Search Results

Search found 32102 results on 1285 pages for 'local network'.

Page 13/1285 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Are there any tests I can run on a network to simulate 100 heavy network users?

  - by marc.gayle

  I will be hosting a Ruby on Rails workshop at a small hotel in the near future, and while they have 'Wifi' everywhere on the property, and the property normally hosts 150 - 300 people, I am not 100% confident that they have hosted 150 tech people that tend to have heavy web surfing habits/needs. Their tech department is also 1 or 2 guys. Are there any automated tests I can download and run from my laptop, on the network, that would simulate 100 'heavy users' on the network at the same time? Their broadband pipe is a 15mbps cable connection. Would that suffice for the general surfing needs of 100 - 150 techies? I know all it takes is 1 or 2 bit torrenters to kill the entire network, but assuming we can at the very least block those ports or encourage the attendees not to file share on the network, would that speed suffice for general surfing needs? What are good resources online that would allow me to quickly get up to speed on the IT related issues, so that I can ask their sysadmins the right questions? Edit: Note that I am fairly technical, so assume I can get up to speed quickly even with technical manuals, etc.

  Read the article

• Unusable network, packet losses between router and NIC

  - by KáGé

  I have this setup: Gigabyte P35-DS3P motherboard Asus NX1101 PCI network card (the one on the motherboard got fried a few years ago by a power surge) Asus RT-N16 router Windows 7 x64 I think the other specs are irrelevant here, but I'll post them if you say so. Until a week ago everything was fine, but then my network became unusable: websites start loading but timeout before anything would come through (true for the web interface of the router as well), I can't reach the computer from my notebook and Windows' ping utility measures a ~50% packet loss between the computer and the router. Pinging localhost is good. The router works completely fine when wired to my notebook. I also tested different ports on the router, different cables, different router and connecting directly to the modem, but it's still the same. Sometimes it works for a few minutes right after turning on the machine, but then it becomes crap again, but mostly it's useless from the start. I've tried updating the firmware on the router, updating the driver for the network card (after which I started getting BSoDs in every 15 minutes), reinstalling Windows, swapping to Fedora 15 but none of them changed anything. Does this mean that the network card is dying, or could it be something else? If it's the card, what model do you recommend as a replacement? (Could be PCI or PCI-Ex x1) Thanks for your help.

  Read the article

• Local Network - Windows 7 and Vista can't see each other

  - by ca8msm

  I've got a strange issue at home that has been bugging me for weeks, but I really need to get it sorted now so I'll detail as much as I can and hopefully someone can spot what might might be wrong. I have a wireless router connected to the internet and 3 devices connected to it. They are: Name OS Network IPv4 PC1 Windows 7 WORKGROUP 192.168.2.2 LAPTOP1 Vista WORKGROUP 192.168.2.3 PS3 192.168.2.4 and they all get their IP addresses dynamically. Both PC1 and LAPTOP1 can ping PS3 and get a response. PC1 and LAPTOP1 are unable to ping each other by ip address unless I ping by their name (which bizarrely shows that it is pinging via the IPv6 address). Also, to confirm this both PC1 and LAPTOP1 can ping each other via the long IPv6 address that they both have so they can obviously see each other just not via IPv4. I've disabled the firewalls on both machines as well to rule that out. I don't really know what IPv6 is used for and I've tried disabling it on both machines but all that happens then is that neither machine can see each other at all then. Does anyone have any idea of what may be stopping them seeing each other, any ways I can look at fixing this, or any network tools that may help identify where it is failing? Thanks, Mark

  Read the article

• What are local and global variables?

  - by princy

  What are local and global variables?

  Read the article

• XAML support for local-name() in XPath

  - by emddudley

  I'd like to bind to the element name of a node in my XmlDataProvider. I can't seem to get local-name() to work within my XPath expression. Does XAML support local-name()? <TextBlock Text="{Binding XPath=local-name()}" />

  Read the article

• Help ! Flex Local connection

  - by jonny

  Hi all , i was building an application that use local connection and listens to another application that also uses local connection , the second application is sort of remote control for the first app. it invokes function of the listening app from outside. anyway , everything works good on local host. BUT once i have put the listening app on a server and try to work it , it does not connect anymore. any idea's? Thanks

  Read the article

• Start script on network connect

  - by Nate Mara

  I am trying to get a GNU/Linux Bash script to run as soon as a network connection is established on my Raspberry Pi. I tried following the instructions on several pages: I have tried adding my script to /etc/network/if-up.d and running sudo chmod ugo+x on the file. I have tried adding the line post-up <path/to/script.sh> to /etc/network/interfaces I am really quite clueless here. More info: The script runs fine when manually run, here it is: http://pastebin.com/UJvt5HYU (I did remove my personal info (email addresses, passwords), but other than that, the script is unchanged. This script also uses the sendEmail program (can be found at http://caspian.dotconf.net/menu/Software/SendEmail/).

  Read the article

• Viewing CHM Files Across The Network in Windows 7

  - by Lukas Cenovsky

  When I try to open .chm help from a network shared drive I receive the following error: Navigation to the webpage was canceled. I know about the .reg solution described on KB896054 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions] "MaxAllowedZone"=dword:00000001 but it does not work in Windows 7. Any ideas how to make .chm help available from the network drives? Edit: I have the network path mapped to P: drive letter. My program runs from P: and I want to see the help for it. Copying the program to local drive is not a solution for me.

  Read the article

• network timeout how to analyse problem

  - by elhombre

  In the last three month I was experiencing that my internet connection started to get very slow and websites had long time to load. The first thing I made was an ping to www.google.com which showed that I was loosing pakets. Here some of the results: 64 bytes from 74.125.39.103: icmp_seq=2909 ttl=53 time=48.222 ms Request timeout for icmp_seq 2910 Request timeout for icmp_seq 2911 64 bytes from 74.125.39.103: icmp_seq=2912 ttl=53 time=44.372 ms Days later I had to reset my router because it wasn't able to establish a correct network connection. It was after the reset when things worked again for some days. But later the same network timeouts started to happen again. I would like to know how I can analyze the problem to get to the source which is causing this timeouts. Which steps do you take to circle in this Problem? My Network Laptop - Wireless Router modem - ISP EDIT: I am on a Mac OS X 10.6

  Read the article

• Auto-detect proxy settings on network

  - by Ali Lown

  I am having problems trying to run web browser software on the local network through the proxy. When running off the profile drive which is on a network share, the system is unable to auto-detect proxy settings. When running off the local C drive, the browsers are able to correctly autodetect the settings. The error from the browser is about it being unable to fetch the proxy configuration file. Is this some form of authentication preventing it retreiving the settings when running of the network location? PS. Would this be better off on superuser?

  Read the article

• Using Zebra LP 2844-Z over the network

  - by Jason Kealey

  Hello, I am looking for a network-based label printer. I am looking at this Zebra LP-2844-Z printer. Unfortunately, it does not come with a network interface like the lower-end LP 2824 Plus. The ZebraNet 10/100 Print Server is both expensive for what it does (~$600) and only seems to support wireless networking, not wired. I prefer wired for reliability. Questions: Can I use a cheaper off-the-shelf print server to turn the LP-2844Z to a network printer. Would I get any trouble communicating with the printer via its own programming language or via OPOS? (instead of the Windows driver) Are cheaper print servers reliable? Would I be better to get another printer model that has it built in directly to avoid having issues due to the print server? What other printer would you recommend?

  Read the article

• an unknown ip on network

  - by Ahmed safan

  In our office we have many PCs, all of them have static IP addresses. We had a problem with one server with ip 192.168.1.10 dropping off the network occasionally. I unplugged the network cable from the server and from pinged 192.168.1.10 from another host and there was a response. I searched all PCs to see if any has such ip but i didn't found a one. I changed the server ip to fix the problem, but I still find this rogue device using 192.168.1.10 on the network -- how can I figure out what it is? Could it be the ip of virtual machine on someone's PC?

  Read the article

• Windows 7 loses access to network drives

  - by dubRun

  Ok this is an odd one, but is happening often enough its getting quite annoying. I recently installed Windows 7 on my work computer (about 2 months ago) and every so often I lose access to network shares on our work network. Its one server in particular - other shares are still working fine. I have a number of folders mapped as a drive, and all of the ones on a particular file server have lost access. If I try to access the machine directly (\fileserver\d$) it doesn't work either with this message: Windows cannot access \fileserver\d$. You do not have permission to access \fileserver\d$. Contact your network administrator to request access Once I reboot the computer, access is restored like it should be. The computers are all on a domain and my user has administrator level access to the server in question.

  Read the article

• Creating a Network link between 2 buildings

  - by Adam

  Hey My company needs to create a network link between two buildings. Currently we have a cat5e network in one building and would like to connect some computers(about 15) in our second building to the main network in the first building. The distance between the two buildings is 30 metres. The 30 metres means going through a wall from the first building. Going through the car park and then through a wall into the other building. We can run any cables through speed ramps and so we do not need to dig up the road! Also the second building does not have an Internet connection and so we have to create some sort of cable link so that they can share our Internet connection. Ideas? Should we just run cat5e? Should we run fibre? Should we run coaxial?

  Read the article

• Hide network shared folder contents from users view

  - by user1157977

  I have this folder which i need to share it out on the network to facilitate patching from another pc but yet i want to prevent users from viewing the contents of the folder, is there any solutions for this? if i hide the folder and share it out on the network, i realized that when the user do a //192.168.x.x/ from another pc , the folder contents will still be visible even if its hidden. What i wanted to achieve is that the user will be able to access folder thru the network but not able to see any files within the folder (meaning he shd see a empty folder). Is it possible???

  Read the article

• Shared login in a computer network?

  - by Donald

  Hi, I need to understand how a network works: Several PCs running Windows XP One server The PCs are all network connected, as well as the server. Each computer share the logins. I need to understand what happens if I take off the server. Can I still login in each PC? Is the username:passwords on the server or in each computer? My final goal is to take off the server from the network and I need to know what is the server doing. What can he be doing? Thanks.

  Read the article

• Persistent network share connection not working with runas

  - by binarycoder

  If I use runas /user:DOMAIN\user cmd.exe (using XP), previously mapped persistent network drives are considered unavailable. net use shows: Status Local Remote Network ------------------------------------------------------------------------------- Unavailable H: \\SERVER\SHARE Microsoft Windows Network dir H: fails with "The system cannot find the path specified.". The connection is easily revived with `NET USE H: \SERVER\SHARE': not asked for a password when I do this. What is going on? Can I make Windows safely revive this drive automatically when it is first accessed.

  Read the article

• Basic questions about network topologies

  - by laoshanlung

  I have just started learning about network topologies, but there are a lot of confusion about different types of network topologies i have learnt so far. First of all, BUS topology. If i have like 100 PCs in the same wire connected using BUS topology, and the network connection speed is 100Mbps, then each PC will have a connection of 1Mbps, right ? With the same scenario, if i connect those 100 PCs using STAR topology, then each PC will have a connection of 100Mbps ? Then with the TREE topology, i divide the system into 10 sub-system (10 tree branches) , each branch has 10 PCs, then i will have other 10 small "BUS-topology" networks each one will have a connection of 10Mbps and therefore each PC will also have 10Mbps ? And the last one is RING topology, 100 PCs, each PC will have 100Mbps connection ?

  Read the article

• Windows printing: printer works locally, but over network it can't find driver

  - by JudahGabriel

  A friend has a Epson Stylus RX500 printer. She wants to share it between her WinXP desktop and her Win7 laptop. The printer is connected direct to her WinXP desktop, and she can print fine from there. But the Win7 laptop can't print -- it can see the shared printer on the network, but it can't find a driver for it. (And looking on the web, I don't see any Win7 drivers for it.) However, if I connect the printer directly to the Win7 laptop, it works, it can print. This suggests that there is a driver for it, but for some reason, it can't find a driver when connecting to the printer over the network. My question is: if a printer works when connected directly to the machine, should it still work over the local network?

  Read the article

• Advise on a 240,000 sqft outdoor wireless network

  - by whlspacedude

  I would be very appreciative of some advice in the purchase of equipment to provide a wireless network that covers the entire area of an outdoor arena. The area is rectangular-ish in shape. 400ft wide and 600ft long. It has 6 light towers, 1 on each of the 400 foot ends and 2 on each of the 600 foot ends. I can mount on anything and spend as much money as needed. The needs of the network would be to provide access for, up to 15 wireless HD cameras with audio, and a public-wifi network. Can someone point me in the right direction as far as equipment and antennas ? I can provide any additional information that you may need.

  Read the article

• Dropbox style folder for network drives

  - by Toby Allen

  Does anyone know of a third party (or even windows native) solution to this simple problem. I want to map an internal network share on our windows server to a folder on each of the client machines in the network. I dont want to have to use Drive Letters I would just like to set up a Folder on my C drive that is actually a windows share eg C:\DATA\Network Docs is actuallyp pointing to \\Server\SharedData\ Is this possible? Is there a third party solution that does it? All clients are Windows XP and Windows 7.

  Read the article

• Recommendations: Good Network MFP Printer/Scanner

  - by Joeme

  Hi, We have a small office that is expanding. At the moment we have 1x HP J6424 MFP, shared using it's built in network port. It is now becoming a headache, we have daily problems with people not being able to print or scan, and jobs just sitting in the queue. Or the scanner not being detected. Sometimes people can print but not scan, sometimes scan but not print, sometimes a bit of both. We are also pretty much constantly printing or scanning, or trying to! I would like to get a laser MFP (mono is fine) which works well for scanning a printing over the network with multiple users. Althernativly any recommendations for network scanners (sheet feed and or duplex a bonus). Clients are Windows 7 and Mac. Thanks very much!

  Read the article

• Share files - Ubuntu 12.4 and Windows 7 - one network - password not accepted

  - by gotqn

  I have three machines - two with windows 7 and one with Ubuntu 12.4 version. There are in the same network connected by modem. The two machines shares file with no problem, but they can not see the machine with Ubuntu. On the other hand, I am able to see the share files of the windows machines from the Ubuntu's Network. When I select a folder, it wants the network password - I changed it several times in order to be sure that I am entering the correct one but in every case it says that the password is wrong. I have read some topics about files sharing between Linux and windows in which it is said that I should use samba, but is there a more easy way to do this, using the build it options?

  Read the article

• Applications starts very slowly from a network path

  - by Snowfox

  Hi We have a windows 2008 server which hosts the network share \\srvcompany\lib. This share contains several applications needed for the daily business. Every client/user (all win xp) has shortcuts on the desktop to these apps. We have the problem that at several (but not all) clients the apps starts very slowly. If I copy the application's programm files to a local folder then they'll start fastly. When I watch the memory usage in the task manager on such a "slow" machine while an applications starts I notice that the memory usage grows much slowier than when I start the app from a "fast" machine. But when I copy files with Windows Explorer from this share, the speed is nearly the same. I've also checked the network driver, both tested clients have the same network card with the same driver version. Has anyone an idea where or what I should check next to solve this problem? Thanks for answers.

  Read the article

• Network share not always available

  - by CapSoft

  Hello everybody, we have a windows 2003 server with a shared directory. I've seen this thread but this wasn't any help: http://superuser.com/questions/58890/the-specified-network-name-is-no-longer-available I have a ping -t running from 3 pc's (vista and two windows 7) they all work. the things appear when two users enter the network share then this 'network share is no longer available' appears and the explorer windows turn white. after f5 or refresh the shared directory is back. this is really strange. there is no anti virus or kasparsky running on either end. this is all in a LAN. the internet connection is really stable, so it's really strange can it be a router issue? I have checked the eventlog on the server for diskfailure related messages, but there are none.

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >