Search Results

Search found 5542 results on 222 pages for 'cross compiling'.

Page 13/222 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • Why won't xattr PECL extension build on 12.10?

    - by Dan Jones
    I was using the xattr pecl extension in 12.04 (in fact, I think since 10.04) without problem. Not surprisingly, I had to reinstall it after upgrading to 12.10 because of the new version of PHP. But now it fails to build, and I can't figure out why. Other PECL extensions have built fine. And I have libattr1 and libattr1-dev installed. Here's the output from the build: downloading xattr-1.1.0.tgz ... Starting to download xattr-1.1.0.tgz (5,204 bytes) .....done: 5,204 bytes 3 source files, building running: phpize Configuring for: PHP Api Version: 20100412 Zend Module Api No: 20100525 Zend Extension Api No: 220100525 libattr library installation dir? [autodetect] : building in /tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0 running: /tmp/pear/temp/xattr/configure --with-xattr checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ISO C89... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib checking for PHP extension directory... /usr/lib/php5/20100525 checking for PHP installed headers prefix... /usr/include/php5 checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... 0.13.5 (ok) checking for gawk... gawk checking for xattr support... yes, shared checking for xattr files in default path... found in /usr checking for attr_get in -lattr... yes checking how to print strings... printf checking for a sed that does not truncate output... (cached) /bin/sed checking for fgrep... /bin/grep -F checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking whether the shell understands some XSI constructs... yes checking whether the shell understands "+="... yes checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking for gawk... (cached) gawk checking command to parse /usr/bin/nm -B output from cc object... ok checking for sysroot... no checking for mt... mt checking if mt is a manifest tool... no checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC -DPIC checking if cc PIC flag -fPIC -DPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking if cc supports -c -o file.o... (cached) yes checking whether the cc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating ./config.status config.status: creating config.h config.status: executing libtool commands running: make /bin/bash /tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0/libtool --mode=compile cc -I. -I/tmp/pear/temp/xattr -DPHP_ATOM_INC -I/tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0/include -I/tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0/main -I/tmp/pear/temp/xattr -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /tmp/pear/temp/xattr/xattr.c -o xattr.lo libtool: compile: cc -I. -I/tmp/pear/temp/xattr -DPHP_ATOM_INC -I/tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0/include -I/tmp/pear/temp/pear-build-rootdSMx0G/xattr-1.1.0/main -I/tmp/pear/temp/xattr -I/usr/include/php5 -I/usr/include/php5/main -I/usr/include/php5/TSRM -I/usr/include/php5/Zend -I/usr/include/php5/ext -I/usr/include/php5/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /tmp/pear/temp/xattr/xattr.c -fPIC -DPIC -o .libs/xattr.o /tmp/pear/temp/xattr/xattr.c:50:1: error: unknown type name 'function_entry' /tmp/pear/temp/xattr/xattr.c:51:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: error: initializer element is not computable at load time /tmp/pear/temp/xattr/xattr.c:51:2: error: (near initialization for 'xattr_functions[0]') /tmp/pear/temp/xattr/xattr.c:51:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:51:2: warning: (near initialization for 'xattr_functions[0]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: error: initializer element is not computable at load time /tmp/pear/temp/xattr/xattr.c:52:2: error: (near initialization for 'xattr_functions[1]') /tmp/pear/temp/xattr/xattr.c:52:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:52:2: warning: (near initialization for 'xattr_functions[1]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: error: initializer element is not computable at load time /tmp/pear/temp/xattr/xattr.c:53:2: error: (near initialization for 'xattr_functions[2]') /tmp/pear/temp/xattr/xattr.c:53:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:53:2: warning: (near initialization for 'xattr_functions[2]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: error: initializer element is not computable at load time /tmp/pear/temp/xattr/xattr.c:54:2: error: (near initialization for 'xattr_functions[3]') /tmp/pear/temp/xattr/xattr.c:54:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:54:2: warning: (near initialization for 'xattr_functions[3]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: error: initializer element is not computable at load time /tmp/pear/temp/xattr/xattr.c:55:2: error: (near initialization for 'xattr_functions[4]') /tmp/pear/temp/xattr/xattr.c:55:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:55:2: warning: (near initialization for 'xattr_functions[4]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: braces around scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: (near initialization for 'xattr_functions[5]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: initialization makes integer from pointer without a cast [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: (near initialization for 'xattr_functions[5]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: (near initialization for 'xattr_functions[5]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: excess elements in scalar initializer [enabled by default] /tmp/pear/temp/xattr/xattr.c:56:2: warning: (near initialization for 'xattr_functions[5]') [enabled by default] /tmp/pear/temp/xattr/xattr.c:67:2: warning: initialization from incompatible pointer type [enabled by default] /tmp/pear/temp/xattr/xattr.c:67:2: warning: (near initialization for 'xattr_module_entry.functions') [enabled by default] /tmp/pear/temp/xattr/xattr.c: In function 'zif_xattr_set': /tmp/pear/temp/xattr/xattr.c:122:49: error: 'struct _php_core_globals' has no member named 'safe_mode' /tmp/pear/temp/xattr/xattr.c:122:92: error: 'CHECKUID_DISALLOW_FILE_NOT_EXISTS' undeclared (first use in this function) /tmp/pear/temp/xattr/xattr.c:122:92: note: each undeclared identifier is reported only once for each function it appears in /tmp/pear/temp/xattr/xattr.c: In function 'zif_xattr_get': /tmp/pear/temp/xattr/xattr.c:171:49: error: 'struct _php_core_globals' has no member named 'safe_mode' /tmp/pear/temp/xattr/xattr.c:171:92: error: 'CHECKUID_DISALLOW_FILE_NOT_EXISTS' undeclared (first use in this function) /tmp/pear/temp/xattr/xattr.c:187:2: warning: passing argument 4 of 'attr_get' from incompatible pointer type [enabled by default] In file included from /tmp/pear/temp/xattr/xattr.c:37:0: /usr/include/attr/attributes.h:122:12: note: expected 'int *' but argument is of type 'size_t *' /tmp/pear/temp/xattr/xattr.c:198:3: warning: passing argument 4 of 'attr_get' from incompatible pointer type [enabled by default] In file included from /tmp/pear/temp/xattr/xattr.c:37:0: /usr/include/attr/attributes.h:122:12: note: expected 'int *' but argument is of type 'size_t *' /tmp/pear/temp/xattr/xattr.c: In function 'zif_xattr_supported': /tmp/pear/temp/xattr/xattr.c:243:49: error: 'struct _php_core_globals' has no member named 'safe_mode' /tmp/pear/temp/xattr/xattr.c:243:92: error: 'CHECKUID_DISALLOW_FILE_NOT_EXISTS' undeclared (first use in this function) /tmp/pear/temp/xattr/xattr.c: In function 'zif_xattr_remove': /tmp/pear/temp/xattr/xattr.c:288:49: error: 'struct _php_core_globals' has no member named 'safe_mode' /tmp/pear/temp/xattr/xattr.c:288:92: error: 'CHECKUID_DISALLOW_FILE_NOT_EXISTS' undeclared (first use in this function) /tmp/pear/temp/xattr/xattr.c: In function 'zif_xattr_list': /tmp/pear/temp/xattr/xattr.c:337:49: error: 'struct _php_core_globals' has no member named 'safe_mode' /tmp/pear/temp/xattr/xattr.c:337:92: error: 'CHECKUID_DISALLOW_FILE_NOT_EXISTS' undeclared (first use in this function) make: *** [xattr.lo] Error 1 ERROR: `make' failed There seem to be a few errors, but I can't make heads or tails of them. Does this just not work properly in 12.10? That would be a big problem for me.

    Read the article

  • Source cross reference like LXR but written in PHP?

    - by Dan
    Hi, does someone know a good cross reference engine like LXR, but written in PHP? My provider has PHP and MySQL as well as Postgres DBs, but neither I have access to Perl nor via SSH. I'd like to put up a online cross ref for my Software which is written in C. Thanks for helping! Dan

    Read the article

  • Error when compiling FXAA shader

    - by mulletdevil
    I am getting the following error when compiling the FXAA shader downloaded from here http://timothylottes.blogspot.co.uk/2011/07/fxaa-311-released.html Fxaa3_11.h(934,5): error x4000: Use of potentially uninitialized variable (FxaaPixelShader) Here is the line in the shader if(earlyExit) #if (FXAA_DISCARD == 1) FxaaDiscard; #else return rgbyM; #endif Does anyone know what may be causing this? I have not changed any values in that shader. Here is a snippet from my current pixel shader #define FXAA_GREEN_AS_LUMA 1 #define FXAA_HLSL_4 1 #define FXAA_PC 1 #define FXAA_QUALITY__PRESET 12 #include "Fxaa3_11.h" PS_OUTPUT main(PS_INPUT fragment) { PS_OUTPUT output; const float2 pos = fragment.hPosition.xy; const float4 notUsedFloat4 = float4(0.0f, 0.0f, 0.0f, 0.0f); const float fxaaQualitySubpix = 0; const float fxaaQualityEdgeThreshold = 0.333; const float fxaaQualityEdgeThresholdMin = 0.0833; const float notUsedFloat = 0.0f; FxaaTex fxaaTex; fxaaTex.smpl = SampleType; fxaaTex.tex = inputTexture; output.colour = FxaaPixelShader(pos, //1 notUsedFloat4, //2 fxaaTex, //3 fxaaTex, //4 fxaaTex, //5 rcpFrame, //6 notUsedFloat4, //7 rcpFrameOpt, //8 notUsedFloat4, //9 fxaaQualitySubpix, //10 fxaaQualityEdgeThreshold, //11 fxaaQualityEdgeThresholdMin, //12 notUsedFloat, //13 notUsedFloat, //14 notUsedFloat, //15 notUsedFloat //16 ); return output; } Am I passing a wrong value into the shader?

    Read the article

  • Extended Blogs – Now cross posting to Sqlblog.com

    - by extended_events
    Thanks to some help from SQL MVP Adam Mechanic, the Extended Events blog is now being cross posted on SQLblog.com. Except for the first two posts (welcome message & Reading event data 101), these blogs will be identical so read whichever site you prefer, either the SQLblog version, or the original MSDN blog. - Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Mobile: Wrox Cross Platform Mobile Development - iPhone, iPad, Android, and everything with .NET & C#

    - by Wallym
    Wrox has produced a bundle of their 3 best selling mobile development books and it is available as of Today (March 16). A bundle of 3 best-selling and respected mobile development e-books from Wrox form a complete library on the key tools and techniques for developing apps across the hottest platforms including Android and iOS. This collection includes the full content of these three books, at a special price: Professional Android Programming with Mono for Android and .NET/C#, ISBN: 9781118026434, by Wallace B. McClure, Nathan Blevins, John J. Croft, IV, Jonathan Dick, and Chris Hardy Professional iPhone Programming with MonoTouch and .NET/C#, ISBN: 9780470637821, by Wallace B. McClure, Rory Blyth, Craig Dunn, Chris Hardy, and Martin Bowling Professional Cross-Platform Mobile Development in C#, ISBN: 9781118157701, by Scott Olson, John Hunter, Ben Horgen, and Kenny Goers Remember, go buy 8-10 copies of the 3 book set for the ones you love. They will make great and romantic gifts!!

    Read the article

  • Checking for cross-site scripting vulnerabilities in Perl web applications

    - by David Scholefield
    I'm putting together some notes for a dev team on how to write secure Perl code - especially taking into account the current OWASP top 10 web application vulnerabilities. For cross-site scripting I've included information on ensuring that all output to the browser is checked and escaped where necessary, but I'm looking for more automated mechanisms that would mean a developer doesn't have to think about every output statement and, potentially, miss one. Perl's 'taint' function sounds like it should be a help because it distrusts all user input, but it doesn't complain on tainted data being output to the browser. Apart from checking all output statements individually (probably by calling a generic sanitizing function) does anyone have any ideas on how Perl can help with this with existing libraries or techniques?

    Read the article

  • Problems compiling with Quickly

    - by espectalll123
    Welcome to another of my questions about compiling! :P So, after days of stress trying to compile my app, first manually, after porting the project to Quickly, I decided to create the project from scratch using this time Quickly. Now I've finished the app, it works great using quickly run and I haven't added any new file, just removed, replaced or modified. But it can't be compiled using quickly package --verbose --extras... why, if there doesn't seems to be errors related with my project? The fail happens because python-mkdebian doesn't haves enough parameters to work. The terminal output (in Spanish): running install_egg_info Writing /tmp/tmpsT6Pms/virtuam-0.1.egg-info WARNING: the following files are not recognized by DistUtilsExtra.auto: help/C/figures/icon.png help/C/index.page help/C/preferences.page help/C/topic1.page virtuam.desktop.in Traceback (most recent call last): File "/usr/bin/python-mkdebian", line 368, in <module> egg = get_egg_info() File "/usr/bin/python-mkdebian", line 35, in get_egg_info k, v = l.strip().split(': ', 1) ValueError: need more than 1 value to unpack Ha ocurrido un error al crear el paquete Debian ERROR: no se puede crear o actualizar paquete ubuntu Error: la orden package ha fallado Cancelando

    Read the article

  • Compiling C++ code with mingw under 12.04

    - by golemit
    I tried to setting up compiling of the C++ projects under my Ubuntu 12.04 by mingw with QT libraries. The idea was to get executable independent from variations of target Windows versions and development environments of my colleagues. It was successfully implemented under OpenSuse 12.2 with mingw32 and some additional libraries including mingw32-libqt4 and some others. Fine. However when trying to do the same under Ubuntu 12.04 with mingw-w64 including latest libraries QT-4.8.3 copied from Windows there were always errors. No luck. The typical errors in these attempts can be seen in attachments. The commands used: qmake -spec /path_to_my_conf/win32-x-g++ my_project.pro make Can someone give a hint of the problem source? I would appreciate a good advice. Serge some exctracts from LOG: ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0xec): undefined reference to `QDialog::accept()' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0xf0): undefined reference to `QDialog::reject()' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x104): undefined reference to `non-virtual thunk to QWidget::devType() const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x108): undefined reference to `non-virtual thunk to QWidget::paintEngine() const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x10c): undefined reference to `non-virtual thunk to QWidget::getDC() const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x110): undefined reference to `non-virtual thunk to QWidget::releaseDC(HDC__*) const' ./.obj/moc_xlseditor.o:moc_xlseditor.cpp:(.rdata$_ZTV10GXlsEditor[vtable for GXlsEditor]+0x114): undefined reference to `non-virtual thunk to QWidget::metric(QPaintDevice::PaintDeviceMetric) const' ./.obj/qrc_images.o:qrc_images.cpp:(.text+0x24): undefined reference to `__imp___Z21qRegisterResourceDataiPKhS0_S0_' ./.obj/qrc_images.o:qrc_images.cpp:(.text+0x64): undefined reference to `__imp___Z23qUnregisterResourceDataiPKhS0_S0_' collect2: ld returned 1 exit status

    Read the article

  • MAKE CROSS THREAD METHOD CALLS USING INVOKE METHOD OF THE CONTROL

    Cross threading is a phenomina normally happening in any of application debug session. Developer may not able to understand what's this all about. He may not actually coded for any such scenario like Threading. But this exception may raise especially in side a method where you are accessing any of the GUI control menthod. One natural scenaio will happen, once you are handling with FielSystemWatcher class. But here 1st I will create a sceanrio and then will give you 2 way resolution too.

    Read the article

  • Webinar Recording on Cross Platform Development with MonoTouch and Mono for Android

    - by Wallym
    The iPhone and Android are dominant in the marketplace. The two platforms currently have 85% of the smartphone marketplace and are continuing to grow that marketshare. Developers are being tasked with targeting these two platforms. In this session, we’ll take a high level look at how we can use c# and .NET knowledge to share code between iOS and and Android. We’ll look at linked files, using the Xamarin Mobile API, the challenges of running across platforms and frameworks, as well as other features of Visual Studio, Monotouch, MonoDevelop, and Mono for Android that allows us to write as much code that can run on both platforms.The following link is a recording on Cross Platform Development with MonoTouch and Mono for Android. I am guessing that the link only works in IE. That's out of my control.

    Read the article

  • G++ Compiling errors

    - by egn56
    Attempting to do some compiling with g++ and when I run g++ test.cpp this is what I get. I am in the correct directory and I have even messed with the permission settings to make those directories chmod 777 as a test, still nothing. Tried running it as sudo g++ test.cpp and getting nothing. It can compile and create a .o if i run g++ -c test.cpp but it can't seem to link it and create the .out. Any suggestions? /usr/bin/ld: 1: /usr/bin/ld: /bin: Permission denied /usr/bin/ld: 2: /usr/bin/ld: test.cpp: not found /usr/bin/ld: 3: /usr/bin/ld: test.cpp: not found /usr/bin/ld: 4: /usr/bin/ld: test.cpp: not found /usr/bin/ld: 5: /usr/bin/ld: test.cpp: not found /usr/bin/ld: 6: /usr/bin/ld: test.cpp: not found /usr/bin/ld: 7: /usr/bin/ld: test.cpp: not found /usr/bin/ld: 8: /usr/bin/ld: test.cpp: not found /usr/bin/ld: 9: /usr/bin/ld: test.cpp: not found /usr/bin/ld: 10: /usr/bin/ld: test.cpp: not found /usr/bin/ld: 11: /usr/bin/ld: test.cpp: not found /usr/bin/ld: 12: /usr/bin/ld: Syntax error: "(" unexpected collect2: ld returned 2 exit status

    Read the article

  • Templates and Cross-domain client-side binding with RadGrid for ASP.NET AJAX

    Or yet another Twitter grid Yesterday, while I was playing around with this example of our MVC Grid, I thought that the RadGrid for ASP.NET AJAX deserves one too. What I like about this sample scenario is that it gives a perfect opportunity to demonstrate both how to do client cross-site request (as we have received a few questions through our support channels) and to check the future ASP.NET AJAX/jQuery client-side templates prototype.     A wiser guy once said a code sample is worth more than a 1000 words ;) That is why Ill keep it short and let you check the sample project.   Enjoy.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Can't boot after compiling 3.1 kernel, can only get to terminal

    - by olssy
    Long story short: I tried compiling kernel 3.1 on Ubuntu 11.10 at the same time I had an update waiting for a reboot. Computer would boot to a black screen and would hang there. Ended up installing 11.10 on top of old install with a Live CD. Now I had a purple screen on bootup but it would end up booting. Realized Grub was the problem and tried some stuff but nothing worked. I ended up trying to install propriety ATI video drivers and since that nothing has worked, no grub menu(purple screen) and when it boots into the kernel it ends up hanging, I can sometimes get a terminal up with alt-fx. I have tried removing the ati drivers with the ati script, purging my fglrx driver, reconfiguring my xconf.org and following any tutorial I can find about fixing a broken graphics driver, but to no avail. I've gotten to a point were it seems that the ati propriety drivers are correctly loaded but it still has no grub boot menu and won't boot into Ubuntu. I've chased down my logs and this line is from kern.log: unity-greeter[3269]: segfault at 0 ip b7245cbbsp bf9d3900 error 4 in libgio-2.0.so.0.3000.0[b71ad000+142000] That line leads me to believe I don'T have the correct libgio-2 librairy on my system but have no idea how to find out what package has the correct version... My xorg.conf has no errors and seems to imply the fglrxdrm module got loaded correctly. Would be a bit complicated pasting the whole file here but if it would help I'll post it. LAstly, running fglrxinfo give me: Error: Unable yo open display (null) Any help or link to another tutorial would be appreciated. Thanks.

    Read the article

  • Cross-platform & 3D mobile game development [on hold]

    - by Sylvia MBemba
    I am not a developer or programmer and, I am planning an educative project that will involve having students to develop a cross-platform, 3D mobile game, similar to the SimCity concept. I need to write a project requirement and I'd like to pick someone's brain to understand what's involved in developing such a project: Is it realistic to have one or two students to do it? and along their other modules at uni? How much time can it take to develop from scratch? what are the different skills required?

    Read the article

  • Cross-reference of computers having virtualization technology [closed]

    - by msorens
    When considering obtaining a new computer one of my prerequisites is the ability to load Windows 8 in a virtual machine (using VirtualBox). A prerequisite for that is that the host computer have virtualization technology. I located an Intel cross reference of chips having virtualization technology but I am trying to find a "higher level" cross reference between computer models and virtualization technology availability, skipping the extra step of having to first look up what CPU chip is in a machine, then cross-referencing that on Intel's list.

    Read the article

  • Security Trimmed Cross Site Collection Navigation

    - by Sahil Malik
    Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). This article will serve as documentation of a fully functional codeplex project that I just created. This project will give you a WebPart that will give you security trimmed navigation across site collections. The first question is, why create such a project? In every single SharePoint project you will do, one question you will always be faced with is, what should the boundaries of sites be, and what should the boundaries of site collections be? There is no good or bad answer to this, because it really really depends on your needs. There are some factors in play here. Site Collections will allow you to scale, as a Site collection is the smallest entity you can put inside a content database Site collections will allow you to offer different levels of SLAs, because you put a site collection on a separate content database, and put that database on a separate server. Site collections are a security boundary – and they can be moved around at will without affecting other site collections. Site collections are also a branding boundary. They are also a feature deployment boundary, so you can have two site collections on the same web application with completely different nature of services. But site collections break navigation, i.e. a site collection at “/”, and a site collection at “/sites/mySiteCollection”, are completely independent of each other. If you have access to both, the navigation of / won’t show you a link to /sites/mySiteCollection. Some people refer to this as a huge issue in SharePoint. Luckily, some workarounds exist. A long time ago, I had blogged about “Implementing Consistent Navigation across Site Collections”. That approach was a no-code solution, it worked – it gave you a consistent navigation across site collections. But, it didn’t work in a security trimmed fashion! i.e., if I don’t have access to Site Collection ‘X’, it would still show me a link to ‘X’. Well this project gets around that issue. Simply deploy this project, and it’ll give you a WebPart. You can use that WebPart as either a webpart or as a server control dropped via SharePoint designer, and it will give you Security Trimmed Cross Site Collection Navigation. The code has been written for SP2010, but it will work in SP2007 with the help of http://spwcfsupport.codeplex.com . What do I need to do to make it work? I’m glad you asked! Simple! Deploy the .wsp (which you can download here). This will give you a site collection feature called “Winsmarts Cross Site Collection Navigation” as shown below. Go ahead and activate it, and this will give you a WebPart called “Winsmarts Navigation Web Part” as shown below: Just drop this WebPart on your page, and it will show you all site collections that the currently logged in user has access to. Really it’s that easy! This is shown as below - In the above example, I have two site collections that I created at /sites/SiteCollection1 and /sites/SiteCollection2. The navigation shows the titles. You see some extraneous crap as well, you might want to clean that – I’ll talk about that in a minute. What? You’re running into problems? If the problem you’re running into is that you are prompted to login three times, and then it shows a blank webpart that says “Loading your applications ..” and then craps out!, then most probably you’re using a different authentication scheme. Behind the scenes I use a custom WCF service to perform this job. OOTB, I’ve set it to work with NTLM, but if you need to make it work alternate authentications such as forms based auth, or client side certs, you will need to edit the %14%\ISAPI\Winsmarts.CrossSCNav\web.config file, specifically, this section - 1: <bindings> 2: <webHttpBinding> 3: <binding name="customWebHttpBinding"> 4: <security mode="TransportCredentialOnly"> 5: <transport clientCredentialType="Ntlm"/> 6: </security> 7: </binding> 8: </webHttpBinding> 9: </bindings> For Kerberos, change the “clientCredentialType” to “Windows” For Forms auth, remove that transport line For client certs – well that’s a bit more involved, but it’s just web.config changes – hit a good book on WCF or hire me for a billion trillion $. But fair warning, I might be too busy to help immediately. If you’re running into a different problem, please leave a comment below, but the code is pretty rock solid, so .. hmm .. check what you’re doing! BTW, I don’t  make any guarantee/warranty on this – if this code makes you sterile, unpopular, bad hairstyle, anything else, that is your problem! But, there are some known issues - I wrote this as a concept – you can easily extend it to be more flexible. Example, hierarchical nav, or, horizontal nav, jazzy effects with jquery or silverlight– all those are possible very very easily. This webpart is not smart enough to co-exist with another instance of itself on the same page. I can easily extend it to do so, which I will do in my spare(!?) time! Okay good! But that’s not all! As you can see, just dropping the WebPart may show you many extraneous site collections, or maybe you want to restrict which site collections are shown, or exclude a certain site collection to be shown from the navigation. To support that, I created a property on the WebPart called “UrlMatchPattern”, which is a regex expression you specify to trim the results :). So, just edit the WebPart, and specify a string property of “http://sp2010/sites/” as shown below. Note that you can put in whatever regex expression you want! So go crazy, I don’t care! And this gives you a cleaner look.   w00t! Enjoy! Comment on the article ....

    Read the article

  • Compiling for T4

    - by Darryl Gove
    I've recently had quite a few queries about compiling for T4 based systems. So it's probably a good time to review what I consider to be the best practices. Always use the latest compiler. Being in the compiler team, this is bound to be something I'd recommend But the serious points are that (a) Every release the tools get better and better, so you are going to be much more effective using the latest release (b) Every release we improve the generated code, so you will see things get better (c) Old releases cannot know about new hardware. Always use optimisation. You should use at least -O to get some amount of optimisation. -xO4 is typically even better as this will add within-file inlining. Always generate debug information, using -g. This allows the tools to attribute information to lines of source. This is particularly important when profiling an application. The default target of -xtarget=generic is often sufficient. This setting is designed to produce a binary that runs well across all supported platforms. If the binary is going to be deployed on only a subset of architectures, then it is possible to produce a binary that only uses the instructions supported on these architectures, which may lead to some performance gains. I've previously discussed which chips support which architectures, and I'd recommend that you take a look at the chart that goes with the discussion. Crossfile optimisation (-xipo) can be very useful - particularly when the hot source code is distributed across multiple source files. If you're allowed to have something as geeky as favourite compiler optimisations, then this is mine! Profile feedback (-xprofile=[collect: | use:]) will help the compiler make the best code layout decisions, and is particularly effective with crossfile optimisations. But what makes this optimisation really useful is that codes that are dominated by branch instructions don't typically improve much with "traditional" compiler optimisation, but often do respond well to being built with profile feedback. The macro flag -fast aims to provide a one-stop "give me a fast application" flag. This usually gives a best performing binary, but with a few caveats. It assumes the build platform is also the deployment platform, it enables floating point optimisations, and it makes some relatively weak assumptions about pointer aliasing. It's worth investigating. SPARC64 processor, T3, and T4 implement floating point multiply accumulate instructions. These can substantially improve floating point performance. To generate them the compiler needs the flag -fma=fused and also needs an architecture that supports the instruction (at least -xarch=sparcfmaf). The most critical advise is that anyone doing performance work should profile their application. I cannot overstate how important it is to look at where the time is going in order to determine what can be done to improve it. I also presented at Oracle OpenWorld on this topic, so it might be helpful to review those slides.

    Read the article

  • Kernel compiling with -j2+ parameter ends prematurely with no error message or output bzImage

    - by Minix
    I've noticed quite a while ago that compiling a kernel with the parameter -j set to 1 or more doesn't produce a bzImage. Instead, it ends prematurely without any advice. I have reproduced the same behavior in both my netbook and home server. As far as I'm aware, the point where the compilation stops is random - Compiling twice with the same parameters will probably stop at different files. However, when I run make with no -j* parameter the compilation ends just fine and outputs a working bzImage. Both machines run Intel Atom (N270 on the netbook and 330 on the server) and I've compiled for these processors. If I recall correctly, I've tried compiling both with Atom and with generic x86_64 options. The kernel version I'm building is 2.6.34.1 I've always compiled normally with those options in my Core2Duo and Pentium Dual Core machines. Has anyone experienced this issue? Any ideas why does this happens? Is there a fix or workaround?

    Read the article

  • Cross-Platform Mobile Development With Mono for Android and MonoTouch

    - by Wallym
    Many years ago, in fact pre-Java, I remember a hallway discussion about the desire to write a single application that could easily run across various platforms. At the time, we were only worried about writing applications on Windows 3.1 and Mac OS 7.x. There were many discussions about windows, user interface concepts, and specifically a rather long discussion as to whether Mac users would accept a Mac application that didn't have balloon help. Thankfully, the marketplace answered this question for us with the Windows API winning the battle.A similar set of questions is currently going on in the mobile world. Unfortunately, at this point in time, there is currently no winning API and none currently in sight. What's a developer to do? Here are some questions that developers have (and there are many more):How can mobile developers target Android and the iPhone with the same code?How can .NET developers share their code across Android, iPhone and other platforms?How can developers give applications the look and feel of the specific platform and still allow as much code as possible to be shared?Mobile devices share many common features, such as cameras, accelerometers, and address books. How can we take advantage of them in a platform independent way and still give the users the look of every other application running on their platform?In this article, we'll look at some solutions to these cross-platform and code-sharing questions between Mono for Android, MonoTouch and the .NET Framework available to developers. 

    Read the article

  • Compiling NETGEAR WNR2000v3 firmware under 12.04.1 LTS

    - by Madmanguruman
    I'm trying to compile the GPL NETGEAR firmware for the WNR2000v3 router using Ubuntu 12.04.1 LTS. I've downloaded and extracted the source, installed everything I think I need, yet there are two build dependencies that I cannot resolve: > make menuconfig .... Build dependency: Please install ncurses. (Missing libncurses.so or ncurses.h) Build dependency: Please install zlib. (Missing libz.so or zlib.h) I've tried apt-getting all of the following packages: libncurses5 libncurses5:i386 libncurses5-dev zlib1g zlib1g-dev zlib1g-dbg The missing libs seem 'real': the target .so files aren't in /usr/lib, although the .h files are in /usr/include. EDIT: some Googling told me of broken or missing symlinks. I found the following: /lib/i386-linux-gnu/libncurses.so.5 -> libncurses.so.5.9 /lib/i386-linux-gnu/libncurses.so.5.9 /lib/i386-linux-gnu/libncursesw.so.5 -> libncursesw.so.5.9 /lib/i386-linux-gnu/libncursesw.so.5.9 /lib/i386-linux-gnu/libz.so.1 -> libz.so.1.2.3.4 /lib/i386-linux-gnu/libz.so.1.2.3.4 so I tried to symlink these to /usr/lib: /usr/lib/libncurses.so -> /lib/i386-linux-gnu/libncurses.so.5 /usr/lib/libz.so -> /lib/i386-linux-gnu/libz.so.1 but the project still complains about missing libncurses and zlib. EDIT: I was able to get the dependencies to work under 8.04. Need to cross-reference things now. Does anyone have some tips on how to debug this sort of issue?

    Read the article

  • Creating an expandable, cross-platform compatible program "core".

    - by Thomas Clayson
    Hi there. Basically the brief is relatively simple. We need to create a program core. An engine that will power all sorts of programs with a large number of distinct potential applications and deployments. The core will be an analytics and algorithmic processor which will essentially take user-specific input and output scenarios based on the information it gets, whilst recording this information for reporting. It needs to be cross platform compatible. Something that can have platform specific layers put on top which can interface with the core. It also needs to be able to be expandable, for instance, modular with developers being able to write "add-ons" or "extensions" which can alter the function of the end program and can use the core to its full extent. (For instance, a good example of what I'm looking to create is a browser. It has its main core, the web-kit engine, for instance, and then on top of this is has a platform-specific GUI and can also have add-ons and extensions which can change the behavior of the program.) Our problem is that the extensions need to interface directly with the main core and expand/alter that functionality rather than the platform specific "layer". So, given that I have no experience in this whatsoever (I have a PHP background and recently objective-c), where should I start, and is there any knowledge/wisdom you can impart on me please? Thanks for all the help and advice you can give me. :) If you need any more explanation just ask. At the moment its in the very early stages of development, so we're just researching all possible routes of development. Thanks a lot

    Read the article

  • GCC 4.2.1 Compiling on Cygwin(Win7 64bit) for iPhone [closed]

    - by Kenneth Noland
    Hey This is going to take a long while to explain, but the short version is that I am currently attempting to compile the LLVM GCC frontend for ARMv7 to compile apps for the Cortex-A8(iPhone 3GS). I'm running into an error from LD when compiling libgcc(part of the gcc compilation process) that has been driving me mad! The command is this: /usr/llvm-gcc-4.2-2.8.source/build/./gcc/xgcc \ -B/usr/llvm-gcc-4.2_2.8.source/build/./gcc \ -B/usr/local/arm-apple-darwin/bin \ -B/usr/local/arm-apple-darwin/lib \ -isystem /usr/local/arm-apple-darwin/include \ -isystem /usr/local/arm-apple-darwin/sys-include \ -O2 -g -W -Wall -Wwrite-strings -wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -fno-inline -dynamiclib -nodefaultlibs -W1,-dead_strip \ -marm \ -install_name /usr/local/arm-apple-darwin/lib/libgcc_s.1.dylib \ -single_module -o ./libgcc_s.1.dylib.tmp \ -W1,-exported_symbols_list,libgcc/./libgcc.map -compatibility_version 1 -current_version 1.0 -DIN_GCC -DCROSS_DIRECTORY_STRUCTURE -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -Dinhibit_libc \ ... long list of .o files ... \ -lc And the result is typically a lot of undefined references to malloc, free, exit, etc. which typically indicate that libc is not getting compiled in. After going through the list of errors that ld is throwing, I see at the top that it is attempting to pull in /usr/lib/libc.a and complains that it is not the correct platform. Okay, that makes sense, so I spent 5 minutes on google and found an answer. Turns out that if I copy the libSystem.dylib and rename it to libc.dylib, that should solve the problem, but it doesn't. I couldn't find a copy of that file on my phone, so I pulled it directly from the SDK. I then get this strange error: ld64: in /usr/local/arm-apple-darwin/lib/libc.dylib, can't re-map file, errno=22 At this point, I did everything I could think of. I grabbed a fresh copy of my /usr/lib folder from my iphone and confirmed that libSystem.dylib(and libSystem.B.dylib) wasn't there. I unpacked the raw .ipsw package for iOS 4.2.1 and once again, I could not find a copy of libSystem.dylib there either. I unpacked the iPhoneSDK and MacOS SDK and I managed to find a copy of it in both, but that error just kept persisting. I copied libSystem.dylib, libSystem.B.dylib, tried all sorts of combinations of renaming to libc.dylib and still nothing but errors. I can't find a way to get it to recognize the file and link against it. I also tried linking against the libc.a located in the iphone SDK and that didn't work either. I checked what ./xgcc was firing off, and it was my freshly built copy of arm-apple-darwin-ld64 which should be fine. A little bit of background here. I built LLVM+Clang 2.8 with no errors, and I rebuilt the ODCCTools with some light modifications to get it to compile on Cygwin(I'll post my changes in a patch along with a tutorial if I can get this to work). I also grabbed the iphone-dev "includes" and "csu" project and those completed successfully, although there really is no point to them since I can't get it to link against crt0.a. I'm running out of ideas here. Can anyone help me out on this?

    Read the article

  • Create Custom Sized Thumbnail Images with Simple Image Resizer [Cross-Platform]

    - by Asian Angel
    Are you looking for an easy way to create custom sized thumbnail images for use in blog posts, photo albums, and more? Whether is it a single image or a CD full, Simple Image Resizer is the right app to get the job done for you. To add the new PPA for Simple Image Resizer open the Ubuntu Software Center, go to the Edit Menu, and select Software Sources. Access the Other Software Tab in the Software Sources Window and add the first of the PPAs shown below (outlined in red). The second PPA will be automatically added to your system. Once you have the new PPAs set up, go back to the Ubuntu Software Center and click on the PPA listing for Rafael Sachetto on the left (highlighted with red in the image). The listing for Simple Image Resizer will be right at the top…click Install to add the program to your system. After the installation is complete you can find Simple Image Resizer listed as Sir in the Graphics sub-menu. When you open Simple Image Resizer you will need to browse for the directory containing the images you want to work with, select a destination folder, choose a target format and prefix, enter the desired pixel size for converted images, and set the quality level. Convert your image(s) when ready… Note: You will need to determine the image size that best suits your needs before-hand. For our example we chose to convert a single image. A quick check shows our new “thumbnailed” image looking very nice. Simple Image Resizer can convert “into and from” the following image formats: .jpeg, .png, .bmp, .gif, .xpm, .pgm, .pbm, and .ppm Command Line Installation Note: For older Ubuntu systems (9.04 and previous) see the link provided below. sudo add-apt-repository ppa:rsachetto/ppa sudo apt-get update && sudo apt-get install sir Links Note: Simple Image Resizer is available for Ubuntu, Slackware Linux, and Windows. Simple Image Resizer PPA at Launchpad Simple Image Resizer Homepage Command Line Installation for Older Ubuntu Systems Bonus The anime wallpaper shown in the screenshots above can be found here: The end where it begins [DesktopNexus] Latest Features How-To Geek ETC Macs Don’t Make You Creative! So Why Do Artists Really Love Apple? MacX DVD Ripper Pro is Free for How-To Geek Readers (Time Limited!) HTG Explains: What’s a Solid State Drive and What Do I Need to Know? How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Create Shortcuts for Your Favorite or Most Used Folders in Ubuntu Create Custom Sized Thumbnail Images with Simple Image Resizer [Cross-Platform] Etch a Circuit Board using a Simple Homemade Mixture Sync Blocker Stops iTunes from Automatically Syncing The Journey to the Mystical Forest [Wallpaper] Trace Your Browser’s Roots on the Browser Family Tree [Infographic]

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >