Search Results

Search found 2448 results on 98 pages for 'vmware vcenter'.

Page 13/98 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• Do I need VMWare vSphere?

  - by Gk

  I'm planning use vmware to upgrade some of very aged server instead replace with all new bunch of server. VMWare vSphere sounds great but because of low budget I can't afford for both licenses and SANs. Without SAN, is vSphere worth the price? As I know without SAN, the VMWare HA, VMontion, FT is unavailable. So, do I need vSphere or only ESXi free version assume that I only need backup vm daily? Do you know any completed solution about backup on ESXi 4? TIA, -Gk

  Read the article

• Problem after resizing partition for Fedora under Vmware fusion

  - by user20196

  Hi, I am running FC9 under VMware Fusion 3.0 I wanted to resize my /dev/sda2 partition. In order to do that I did the following: 0. changed the size of the vmware file (under VMware settings). 1. rebooted the host to rescue mode without mounted disks 2. fdisk - removed & added /dev/sda2 - i had bigger /dev/sda2 3. lvm pvresize /dev/sda2 4. lvm pvdisplay - it showed me bigger size on /dev/VolGroup00 for /dev/sda2 5. lvm vgchange -a y - device-mapper: reload ioctl failed: Invalid argument - 2 logical volume(s) in volume group "VolGroup00" now active This is not true because there is no /dev/VolGroup00/LogVol00 My whole "/" disappeared. dmsetup table, shows: VolGroup00-LogVol01: 0 2097152 linear 8:2 38338944 VolGroup00-LogVol00: Can some one help me to solve this? Thank You.

  Read the article

• VMware vSwitches and Dell PowerConnect BPDU guard

  - by dunxd

  I am using two Dell PowerConnect 6248 switches to connect a VMware host vSwitch. A discussion of config of Cisco switches for use with VMware advises to set physical ports connected to vSwitch with bpduguard and portfast. However, Dell switches don't have the bpduguard setting for individual ports. I can switch it off globally for all portfast ports, but I don't think I want to do that. Should I: Disable STP on the vSwitch connected ports? Leave STP on and enable portfast on the ports, and forget about bpduguard? Disable bpduguard on all portfast ports via global config Do something else? See also: VMware vSwitches and spanning tree

  Read the article

• Internet connection sharing: Ubuntu 9.10 Server on Windows 7 and VMWare

  - by avesse

  I'm trying to get Internet Connection Sharing (ICS) working between my Windows 7 RTM host and a Ubuntu 9.10 Server running on VMWare Workstation 6.5, but I have not been able to get it right. Here's what I have done: Configured VMWare to use Host Only networking (I tried NAT as well). Enabled ICS on my host's network connection, allowing VMnet1. After enabling it, Windows informed me that its VMnet1 IP has changed to 192.168.137.1. So in VMWare's Virtual Network Editor I configured VMnet1: Subnet 192.168.137.0 Mask 255.255.255.0 I did the same for DHCP. For NAT i set 192.168.137.1 as Gateway. I cannot ping any sites or get access through apt-get/aptitude install/update, although domains do get resolved to IPs. I have also tried using a static IP in Ubuntu. I don't know if it makes a difference, but my external IP is locked to my host's MAC address.

  Read the article

• Windows 7 Activation with Bootcamp and VMWare

  - by Jason Hernandez

  I have windows 7(64) installation setup on a Boot Camp partition on my MacBook Pro 13". I also access this partition through VMware hosted by OS X (snow leopard). Every time I switch between VMware and Boot Camp windows says that it needs to be re-activated because of hardware or driver changes. I've tried wmware KB KB 1003426 to no avail. Edo Thanks, Jason Edit, I am using the most recent VMware and tools. I've tried "KB 1004917" as well. No Dice. I'm considering re-installing at this point.

  Read the article

• Back / Forward mouse buttons do not work in VMWare Workstation 6.5 Guest OS

  - by Tim Lara

  I am using a Logitech G9 mouse and running VMWare Workstation 6.5.3 on Vista x64. The guest OS is Win XP, and has the most current version of VMWare Tools installed. Left / right buttons and mouse wheel scrolling work fine in the guest OS, but the back / forward buttons are apparently not recognized. I have tried installing the Logitech software inside the guest OS as well, but it still did not recognize the back / forward buttons. (I didn't really expect this to work since the guest OS doesn't actually see the mouse hardware as a Logitech G9 directly anyway.) I vaguely remember seeing something a while back about editing the virtual machine config file to specify a 5-button mouse rather than the default 3-button setup, but I can't seem to find any specifics on how to do so in the VMWare documentation. Does anyone know if such a workaround exists, or is 5-button mouse functionality just not supported?

  Read the article

• VMWare Headphone Issue

  - by Ash_Geek_Pickney

  I am running VMWare Workstation Version 7 on a Windows 7 partition on a Macbook Pro. I have built a virtual XP machine within vmware to run some old music programs. The sound from my virtual machines comes out of my macbook speakers but the volume is not controllable using my macbook volume controls, only by using the volume control on the XP machine. My problem is that i need to use headphones, and when i plug a headphone jack into my macbook, the sound from my vmware virtual machines still comes out of the macbook speakers. I am baffled. Please help. Thanks in advance...

  Read the article

• Moving VMWare Fusion image to Boot Camp

  - by Kristopher Johnson

  I have Windows 7 64-bit running in VMWare Fusion on my MacBook, but am disappointed with the performance, and so I want to try Boot Camp. However, I'd like to avoid reinstalling Windows and all my applications; I just want to somehow copy my VMWare Fusion "disk image" to a Boot Camp partition. My initial thoughts are that I should be able to run a Windows backup program in VMWare Fusion to back up the entire virtual disk, then set up Boot Camp and restore from that backup. However, Googling finds a few posts by people who have tried that and have encountered problems. So, is there a "known good" procedure for doing this?

  Read the article

• VMWare Server 2 Install is Failing w/ Error 25032: "failed to customize windows logon process"

  - by Justin Searls

  VMWare Server 2 install question here.* Straightforward question that would probably require a VMWare expert to pull apart, given that Google has been totally worthless on this. On a patched Windows XP machine, any attempt to install VMWare Server 2.0.1 results in failure, just prior to completion (progress bar is full but I can tell network adapter stuff hasn't been fired yet and most of the services haven't been instaled). The error: Error 25032. Failed to customize Windows logon process (). Please contact your administrator. Upon dismissing the error, you're treated to: Warning 25033. Failed to remove Windows logon customization (VMGINA.DLL). Please contact your administrator. Clicking "OK" rolls back your installation. Killing the installer and hoping that it somehow leaves a working install behind was also unproductive. *I hope install troubleshooting isn't outside the purview of serverfault, I'm typically an SO user.

  Read the article

• VMware Workstation 9 Security Best Practice Guides

  - by slickboy

  Could someone please point me in the direction of where I could find some best practice securiy guides for VMware Workstation 9 please? I've searched the VMware site and to say it's badly organised is an understatement! I've been able to find general setup guides but nothing with a specific focus on security. I'm also wondering is there any best practice guides that I should follow when installing Windows 7 Professional and Windows Server 2008 R2 on VMware Workstation 9? I obviously will be implementing Microsofts recommended security best practices but I'd be very interested in any recommendations for virtualizing these operating systems. Any help is much appreciated.

  Read the article

• Preparing a new physical system with VMWare

  - by Max

  I need to create a new installation of Windows, but at the same time I need this computer. So I decided to create a new physical disk from within VMWare, install windows/drivers/software and then just replace the HDD in the computer. I've bought a new HDD, split it into two partions and installed Windows 7 using the VMWare's ability to use phusical disks. I can see the windows files and directories that have been created on this partition, but when I'm replacing the HDD in the host machine it cannot boot from it. Why is that? Is it at all possible to create a bootable physical disk with VMWare or I should create a virtual disk and then use some HDD imaging tool to copy the HDD image to a physical disk? Maybe there's a better way of installing a new system and working on the computer at the same time?

  Read the article

• Problems connecting Centos to the network when running in VMWare

  - by Sakin

  Hi, I installed CentOs on VMware running on windows XP. When trying to configure it to connect to the internet, I get an error message when trying to bring up the network interface: [root@VMLinux ~]# /et/init.d/network start Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0... failed [FAILED] VM is running on a machine that has access to the network, I tried it on two different networks that have DHCP enabled. I tried to configure VMWare to use a bridged connection as well as NAT connection. An image of Ubuntu runs fine on the same VMware. What am I missing here? Thanks.

  Read the article

• SAN alternative for VMWare

  - by CogitoErgoSum

  Has anyone utilized something aside from a SAN to run their VMWare images off? We are looking to drop in two HP Servers and VMWare on them and run them off a SAN. Due to the cost of SAN though our CFO and VP are wondering if there are any viable alternatives (I.e. NAS) that can effectively run a VMWare. I can't think of any off of the top of my head. IF anyone can provide one or a good article outlining why to stick to SAN that'd be great.

  Read the article

• [SOLVED] vmware problems - networking - no packet response

  - by jack

  XP is my host. Ubuntu is my Guest in VMware. When I do the following commands, I should get SMTP respones but now get no response. I use wireshark to analayze it. Also in wireshark shows nothing. root@vmware:~# netcat 192.168.1.2 25 220 762462a8c4d Microsoft ESMTP MAIL Service, Version: 6.0.2600.5949 ready at Fri, 12 May 2010 18:04:20 +0800 EHLO SAYHELLO VRFY TEST@LOCALHOST test \ sdfsafsd How can I fix it? UPDATE: I came to know that this is no VMWare problem. This is Netcat problem. For this, you might have to type Ctrl+M {ENTER} {ENTER}

  Read the article

• virtualbox 2 vmware disk

  - by anol

  I have a virtualbox disk I'd like to convert to a vmware disk. The disk is dynamic which makes it a lot more trickier. If I follow the instructions at http://xpapad.wordpress.com/2010/02/21/migrating-from-virtualbox-to-vmware-in-linux, the vdi-to-raw conversion will result in a 2 TB file. I don't even have that much disk space! The first step therefore seems to be a dynamic to static conversion of the virtualbox disk, right? How do I do that or is there perhaps a better way to convert to vmware? Help!

  Read the article

• Testing a Virtualisation of a Debian Server (vmWare vSphere probably)

  - by xyza

  I'm soon getting access to a powerful root-server (quad-core, 16gb ram, 1gbit connection) where gameservers (like minecraft,counterstrike etc.) for different customers should be setup. My plan is to use programs such as vmWare vSphere to create some virtual machines for each customer. Inside such a virtual machine I'll setup the gameserver and maybe some kind of ftp server when its needed. Now that I'm kinda new to virtualisation of servers I want to test this local on my Desktop Computer. Is it possible to create a virtual machine of debian using vmWare Player on my Windows desktop computer and then install vmware vSphere in this VM to create multiple VM's inside that VM ? Or do I really need to install Debian on my desktop computer. (I want to use the time during installations etc. to work a bit at my windows installation) Some tips on virtualising debian servers are also appreciated :)

  Read the article

• Reliability of VMware ESXi for backup

  - by Laurent

  Currently, I'm using a server as an online backup and to run some VMs with VMware Server. I'm interested in converting it to VMware ESXi but have some concerns about the possible corruption of my VMDKs if I choose to store my data on them. I was also thinking of storing the data directly on the datastore but can't find any way to mount a VMFS volume with a LiveCD if ESXi is unable to start. What are my options? Is continuing to use VMware Server is a good idea, knowing that I DO want to use the server for both virtualization and backup purposes. Thanks.

  Read the article

• VMWare hypervisor with only 1 network card?

  - by Rafiq Maniar

  VMWare hypervisor minimum requirements states that the minimum network requirements is: one NIC, plus one for Management interface (source: http://www.vmware.com/products/datacenter-virtualization/vsphere-hypervisor/requirements.html) It used to be possible to use 1 NIC only. Is anybody using the new versions of VMWare in this configuration? I ask because my colo provider will only provide me with 1 uplink (my server does have 2 NICs). I need to be able to run the VMs and also have remote management using only 1 NIC. Possible?

  Read the article

• VM connected to network but not to internet in VMware Player 6 on Windows 8.1 host

  - by user1257262

  So I am running Bitnami's MEAN stack in VMware Player 6.0.2 on Windows 8.1 and the VM connects just fine to the network: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG However, I am having a great deal of trouble getting the VM to communicate with the internet. No matter what sort of action I take (even something as simple as apt-get update), the machine just sits there and eventually fails to connect. Here is my VM's Network Adapter configuration: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG On my host Windows 8.1 computer, I actually have the VMware Bridge Protocol enabled but for VMware Network Adapters (VMnet1 and VMnet 8), but they are listed as having No Internet access in my Network and Sharing Center. I am not entirely sure if these adapters are relevant to connecting the VM to the internet, to be honest. This is the first time I have ever had an issue connecting a virtual machine to the internet. This problem is also happening with other VM's I am trying to run. Can someone tell me what I am doing wrong and how I can fix it?

  Read the article

• VMware Fusion on MacBook Pro running Vista, not working after installing a wireless card

  - by Shelley

  A tech friend installed VMware on my Mac so I could use my Windows programs as well. It worked great until I inserted my Sierra 881 USB wireless card while in VMware trying to get to the internet while on the road. It worked briefly, then the AT&T Communication manager won't respond when you click on the icon, I can't open Network and Sharing center, I can't sync my palm - shows it can't connect. Looks like it messed up several things, along with not being able to connect to the internet while in windows. This wireless cards works directly from the Mac - but I need internet while in Windows for some work I am doing. How do I uninstall this - when I try - it just gives me an endless reloading circle - not doing anything. I really need to sync my palm and get back to the way it was. I don't know much about VMware at all and I don't have access to my friend right now to get help.

  Read the article

• VMWare Player 5.0 Upgrade - Bridged Networking No Longer Works

  - by Syndog

  I've been using VMWare Player 4 on my Windows 7 PC, running my VMs under a bridged networking configuration without any problem. I settled on bridged networking two reasons... I often use VMs to host web applications for test purposes. I never could get NAT to work for me anyway, but no love lost, considering reason #1. Now that I've upgraded to VMWare Player 5, the situation has completely reversed. In other words, bridged networking no longer works at all, and NAT does. Has anyone else come across this? Any ideas on getting bridged networking to work again? This happens with both Windows and Linux guest OSes. VMWare Tools has been fully updated. I've tried the usual vmnetcfg.exe utility fix, to no avail.

  Read the article

• Converted VmWare Image does not boot in Virtual Box

  - by vBox Question

  I have a .vddx virtual image which boots in VmWare, but I'm having trouble getting it to work with Sun Virtual Box. In Sun Virtual Box, I created a new Virtual Machine and pointed it at the vddx file from VmWare. When I try to boot the virtual machine, Sun Virtual Box says that the volume is not bootable. VmWare is able to boot from this virtual machine. Does anyone have any suggestions about what might be causing the problem? Is there a conversion utility that I need to run? Any debugging options that I could turn on?

  Read the article

• What is thnuclnt, vmware

  - by Viktor

  Hi, after starting vmware, i noticed that there are more 10 processes called 'thnuclnt'. they're listening on the port 4000. (since i use this port for something else, it's annoying) I'm wondering what this is, since i didn’t find anything about it. I use Mac 10.5.8 with VMware Fusion 2.0.2 thx and best, Viktor

  Read the article

• Active Directory Group Policy: Script Errors

  - by ToreTrygg

  Hello all. Anyone having issues with AD group policy script errors when enabling VMware Fusion's "Sharing" feature? I've run into this problem in version 2.0 and 3.0. I have a logon script applied on an AD OU. It works fine on all Windows client workstations and in VMware Fusion only when the "Sharing" feature is NOT enabled. Any ideas would be much appreciated. Thanks.

  Read the article

• SLES 10 Sp3 VMware tools error on install

  - by Elgreco

  I installed SUSE enterprise server 10 SP3 on a Esx 4 server The problem starts with the installation of vmware tools. "VmwareTools-4.0.0-193498.tar.gz" The tools wont start: Unable to start services for vmware tools Paravirtual ISCSI module: Failed Guest vmxnet fast network device: Failed. I fixed the guest vmxent ERROR by changing the NIC mode. any hint? i cant be the only one with the same problem..

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >