Search Results

Search found 21 results on 1 pages for 'solignis'.

Page 1/1 | 1 

• Some domain names not resolving on local network

  - by Solignis

  I am not really sure where to start with this one... I have a small network setup with some linux servers (Ubuntu 11.04 Server). 2 servers are running BIND 9 (NS01, NS02), they are configured as master and slave respectively. 1 server is running Zimbra ZCS 7.1.1 (MX01), it has a private BIND 9 server running to achieve a split DNS configuration. This DNS server does not interact with the other two, it forwards queries it can resolve to the other 2 that is it. No zone transfers. Zimbra is hosting 3 domains at the moment, solignis.local, solignis.com, campbellsurvey.net. The problem From with in my network I cannot connect to mail.campbellsurvey.net. When I mean I cannot connect, I mean if I open firefox and type https://mail.campbellsurvey.net I go nowhere, the address is supposed to connect to my Zimbra webmail. But it goes nowhere, the odd thing is if I try the same task from outside of the network it brings the website up like normal. If I try to create an account in thunderbird to connect to the same server using IMAP4 or POP3 I get an error saying that thunderbird cannot find the domain name. Even the zimbra client fails too. It is like from with in my own walls that campbellsurvey.net does not exist. But if step outside I can get it work with no problem at all. I had thought maybe the problem was with the DNS server (BIND 9), so just to eliminate it as a possibility I configured a windows server I use for VMware VCenter as a DNS server to see what would happen. The result was the same, its like something is preventing connections to those domains, but I have checked various firewalls and such. I checked port forwards, etc. So I am running out of ideas I know this is not a lot of information to work from and I can give more details about certain things as needed. I am just trying to figure out what could be going wrong. Any help you could offer would be much appreciated.

  Read the article

• Why will network manager not allow me save my VPN settings?

  - by Solignis

  I am trying to configure am OpenVPN client on my laptop. I am running Ubuntu 11.10 64-bit. When I open network manager and import the VPN settings from the premade config folder everything takes. The problem is when I try to save the settings, the save button at the bottom of the network manager applet is greyed out. Further more when I hover over the button it says Authenticate to save this connection for all users of this machine. The problem is I did not check the box Available to all users it was already checked and it is also greyed out and won't let me manipulate it. What is going on? Is this a bug or is there something I am missing? Any help would be wonderful.

  Read the article

• How would I setup reverse DNS for 2 email servers?

  - by Solignis

  I have an interesting DNS question (well interesting to me atleast). I just installed an hmail server in our remote office to act as an MX backup in the event our exchange server goes down. The 2 host names are mail.campbellsurvey.com mail2.campbellsurvey.com mail points to the address 98.XXX.91.XXX mail2 points to the address 70.XXX.190.XXX How would I setup a PTR record on the ISP end to reflect both hostnames? Does the PTR have to point to EXACTLY mail.campbellsurvey.com or can it point to just campbellsurvey.com? because right now anything passing through the primary static address in our pool (the one used for standard internet) is identified as mail.campbellsurvey.com. My only idea to fix this was to move the mail server to the next available address and give it only it the name mail.campbellsurvey.com but I wanted to see if there was another way. Thanks in advance.

  Read the article

• Why are people trying to connect to me network on TCP port 445?

  - by Solignis

  I was playing with my new syslog server and had my m0n0wall firewall logs forwarded as a test, I noticed a bunch of recent firewall log entries that say that it blocked other WAN IPs from my ISP (I checked) from connecting to me on TCP port 445. Why would a random computer be trying to connect to me on a port apperently used for Windows SMB shares? Just internet garbage? A port scan? I am just curious. here is what I am seeing Mar 15 23:38:41 gateway/gateway ipmon[121]: 23:38:40.614422 fxp0 @0:19 b 98.82.198.238,60653 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:42 gateway/gateway ipmon[121]: 23:38:41.665571 fxp0 @0:19 b 98.82.198.238,60665 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:38:43 gateway/gateway ipmon[121]: 23:38:43.165622 fxp0 @0:19 b 98.82.198.238,60670 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.614524 fxp0 @0:19 b 98.82.198.238,60653 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.808856 fxp0 @0:19 b 98.82.198.238,60665 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:38:44 gateway/gateway ipmon[121]: 23:38:43.836313 fxp0 @0:19 b 98.82.198.238,60670 -> 98.103.xxx,xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.305633 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN broadcast Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.490778 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN Mar 15 23:38:48 gateway/gateway ipmon[121]: 23:38:48.550230 fxp0 @0:19 b 98.103.22.25 -> 98.103.xxx.xxx PR icmp len 20 92 icmp echo/0 IN broadcast Mar 15 23:43:33 gateway/gateway ipmon[121]: 23:43:33.185836 fxp0 @0:19 b 98.86.34.225,64060 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast Mar 15 23:43:34 gateway/gateway ipmon[121]: 23:43:33.405137 fxp0 @0:19 b 98.86.34.225,64081 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN Mar 15 23:43:34 gateway/gateway ipmon[121]: 23:43:33.454384 fxp0 @0:19 b 98.86.34.225,64089 -> 98.103.xxx.xxx,445 PR tcp len 20 48 -S IN broadcast I blacked out part of my IP address for my own safety.

  Read the article

• How can I stop Ubuntu from playing audio from 2 interfaces at the same time?

  - by Solignis

  Hi there, I just loaded Ubuntu 10.10 Maverick on my home machine. The machine is running a Core2Duo E6750 on an MSI motherboard with an Nvidia GTX260-OC Graphics card. The problem I am having as stated in the title is for some reason Ubuntu is playing audio through my headphone coming out from the computer and it is also playing the audio at the exact same time through the HDMI connection coming out of the graphics card, it has a plug to allow this. What is going on, I have never seen this before. Most importantly of all can it be fixed so that I can sepertate the 2 interfaces, the one is a standard PC audio IO and the HDMI one is connected through the mobo's internal SPDIF. More information can be provided if required.

  Read the article

• Setting up a wireless access point with Ubuntu server

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server, everything "seems" to be good since I got a better wifi radio (long story). But now I am a little confused, when my Android phone tries to associate with the AP it is able to with no problem but then it cannot get an IP address from my DHCP server. I have tried messing with firewall rules, nothing... I tried making a bridge interface as per what I am told I had to do. ( Not sure if i did it right though). What I am trying to do if make the wireless interface an extention of my eth0 network. Am I on the right track or am I going about the wrong way?

  Read the article

• Android tethering question

  - by Solignis

  Hi there, I have a Motorola Droid 1 with Android 2.2 on it. I found something odd that I don't understand why it works. If I plug my phone into my home computer which is Windows 7 and I turn on the tethering ability, I am met with a Verizon captive portal and it tells me I need to pay for a tethering plan (which I don't have). Now the weird thing, if I plug the same phone into my Ubuntu 10.10 laptop and enable tethering it works and can get on the internet with no captive portal showing up. The only thing I could notice that was different about the connections was Windows connected to the phone with an NDIS driver and Linux connected to the phone with what I think is a raw device mapping. Would that have anything to do with it?

  Read the article

• Why won't vyatta allow SMTP through my firewall?

  - by Solignis

  I am setting up a vyatta router on VMware ESXi, But I see to have hit a major snag, I could not get my firewall and NAT to work correctly. I am not sure what was wrong with NAT but it "seems" to be working now. But the firewall is not allowing traffic from my WAN interface (eth0) to my LAN (eth1). I can confirm its the firewall because I disabled all firewall rules and everything worked with just NAT. If put the firewalls (WAN and LAN) back in place nothing can get through to port 25. I am not really sure what the issue could be I am using pretty basic firewall rules, I wrote the rules while looking at the vyatta docs so unless there is something odd with the documentation they "should" be working. Here is my NAT rules so far; vyatta@gateway# show service nat rule 20 { description "Zimbra SNAT #1" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.17 } type source } rule 21 { description "Zimbra SMTP #1" destination { address 74.XXX.XXX.XXX port 25 } inbound-interface eth0 inside-address { address 10.0.0.17 } protocol tcp type destination } rule 100 { description "Default LAN -> WAN" outbound-interface eth0 outside-address { address 74.XXX.XXX.XXX } source { address 10.0.0.0/24 } type source } Then here is my firewall rules, this is where I believe the problem is. vyatta@gateway# show firewall all-ping enable broadcast-ping disable conntrack-expect-table-size 4096 conntrack-hash-size 4096 conntrack-table-size 32768 conntrack-tcp-loose enable ipv6-receive-redirects disable ipv6-src-route disable ip-src-route disable log-martians enable name LAN_in { rule 100 { action accept description "Default LAN -> any" protocol all source { address 10.0.0.0/24 } } } name LAN_out { } name LOCAL { rule 100 { action accept state { established enable } } } name WAN_in { rule 20 { action accept description "Allow SMTP connections to MX01" destination { address 74.XXX.XXX.XXX port 25 } protocol tcp } rule 100 { action accept description "Allow established connections back through" state { established enable } } } name WAN_out { } receive-redirects disable send-redirects enable source-validation disable syn-cookies enable SIDENOTE To test for open ports I have using this website, http://www.yougetsignal.com/tools/open-ports/, it showed port 25 as open without the firewall rules and closed with the firewall rules. UPDATE Just to see if the firewall was working properly I made a rule to block SSH from the WAN interface. When I checked for port 22 on my primary WAN address it said it was still open even though I outright blocked the port. Here is the rule I used; rule 21 { action reject destination { address 74.219.80.163 port 22 } protocol tcp } So now I am convinced either I am doing something wrong or the firewall is not working like it should.

  Read the article

• How do I restore a Dell Inspiron 1521 laptop to factory defaults?

  - by Solignis

  I got a Dell Inspiron 1521 laptop from a local computer store that a buddy of mine works at. When I turned it on I had come to realize it has not been wiped and reverted to factory defaults. How can revert the machine to factory defaults? I do not have any of the CDs that came with the machine, all I have is the computer and the power brick. But if it helps any I can able to get into Windows so I full access to the machine.

  Read the article

• Setting a wireless access point on Ubuntu server 11.10

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server. I have managed to get my phone to connect the wireless and now it get a DHCP lease. Though it still cannot ping out or get pinged by anything on my network. I am prety sure my problem is iptables, but I not sure what would be wrong. Here is what my rules look like. (The ones pertaining to the bridge interface) # Allow traffic to / from wireless bridge interface iptables -A INPUT -i br0 -j ACCEPT iptables -A OUTPUT -o br0 -j ACCEPT I am guessing my rules are a little lean, the bridge exists on the same subnet as everything else on my network, I am using a 10.0.0.0/24 subnet. EDIT Oh yeah I should mention also, when I do a ping test, I get Destination Host Unreachable as the error.

  Read the article

• How can I control wireless networks in Ubuntu without Network-Manager?

  - by Solignis

  Hi there, I recently installed Ubuntu on a laptop I got. I was having issues with the network manager just like I was having in my VM where it was not setting up the hostname correctly. Anyhow now I have a problem, since it is a laptop it will be moving.... But I have no way to discover new wireless networks. Anyway I can gain that functionality back? The problem I am running into is that I need to set the DNS search and domain for the machine so I can access my network but the network-manager was overriding the settings. Any help would be much appreciated.

  Read the article

• Restoring openldap configuration from ldif file?

  - by Solignis

  I am trying to restore my OpenLDAP server from an ldif file I made before it went horribly wrong. All of the websites I found talk about using slapadd but when I run slapadd -v -l ~ns01/openldap_config.ldif it returns the error Could not stat config file "/etc/ldap/slapd.conf" : No such file or directory (2) slapadd: bad configuration file! When I look in the directory indeed the file does not exist, but this is because Ubuntu 11.10 is running in RTC mode, my LDAP server uses the /etc/slapd.d/cn=config for the configuration. So? What am I missing? Is slapadd the wrong tool to use? As I said above I running on Ubuntu 11.10 server edition 64-bit.

  Read the article

• How do I setup a syslog server for my network?

  - by Solignis

  I would like to setup a syslog server to forward all log file from all of my VMs and servers. I really don't much about what is out there. So I turn to the community, Something on Linux is fine, what I want more is alert ability like emails telling me something is not right. If there was something to sort the logs by source that would be cool. Where would I want run the syslog server from? My admin WS or a server/VM? Any input would be wonderful. Thanks in advance.

  Read the article

• How do I restore a Dell Inspiron 1521 laptop to facotry defaults

  - by Solignis

  I got a Dell Inspiron 1521 laptop from the local computer store, it is obviously a used machine. When I got it the data from the previous user was on it they did not do a wipe. Anyhow Dell was not being any help to me on wiping the data. Does anyone know how I get the machine to restore Windows to the factory settings. Also I do not have the system disc that come with the computer, I just have the computer and the power cord.

  Read the article

• How can I repair a Windows 7 Bootloader without a Window 7 Disc?

  - by Solignis

  I have a bit of a problem, I got my boss's laptop next to me and it won't boot. He told me it had hard crashed so he... you are going to love this... removed the battery. So when it put it back in and turned on the machine it gets past POST ("The Toshiba Screen") but I just get a flashing white prompt then it disappears and sits there. I don't have the original CDs. What can I do? I do have an Ubuntu CD and a few other Linux CDs like Gparted and Clonezilla. Is there anything I can do?

  Read the article

• What is the easiest way to make a backup of an entire hard disk

  - by Solignis

  Hi there, I got myself a dell laptop from the local computer store. Its a used machine with Windows Vista Home Basic on it. I want to load Ubuntu Desktop 10.10 though so I can do perl development. BUT I want to keep a copy of the entire harddrive with the dell utility partition and Windows Vista in case I want to go back. I was thinking I could image the drive but I not sure what to use, I don't have Ghost or anything, Someone had told me about Clonezilla. Would that work for me? Is it hard to use? Also I want to burn the data to a DVD or something more storable than a harddisk.

  Read the article

• What is the easiest way to make a backup of an entire hard disk

  - by Solignis

  Hi there, I got myself a dell laptop from the local computer store. Its a used machine with Windows Vista Home Basic on it. I want to load Ubuntu Desktop 10.10 though so I can do perl development. BUT I want to keep a copy of the entire harddrive with the dell utility partition and Windows Vista in case I want to go back. I was thinking I could image the drive but I not sure what to use, I don't have Ghost or anything, Someone had told me about Clonezilla. Would that work for me? Is it hard to use? Also I want to burn the data to a DVD or something more storable than a harddisk.

  Read the article

• Running Ubuntu off a USB drive?

  - by Solignis

  I was wondering if a USB 2.0 Thumb drive has enough bandwidth to act as a primary system drive in an Ubuntu Linux server. More specifically an SAN server. I am running an iSCSI target, ZFS and NFS-kernel-server, BIND9 (Slave), and Openldap (Slave). I was thinking of resorting to a thumb drive because my new motherboard only has 4 SATA ports and I have 5 disks. 4 (ZFS Pool) 1 (System). And unless I get an expansion card there is no way to get more SATA ports. This "server" leans more twords a home server. I use in my lab with my VMware server. It provides storage, or atleast it did until it died. Would it still be better to go with the SATA hard disk?

  Read the article

• How can I make this REGEX cleaner?

  - by Solignis

  I have this regex I made to compare OS names to a line in a VMX file. It started out as seperate elsif statments but I ended up making into a single if statment. Anyhow here is the code, I am trying to find a way to make the code cleaner but it put each match on a seperate line it no longer works. elsif ($vmx_file =~ m/guestOSAltName\s+=\s"Microsoft\sWindows\sServer\s2003,Web\sEdition"|"Microsoft\sWindows\sSmall\sBusiness\sServer\s2003"|"Microsoft\sWindows\s2000\sAdvanced\sServer"|"Microsoft\sWindows\s2000\sServer"|"Microsoft\sWindows\s2000\sProfessional"|"Microsoft\sWindows\s98"|"Microsoft\sWindows\s95"|"Microsoft\sWindows\sNT\s4"/) { $virtual_machines{$vm}{"Architecture"} = "32-bit";

  Read the article

• How do I get rid of this "(" using regex?

  - by Solignis

  Hi there, I was moving along on a regex expression and I have hit a road block I can't seem to get around. I am trying to get rid of "(" in the middle of a line of text using regex, there were 2 but I figured out how to get the one on the end of the line. its the one in the middle I can hack out. Here is the snippet I am searching for in the config file. I put 2 examples. guestOSAltName = "Ubuntu Linux (64-bit)" guestOSAltName = "Microsoft Windows 2000 Professional" Here is the snippet I am working on. if ($vmx_file =~ m/^\bguestOSAltName\b\s+\S\s+\W(?<GUEST_OS> .+[^")])\W/xm) { $virtual_machines{$vm}{"OS"} = "$+{GUEST_OS}"; } else { $virtual_machines{$vm}{"OS"} = "N/A"; } I am thinking the problem is I cannot make a match to "(" because the expression before that is to ".+" so that it matches everything in the line of text, be it alphanumeric or whitespace or even symbols like hypens. Any ideas how I can get this to work? This is what I am getting for an output from a hash dump. $VAR1 = { 'NS02' => { 'ID' => '144', 'Version' => '7', 'OS' => 'Ubuntu Linux (64-bit', 'VMX' => '/vmfs/volumes/datastore2/NS02/NS02.vmx', 'Architecture' => '64-bit' },

  Read the article

• Would my situation be an appropriate place to use the ' /i ' REGEX attribute?

  - by Solignis

  I am making a large catalogue of all of the possible OS names that can be supported by my particular version of VMWare. Originally I was writing them all as they stood in the VMX files but then I found a website that had them all listed, the problem is they are not properly cased to provide a "perfect" match, would this be the perfect time to use the regex attribute for case insensitivity? Also as a side question, would it be possibly extract the list of OSs from the website?. They look to be in a HTML formated chart. It would save me a lot of time having to type them all out.

  Read the article

1