Search Results

Search found 4141 results on 166 pages for 'router'.

Page 13/166 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• New router, old network, but devices won't talk to each other

  - by JDedman

  I plugged the new router in and get internet on both the computer and the Xbox 360. The Xbox 360 only recognizes the computer when I turn the Smart Wall off in my Norton antivirus, and only when the computer is hardwired. How do I make it so that Norton will allow the computer and Xbox to talk? Reset the MAC address? I have no idea how to do this, and I'm starting to think it's the answer to my problem. Any help would be greatly appreciated.

  Read the article

• How to use suse linux as a small router

  - by Mingo

  I has 2 subnet 192.168.1.0/24 and 192.168.2.0/24 and one suse linux, the linux has 2 interface, eth0 and eth1. I want to configurate the suse linux as a router so that make these 2 subnet can communicate with each other. This is my steps: 1.set the linux eth0 ip as 192.160.1.254,eth1 ip 192.168.2.254 2.add route in linux: route add -net 192.168.1.0 netmask 255.255.255.0 dev eth0 route add -net 192.168.2.0 netmask 255.255.255.0 dev eth1 3.set 192.168.1.0/24 gw as 192.168.1.254,and 192.168.2.0/24 gw as 192.168.2.254 I am not sure this will work or not? or some step i missing?

  Read the article

• Cisco 2811 router ignored input errors

  - by elbekay

  I've got a Cisco 2811 (AdvIPServices 12.4(25e)) that is showing input errors on both its interfaces, all the errors are of the ignored type. The counter for ignore errors is not increasing continuously, which made me think it would be happening in line with traffic bursts, but there really isn't a large amount of traffic running through it at any time. Both the router interfaces are connected to a 4900 (IPBase 12.2(54)) series switch. The only things I can see are: There is a slight mismatch in duplex/speed negotiation settings, one side is set to auto/auto and one full/auto, however they have negotiated fine. There have been a few fallbacks on the interface buffers, and some trims in the public buffers. Any suggestions for things to look at? I will be correcting the duplex neg settings, and might try a buffer tune, but I don't think it will help.

  Read the article

• Router stopping my python server

  - by drfrev

  This was originally posted in stackoverflow.com but it was suggested I move it here after it was realized it wasn't my code that was wrong. So my problem, very simply, is that I cannot get my computers that are connected to my router to communicate. example: If I ping a wireless computer I get no responce and the Request times out If I ping a computer wired to the modem directly it works fine. When I ping I use the local ip for each case. *if it helps my original post is here: http://stackoverflow.com/questions/12593024/python-cannot-go-over-internet-network/12593361#12593361 And some screen shots of different things are here: http://imgur.com/a/jUZ4G#3 thank you, any help is greatly appreciated. NOTE I am heading off to bed now, so I will respond around 6:00 AM EST if anyone posts some help

  Read the article

• Can't connect to wireless router anymore due to data rate problem

  - by Jay White

  I was playing around with my wireless router, and switched the mode to a fixed mode B. Now< I can no longer assoicate to the AP. Windows does not give any particular error message, but with wireshark I see that the returned error is that the client does not support the necessary data rate. My wireless card is type n, and it is set to mode a/b/g compatible. I tried setting ot to just b, however this made no difference. How can I set the data rate of my card so that I can connect again to my AP? I would prefer not to just reset the device, as there has been some configuration done that would be a pain to redo, and as well I do not have the ISP password handy. Regardless I would like to understand this situation better.

  Read the article

• Can't find newer DLINK Router DIR-400 firmware

  - by Junior Mayhé

  If you're here, it means you also have a Dlink 400 router. I asked DLINK but they didn't answer my question. I asked DLINK support again, but this time no answer (2 weeks later). In DLINK FTP site there is no firmware for DIR-400. Past year, Googling around Russia, I found a FIRMWARE_DIR400_v1.02B03.bin. But I am trying to figure out if is there any update, a 1.03 version or superior. Can anyone tell me why DLINK doesn't show this firmware update on their site, and if this DIR-450 is compatible with mine?

  Read the article

• Offloading Cable Modem operations to Router

  - by Matt

  I may be crazy here, but I seem to recall a conversation in the past stating that it was possible to offload some of the operations taken by one's cable modem to one's router. The logic was that since the cable modem is often equipped with a cheaper processor as it is supplied by your provider, that it often chokes even crashes when you start a torrent or something else with a lot of connections. I seem to recall that some routers offered the ability to take some of the modem's operations. Is this possible or have I imagined the whole thing? I ask because my modem seems to have many issues when I start torrents.

  Read the article

• Cisco router for educational purposes

  - by user39214

  Hey all. I want to buy a Cisco router to use on my home network. I'm just hoping to get a unit that is not too old and is not a SOHO model. I want to run the latest Cisco OS just to learn how Cisco does things. I would use it to divide my network into two or three IP networks, firewalling, etc. I'm just asking for a model name/number. Thanks.

  Read the article

• Users not getting ip when connected through wifi,but wired connection getting ip in ddwrt router

  - by Kevin Parker

  I am having DD-WRT v24-sp2(05/08/11) running on Asus RT n 13 u B1 router,with dhcp on. But users not able to connect through wifi...its showing obtaining ip address and disconnects there after. Wired Devices are getting ip address and able to access internet.Wifi was working till yesterday,but all of a sudden it stopped working. on the ddwrt controlpanelsystem information under Wireless Clients mac address of clients that are trying to connect are appearing but soon it disappears. but no such issue with wired clients. Can any one please help me in fixing this..

  Read the article

• How to configure QoS on home router

  - by Joril

  I have a USR9105 router and I'd like to configure its QoS to prioritize web traffic (browser) over everything else (e.g. torrents). I'm confused by its interface though: "IP precedence" allows selecting a number from 0 to 7, while "IP type of service" can be one of "Normal Service", "Minimize cost", "Maximize reliability", "Maximize throughput" and "Minimize delay". How should I set it up? Is QoS the wrong solution to avoiding torrents slowing down browsing to a crawl? Should I set up a proxy and traffic shaping instead?

  Read the article

• How to configure QoS on home router

  - by Joril

  I have a USR9105 router and I'd like to configure its QoS to prioritize web traffic (browser) over everything else (e.g. torrents). I'm confused by its interface though: "IP precedence" allows selecting a number from 0 to 7, while "IP type of service" can be one of "Normal Service", "Minimize cost", "Maximize reliability", "Maximize throughput" and "Minimize delay". How should I set it up? Is QoS the wrong solution to avoiding torrents slowing down browsing to a crawl? Should I set up a proxy and traffic shaping instead?

  Read the article

• Access Other Computer via ADSL Modem and Router

  - by Sohail

  My network configuration is like this ISP - Modem - Router - Computer and the same goes for my friend. We want to share large files or to access each other's computer. The Passwords to login to the web page of each other modems are known. I mean, we can access each other Modem Web GUI easily ( because we know the WAN IP of each other modem ). The question is how do i access his or how do he access my computer? Is there any way to do so. Remote desktop connection is not working :( Please help

  Read the article

• Why are there unknown URLs in router log?

  - by Martin

  I recently looked at my router log. Why are a lot of requests that I don't send originated from a computer in my home network? They do not look like 3rd-party advertisements / images embedded in a page. The request have patterns, such as: top-visitor.com/look.php www.dottip.com/search/result.php?aff=8755&req=nickelodeon+games www.placeca.com/search/result.php?aff=3778&req=wireless+cell+phone www.bb5a.com/search.php?username=3348&keywords=flights www.blazerbox.com/search.php?username=2341&keywords=colorado+springs+real+estate www.freeautosource.com/search.php?username=sun100&keywords=vehicle www.1sp2.com/search.php?username=20190&keywords=las+the+hotel+vegas www.loadgeo.com/search/result.php?aff=10357&req=winamp www.exalt123.com/portal.php?ref=seo2007 www.7catalogs.com/search.php?username=la24&keywords=shutter www.theloaninstitute.com/search.php?username=kevin&keywords=webcam www.grammt.com/search.php?username=2530&keywords=bob And there are hundreds of these requests send within a second. So what's happening?

  Read the article

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• Will disabling NAT on my wireless router cause a performance hit on my DSL router?

  - by user117313

  I have a Thomson TG508v2 router/modem and a brand new AirPort Extreme connected to it. At first, I set the AirPort Extreme to "share a public IP", which enables DHCP/NAT. Everything works great but I was having the Double NAT error. So I set the AirPort Extreme as bridge mode, which disables DHCP/NAT and let my crappy modem handle my internal network IPs. Will this cause any performance hit in my network? I'm worried because I'll outsource this job from AirPort Extreme (premium hardware) to the crappy modem. Before you suggest, I tried setting my modem as a bridge and configuring PPPoE on the AirPort Extreme, however it wouldn't connect to the internet, so I just dismissed leaving the modem as bridge.

  Read the article

• Belkin Wireless G router not working on Windows 7

  - by coore

  I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

  Read the article

• Looking for a router with multiple WAN ports and load balancing

  - by Cyrcle

  I'm going to be moving in a few months. The location I'm moving to is great except it's on a road with very few people, so the internet access option is limited to DSL at 1.6Mbps down, 384kbps up. This is much slower than I'm used to. One option is to get at least two of the DSL lines. There's also good possibility that I'll be able to get WiMax or similar. I've been looking around a bit and it seems like what I need is a load balancing router with multiple WAN ports. Can anyone recommend some good ones? I could also go with a small power efficient Linux box with multiple NICs. What would be good software for that? It'd need to be able to handle around 10Mbps. Thanks for any help

  Read the article

• duplicate video stream using a router (?)

  - by Dani

  I have a viedo stream coming from one site, I want to do the following with the minimum delay possible: I want to duplicate the stream (inside the router - preferred) and send it to a few more locations one of them is local network and the rest - on other networks. I want to be able to do it to several streams simultaneously. Is it possible to do this - using network devices only ? What device is capable to do this ? (I can always record the stream and rebroadcast it - but that's a lot of delay, I'm looking for functionality that similar to port duplicating, but on higher layers). Thanks.

  Read the article

• What router settings to use for wireless home network

  - by Question Overflow

  While looking at the setting of my wireless router, I am bewildered by the array of options available. Despite searching on Wikipedia to try to understand the various acronyms, I am still clueless to decide what is the best setting to use although the default works fine. Rather than calling the internet service provider (ISP) to ask them the correct settings, I hope to learn more about the differences between some of the options listed below, so that I would be able to make a more informed decision from now onwards: PPPoE vs PPPoA LLC vs VC-Mux Bridge vs Routed In addition, I would also like to know the significance of the following MTU VPI VCI And whether or when I should manually specify DNS?

  Read the article

• Windows Server 2003: Router, DHCP, Looses internet connection

  - by jM2.me

  I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server looses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

  Read the article

• Windows Server 2003: Router, DHCP, Loses internet connection

  - by jM2.me

  I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server loses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

  Read the article

• Unstable wireless connection on Ubuntu only (router config problem?)

  - by crunch

  so I'm using Ubuntu 14.04 and I could connect to all Wi-Fi's that I've tried and it worked fine... Except for this router that I have at home. This connection seems to be unstable, it just randomly disconnects and reconnects. On the same machine I have Ubuntu 13.10 (same problem) and Windows 8 (no problem). Also there are no Wi-Fi problems when I connect with my Android phone. So I figured it must be some config issue. I tried tweaking some settings/restoring default on the router but I don't really know what I'm doing so, unsurprisingly, it didn't fix the problem.

  Read the article

• Belkin Wireless G router not working on Windows 7

  - by coore

  I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

  Read the article

• Access Configuration Page of Modem (in bridge mode) through router

  - by Ujjwal Singh

  Given the Network Configuration: Internet (121.243.x.y/27) | (121.243.x.z) Static : Public Global IP Modem Bridge Mode | WiMAX (192.168.1.1/24) +169.254.1.1/24 : Modem Configuration Page | (192.168.1.2) Router DLink DIR 615 | Ethernet + WiFi (192.168.0.1/24) | Local network (192.168.0.2) Workstation Ethernet | no WiFi Is there any way, maybe using Routing Tables, to access the Modem configuration page at 169.254.1.1 from my local network, using a Windows 7 PC? Note that the modem is currently able to display its configuration page at 169.254.1.1, i.e. even while it is in bridge mode.

  Read the article

• Sharing Internet over Wireless Router

  - by Alandt

  I have a very strange question today - how do I share my dial up internet (yeah I know you are gonna say that is slow but broadband internet isn't available in my area), so dial up and 3G connection is all I got. I also have a Vodafone USB 3G modem that picks up 3G network, I am planning to use my Vodafone 3G modem in the day since I have free dial up internet from 7:00 pm in the night untill 7am the next morning. Some additional details: * My PC is running Windows XP Professional SP3 * I have a Sitecom Wireless Router 150N X1 WLR- 1000 I would appreciate it if anyone can provide me with a step-by-step guide! Thanks

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >