, Teresa Burger, Robert Burger, Harold Pulcher, Taylor Woolley, Cori Drew (not pictured), and Katlyn Drew (not pictured) We arrived Friday after a long day of work/driving.  Originally, our idea was to make a learning game for kids.  It was intended to be multi-simultaneous players dragging and dropping tiles into a canvas area for kids around 5 years old. We quickly learned that we were limited to two simultaneous players. After working on the game for the rest of the evening and into the next morning we decided that a fast multi-player game with hand gestures was not going to happen without going beyond what was provided with the API. If we were going to have something to show, it was time to switch gears. The next idea on the table was the Photo Anywhere Kiosk. The user can use voice and hand gestures to pick a place they would like to be.  After the user says a place (or anything they want) and then the word "search", the app uses Bing to display a bunch of images for him/her to choose from. With the use of hand gesture (grab and slide to move back and forth and push/pull to select an image) the user can get the perfect image to pose with. I couldn't get a snippet with the hand but when a the app is in use, a hand shows up to cue the user to use their hand to control it's movement. Once they chose an image, we use the Kinect background removal feature to super impose the user on that image. When they are in the perfect position, they say "save" to save the image. Currently, the image is saved in the images folder on the users account but there are many possibilities such as emailing it, posting to social media, etc.. The competition was great and we were honored to be recognized for third place. Other related posts: http://jasongfox.com/computer-visionaries-2014-incredible-success/ A couple of us are continuing to work on the kid's game and are going to make it a Windows 8 multi-player game without Kinect functionality. Stay tuned for more updates.

    Read the article

  • Computer / Software Engineering vs Other Engineering Disciplines [closed]

    - by Mohammad Yaseen
    Since this was a rather specific question, I have tried my best to present this question in a format which fits the style of this site. Please comment if it can be improved further. I have to choose the Engineering discipline on 6th Nov. My interest is in Robotics, hardware-level programming, Artificial Intelligence and back-end programming. I am currently working as a freelance developer using mainly PHP and occasionally working with GWT.I am somewhat familiar with C# and Python too. I am not super good at programming but I do like it. I am thinking to choose Computer and Information Systems Engineering as this is what I love but all the eggheads of my city are going to Mechanical Engineering and when I ask one of them Why are you choosing this? They say It's my interest and for job and the money. Basically I am confused between CIS and Mechanical Engineering, specifically the job market for both. Since this is a programmers' site I think following questions will be relevant . I am asking this because I want to take advice from professionals in this field before diving too deep . Are you happy with your job / work and pay. Are you satisfied with the work environment and career growth Do you feel OK (or great?) about the near and/or distant future of your industry. Why should a person choose Computer if he has other choices i.e what this industry has to offer in particular which other fields of work don't This industry is subject to rapid changes and you have to learn continuously throughout your entire career. Does this learning and constant hard work pay off ? In my country there is no hardware manufacturing. So most of CIS graduates (like Software Engineers) work in Software Houses. What is the scenario in your country. Is a degree titled 'Software' necessary or companies will take Computer Engineers too if they have relevant experience. I am asking this because I plan to move abroad for work. This is going to be something which I'll do for the rest of my life so I am a bit confused about the right choice. You can view the course outline for both programmes below. Computer and Information Systems Engineering. Mechanical Engineering

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >