Search Results

Search found 17129 results on 686 pages for 'wifi configuration'.

Page 13/686 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • Nameserver configuration error (Stealth NS records)

    - by Saif Bechan
    Hello i have a nameserver with a primary domain configured. Now i added a second domain, I have set NS records of the second domain to use the first domain, but i get some strange error. When i do the nameserver check at SIDN, for domains in the netherlands, i sais everything is right configured: Errors=0, Warnings=0, Informational=3 ** Summary: ACCEPTED centshopper.nl. ** Full check report: primary name server "ns1.rdshosting.nl." Info: name server looks correctly configured. secondary name server "ns2.rdshosting.nl." Info: name server looks correctly configured. secondary name server "ns3.rdshosting.nl." Info: name server looks correctly configured. ** DNScheck 4.2.6, 2010/03/12 23:19:58 CET+0100 Now when i check my dns settings over at http://intodns.com/centshopper.nl i get the following 2 errors: 1) Missing nameservers reported by parent FAIL: The following nameservers are listed at your nameservers as nameservers for your domain, but are not listed at the parent nameservers (see RFC2181 5.4.1). You need to make sure that these nameservers are working.If they are not working ok, you may have problems! ns3.rdshosting.nl 2) Stealth NS records sent Stealth NS records were sent: ns3.rdshosting.nl I am running plesk icw centos. In my opinion everything is ok. Does anyone know of this error and know what the possible cause would be. I have checked the first few hits on google already, and can't come up with a working solution. On a sidenote, can anyone explain to me what GLUE is and why i am not getting any. If you have been, thanks for reading!

    Read the article

  • Postfix server configuration values explained?

    - by Xeoncross
    I am trying to setup a single server to send out email from a single domain but I'm having trouble identifying the correct values for these Postfix settings. mydomain = example.com myhostname = example.com myorigin = $mydomain mydestination = $example, localhost.$example, localhost relayhost = mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all Can someone can explain them so I know what I should be setting them to? Things like $mydomain appear to be added at runtime by the script. This seems to work (emails come from [email protected]) but I am weary of using values for parameters I don't understand.

    Read the article

  • VMware Fusion configuration files missing

    - by jdmuys
    I need to set up port forwarding to my VM in Fusion 5. Everywhere on the net, the solution is described as editing the file: /Library/Application Support/VMware Fusion/vmnet8/nat.conf However, on my install, that file doesn't exist. Neither does the vmnet8 directory. Here is the full content of VMware stuff I have in /Library/Application Support/: /Library/Application Support/ VMware/ VMware Fusion AdminWritable Shared vmInventory usbarb.rules VMware Fusion That's right: /Library/Application Support/VMware Fusion/ exists but is empty. And there is no VMware folder in other Library directories on my system. I am running OS X 10.8.2. I just reinstalled Fusion 5.02, no change. Meanwhile, I have 3 VMs that work just fine. So how am I supposed to set up port forwarding with Fusion 5? Thanks, JD Edit: in a hunch, I tried ps ax | grep natd which returned: 9646 ?? S 0:00.01 /Applications/VMware Fusion.app/Contents/Library/vmnet-natd -s 7 -m /Library/Preferences/VMware Fusion/vmnet8/nat.mac -c /Library/Preferences/VMware Fusion/vmnet8/nat.conf So it seems that the configurations files are now in the directory /Library/Preferences/VMware Fusion. I'll work from here and edit this question as I make progress.

    Read the article

  • Cent OS ifcfg configuration for ranges of IP's with different netmask

    - by Aaron Schlegel
    I have 1 set of 30 public IP's with a netmask of 255.255.255.0 and another set of 30 IP's with a netmask of 255.255.255.128. Both sets of IP's also have different gateways. How can I virtually assign the IP's to the machine? I have tried creating ifcfg-eth0:0 ifcfg-eth0:1 ifcfg-eth0:X ect for each IP. Below is my ifcfg file with. I have this for each IP with the correct gateway IP and netmask for each of my 60 IP's. If I do ip addr show it does show all of the 60 addresses with the correct broadcast IP and netmask. However I can only use 30 of my IP's that are from the same netmask. Am I doing this correctly? If the IP's show up with ip addr show does that mean I have correctly assigned them to the machine virtually? I want to check before I blame my hosting company for not routing the IP's correctly. DEVICE="eth0:1" BOOTPROTO="static" DNS1="**.**.**.**" DNS2="**.**.**.**" GATEWAY="2**.**.***.126" HOSTNAME="localhost.localdomain" HWADDR="0*:19:**:**:**:**" IPADDR="2**.*.**.**" IPV6INIT="no" MTU="1500" NETMASK="255.255.255.128" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" Also is there a better way to do this? I have used ifcfg-eth0:0-range1 before to assign a range of IP's from the same netmask. Is it possible to do this with ranges with different netmask? Thanks!

    Read the article

  • help needed for server hardware configuration

    - by sansknowledge
    hi, basically i am software guy got recently promoted to managerial cadre which requires giving recommendation for server to run software developed by our company , the software is a work flow management and the db is oracle 11 , approximately the size of daily transaction would be around 40 gb, and it should be connected to ~ 150 client machines , the client machine will be growing. help on terms of cpu, processor, memory , rack and stack or raid (i really yet to understand that concept) OS, will be greatly appreciated.

    Read the article

  • Test Environment configuration Management

    - by TechTestDude
    I am after a solution which will enable me to enter all my hardware/software elements (sort of like resource management), create a set of 'test environments' and assign hardware and software to that test environment for a given period. The idea is so that everyone can see and update what they need in any given environment to meet their project needs. Does anyone know of any systems out there which can achieve this? Vendor recommendations are welcome, but please call out your interest in it.

    Read the article

  • RAID 5 configuration and future expansion

    - by Alexis Hirst
    hi, I am building a PC to act as a file server among other things, and I was wondering whether it is a good idea to create 2 partitions on the RAID 5 array, one for OS one for data, or to have a separate disk for OS and use array for data. Also, one day i may want to add another disk to the array, so would there be any issues if I had the OS partition on the RAID5 array when it came to resizing the data partition?

    Read the article

  • adding trac to apache2 configuration file

    - by Michael
    I currently have apache2 running from a mythtv/mythweb install. This made two config files available in sites-enabled. One of them ("default-mythbuntu") has the VirtualHost directive and seems like a normal file (except a change to the directory index). There is also a mythweb.conf file that only has directives and sets various variables for mythweb. I want to host a trac site as well. According to this site: http://trac.edgewall.org/wiki/TracOnUbuntu there are some setting I need to set for the Trac site. They give me directions for making a VirtualHost, but I think I should use the current VirtualHost and just add the directives (I'll need to change the default location they point to from the site above to just point to the trac location). Where should I put these directives? Can I make a Trac.conf with just the settings for Trac and enable it, or do I need to put them in the default-mythbuntu file? I don't like that later because it doesn't separate out the Trac configs. How does Apache know that the mythweb (and the trac.conf I want to make) belong to the virtualhost defined in the default-mythbuntu? It is the only virtualhost that is being defined on my system if that matters.

    Read the article

  • Software to check configuration and diagnostic of my PC is well configured

    - by aiacet
    Is there a utility, software or program than can check that my PC is well configured? Features I'm looking for: Checks to see if the communications between all the components works correctly Indicates if the OS is working properly Check the RAM and memory paging is configured correctly My system: AMD Phenom II X4 955 Black Box 125W Asus M4A785TD-M EVO Radeon HD5770 1GB GDDR5 Asus CoolerMaster GX 650W G.Skill 2x2GB PC3-12800 1600Mhz-787 4GBECO Western Digital 1TB SATAII 64MB Windows XP 32bit Antivirus and firewall: F-secure

    Read the article

  • Configuration Deployment to Linux Systems

    - by William
    Hello, I'm looking for a nice way to add / remote ips (and possibly interact with an asset inventory system to track where ips are), start / stop processes, download logs, and all around genearal system admin duties from one place. It's okay if I require more than 1 program. That would still be better than having 50 million terminals open and trying to trace ip assignments etc on whiteboards. I'd also like to know if anyone knows any good asset management programs. Best Regards, William

    Read the article

  • Apache conditional configuration

    - by pontus.enmark
    Is it possible to dynamically include/exclude blocks somehow using env variables or the like? Something in the lines of <LocationMatch ...> SetEnvIf X-Requested-With XmlHttpRequest xhr <If xhr> SSLVerifyClient none </If> <If !xhr> SSLVerifyClient optional </If> </LocationMatch>

    Read the article

  • Location directive in nginx configuration

    - by ryan
    I have an nginx server setup to act as a fileserver. I want to set the expires directive on images. This is how a part of my config file looks like. http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; location ~* \.(ico|jpg|jpeg|png)$ { expires 1y; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } I get the following error when I reload config - "Location directive not allowed here". Can someone tell me what the right syntax for this is? Thanks in advance. EDIT : Found the answer myself. Added it in a comment. Closing this.

    Read the article

  • CKEditor configuration, prefer img tag atrributes over inline style

    - by Unreason
    Looking for a way to disable a feature in CKEditor that messes with attributes height and width on my and converts them into inline styles. The version of CKEditor is 3.2 and I have access to config files. Along the same lines is there somewhere an overview (or procedure) for changing the way CKEditor produces html (I'd like to force it to do inline styles; except for images, plus some other changes) Thank you for taking the time to read this

    Read the article

  • Manipulating IIS7 Configuration with Powershell

    - by John Price
    I'm trying to script some IIS7 setup tasks in PowerShell using the WebAdministration module. I'm good with setting simple properties, but am having some trouble when it comes to dealing with collections of elements in the config files. As an immediate, example, I want to have application pools recycle on a given schedule, and the schedule is a collection of times. When I set this up via the IIS management console, the relevant config section looks like this: <add name="CVSupportAppPool"> <recycling> <periodicRestart memory="1024" time="00:00:00"> <schedule> <clear /> <add value="03:31:00" /> </schedule> </periodicRestart> </recycling> </add> In my script I would like to be able to accomplish the same thing, and I have the following two lines: #clear any pre-existing schedule Clear-WebConfiguration "/system.applicationHost/applicationPools/add[@name='$($appPool.Name)']/recycling/periodicRestart/schedule" #add the new schedule Add-WebConfiguration "/system.applicationHost/applicationPools/add[@name='$($appPool.Name)']/recycling/periodicRestart/schedule" -value (New-TimeSpan -h 3 -m 31) That does almost the same thing, but the resulting XML lacks the <clear/> element that is created with via the GUI, which I believe is necessary to avoid inheriting any default values. This sort of collection (with "add", "remove", and "clear" elements) seems to be fairly standard in the config files, but I can't seem to find any good documentation on how to interact with them consistently.

    Read the article

  • Virtual hosting in Varnish with individual vcl files for configuration

    - by Michael Sørensen
    I wish to use varnish to put in front of an apache and a tomcat on the same server. Depending on the ip requested, it goes to a different backend. This works. Now for most of the sites the default varnish logic will work just fine. However for some specific sites I wish to use custom VCL code. I can test for host name and include config files for the specific domains, but this only works inside the individual methods recv etc. Is there a way to include a complete set of instructions, in one file, per domain, without having to manage separate files for subdomain_recv, subdomain_fetch etc? And preferably without running seperate instances of varnish. When I try to include a file on the "root level" of default.vcl, I get a compilation error. Best regards, Michael

    Read the article

  • Cisco Aironet 1200 Series AP Configuration

    - by nonterrorist
    I am attempting to configure a new CISCO Aironet 1200 Series Access Point to have a fixed IP. I have been searching online and I have come to the conclusion that the default IP address of this device is 10.0.0.1. These are the steps I have taken: My machine is plugged directly into the Ethernet port (not the Console port) of the AP. My Ethernet adapter is set to 10.0.0.2. I have reset the AP by holding the Mode button while powering up the device. The issue remains that I can not access 10.0.0.1 through the web, nor can I ping that address.

    Read the article

  • CKEditor configuration options

    - by Unreason
    Looking for a way to disable a feature in CKEditor that messes with attributes height and width on my and converts them into inline styles. The version of CKEditor is 3.2 and I have access to config files. Along the same lines is there somewhere an overview (or procedure) for changing the way CKEditor produces html (I'd like to force it to do inline styles; except for images, plus some other changes) Thank you for taking the time to read this

    Read the article

  • Ram configuration 4x4 or 2x8?

    - by Carl B
    I am looking to upgrade my Ram to 16gigs and I am wondering if there is any distinct advantage of the way I do it. That being a 4x4 or 2x8 set up. In all my searching there have been a number of pros for each profile. I can find no benchmarck results for either setup as a compaison. So, if there are 2 profiles of the same speed, same voltage, same timing and same cas what would perform better or have a better over all benafit? A few examples from my search - a 4x4 set would lend a benafit in that if one stick failed, you only lose 25% of your Ram vs 50% in a 2x8 set up. a 2x8 set up would have less strain on the memory controler and motherboard. a 2x8 would generate less heat. a 2x8 set up is easier to over clock (not part of my need, but alot of the comparisons circled around the overclocability ease of the 2 stick set up). There is one outstanding benafit that I have found in at least the target company I have looked at and that is price. The 2x8 is nearly half the cost. My motherboard supports a max of 16 gigs and I have a 64 bit OS. Has anyone seen any performance comparisons or is 16 gb just 16 gb no matter how you slice it? And is there any merit to the above pros? Edit: as per the mobo specs - Main Memory • Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600*/1800*/2133* (OC) DRAM, 16GB Max

    Read the article

  • visually documenting web server configuration and infrastructure

    - by Alex Ciarlillo
    I have just finished a large re-organization and update of our institutions web server(s). This server hosts 3 virtual hosts, 3-4 blogs, 2 wikis, some legacy static HTML pages, and many hosted documents (PDF, .jpg, .xls). I have organized the site into a structure of something like: /var/www/sites/vhost1, vhost2, vhost3 .../wordpress/blogX .../mediawiki/wikiX Data is in a seperate directory structure so I can run a cron task over it to make sure it is all writeable and such. I then symlink to these data directories for each application. /var/www/data/vhost1, vhost2, vhost3 .../wordpress/blogX/uploads .../mediawiki/wikiX/images All Apache configs are in /etc/httpd/conf.d/vhosts.d/vhost1,2,3.conf On top of this there is also a testing server which mirrors this setup. Once changes are fully tested, they are rsynced down to the live server. All the wordpress installs and mediawiki installs are straight form SVN and updates are done by switching branches or "svn up". So my question is how can I best document to share with a) co-workers, b) possible future replacement, c) myself 6 months from now. Obviously I can make a wiki page, excel document, whatever and fill it with text, but I am looking for a more visual representation that I can use to explain the architecture to less-technical people. Ideally it would be awesome if this visual representation could then be expanded to get more technical details.

    Read the article

  • Xml configuration versus Annotation based configuration

    - by Abarax
    In a few large projects i have been working on lately it seems to become increasingly important to choose one or the other (XML or Annotation). As projects grow, consistency is very important for maintainability. My question is, what do people prefer. Do you prefer XML based or Annotation based? or Both? Everybody talks about XML configuration hell and how annotations are the answer, what about Annotation configuration hell?

    Read the article

  • What is your favorite way to read XML files using C#?

    - by stacker
    Let's take this xml structure as example: <?xml version="1.0" encoding="utf-8"?> <Configuration-content> <XFile Name="file name 1" /> <XFile Name="name2" /> <XFile Name="name3" /> <XFile Name="name4" /> </Configuration-content> public class Configuration { public XFile[] Files { get; set; } } public interface IConfigurationRipository { Configuration Get(); void Save(Configuration entity); } I wonder what's the best way to do that. The task is to implement IConfigurationRipository using your favorite approach.

    Read the article

  • HSDPA modem only working on certain USB ports

    - by nabulke
    Depending on which USB port I use to connect my HSDPA modem, the network manager will connect to the internet or not. I used to work (i.e. established a internet connection automatically) on all ports, but over time it simply stopped on some ports. lsusb output in all cases looks like that (Device ID varies depending on USB port): Bus 001 Device 009: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Any ideas what could cause this behaviour? What can I do to fix this? ADDED One additional information about the modem: if connected via USB it will be available as as harddrive AND as a HSDPA modem (kind of a duality...). In the error case, it will only be shown as a harddrive. ADDITIONAL INFO AS REQUESTED MODEM NOT WORKING Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:8000 Dell Computer Corp. BC02 Bluetooth Adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 007: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 005: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 003: ID 413c:0058 Dell Computer Corp. Port Replicator Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub laptop:~$ dmesg | grep 'usb' [ 0.225371] usbcore: registered new interface driver usbfs [ 0.225387] usbcore: registered new interface driver hub [ 0.225418] usbcore: registered new device driver usb [ 0.504291] usb usb1: configuration #1 chosen from 1 choice [ 0.504767] usb usb2: configuration #1 chosen from 1 choice [ 0.505046] usb usb3: configuration #1 chosen from 1 choice [ 0.505601] usb usb4: configuration #1 chosen from 1 choice [ 1.061064] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 1.192636] usb 1-6: configuration #1 chosen from 1 choice [ 1.447006] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1.634908] usb 2-2: configuration #1 chosen from 1 choice [ 1.708164] usb 1-6.1: new high speed USB device using ehci_hcd and address 4 [ 1.801668] usb 1-6.1: configuration #1 chosen from 1 choice [ 2.076279] usb 1-6.1.1: new low speed USB device using ehci_hcd and address 5 [ 2.174932] usb 1-6.1.1: configuration #1 chosen from 1 choice [ 6.580315] usb 1-6.1.2: new high speed USB device using ehci_hcd and address6 [ 6.683479] usb 1-6.1.2: configuration #1 chosen from 1 choice [ 20.018671] usbcore: registered new interface driver btusb [ 20.131703] usbcore: registered new interface driver usb-storage [ 20.131988] usb-storage: device found at 6 [ 20.131991] usb-storage: waiting for device to settle before scanning [ 20.207981] usb 1-6.1.2: USB disconnect, address 6 [ 20.291499] usbcore: registered new interface driver hiddev [ 20.297052] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1.1/1-6.1.1:1.0/input/input6 [ 20.297465] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.7-6.1.1/input0 [ 20.297534] usbcore: registered new interface driver usbhid [ 20.297803] usbhid: v2.6:USB HID core driver [ 26.552360] usb 1-6.1.2: new high speed USB device using ehci_hcd and address 7 [ 26.663506] usb 1-6.1.2: configuration #1 chosen from 1 choice [ 26.709628] usb-storage: device found at 7 [ 26.709631] usb-storage: waiting for device to settle before scanning [ 26.732387] usb-storage: device found at 7 [ 26.732390] usb-storage: waiting for device to settle before scanning [ 31.709568] usb-storage: device scan complete [ 31.733676] usb-storage: device scan complete MODEM WORKING Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:8000 Dell Computer Corp. BC02 Bluetooth Adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg | grep 'usb' [ 0.134811] usbcore: registered new interface driver usbfs [ 0.134826] usbcore: registered new interface driver hub [ 0.134858] usbcore: registered new device driver usb [ 0.360327] usb usb1: configuration #1 chosen from 1 choice [ 0.360783] usb usb2: configuration #1 chosen from 1 choice [ 0.361061] usb usb3: configuration #1 chosen from 1 choice [ 0.361611] usb usb4: configuration #1 chosen from 1 choice [ 1.144122] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1.346896] usb 2-2: configuration #1 chosen from 1 choice [ 1.588072] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 1.761204] usb 3-1: configuration #1 chosen from 1 choice [ 5.972042] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 6.115438] usb 1-1: configuration #1 chosen from 1 choice [ 19.990565] usbcore: registered new interface driver usbserial [ 19.991429] usb-storage: device found at 4 [ 19.991432] usb-storage: waiting for device to settle before scanning [ 20.017260] usbcore: registered new interface driver usb-storage [ 20.017305] usbcore: registered new interface driver usbserial_generic [ 20.017308] usbserial: USB Serial Driver core [ 20.017817] usb-storage: device found at 4 [ 20.017820] usb-storage: waiting for device to settle before scanning [ 20.070796] usbcore: registered new interface driver btusb [ 20.229525] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 20.229776] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 20.229843] usbcore: registered new interface driver option [ 20.230396] usbcore: registered new interface driver hiddev [ 20.246280] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6 [ 20.246438] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0 [ 20.246479] usbcore: registered new interface driver usbhid [ 20.246483] usbhid: v2.6:USB HID core driver [ 25.436579] usb-storage: device scan complete [ 25.437674] usb-storage: device scan complete

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >