Search Results

Search found 1541 results on 62 pages for 'punching cards'.

Page 13/62 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • Can someone recommend a Compact Flash card to be used as a boot disk/fixed disk.

    - by Hamish Downer
    I have an early Acer Aspire One netbook, and the flash drive is really slow at writing. I've taken it apart to add more RAM, but I've pretty much stopped using it. I've read about people replacing the SSD with a Compact Flash card and a CF to ZIF adapter but I've also read about some Compact Flash cards where the manufacturer has permanently disabled the boot flag to stop people doing this kind of mod. (Can't find the link any more though). (Although I have just found some info about CF cards that says "Most CompactFlash cards by default identify themselves as removable media instead of fixed disk" and that this is an issue for Windows. So my most specific question is: can someone recommend a compact flash card that does allow the boot flag to be set and to be set as Fixed Disk? Please say whether you've done it yourself, or just heard about it from someone else. Beyond that, is this generally a problem?

    Read the article

  • 5v PCI to PCI-X or PCIe adapter?

    - by SiegeX
    We unfortunately have a very expensive ($10K) full-length 5 volt PCI card that we would like to use in the same system as another expensive PCI-X card. As luck would have it, it seems that PCI-X is not backwards compatible with 5v PCI cards. It would be a real shame to have to order a whole new server just to accommodate these two cards together. Does there exist any internal converter/adapter that will allow one to place a full-length 5v PCI card into either a PCI-X or PCIe slot? I've found an external expansion box that suits our needs but it's 1) External and 2) $1100. The only internal adapters I've been able to find go from Low-profile PCI - PCIe; nothing that seems to support full-height, full-length PCI cards.

    Read the article

  • Mother Board Question

    - by user33931
    1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

    Read the article

  • Excel - Filling images using a reference image

    - by tjans
    I have a spreadsheet that I use to create baseball cards for a tabletop baseball game. There are about 20 cards on my sheet, and I'd like to add a spot where I can set the logo and have it reflect that logo in each card without having to update 20 different images each time I create cards for a new team (and thus, a new logo). Is there a way to automate this process similar to setting one cell equal to the value of another (=A4, for instance)? I think the images aren't part of a cell and they float on top of the sheet, but I had hoped there was a way either with a macro or other VBA function (or maybe something built-in) that would accomplish this.

    Read the article

  • Why does installing NVidia 9600GT graphics card, take 1GB of RAM away from Windows?

    - by Nick G
    Hi, I've changed graphics cards in my PC and now Windows 7 (32bit) is reporting that I have a whole gigabyte less physical RAM in my PC. Why is this? Firstly, the machine has 4GB of physical RAM. The old card was an ATI 2600XT with 256MB and the new card is an NVidia 9600GT with 512MB. With the ATI card windows sees 3326MB. With the NVidia card, windows sees 2558MB. I realise that due to address space restrictions I will not see all 4GB with 32bit windows, but why is there such a massive loss of RAM when simply changing cards (bearing in mind BOTH cards have their own RAM and borrow no main memory like some built on chipsets do). Would using 64 bit windows solve this? Thanks Nick.

    Read the article

  • Few questions about SLI

    - by toomanyairmiles
    Hi all, thanks in advance for your help. I've just added a second card to my system so I can add a third monitor. I'd got as far as determining both cards need to use the same driver (after a blind alley with another cheap ATi card) so I'm now the proud owner of a second BFG 9800 GTX+ card. One is a BFG OCX and the other an BFG OC (small difference in clock speeds but they are in all other respects the same) but wanted to know the following:- 1) Is it worth adding the SLI connector, will it really boost overall performance (I'm guessing that the OCX card will then perform as the OC card does)? 2) Are SLI connectors (the one's that run across the top of the cards) motherboard or manufacturer specific? 3) If I do SLI the cards will I still be able to use all four monitor connectors or just the two on the master card? I'm not a gamer, I'm an IA and web designer so the system is mostly for Photoshop and Illustrator work and the occasional knock around in command and conquer.

    Read the article

  • Intel PRO/1000 Server NIC on Windows latency. How to measure?

    - by Bobb
    Please note - this question is about latency of the card itself. Not latency of internet or anything else. Thank you for your attention on this matter. It is often said that good server NIC does make difference compared to low grade cards and on-board Ethernet chips. I understand that on-board chip will likely consume CPU time and stand-alone card would use its own chip. Also server card would be faster than low-grade card. Are these 2 facts explaining most of the server cards advantages over on-board and low-grade cards ethernet? How would you measure latency on the card itself? I saw some reports stating some microseconds figures of NIC latency but I dont see how to measure that... Any advise will be appreciated.

    Read the article

  • Redundant APC UPS units, single server set up

    - by Sholom
    Hi All We have a very simple set up, looking for a very simple (reliable) solution: Setup: One Dell box with redundant power supplies running Windows 2003, plugged into two separate APC SmartUPS 1500 units (USB, no smart cards) on two separate circuits. Solution required: IF (UPS1 = Low) AND (UPS2 = Low) THEN: Shutdown gracefully ELSE: DO NOTHING!! APCUPSD only allowes for one instance (and therefore one UPS) in a windows environment. PowerChute can't do this without using APC Smart Cards which means utilizing our switch, but the switch does not have redundant power supplies, so it will only live for as long as one of the two UPS units. And no, i don't have the budget to buy two smart cards pluse a switch with redundancy ;) Thanks

    Read the article

  • Graphics Card Compatability

    - by Aaron
    I am a first time builder and while I have the basic understanding of how to put a computer together, one final thing eludes me. What are the requirements for instaling 2 or more graphics cards on a computer? Example: EVGA 015-P3-1589-AR GeForce GTX 580 (Fermi) FTW Hydro Copper 2 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card ECS NGTX580-1536PI-F GeForce GTX 580 (Fermi) 1536MB 384-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I am not planning on buying either of these cards in the near future. I simply am using them as an example because of the number of differences. As I understand it these two cards will work together (given the proper motherboard) because the only thing that matters is that they are both GeForce GTX 580. Is my assumption correct? If not, why?

    Read the article

  • I have no sound in my Media players

    - by Lefteris Gkinis
    I have Windows Professional x64 with two sound cards. for many months these cards (and the all sound system) was working fine. Suddenly my System (my PC) stops having sound. from WINDOWS MEDIA PLAYERS and for any other media players The default sounds from windows are working fine but I don't have sounds from media players. Also I open the "Sounds And Audio Device Properties" and in "Volume"Tab I press "Advance". There I receive an error "DirectSoundSetting not available". I have already Uninstall and re install my sound cards... But Nothing. Did anyone knows where the problem is?

    Read the article

  • Motherboard dual gfx power question

    - by user33931
    1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

    Read the article

  • weighted RNG speed problem in C++

    - by supert
    I have a (fast) bit of C++ code that samples cards from a 52 card deck: void sample_allcards(int table[5], int holes[], int players) { int temp[5 + 2 * players]; bool try_again; int c, n, i; for (i = 0; i < 5 + 2 * players; i++) { try_again = true; while (try_again == true) { try_again = false; c = fast_rand52(); // reject collisions for (n = 0; n < i + 1; n++) { try_again = (temp[n] == c) || try_again; } temp[i] = c; } } copy_cards(table, temp, 5); copy_cards(holes, temp + 5, 2 * players); } I am implementing code to sample the hole cards according to a known distribution (stored as a 2d table). My code for this looks like: void sample_allcards_weighted(double weights[][HOLE_CARDS], int table[5], int holes[], int players) { // weights are distribution over hole cards int temp[5 + 2 * players]; int n, i; // table cards for (i = 0; i < 5; i++) { bool try_again = true; while (try_again == true) { try_again = false; int c = fast_rand52(); // reject collisions for (n = 0; n < i + 1; n++) { try_again = (temp[n] == c) || try_again; } temp[i] = c; } } for (int player = 0; player < players; player++) { // hole cards according to distribution i = 5 + 2 * player; bool try_again = true; while (try_again == true) { try_again = false; // weighted-sample c1 and c2 at once double w[1326]; memcpy(w, weights[player], sizeof(w)); // h is a number < 1325 int h = weighted_randi(w, HOLE_CARDS); // i2h uses h and sets temp[i] to the 2 cards implied by h i2h(&temp[i], h); // reject collisions for (n = 0; n < i; n++) { try_again = (temp[n] == temp[i]) || (temp[n] == temp[i+1]) || try_again; } } } copy_cards(table, temp, 5); copy_cards(holes, temp + 5, 2 * players); } My problem? The weighted sampling algorithm is a factor of 10 slower. Speed is very important for my application. Is there a way to improve the speed of my algorithm to something more reasonable? Am I doing something wrong in my implementation? Thanks.

    Read the article

  • Why does this program stop running?

    - by designloper
    Hi everyone....I am developing a card making system...nothing fancy. Right got this far but program now stops running with no error when running after the first card sample i.e. " Enter 'OK' if this card is OK, otherwise enter an alternative border character: + ". Any suggestions Java Masters? //Ask user for input //makes use of print line method System.out.println("Enter name: "); //took the variables //called the object of the scanner 'cardOrder' //and use the Scanner objects method '.nextLine' //to read the next line of the input firstName = cardOrder.nextLine(); mInitial = cardOrder.nextLine(); lastName = cardOrder.nextLine(); //Print out the "Here is a sample card" + the first name, middle initial and last name System.out.println("Here is a sample card: \n\n" + firstName + mInitial + lastName + "**************" + "**************" + firstName + mInitial + lastName + "\n* *" + "\n*" + " " + firstName + mInitial + lastName + " *" + "\n* *\n" + firstName + mInitial + lastName +"**************" + "**************" + firstName + mInitial + lastName + "\n"); //Ask user is the card is OK to proceed to order query or if they want an alternative border character: + System.out.println("Enter 'OK' if this card is OK, otherwise enter an alternative border character: + "); //Check if user entered "OK" and store it in var optionA optionA = cardOrder.nextLine(); //test if (a == optionA){ System.out.println("\nHow many cards would you like? "); cardsOrdered = cardOrder.nextInt(); equals = (int) (cardPriceA * cardsOrdered); System.out.println("The price of " + cardsOrdered + " cards"+ " is £" + equals + ".\n"); System.out.println("No Discount given."); } else if(b == optionA) { //Print out the "Here is a sample card" + the first name, middle initial and last name System.out.println("Here is a sample card: \n\n" + firstName + mInitial + lastName + "++++++++++++++" + "++++++++++++++" + firstName + mInitial + lastName + "\n+ +" + "\n+" + " " + firstName + mInitial + lastName + " +" + "\n+ +\n" + firstName + mInitial + lastName +"++++++++++++++" + "++++++++++++++" + firstName + mInitial + lastName + "\n"); //Ask user is the card is OK to proceed to order query or if they want an alternative border character: + System.out.println("Enter 'OK' if this card is OK, otherwise enter an alternative border character: OK "); //Check if user entered "OK" and store it in var optionA optionA = cardOrder.nextLine(); if (a == optionA){ System.out.println("\nHow many cards would you like? "); cardsOrdered = cardOrder.nextInt(); equals = (int) (cardPriceA * cardsOrdered); System.out.println("The price of " + cardsOrdered + " cards"+ " is £" + equals + ".\n"); System.out.println("No Discount given."); } } else if (c == optionA) {//Print out the "Here is a sample card" + the first name, middle initial and last name System.out.println("Here is a sample card: \n\n" + firstName + mInitial + lastName + "**************" + "**************" + firstName + mInitial + lastName + "\n* *" + "\n*" + " " + firstName + mInitial + lastName + " *" + "\n* *\n" + firstName + mInitial + lastName +"**************" + "**************" + firstName + mInitial + lastName + "\n"); //Ask user is the card is OK to proceed to order query or if they want an alternative border character: + System.out.println("Enter 'OK' if this card is OK, otherwise enter an alternative border character: + "); //Check if user entered "OK" and store it in var optionA optionA = cardOrder.nextLine(); if (a == optionA){ System.out.println("\nHow many cards would you like? "); cardsOrdered = cardOrder.nextInt(); equals = (int) (cardPriceA * cardsOrdered); System.out.println("The price of " + cardsOrdered + " cards"+ " is £" + equals + ".\n"); System.out.println("No Discount given."); } }

    Read the article

  • Paper Gold Rush

    - by Chris G. Williams
    The last few days at the shop have been reminiscent of a marathon of Pawn Stars. Quite a few people have come in wanting to trade for store credit. Most of them have left disappointed. We did pick up a few things here and there (which hopefully I can sell.) The problem, in a nutshell, is that people get it in their head that a (YuGiOh) card is worth X amount because they looked it up 2-3 years a...go, or someone told them it was valuable... then they play it in their deck for a year without sleeves, and cram it in a binder covered in duct tape. By the time they bring the cards in to me, new sets have come out which often de-value the tournament usefulness of the card from $20 to *maybe* 50 cents, in mint condition. Which means I can offer them about 10-15 cents... only they are almost never in mint condition, which means I usually offer them nothing at all. Most of the time, you can watch their smile fade as I start going through their cards. It's kinda sad, really, since I know they think they've spent the last two years walking around with the keys to their own personal gold mine. I don't really enjoy seeing that look on a child's face. I like kids and I remember those moments when perception and reality crashed headlong into each other. It was seldom pretty. So, when I'm talking to a child, I try to take it easy on them and give them some suggestions on how to better preserve their cards. Sometimes though, it's an adult. Depending on the situation, my response to them varies pretty broadly. Most of the time though, I still feel pretty bad when it doesn't go their way.

    Read the article

  • SQL Contest – Result of Cartoon Contest

    - by pinaldave
    Earlier we had an excellent contest ran with the help of Embarcadero Technologies. We had two different contests on the same day sponsored by the kind folks at Embarcadero. Here are the details of the winners. 1) Win USD 25 Amazon Gift Cards (10 Units) We had announced that we will award USD 25 Amazon Gift Cards to 10 lucky winners who will download the DB Optimizer between Nov 29 to Dec 8. Here is the name of the winners. Winners will get Amazon Gift Cards USD 25 in the next 5 days of this blog post to their registered email address. If you do not receive the card, do send me email (Pinal at sqlauthority.com) and I will follow up on the details. Name of the winners: Ramdas Narayanan Krishna Uppuluri Donna Kray Santosh Gupta Robert Small Samit Bhatt Bernd Baumanns Rodrigo Oriola Jim Woodin Alfred Sandou 2) Win Star Wars R2-D2 Inflatable R/C We had cartoon contest. If you have not read the cartoon – I suggest you go over this cartoon story one more time. The task was to give the correct answer with some interesting note along with it. We selected a few good quotes and put them together. We later on picked the winner by using random algorithm. The winner gets fantastic Star Wars R2-D2 Inflatable R/C. Name of the winner: Aadhar Joshi. He wins R2-D2. You can read his comment over here. Thank you all for participating in the contest – this was fun – if you have liked it do let me know and we will come up with something new for you next time. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Need a PCIe desktop graphics card for dual-monitor

    - by Graham
    I have a mid-2008 workstation with two HD monitors supporting HDMI and DVI inputs. Since Ubuntu 11.10, I have experienced no end of trouble with my NVidia Quadro NVS 290 in TwinView dual-monitor output. Others have similar desktop TwinView woes. I want a new graphics card. Previously I asked for a graphics card recommendation and response was Nvidia Geforce GTS 450... but really I'm looking for someone who has actually got a working dual-monitor desktop to tell me what card they use so I can get something that is known to work. So please, people who have no-issues with their 64-bit Ubuntu 12.04 Unity 3D desktop spread across two HD-resolution external monitors (either DVI or HDMI connector), and who also run Google Chrome (which throws a spanner due to its own GPU compositing)... please let me know what graphics card you have so I can buy one. Gathering Options These seem to be the Nvidia cards featuring dual DVI. But they all seem to be gaming cards - what has dual-DVI, good support, but is not a massive gaming card? Nvidia GTS 450 (previously recommended) - 2x DVI Nvidia GTX 550 Ti (used by System76) - 2x DVI Nvidia GT 430 (used by System76) - 1xDVI, 1xHDMI Nvidia GT 640 (found on NVidia site) - 1xDVI, 1xHDMI (also GT 620, GT 630) Has anyone had a good desktop dual-monitor Unity 3D experience with ATI cards?

    Read the article

  • Computer Bugs - Etymology and Entomology

    - by PointsToShare
    Whatever bugs you My wife and I used to take some of our summer vacation I a cabin on the shore of Lake Atsion in NJ. I t is a delightful place in the Wharton forest with Brown yet fresh water, where we would canoe, swim and enjoy true rest. Alas, in the last few years, yellow flies also discovered the area’s pastoral delights and came in hoards to bug us. So much so that we had to give up. As a computer programmer I abhor bugs. The bugs that bug me – except the pesky yellow flies – are program bugs , a specific variety of computer bugs. You can find an excellent take on the etymology of the word ‘bug” in this delightful monogram: http://www.jamesshuggins.com/h/tek1/first_computer_bug.htm In my youth, I worked on Burroughs computers. Unlike their IBM brethren, the Burroughs used a 96 column card. The cards were much smaller than the 80 column IBM cards. We wrote our programs on coding sheets and then a key-punch operator transcribed them into punched cards. These were fed into a card reader and compiled. The compiler would notify us of compiler errors or bugs, but it was not always easy to get the meaning of the message. My friend Mark Wildt, also a Burroughs veteran, gave me an old punched card from one of his programs. Obviously a bug!! Here It Is!! That’s All Folks!

    Read the article

  • Another guvcview issue? Core dump!

    - by user290498
    guvcview is core dumping with my Sony Handycam plugged in. It works fine with my standard Logitech Webcam. I deleted the config file so it could re-create it. here is the output: $ guvcview guvcview 1.5.3 Could not open /home/rayj/.guvcviewrc for read, will try to create it write /home/rayj/.guvcviewrc OK ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 ERROR opening V4L2 interface for /dev/video1 Init. stk1160 (location: usb-0000:00:1d.0-1.5) { pixelformat = 'UYVY', description = '16 bpp YUY2, 4:2:2, packed' } VIDIOC_ENUM_FRAMESIZES - Error enumerating frame sizes: Inappropriate ioctl for device Unable to enumerate frame sizes. : Inappropriate ioctl for device { pixelformat = 'RGB3', description = 'RGB3' } { ?GSPCA? : width = 720, height = 480 } fmtind:2 fsizeind: 1 { pixelformat = 'BGR3', description = 'BGR3' } { ?GSPCA? : width = 720, height = 480 } fmtind:3 fsizeind: 1 { pixelformat = 'YU12', description = 'YU12' } { ?GSPCA? : width = 720, height = 480 } fmtind:4 fsizeind: 1 { pixelformat = 'YV12', description = 'YV12' } { ?GSPCA? : width = 720, height = 480 } fmtind:5 fsizeind: 1 vid:05e1 pid:0408 driver:stk1160 checking format: 1196444237 Format unavailable: 1196444237. Init v4L2 failed !! Init video returned -2 trying minimum setup ... Segmentation fault (core dumped)

    Read the article

  • How can I Implement KeyListeners/ActionListeners into the JFrame?

    - by A.K.
    I'll get to the point: I have a player in my game that you control with the keyboard yet the key methods in the player class and ActionListener w/ KeyAdapter in the Board class don't seem to fire. So far I've tried adding these key methods into the JFrame, doesn't seem to let me move him even though other objects that I have (enemies) can move fine. Here's part of the JFrame class with the event listeners: frm.addKeyListener(KeyBoardListener); public void mouseClicked(MouseEvent e) { nSound.play(); StartB.setContentAreaFilled(false); cards.remove(StartB); frm.remove(TitleL); frm.remove(cards); frm.setLayout(new GridLayout(1, 1)); frm.add(nBoard); //Add Game "Tiles" Or Content. x = 1200 nBoard.setPreferredSize(new Dimension(1200, 420)); cards.revalidate(); frm.validate(); } public KeyListener KeyBoardListener = new KeyListener() { @Override public void keyPressed(KeyEvent args0) { int key = args0.getKeyCode(); if(key == KeyEvent.VK_LEFT) { nBoard.S.vx = -4; } if(key == KeyEvent.VK_RIGHT) { nBoard.S.vx = 4; } if(key == KeyEvent.VK_UP) { nBoard.S.vy = -4; } if(key == KeyEvent.VK_DOWN) { nBoard.S.vy = 4; } if(key == KeyEvent.VK_SPACE) { nBoard.S.fire(); } } @Override public void keyReleased(KeyEvent args0) { int key = args0.getKeyCode(); if(key == KeyEvent.VK_LEFT) { nBoard.S.vx = 0; } if(key == KeyEvent.VK_RIGHT) { nBoard.S.vx = 0; } if(key == KeyEvent.VK_UP) { nBoard.S.vy = 0; } if(key == KeyEvent.VK_DOWN) { nBoard.S.vy = 0; } } @Override public void keyTyped(KeyEvent args0) { // TODO Auto-generated method stub } };

    Read the article

  • Finishing an iteration early

    - by f1dave
    I'd like some input on this on those working with agile methodologies... A current project is finding that development on our planned user stories is finishing some time before the end of the iteration, and that the testing effort and business acceptance is what's actually dragging us out longer towards the end. This means that the devs in question have spare time, and they're essentially going out to the iteration+1 backlog and starting work on cards there before our current iteration cards are 'done'. As iteration manager, I want to put a stop to this - I want a more team-orientated approach where the group takes ownership of getting all the cards done, as opposed to "Well, dev's done so what do I dev next?" The problem I face is convincing the team of this. On one hand, I understand why the devs don't want to test the code they've written (there are unit tests they write of course, but the manual testing to be done could be influenced by their bias). The team sees working ahead as making our next iterations easier, because a lot of the work is done before we start. I see this as screwing with the whole system of planning/actuals - but it's difficult to convince the team as to why this matters. What advice can you guys and girls give? How do we stop devs reaching ahead? What should they be doing instead? How much of a problem is this in the scheme of things, if things are still getting done?

    Read the article

  • CodePlex learns to talk to other services!

    CodePlex is now able to talk to other services! For example, if you want CodePlex to tell Trello to update cards on your Trello board, it can do it. Or if you want CodePlex to notify your Campfire chat room when updates are pushed, it can do that too. To start off, we are going to be adding support for the following services: Campfire – Notify a Campfire chat room when commits occur HipChat – Notify a HipChat chat room when commits occur Trello – Add commit summaries to Trello cards by referencing those cards in commit messages Twitter – Notify your Twitter followers when updates are pushed to your project In addition, we will continue to support our existing integrations with Windows Azure – Continuously deploy to Windows Azure on pushes (For Git and Hg projects) AppHarbor – Continuously deploy to AppHarbor on pushes To set up these integrations for your project, navigate to the project settings page as a project coordinator, and click on the services section as seen below:   While we are starting with these six services, the infrastructure is now in place to allow us to quickly roll out new integrations. We would love to hear which services and integrations you would like to see most on our suggestions page. We realize that there are some services and URLs that only make sense for your project to send notifications to. To support this scenario, we plan to add generic web hooks in the near future. Have ideas on how to improve CodePlex? Please visit our suggestions page! Vote for existing ideas or submit a new one. As always you can reach out to the CodePlex team on Twitter @codeplex or reach me directly @Rick_Marron.    

    Read the article

  • Dell Upgrade to 12.04 LTS No wifi, graphic card driver and bluetooth Problem?

    - by Mattlinux1
    (Dell inspiron m5040 Upgrade to 12.04 LTS from 11.10 wifi wont work and has two bluetooth icons?) Old title of post! No Wifi/Bluetooth Problem. "Both Fixed", see below comments for bluetooth fix and see bottom answer for wifi fix. My online upgrade of 12.04 LTS, was installed to my laptop the Dell inspiron m5040, when it was done i found that my wifi did not even get picked up anymore and i now have two bluetooth icons at the top?? So what i have been doing for now is at the boot screen. I hit the use previous linux version, this works fine but also has the two bluetooth at the top. Is very thankful for any answers for this fix, Thank You. Ok bluetooth problem solved by – fossfreedom answer by deleting the other bluetooth program running in software center. Now the other problem is Wifi: just have to restart system as it works in previous linux version boot opt, but on the first boot screen opt run ubuntu it will not pick up wifi drivers. Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-,BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-basedhardware. And 3D-accelerated proprietary graphics driver for ATI cards. This driver is required to fully utilise the 3D potential of some ATI graphics cards, as well as provide 2D acceleration of newer cards. will not instill is there anyway for me to make a copy of the drivers via usb HDD and then put them on new upgraded version.

    Read the article

  • Problems with MYSQL database

    - by shinjuo
    I have a database that worked fine until I decided to add a log onto the page. here is what I have now: <body> <?php if($_SERVER['REQUEST_METHOD'] == 'POST') { require("serverInfo.php"); mysql_query("UPDATE `cardLists` SET `AmountLeft` = `AmountLeft` + ".mysql_real_escape_string($_POST['Add'])." WHERE `cardID` = '".mysql_real_escape_string($_POST['Cards'])."'"); echo "\"" .$_POST['Add'] ."\" has been added to the inventory amount for the card \"". $_POST['Cards']. "\""; mysql_query("INSERT INTO `log` (`changes`, `amount`, `cardID`, `person`, Date)VALUES('ADDED','$_POST['Add']','$_POST['Cards']', '$_POST['Person']', NOW())"); mysql_close($link); } ?> <form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="post"> <?php require("serverInfo.php"); ?> <?php $res = mysql_query("SELECT * FROM cardLists order by cardID") or die(mysql_error()); echo "<select name = 'Cards'>"; while($row=mysql_fetch_assoc($res)) { echo "<option value=\"$row[cardID]\">$row[cardID]</option>"; } echo "</select>"; ?> Amount to Add: <input type="text" name="Add" maxlength="8" /> Changes Made By: <select name="Person"> <option value="justin">Justin</option> <option value="chris">Chris</option> <option value="matt">Matt</option> <option value="dan">Dan</option> <option value="tim">Tim</option> <option value="amanda">Amanda</option> </select> <input type="submit" name ="submit" onClick= "return confirm( 'Are you sure you want to add this amount?');"> </form> <br /> <input type="button" name="main" value="Return To Main" onclick="window.location.href='index.php';" /> </body> </html> it works fine until I added the: mysql_query("INSERT INTO `log` (`changes`, `amount`, `cardID`, `person`, Date)VALUES('ADDED','$_POST['Add']','$_POST['Cards']', '$_POST['Person']', NOW())"); mysql_close($link); Can anyone see what is going on?

    Read the article

  • JS Split ( ) to check if substring exists in Array

    - by Javacadabra
    I have an array of products that are stored as Strings in this format productname:quantity. The issue I am running into is that if a user adds one product with a quantity of x it is inserted into the array as it should. However, if they then decide to add more of a particular product a new entry is made into the array instead of checking if the product already exists and adjusting the quantity to the new value. oldQty + newQty. For example this is my array: ["CBL202659/A:1","OUTER9:1","PALLET CARDS:1"] If I add another PALLET CARDS product it creates a new entry rather than updating the quantity of the existing item to 2. New array ["CBL202659/A:1","OUTER9:1","PALLET CARDS:1","PALLET CARDS:1"] I would like the array to end up like this: - updating the quantity ["CBL202659/A:1","OUTER9:1","PALLET CARDS:2"] Currently this is my code: I use the split() method to seperate the String where a colon occurs and store the product name and quantity in two seperate variables. $(".orderBtn").click(function(event){ //Show the order Box $(".order-alert").show(); event.preventDefault(); //Create the Array var productArray = []; //Get reference to the product clicked var stockCode = $(this).closest('li').find('.stock_code').html(); //Get reference to the quantity selected var quantity = $(this).closest('li').find('.order_amount').val(); var item = stockCode + ":" + quantity; var itemCheck = stockCode + ":"; if(quantity == 0){ console.log("Quantity must be greater than 0") }else{ //If no Cookie exists, create one and add the Array if ($.cookie('order_cookie') === undefined) { console.log("CREATE NEW COOKIE"); //Add items to Array productArray.push(item); //Add Array to Cookie $.cookie('order_cookie', JSON.stringify(productArray), { expires: 1, path: '/' }); //If the Cookie already exists do this } else { productArray = JSON.parse($.cookie('order_cookie'));//get ref to array if(productArray.indexOf(itemCheck)!= -1){//It exists so update qty console.log("EXISTS... updating item: " + itemCheck); //var index = productArray.indexOf(item); //var update = productArray[index].split(":"); //var name = update[0]; //var oldQty = update[1]; //console.log(name + ":" + oldQty); //productArray[index] = item; }else{//It does not exist, so add to array console.log("Does not exist... adding new item: " + item); //Append items onto the Array productArray.push(item); } //Update the Cookie $.cookie('order_cookie', JSON.stringify(productArray), { expires: 1, path: '/' }); console.log($.cookie('order_cookie')); } //Display the number of items in the Array in the Order Box $('#order_counter').html(productArray.length); } }); I suppose the real question I am asking here, is if it is possible to search the array for a subString - containing productname: ??

    Read the article

  • Why Haven’t NFC Payments Taken Off?

    - by David Dorf
    With the EMV 2015 milestone approaching rapidly, there’s been renewed interest in smartcards, those credit cards with an embedded computer chip.  Back in 1996 I was working for a vendor helping Visa introduce a stored-value smartcard to the US.  Visa Cash was debuted at the 1996 Olympics in Atlanta, and I firmly believed it was the beginning of a cashless society.  (I later worked on MasterCard’s system called Mondex, from the UK, which debuted the following year in Manhattan). But since you don’t have a Visa Cash card in your wallet, it’s obvious the project never took off.  It was convenient for consumers, faster for merchants, and more cost-effective for banks, so why did it fail?  All emerging payment systems suffer from the chicken-and-egg dilemma.  Consumers won’t carry the cards if few merchants accept them, and merchants won’t install the terminals if few consumers have cards. Today’s emerging payment providers are in a similar pickle.  There has to be enough value for all three constituents – consumers, merchants, banks – to change the status quo.  And it’s not enough to exceed the value, it’s got to be a leap in value, because people generally resist change.  ATMs and transit cards are great examples of this, and airline kiosks and self-checkout systems are to a lesser extent. Although Google Wallet and ISIS, the two leading NFC payment platforms in the US, have shown strong commitment, there’s been very little traction.  Yes, I can load my credit card number into my phone then tap to pay, but what was the incremental value over swiping my old card?  For it to be a leap in value, it has to offer more than just payment, which I can do very easily today.  The other two ingredients are thought to be loyalty programs and digital coupons, but neither Google nor ISIS really did them well. Of course a large portion of the mobile phone market doesn’t even support NFC thanks to Apple, and since it’s not in their best interest that situation is unlikely to change.  Another issue is getting access to the “secure element,” the chip inside the phone where accounts numbers can be held securely.  Telco providers and handset manufacturers own that area, and they’re not willing to share with banks.  (Host Card Emulation, which has been endorsed by MasterCard and Visa, might be a solution.) Square recently gave up on its wallet, and MCX (the group of retailers trying to create a mobile payment platform) is very slow out of the gate.  That leaves PayPal and a slew of smaller companies trying to introduce easier ways to pay. But is it really so cumbersome to carry and swipe (soon to insert) a credit card?  Aren’t there more important problems to solve in the retail customer experience?  Maybe Apple will come up with some novel way to use iBeacons and fingerprint identification to make payments, but for now I think we need to focus on upgrading to Chip-and-PIN and tightening security.  In the meantime, NFC payments will continue to struggle.

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >