Search Results

Search found 4296 results on 172 pages for 'serial ports'.

Page 13/172 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Printer ports missing from network printers, Windows 7 laptops

  - by pigeon

  Have an odd issue where users take their laptops home and back into the office with network printers that get mapped via a login script but fail to print. After tracking down a user with this problem I found that the print driver had no ports available to it. We've mapped network printers for this site all the time but only since the introduction of the Konica Minolta C220 Bizhub has this issue cropped up. The issue occurs with Windows 7 users and it takes them 2 /3 reboots to have the ports recreated. Should I be looking at the server for this or at the Windows 7 machines?

  Read the article

• Dell XPS 420: Turning computer on, video ports showing static

  - by Roy Rico

  I have a Dell XPS 420 which i recently upgraded with a EVGA GTX 550TI and a 80GB SSD Drive. I converted this machine into a home theater PC. Which I've always had on. The computer wasn't responding, and so i restarted it and when it started, video ports showing static. I was getting static on my TV thru both DVI ports and the mini HDMI port. I assumed my video card had gone bad, but i completely replaced it and still the same behavior is occurring. I do not know how to diagnosis this issue. Any thoughts?

  Read the article

• Is opening ports in the firewall bad?

  - by Steven

  From what little I know about networking, opening ports lets external data get sent in. But how that data is handled is entirely up to the applications running on my machine. So if I'm not running any malicious applications, there should be nothing wrong with disabling the firewall, right? Also, how do applications work when ports aren't forwarded? For example, I need to forward port TCP 6112 to host Blizzard games, but I've heard that HTTP uses port 80, but I haven't forwarded that port, yet Firefox still works. Btw I'm using Windows Vista.

  Read the article

• squid transparent proxy on all ports

  - by Yves Richard

  I have setup squid as a transparent proxy by redirecting port 80 to the native squid port 3128. I know there are issues with getting secure ports like ssl and imaps to go though the proxy but can I redirect all other ports through the proxy as well. I am trying to get a better idea of bandwidth usage. I have setup iptables to log usage and i am getting most traffic going into the related/established rule. I am trying to determine the origins of this traffic by sending traffic to squid for more detailed logging.

  Read the article

• Open ports for Apache Tomcat-7.0.32 on Linux Mandriva

  - by ivanov-void

  I installed Apache Tomcat-7.0.32 on Linux Mandriva and I want to make it accessible. for this I need to open ports in iptables. I added the following rules- iptables -A INPUT -p tcp -m tcp --dport 8081 --syn -j ACCEPT iptables -A INPUT -p tcp -m tcp --dport 8010 --syn -j ACCEPT iptables -A INPUT -p tcp -m tcp --dport 8444 --syn -j ACCEPT iptables -A INPUT -p tcp -m tcp --dport 8006 --syn -j ACCEPT then save and restart iptables - /etc/init.d/iptables save /etc/init.d/iptables restart verify, that ports is open - netstat -tulpn | less I am running command - netstat-ntpl | grep java and see - When I disable the firewall, I see the start page of the server on request - http://server_ip:8081/ When enable - server not accessible from outside. In what may be the cause? I would be most grateful for the information! Thank you!

  Read the article

• No blocked ports on internal interface of ASA

  - by blsub6

  I have a cisco ASA 5505 with three interfaces: Internal (100), DMZ (50) and External (0). The internal has a IPSEC VPN tunnel to my internal network I couldn't log in to my domain because of all of the port restrictions and such. I tried monitoring the traffic through the interface, seeing what it's blocking and then unblocking those ports but even then it didn't work completely correctly I finally just added a rule to permit any ip traffic from any network to any network on the internal interface and, of course, it worked fine But is that good security practice? Should I be blocking ports on an interface that's internal and over a VPN with the highest security level?

  Read the article

• Python: how to calculate data received and send between two ipaddresses and ports [closed]

  - by ramdaz

  I guess it's socket programming. But I have never done socket programming expect for running the tutorial examples while learning Python. I need some more ideas to implement this. What I specifically need is to run a monitoring program of a server which will poll or listen to traffic being exchange from different IPs across different popular ports. For example, how do I get data received and sent through port 80 of 192.168.1.10 and 192.168.1.1 ( which is the gateway). I checked out a number of ready made tools like MRTG, Bwmon, Ntop etc but since we are looking at doing some specific pattern studies, we need to do data capturing within the program. Idea is to monitor some popular ports and do a study of network traffic across some periods and compare them with some other data. We would like to figure a way to do all this with Python....

  Read the article

• Need Assistance on ASUS K55V USB ports not working

  - by Pascal Schilling

  I have a K55V ASUS laptop, W7 Home (64bit). Whenever I try to use a mouse (or any other USB device), it doesn't work because of a driver problem. The automatic update tries to update the driver and requires me to reboot directly after. It doesn't work. Windows update then wants to re-attempt the update and then I have to reboot (etc). Now, after 10 tries it still doesn't work. Can some one help me out on this? No USB ports work at the moment, it has 2 USB 3.0 ports and 1 USB 2.0 port.

  Read the article

• Block all ports except SSH/HTTP in ipchains and iptables

  - by user198003

  How can I block all ports except ssh (port 22) httpd (port 80) using iptables and iphains?

  Read the article

• Teaming/Spanning Switch Ports

  - by KTech

  I like to team NICs on my servers. Since most workstations are giga-bit anymore I want to provide my servers a bit more bandwidth. I've read various things that say I am/am not supposed to bond the ports on the switch. I see benefit in doing it as I'm not sure how the switch ARP table handles the same MAC address on multiple ports. Suggestions on the "ideal" way to do it? If it matters, I have mix (various locations) of Dell and HP, web managed, Layer 2 switches. Servers are mostly Dell with Broadcom NICs.

  Read the article

• Redirect all ports to my server in a simple way

  - by Dorian

  I have a server with SSH access (on port 22 and 443). My ISP block everything except ports 80 and 443. I there a simple way to make everything go to my server (via SSH) then return the response via the same SSH connection, but in a way I can use all the ports in my client. Like : Me ? SSH connection ? My server ? request ? Server ? My server ? Me It's like a VPN but I don't have any port available for a VPN (443 is already taken by SSH).

  Read the article

• Is there a way to expose ports when the three default firewalls were disabled

  - by Nactus

  I think I disabled the three firewalls that come with FreeBSD (just for experimentation purposes). I checked the modules that load with the kernel (using "kldstat"). The only modules that load are: kernel -- ng_socket.ko, netgraph.ko, ng_mppc.ko and rc4.ko). I'd like to know what module is still blocking my ports now. After removing all firewall options from the rc.file and re-compiling the kernel without the pf option (or any firewall for that matter), I can't still open ports freely. How does it work exactly? Thanks.

  Read the article

• USB To Serial under OpenSuse 11.3

  - by Lars

  I have a LogiLink USB-To-Serial adapter. This has the PL2303 chip inside. When I insert the device: [26064.927083] usb 7-1: new full speed USB device using uhci_hcd and address 9 [26065.076090] usb 7-1: New USB device found, idVendor=067b, idProduct=2303 [26065.076099] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26065.076105] usb 7-1: Product: USB-Serial Controller [26065.076110] usb 7-1: Manufacturer: Prolific Technology Inc. [26065.079181] pl2303 7-1:1.0: pl2303 converter detected [26065.091296] usb 7-1: pl2303 converter now attached to ttyUSB0 So the device is recognized and the converter is attached to ttyUSB0. When I do screen /dev/ttyUSB0 9600 I get the error: bash: /dev/ttyUSB0: Permission denied So I went looking in the file permissions. ls -l from the /dev folder reports: crw-rw---- 1 root dialout 188, 0 2011-04-26 15:47 ttyUSB0 I added my user lars to the dialout group. When I use the commands groups under lars it shows that I'm in the group. Though I still recieve the permissions denied error, as lars, and as root. I'm trying to connect to a console cable to configure some Cisco switches. My OS is OpenSuse 11.3 x86_64 with kernel version 2.6.34.7-0.7-desktop.

  Read the article

• USB To Serial under OpenSuse 11.3

  - by Exsisto

  I have a LogiLink USB-To-Serial adapter. This has the PL2303 chip inside. When I insert the device: [26064.927083] usb 7-1: new full speed USB device using uhci_hcd and address 9 [26065.076090] usb 7-1: New USB device found, idVendor=067b, idProduct=2303 [26065.076099] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26065.076105] usb 7-1: Product: USB-Serial Controller [26065.076110] usb 7-1: Manufacturer: Prolific Technology Inc. [26065.079181] pl2303 7-1:1.0: pl2303 converter detected [26065.091296] usb 7-1: pl2303 converter now attached to ttyUSB0 So the device is recognized and the converter is attached to ttyUSB0. When I do screen /dev/ttyUSB0 9600 I get the error: bash: /dev/ttyUSB0: Permission denied So I went looking in the file permissions. ls -l from the /dev folder reports: crw-rw---- 1 root dialout 188, 0 2011-04-26 15:47 ttyUSB0 I added my user lars to the dialout group. When I use the commands groups under lars it shows that I'm in the group. Though I still recieve the permissions denied error, as lars, and as root. I'm trying to connect to a console cable to configure some Cisco switches. My OS is OpenSuse 11.3 x86_64 with kernel version 2.6.34.7-0.7-desktop.

  Read the article

• COM port on VirtualBox, XP

  - by Alex Farber

  I am using Sun VirtualBox v. 3.1.4 on WinXP. Host OS is also WinXP. In the Host Machine settings, Serial Ports, Port 1, I set: Enable Serial Port Port Number: COM1 Port Mode: Host Device Port File/Path: COM1 In the Host OS Device Manager I don't see COM1 port. What is wromg?

  Read the article

• How can I login (send text) with minicom?

  - by Travis

  I am attempting to login from a Linux client to a set top box running Linux via a USB to serial cable. When I power on the device, I can see the init messages scroll past, and I get to the login prompt, like this: (none) login: but I cannot login. The cursor stops flashing as if it is receiving input, but there is no response. My serial port setup is: Device: /dev/ttyUSB0 Bps: 115200 8N1 Hardware Flow Control: Yes Software Flow Control: No Any help would be greatly appreciated!

  Read the article

• NAT, iptables and problematic ports

  - by Rajie

  I am building a small office network with virtual machines. My schema is this: Computer A: gateway, ip 1.1.1.1, iptables used for NAT [eth0=public internet dhcp, dhcp; eth1=gateway] Computer B: client, ip 1.1.1.2, using gateway from Computer A. NAT is working, and Computer B can access the internet using the A's gateway. I redirected some incoming ports from A to B (for instance, if A receives a request to port 80, it goes automatically to Computer B's Apache). The thing is that I do not really understand how to open/close ports for Computer B from Computer A. I know how to close a port: iptables -A INPUT -p tcp --dport 80 -j DROP And it will refuse all incoming (not output) connections to port 80. However, this works for main interface eth0. I tried to, for instance, drop ingoing and outgoing connections for Computer B, port 80: iptables -A FORWARD -i eth1 -o eth0 -p tcp --dport 80 -j DROP iptables -A FORWARD -i eth0 -o eth1 -p tcp --dport 80 -j DROP But it does not work. And I cannot figure out what I am doing wrong. Any clue?

  Read the article

• fail2ban block ports rules iptable

  - by J Spen

  I just installed Ubuntu Server 14.04 and don't have much experience with IPtables. I am trying to get a basic setup going where I only accept SSH connections on port 22 and 2222. I actually have that working with no problem using fail2ban ssh. Then I wanted to block all other ports except 423 and 4242 but either method of DROPing all connections that are not listed seems not to work and it blocks me out of everything. Below is the setup that works: -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A fail2ban-ssh -j RETURN I tried to change it either to: -P INPUT DROP -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A fail2ban-ssh -j RETURN or: -P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N fail2ban-ssh -A INPUT -p tcp -m multiport --dports 22,2222 -j fail2ban-ssh -A INPUT -j DROP -A fail2ban-ssh -j RETURN I have noticed that the rules for fail2ban-ssh are automatically added to my iptables on boot because if I save them with iptables-persistant they are entered twice. How do I go about blocking everything accept those 2 ports using fail2ban? Is it a bad fail2ban configuration or do I need to add the fail2ban-ssh -j Return somewhere else in my code.

  Read the article

• Installing and running two postgresql versions on different ports (or two instances of same server)

  - by Andrius

  I have postgresql 9.1 installed on my machine (Ubuntu). I need another postgresql server that would run next to the old one. Exact version does not matter, but I'm thinking of using 9.2 version. How could I properly install and run another postgresql version without screwing old one (like upgrading). So those versions would run independently on different ports. Old one on 5432 and new one on 5433 for example. The reason I need this is for two OpenERP versions databases. If I run two OpenERP servers (with different versions) on single postgresql port, it crashes because new OpenERP version detects old versions database and tries to run it, but it crashes because it uses another schemes. P.S or maybe I could just run same postgresql server on two ports? Update So far I tried this: /usr/lib/postgresql/9.1/bin/pg_ctl initdb -D main2 It created new cluster. I changed port to 5433 in new clusters directory postgresql.conf file. Then ran this: /usr/lib/postgresql/9.1/bin/pg_ctl -D main2 -l logfile start I got response server starting. But when I tried to enter new cluster's template database with: psql template1 -p 5433 I got this error: psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5433"? Also now when I try to stop server with: /usr/lib/postgresql/9.1/bin/pg_ctl -D main2 -l logfile start I get this error: pg_ctl: PID file "main2/postmaster.pid" does not exist Is server running? So I don't understand if server is running and what I'm missing here? Update Found what was wrong. Stupid me. I didn't notice that when I changed port in .conf file, that line was commented already. So actually I didn't change anything first time, but thought I did and it used default 5432 port.

  Read the article

• How to limit reverse SSH tunelling ports?

  - by funktku

  We have a public server which accepts SSH connections from multiple clients behind firewalls. Each of these clients create a Reverse SSH tunnel by using the ssh -R command from their web servers at port 80 to our public server. The destination port(at the client side) of the Reverse SSH Tunnel is 80 and the source port(at public server side) depends on the user. We are planning on maintaining a map of port addresses for each user. For example, client A would tunnel their web server at port 80 to our port 8000; client B from 80 to 8001; client C from 80 to 8002. Client A: ssh -R 8000:internal.webserver:80 clienta@publicserver Client B: ssh -R 8001:internal.webserver:80 clientb@publicserver Client C: ssh -R 8002:internal.webserver:80 clientc@publicserver Basically, what we are trying to do is bind each user with a port and not allow them to tunnel to any other ports. If we were using the forward tunneling feature of SSH with ssh -L, we could permit which port to be tunneled by using the permitopen=host:port configuration. However, there is no equivalent for reverse SSH tunnel. Is there a way of restricting reverse tunneling ports per user?

  Read the article

• serial port close hangs in compact frame work 3.5

  - by ananda

  I have developed the application for windows mobile 5.0 and .net compact framework 2.0 sp2. This application communicates to the hardware device using serial port. This application works fine in windows mobile 5.0 based PDAs. I have handled data received event to get the data from serial port. But when I run my application on windows mobile 6.1 and .net compact framework 3.5, my application hangs on serial port close API call. There are many workarounds mentioned in the .net compact framework blog like (closing the com port on different thread, opening the port in the beginning of the application and close once application exists, polling for data instead of event handling), but nothing is working consistently.

  Read the article

• how do i release the auto increment serial nos that are missing

  - by mmdel

  i have a table with auto increment field and i am using transactions when inserting new data. now i find there are a few serial nos that are missing. suppose the last serial no was 475, now when i insert new row, the serial allotted to it is 481. how do i correct this. table_A fields ID(Auto increment),Name,Address table_B fields ID(Auto increment FK TO table_A ID),Tel,Fax,Email,Salesman table_C fields ID(Auto increment FK TO table_A ID),monthly_commitment mysql_query(BEGIN); $a = mysql_query("INSERT INTO table_A VALUES('','name','address')"); $b = mysql_query("INSERT INTO table_B VALUES('','tel','fax','email','salesman')"); $b = mysql_query("INSERT INTO table_C VALUES('','monthly commitment')"); if(($a) && ($b) && ($c)){mysql_query("COMMIT");} else {mysql_query("ROLLBACK");}

  Read the article

• Read Core data in Serial Queue for iPhone app

  - by user1277209

  I have an app which uses Core data and the values are fetched from a link on internet. This runs absolutely fine when I am creating a serial queue in AppDelegate and I am not facing any problem with the same. Now, when I am trying to re-create similar scenario in a UITableViewController and executing the same in a serial queue but when the control reaches NSError *error; NSArray *match = [context executeFetchRequest:fetchRequest error:&error]; execution control disappears and then this code remains in the execution till eternity. Can anyone help me with what exactly is wrong here? FYI, I am passing the same ManagedObjectContext to the serial queue.

  Read the article

• Why is my IMAP port not showing as open ( yet it works? )

  - by Leo

  Ive recently setup Postfix and Dovecot IMAP on a Debian Lenny box. Sending to this domain works fine and reading the email via IMAP works fine too. I'm curious though as to why when running nmap, port 10143 is not shown as open. nmap -sS -O 127.0.0.1 Starting Nmap 4.62 ( http://nmap.org ) at 2011-11-26 21:30 GMT Interesting ports on localhost.localdomain (127.0.0.1): Not shown: 1711 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 80/tcp open http 3306/tcp open mysql Am I missing something with NMAP? Thanks Leo

  Read the article

• Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

  - by thecraic

  I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >