Search Results

Search found 6172 results on 247 pages for 'usb headset'.

Page 13/247 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • USB ports causing Wireless and Mobile Phone tethering drop out

    - by chrolli
    I have a problem with my USB ports and I can't seem to pinpoint the problem. I'm hoping that I can get some idea as to how to troubleshoot my problem. Problem description: I recently bought a USB Wireless Adapter in order to connect my Desktop PC to the WLAN. The dongle keeps dropping off connection regularly on average once a minute. And the connection is slow. What I've tried: I installed a network scanner to determine signal strength. The PC/adapter combo is getting about 70% signal strength. I have a laptop that has an internal Wireless adapter. I moved the laptop near the location of the PC. The signal strength was above 90%. I installed the USB adapter on the laptop. I placed the laptop near the location of the PC. The signal strength was above 80%. And there is no drop out issue. I've isolated the problem to be on the PC. I used internet tethering on my mobile phone in order to test the USB ports. I get the same problem, themobile phone keeps dropping in and out. I plugged the adapter and phone on all USB ports, and it is still dropping out on all ports. I've isolated the problem to be the Motherboard, USB hub. I updated the BIOS, and USB driver. Still dropping out. I noticed that when I used the mobile phone tethering method, the phone (iphone 5) is guarenteed to drop out and does not appear to charge if I jiggle the the 8-pin connector on the base of the phone. If I push the pin tightly on the phone, the phone starts charging, as soon as I let go, it stops and drops out from the PC. This is strange because this doesn't happen when it is plugged to the powerboard. Which means that the 8 pin connector is fine. I'm not sure what the problem is. I assume that it is to do with the USB ports not supplying enough power which in turn causes the devices to intermittently drop out. The reason I say this is because the USB cable works fine when plugged into a powerboard with enough power supplied to the phone. Only when it is plugged into the USB port on the PC, does it drop out. My motherboard is Asus P8z68-v le. My Wireless adapter is the D-link DWA131. I can't seem to find any settings in the BIOS to increase the south bridge voltage so as to supply more power to the USB ports. Although this problem only occurs when I'm trying to hook up to a device supplying internet connection. My USB HDD, Flash drives, and Mouse and Key are working fine! Any suggestions please?

    Read the article

  • Good OS (gOS) instalation from USB key

    - by Peter Stegnar
    I would like to install Good OS from USB key. I have found a nice instructions http://www.pendrivelinux.com/usb-gos-install-from-windows/. Everything is OK while USB key is being prepared. But when I am trying to boot from that USB key I get the following error: "no bootable partition in table" It seems like USB key is not prepared properly ... How can I install gOS from USB key?

    Read the article

  • Split internal USB pinouts - is it possible?

    - by TM
    I've currently got a situation in my PC where I have 3 devices that connect to the motherboard via the onboard USB pinouts. The problem is, I only have two sets of USB pinouts on my motherboard. Is there any way of connecting two devices to one set of pinouts? Essentially, I'm looking for the functionality of a USB hub, but I'd like it to be inside the case, and provide pinouts rather than regular USB ports. Update: I don't need any more USB ports, I have devices that use the USB pinouts. I already have extra USB ports that aren't used, so adding an PCI USB card doesn't really help anything.

    Read the article

  • GA-P31-S3G motherboard usb flash drive boot

    - by user1048125
    I currently trying to understand if my motherboard supports booting from USB flash drive or not... In motherboard manual it written: "First/Second/Third Boot DeviceSpecifies the boot order from the available devices. Use the up or down arrow key to select adevice and press to accept. Options are: Floppy, LS120, Hard Disk, CDROM, ZIP,USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN, Disabled" Is there way to boot from 8GB USB flash drive?

    Read the article

  • USB Device Not Recognized (Mac)

    - by Nargis
    Fortunately, my Mac-pro also made one of my USB storage devices inoperable. My data loss in that USB device but such as another USB device and USB keyboard are unaffected. I have heard that my friend usually trigger this problem by having at least two devices plugged in - typically thumb drives/USB flash drives, and then once a second flash drive is plugged in that become unrecognized. I have only two USB ports and first I think port loose when I connect two USB devices. But later I found these hidden files (“.Spotlight-V100”, “.TemporaryItems”, “.Trashes”, and “._.Trashes”) are created by Mac OS. And before unrecognized that USB device I have deleted these files and my friend had also done the same action. Now I don’t want to test for next USB device to become unrecognized and I won’t deleted any hidden system file inside the flash drives. But I really want to know why these problems happened. Can I delete these hidden files when I only connect to virtual machine (Vista), because I used to delete all useless hidden files from USB flash drives? Any suggestions or thoughts to prevent this or alternative suggestions to fix the problem that take lossless would be much appreciated.

    Read the article

  • power management of USB-enclosed hard drives

    - by intuited
    With a typical USB hard drive enclosure, is the full range of drive power management functionality available? In what may be an unrelated matter: is it possible to suspend a PC without unmounting an attached USB-powered drive, and then remounting it on resume? This is the behaviour I'm currently seeing (running Ubuntu linux 10.10). Are there certain models or brands that provide more complete control over this aspect of drive operation? My Friendly Neighbourhood Computer Store carries (part of) the Vantec Nexstar product line.

    Read the article

  • Mounting a usb floppy disk drive in Ubuntu 11.04

    - by Jocky B
    I have tried to mount my usb floppy disk drive in 11.04 Natty. So far I have managed to use the udisks --mount/dev/sdf command in terminal, but get a message that I have not stated a filetype "john@john-desktop:~$ udisks --mount /dev/sdf Mount failed: Error mounting: mount: you must specify the filesystem type" This is the result I get when trying to mount the usb floppy disk drive. Anyone know how to proceed Cheers

    Read the article

  • Booting From USB Problem

    - by Rob Barker
    I'm trying to boot Ubuntu 10.12 from a usb memory stick in a first time installation, but i keep getting a message preventing me from progressing any further. It says this. SYSLINUX 4.06 EDD 4.06-pre1 Copyright (c) 1994-2012 H.Peter I've reordered my bios boot priorities correctly so the usb loads before the hard drive. My hard drive is faulty, but i am getting a new one tomorrow. Any ideas? Help would be much appreciated.

    Read the article

  • USB Wifi that works with 12.04

    - by Colin Matheson
    I have done several hours of searching and I am still looking for a few USB wifi adaptors that run in 12.04 with no additional driver installations or other fiddling. I am looking to plug in the adaptor and have the laptop recognize and start connecting. We have 30 older laptops with flaky internal wifi cards so I thought that if I could find a $10-$20 USB adaptor that work reliably in 12.04 I could plug it in and solve all my connectivity problems for a few hundred dollars.

    Read the article

  • Should Exterrnal USB hard drive auto mount Ubuntu 12.04.01 LTS

    - by Chris Good
    I want to have external USB hard drives automatically mounted when plugged in. I have 2 drives exactly the same except for volume label. They both have the same UUID. I want to be easily able to swap them as I'm using them for backups and want to keep 1 at home for off site backup. I've set up the /etc/fstab so they should mount at different places based on their volume label: /etc/fstab : LABEL=Passport1 /media/Passport1 ntfs defaults,windows_names,locale=en_US.utf8 0 0 LABEL=Passport2 /media/Passport2 ntfs defaults,windows_names,locale=en_US.utf8 0 0 blkid shows : ... /dev/sdc1: LABEL="Passport2" UUID="4E1AEA7B1AEA6007" TYPE="ntfs" /dev/sdd1: LABEL="Passport1" UUID="4E1AEA7B1AEA6007" TYPE="ntfs" They both mount automatically during reboot but do not mount when just plugged in to a running system. I've read lots of stuff about this, much of it is old so I'm not sure if it applies. I've read some stuff that says the mounts should happen automatically when plugged in, and lots of other stuff that says you have to install other software to make this happen, although much of it just seems to set up the fstab. What's the real story? Here is /var/log/syslog when drive is plugged in: Dec 14 11:22:58 ausyvutims1 kernel: [66221.300196] usb 1-1: new high-speed USB device number 6 using ehci_hcd Dec 14 11:22:58 ausyvutims1 mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1" Dec 14 11:22:58 ausyvutims1 mtp-probe: bus: 1, device: 6 was not an MTP device Dec 14 11:22:58 ausyvutims1 kernel: [66221.656020] scsi7 : usb-storage 1-1:1.0 Dec 14 11:22:59 ausyvutims1 kernel: [66222.661534] scsi 7:0:0:0: Direct-Access WD My Passport 0748 1016 PQ: 0 ANSI: 6 Dec 14 11:22:59 ausyvutims1 kernel: [66222.666466] scsi 7:0:0:1: Enclosure WD SES Device 1016 PQ: 0 ANSI: 6 Dec 14 11:22:59 ausyvutims1 kernel: [66222.667739] sd 7:0:0:0: Attached scsi generic sg3 type 0 Dec 14 11:22:59 ausyvutims1 kernel: [66222.667913] ses 7:0:0:1: Attached Enclosure device Dec 14 11:22:59 ausyvutims1 kernel: [66222.668047] ses 7:0:0:1: Attached scsi generic sg4 type 13 Dec 14 11:22:59 ausyvutims1 kernel: [66222.678473] sd 7:0:0:0: [sdc] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB) Dec 14 11:22:59 ausyvutims1 kernel: [66222.687700] sd 7:0:0:0: [sdc] Write Protect is off Dec 14 11:22:59 ausyvutims1 kernel: [66222.687705] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08 Dec 14 11:22:59 ausyvutims1 kernel: [66222.701076] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.701081] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.738062] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.738068] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.754558] sdc: sdc1 Dec 14 11:22:59 ausyvutims1 kernel: [66222.792006] sd 7:0:0:0: [sdc] No Caching mode page present Dec 14 11:22:59 ausyvutims1 kernel: [66222.792012] sd 7:0:0:0: [sdc] Assuming drive cache: write through Dec 14 11:22:59 ausyvutims1 kernel: [66222.792016] sd 7:0:0:0: [sdc] Attached SCSI disk Dec 14 11:22:59 ausyvutims1 ata_id[16971]: HDIO_GET_IDENTITY failed for '/dev/sdc': Invalid argument Thanks for any help offered

    Read the article

  • After upgrading to 12.10 usb drives fail to mount

    - by John Shore
    Following upgrade to 12.10, my usb drives - both pen drives and a usb hard drive - fail to mount with the error message: Unable to mount *name of drive* volume Adding read ACL for uid 1000 to '/media/*my home file name*' failed: Operation not supported This is on a desktop Dell Inspiron 530. I also have a Dell Inspiron Mini 10 netbook which I also upgraded to 12.10 (slightly smaller installation on a flash hard drive). all devices mount automatically without problems on this computer.

    Read the article

  • Mouse / Usb don't work

    - by Enrico
    I just start now with Xubuntu (11.10) and don't know why but my mouse work strage, so if i move my mouse it move like jump not fluid (but if i use my pad there aren't any problem). another really strange thing is if I take off the mouse (usb) and put back doesn't work anymore.also if i put pen drive nothing uppen, maybe it's some usb problem or something i don't know. PC: Fujitsu Siemens Amilo. thank for your help Enrico

    Read the article

  • USB mouse / keyboard not working after suspend

    - by Frode
    After upgrade from 12.04 to 12.10, the USB mouse/keyboard is not working when the laptop wake up from suspend. I need to remove and insert the USB dongle to get keyboard/mouse working again. This was not a problem before the upgrade. 6 months ago I had the same problem when upgrading from 11.10 to 12.04. At that time I solved it by doing a clean install of 12.04. Updated: Issue resolved after installing ppa:xubuntu-dev/xfce-4.12

    Read the article

  • Create windows XP's live USB using ubuntu

    - by Avnish
    My hard disk crashed.. I can run Ubuntu using a pendrive by making a live USB of Ubuntu, which I made using Windows 7. In the similar way, I want to run Windows XP too using another pen drive (without hard disk) and I want to make it from Ubuntu (12.04). The resources I have are Ubuntu's live USB, Windows XP and Windows 7 installation disk, some blank DVDs but no hard drive. I have very basic knowledge of Linux. Thanks

    Read the article

  • creating a bootable USB stick on OS X

    - by Rob
    I'm trying to create a bootable USB stick on OS X using http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx When this finishes, I get a message in terminal saying "695+1 records in 695+1 records out 729067520 bytes transferred in 264.563662 secs (2755736 bytes/sec)" But a message pops up saying "The disk you inserted was not readable by this computer" Options are Initialize, Ignore or Eject. What am I doing wrong or omitting. (oh - complete novice)

    Read the article

  • Ubuntu 12.10 Live USB BootError

    - by Sivan
    I am a Linux Newbee, running ubuntu 12.04 i386 on a 64-bit machine. Now I just downloaded Ubuntu 12.10 AMD64 iso and made a bootable USB using Startup Disk Creator. I was directed to install available updated packages, which I did install. The Startup Disk was succesfully created. But when I tried to boot from the USB I am getting a BootError message and nothing else. What could have gone wrong?

    Read the article

  • cannot boot ubuntu 10.04 from usb

    - by Pragya Karki
    i tried to install ubuntu 10.04 from my silicon power 4gb pendrive. i have installed ubuntu 11.10. i downloaded "ubuntu-10.04.4-desktop-i386" from ubuntu from it's site and created a usb bootable drive using the instructions from the site. when i insert my usb to boot it gives following error: unknown keyword in configuration file: gfxboot vesamenu.c32: not a COM32R image boot: plz can u give me any solution..

    Read the article

  • USB Wireless keyboard and wired mouse do not power on at system boot

    - by Victor S
    This did not use to be an issue but, I am not sure why, my USB keyboard and mouse are not powering on after system boot. I can fix the keyboard by taking out and then plugging back in the USB antennae, which makes it work right away, but the mouse, even if I un-plug it and plug it back in, it takes about two-three minutes until it receives any juice and starts working. Any ways I can debug this, or fix it? Thanks!

    Read the article

  • Set up USB for Virtualbox

    - by kst
    I'm using Ubuntu Maverick and Virtual Box 3+ and I installed Window 7 Ultimate Editon. The problem is that it doesn't detect USB drives on Window 7 but USB peripherals (mouse + keybord) are working. I followed this instruction, but I can't find the user group vboxusers. How can I continue? I would also like to upgrade to the latest version without any risk (without losing my virtual hard disk drive).

    Read the article

  • Can't boot from usb after a few successful boots

    - by janzeze
    I have ubuntu 11.10 on my usb flash maxell (4 gb) i installed it with universal usb installer and in the beginning everything worked just fine. I installed a few apps (skype, audations, vlc, codecs and a web camera app) it continued to works. but since yesterday it doesn't boot it shows me the operating system loading screen (ubuntu with the dots turning orange and white) and nothing more... please if anyone can help?

    Read the article

  • No USB 04b4:0307 mike input after 10.04

    - by Papou
    I am using an USB phone that is in fact a so-called "sound card" based on the 04b4:0307 chip. In fact, I have two different phones using 04b4:0307 and in fact I have a sound USB key too. This, I believe, is the start of why they call 04b4:0307 "ubiquitous" (instead of oh four bee...). But not "eternal". The mike worked in Ubuntu 9.10 and 10.04 but not later ([email protected]). "not working" means that 04b4:0307 shows in Sound Preference but that its vu-meter is mute. I have posted the full lsusb and the result of tests in various systems here: http://www.papou.byethost9.com/tmp/1043601.html Note: Tests done on VirtualBox (thankfully). But UbuntUnity no longer works on VB, so I used the LinuxMint equivalent. ?hat's fate. I could not find any problem report close enough. What should be my next step? I believe the problem occurs in module snd-usb-audio. One thing I might try if I knew how is hacking a DEB with its 10.04's source. I can hack DEBs. Any hint welcome on how to make a DEB overriding a kernel packed module. I mean that the newly installed module should have precedence, be loaded instead, the module installed with the kernel. TIA !

    Read the article

  • VirtualBox: Why are some USB devices disabled?

    - by torbengb
    Overview: My Host OS is Ubuntu 10.10 and guest OS is WinXP on the VirtualBox version downloaded from Oracle including "VirtualBox 4.0 Oracle VM VirtualBox Extension Pack" so that USB passthrough works. This works in general (I was able to back up my iPhone to iTunes in the guest OS), but some devices aren't available even though they're ptrovided in the VirtualBox settings. Specifics: In the VirtualBox settings for the guest OS, there's the part where you can select which of your USB devices should be visible to the guest OS. I've selected several devices including the iPhone. So far so good. Then an iOS upgrade came along; my iPhone is now in DFU mode (or recovery mode?) and represents itself not as "iPhone" but as "iPhone (DFU mode)". I have now also added this device to the list of USB devices that the guest OS should see -- but it doesn't see this device. Questions: Am I right in expecting that the guest OS ought to see the DFU device when I add it in the VirtualBox settings? What steps do I need to take so that the guest OS will really see the DFU device?

    Read the article

  • HTC Android device mounted as USB drive is read-only unless I'm root

    - by Ian Dickinson
    When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

    Read the article

  • Attempting to install netgear N300 Wireless USB Adapter on Ubuntu without a present internet connection

    - by Liz
    Hello Linux/Ubuntu world out there. I don't have internet presently on the desktop I am trying to install the USB wireless adapter on. This seems to be the problem, which if the hardware would work would theoretically fix the problem. I can NOT access the internet via anything but wireless. I am presently on my laptop searching for answers while trying to install this little device. So any advice will have to take that into account. Now I have tried so far, using WINE which does not want to work, I have tried Windows Wireless Drivers which doesn't want to work, I have tried Software Sources, Other Software and it will not acknowledge the cdrom as a repository stating errors like E:Unable to stat the mount point /cdrom/ -stat (2: No such file or directory) However I can open the CD icon on my computer and access and browse the files. The computer can read the CD. I can read the CD. I've tried just plugging it in and seeing if the computer will automatically recognize the hardware, and go from there. That does not work either. I have tested USB port to just verify that the USB port works. It does. My laptop recognizes the hardware, and would easily install the software if I prompted it to. The difference is that my laptop is Vista, and I HATE Vista. Any tips, tricks?

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >