Search Results

Search found 4451 results on 179 pages for 'fred 22'.

Page 13/179 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Connecting to network device behind NAT from local LAN using the external port and IP

  - by lumbric

  I noticed at several different LANs connected to the Internet through a NAT the following phenomena. There is a server in the LAN and there is a port forwarding to reach this server also from outside the LAN through the NAT. E.g. consider a LAN with the address 192.168.0.* and a SSH server at 192.168.0.2 with port 22 and a forwarding from port 2222 at the NAT 192.168.0.1 to 192.168.0.2:22. If the NAT's external IP is 44.33.22.11, one can connect to the SSH server through 44.33.22.11:2222. Surprisingly this works only from outside the LAN. If one tries to connect to 44.33.22.11:2222 from behind the NAT, there is no answer. Of course one could simply use 192.168.0.2:22, but often it is simpler to use the external IP. The typical use case for me is the configuration on a laptop computer. Usually the user uses any arbitrary Internet connection to connect to his home or office server, but sometimes he will use also the LAN to connect to it and it would be annoying to have to different configurations or bookmarks. Why does it fail to connect from inside the LAN? Is there any good work around?

  Read the article

• xorg, nvidia, log-in all hosed - how can I completely reset graphics set-up/settings?

  - by Fred Hamilton

  I just did a fresh install of Mythbuntu 12.04.1 on my Intel MB with nVidia 9500GT graphics card. Hardware's been working great with 10.10 for about 2 years. Background: (optional - feel free to skip to question) I was trying to get my component video output to generate 720p, messing around with the nvidia drivers, and now the entire display system is hosed. I can SSH in and get a terminal. Depending on which nvidia package I install/remove, I get: Garbage on screen (after I "apt-get remove nvidia*") A low-res graphical log-in screen where I can log in as fred or guest. If I log in as fred, it displays some text mode status line then goes right back to the log-in screen. If I log in as guest, I actually get the full Ubuntu desktop, but I need to be able to log in as fred. Other times I get an error: "API mismatch: the NVIDIA kernel module has version 304.43, but this NVIDIA driver component has version 295.49." I've googled around, including trying this thread with the same error message, but to no effect. Question: How can I just reset x settings, drivers, everything display-related to the exact same way it was after a fresh install?

  Read the article

• Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine [migrated]

  - by javadba

  I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

  Read the article

• Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine

  - by javadba

  I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

  Read the article

• What info is really useful in my iptables log and how do I disable the useless bits?

  - by anthony01

  In my iptables rules files, I entered this at the end: -A INPUT -j LOG --log-level 4 --log-ip-options --log-prefix "iptables: " I DROP everything besides INPUT for SSH (port 22) I have a web server and when I try to connect to it through my browser, through a forbidden port number (on purpose), I get something like that in my iptables.log Sep 24 14:05:57 myserver kernel: [xx.xx] iptables: IN=eth0 OUT= MAC=aa:bb:cc SRC=yy.yy.yy.yy DST=xx.xx.xx.xx LEN=64 TOS=0x00 PREC=0x00 TTL=54 ID=59351 DF PROTO=TCP SPT=63776 DPT=1999 WINDOW=65535 RES=0x00 SYN URGP=0 Sep 24 14:06:01 myserver kernel: [xx.xx] iptables: IN=eth0 OUT= MAC=aa:bb:cc SRC= yy.yy.yy.yy DST=xx.xx.xx.xx LEN=48 TOS=0x00 PREC=0x00 TTL=54 ID=63377 DF PROTO=TCP SPT=63776 DPT=1999 WINDOW=65535 RES=0x00 SYN URGP=0 Sep 24 14:06:09 myserver kernel: [xx.xx] iptables: IN=eth0 OUT= MAC=aa:bb:cc SRC=yy.yy.yy.yy DST=xx.xx.xx.xx LEN=48 TOS=0x00 PREC=0x00 TTL=54 ID=55025 DF PROTO=TCP SPT=63776 DPT=1999 WINDOW=65535 RES=0x00 SYN URGP=0 Sep 24 14:06:25 myserver kernel: [xx.xx] iptables: IN=eth0 OUT= MAC=aa:bb:cc SRC=yy.yy.yy.yy DST=xx.xx.xx.xx LEN=48 TOS=0x00 PREC=0x00 TTL=54 ID=54521 DF PROTO=TCP SPT=63776 DPT=1999 WINDOW=65535 RES=0x00 SYN URGP=0 Sep 24 14:06:55 myserver kernel: [xx.xx] iptables: IN=eth0 OUT= MAC=aa:bb:cc SRC=yy.yy.yy.yy DST=xx.xx.xx.xx LEN=100 TOS=0x00 PREC=0x00 TTL=54 ID=35050 PROTO=TCP SPT=63088 DPT=22 WINDOW=33304 RES=0x00 ACK PSH URGP=0 Sep 24 14:06:55 myserver kernel: [xx.xx] iptables: IN=eth0 OUT= MAC=aa:bb:cc SRC=yy.yy.yy.yy DST=xx.xx.xx.xx LEN=52 TOS=0x00 PREC=0x00 TTL=54 ID=14076 PROTO=TCP SPT=63088 DPT=22 WINDOW=33264 RES=0x00 ACK URGP=0 Sep 24 14:06:55 myserver kernel: [xx.xx] iptables: IN=eth0 OUT= MAC=aa:bb:cc SRC=yy.yy.yy.yy DST=xx.xx.xx.xx LEN=52 TOS=0x00 PREC=0x00 TTL=54 ID=5277 PROTO=TCP SPT=63088 DPT=22 WINDOW=33248 RES=0x00 ACK URGP=0 Sep 24 14:06:56 myserver kernel: [xx.xx] iptables: IN=eth0 OUT= MAC=aa:bb:cc SRC=yy.yy.yy.yy DST=xx.xx.xx.xx LEN=100 TOS=0x00 PREC=0x00 TTL=54 ID=25501 PROTO=TCP SPT=63088 DPT=22 WINDOW=33304 RES=0x00 ACK PSH URGP=0 As you can see, I typed xx.xx.xx.xx:1999 in my browser, and it tried to connect until it timed out. 1) There are many similar lines for just one event. Do you think I need all of them? How would I avoid duplicates? 2) The last 4 lines are for my port 22. But since I allow port 22 INPUT for my web server, why are they here? 3) Do I need info like LEN,TOS,PREC and others? I'm trying to find a page that explains them one by one, by I can't find anything.

  Read the article

• Python, a smarter way of string to integer conversion

  - by Hellnar

  Hello I have written this code to convert string in such format "0(532) 222 22 22" to integer such as 05322222222 . class Phone(): def __init__(self,input): self.phone = input def __str__(self): return self.phone #convert to integer. def to_int(self): return int((self.phone).replace(" ","").replace("(","").replace(")","")) test = Phone("0(532) 222 22 22") print test.to_int() It feels very clumsy to use 3 replace methods to solve this. I am curious if there is a better solution?

  Read the article

• migrating Solaris to RH: network latency issue, tcp window size & other tcp parameters

  - by Bastien

  Hello I have a client/server app (Java) that I'm migrating from Solaris to RH Linux. since I started running it in RH, I noticed some issues related to latency. I managed to isolate the problem that looks like this: client sends 5 messages (32 bytes each) in a row (same application timestamp) to the server. server echos messages. client receives replies and prints round trip time for each msg. in Solaris, all is well: I get ALL 5 replies at the same time, roughly 80ms after having sent original messages (client & server are several thousands miles away from each other: my ping RTT is 80ms, all normal). in RH, first 3 messages are echoed normally (they arrive 80ms after they've been sent), however the following 2 arrive 80ms later (so total 160ms RTT). the pattern is always the same. clearly looked like a TCP problem. on my solaris box, I had previously configured the tcp stack with 2 specific options: disable nagle algorithm globally set tcp_deferred_acks_max to 0 on RH, it's not possible to disable nagle globally, but I disabled it on all of my apps' sockets (TCP_NODELAY). so I started playing with tcpdump (on the server machine), and compared both outputs: SOLARIS: 22 2.085645 client server TCP 56150 > 6006 [PSH, ACK] Seq=111 Ack=106 Win=66672 Len=22 "MSG_1 RCV" 23 2.085680 server client TCP 6006 > 56150 [ACK] Seq=106 Ack=133 Win=50400 Len=0 24 2.085908 client server TCP 56150 > 6006 [PSH, ACK] Seq=133 Ack=106 Win=66672 Len=22 "MSG_2 RCV" 25 2.085925 server client TCP 6006 > 56150 [ACK] Seq=106 Ack=155 Win=50400 Len=0 26 2.086175 client server TCP 56150 > 6006 [PSH, ACK] Seq=155 Ack=106 Win=66672 Len=22 "MSG_3 RCV" 27 2.086192 server client TCP 6006 > 56150 [ACK] Seq=106 Ack=177 Win=50400 Len=0 28 2.086243 server client TCP 6006 > 56150 [PSH, ACK] Seq=106 Ack=177 Win=50400 Len=21 "MSG_1 ECHO" 29 2.086440 client server TCP 56150 > 6006 [PSH, ACK] Seq=177 Ack=106 Win=66672 Len=22 "MSG_4 RCV" 30 2.086454 server client TCP 6006 > 56150 [ACK] Seq=127 Ack=199 Win=50400 Len=0 31 2.086659 server client TCP 6006 > 56150 [PSH, ACK] Seq=127 Ack=199 Win=50400 Len=21 "MSG_2 ECHO" 32 2.086708 client server TCP 56150 > 6006 [PSH, ACK] Seq=199 Ack=106 Win=66672 Len=22 "MSG_5 RCV" 33 2.086721 server client TCP 6006 > 56150 [ACK] Seq=148 Ack=221 Win=50400 Len=0 34 2.086947 server client TCP 6006 > 56150 [PSH, ACK] Seq=148 Ack=221 Win=50400 Len=21 "MSG_3 ECHO" 35 2.087196 server client TCP 6006 > 56150 [PSH, ACK] Seq=169 Ack=221 Win=50400 Len=21 "MSG_4 ECHO" 36 2.087500 server client TCP 6006 > 56150 [PSH, ACK] Seq=190 Ack=221 Win=50400 Len=21 "MSG_5 ECHO" 37 2.165390 client server TCP 56150 > 6006 [ACK] Seq=221 Ack=148 Win=66632 Len=0 38 2.166314 client server TCP 56150 > 6006 [ACK] Seq=221 Ack=190 Win=66588 Len=0 39 2.364135 client server TCP 56150 > 6006 [ACK] Seq=221 Ack=211 Win=66568 Len=0 REDHAT: 17 2.081163 client server TCP 55879 > 6006 [PSH, ACK] Seq=111 Ack=106 Win=66672 Len=22 "MSG_1 RCV" 18 2.081178 server client TCP 6006 > 55879 [ACK] Seq=106 Ack=133 Win=5888 Len=0 19 2.081297 server client TCP 6006 > 55879 [PSH, ACK] Seq=106 Ack=133 Win=5888 Len=21 "MSG_1 ECHO" 20 2.081711 client server TCP 55879 > 6006 [PSH, ACK] Seq=133 Ack=106 Win=66672 Len=22 "MSG_2 RCV" 21 2.081761 client server TCP 55879 > 6006 [PSH, ACK] Seq=155 Ack=106 Win=66672 Len=22 "MSG_3 RCV" 22 2.081846 server client TCP 6006 > 55879 [PSH, ACK] Seq=127 Ack=177 Win=5888 Len=21 "MSG_2 ECHO" 23 2.081995 server client TCP 6006 > 55879 [PSH, ACK] Seq=148 Ack=177 Win=5888 Len=21 "MSG_3 ECHO" 24 2.082011 client server TCP 55879 > 6006 [PSH, ACK] Seq=177 Ack=106 Win=66672 Len=22 "MSG_4 RCV" 25 2.082362 client server TCP 55879 > 6006 [PSH, ACK] Seq=199 Ack=106 Win=66672 Len=22 "MSG_5 RCV" 26 2.082377 server client TCP 6006 > 55879 [ACK] Seq=169 Ack=221 Win=5888 Len=0 27 2.171003 client server TCP 55879 > 6006 [ACK] Seq=221 Ack=148 Win=66632 Len=0 28 2.171019 server client TCP 6006 > 55879 [PSH, ACK] Seq=169 Ack=221 Win=5888 Len=42 "MSG_4 ECHO + MSG_5 ECHO" 29 2.257498 client server TCP 55879 > 6006 [ACK] Seq=221 Ack=211 Win=66568 Len=0 so, I got confirmation things are not working correctly for RH: packet 28 is sent TOO LATE, it looks like the server is waiting for packet 27's ACK before doing anything. seems to me it's the most likely reason... then I realized that the "Win" parameters are different on Solaris & RH dumps: 50400 on Solaris, only 5888 on RH. that's another hint... I read the doc about the slide window & buffer window, and played around with the rcvBuffer & sendBuffer in java on my sockets, but never managed to change this 5888 value to anything else (I checked each time directly with tcpdump). does anybody know how to do this ? I'm having a hard time getting definitive information, as in some cases there's "auto-negotiation" that I might need to bypass, etc... I eventually managed to get only partially rid of my initial problem by setting the "tcp_slow_start_after_idle" parameter to 0 on RH, but it did not change the "win" parameter at all. the same problem was there for the first 4 groups of 5 messages, with TCP retransmission & TCP Dup ACK in tcpdump, then the problem disappeared altogether for all following groups of 5 messages. It doesn't seem like a very clean and/or generic solution to me. I'd really like to reproduce the exact same conditions under both OSes. I'll keep researching, but any help from TCP gurus would be greatly appreciated ! thanks !

  Read the article

• Tools to help with analysing log files

  - by peter

  I am developing a C# .NET application. In the app.config file I add trace logging as shown, <?xml version="1.0" encoding="UTF-8" ?> <configuration> <system.diagnostics> <trace autoflush="true" /> <sources> <source name="System.Net.Sockets" maxdatasize="1024"> <listeners> <add name="MyTraceFile"/> </listeners> </source> </sources> <sharedListeners> <add name="MyTraceFile" type="System.Diagnostics.TextWriterTraceListener" initializeData="System.Net.trace.log" /> </sharedListeners> <switches> <add name="System.Net" value="Verbose" /> </switches> </system.diagnostics> </configuration> Are there any good tools around to analyse the log file that is output? The output looks like this, System.Net.Sockets Verbose: 0 : [5900] Data from Socket#8764489::Send DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000000 : 4D 49 4D 45 2D 56 65 72-73 69 6F 6E 3A 20 31 2E : MIME-Version: 1. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000060 : 65 3A 20 37 20 41 70 72-20 32 30 31 30 20 31 35 : e: 7 Apr 2010 15 DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000070 : 3A 32 32 3A 34 30 20 2B-31 32 30 30 0D 0A 53 75 : :22:40 +1200..Su DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000080 : 62 6A 65 63 74 3A 20 5B-45 72 72 6F 72 5D 20 45 : bject: [Error] E DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000090 : 78 63 65 70 74 69 6F 6E-20 69 6E 20 53 79 6E 63 : xception in Sync DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000A0 : 53 65 72 76 69 63 65 20-28 32 30 30 38 2E 30 2E : Service (2008.0. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000B0 : 33 30 34 2E 31 32 33 34-32 29 0D 0A 43 6F 6E 74 : 304.12342)..Cont DateTime=2010-04-07T03:22:40.1067012Z Is there anything that can take the output shown above (my output is a text file 100mb in size), group together packets, and help out with finding particular issues I would like to hear about it. Thanks.

  Read the article

• Tools to Help out with

  - by peter

  I am developing a C# .NET application. In the app.config file I add trace logging as shown, <?xml version="1.0" encoding="UTF-8" ?> <configuration> <system.diagnostics> <trace autoflush="true" /> <sources> <source name="System.Net.Sockets" maxdatasize="1024"> <listeners> <add name="MyTraceFile"/> </listeners> </source> </sources> <sharedListeners> <add name="MyTraceFile" type="System.Diagnostics.TextWriterTraceListener" initializeData="System.Net.trace.log" /> </sharedListeners> <switches> <add name="System.Net" value="Verbose" /> </switches> </system.diagnostics> </configuration> Are there any good tools around to analyse the log file that is output? The output looks like this, System.Net.Sockets Verbose: 0 : [5900] Data from Socket#8764489::Send DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000000 : 4D 49 4D 45 2D 56 65 72-73 69 6F 6E 3A 20 31 2E : MIME-Version: 1. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000060 : 65 3A 20 37 20 41 70 72-20 32 30 31 30 20 31 35 : e: 7 Apr 2010 15 DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000070 : 3A 32 32 3A 34 30 20 2B-31 32 30 30 0D 0A 53 75 : :22:40 +1200..Su DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000080 : 62 6A 65 63 74 3A 20 5B-45 72 72 6F 72 5D 20 45 : bject: [Error] E DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000090 : 78 63 65 70 74 69 6F 6E-20 69 6E 20 53 79 6E 63 : xception in Sync DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000A0 : 53 65 72 76 69 63 65 20-28 32 30 30 38 2E 30 2E : Service (2008.0. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000B0 : 33 30 34 2E 31 32 33 34-32 29 0D 0A 43 6F 6E 74 : 304.12342)..Cont DateTime=2010-04-07T03:22:40.1067012Z Is there anything that can take the output shown above (my output is a text file 100mb in size), group together packets, and help out with finding particular issues I would like to hear about it. Thanks.

  Read the article

• Anybody Know of any Tools to help Analysing .NET Trace Log Files?

  - by peter

  I am developing a C# .NET application. In the app.config file I add trace logging as shown, <?xml version="1.0" encoding="UTF-8" ?> <configuration> <system.diagnostics> <trace autoflush="true" /> <sources> <source name="System.Net.Sockets" maxdatasize="1024"> <listeners> <add name="MyTraceFile"/> </listeners> </source> </sources> <sharedListeners> <add name="MyTraceFile" type="System.Diagnostics.TextWriterTraceListener" initializeData="System.Net.trace.log" /> </sharedListeners> <switches> <add name="System.Net" value="Verbose" /> </switches> </system.diagnostics> </configuration> Are there any good tools around to analyse the log file that is output? The output looks like this, System.Net.Sockets Verbose: 0 : [5900] Data from Socket#8764489::Send DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000000 : 4D 49 4D 45 2D 56 65 72-73 69 6F 6E 3A 20 31 2E : MIME-Version: 1. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000060 : 65 3A 20 37 20 41 70 72-20 32 30 31 30 20 31 35 : e: 7 Apr 2010 15 DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000070 : 3A 32 32 3A 34 30 20 2B-31 32 30 30 0D 0A 53 75 : :22:40 +1200..Su DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000080 : 62 6A 65 63 74 3A 20 5B-45 72 72 6F 72 5D 20 45 : bject: [Error] E DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 00000090 : 78 63 65 70 74 69 6F 6E-20 69 6E 20 53 79 6E 63 : xception in Sync DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000A0 : 53 65 72 76 69 63 65 20-28 32 30 30 38 2E 30 2E : Service (2008.0. DateTime=2010-04-07T03:22:40.1067012Z System.Net.Sockets Verbose: 0 : [5900] 000000B0 : 33 30 34 2E 31 32 33 34-32 29 0D 0A 43 6F 6E 74 : 304.12342)..Cont DateTime=2010-04-07T03:22:40.1067012Z Is there anything that can take the output shown above (my output is a text file 100mb in size), group together packets, and help out with finding particular issues I would like to hear about it. Thanks.

  Read the article

• Use Awk to Print every character as its own column?

  - by wizkid84

  Hi there, I am in need of reorganizing a large CSV file. The first column, which is currently a 6 digit number needs to be split up, using comma's as the field separator. For example, I need this: 022250,10:50 AM,274,22,50 022255,11:55 AM,275,22,55 turned into this: 0,2,2,2,5,0,10:50 AM,274,22,50 0,2,2,2,5,5,11:55 AM,275,22,55 Let me know what you think! Thanks!

  Read the article

• How do I maintain rows when sorting a matrix in MATLAB?

  - by Jessy

  I have a 2-by-3 matrix, and I want to sort it according to the first column. Here's an example: data will change to --> new data 11 33 10 22 22 44 11 33 10 22 22 44 I have this code for sorting a matrix A but it doesn't work well: sort(A,1,'ascend');

  Read the article

• Can't launch glassfish on ec2 - can't open port

  - by orange80

  I'm trying to start glassfish on an EBS-based AMI of Ubuntu 10.04 64-bit. I have used glassfish on non-ec2 servers with no problems, but on ec2 I get this message: $ sudo -u glassfish bin/asadmin start-domain domain1 There is a process already using the admin port 4848 -- it probably is another instance of a GlassFish server. Command start-domain failed. I know that ec2 has requires that firewall rules be modified using ec2-authorize to let outside traffic thru the firewall, as I had to do to make ssh work. This still doesn't explain the port error when all I'm trying to do is start glassfish so I can try $ wget localhost:8080and make sure it's working. This is very frustrating and I'd really appreciate any help. Thanks. FINAL UPDATE: Sorry if you came here looking for answers. I never figured out what was causing the problem. I created another fresh instance, installed the same stuff, and Glassfish worked perfectly. Something obviously got boned during installation, but I have no idea what. I guess it will remain a mystery. UPDATE: Here's what I get from netstat: # netstat -nuptl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 462/sshd tcp6 0 0 :::22 :::* LISTEN 462/sshd udp 0 0 0.0.0.0:5353 0.0.0.0:* 483/avahi-daemon: r udp 0 0 0.0.0.0:1194 0.0.0.0:* 589/openvpn udp 0 0 0.0.0.0:37940 0.0.0.0:* 483/avahi-daemon: r udp 0 0 0.0.0.0:68 0.0.0.0:* 377/dhclient3 UPDATE: One more thing... I know that the "net.ipv6.bindv6only" kernel option can cause problems with java networking, so I did set this: # sysctl -w net.ipv6.bindv6only=0 UPDATE: I also verified that it has nothing at all to do with the port number (4848). As you can see here, when I changed the admin-listener port in domain.xml to 4949, I get a similar message: # sudo -u glassfish bin/asadmin start-domain domain1 There is a process already using the admin port 4949 -- it probably is another instance of a GlassFish server. Command start-domain failed. UPDATE: Here are the contents of /etc/hosts: 127.0.0.1 localhost # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts I should mention that I have another Ubuntu Lucid 10.04 64-bit slice that is NOT hosted on ec2, and set it up the exact same way with no problems whatsoever. Also server.log doesn't offer much insight either: # cat ./server.log Nov 20, 2010 8:46:49 AM com.sun.enterprise.admin.launcher.GFLauncherLogger info INFO: JVM invocation command line: /usr/lib/jvm/java-6-sun-1.6.0.22/bin/java -cp /opt/glassfishv3/glassfish/modules/glassfish.jar -XX:+UnlockDiagnosticVMOptions -XX:MaxPermSize=192m -XX:NewRatio=2 -XX:+LogVMOutput -XX:LogFile=/opt/glassfishv3/glassfish/domains/domain1/logs/jvm.log -Xmx512m -client -javaagent:/opt/glassfishv3/glassfish/lib/monitor/btrace-agent.jar=unsafe=true,noServer=true -Dosgi.shell.telnet.maxconn=1 -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver -Dfelix.fileinstall.dir=/opt/glassfishv3/glassfish/modules/autostart/ -Djavax.net.ssl.keyStore=/opt/glassfishv3/glassfish/domains/domain1/config/keystore.jks -Dosgi.shell.telnet.port=6666 -Djava.security.policy=/opt/glassfishv3/glassfish/domains/domain1/config/server.policy -Dfelix.fileinstall.poll=5000 -Dcom.sun.aas.instanceRoot=/opt/glassfishv3/glassfish/domains/domain1 -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory -Dosgi.shell.telnet.ip=127.0.0.1 -Djava.endorsed.dirs=/opt/glassfishv3/glassfish/modules/endorsed:/opt/glassfishv3/glassfish/lib/endorsed -Dcom.sun.aas.installRoot=/opt/glassfishv3/glassfish -Djava.ext.dirs=/usr/lib/jvm/java-6-sun-1.6.0.22/lib/ext:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/ext:/opt/glassfishv3/glassfish/domains/domain1/lib/ext -Dfelix.fileinstall.bundles.new.start=true -Djavax.net.ssl.trustStore=/opt/glassfishv3/glassfish/domains/domain1/config/cacerts.jks -Dcom.sun.enterprise.security.httpsOutboundKeyAlias=s1as -Djava.security.auth.login.config=/opt/glassfishv3/glassfish/domains/domain1/config/login.conf -DANTLR_USE_DIRECT_CLASS_LOADING=true -Dfelix.fileinstall.debug=1 -Dorg.glassfish.web.rfc2109_cookie_names_enforced=false -Djava.library.path=/opt/glassfishv3/glassfish/lib:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/amd64/server:/usr/lib/jvm/java-6-sun-1.6.0.22/jre/lib/amd64:/usr/lib/jvm/java-6-sun-1.6.0.22/lib/amd64:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib com.sun.enterprise.glassfish.bootstrap.ASMain -domainname domain1 -asadmin-args start-domain,,,domain1 -instancename server -verbose false -debug false -asadmin-classpath /opt/glassfishv3/glassfish/modules/admin-cli.jar -asadmin-classname com.sun.enterprise.admin.cli.AsadminMain -upgrade false -domaindir /opt/glassfishv3/glassfish/domains/domain1 -read-stdin true

  Read the article

• Iptables blocking mysql port 3306

  - by valmar

  I got a Tomcat server running a web application that must access a mysql server via Hibernate on the same machine. So, I added a rule for port 3306 to my iptables script but tomcat cannot connect to the mysql server for some reason. I need to reset all iptables rules - Then tomcat can connect to the mysql server again. All the other iptables rules work perfectly though. What's wrong? Here is my script: iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp --dport 24 -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A OUTPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp -s localhost --dport 8009 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -d localhost --dport 8009 -j ACCEPT iptables -A INPUT -p tcp -s localhost --dport 3306 -j ACCEPT iptables -A OUTPUT -p tcp -d localhost --dport 3306 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A OUTPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp --dport 25 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 25 -j ACCEPT iptables -A INPUT -p tcp --dport 587 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 587 -j ACCEPT iptables -A INPUT -p tcp --dport 465 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 465 -j ACCEPT iptables -A INPUT -p tcp --dport 110 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 110 -j ACCEPT iptables -A INPUT -p tcp --dport 995 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 995 -j ACCEPT iptables -A INPUT -p tcp --dport 143 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 143 -j ACCEPT iptables -A INPUT -p tcp --dport 993 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp --dport 993 -j ACCEPT iptables -A INPUT -j DROP My /etc/hosts file: # nameserver config # IPv4 127.0.0.1 localhost 46.4.7.93 mydomain.com 46.4.7.93 Ubuntu-1004-lucid-64-minimal 46.4.7.93 horst # IPv6 ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts Having a look into the iptables logs, gives me this: Jun 22 16:52:43 Ubuntu-1004-lucid-64-minimal kernel: [ 435.111780] denied-input IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=127.0.0.1 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=52432 DF PROTO=TCP SPT=56108 DPT=8009 WINDOW=32792 RES=0x00 SYN URGP=0 Jun 22 16:52:46 Ubuntu-1004-lucid-64-minimal kernel: [ 438.110555] denied-input IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=127.0.0.1 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=52433 DF PROTO=TCP SPT=56108 DPT=8009 WINDOW=32792 RES=0x00 SYN URGP=0 Jun 22 16:52:46 Ubuntu-1004-lucid-64-minimal kernel: [ 438.231954] denied-input IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=127.0.0.1 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=48020 DF PROTO=TCP SPT=56109 DPT=8009 WINDOW=32792 RES=0x00 SYN URGP=0 Jun 22 16:52:49 Ubuntu-1004-lucid-64-minimal kernel: [ 441.229778] denied-input IN=lo OUT= MAC=00:00:00:00:00:00:00:00:00:00:00:00:08:00 SRC=127.0.0.1 DST=127.0.0.1 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=48021 DF PROTO=TCP SPT=56109 DPT=8009 WINDOW=32792 RES=0x00 SYN URGP=0 Jun 22 16:53:57 Ubuntu-1004-lucid-64-minimal kernel: [ 508.731839] denied-input IN=eth0 OUT= MAC=6c:62:6d:85:bf:0e:00:26:88:75:dc:01:08:00 SRC=78.92.97.67 DST=46.4.7.93 LEN=64 TOS=0x00 PREC=0x00 TTL=122 ID=23053 DF PROTO=TCP SPT=1672 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0 Jun 22 16:53:59 Ubuntu-1004-lucid-64-minimal kernel: [ 511.625038] denied-input IN=eth0 OUT= MAC=6c:62:6d:85:bf:0e:00:26:88:75:dc:01:08:00 SRC=78.92.97.67 DST=46.4.7.93 LEN=64 TOS=0x00 PREC=0x00 TTL=122 ID=23547 DF PROTO=TCP SPT=1672 DPT=445 WINDOW=65535 RES=0x00 SYN URGP=0 Jun 22 16:54:22 Ubuntu-1004-lucid-64-minimal kernel: [ 533.981995] denied-input IN=eth0 OUT= MAC=6c:62:6d:85:bf:0e:00:26:88:75:dc:01:08:00 SRC=27.254.39.16 DST=46.4.7.93 LEN=48 TOS=0x00 PREC=0x00 TTL=117 ID=6549 PROTO=TCP SPT=6005 DPT=33796 WINDOW=64240 RES=0x00 ACK SYN URGP=0 Jun 22 16:54:44 Ubuntu-1004-lucid-64-minimal kernel: [ 556.297038] denied-input IN=eth0 OUT= MAC=6c:62:6d:85:bf:0e:00:26:88:75:dc:01:08:00 SRC=94.78.93.41 DST=46.4.7.93 LEN=40 TOS=0x00 PREC=0x00 TTL=52 ID=7712 PROTO=TCP SPT=57598 DPT=445 WINDOW=512 RES=0x00 SYN URGP=0

  Read the article

• SQL2008R2 install issues on windows 7 - unable to install setup support files?

  - by Liam

  I am trying to install the above but am getting the following errors when its attempting to install the setup support files, This is the first error that occurs during installation of the setup support files TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401 This is the second error that occurs after clicking continue in the installer after the first error is generated TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: SQL Server Setup has encountered an error when running a Windows Installer file. Windows Installer error message: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer file: C:\Users\watto_uk\Desktop\In-Digital\Software\Microsoft\SQL Server 2008 R2\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110713_205508\SqlSupport_Cpu64_1_ComponentUpdate.log Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDC80C325 These errors are generated from an ISO package downloaded from Microsoft. I have also tried using the web platform installer to install the express version instead but the SQL Server Installation fails with that also. The management studio installs fine but not the server. I have checked to make sure that the Windows Installer is started and it is. Cant seem to find an answer for this anywhere as all previous reported issues appear to be related to XP. I did have the express edition installed on the machine previously but uninstalled it to upgrade to the full version, I wish I hadn't now. Can anyone kindly offer any advice or point me in the right direction to stop me going insane with this? Any advice will be appreciated. Update======================= After digging a bit deeper ive located details of the error from the setup log file, i can also upload the log file if required. MSI (s) (E8:28) [23:35:18:705]: Assembly Error:The module '%1' was expected to contain an assembly manifest. MSI (s) (E8:28) [23:35:18:705]: Note: 1: 1935 2: 3: 0x80131018 4: IStream 5: Commit 6: MSI (s) (E8:28) [23:35:18:705]: Note: 1: 2337 2: 0 3: Microsoft.SqlServer.GridControl.dll MSI (s) (E8:28) [23:35:22:869]: Product: Microsoft SQL Server 2008 R2 Setup (English) -- Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:916]: Internal Exception during install operation: 0xc0000005 at 0x000007FEE908A23E. MSI (s) (E8:28) [23:35:22:916]: WER report disabled for silent install. MSI (s) (E8:28) [23:35:22:932]: Internal MSI error. Installer terminated prematurely. Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:932]: MainEngineThread is returning 1603 MSI (s) (E8:58) [23:35:22:932]: RESTART MANAGER: Session closed. Installer stopped prematurely. MSI (c) (0C:14) [23:35:22:947]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (0C:14) [23:35:22:947]: MainEngineThread is returning 1601 === Verbose logging stopped: 13/07/2011 23:35:22 ===

  Read the article

• Why am I unable to telnet to a local port that has a listening service?

  - by Skip Huffman

  I suspect this is either a very simple question, or a very complex one. I have a headless server running ubuntu 10.04 that I can ssh into. I have full root access to the system. I am trying to set up an ssh tunnel to allow me to vnc to the system (but that isn't my question. I have vnc running on port 5903, here is the netstat output for that: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:5903 0.0.0.0:* LISTEN 7173/Xtightvnc tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 465/sshd But when I try to telnet to that port, from within the same system and login, I get unable to connect errors # telnet localhost 5903 Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection timed out I am able to telnet to port 22 (as a verification) ~# telnet localhost 22 Trying ::1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 I have tried to open up any possible ports using ufw (probably clumsy fashion) # ufw status numbered Status: active To Action From -- ------ ---- [ 1] 5903 ALLOW IN Anywhere [ 2] 22 ALLOW IN Anywhere What else might be blocking this connection locally? Thank you, Edit: The only reference to port 5903 in iptable -L -n is this: Chain ufw-user-input (1 references) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5903 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:5903 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:8080 I can post the whole output if that will be useful. hosts.allow and hosts.deny both contain only comments. Re-Edit: Some other questions pointed me to nmap, so I ran a portscan through that utility: # nmap -v -sT localhost -p1-65535 Starting Nmap 5.00 ( http://nmap.org ) at 2011-11-09 09:58 PST NSE: Loaded 0 scripts for scanning. Warning: Hostname localhost resolves to 2 IPs. Using 127.0.0.1. Initiating Connect Scan at 09:58 Scanning localhost (127.0.0.1) [65535 ports] Discovered open port 22/tcp on 127.0.0.1 Connect Scan Timing: About 18.56% done; ETC: 10:01 (0:02:16 remaining) Connect Scan Timing: About 44.35% done; ETC: 10:00 (0:01:17 remaining) Completed Connect Scan at 10:00, 112.36s elapsed (65535 total ports) Host localhost (127.0.0.1) is up (0.00s latency). Interesting ports on localhost (127.0.0.1): Not shown: 65533 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp closed http Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 112.43 seconds Raw packets sent: 0 (0B) | Rcvd: 0 (0B) I think this shows that 5903 is blocked somehow. Which I pretty much knew. The question remains what is blocking it and how to modify. Re-re-edit: To check Paul Lathrop's suggested answer, I first verified my ip address with ifconfig: eth0 Link encap:Ethernet HWaddr 02:16:3e:42:28:8f inet addr:10.0.10.3 Bcast:10.0.10.255 Mask:255.255.255.0 Then tried to telnet to 5903 from that address: # telnet 10.0.10.3 5903 Trying 10.0.10.3... telnet: Unable to connect to remote host: Connection timed out No luck. Re-re-re-re-edit: Ok, I think I have isolated it a bit to vncserver, not the firewall, darn it. I shut off vncserver and had netcat listen on port 5903. My vnc client then was able to establish a connnection and sit and wait for a response. Looks like I should be chasing a vnc problem. At least that is progress Thanks for the help

  Read the article

• Someone is using the struct name as a variable name too. What does the code really say? (c++)

  - by EvilTeach

  This morning we found an old chunk of code that was causing a library call to crash. struct fred { int a; int b; int c; }; fred fred[MAX_SIZE+1]; memset( fred, 0, sizeof(fred) * MAX_SIZE+1 ); It appears that the sizeof(fred) may have been the full array size, rather than the structure size, as it was overwriting a great deal of memory. The fact that it compiled without warning on several different systems seemed odd. Is there a correct semantic for this case where the type and variable name are colliding? or is this some sort of undefined behavior? or just a defect? I haven't been been clever enough to find anything on Google or our language help. Thanks Evil

  Read the article

• 500 Metro Style WP7 Icons

  - by Bil Simser

  I was inspired by The Noun Project, a project that offers up “Metro-style” icons in SVG format. The project is licensed under a public domain license and while it’s a great project, all of the content is in SVG format. Jon Galloway has a great post (from 2007) talking about the differences between SVG and XAML so I highly recommend that for some background. I thought it would be helpful to the WPF/Windows Phone 7/Silverlight community to provide the content in alternative formats for use in your applications. The Goods I’ve put together a package of the 500 icons (502 actually) in PNG, XAML and the original SVG format along with a couple of sample projects so you can see them in action. There’s a WPF desktop app: And a Windows Phone 7 app: Building It To get all the content first I wrote up a quick program to suck the original SVG files. Luckily they’re all in a common path just named 1.SVG, 2.SVG, and so on. Easy sleazy to grab the contents. Once I had 500 SVG files I used the latest copy of XamlTune, an open source CodePlex project that has a command line conversion tool to convert the directory of SVG files into XAML (the tool also created a PNG file of each SVG so that’s just icing on the cake). Conversions The conversion from SVG to XAML isn’t 100%. While you can just drop the content into a WPF app, it doesn’t work that way for WP7. There are just some small adjustments I made to each format so you’ll have to do the same. Follow the information below or refer to the sample applications. As a sample, here’s an icon we want to use: Here’s the original SVG file: <svg version="1.0" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px" width="100px" height="94.616px" viewBox="0 0 100 94.616" enable-background="new 0 0 100 94.616" xml:space="preserve"> <path d="M25.076,15.639c4.324,0.009,7.824-3.488,7.82-7.82C32.9,3.512,29.4,0.012,25.076,0c-4.313,0.012-7.814,3.512-7.821,7.819 C17.262,12.15,20.763,15.648,25.076,15.639L25.076,15.639z"/> <path d="M4.593,43.388h6.861l4.137-15.135h1.716L13.22,43.388h24.318l-4.389-15.135h1.817l2.32,7.415 c1.08,3.131,3.852,3.851,6.003,1.162l8.375-10.142c2.651-3.42-2.104-7.021-4.844-4.035l-4.993,5.952 c0.007,0.095-0.96-3.278-0.96-3.278c-1.135-3.978-4.918-7.903-10.595-7.922H19.576c-5.071,0.019-9.043,4.434-9.888,7.214 L4.593,43.388L4.593,43.388z"/> <polygon points="56.206,22.753 56.206,7.163 49.192,7.163 49.192,22.753 56.206,22.753 "/> <path d="M79.87,15.738c4.332-0.014,7.831-3.516,7.82-7.82c0.011-4.332-3.488-7.833-7.82-7.82c-4.306-0.013-7.806,3.488-7.821,7.82 C72.064,12.222,75.564,15.725,79.87,15.738L79.87,15.738z"/> <path d="M89.759,89.556v-43.19h5.751V22.804c0.007-3.079-2.757-5.448-6.71-5.449H70.436c-3.65,0.001-4.539,1.186-5.551,2.168 L49.597,37.889c-3.098,3.848,2.428,8.333,5.55,4.743L69.88,25.226v64.43c-0.019,6.475,9.06,6.686,9.081,0.201v-36.58h1.765v36.379 C80.748,96.109,89.772,96.13,89.759,89.556L89.759,89.556z"/> <polygon points="100,54.035 100,45.155 0,45.155 0,54.035 100,54.035 "/> </svg> Here’s the XAML that XamlTune created. It can be used in any WPF app without any changes: <Canvas Name="Layer_1" Width="100" Height="94.616" ClipToBounds="True" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M25.076,15.639C29.4,15.648 32.9,12.151 32.896,7.819 32.9,3.512 29.4,0.012 25.076,0 20.763,0.012 17.262,3.512 17.255,7.819 17.262,12.15 20.763,15.648 25.076,15.639L25.076,15.639z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M4.593,43.388L11.454,43.388 15.591,28.253 17.307,28.253 13.22,43.388 37.538,43.388 33.149,28.253 34.966,28.253 37.286,35.668C38.366,38.799,41.138,39.519,43.289,36.83L51.664,26.688C54.315,23.268,49.56,19.667,46.82,22.653L41.827,28.605C41.834,28.7 40.867,25.327 40.867,25.327 39.732,21.349 35.949,17.424 30.272,17.405L19.576,17.405C14.505,17.424,10.533,21.839,9.688,24.619L4.593,43.388 4.593,43.388z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M56.206,22.753L56.206,7.163 49.192,7.163 49.192,22.753 56.206,22.753z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M79.87,15.738C84.202,15.724 87.701,12.222 87.69,7.918 87.701,3.586 84.202,0.0849999999999991 79.87,0.097999999999999 75.564,0.084999999999999 72.064,3.586 72.049,7.918 72.064,12.222 75.564,15.725 79.87,15.738L79.87,15.738z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M89.759,89.556L89.759,46.366 95.51,46.366 95.51,22.804C95.517,19.725,92.753,17.356,88.8,17.355L70.436,17.355C66.786,17.356,65.897,18.541,64.885,19.523L49.597,37.889C46.499,41.737,52.025,46.222,55.147,42.632L69.88,25.226 69.88,89.656C69.861,96.131,78.94,96.342,78.961,89.857L78.961,53.277 80.726,53.277 80.726,89.656C80.748,96.109,89.772,96.13,89.759,89.556L89.759,89.556z" /> </Path.Data> </Path> <Path Fill="#FF000000"> <Path.Data> <PathGeometry FillRule="Nonzero" Figures="M100,54.035L100,45.155 0,45.155 0,54.035 100,54.035z" /> </Path.Data> </Path> </Canvas> The XAML works AS-IS in a WPF application but there are some changes I did to get it to work in a WP7 app. Here’s the modified XAML in a WP7 application: <Canvas Grid.Row="0" Grid.Column="0" Name="Icon_1" Width="100" Height="94.616"> <Path Fill="#FF000000" Data="M25.076,15.639C29.4,15.648 32.9,12.151 32.896,7.819 32.9,3.512 29.4,0.012 25.076,0 20.763,0.012 17.262,3.512 17.255,7.819 17.262,12.15 20.763,15.648 25.076,15.639L25.076,15.639z"> </Path> <Path Fill="#FF000000" Data="M4.593,43.388L11.454,43.388 15.591,28.253 17.307,28.253 13.22,43.388 37.538,43.388 33.149,28.253 34.966,28.253 37.286,35.668C38.366,38.799,41.138,39.519,43.289,36.83L51.664,26.688C54.315,23.268,49.56,19.667,46.82,22.653L41.827,28.605C41.834,28.7 40.867,25.327 40.867,25.327 39.732,21.349 35.949,17.424 30.272,17.405L19.576,17.405C14.505,17.424,10.533,21.839,9.688,24.619L4.593,43.388 4.593,43.388z"> </Path> <Path Fill="#FF000000" Data="M56.206,22.753L56.206,7.163 49.192,7.163 49.192,22.753 56.206,22.753z"> </Path> <Path Fill="#FF000000" Data="M79.87,15.738C84.202,15.724 87.701,12.222 87.69,7.918 87.701,3.586 84.202,0.0849999999999991 79.87,0.097999999999999 75.564,0.084999999999999 72.064,3.586 72.049,7.918 72.064,12.222 75.564,15.725 79.87,15.738L79.87,15.738z"> </Path> <Path Fill="#FF000000" Data="M89.759,89.556L89.759,46.366 95.51,46.366 95.51,22.804C95.517,19.725,92.753,17.356,88.8,17.355L70.436,17.355C66.786,17.356,65.897,18.541,64.885,19.523L49.597,37.889C46.499,41.737,52.025,46.222,55.147,42.632L69.88,25.226 69.88,89.656C69.861,96.131,78.94,96.342,78.961,89.857L78.961,53.277 80.726,53.277 80.726,89.656C80.748,96.109,89.772,96.13,89.759,89.556L89.759,89.556z"> </Path> <Path Fill="#FF000000" Data="M100,54.035L100,45.155 0,45.155 0,54.035 100,54.035z"> </Path> </Canvas> All I did was take the data portion and put it directly into a Data attribute on the Path. Note that while it does show up in the app (on the emulator or device) it wouldn’t show up in Visual Studio for me. Maybe some XAML guru out there can tell me why. You can just as easily use the PNG files in WP7 but if you want the crispness of vector graphics, go for the XAML version. Of course with XamlTune being open source you could always modify the output of that program to cater it to your app. If you do make a change that’s worthy please consider submitting a patch to the project so everyone can benefit. Hope this helps and happy programming! Resources and Links Sample Project and Icons XamlTune an open source project to convert SVG to XAML The Noun Project source of the original files Jon Galloways post on SVG and XAML StackOverflow question on converting SVG to XAML

  Read the article

• BIP and Mapviewer Mash Up I

  - by Tim Dexter

  I was out in Yellowstone last week soaking up various wildlife and a bit too much rain ... good to be back until the 95F heat yesterday. Taking a little break from the Excel templates; the dev folks are planing an Excel patch in the next week or so that will add a mass of new functionality. At the risk of completely mis leading you I'm going to hang back a while. What I have written so far holds true and will continue to do so. This week, I have been mostly eating 'mapviewer' ... answers on a post card please, TV show and character. I had a request to show how BIP can call mapviewer and render a dynamic map in an output. So I hit the books and colleagues for some answers. Mapviewer is Oracle's geographic information system, hereby known as GIS. I use it a lot in our BIEE demos where the interaction with the maps is very impressive. Need a map of California and its congressional districts? I have contacts; Jerry and David with their little black box of maps. Once in my possession I can build highly interactive, clickable maps that allow the user to drill into more information using a very friendly interface driving BIEE content and navigation. But what about maps in BIP output? Bryan Wise, who has written some articles on this blog did some work a while back with the PL/SQL API interface. The extract for the report called a function that in turn called the mapviewer server, passing a set of mapping requirements, it then returned a URL to a cached copy of that map. Easy to then have BIP render that image. Thats still very doable. You need to install a couple of packages and then load the mapviewer java APIs into the database. Then you can write your function to the APIs. A little involved? Maybe, but the database is doing all the heavy lifting for you. I thought I would investigate another method for getting the maps back into BIP. There is a URL interface you can call, this involves building an XML message to be passed to the mapviewer server. It's pretty straightforward to use on the mapviewer side. On the BIP side things are little more tricksy. After some unexpected messing about I finally got the ubiquitous Hello World map to render using the URL method. Not the most exciting map in the world, lots of ocean and a rather long URL to get it to render. http://127.0.0.1:9704/mapviewer/omserver?xml_request=%3Cmap_request%20title=%22Hello%20World%22%20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E Notice all of the encoding in the URL string to handle the spaces, quotes, etc. All necessary to get BIP to make the call to the mapviewer server correctly without truncating the URL if it hits a real space rather than a %20. With that in mind constructing the URL was pretty simple. I'm not going to get into the content of the URL too much, for that you need to bone up on the mapviewer XML API. Check out the home page here and the documentation here. To make the template portable I used the standard CURRENT_SERVER_URL parameter from the BIP server and declared that in my template. <?param@begin:CURRENT_SERVER_URL;'myserver'?> Ignore the 'myserver', that was just a dummy value for testing at runtime it will resolve to: 'http://yourserver:port/xmlpserver' Not quite what we need as mapviewer has its own server path, in my case I needed 'mapviewer/omserver?xml_request=' as the fixed path to the mapviewer request URL. A little concatenation and substringing later I came up with <?param@begin:mURL;concat(substring($CURRENT_SERVER_URL,1,22),'mapviewer/omserver?xml_request=')?> Thats the basic URL that I can then build on. To get the Hello World map I need to add the following: <map_request title="Hello World" datasource="cagis" format="GIF_STREAM"/> Those angle brackets were the source of my headache, BIPs XSLT engine was attempting to process them rather than just pass them. Hok Min to the rescue ... again. I owe him lunch when I get out to HQ again! To solve the problem, I needed to escape all the characters and white space and then use native XSL to assign the string to a parameter. <xsl:param xdofo:ctx="begin"name="pXML">%3Cmap_request%20title=%22Hello%20World%22 %20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E</xsl:param> I did not need to assign it to a parameter but I felt that if I were going to do anything more serious than Hello World like plotting points of interest on the map. I would need to dynamically build the URL, so using a set of parameters or variables that I then concatenated would be easier. Now I had the initial server string and the request all I then did was combine the two using a concat: concat($mURL,$pXML) Embedding that into an image tag: <fo:external-graphic src="url({concat($mURL,$pXML)})"/> and I was done. Notice the curly braces to get the concat evaluated prior to the image call. As you will see next time, building the XML message to go onto the URL can get quite complex but I have used it with some data. Ultimately, it would be easier to build an extension to BIP to handle the data to be plotted, it would then build the XML message, call mapviewer and return a URL to the map image for BIP to render. More on that next time ...

  Read the article

• How can I find out where is my code causing GLib-GObject-CRITICAL

  - by michael

  Hi, When I c/c++ application fails with the following CRITICAL, can you please tell me how can I find out where is the code causing the error? I have tried to run it in Debugger, trying to do a 'bt when the program fails. But it does not show where is the code causing the CRITICAL: (process:3155): GLib-GObject-CRITICAL **: /build/buildd/glib2.0-2.22.3/gobject/gtype.c:2458: initialization assertion failed, use IA__g_type_init() prior to this function (process:3155): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed (process:3155): GLib-GObject-CRITICAL **: /build/buildd/glib2.0-2.22.3/gobject/gtype.c:2458: initialization assertion failed, use IA__g_type_init() prior to this function (process:3155): GLib-GObject-CRITICAL **: /build/buildd/glib2.0-2.22.3/gobject/gtype.c:2458: initialization assertion failed, use IA__g_type_init() prior to this function (process:3155): GLib-GObject-CRITICAL **: /build/buildd/glib2.0-2.22.3/gobject/gtype.c:2458: initialization assertion failed, use IA__g_type_init() prior to this function (process:3155): GLib-GObject-CRITICAL **: g_type_add_interface_static: assertion `G_TYPE_IS_INSTANTIATABLE (instance_type)' failed (process:3155): GLib-GObject-CRITICAL **: /build/buildd/glib2.0-2.22.3/gobject/gtype.c:2458: initialization assertion failed, use IA__g_type_init() prior to this function Thank you.

  Read the article

• How do I select a fixed number of rows for each group?

  - by Maiasaura

  Here is some example data in a mysql table a b distance 15 44 250 94 31 250 30 41 250 6 1 250 95 18 250 72 84 500 14 23 500 55 24 500 95 8 500 59 25 500 40 73 500 65 85 500 32 50 500 31 39 500 22 25 500 37 11 750 98 39 750 15 57 750 9 22 750 14 44 750 69 22 750 62 50 750 89 35 750 67 65 750 74 37 750 52 36 750 66 53 750 82 74 1000 79 22 1000 98 41 1000 How do I query this table such that I get 2 rows per distance selected at random? A successful query will produce something like a b distance 30 41 250 95 18 250 59 25 500 65 85 500 15 57 750 89 35 750 79 22 1000 98 41 1000

  Read the article

• How to read msmq messages (me, not the pc)

  - by illdev

  I want to look inside my queues, the msm console snapin has this property dialog, but it is very difficult to read and the messages which are important to me are encoded and look like this: 3C 3F 78 6D 6C 20 76 65 <?xml ve 72 73 69 6F 6E 3D 22 31 rsion="1 2E 30 22 20 65 6E 63 6F .0" enco 64 69 6E 67 3D 22 75 74 ding="ut 66 2D 38 22 3F 3E 0D 0A f-8"?>.. 3C 65 73 62 3A 6D 65 73 <esb:mes 73 61 67 65 73 20 78 6D sages xm 6C 6E 73 3A 65 73 62 3D lns:esb= 22 68 74 74 70 3A 2F 2F "http:// 73 65 72 76 69 63 65 62 serviceb 75 73 2E 68 69 62 65 72 us.hiber 6E 61 74 69 6E 67 72 68 natingrh ... Anyone knows of a tool that would allow me to see my messages in a bit developer friendly way? A tool for easier administering queues would come handy to (like selecting multiple messages and drag and drop them)

  Read the article

• How to use linux csplit to chop up massive XML file?

  - by Fred

  Hi everyone, I have a gigantic (4GB) XML file that I am currently breaking into chunks with linux "split" function (every 25,000 lines - not by bytes). This usually works great (I end up with about 50 files), except some of the data descriptions have line breaks, and so frequently the chunk files do not have the proper closing tags - and my parser chokes halfway through processing. Example file: (note: normally each "listing" xml node is supposed to be on its own line) <?xml version="1.0" encoding="UTF-8"?> <listings> <listing><date>2009-09-22</date><desc>This is a description WITHOUT line breaks and works fine with split</desc><more_tags>stuff</more_tags></listing> <listing><date>2009-09-22</date><desc>This is a really annoying description field WITH line breaks that screw the split function</desc><more_tags>stuff</more_tags></listing> </listings> Then sometimes my split ends up like <?xml version="1.0" encoding="UTF-8"?> <listings> <listing><date>2009-09-22</date><desc>This is a description WITHOUT line breaks and works fine with split</desc><more_tags>stuff</more_tags></listing> <listing><date>2009-09-22</date><desc>This is a really annoying description field WITH line breaks ... EOF So - I have been reading about "csplit" and it sounds like it might work to solve this issue. I cant seem to get the regular expression right... Basically I want the same output of ~50ish files Something like: *csplit -k myfile.xml '/</listing>/' 25000 {50} Any help would be great Thanks!

  Read the article

• What is the point of the prototype method?

  - by Mild Fuzz

  I am reading through Javascript: The Good Parts, and struggled to get my head around the section on prototypes. After a little google, I came to the conclusion that it is to add properties to objects after the objects declaration. Using this script gleamed from w3schools, I noticed that removing the line adding the prototype property had no effect. So what is the point? //Prototyping function employee(name,jobtitle,born) { this.name=name; this.jobtitle=jobtitle; this.born=born; } var fred=new employee("Fred Flintstone","Caveman",1970); employee.prototype.salary=null; // <--- try removing this line fred.salary=20000; document.write(fred.salary);

  Read the article

• NetworkManager Applet shows no networks

  - by Kkelk

  I am "the friend" referred to in the questions here and here. I decided to come and ask a question myself, as I can still not connect to the wireless network. I downloaded Keryx, as suggested here, and managed to download the necessary package and its dependencies. When I attempted to install the packages on Ubuntu using Keryx, Keryx just closed. Following this, I installed the packages manually using dpkg, and as far as I can tell, this was successful: kieran@ubuntu:~$ cd /host/wifi/Keryx/keryx/projects/Kieran/packages kieran@ubuntu:/host/wifi/Keryx/keryx/projects/Kieran/packages$ sudo dpkg -i *.deb [sudo] password for kieran: Selecting previously deselected package bcmwl-kernel-source. (Reading database ... 118296 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu5_i386.deb) ... Selecting previously deselected package dkms. Unpacking dkms (from dkms_2.1.1.2-3ubuntu1.1_all.deb) ... Selecting previously deselected package fakeroot. Unpacking fakeroot (from fakeroot_1.14.4-1ubuntu1_i386.deb) ... Selecting previously deselected package linux-image. Unpacking linux-image (from linux-image_2.6.35.22.23_i386.deb) ... Selecting previously deselected package menu. Unpacking menu (from menu_2.1.44ubuntu1_i386.deb) ... Selecting previously deselected package patch. Unpacking patch (from patch_2.6-2ubuntu1_i386.deb) ... Setting up fakeroot (1.14.4-1ubuntu1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up linux-image (2.6.35.22.23) ... Setting up menu (2.1.44ubuntu1) ... Setting up patch (2.6-2ubuntu1) ... Processing triggers for man-db ... Setting up dkms (2.1.1.2-3ubuntu1.1) ... Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu5) ... Loading new bcmwl-5.60.48.36+bdcom DKMS files... First Installation: checking all kernels... Building only for 2.6.35-22-generic Building for architecture i686 Building initial module for 2.6.35-22-generic Done. wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/2.6.35-22-generic/updates/dkms/ depmod..... DKMS: install Completed. update-initramfs: deferring update (trigger activated) Processing triggers for install-info ... Processing triggers for doc-base ... Processing 31 changed 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for menu ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.35-22-generic Warning: No support for locale: en_GB.utf8 After rebooting, however, there were still no wireless networks in the NetworkManager Applet list. I opened the file /var/lib/NetworkManager/NetworkManager.state, and both NetworkEnabled and WirelessEnabled were set to True. While i'm very concious I may be asking a stupid question here, both my friend and I have nothing left to suggest, and as such - I would be very grateful for any answers as to how to get wireless working.

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >