Search Results

Search found 2742 results on 110 pages for 'paypal gateway'.

Page 13/110 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • Ubuntu 12.04 Server ping gateway responds with destination host unreachable

    - by blckblttkd
    I consider myself fairly avid with Ubuntu and Linux, but this one has me stumped. I built up a Xen Server using Ubuntu 12.04 as the base operating system. It has multiple domUs running on it. My home network has a statically defined network where I got all the network connectivity going peachy. The server was moved to a permanent home this morning. So, the network configuration on the main system had to change. Again, another static network, but now I can't ping the upstream gateway from the host. As the VMs use this NIC over a bridge, they too are broken. Ping responds with "destination host unreachable." I simplified the networking down to a simple static network as seen below (no bridge or anything) just to get it to work. Here's the contents of my /etc/network/interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 216.7.188.228 gateway 216.7.188.225 netmask 255.255.255.240 broadcast 216.7.188.255 network 216.7.188.0 dns-nameservers 8.8.8.8 8.8.4.4 Here's the contents of route -n 0.0.0.0 216.7.188.225 0.0.0.0 UG 100 0 0 eth0 216.7.188.224 0.0.0.0 255.255.255.240 U 0 0 0 eth0 And the results of pinging the gateway: PING 216.7.188.225 (216.7.188.225) 56(84) bytes of data. From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable From 216.7.188.228 icmp_seq=1 Destination Host Unreachable Again, this worked in one network flawlessly (obviously with different parameters in the interfaces file). I did try using eth1 (as there are two NICS on the server (in case the MAC address got flipped on bootup). No success there. Yes, the cable is in the right port now :) Any thoughts? I appreciate the help!

    Read the article

  • There's IP but can't reach gateway

    - by icky
    I have just installed ubuntu 12.04 on my new laptop, and brought it back to home, but I found the wireless network does not work. Strangely, it has the correct ip, but can't connect to the gateway. ifconfig gives ip 192.168.64.36, with broadcast 192.168.79.255 and mask 255.255.240.0, this are all correct, the gateway is at 192.168.64.1 cat /etc/resolv.conf nameserver 192.168.64.1 nameserver 127.0.0.1 which i think it's also right. but when I ping 192.168.64.1, all packages are lost. Please help me with this, I really do not know what happened to my network settings. Huckle, Thank you for your reply ifconfig wlan0 Link encap:Ethernet Hwaddr 88:f9:af:2a:ca:1b inet addr:192.168.64.36 Bcast:192.168.79.255 Mask:255.255.240.0 inet6 addr: fe80::8a9f:faff:fea2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3950 TX byetes:60288 iwconfig wlan0 IEEE 802.11bgn ESSID:"Chiono" Mode:Managed Frequency:2.417 GHz Access Point: 82:54:99:94:6D:43 Bit Rate=13.5 Mb/s Tx-Power=13 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal Level=-32 dBm Rx invalid nwid:0 Rx invalid crypt:0 RX invalid frag:0 Tx excessive retries: 9 Invalid misc:10 Missed beacon:0 route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.64.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.64.0 * 255.255.240.0 U 2 0 0 0 wlan0 Thank you very much

    Read the article

  • June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions)

    - by Oracle_EBS
    For June 2012 we have scheduled a Webcast about the SOA Gateway Implementation and Troubleshooting, presented by 2 experienced Support Engineers located in Romania. As every time we are driving 2 sessions for a better global alignment : EBS - SOA Gateway Overview and Troubleshooting Agenda     Introduction of the SOA Gateway     Architecture Overview     Major Components     Troubleshooting     References EMEA Session : June 12, 2012 at 10:00 am CET / 14:30 India / 18:00 Japan / 20:00 Australia Details & Registration : Note 1455681.1 US Session : June 13, 2012 at 19:00 am CET / 10:00 am Pacific / 11:00 am Mountain/ 01:00 pm Eastern Details & Registration : Note 1455661.1 Schedules, recordings and the Presentations of the Advisor Webcast drove under the EBS Applications Technology area can be found in Note 1186338.1. Schedules, recordings and the Presentations of the Advisor Webcast drove under the EBS Applications Technology area can be found in Note 1186338.1. Current Schedules of Advisor Webcast for all Oracle Products can be found on Note 740966.1 Post Presentation Recordings of the Advisor Webcasts for all Oracle Products can be found on Note 740964.1 If you have any question about the schedules or if you have a suggestion for an Advisor Webcast to be planned in future, please send an E-Mail to Ruediger Ziegler.

    Read the article

  • API-based solutions for sending payments to people without bank accounts

    - by Tauren
    I'm looking for inexpensive ways to send payments to hundreds or thousands of individual contractors, even if they do not have a bank account. Currently I only need to support payment in the USA, but may eventually be international. Here's the scenario: I offer a service that allows an organization or manager-type person to coordinate contractors for very short term jobs. These jobs are typically only an hour or two in length. A contractor may get only one job over an entire month, several jobs spread out over a month, multiple jobs on a single day, or any other combination. Thus, a single contractor could earn as little as one job's payment up to potentially payment for dozens. Payment for a month could be as little as $10 up to $1000's. Right now, the system provides payroll reports to the manager and it is the manager's responsibility to produce checks, stuff envelopes, and send mail via the US postal service. I'd like to remove this burden from the manager and have all the payments taken care of for them automatically by the system. I'm not sure where to start or what the best options would be. I'm starting to look into the following solutions, but don't know specifics yet and would like some advice before pursuing them. I'd also like to hear about other ideas or suggestions. PayPal (Send Money, Adaptive Payments, x.com, other???) Amazon (Flexible Payments System?) Fund some sort of pre-paid debit card? Web service with API that mails checks for you? Direct deposit via a bank API (for users with bank accounts)? The problem is that many of these contractors may not be able to obtain bank accounts or credit cards within the USA. I don't mind doing a hybrid of solutions, but are there any that would work well with this issue? I want the solution to be easy to use for the contractors, meaning that they can get the money easily (via check in the mail, debit card ATM withdrawal, etc.)

    Read the article

  • Why Java servlet can't get Paypal IPN messages everytime ?

    - by Frank
    I have a Java servlet running on my notebook with Windows Vista, I set up a static IP, did port forwarding and registered for a free DDNS service, now my servlet is running, I gave the url to Paypal to send me IPN messages, I went on to it's sandbox site got to the test tools page, tried to send test messages by clicking the "Send IPN" button, most of the time it would fail, the error is : "IPN delivery failed. Unable to connect to the specified URL. Please verify the URL and try again." But maybe 1 in 10 times, it might be successful and my servlet would get the message, and I looked at the messages I got, they are in correct format. So I called Paypal asking why, he said I shouldn't run the servlet on my notebook, in stead I should run it on the web server, but I told him my ISP doesn't support Java on their server, and since I did all the above steps, shouldn't it be the same to run the servlet on my notebook ? He said his test showed he couldn't get to my servlet, but I asked why maybe 1 in 10 times it could get through ? If there is something wrong with running it on my notebook, then 100% times it should fail, am I correct on this point ? But anyway he said that's all he could do, and I should troubleshoot it myself. The servlet looks like this : import java.io.*; import java.net.*; import javax.servlet.*; import javax.servlet.http.*; import java.util.*; public class PayPal_Servlet extends HttpServlet { static boolean Debug=true; static String PayPal_Url="https://www.paypal.com/cgi-bin/webscr",Sandbox_Url="https://www.sandbox.paypal.com/cgi-bin/webscr", Dir_License_Messages="C:/Dir_License_Messages/"; static TransparencyExample Transparency_Example; static PayPal_Message_To_License_File_Worker PayPal_message_to_license_file_worker; // Initializes the servlet. public void init(ServletConfig config) throws ServletException { super.init(config); if (!new File(Dir_License_Messages).exists()) new File(Dir_License_Messages).mkdirs(); System.gc(); } /** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods. * @param request servlet request * @param response servlet response */ protected void processRequest(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException { // Read post from PayPal system and add 'cmd' Enumeration en=request.getParameterNames(); String str="cmd=_notify-validate"; while (en.hasMoreElements()) { String paramName=(String)en.nextElement(); String paramValue=request.getParameter(paramName); str=str+"&"+paramName+"="+URLEncoder.encode(paramValue); } // Post back to PayPal system to validate // NOTE: change http: to https: in the following URL to verify using SSL (for increased security). // using HTTPS requires either Java 1.4 or greater, or Java Secure Socket Extension (JSSE) and configured for older versions. URL u=new URL(Debug?Sandbox_Url:PayPal_Url); URLConnection uc=u.openConnection(); uc.setDoOutput(true); uc.setRequestProperty("Content-Type","application/x-www-form-urlencoded"); PrintWriter pw=new PrintWriter(uc.getOutputStream()); pw.println(str); pw.close(); BufferedReader in=new BufferedReader(new InputStreamReader(uc.getInputStream())); String res=in.readLine(); in.close(); // Assign posted variables to local variables String itemName=request.getParameter("item_name"); String itemNumber=request.getParameter("item_number"); String paymentStatus=request.getParameter("payment_status"); String paymentAmount=request.getParameter("mc_gross"); String paymentCurrency=request.getParameter("mc_currency"); String txnId=request.getParameter("txn_id"); String receiverEmail=request.getParameter("receiver_email"); String payerEmail=request.getParameter("payer_email"); if (res.equals("VERIFIED")) // Check notification validation { // check that paymentStatus=Completed // check that txnId has not been previously processed // check that receiverEmail is your Primary PayPal email // check that paymentAmount/paymentCurrency are correct // process payment } else if (res.equals("INVALID")) // Log for investigation { } else // Log for error { } // =========================================================================== if (txnId!=null) { Write_File_Safe_Fast(Dir_License_Messages+txnId+".txt",new StringBuffer(str.replace("&","\n")),false); } // =========================================================================== String Message_File_List[]=Tool_Lib.Get_File_List_From_Dir(Dir_License_Messages); response.setContentType("text/html"); PrintWriter out=response.getWriter(); String title="Reading All Request Parameters",Name="",Value; out.println("<Html><Head><Title>"+title+"</Title></Head>\n<Body Bgcolor=\"#FDF5E6\">\n<H1 Align=Center>"+title+"</H1>\n"+ "<Table Border=1 Align=Center>\n"+"<Tr Bgcolor=\"#FFAD00\"><Th>Parameter Name</Th><Th>Parameter Value(s) Messages = "+Message_File_List.length+"</Th></Tr>"); Enumeration paramNames=request.getParameterNames(); while(paramNames.hasMoreElements()) { String paramName=(String)paramNames.nextElement(); out.print("<Tr><Td>"+paramName+"</Td><Td>"); String[] paramValues=request.getParameterValues(paramName); if (paramValues.length == 1) { String paramValue=paramValues[0]; if (paramValue.length() == 0) out.print("<I>No Value</I>"); else { out.println(paramValue+"</Td></Tr>"); // Out("paramName = "+paramName+" paramValue = "+paramValue); // if (paramName.startsWith("Name")) Name=paramValue; // else if (paramName.startsWith("Value")) Write_File_Safe_Fast("C:/Dir_Data/"+Name,new StringBuffer(paramValue),false); } } else { out.println("<Ul>"); for (int i=0;i<paramValues.length;i++) out.println("<Li>"+paramValues[i]); out.println("</Ul></Td</Tr>"); } } out.println("</Table>\n</Body></Html>"); } /** Handles the HTTP <code>GET</code> method. * @param request servlet request * @param response servlet response */ protected void doGet(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException { processRequest(request,response); } /** Handles the HTTP <code>POST</code> method. * @param request servlet request * @param response servlet response */ protected void doPost(HttpServletRequest request,HttpServletResponse response) throws ServletException,IOException { processRequest(request,response); } // Returns a short description of the servlet. public String getServletInfo() { return "Short description"; } // Destroys the servlet. public void destroy() { System.gc(); } public static void Write_File_Safe_Fast(String File_Path,StringBuffer Str_Buf,boolean Append) { FileOutputStream fos=null; BufferedOutputStream bos=null; try { fos=new FileOutputStream(File_Path,Append); bos=new BufferedOutputStream(fos); for (int j=0;j<Str_Buf.length();j++) bos.write(Str_Buf.charAt(j)); } catch (Exception e) { e.printStackTrace(); } finally { try { if (bos!=null) { bos.close(); bos=null; } if (fos!=null) { fos.close(); fos=null; } } catch (Exception ex) { ex.printStackTrace(); } } System.gc(); } } I use Netbean6.7 to develop the servlet, and the code was from Paypal's JSP sample code, what can I do to debug the problem ?

    Read the article

  • What is a SIP 'Gateway' and how is different from a SIP Proxy/Registrar?

    - by Shrey
    Recently I started looking at SIP implementation for a future work. I was reading (Googling) about what SIP means and how to go about implementing a end-to-end SIP enabled VoIP network. What I did not get is what use does a SIP Gateway is for? How different is it with respect to SIP proxy servers or a SIP DNS/Locator like server? I understand probably QoS would be one primary factor - like dedicating a set bandwidth for SIP/VoIP specific I/O over a network. Anything else? Can anyone help me with any other hints/pointers? I fully understand that is quite a basic question - but I really couldn't find any text which could clear my doubt about what 'Gateway' would mean in SIP context and what differentiates it from other SIP based network components (like Softphones, Proxies etc). Thanks a lot.

    Read the article

  • Gateway IP Returns to Zero

    - by Robert Smith
    When you set a static IP under Ubuntu 12.04.1, you must supply the desired machine IP and the gateway IP, all using the Network Manager. When I first entered them and rebooted, everything worked great. On the second boot, however, Firefox could find no Web page. Upon checking, I discovered that the gateway IP had returned to zero. Now, no matter how often I resupply it, it returns to zero immediately after NM "saves" it: that is, appears as zero when redisplayed. The only way I can get to the Internet is to restore DHCP operation. I need to use static IP for access to my home network. Would appreciate any suggestion. --Robert Smith

    Read the article

  • Paypal hide address [closed]

    - by Rob F
    I hope this question is okay for this website, to me it seemed most fitting among the stackexchange sites at least. 8) I want to release my software for free, but allow donations for it. So far, I couldn't find any option in Google Checkout to set up a donation button (and website link). I am registered as merchant, but am still waiting for my bank account verification code, that may be the reason. But then, I guess I will not be able to use it anyway because it seems the 'Donation' functionality requires to be a nonprofit organization. My understanding of 'Donation' seems to be unknown to Google (yet). So unfortunately, the one remaining option is Paypal. However, even having upgraded my account to a business account, I can find no option how to remove my living address from the Checkout pages. Basically I have nothing to hide ;) but feel uncomfortable having my address displayed publicly because of the kind of software I'm offering. We live in a world with crazy people it seems, and I don't want to have nightmares of people knocking on my doors at night. So is there a way to deactivate my address from being displayed on Paypal's checkout pages?

    Read the article

  • How to fix First Data payment gateway issues "unable to load certificate" ?

    - by Krishnan
    Our asp.net team working on Shopping cart projects We have integrated First Data payment gateway for payment process We have included Visa/master card verification using Alternative First Data payment gateway After visa/master card verification we got cavv(secure code), xid, eci values. After getting cavv, xid and eci values we have appended these values to First data payment gateway. We have set the host as "secure.linkpt.net" and port as 1129 and also set the config and pem files. Now we got an error when sending the xml values to payment gateway as given below Unable to load certificate ERRs: wsa=33558530 err=33558530 ssl=537317504 sys=33558530. INFO: ACE_SSL (3260|3384) error code: 33558530 - error:02001002:lib(2):func(1):reason(2) please help our team to fix the issue

    Read the article

  • How do i get the default gateway in LINUX given the destination?

    - by Suezy
    Good day! I'm trying to get the default gateway, using the destination 0.0.0.0 i used this command: netstat -rn | grep 0.0.0.0 and it returns this list: Destination Gateway Genmask Flags MSS Window irtt Iface 10.9.9.17 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 133.88.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 133.88.31.70 0.0.0.0 UG 0 0 0 eth0 My goal here is to ping the default gateway using destination 0.0.0.0; thus, that is "133.88.31.70"; but this one returns a list because of using 'grep'. Question is: How do i get the default gateway only? I will need it for my bash script to identify if net connection is up or not. Any answers will be much appreciated. =)

    Read the article

  • error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure(35)

    - by ArunS
    Hello there, We have online shopping site. When I am going to checkout page i am getting a error like this "error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure(35)" From the apache error log i can see some attempts to connect to api.paypal.com. Here is the part of my apache error log About to connect() to api.paypal.com port 443 (#0) Trying 66.211.168.123... * connected Connected to api.paypal.com (66.211.168.123) port 443 (#0) successfully set certificate verify locations: CAfile: none CApath: /etc/ssl/certs error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure Closing connection #0 When i tried to connect to api.paypal.com using curl i am getting a error like this curl -iv https://api.paypal.com/ * About to connect() to api.paypal.com port 443 (#0) * Trying 66.211.168.91... connected * Connected to api.paypal.com (66.211.168.91) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Request CERT (13): * SSLv3, TLS handshake, Server finished (14): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Client key exchange (16): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSLv3, TLS alert, Server hello (2): * error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure * Closing connection #0 curl: (35) error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure Can anyone help me to figure out this. Thanks in Advance. Arun S

    Read the article

  • OpenVPN on Ubuntu 11.10 - unable to redirect default gateway

    - by Vladimir Kadalashvili
    I'm trying to connect to connect to OpenVPN server from my Ubuntu 11.10 machine. I use the following command to do it (under root user): openvpn --config /home/vladimir/client.ovpn Everything seems to be OK, it connects normally without any warnings and errors, but when I try to browse the internet I see that I still use my own IP address, so VPN connection doesn't work. When I run openvpn command, it displays the following message among others: NOTE: unable to redirect default gateway -- Cannot read current default gateway from system I think it's the cause of this problem, but unfortunately I don't know how to fix it. Below is full output of openvpn command: Sat Jun 9 23:51:36 2012 OpenVPN 2.2.0 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jul 4 2011 Sat Jun 9 23:51:36 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sat Jun 9 23:51:36 2012 Control Channel Authentication: tls-auth using INLINE static key file Sat Jun 9 23:51:36 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 LZO compression initialized Sat Jun 9 23:51:36 2012 Control Channel MTU parms [ L:1542 D:166 EF:66 EB:0 ET:0 EL:0 ] Sat Jun 9 23:51:36 2012 Socket Buffers: R=[126976->200000] S=[126976->200000] Sat Jun 9 23:51:36 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sat Jun 9 23:51:36 2012 Local Options hash (VER=V4): '504e774e' Sat Jun 9 23:51:36 2012 Expected Remote Options hash (VER=V4): '14168603' Sat Jun 9 23:51:36 2012 UDPv4 link local: [undef] Sat Jun 9 23:51:36 2012 UDPv4 link remote: [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:37 2012 TLS: Initial packet from [AF_INET]94.229.78.130:1194, sid=13fd921b b42072ab Sat Jun 9 23:51:37 2012 VERIFY OK: depth=1, /CN=OpenVPN_CA Sat Jun 9 23:51:37 2012 VERIFY OK: nsCertType=SERVER Sat Jun 9 23:51:37 2012 VERIFY OK: depth=0, /CN=OpenVPN_Server Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sat Jun 9 23:51:38 2012 [OpenVPN_Server] Peer Connection Initiated with [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:40 2012 SENT CONTROL [OpenVPN_Server]: 'PUSH_REQUEST' (status=1) Sat Jun 9 23:51:40 2012 PUSH: Received control message: 'PUSH_REPLY,explicit-exit-notify,topology subnet,route-delay 5 30,dhcp-pre-release,dhcp-renew,dhcp-release,route-metric 101,ping 5,ping-restart 40,redirect-gateway def1,redirect-gateway bypass-dhcp,redirect-gateway autolocal,route-gateway 5.5.0.1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,register-dns,comp-lzo yes,ifconfig 5.5.117.43 255.255.0.0' Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:4: dhcp-pre-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:5: dhcp-renew (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:6: dhcp-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:16: register-dns (2.2.0) Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: timers and/or timeouts modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: explicit notify parm(s) modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: LZO parms modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ifconfig/up options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route-related options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sat Jun 9 23:51:40 2012 ROUTE: default_gateway=UNDEF Sat Jun 9 23:51:40 2012 TUN/TAP device tun0 opened Sat Jun 9 23:51:40 2012 TUN/TAP TX queue length set to 100 Sat Jun 9 23:51:40 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Sat Jun 9 23:51:40 2012 /sbin/ifconfig tun0 5.5.117.43 netmask 255.255.0.0 mtu 1500 broadcast 5.5.255.255 Sat Jun 9 23:51:45 2012 NOTE: unable to redirect default gateway -- Cannot read current default gateway from system Sat Jun 9 23:51:45 2012 Initialization Sequence Completed Output of route command: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default * 0.0.0.0 U 0 0 0 ppp0 5.5.0.0 * 255.255.0.0 U 0 0 0 tun0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0 stream-ts1.net. * 255.255.255.255 UH 0 0 0 ppp0 Output of ifconfig command: eth0 Link encap:Ethernet HWaddr 6c:62:6d:44:0d:12 inet6 addr: fe80::6e62:6dff:fe44:d12/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54594 errors:0 dropped:0 overruns:0 frame:0 TX packets:59897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44922107 (44.9 MB) TX bytes:8839969 (8.8 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4561 errors:0 dropped:0 overruns:0 frame:0 TX packets:4561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:685425 (685.4 KB) TX bytes:685425 (685.4 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:213.206.63.44 P-t-P:213.206.34.4 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:53577 errors:0 dropped:0 overruns:0 frame:0 TX packets:58892 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:43667387 (43.6 MB) TX bytes:7504776 (7.5 MB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.117.43 P-t-P:5.5.117.43 Mask:255.255.0.0 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:27:19:f6:b5:cf inet addr:192.168.0.1 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::227:19ff:fef6:b5cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12079 errors:0 dropped:0 overruns:0 frame:0 TX packets:11178 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1483691 (1.4 MB) TX bytes:4307899 (4.3 MB) So my question is - how to make OpenVPN redirect default gateway? Thanks!

    Read the article

  • Why are people trying to connect to me network on TCP port 445?

    - by Solignis
    I was playing with my new syslog server and had my m0n0wall firewall logs forwarded as a test, I noticed a bunch of recent firewall log entries that say that it blocked other WAN IPs from my ISP (I checked) from connecting to me on TCP port 445. Why would a random computer be trying to connect to me on a port apperently used for Windows SMB shares? Just internet garbage? A port scan? I am just curious. here is what I am seeing Mar 15 23:38:41 gateway/gateway ipmon[121]: 23:38:40.614422 fxp0 @0:19 b 98.82.198.238,60653 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:42 gateway/gateway ipmon[121]: 23:38:41.665571 fxp0 @0:19 b 98.82.198.238,60665 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:38:43 gateway/gateway ipmon[121]: 23:38:43.165622 fxp0 @0:19 b 98.82.198.238,60670 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.614524 fxp0 @0:19 b 98.82.198.238,60653 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.808856 fxp0 @0:19 b 98.82.198.238,60665 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.836313 fxp0 @0:19 b 98.82.198.238,60670 -> 98.103.xxx,xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.305633 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN broadcast Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.490778 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.550230 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN broadcast Mar 15 23:43:33 gateway/gateway ipmon[121]: 23:43:33.185836 fxp0 @0:19 b 98.86.34.225,64060 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:43:34 gateway/gateway ipmon[121]: 23:43:33.405137 fxp0 @0:19 b 98.86.34.225,64081 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:43:34 gateway/gateway ipmon[121]: 23:43:33.454384 fxp0 @0:19 b 98.86.34.225,64089 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast I blacked out part of my IP address for my own safety.

    Read the article

  • error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure(35)

    - by ArunS
    We have online shopping site. When I am going to checkout page i am getting a error like this "error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure(35)" From the apache error log i can see some attempts to connect to api.paypal.com. Here is the part of my apache error log * About to connect() to api.paypal.com port 443 (#0) * Trying 66.211.168.123... * connected * Connected to api.paypal.com (66.211.168.123) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure * Closing connection #0 When i tried to connect to api.paypal.com using curl i am getting a error like this curl -iv https://api.paypal.com/ * About to connect() to api.paypal.com port 443 (#0) * Trying 66.211.168.91... connected * Connected to api.paypal.com (66.211.168.91) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * SSLv3, TLS handshake, Client hello (1): * SSLv3, TLS handshake, Server hello (2): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Request CERT (13): * SSLv3, TLS handshake, Server finished (14): * SSLv3, TLS handshake, CERT (11): * SSLv3, TLS handshake, Client key exchange (16): * SSLv3, TLS change cipher, Client hello (1): * SSLv3, TLS handshake, Finished (20): * SSLv3, TLS alert, Server hello (2): * error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure * Closing connection #0 curl: (35) error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure Can anyone help me to figure out this. Thanks in Advance. Arun S

    Read the article

  • Trixbox CentOS Default GW Problem (Multi-homed server)

    - by slashp
    I'm having an issue with a CentOS trixbox server which is dual-homed (one private facing NIC [eth1], one internet-facing NIC [eth0]). I can't seem to get the default gateway to set properly to our ISP's GW via eth0. I've modified the /etc/sysconfig/network to contain both a GATEWAY & GATEWAYDEV line and removed the GATEWAY line from /etc/sysconfig/network-scripts/ifcfg-eth1 (as well as /etc/sysconfig/network-scripts/ifcfg-eth0). No default GW shows up in the routing table unless it's specified in the ifcfg-eth1 file (which both the wrong interface and wrong gateway IP), otherwise, the routing table simply does not contain a default gateway..any ideas would be greatly appreciated! Thanks! EDIT Just realized when attempting to add the default gateway manually using the route add command, I receive an error stating: SIOCADDRT: Network is unreachable I know this error can occur when your default gateway and interface IP address are not on the same subnet..in this case, my public IP address of eth0 is a /29.

    Read the article

  • Python: Getting INVALID response from PayPal's Sandbox IPN, slowly going insane...

    - by thepeanut
    Hi All I am trying to implement a simple online payment system using PayPal, however I have tried everything I know and am still getting an INVALID response. I know it's nothing too simple, because I get a VERIFIED response when using the IPN simulator. I have tried putting the items into a dict first, I have tried fixing the encoding, and still nothing. PayPal says the reasons for an INVALID response could be: Sending wrong items or in wrong order (pretty sure it's not this) Sending to the wrong address (definitely not this) Encoding items incorrectly (I dont think it's this, set encoding to UTF-8 on both paypal and my script) The following is the snippet concerned: f = cgi.FieldStorage() newparams = 'cmd=_notify-validate' for key in f.keys(): val = f[key].value newparams += '&' + urlencode({key: val.encode('utf-8')}) req = urllib2.Request(PP_URL, newparams) req.add_header("Content-type", "application/x-www-form-urlencoded") http = urllib2.urlopen(req) ret = http.read() fi.write(ret + '\n') if ret == 'VERIFIED': #*do stuff* Can anyone suggest anything I can do to fix this?! Cheers Sam

    Read the article

  • Anyone run recurring payments in their website? Preferably; Paypal API

    - by James
    I'm wrapping up my startup and will need to implement Paypal API into my sign up page. Does anyone use recurring payments via Paypal API integrated into their billing? Better yet, guide me to a trustable developer with experience or will I have to use Elance? I need it to go to a welcome/get started screen in their logged in account once they hit the 'create account' button after filling out billing info. I was also wondering, can you leave the CSC (3 digit security code) field out with integration, because it makes things very hard for recurring payments. I'd like to stick with Paypal, as I have been very satisfied with them for a few years now; I already checked out Chargify, authorize.net, etc. I'd love to see someone with something like this set up already to take a look at and ask a few questions.

    Read the article

  • DHCP server with multiple interfaces on ubuntu, destroys default gateway

    - by Henrik Kjus Alstad
    I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

    Read the article

  • Losing internet connectivity on server after installing LogMeIn Hamachi (with server set as gateway node)

    - by Kim Jong-Un
    Our domain controller (SBS 2003) completely lost internet and network connectivity yesterday after I remotely installed LogMeIn Hamachi on it and set it to be a gateway node- in an attempt to create a VPN link between the server and a remote site. I had to go in to the office to resolve the problem as, unsurprisingly, my own remote access to the server was also lost. I was only able to restore network connectivity by deleting a virtual network adapter Hamachi created when making the server the gateway node (called "Hamachi bridge" I believe), then rebooting the server. This is a repeatable problem. Every time I try to get this to work, it just takes the server offline. Why would this bridge affect regular TCP/IP connectivity on the NIC in this way? I have tried a "hub-and-spoke" configuration between the server and our PC at a remote site (server set as hub, remote site as spoke). This caused no such problems with general internet connectivity, and file transfer worked well between the two computers. However, there was a DNS issue with the VPN between the two sites- resulting in Active Directory not being able to communicate between them (could not log on using domain user accounts at remote site if they were not already cached on that machine). I only tried a "gateway" network as LogMeIn support told me: If you can get the Active Directory to work it would only be through a "Gateway" network type with the server acting as the Gateway Node. You would configure the gateway settings on the server in the Hamachi client on that machine to push whatever IP's/DNS settings you prefer and at that point AD would be able (all things being equal) communicate to the client node when it attaches. We do not have any ActiveDirectory configuration info as that's outside the scope of our support. I hope this helps. It would be fantastic if I could get Active Directory to work over a Hamachi VPN connection, without worrying about the server going offline in this way. Does anyone have any ideas how I should proceed, or any theories as to what is going on when I try to use the "gateway" network type? I want to try to narrow down what is going on here.

    Read the article

  • Is Paypal In-App model for Android legal on Android Market?

    - by sunil
    Hi, As you all might be knowing that Paypal has launched an in-App purchase model for Anroid. I will like to know whether this is legally allowed in Android market or not. I know this may not be the best place to ask this but being developers if anyone has developed an application which uses Paypal In-App and is on Android Market then it would be a great help. Regards Sunil

    Read the article

  • How do I use a virtualbox guest machine as a gateway?

    - by Igor Zinov'yev
    I have a certain problem. I am working on an Ubuntu machine, but I have to use a windows 2003 server guest to connect to a Stonegate VPN to be able to manage our client's website. I have already asked if I could connect to a Stonegate VPN in Ubuntu, but so far got no answer. And I couldn't connect to it using network manager's strongswan plugin. So I want to use my guest Win2003 as a gateway to be able to SSH to the remote server. Is that possible? Thank you very much in advance, if this is possible in any way, it will save me a lot of trouble!

    Read the article

  • Looking for a router-like web interface for my Debian gateway.

    - by marcusw
    Hey, I need a web interface program for my debian gateway which has the features of a router's one. Specifically, I must be able to easily Forward ports to various clients on the LAN or the router itself (it's also a server) Manage a DHCP server preferably including DHCP reservation for certain MACs Give me a list of the connected DHCP clients (optionally) Show which clients are the most active as far as bandwidth (something like iftop) Alternatively, it could be a graphical app which I could tunnel over ssh. No command line programs please...I'm used to doing this stuff with a point-and-click interface. Not adverse to command-line setup; just need to be able to reconfigure things graphically. Have a working LAMP setup. I've tried webmin, but it didn't satisfy the "easy" part...too many clicks and too many meny options.

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >