Search Results

Search found 4224 results on 169 pages for 'wireless'.

Page 13/169 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

• How to prevent wireless network asking password when briefly out of range

  - by Ian Mackinnon

  When I'm connected to a wireless network from quite far away I sometimes briefly lose the connection. Then Network Manager prompts me to re-confirm the password as if it suspected that was the problem that caused the loss of connection (the password is already filled in in the dialog box). Is this normal behaviour? Can I prevent it from happening and have Network Manager automatically reconnect without the password dialog box when the wireless network comes back into range? I'm using 10.04 (32bit, Gnome) on an Acer Aspire one.

  Read the article

• Unable to keep the connecting using a wireless bridge

  - by dan

  I am running Ubuntu 12.04 on a dell inspiron desktop (core 2 duo) and am using wicd to manage my network/wifi. I've found that the WiFi card in the machine has trouble staying connected to my router (I believe this is a function of distance between the two), so I've taken an old Belkin F5d7231 wireless router and installed dd-wrt on it to use as a wireless bridge hoping that it will have better reception. I think everything up through the wireless bridge is working OK since I have no problems accessing the internet through it with my MacBook. The problem arises when I try to hook the ubuntu machine up to the wireless bridge. It will connect for a few minutes, but it will quickly disconnect without clear triggering event; it may be more likely to disconnect if there is a heavy traffic load going over it (could be something as simple as "cat big_text_file" in an ssh session). I've tried switching from dhclient to dhcpcd without much improvement. Here is the output from the syslog when it connects: Jun 30 17:10:08 Chicabuntu dhcpcd[28278]: wlan1: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28278]: wlan1: exiting Jun 30 17:10:08 Chicabuntu dhcpcd[28312]: eth0: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28312]: eth0: exiting Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv6 no longer relevant for mDNS. Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:10:08 Chicabuntu avahi-daemon[1041]: Withdrawing address record for fe80::21c:c4ff:fe31:1a83 on eth0. Jun 30 17:10:08 Chicabuntu kernel: [15184.976127] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:10:08 Chicabuntu kernel: [15185.010805] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:10:08 Chicabuntu dhcpcd[28347]: eth0: dhcpcd not running Jun 30 17:10:08 Chicabuntu dhcpcd[28347]: eth0: exiting Jun 30 17:10:08 Chicabuntu kernel: [15185.180156] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:10:08 Chicabuntu kernel: [15185.212785] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:10:10 Chicabuntu kernel: [15187.027445] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex Jun 30 17:10:10 Chicabuntu kernel: [15187.027452] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX Jun 30 17:10:10 Chicabuntu kernel: [15187.028300] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: dhcpcd 3.2.3 starting Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: hardware address = 00:1c:c4:31:1a:83 Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: DUID = 00:01:00:01:17:81:85:79:00:1c:c4:31:1a:83 Jun 30 17:10:10 Chicabuntu dhcpcd[28353]: eth0: broadcasting for a lease Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv6 for mDNS. Jun 30 17:10:11 Chicabuntu avahi-daemon[1041]: Registering new address record for fe80::21c:c4ff:fe31:1a83 on eth0.*. Jun 30 17:10:20 Chicabuntu kernel: [15197.568016] eth0: no IPv6 routers present Jun 30 17:10:29 Chicabuntu dhcpcd[28353]: eth0: offered 192.168.1.111 from 192.168.1.254 Jun 30 17:10:29 Chicabuntu dhcpcd[28353]: eth0: checking 192.168.1.111 is available on attached networks Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: leased 192.168.1.111 for 86400 seconds Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: adding IP address 192.168.1.111/24 Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.111. Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: adding default route via 192.168.1.254 metric 0 Jun 30 17:10:30 Chicabuntu dhcpcd[28353]: eth0: exiting Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv4 for mDNS. Jun 30 17:10:30 Chicabuntu avahi-daemon[1041]: Registering new address record for 192.168.1.111 on eth0.IPv4. Jun 30 17:10:30 Chicabuntu dhcpcd.sh: interface eth0 has been configured with new IP=192.168.1.111 Jun 30 17:10:39 Chicabuntu ntpdate[28439]: adjust time server 91.189.94.4 offset 0.001915 sec And here is the syslog from when it shuts down the connection without reason: Jun 30 17:12:15 Chicabuntu kernel: [15312.575455] tg3 0000:3f:00.0: eth0: Link is down Jun 30 17:12:16 Chicabuntu dhcpcd[28603]: eth0: sending signal 1 to pid 28361 Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: received SIGHUP, releasing lease Jun 30 17:12:16 Chicabuntu dhcpcd[28603]: eth0: exiting Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Withdrawing address record for 192.168.1.111 on eth0. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.1.111. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv4 no longer relevant for mDNS. Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: removing default route via 192.168.1.254 metric 0 Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Interface eth0.IPv6 no longer relevant for mDNS. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:12:16 Chicabuntu avahi-daemon[1041]: Withdrawing address record for fe80::21c:c4ff:fe31:1a83 on eth0. Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: netlink: No such process Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: removing IP address 192.168.1.111/24 Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: netlink: Cannot assign requested address Jun 30 17:12:16 Chicabuntu dhcpcd[28361]: eth0: exiting Jun 30 17:12:16 Chicabuntu dhcpcd.sh: interface eth0 has been brought down Jun 30 17:12:17 Chicabuntu kernel: [15313.612141] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:12:17 Chicabuntu kernel: [15313.644703] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:12:17 Chicabuntu dhcpcd[28674]: wlan1: dhcpcd not running Jun 30 17:12:17 Chicabuntu dhcpcd[28674]: wlan1: exiting Jun 30 17:12:17 Chicabuntu dhcpcd[28708]: eth0: dhcpcd not running Jun 30 17:12:17 Chicabuntu dhcpcd[28708]: eth0: exiting Jun 30 17:12:17 Chicabuntu kernel: [15313.912147] tg3 0000:3f:00.0: irq 44 for MSI/MSI-X Jun 30 17:12:17 Chicabuntu kernel: [15313.944746] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 30 17:12:18 Chicabuntu kernel: [15315.592569] tg3 0000:3f:00.0: eth0: Link is up at 100 Mbps, full duplex Jun 30 17:12:18 Chicabuntu kernel: [15315.592576] tg3 0000:3f:00.0: eth0: Flow control is on for TX and on for RX Jun 30 17:12:18 Chicabuntu kernel: [15315.593399] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::21c:c4ff:fe31:1a83. Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: New relevant interface eth0.IPv6 for mDNS. Jun 30 17:12:20 Chicabuntu avahi-daemon[1041]: Registering new address record for fe80::21c:c4ff:fe31:1a83 on eth0.*. Jun 30 17:12:29 Chicabuntu kernel: [15325.680019] eth0: no IPv6 routers present If this isn't useful, I can also post the wicd log, but that is kind of long. If anyone could help me I would be eternally grateful.

  Read the article

• Broadcom BCM4313 wireless slow and high-latency

  - by Florin Andrei

  Ubuntu 12.10 64 bit on a Dell Latitude E6330 laptop. Wireless is pretty slow. It gets connected quick enough, but then it acts like a dialup connection. My ssh sessions over WiFi are slow and laggy. Even browsing is slow, the pages are loading like it's 1998. This does not depend on the access point, it's the same both at home and at work. Other systems work fine on these access points. I had an older Dell laptop before, different WiFi hardware, and it was much faster over the same wireless access points. Is this a known issue with this hardware? If so, any solutions?

  Read the article

• Can't connect to wireless on Lubuntu

  - by migwke

  I have a CISCO 802.11b WIFI Mini PCI LAN card in my IBM ThinkPad T30 laptop. Is this wireless card compatible with Lubuntu? I have Lubuntu installed and it just won't connect. It keeps saying that it is trying to configure then it says that it is connected but it does not work. I know that the wireless network is working correctly because I can connect to it with all my other devices and it works on this very same laptop when I am running Windows. I added the following commands to blacklist.conf, but still no luck blacklist padlock_aes blacklist geode_aes

  Read the article

• After upgrading to Ubuntu 12.04, my broadcom wireless sta driver is not working

  - by Nuwan Aluwihare

  I upgraded my HP DV5-1000US Laptop to Ubuntu 12.04. But I cannot get it connected to the Wireless. I went through the settings, Hardware, Additional Drivers and it says that "No proprietary drivers are in use on this system". Also it says "Broadcom STA Wireless Driver" is not activated. I tried to activate it after got my laptop connected to the net through a wired connection, but it says "Sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log"

  Read the article

• Internet Timeouts with TP-Link TL-WN821N wireless usb stick - existing solutions dont work

  - by Sheena

  I'm running Ubuntu12.04 and I'm trying to get a TP-Link TL-WN821N to work. The solution from Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick didn't work for me. Neither has anything else... I've installed rtl8192cu as per instructions I found elsewhere to no avail. The symptoms I am experiencing are: When I plug in the device the PC can see and connect to wireless networks fine. The network I'm using has internet access and the signal strength is pretty strong. I can't ping and I can't browse the internet (timeout). Any ideas? I'm not sure what the next step would be or what information would be useful at this point.

  Read the article

• Wireless Very slow with 13.10 and BCM4313

  - by RyanCheu

  I have a laptop with the BCM4313, and it was working perfectly in Ubuntu 13.04, but I recently upgraded to 13.10 and now my wireless performance is horrible. Initially it didn't work at all, but I removed the wl driver and use the brcmsmac driver instead. Now when I boot up it works at the start, but gets progressively slower. My Android device is reporting 10Mbps down/20Mbps up, but my laptop only gets 1up/down. Does anyone know a solution? I really need my wireless to work, is my best option to just reinstall on 13.04? Thanks!

  Read the article

• 12.04 in Virtualbox is keep losing my wireless connection

  - by Derek

  I've Windows 7 as the Host OS, Ubuntu 12.04 as the guest and a Netgear WG111v2 as the USB Wireless device. Its connected to an open Wi-Fi network at work to bypass my works crazy strict filtering, When on the domain. I currently have network eth0 turned off in the virtualbox settings so the only network source would be through the USB device at wlan1. Its odd but the wireless seems extremely temperamental, I constantly have to ifconfig wlan down then ifconfig wlan1 up to get it back online. I know this might be super vague just curious if anyone has tried something like this or run into anything like it to point me in a direction I might not be seeing.

  Read the article

• Wireless connect- Webcam activation- MBR repair/rebuild

  - by Rick

  Evening: I've NEVER had so much difficulty with Ubuntu. I got "Ubuntu Made Easy" and couldn't believe it hasn't done a damn thing to help solve the problems!!! #1. Since install of 12.04 I haven't been able to connect to wireless. Have done everything I can find/think of. Laptop indicates it's receiving wireless. Ran all updates, restricted extras, etc. NOTHING!! Tried to find how to activate built-in webcam (it worked when I installed O.S.) NOTHING; tried to find MBR repair/rebuild terminal command.. NOTHING!!! The book has has been useless, so far!! I really have to solve these problems, otherwise laptop and UBUNTU are worthless!!! Hope someone can help me out with any or all the problems I've listed. Sure would appreciate it!!!!!!!!!!! (laptop HP 2000-210US) Thanks: Rick

  Read the article

• Newb: First install of ubuntu, no wired or wireless

  - by Ienzo

  Ran 12.04 through a usb drive for a day or so, and had no issues outside of some latency that is more due to the lack of ram on my aspire one D255e than to OS. Had wireless running with no issue, and wired tested as working also. Ran the install and removed windows 7, wireless network is detected but ethernet is not, and neither gets connection. Disabled proprietary driver and rebooted, re-enabled driver and still neither. I know nothing of ubuntu yet! What do? _<

  Read the article

• wireless not showing up in network manager applet.

  - by Vidur Vishnudutt

  there is only the wired connection option available when the menu drops down. i have installed a belkin wireless g card for my desktop. it has been used before on this version of ubuntu 10.10, but after upgrading it shows only wired networks. enable networking and enable notifications have both been ticked. still only wired networks coming. im using ubuntu 10.10 maverick meerkat on my desktop comp and im an absolute begginer at ubuntu. can some one please help me re enable wireless on my comp?

  Read the article

• Can't connect to wireless network in Lubuntu

  - by mike

  I have a CISCO 802.11b WIFI Mini PCI LAN card in my IBM ThinkPad T30 laptop. Is this wireless card compatible with Lubuntu? I ran it off a Live CD and it showed the network I want to connect to – but it just won't connect. I tried installing Lubuntu and during installation it also tried to connect to the same network and still nothing. I know that the wireless network is working correctly because I can connect to it with all my other devices and it works on this very same laptop when I am running Windows.

  Read the article

• 12.04 LTE wireless not working in Dell Insprion E1405

  - by Rey

  i have the windows XP media edition running on my Dell Inspiron E1405 with all the hardware working properly. Recently i wipe out the windows and installed the Ubuntu 12.04 LTE using the CD and the installation process completed successfully but my wireless stopped working after. computer wireless indicator turned off and i can't even do the wired connection as well. it is Broadcom BCM4311 adapter. i tried to download the driver from the dell website but they don't have the Linux version of the driver if its that causing the problem. i appreciate your help that can solve my issue. thank you.

  Read the article

• BCM4313 Wireless on Ubuntu Server 12.04

  - by KJ Tsanaktsidis

  I'm trying to run an old netbook with Broadcom BCM4313 wireless as a print server with Ubuntu Server 12.04. Setting up the wireless without the GUI, however, is proving problematic. I do think however I've narrowed down the problem. I've tried both the wl driver (from bcmwl-kernel-source) as well as the (included) brcmsmac driver. With both of them, when I issue the command iwlist wlan0 scanning (eth1 for wl), I only see neighbouring networks- not my own. I believe this might be because my networks are n-only, but my neighbouring networks are mixed mode (I suspect this because the output of iwlist wlan0 scanning shows "Bit Rates" only as high as 54 Mb/s). Any ideas how to go about getting this thing to connect?

  Read the article

• Ubuntu 12.04 wireless does not detect networks

  - by dudeitsdevin90

  I installed Ubuntu on a partition of my MacBook Pro. Wireless connections work fine when I switch to OSX, but the wireless networks are not even detected when I boot Ubuntu. I installed Wicd as a new network manager, but I'm still having the same problem. Ubuntu works on a wired connection though. I have searched the web for a solution... similar questions have been asked but I have not been able to find a way to fix this problem. Any help would be greatly appreciated.

  Read the article

• Still no wireless after b43 with Dell Inspiron 1525 (Ubuntu 12.04)

  - by DanielleN

  So I followed the instructions here http://ubuntuforums.org/showthread.php?t=1974006 about how to solve this issue. It worked for a bit and then stopped. After doing a modprobe I could at least see my network and click on it but it would not connect (I can always see it if I look under the listed wireless networks under VPN Connections, however). I'm thinking, from what I read at least, the issue might be that my wireless switch was on during those first steps. Do I now have to undo the b43 install and do it again? Or is there something else I could try? I just made the switch to Linux yesterday, so I am hesitant at this point to mess with anything on my own. I should note now that it was installed by someone who knows what they are doing, so we are all good on that front.

  Read the article

• Slow internet connection with a Digicom Wireless 11n 300m (rt2800)

  - by beboka8

  After upgrading to ubuntu 11.10 the speed of my internet connection has considerably reduced. I surf on internet using a wireless usb adapter Digicom Wireless 11n 300m which works with rt2800usb driver. The fact is, on the installation cd there's no tracks of that driver but instead of it there is another one called rt2870 which I tried to load using ndiswraper, but it did not recognize any hardware. I'm not sure the solution of my problem is simply changing the driver, but I have no other ideas. Can anyone help me?

  Read the article

• Windows Wireless Drivers - Install

  - by Justin Y.

  I have nearly ended my journey of making a dual-boot windows xp and ubuntu computer. Along with version 12.04, came the problem with my NetGear WNDA3100v2 wireless adapter. It wasn't compatible. My last step in my adventure is to install the software called Windows Wireless Drivers. I have internet access on my laptop and a flash drive. It would be preferable to receive a link to this program, because I see no link on the website, and I can't download it from the Ubuntu Software Center. Thanks.

  Read the article

• Setting up wireless drivers in Ubuntu 9.10?

  - by xdya

  I've just installed ubuntu to a notebook, deleting the windows xp that was installed before, so now nothing works I couldn't solve the problem of getting the blank screen with the versions 12.. and 10.. so now there is 9.10 installed, which works fine. Well, it boots up at least. I can't get working the drivers though. I'm totally new to linux, and I've read in some forums that in this version you have to install all of them yourself, because the system won't detect them automatically. Therefore I tried to find the drive for my wireless card, but actually I have no clue how to get it work. Could someone please help me out? So here are the specs: System installed as mentioned: Ubuntu 9.10 Computer: Acer Aspire 3100 Wireless according to laptop specs: 10/100 Fast Ethernet, Wake-on-LAN ready, Acer InviLink™ 802.11b/g Wi-Fi CERTIFIED I would really appreciate some detailed description to setting up my internet Thanks!!

  Read the article

• Wireless hardware is not getting switched on in 12.04

  - by user89733

  I have recently installed ubuntu 12.04 in sony vaio VPCEH. And updated all the available updates through update manager. When i switch on the bluetooth/wireless (hardware switch), only the bluetooth is turning on. For wireless, it shows as "hardware disabled". P.S: It was working fine few days before. Suddenly It is not turning on. i just get an answer for this question while googling. just enter the following command in the terminal. "sudo rfkill unblock all" This will unblock all hardware ports. that's it!!!!!! :) It works,..

  Read the article

• Newly installed DIR-615 - how to connect to the wireless?

  - by JK123

  I've just installed a D-Link DIR 615, but can't figure out how to connect to the wireless.. When I double click my wireless icon in the tray, it does show the new network. Its starts the "WiFi protected setup wizard" and the first thing it asks for is the "Device Ownership Password". I have no idea what that is - I've tried the PIN and the router password. On the next page it says: SSID: _(name)__ Security type: _wpa2 personal aes ccmp_ Password: _some long key that is not what I entered during router setup_ I change the key to the one I created when setting up the router. I've also tried leaving the key as it is shown in the dialog. But it does not connect either way. All it says is "Configuration failed" So how do I connect to the new wireless network??

  Read the article

• Wireless Activity Monitoring for PCI DSS Compliance

  - by dkusleika

  In an effort to be PCI DSS compliant, I took a trustkeeper.net questionnaire. I failed the question that asks Is the presence of wireless access points tested for by using a wireless analyzer at least quarterly or by deploying a wireless IDS/IPS to identify all wireless devices in use? (SAQ #11.1) My only wireless access point is outside my firewall, so even if you cracked my wireless you couldn't get inside my domain (unless you crack that too). My firewall doesn't have IPS and I couldn't tell if it had IDS. I looked around for a wireless analyzer, but what I found was $500, which is a little pricey for my size business. And even if I got it, I'm not sure I would understand what it tells me. Surely there are smaller/less sophisticated businesses that take credit cards and have solved this. My questions are: What are the risks if someone were to crack my wireless? (Could they read all internet traffic? Just wireless traffic? Just use my internet connection?) And what is the best/cheapest way to test my connection point quarterly? Should I buy the $500 analyzer? Domain is Windows Server 2000. Firewall is Sonicwall Pro 2040. Router is 8 port D-link.

  Read the article

• wireless to wired internet

  - by Mark T

  My wife uses an old computer which doesn't really like having an internet connection via a USB wireless adapter. I've tried several, and none have been satisfactory. The connection gets dropped often and it is frustrating for her. A wireless card also had the same trouble. Repositioning the computer made no difference. (Two laptops, nearby, connect just fine and stay up, so it isn't the router.) However, the computer always worked well when I had an Ethernet cable connected to it. I know there is a box which will connect to my wireless network and provide an Ethernet cable connection. But the terminology used is so complex, I can't tell what it is I really need. In case that wasn't clear, here it is in different words: What I need is just the opposite of a wireless router. My wireless router takes my cable modem's Ethernet connection and makes it available to wireless clients. What I want is a box which is a wireless client to my wireless router and provides an Ethernet cable connection that I can connect to any device. I need to know the right name for a box with such capabilities. If you know of some inexpensive examples, that would also be helpful. I'm running a wireless G network with a Linksys Router.

  Read the article

• Crash after plugging in the Logitech H600 wireless transmitter

  - by SneezyDinosaur

  I recently bought the Logitech H600 Wireless Headset. When I plug in the USB wireless transmitter, Ubuntu 12.04 LTS crashes. How does that come and what do you suggest me to do? Same problem here, as soon as the H600 headset is plugged in 12.04 crashes. Relevant snip from /var/log/Xorg.failsafe.log is below, complete log can be found as a gist [ 2676.496] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [ 2676.496] (II) Using input driver 'evdev' for 'Logitech Logitech Wireless Headset' [ 2676.496] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2676.496] (**) Logitech Logitech Wireless Headset: always reports core events [ 2676.496] (**) evdev: Logitech Logitech Wireless Headset: Device: "/dev/input/event16" [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Vendor 0x46d Product 0xa29 [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute multitouch axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found keys [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as mouse [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as keyboard [ 2676.496] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.3/input/input16/event16" [ 2676.496] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 10) [ 2676.496] (**) Option "xkb_rules" "evdev" [ 2676.496] (**) Option "xkb_model" "pc105" [ 2676.496] (**) Option "xkb_layout" "us" [ 2676.497] (II) evdev: Logitech Logitech Wireless Headset: initialized for absolute axes. [ 2676.497] Backtrace: [ 2676.497] 0: /usr/bin/X (xorg_backtrace+0x37) [0xb7698637] [ 2676.497] 1: /usr/bin/X (0xb7510000+0x18c3ba) [0xb769c3ba] [ 2676.497] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb74ed40c] [ 2676.497] 3: /lib/i386-linux-gnu/libc.so.6 (0xb7155000+0x135d32) [0xb728ad32] [ 2676.497] 4: /usr/bin/X (XIChangeDeviceProperty+0x16c) [0xb7630b0c] [ 2676.497] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb3f4a000+0x634e) [0xb3f5034e]

  Read the article

• Wifi installation issues with a Sitecom 300N x2 Wireless Network dongle

  - by SlyrNemesis

  Linux newbie here, anyway so here is the problem, I run Ubuntu 10.10 and I have a Sitecom 300N x2 Wireless Network dongle with chipset 8192SU, I used ndiswrapper to install my Windows Wireless driver because Sitecom doesn't have a linux driver, it says hardware present but it doesn't find any Wireless networks, nor does it connect to one. What can I do? The command "dmesg | grep ndis" gave this output in the terminal: [ 9.999954] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 11.111901] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferAndNetBufferList' [ 11.111973] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists' [ 11.112099] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMRegisterMiniportDriver' [ 11.112161] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateMdl' [ 11.112220] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMDeregisterMiniportDriver' [ 11.112280] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeNetBufferListPool' [ 11.112339] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferListPool' [ 11.112399] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeMdl' [ 11.112457] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMAllocatePort' [ 11.112515] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMNetPnPEvent' [ 11.112573] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMFreePort' [ 11.112631] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMSendNetBufferListsComplete' [ 11.112780] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMSetMiniportAttributes' [ 11.112848] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisOpenConfigurationEx' [ 11.112946] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMIndicateStatusEx' [ 11.113017] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMOidRequestComplete' [ 11.113112] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateMemoryWithTagPriority' [ 11.113200] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem' [ 11.113271] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem' [ 11.113342] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisQueueIoWorkItem' [ 11.113413] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeNetBufferList' [ 11.113481] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionBind' [ 11.113547] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionBindClass' [ 11.113613] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionUnbindClass' [ 11.113680] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionUnbind' [ 11.113742] ndiswrapper (load_sys_files:206): couldn't prepare driver 'net8192su' [ 11.148888] ndiswrapper (load_wrap_driver:108): couldn't load driver net8192su; check system log for messages from 'loadndisdriver' [ 11.365200] usbcore: registered new interface driver ndiswrapper [ 12.818573] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.819183] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.819796] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.820505] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.821115] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.821726] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.822339] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.822948] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.823560] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.824204] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy

  Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >