Search Results

Search found 1770 results on 71 pages for 'steve'.

Page 13/71 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Setting Up Oracle Database's Oracle Text

  Steve Callan walks through some Oracle Text setup steps and working examples of different index types used by Oracle Text.

  Read the article

• My error with upgrading 4.0 to 4.2- What NOT to do...

  - by Steve Tunstall

  Last week, I was helping a client upgrade from the 2011.1.4.0 code to the newest 2011.1.4.2 code. We downloaded the 4.2 update from MOS, upload and unpacked it on both controllers, and upgraded one of the controllers in the cluster with no issues at all. As this was a brand-new system with no networking or pools made on it yet, there were not any resources to fail back and forth between the controllers. Each controller had it's own, private, management interface (igb0 and igb1) and that's it. So we took controller 1 as the passive controller and upgraded it first. The first controller came back up with no issues and was now on the 4.2 code. Great. We then did a takeover on controller 1, making it the active head (although there were no resources for it to take), and then proceeded to upgrade controller 2. Upon upgrading the second controller, we ran the health check with no issues. We then ran the update and it ran and rebooted normally. However, something strange then happened. It took longer than normal to come back up, and when it did, we got the "cluster controllers on different code" error message that one gets when the two controllers of a cluster are running different code. But we just upgraded the second controller to 4.2, so they should have been the same, right??? Going into the Maintenance-->System screen of controller 2, we saw something very strange. The "current version" was still on 4.0, and the 4.2 code was there but was in the "previous" state with the rollback icon, as if it was the OLDER code and not the newer code. I have never seen this happen before. I would have thought it was a bad 4.2 code file, but it worked just fine with controller 1, so I don't think that was it. Other than the fact the code did not update, there was nothing else going on with this system. It had no yellow lights, no errors in the Problems section, and no errors in any of the logs. It was just out of the box a few hours ago, and didn't even have a storage pool yet. So.... We deleted the 4.2 code, uploaded it from scratch, ran the health check, and ran the upgrade again. once again, it seemed to go great, rebooted, and came back up to the same issue, where it came to 4.0 instead of 4.2. See the picture below.... HERE IS WHERE I MADE A BIG MISTAKE.... I SHOULD have instantly called support and opened a Sev 2 ticket. They could have done a shared shell and gotten the correct Fishwork engineer to look at the files and the code and determine what file was messed up and fixed it. The system was up and working just fine, it was just on an older code version, not really a huge problem at all. Instead, I went ahead and clicked the "Rollback" icon, thinking that the system would rollback to the 4.2 code.   Ouch... What happened was that the system said, "Fine, I will delete the 4.0 code and boot to your 4.2 code"... Which was stupid on my part because something was wrong with the 4.2 code file here and the 4.0 was just fine.  So now the system could not boot at all, and the 4.0 code was completely missing from the system, and even a high-level Fishworks engineer could not help us. I had messed it up good. We could only get to the ILOM, and I had to re-image the system from scratch using a hard-to-get-and-use FishStick USB drive. These are tightly controlled and difficult to get, almost always handcuffed to an engineer who will drive out to re-image a system. This took another day of my client's time.  So.... If you see a "previous version" of your system code which is actually a version higher than the current version... DO NOT ROLL IT BACK.... It did not upgrade for a very good reason. In my case, after the system was re-imaged to a code level just 3 back, we once again tried the same 4.2 code update and it worked perfectly the first time and is now great and stable.  Lesson learned.  By the way, our buddy Ryan Matthews wanted to point out the best practice and supported way of performing an upgrade of an active/active ZFSSA, where both controllers are doing some of the work. These steps would not have helpped me for the above issue, but it's important to follow the correct proceedure when doing an upgrade. 1) Upload software to both controllers and wait for it to unpack 2) On controller "A" navigate to configuration/cluster and click "takeover" 3) Wait for controller "B" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 4) Wait for controller "B" to apply the update and finish rebooting 5) Login to controller "B", navigate to configuration/cluster and click "takeover" 6) Wait for controller "A" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 7) Wait for controller "A" to apply the update and finish rebooting 8) Login to controller "B", navigate to configuration/cluster and click "failback"

  Read the article

• Local Business Listing Dashboard

  - by Steve

  I operate a website for a West Australian company, and the company has listings in local business directory websites. Currently we are listed in: www.HotFrog.com.au www.Google.com/Places www.TrueLocal.com.au www.StartLocal.com.au www.localstore.com.au www.communityguide.com.au www.yelp.com.au www.aussieweb.com.au Do you know of any method for examining account stats (profile views, profile clicks etc) within a dashboard, so I can see at a glance how each of our listings is going? I'd be happy to build a dashboard if necessary, but I'm not confident I currently have the skills to accurately display only the correct concise information. Would I use iframes? See if they have APIs? Is there a dashboard framework I could use?

  Read the article

• Handy Generic JQuery Functions

  - by Steve Wilkes

  I was a bit of a late-comer to the JQuery party, but now I've been using it for a while it's given me a host of options for adding extra flair to the client side of my applications. Here's a few generic JQuery functions I've written which can be used to add some neat little features to a page. Just call any of them from a document ready function. Apply JQuery Themeroller Styles to all Page Buttons   The JQuery Themeroller is a great tool for creating a theme for a site based on colours and styles for particular page elements. The JQuery.UI library then provides a set of functions which allow you to apply styles to page elements. This function applies a JQuery Themeroller style to all the buttons on a page - as well as any elements which have a button class applied to them - and then makes the mouse pointer turn into a cursor when you mouse over them: function addCursorPointerToButtons() {     $("button, input[type='submit'], input[type='button'], .button") .button().css("cursor", "pointer"); } Automatically Remove the Default Value from a Select Box   Required drop-down select boxes often have a default option which reads 'Please select...' (or something like that), but once someone has selected a value, there's no need to retain that. This function removes the default option from any select boxes on the page which have a data-val-remove-default attribute once one of the non-default options has been chosen: function removeDefaultSelectOptionOnSelect() {     $("select[data-val-remove-default='']").change(function () {         var sel = $(this);         if (sel.val() != "") { sel.children("option[value='']:first").remove(); }     }); } Automatically add a Required Label and Stars to a Form   It's pretty standard to have a little * next to required form field elements. This function adds the text * Required to the top of the first form on the page, and adds *s to any element within the form with the class editor-label and a data-val-required attribute: function addRequiredFieldLabels() {     var elements = $(".editor-label[data-val-required='']");     if (!elements.length) { return; }     var requiredString = "<div class='editor-required-key'>* Required</div>";     var prependString = "<span class='editor-required-label'> * </span>"; var firstFormOnThePage = $("form:first");     if (!firstFormOnThePage.children('div.editor-required-key').length) {         firstFormOnThePage.prepend(requiredString);     }     elements.each(function (index, value) { var formElement = $(this);         if (!formElement.children('span.editor-required-label').length) {             formElement.prepend(prependString);         }     }); } I hope those come in handy :)

  Read the article

• Recent update killed unity 3d launcher

  - by Steve

  I am scratching my head on this one, a lot of things are still new to me. I updated 126 packages just now through the update manager, and upon reboot everything works fine except the unity launcher. It's just a dark space. The dash still works, as does the top panel and docky. When I try: unity --replace I end up with this and then an indefinite hang: (compiz:3689): GConf-CRITICAL **: gconf_client_add_dir: assertion `gconf_valid_key (dirname, NULL)' failed WARN 2012-09-23 02:18:29 unity.favorites FavoriteStoreGSettings.cpp:139 Unable to load GDesktopAppInfo for 'ubiquity-gtkui.desktop' WARN 2012-09-23 02:18:30 unity.favorites FavoriteStoreGSettings.cpp:139 Unable to load GDesktopAppInfo for 'ubuntuone-installer.desktop' ERROR 2012-09-23 02:18:30 unity.launcher.trashlaunchericon TrashLauncherIcon.cpp:62 Could not create file monitor for trash uri: Operation not supported Initializing unityshell options...done WARN 2012-09-23 02:18:31 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-writer.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-09-23 02:18:31 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-calc.desktop' is using a deprecated format for its actions that will be dropped soon. WARN 2012-09-23 02:18:31 unity.libindicator <unknown>:0 Desktop file '/usr/share/applications/libreoffice-impress.desktop' is using a deprecated format for its actions that will be dropped soon. Setting Update "main_menu_key" Setting Update "run_key" Unfortunately I cannot make heads or tails of this. Anyone, please help?

  Read the article

• (Unity)Getting a mirrored mesh from my data structure

  - by Steve

  Here's the background: I'm in the beginning stages of an RTS game in Unity. I have a procedurally generated terrain with a perlin-noise height map, as well as a function to generate a river. The problem is that the graphical creation of the map is taking the data structure of the map and rotating it by 180 degrees. I noticed this problem when i was creating my rivers. I would set the River's height to flat, and noticed that the actual tiles that were flat in the graphical representation were flipped and mirrored. Here's 3 screenshots of the map from different angles: http://imgur.com/a/VLHHq As you can see, if you flipped (graphically) the river by 180 degrees on the z axis, it would fit where the terrain is flattened. I have a suspicion it is being caused by a misunderstanding on my part of how vertices work. Alas, here is a snippet of the code that is used: This code here creates a new array of Tile objects, which hold the information for each tile, including its type, coordinate, height, and it's 4 vertices public DTileMap (int size_x, int size_y) { this.size_x = size_x; this.size_y = size_y; //Initialize Map_Data Array of Tile Objects map_data = new Tile[size_x, size_y]; for (int j = 0; j < size_y; j++) { for (int i = 0; i < size_x; i++) { map_data [i, j] = new Tile (); map_data[i,j].coordinate.x = (int)i; map_data[i,j].coordinate.y = (int)j; map_data[i,j].vertices[0] = new Vector3 (i * GTileMap.TileMap.tileSize, map_data[i,j].Height, -j * GTileMap.TileMap.tileSize); map_data[i,j].vertices[1] = new Vector3 ((i+1) * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j) * GTileMap.TileMap.tileSize); map_data[i,j].vertices[2] = new Vector3 (i * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j-1) * GTileMap.TileMap.tileSize); map_data[i,j].vertices[3] = new Vector3 ((i+1) * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j-1) * GTileMap.TileMap.tileSize); } } This code sets the river tiles to height 0 foreach (Tile t in map_data) { if (t.realType == "Water") { t.vertices[0].y = 0f; t.vertices[1].y = 0f; t.vertices[2].y = 0f; t.vertices[3].y = 0f; } } And below is the code to generate the actual graphics from the data: public void BuildMesh () { DTileMap.DTileMap map = new DTileMap.DTileMap (size_x, size_z); int numTiles = size_x * size_z; int numTris = numTiles * 2; int vsize_x = size_x + 1; int vsize_z = size_z + 1; int numVerts = vsize_x * vsize_z; // Generate the mesh data Vector3[] vertices = new Vector3[ numVerts ]; Vector3[] normals = new Vector3[numVerts]; Vector2[] uv = new Vector2[numVerts]; int[] triangles = new int[ numTris * 3 ]; int x, z; for (z=0; z < vsize_z; z++) { for (x=0; x < vsize_x; x++) { normals [z * vsize_x + x] = Vector3.up; uv [z * vsize_x + x] = new Vector2 ((float)x / size_x, 1f - (float)z / size_z); } } for (z=0; z < vsize_z; z+=1) { for (x=0; x < vsize_x; x+=1) { if (x == vsize_x - 1 && z == vsize_z - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x - 1, z - 1].vertices [3]; } else if (z == vsize_z - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x, z - 1].vertices [2]; } else if (x == vsize_x - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x - 1, z].vertices [1]; } else { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x, z].vertices [0]; vertices [z * vsize_x + x+1] = DTileMap.DTileMap.map_data [x, z].vertices [1]; vertices [(z+1) * vsize_x + x] = DTileMap.DTileMap.map_data [x, z].vertices [2]; vertices [(z+1) * vsize_x + x+1] = DTileMap.DTileMap.map_data [x, z].vertices [3]; } } } } for (z=0; z < size_z; z++) { for (x=0; x < size_x; x++) { int squareIndex = z * size_x + x; int triOffset = squareIndex * 6; triangles [triOffset + 0] = z * vsize_x + x + 0; triangles [triOffset + 2] = z * vsize_x + x + vsize_x + 0; triangles [triOffset + 1] = z * vsize_x + x + vsize_x + 1; triangles [triOffset + 3] = z * vsize_x + x + 0; triangles [triOffset + 5] = z * vsize_x + x + vsize_x + 1; triangles [triOffset + 4] = z * vsize_x + x + 1; } } // Create a new Mesh and populate with the data Mesh mesh = new Mesh (); mesh.vertices = vertices; mesh.triangles = triangles; mesh.normals = normals; mesh.uv = uv; // Assign our mesh to our filter/renderer/collider MeshFilter mesh_filter = GetComponent<MeshFilter> (); MeshCollider mesh_collider = GetComponent<MeshCollider> (); mesh_filter.mesh = mesh; mesh_collider.sharedMesh = mesh; calculateMeshTangents (mesh); BuildTexture (map); } If this looks familiar to you, its because i got most of it from Quill18. I've been slowly adapting it for my uses. And please include any suggestions you have for my code. I'm still in the very early prototyping stage.

  Read the article

• 'Invalid or corrupt kernel image' error while booting from USB stick

  - by steve

  I got the Ubuntu 11.10 32-bit edition and i used Unetbootin to write the ISO to a usb stick.After that i tried to boot from the stick,having changed the BIOS boot settings,and when the first interface shows up with the choices of istallation,whatever choice i select i got the message"invalid or corrupt kernel image".I use a netbook with windows 7 on it.I tried different usb sticks but same again.I also tried Universal USB installer instead of Unetbootin but same again.Any idea of what happens?I am using ASUS 1000H.The USB doesn't work in one more PC i tried to,but i also tried a second USB to both of the two computers and same again. I downloaded the ISO image once again and follow the same procedure but same again

  Read the article

• What Is The Relationship Between Software Architect and Team Member

  - by Steve Peng

  I work for a small company which has less than 100 persons. Several months ago, this company offered me position of SA and I accepted. There are three teams in this company, and I work for one of them. This is the first time I work as a SA. During the past months, I find I don't have any power of management, I even can't let the team member do things (coding-related) in the way which is correct and more efficient. The team members argue with me on very very basic technical questions and I have to explain to them again and again. Though some members did take my advice, other members stubbornly program in their way which frequently proved wrong finally. Recently I feel a little tired and confused. I wonder what is correct relationship between a Software Architect and team members including the team leader? Besides, is software architect also leaded by the Team Leader?

  Read the article

• Data Source Security Part 5

  - by Steve Felts

  If you read through the first four parts of this series on data source security, you should be an expert on this focus area.  There is one more small topic to cover related to WebLogic Resource permissions.  After that comes the test, I mean example, to see with a real set of configuration parameters what the results are with some concrete values. WebLogic Resource Permissions All of the discussion so far has been about database credentials that are (eventually) used on the database side.  WLS has resource credentials to control what WLS users are allowed to access JDBC resources.  These can be defined on the Policies tab on the Security tab associated with the data source.  There are four permissions: “reserve” (get a new connection), “admin”, “shrink”, and reset (plus the all-inclusive “ALL”); we will focus on “reserve” here because we are talking about getting connections.  By default, JDBC resource permissions are completely open – anyone can do anything.  As soon as you add one policy for a permission, then all other users are restricted.  For example, if I add a policy so that “weblogic” can reserve a connection, then all other users will fail to reserve connections unless they are also explicitly added.  The validation is done for WLS user credentials only, not database user credentials.  Configuration of resources in general is described at “Create policies for resource instances” http://docs.oracle.com/cd/E24329_01/apirefs.1211/e24401/taskhelp/security/CreatePoliciesForResourceInstances.html.  This feature can be very useful to restrict what code and users can get to your database. There are the three use cases: API Use database credentials User for permission checking getConnection() True or false Current WLS user getConnection(user,password) False User/password from API getConnection(user,password) True Current WLS user If a simple getConnection() is used or database credentials are enabled, the current user that is authenticated to the WLS system is checked. If database credentials are not enabled, then the user and password on the API are used. Example The following is an actual example of the interactions between identity-based-connection-pooling-enabled, oracle-proxy-session, and use-database-credentials. On the database side, the following objects are configured.- Database users scott; jdbcqa; jdbcqa3- Permission for proxy: alter user jdbcqa3 grant connect through jdbcqa;- Permission for proxy: alter user jdbcqa grant connect through jdbcqa; The following WebLogic Data Source objects are configured.- Users weblogic, wluser- Credential mapping “weblogic” to “scott”- Credential mapping "wluser" to "jdbcqa3"- Data source descriptor configured with user “jdbcqa”- All tests are run with Set Client ID set to true (more about that below).- All tests are run with oracle-proxy-session set to false (more about that below). The test program:- Runs in servlet- Authenticates to WLS as user “weblogic” Use DB Credentials Identity based getConnection(scott,***) getConnection(weblogic,***) getConnection(jdbcqa3,***) getConnection()  true  true Identity scottClient weblogicProxy null weblogic fails - not a db user User jdbcqa3Client weblogicProxy null Default user jdbcqaClient weblogicProxy null  false  true scott fails - not a WLS user User scottClient scottProxy null jdbcqa3 fails - not a WLS user User scottClient scottProxy null  true  false Proxy for scott fails weblogic fails - not a db user User jdbcqa3Client weblogicProxy jdbcqa Default user jdbcqaClient weblogicProxy null  false  false scott fails - not a WLS user Default user jdbcqaClient scottProxy null jdbcqa3 fails - not a WLS user Default user jdbcqaClient scottProxy null If Set Client ID is set to false, all cases would have Client set to null. If this was not an Oracle thin driver, the one case with the non-null Proxy in the above table would throw an exception because proxy session is only supported, implicitly or explicitly, with the Oracle thin driver. When oracle-proxy-session is set to true, the only cases that will pass (with a proxy of "jdbcqa") are the following.1. Setting use-database-credentials to true and doing getConnection(jdbcqa3,…) or getConnection().2. Setting use-database-credentials to false and doing getConnection(wluser, …) or getConnection(). Summary There are many options to choose from for data source security.  Considerations include the number and volatility of WLS and Database users, the granularity of data access, the depth of the security identity (property on the connection or a real user), performance, coordination of various components in the software stack, and driver capabilities.  Now that you have the big picture (remember that table in part 1), you can make a more informed choice.

  Read the article

• OS8- AK8- The bad news...

  - by Steve Tunstall

  Ok I told you I would give you the bad news of AK8 to go along with all the cool new stuff, so here it is. It's not that bad, really, just things you need to be aware of. First, the 2013.1 code is being called OS8, AK8 and 2013.1 by different people. I mean different people INSIDE Oracle!! It was supposed to be easy, but it never is. So for the rest of this blog entry, I'm calling it AK8. AK8 is not compatible with the 7x10 series. Ever. The 7x10 series is not supported with AK8, and if you try to upgrade one, it will fail at the healthcheck. All 7x20 series, all of them regardless of age, are supported with AK8. Drive trays. Let's talk about drive trays and SAS cards. The older drive trays for the 7x20 series were called the "Riverwalk 2" or "DS2" trays. They were technically the "J4410" series JBODs that Sun used to sell a la carte before we stopped selling JBODs. Don't get me started on that, it still makes me mad. We used these for many years, and you can still buy them right now until December 15th, 2013, when they will no longer be sold. The DS2 tray only came as a 4u, 24 drive shelf. It held 3.5" drives, and you had a choice of 2TB, 3TB, 300GB or 600GB drives. The SAS HBA in the 7x20 series was called a "Thebe" card, with a part # of 7105394. The 7420, for example, came standard with two of these "Thebe" cards for connecting to the disk trays. Two Thebe cards could handle up to 12 trays, so one would add two more cards to go to 24 trays, or have up to six Thebe cards to handle 36 trays. This card was for external SAS only. It did not connect to the internal OS drives or the Readzillas, both of which used the internal SCSI controller of the server. These Riverwalk 2 trays ARE supported with AK8. You can upgrade your older 7420 or 7320, no problem, as-is. The much older Riverwalk 1 trays or J4400 trays are NOT supported by AK8. However, they were only used by the 7x10 series, and we already said that the 7x10 series was not supported. Here's where it gets tricky. Since last January, we have been selling the new style disk trays. We call them the "DE2-24P" and the "DE2-24C" trays. The "C" tray is for capacity drives, which are 3.5" 3TB or 4TB drives. The "P" trays are for performance drives, which are 2.5" 300GB and 900GB drives. These trays are NOT Riverwalk 2 trays, even though the "C" series may kind of look like it. Different manufacturer and different firmware. They are not new. Like I said, we've been selling them with the 7x20 series since last January. They are the only disk trays we will be selling going forward. Of course, AK8 supports them. So what's the problem? The problem is going to be for people who have to mix drive trays. Remember, your older 7x20 series has Thebe SAS2 HBAs. These have 2 SAS ports per card.  The new ZS3-2 and ZS3-4 systems, however, have the new "Thebe2" SAS2 HBAs. These Thebe2 cards have 4 ports per card. This is very cool, as we can now do more SAS channels with less cards. Instead of needing 4 SAS cards to grow to 24 trays like we did with the old Thebe cards, I can now do 24 trays with only 2 Thebe2 cards. This means more IO slots for fun things like Infiniband and 10G. So far, so good, right? These Thebe2 cards work with any disk tray. You can even mix older DS2 trays with the newer DE2 trays in the same system, as long as you have Thebe2 cards. Ah, there's your problem. You don't have Thebe2 cards in your old 7420, do you? Well, I told you the bad news wasn't that bad, right? We can take out your Thebe cards and replace them with Thebe2. You can then plug your older DS2 trays right back in, and also now get newer DE2 trays going forward. However, it's important that the trays are on different SAS channels. You can mix them in the same system, but not on the same channel. Ask your local SC if you need help with the new cable layout. By the way, the new ZS3-2 and ZS3-4 systems also include a new IO card called "Erie" cards. These are for INTERNAL SAS to the OS drives and the Readzillas. So those are now SAS2 instead of SATA like the older models. Yes, the Erie card uses an IO slot, but that's OK, because the Thebe2 cards allow us to use less SAS HBAs to grow the system, right? That's it. Not too much bad news and really not that bad. AK8 does not support the 7x10 series, and you may need new Thebe2 cards in your older systems if you want to add on newer DE2 trays. I think we can all agree that there are worse things out there. Like our Congress.   Next up.... More good news and cool AK8 tricks. Such as virtual NICS. 

  Read the article

• How to keep a generic process unique?

  - by Steve Van Opstal

  I'm currently working on a project that makes connection between different banks which send us information on which that project replies. A part of that project configures the different protocols that are used (not every bank uses the same protocol), this runs on a separate server. These processes all have unique id's which are stored in a database. But to save time and money on configurations and new processes, we want to make a generic protocol that banks can use. Because of PCI requirements we have to make a separate process for every bank we connect to. But the generic process has only 1 unique identifier and therefor we cannot keep them apart. Giving every copy of that process a different identifier is as I see it impossible because they run entirely separate. So how do I keep my generic process unique?

  Read the article

• July/August 2010 Frameworks Column Now Available

  - by steve.muench

  The July/August 2010 issue of Oracle Magazine is now live, and along with it the latest installment of the Developer Frameworks series:Compelling DialogCalling bounded task flows as inline popuipsEnjoy.

  Read the article

• Are you ready to take a walk in the clouds?

  - by Steve Loethen

  Cloud computing is here, whether we want it or not.  When I say "a walk in the clouds” I am not talking about a pleasant romantic comedy, but a real alternative to hosting applications on-premise.  For years we have had the power to host our web sites on remote systems.  Sure, challenges existed.  Mostly web sites.  I could, with a few clicks, create a account at a myriad of web host sites, put my site in the hands of a remote hosting company, and boom, I was a site on the internet.  But choices, power, and management was limited. Now, we have a set of services to let us approach and power and control we love, but with scalability of the data center.  My personal web site is hosted on a laptop running hyperV in my basement.  I have to manage the machine, patch it, make sure it is powered up.  This is fine for the “hello, this is my dog skippy site” that I maintain. If the football pool I run has an issue, one of the 10 users I have calls or emails me and I go check it out.  All is well. But this falls well below the needs of even the simplest of enterprises.  A business needs a stronger datacenter, a better pipe to the world.  Do I really want to base my business on a dynamic dns and a dsl line from the local phone company? Cloud computing gives us most of what I value (control, a db of my own, updating my site from Visual Studio). Come learn how this technology can transform your business.  If you are a Microsoft shop, or are interested in Microsoft in the cloud, on April 8 and 9, a 2 day free Azure training class is being conducted in Kansas City.  http://www.azurebootcamp.com/city/kansascity Hope to see you there.  If you come, make sure you look me up.

  Read the article

• Using Telerik MVC with your own custom jQuery and or other plug-ins

  - by Steve Clements

  If you are using MVC it might be worth checking out the telerik controls (http://demos.telerik.com/aspnet-mvc), they are free if you are doing an internal or “not for profit” application. If however you do choose to use them, you could come up against a little problem I had.  Using the telerik controls with your own custom jQuery.  In my case I was using the jQuery UI dialog. It kept throwing an error where I was setting my div to a dialog. Code Snippet $("#textdialog").dialog({ The problem is when you use the telerik mvc stuff you need to call ScriptRegistrar Code Snippet @Html.Telerik().ScriptRegistrar() in order to setup the javascript for the controls. By default this adds a reference to jQuery and if you have already added a reference to jQuery because you are using it elsewhere, this causes a problem. I found the solution here And it was to change the above ScriptRegistrar call to this… Code Snippet @Html.Telerik().ScriptRegistrar().jQuery(false).DefaultGroup(g => g.Combined(true).Compress(true));   If you come across this one on stackoverflow it wont work – in my case the HtmlEditor would render no problem, but was unusable.  Which is the same as someone else found when using the tab control – they went to the bother of re-writing the ScriptRegistrar.  Not for me that one!!

  Read the article

• Keep getting smbd errors, but apport asks questions I can't answer

  - by Steve Kroon

  What I want to know below is where to bug report the poor series of questions I'm being asked... Every time I reboot (at least), I get a crash dialog ("Sorry, Ubuntu 12.04 has experienced an internal error"). Clicking on show details shows the problem is with smbd, but the rest of the trace does not appear. When I wish to continue to send a bug report, I am told I will be asked a series of questions in a window titled "Apport". The first question asks: How would you best describe your setup? -I am running a Windows File Server -I am connecting to a Windows File Server. Since I am doing both, I have no idea which to choose. In any case, selecting one leads to the next question: Did this used to work properly with a previous release? -No -Yes But I never tried to use Samba in a previous release, so I can't seriously answer this. After picking an option here, I get more questions in a similar vein. Surely there should be "I don't know/I haven't tried" options, even if they simply mean you can't submit a useful bug report.

  Read the article

• How do I improve my ability to manipulate code quickly, not wpm?

  - by Steve Moser

  I have seen several questions on here about touch typing and words per minute but not about improving ones ability to manipulate text using keyboard shortcuts, bindings etc. I have tried putting a cheat sheet of keyboard shortcuts next to my monitor but I can never incorporate them in my 'flow'. I have also tried the 'just use vi and don't touch the mouse' method but that only helps me with navigating code and not editing. I would prefer to use some application (or game) to learn text manipulation. But it looks like nothing like that exists (app idea?). I'm open to other suggestions too.

  Read the article

• Fix a jQuery/HTML5 dynamic content issue by upgrading jQuery

  - by Steve Albers

  The default NuGet template for MVC3 pushes down jQuery 1.5.1.  You can upgrade to a new version (1.7.1 is current when this is written) to avoid a problem with the creation of “unknown” HTML5 tags in IE6-8: Take this sample HTML page using HTML5Shiv to provide support for new HTML5 tags in IE6 – IE8.  The page has a number of <article> tags that are backwards compatible in Internet Explorer 6-8 thanks to the HTML5Shiv. After the article elements there is a jQuery 1.5.1 script tag, and a ready() event handler that appends a footer element with a copyright to each of the article tags.  This appears correctly in IE9, but in older IE browsers the unknown tag problem reappears for the dynamic <footer> elements, even though we have the HTML5Shiv at the top of the page.  The copyright text sits outside of the two separate footer tags. To solve the issue upgrade your jQuery files to an up-to-date version.  For instance in Visual Studio 2010: In the Solution Explorer right click on References and choose Manage NuGet Packages. In the Manage NuGet Packages window select the jQuery item on the middle of the page and click the “Upgrade” button. You may need to upgrade your script src references to point at the new version. Using the updated jQuery library the incorrect tags should disappear and styles should work properly:   You can find more information about the issue on the jQuery Bug Tracker site.

  Read the article

• How do I find which isometric tiles are inside the cameras current view?

  - by Steve

  I'm putting together an isometric engine and need to cull the tiles that aren't in the camera's current view. My tile coordinates go from left to right on the X and top to bottom on the Y with (0,0) being the top left corner. If I have access to say the top left, top right, bottom left and bottom right corner coordinates, is there a formula or something I could use to determine which tiles fall in range? This is a screenshot of the layout of the tiles for reference. If there isn't one, or there's a better way to determine which tiles are on screen and which to cull, I'm all ears and am grateful for any ideas. I've got a few other methods I may be able to try such as checking the position of the tile against a rectangle. I pretty much just need something quick. Thanks for giving this a read =)

  Read the article

• Wordpress plugin installation error.

  - by Steve

  I'm trying to upload secure-wordpress.1.0.6, and I receive the following error: Warning: touch() [function.touch]: open_basedir restriction in effect. File(/abs_path/wordpress/tmp/secure-wordpress.tmp) is not within the allowed path(s): (/abs_path/:/abs_path/:/usr/local/lib/php:/tmp/php_upload) in /abs_path/public/www/wordpress/wp-admin/includes/file.php on line 199 Download failed. Could not create Temporary file. The /wp-content folder and all it's subfolders have 777 permission. I've added the following two lines to wp-config.php: putenv('TMPDIR='.ini_get('upload_tmp_dir') ); define('WP_TEMP_DIR', ABSPATH .'wp-content/uploads/'); What else should I try? I am using Wordpress 3.04 in a PHP 4.49 environment.

  Read the article

• Algorithmic problem - quickly finding all #'s where value %x is some given value

  - by Steve B.

  Problem I'm trying to solve, apologies in advance for the length: Given a large number of stored records, each with a unique (String) field S. I'd like to be able to find through an indexed query all records where Hash(S) % N == K for any arbitrary N, K (e.g. given a million strings, find all strings where HashCode(s) % 17 = 5. Is there some way of memoizing this so that we can quickly answer any question of this form without doing the % on every value? The motivation for this is a system of N distributed nodes, where each record has to be assigned to at least one node. The nodes are numbered 0 - (K-1) , and each node has to load up all of the records that match it's number: If we have 3 nodes Node 0 loads all records where Hash % 3 ==0 Node 1 loads all records where Hash % 3 ==1 Node 2 loads all records where Hash % 3 ==2 adding a 4th node, obviously all the assignments have to be recomputed - Node 0 loads all records where Hash % 4 ==0 ... etc I'd like to easily find these records through an indexed query without having to compute the mod individually. The best I've been able to come up with so far: If we take the prime factors of N (p1 * p2 * ... ) if N % M == I then p % M == I % p for all of N's prime factors e.g. 10 nodes : N % 10 == 6 then N % 2 = 0 == 6 %2 N % 5 = 1 == 6 %5 so storing an array of the "%" of N for the first "reasonable" number of primes for my data set should be helpful. For example in the above example we store the hash and the primes HASH PRIMES (array of %2, %3, %5, %7, ... ]) 16 [0 1 1 2 .. ] so looking for N%10 == 6 is equivalent to looking for all values where array[1]==1 and array[2] == 1. However, this breaks at the first prime larger than the highest number I'm storing in the factor table. Is there a better way?

  Read the article

• Affiliate software to attract incoming customers

  - by Steve

  I am close to starting a new website for a small business which imports products from USA to Australia. The wholesaler says he will allow my client to be the sole distributor for Australia & New Zealand. I'm not sure what CMS or shopping cart software to use yet, but it will need to include an affiliate system to allow advertisers to push customers our way. Do you have any suggestions for robust, flexible affiliate software?

  Read the article

• MVC 2 in 2 Minutes!

  - by Steve Michelotti

  In a couple of recent Code Camps, I’ve given my presentation: Top 10 Ways MVC 2 Will Boost Your Productivity. In the presentation, I cover all major new features introduced in MVC 2 with a focus on productivity enhancements. To drive the point home, I conclude with a final demo where I build a couple of screens from scratch highlighting many (but not all) of the features previously covered in the talk. A couple of weeks ago, I was asked to make it available online so here it is. In 2 minutes the demo builds a couple screens from scratch that provide a goal setting tracker for a user. MVC 2 features included in the video are: Template Helpers / Editor Templates Server-side/Client-side Validation Model Metadata for View Model HTML Encoding Syntax Dependency Injection Abstract Controllers Custom T4 Templates Custom MVC Visual Studio 2010 Code Snippets The complete code samples and slide deck can be downloaded here: Top 10 Ways MVC 2 Will Boost Your Productivity. Enjoy! (Right-click and Zoom to view in full screen)   Click here for Direct link to video

  Read the article

• URL hex characters in .htaccess

  - by Steve

  There is an old page with a space in the filename, and this is no longer found on the website. So I need to redirect this page to another page using a 301 redirect in .htaccess. If I place the filename directly into .htaccess (Bouquets%20%26%20Loose.html), the redirect does not work. If I escape the % sign like this (Bouquets\%20\%26\%20Loose.html), the redirect still does not work. How do I get this redirect to work in .htaccess? Thanks.

  Read the article

• Where is Nautilus icon file located and how is it chosen?

  - by Steve

  When I plug my Garmin Nuvi 265 GPS device into my computer via a USB cable, it mounts as a drive with a blue triangle icon instead of the default gray hard drive icon. HOW does Nautilus know how to do this? After much laborious searching, I found that the icon info is stored in ~/.gconf/apps/nautilus/desktop-metadata/GARMIN@46@volume/gconf.xml -- but only when a custom icon is selected. So Where is this blue icon file? Why does Nautilus use it instead of the plain drive icon? Is there a way to have give each of my drives a custom icon -- so that when I stick in my various flash drives, they have a distinctive icon (i.e. a 'favicon.ico' file on root or such?) Using Gnome 2.30.2 on Ubuntu 10.04.

  Read the article

• VNIC - New feature of AK8 - Working with VNICs

  - by Steve Tunstall

  One of the important new features of the AK8 code is the ability to use multiple IP addresses on the same physical network port. This feature is called VNICs, or Virtual NICs. This allows us to no longer "burn" a whole port in a cluster when one cluster peer owns a network port. Traditionally, we have had to leave Net0 empty on controller 2, because it was used for managing controller 1. Vise-versa for Net1 on Controller 1. Then, if you have data going over 10GigE ports, you probably only had half of your ports running at any given time, and the partner 10GigE port on the other controller just sat there, doing nothing, unless the first controller went down. What a waste. Those days are over.  I want to thank and give a big shout-out to our good partner, OnX Enterprise Solutions, for allowing me to come into their lab and play around with their 7320 to do this demo. They let me make a big mess of their lab for the day as I played around with VNICs. If you're looking for a partner who knows Oracle well and can also piece together a solution from multiple vendors to get you what you need, OnX is a good choice. If you would like to talk to your local OnX rep, you can contact Scott Gill at [email protected] and he can point you in the right direction for your area.  Here we go: Here is what your Datalinks window looks like BEFORE you upgrade to AK8. Here's what the same screen looks like after you upgrade. See the new box? So here is my current network setup. I have my 4 physical interfaces setup each with an IP address. If I ping them, no problems.  So I can ping 180, 181, 251, and 252. However, if I try to ping 240, it does not work, as the 240 address is not being used by any of these interfaces, right?Let's change that. Here, I'm going to make a new Datalink by clicking the Datalink "Plus sign" button. I will check the VNIC box and tell it to use igb2, even though another interface is already using it. Now, I will create a new Interface, and choose "v_dl2" for it's datalink. My new network screen looks like this. A few things to take note of here. First, when I click the "igb2" device, it only highlights dl2 and int2. It does not highlight v_dl2 or v_int2.I think it should, but OK, it looks like VNICs don't highlight when you click the device. Second, note how the underscore character in v_dl2 and v_int2 do not seem to show on this screen. You can see it plainly if you go in and edit them, but from here it looks like a space instead of an underscore. Just a cosmetic bug, but something to be aware of. Now, if I click the VNIC datalink "v_dl2", on the other hand, it DOES highlight the device it belongs to, as it should. Seen here: Note that it did not, however, highlight int2 with it, even though int2 is connected to igb2. That's because we clicked v_dl2, which int2 has nothing to do with. So I'm OK with that. So let's try pinging 240 now. Of course, it works great.  So I now make another VNIC, and call it v_dl3 using igb3, and v_int3 with an address of 241. I then setup three shares, using ports 251, 240, and 241.Remember that IP 251 and 240 both are using the same physical port of igb2, and IP 241 is using port igb3. Next, I copy a folder full of stuff over to all three shares at the same time. I have analytics going so I can see the traffic. My top chart is showing the logical interfaces, and the bottom chart is showing the physical ports.Sure enough, look at the igb2 and vnic1 interfaces. They equal the traffic going over the igb2 physical port on the second chart. VNIC2, on the other hand, gets igb3 all to itself. This would work the same way with 10Gig or Infiniband ports. You can now have multiple IP addresses and even completely different subnets sharing the same physical ports. You may need to make route table entries for that. This allows us to use all of the ports you paid for with no more waste.  Very, very cool.  One small "bug" I found when doing this. It's really not a bug, it was designed to do this when VNICs were not around. But now that we have NVIC capability, they should probably change this. I've alerted the engineering team about this and they're looking into it, so perhaps it will be fixed in a later code. Here it is. Remember when we made the new VNIC datalink, I specifically said to click on the "Plus Sign" button to create it? I don't always do that. I really like to use the drag-and-drop method to create my datalinks in the network screen.HOWEVER, if you were to do that for building a VNIC, it will mess you up a little. Watch this. Here, I'm dragging igb3 over to make a new datalink. igb3 is already being used by dl3, but I'm going to make this a VNIC, so who cares, right? Well, the ZFSSA does not KNOW you are going to make it a VNIC, now does it? So... it works as designed and REMOVES the igb3 device from the current dl3 datalink in the background. See how it's now missing? At the same time, the dl3 datalink choice is missing from my list of possible VNICs for me to choose from!!!! Hey!!! I wanted to pick dl3. Why isn't it on the list??? Well, it can't be on this list because dl3 no longer has a device associated with it. Bummer for you. When you click cancel, the device is still missing from dl3. The fix is easy. Just edit dl3 by clicking the pencil button, do absolutely nothing, and click "Apply". The device will magically come back. Now, make the VNIC datalink by clicking the "Plus Sign" button. Sure enough, once you check the VNIC box, dl3 is a valid choice. No problem.  That's it for now. Have fun with VNICs.

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >