Search Results

Search found 4141 results on 166 pages for 'router'.

Page 16/166 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

  • How to statically configure DNS servers on a Cisco router when the WAN interface uses DHCP?

    - by Massimo
    I have a Cisco router (model 887VA, IOS 15.4) used to connect a LAN to the Internet via ADSL. The WAN interface uses DHCP: interface ATM0.1 point-to-point ip address dhcp I need the router to use a statically-defined DNS server for name resolution: ip name-server A.B.C.D However, the router insists on using the DNS servers supplied by the ISP via DHCP: Router#ping www.google.com Translating "www.google.com"...domain server (<ISP DNS>) [OK] Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 173.194.116.208, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/45/48 ms How can I tell the router to ignore the ISP-supplied DNS servers and only use the statically-configured one?

    Read the article

  • Why do some devices seemingly need the wifi router to reboot before they can connect?

    - by CreeDorofl
    I've noticed a pattern but I'm not sure if it's a crappy router, crappy wireless device, or maybe everything is working as intended. I can wirelessly connect my office PC to the router's settings page for a day, maybe two, then afterwards I can't anymore until it's reset. Unrelated, but similar, in various places that offer free wifi, my kindle will connect fine most days, but occasionally won't unless the router is reset. After the reset, I connect ok. What's happening behind the scenes that makes a router stop allowing you to connect? Is it something on my end that's changing, or on the router's end?

    Read the article

  • Why my router alows to connect to the internet only after plugging the cord to laptop?

    - by gennad
    Hi all! I'm using Ubuntu 10.10. I have D-link dir-320 wireless router. When I turn on my laptop Lenovo G555, I'm trying to connect to router by it's usually unsuccessful. But if I'll pull the ethernet cord from the router and insert it into my laptop, everything will work well. And if after that I'll pull the ethernet cord from the laptop and insert it into the router, my laptop connects to the router and it will have Internet access via wifi. How to make the laptop directly connects to the Internet after booting without switching the cord?

    Read the article

  • Two routers network routing settings

    - by xiamx
    I have two routers, Router A is connected to the internet, and Router B is connected to the LAN port of Router A. Router A: 192.168.1.1 Subnet 255.255.255.0 Router B: IP leased from router A: 192.168.1.2 gateway 192.168.0.1 subnet 255.255.255.0 I have a machine C plugged to router A with ip 192.168.1.3 also a machine D plugged to router B with ip 192.168.0.199 I want to access machine D from a machine C. What settings do I need to change to do that?

    Read the article

  • Samba port forwarding?

    - by Robert
    Here's my situation: On my network, most of the clients are on an outside router. Router 1 192.168.1.1 | | - Client | Router 2 192.168.1.2 to router 1, | 192.168.2.1 to clients within | Samba server - 192.168.2.25 I cannot figure out how to get clients under router 1 to access the Samba shares in router 2. I have forwarded ports 139 and 445 to the appropriate machine in router 2 but machines in router 1 still cannot access the server. How would I set this up?

    Read the article

  • Why does my Belkin Play router regularly stop working for a few minutes at a time?

    - by YeahStu
    I recently purchased a Belking Play dual-band router for my home. About every few hours, the router stops working or "cuts out" for several minutes before coming back online automatically. My old one did this as well. I figured out a main problem was my wireless home phone, which sends a 2.4GHz signal. Anytime someone would call the phone, my router would get interrupted. Therefore, I unplugged this phone and got a wired phone. Unfortunately, my wired phone has the same problem. Therefore, I unplugged the wired phone. Unfortunately, my router still has regular issues. I live in a home with neighbors within close proximity to me, so it might be possible that their devices are the ones causing me problems. How can I determine what is causing my router problems? I thought that the point of a dual-band router was that if a signal was interfering on one band then it would be uninterrupted on another. However, it seems that is not the case. Does anyone have any tips on how to troubleshoot this or any knowledge you can share to properly set my expectations?

    Read the article

  • Why can't I connect to my router's config page with Windows 7?

    - by user17940
    I've got a Belkin wireless router, and just bought a new Dell computer with Windows 7 pre-installed. I can connect to the Internet and my home network just fine, but when I try to visit my router's configuration page at http://192.168.2.1, I get a "Connection was reset" error. Nothing I do will make the router's configuration page come up in my web browser. More background information: I could always get to the router's config page from my Windows XP machine. I never had any trouble prior to getting this Windows 7 computer. I can ping 192.168.2.1 successfully from my Windows 7 computer. My PC is connected to the router by a physical CAT5 cable, not via wireless. Every device connected to my router, including the new computer, can get to the Internet with no problem. Here are some things that did not solve the problem: I tried turning off IPV6 in Windows. I tried turning off my firewall and antivirus software I tried using https instead of http I tried disabling and then enabling the network connection in Windows I tried reverting my network card driver back to an older version I have tried both Firefox and Internet Explorer web browsers. Has anyone experienced something like this before, and solved it? Thanks a lot for your help!

    Read the article

  • How do I determine how future-proof and stable a router is?

    - by Aarthi
    I mentioned in my last question that my wireless router had a bad habit of crashing. After consulting with the Super User chatroom, as well as my sysadmin, I've decided I may as well purchase a new router. However, I'm unsure how to evaluate all these tech specs that get touted about. The two things that seem to be the most important to me are: (1) keeping my router future-proof (as standards evolve and change), and (2) ensuring its stability. Unfortunately, I'm not sure what, exactly, I should be looking for in the tech specs or the item description that can give me a good idea of how stable or future-proof my decide will be. What should I look for? Can I determine stability without having to try the device out myself? Please note: I'm not a battle-hardened power user by any means, so I'll likely be reliant on the given firmware for my router. My last router lasted me like four years, so I mostly just want something that'll cover a 500 sqft apartment in New York with minimal crashing, so that I can watch Hulu in peace. And make Skype calls. If it helps, the router models that I'm currently decided between are this ASUS one and this LinkSys one.

    Read the article

  • How to prevent eMule from jamming up the router?

    - by the searcher
    Usually, when eMule is started, after some time, I find that the router is jammed, so the internet connection on that computer stopped working, or it seemed to be waiting for some port to be freed up before it can connect to a website. This sometimes affect even other PCs or Macs using the same router. Is there a way to prevent eMule from hogging too much resource or ports? I see that there is under Options -> Connection "Max Sources/File" and a "Connection Limits - Maximum Connections". Right now I set them to really low numbers: the first to 120 and the second to 200, but what are good numbers to fill in there so that it can work well without jamming up the router or use up the network resource of the PC or Mac? Or could it be that the number of files that are "Waiting" is too high, and used up too much resource? (If so, can emule automatically limit the number to 10 or 20 to prevent using too much resource?) (This happened before on Linksys router, Netgear router, and the AT&T U-verse router.)

    Read the article

  • router gets disconnected once I terminate my SIP application

    - by TacB0sS
    Hey, Here is an interesting one, I have a SIP VoIP application which is able to register to the PBX server, and I can invite and see the user call on the callee end receiving an Invite, and on the caller end I see the Ringing response... now here is interesting part, if I close my application with out any notification to the server my router disconnects and restart, after a short while (30 - 150 sec). I could fix that if I would complete the ACK BYE process, but I'm just wondering why does my router hangs up? any ideas?

    Read the article

  • Programmatically changing wireless router settings - Netgear ideally

    - by Darvis Lombardo
    Is it possible to programmatically change settings on a Netgear wireless router using C#? I have settings that I change often and I would like to create my own interface for making those changes. Currently I navigate to the admin web page (10.0.0.1) and it prompts me for a username and password. After I authenticate I can use the web interface to change the router's configuration. If this isn't possible with Netgear, do any outher wireless routers have an API for developers? Thanks! Darvis

    Read the article

  • Setting up dynamic DNS for linked router

    - by cherrun
    I have a 'main' router that receives the internet signal from the ISP and another one in my room, connected with a cable. The main router is running its original firmware and is very limited in its features, unfortunately I can not change this router, since my phone company has some hardcoded stuff in there and the internet will only work with this router. My second router is running DD-WRT firmware. Now I need to set up dynamic DNS, so I can access my NAS machine remotely, which is connected to the second router. As mentioned, this can't be done with the main router, due to its limited features. DHCP is turned off on the second router, since it gets its IP from the main one. Is there a possibility to set up dynamic DNS on the second router, without changing any (or much) on the main router? Maybe as a side note: I live in Germany, don't know if the set up of the routers are different in other countries.

    Read the article

  • Setting up dynamic DNS for linked router

    - by cherrun
    I have a 'main' router that receives the internet signal from the ISP and another one in my room, connected with a cable. The main router is running its original firmware and is very limited in its features, unfortunately I can not change this router, since my phone company has some hardcoded stuff in there and the internet will only work with this router. My second router is running DD-WRT firmware. Now I need to set up dynamic DNS, so I can access my NAS machine remotely, which is connected to the second router. As mentioned, this can't be done with the main router, due to its limited features. DHCP is turned off on the second router, since it gets its IP from the main one. Is there a possibility to set up dynamic DNS on the second router, without changing any (or much) on the main router? Maybe as a side note: I live in Germany, don't know if the set up of the routers are different in other countries.

    Read the article

  • Router behind Router--second router (and its clients) cannot be "seen" even after both routers are D

    - by Trioke
    Couple of terminology I guess I should get out of the way for consistency's sake throughout the post: External Router/Modem - SMC 8014WG - External IP 173.32.144.134 - Internal IP 192.168.0.1 Internal Router - LinkSys WRT120N - "External" IP of 192.168.0.175 - Internal IP 192.168.1.1 - Connected via Ethernet Cable (a really long one, from the basement to the second floor) PC - IP 192.168.200 - Connected Wirelessly via WAP2 Personal. Laptop - Used to try and diagnose the problem, a 4th machine to the setup which won't be part of the final setup once everything works. The actual problem: I've tried setting the LinkySys router as a DMZ'd client on the SMC router, and then DMZ'd the actual PC on the LinkSys. So the DMZ looks like this: On the SMZ, client with IP 192.168.0.175 is DMZ'd. On the LinkSys, client with IP 192.168.1.200 is DMZ'd. No dice. I then tried port forwarding the necessary port on the SMC to the LinkSys (lets just say, port 80). Then port forwarded Port 80 on the LinkSys to the PC. Same as the DMZ scenario above, but change DMZ with port forwarding. No dice, still :(. Now here's where I went stupid--and tell me if one should never do this--I enabled both DMZ and port forwarding at the same time. I fired up Opera--my browser of choice ;)--typed in 173.32.144.134:6333 and... ... Third time is the charm they say? Well, clearly not. Otherwise I wouldn't be here ;). To diagnose the problem, I enabled "Allow remote access to the Admin panel" on the LinkSys router, and specified port 6333 as the port to use. I port forwarded port 6333 on the SMC to 192.168.0.175, and access my external IP of 173.32.144.134:6333 in hopes of seeing the Admin panel... No dice (I think I've ran out of dice by now ;)). So to see where the problem was, I connected a laptop to the SMC via LAN cable, and typed in 192.168.0.175:6333, and viola, Admin Panel access! So the problem looks like it lies with the SMC--But that's as far as I've got, I've done the port forwarding, the DMZ'ing, and I've even disabled the built-in firewall for safe measures, but nothing worked. So, here I am. Unable to connect to the PC behind the Internal router externally, and without anything to go on other than to come here and ask for the wisdom of the the superuser folks :). If any more detail is required, just ask. (Apologies in advance, if questions should never be this long winded!)

    Read the article

  • Two routers in a LAN

    - by taxi
    router A no wifi +--- pc01 +--- pc02 | +--- router B wifi +--- pc03 +--- printer In my LAN I have a modem-router (say A) (no wifi connection) acting as DHCP server, and connected to the Internet. Now, I want to add another router (say B) (with wifi connection) to the LAN, in order to connect wifi pc's and net printers. Here I would disable DCHP server functionality. Is it correct to connect router B to router A via an ethernet port? In router A I define an IP address (eg 192.168.1.100) to be assigned to router B (MAC address). I expect to see router B listed as an attached device, in router A's status, but on the contrary it is not listed.

    Read the article

  • Adding a Second Wireless Router to an Existing Wired Network

    - by KVCrawford
    I apologize ahead of time, I know this has been asked before, but I'm still having problems...maybe you guys can help. I started out with the basic instructions from the highest-voted answer at http://serverfault.com/questions/41572/adding-a-second-wireless-router-to-my-network The new Wireless router in question is a Linksys Wireless-N Gigabit Router, Model # WRT310N Here are the steps I've taken in setting it up: Plug my laptop into LAN port #2 in the new router. Nothing else is connected at this point Configure the new router to be 192.168.1.200 (the original router is 192.168.1.1, and its DHCP clients are from 192.168.1.100-x.x.x.199) Set the internet connection on the new router to "DHCP Client" Turn off the DHCP server & NAT routing on the new router Plug in a LAN cable from the original router into the LAN port #1 on the new router (NOT the WAN port, nothing is plugged in there) Reset the new router Afterwards, I try to ping 192.168.1.1 from the laptop plugged into LAN port #2 on the new router, with no response. 192.168.1.200 garners no response either. Typing "ipconfig" tells me: Autoconfiguration IP Address: 169.254.198.113 Subnet Mask: 255.255.0.0 Default Gateway: 169.254.198.113 What's going wrong? I appreciate any help!

    Read the article

  • How can I match a twitter username with angular ui router

    - by user3929999
    I need to be able to match a path like '/@someusername' with angular ui router but can't figure out the regex for it. What I have are routes like the following $stateProvider .state('home', {url:'/', templateUrl:'/template/path.html'}) .state('author', {url:'/{username:[regex-to-match-@username-here]}'}) .state('info', {url:'/:slug', templateUrl:'/template/path.html'}) .state('entry', {url:'/:type/:slug', templateUrl:'/template/path.html'}); I need a bit of regex for the 'author' route that will match @usernames. Currently, everything I try is caught by the 'entry' route.

    Read the article

  • angular-ui-router : breadcrumps ok but view ko

    - by anakin59490
    this is my app.router.js : agentRouter.config([ '$stateProvider', '$urlRouterProvider', function($stateProvider, $urlRouterProvider) { var root = { name: 'root', abstract: true, url: '', title: 'home', views: { 'header': { templateUrl: 'views/headers/header.app.html', controller: 'HeaderCtrl' }, 'body': { templateUrl: "views/root.html" }, 'footer': { templateUrl: 'views/footers/footer.app.html' } } }; var agent = { name: 'root.agent', url: '/agent', title: 'agent', views: { 'root.sidebar': { templateUrl: "views/main.sidebar.html" }, 'root.container': { templateUrl: "views/partials/agent/list.container.html" } } }; var detail = { name: 'root.agent.detail', url: '/detail/:id', title: 'agentDetail', // use for breadcrumb views: { 'root.sidebar': { templateUrl: "views/main.sidebar.html" }, 'root.container': { templateUrl: "views/partials/agent/list.chantier.html" } } }; /.../ $stateProvider.state(root); $stateProvider.state(agent); $stateProvider.state(detail); } ]); and this is my root.html : <!--Breadcrumb content--> <ul class="row breadcrumb"> <i class="glyphicon glyphicon-home" style=""></i> <li ng-repeat="state in $state.$current.path"> <a ng-href="#{{state.url.format($stateParams)}}"><span ng-bind="state.title"></span></a> <span ng-hide="$last" class=""></span> </li> </ul> <!--Sidebar content--> <div ui-view="root.sidebar">default root.sidebar</div> <!--Container content--> <div style="background-color: #f9f9f9" ui-view="root.container">default root.container</div> I can access to my "agent" page (a list of person) and my breadcrumb is right : home / agent but when i click on an item of the list i got always the same page but my breadcrumb is right : home / agent / agentDetail but in app.router.js if change detail like this : var detail = { name: 'root.detail', // référence initiale + detail (fils) url: '/agent/detail/:id', // réference utilisée dans les fichiers HTML, attention c'est la suite de l'url précédente!!! title: 'agentDetail', // référence utilisée pour le breadcump views: { 'root.sidebar': { templateUrl: "views/main.sidebar.html" }, 'root.container': { templateUrl: "views/partials/agent/list.chantier.html" } } }; i got the right page (list.chantier.xml) but the breadcrumb is false : home / agentDetail instead of home / agent / agentDetail I would like to got the right breadcrumb (home / agent / agentDetail) with the right page (list.chantier.html) when i click on an item of the agent list page (list.container.html) Thank you in advance for your help

    Read the article

  • Wired connection to windows ISC stopped working

    - by cmpickle
    I have had my Linux box connected to the internet through a Windows computer by wiring them together with a cat5 cable then the Windows is connected wireless to a router. This setup has worked since I got the Linux box but just yesterday stopped working. The changes that occurred were: I changed networking so that I was connecting the Linux box and Windows computer through a second router so during that time the Linux box went through a router to connect to the Windows computer that was still connected wireless to the first router. The Internet didn't work on the Linux box at the time they second router was involved when I removed it and directly connected the Linux box and Windows the Internet worked again. Another thing that changed was that I had disconnected my Windows computer from all network connections and deleted them to make my Ethernet work better. Also at that time my dad had I connect the Windows to a third router and changed some settings in it. After reconnecting this time the connection between the router and the windows would not establish. If anyone has any ideas as to why this is I would greatly appreciate it!

    Read the article

  • Joining two routers together, but I have no access to the second router, although I know it's IP address and Gateway

    - by JohnnyVegas
    I have temporarily moved into a rented apartment for 4 months, which has wireless. The trouble I am having is that the access points here are wifi only and no RJ45 and I need to use RJ45 to connect some equipment that I am working with. I have purchased an RT-N66U and installed Tomato (shibby ver. 1.28) and successfully replaced the existing access point, but now I want to enable the access point that I have replaced as it links wirelessly to 3 others. Can I plug in a cable from the access point to my RT-N66U and get it to access the internet via my router? I have no access to the existing wireless access point, and don't want to reset it as it's not mine. There is another router situated in the roof somewhere which I also have no access to, but it's supplying my RT-N66U internet and I most definitely have a double-nat, which although isn't the best way of doing things I am limited with what I can do. Any suggestions on routing tables, vlans etc would be helpful, but I have no experience in these fields before - but I know the tomato firmware can cater for this. My router is set to IP 10.0.1.1 and dhcp is 10.0.1.100-200 The wireless access point address was 192.168.1.2 but this was assigned by the router in the roof which has the address 192.168.1.1. There is a cable from this router going to a wall socket which I now have my RT-N66u attached to via the WAN port. I understand it's scruffy and it isn't the way to do things but I have tried to ask for the admin details but as the wireless network is looked after by a third party and nobody knows their details I am stuck with this dilemma. I could buy three wireless access points and replace the existing but this isn't what I want to do, and although I have installed plenty of DD-WRT wireless repeater bridges they simply don't work here for some unknown reason. The phone line here is very noisy too and I don't have the rights to install ADSL in a building that isn't mine, and 3G coverage isn't good enough either. Thanks for your time

    Read the article

  • How to gain admin privileges on D-Link router if my isp is not allowing me to do so?

    - by Fischer
    So I switched to new ISP yesterday, they gave me a D-Link router, can't use my old router. I want to change the wireless password, went to 192.168.1.1, I can login with the the username and password user user, but not as admin. On the catalog it says that the default username and password are admin admin, tried that didn't work. Tried admin and no pass, tried many combinations, none worked. I asked some other users and they said that the isp is blocking the users from logging in as admins, and blocking the reset button, and said that there's a hack where you do something like: cmd telnet "router ip" and do something like dumpcfg. Could you please give a better explanation on how to gain admin privileges on your own router if your isp is not letting you do so by default?

    Read the article

  • How to recover a Linksys WRT54GL router that has a blinking green power LED and no response from the

    - by Peter Mounce
    I was flashing the router with the Tomato firmware, but something went wrong; I'm not sure what. Now, the router responds to ping at 192.168.1.1 (my Mac's on a static IP 192.168.1.21), but the web-interface doesn't come up. I have read that this situation is recoverable in a [couple of places][2], but I haven't been having much success and so I wondered whether anyone could help. From my Mac (OSX 10.5) I have tried to tftp a new vanilla-Linksys firmware to the router and reboot; according to the trace, this sends it but the router behaves no differently after a reboot. I've read that if boot_wait is turned on, I'll have an easier time, but I haven't been able to find any instructions that tell me how I can tell whether I did this or not (I don't think I have, but I might have, when I tinkered the first time months ago - the router has worked since then, though). I have found a couple of references to [something called JTAG][3], which seems like some kind of [homebrew diagnostic cable thing][4], but that's a little beyond my ken. Happy to try it, with muppet-level instructions, though (I do software, not hardware!). So, I'm at a bit of a loss, really, and wondered whether anyone could provide me with the route (ha. ha.) out of this mess? Hm, I can't post all the links I wanted to until I have some more reputation.

    Read the article

  • Why does changing the physical socket on your router cause delays?

    - by Josh Browning
    My question involves the delays involved with changing which physical socket your ethernet cable is connected to. I am aware that if you are connected to a router on a network and then change which physical socket on that router you are using you will gain very small additional delays initially. However I am curious as to what causes these delays. I originally thought it was to do with the infromation stored in the routing table and whether that was allocated to a specific socket on the router or not. Although, if your IP address is the same then I don't understand why there would be delays because I would of assumed that any information within the router was linked to an IP address rather than a physical socket.

    Read the article

  • Is it safe to leave a broadband router running 24/7?

    - by Anirvan
    My father-in-law's ISP warned him in the strictest possible terms to physically turn off his rented Nokia Siemens C2110 PPPoE broadband router when not in use. Everyone I know leaves their broadband router on all the time, and I've never heard of any negative impacts. Is leaving a consumer broadband router running 24/7 really problematic? Is the ISP in question being ridiculously paranoid?

    Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >