Search Results

Search found 6235 results on 250 pages for 'hdd low'.

Page 130/250 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• Actual High Speed USB flash drive

  - by CSkau

  I'm looking to upgrade my EEE 1000H by possibly replacing the HDD with simple (internal) usb connected storage. The problem I'm having now is that I can't seem to find any actual high speed usb sticks. They all proclaim high speeds, but usually turn out to be ~30 mb/s - much lower than the 60 mb/s (480 mbit/s / 8 ) I understand USB 2.0 is at - no ? Can anyone enlighten me as to why no USB sticks seem to go past that low bar or alternatively point me in the direction of some actual high speed usb sticks ? Any help is greatly appreciated :) Cheers!

  Read the article

• Having problems with Grub2 booting Ubuntu from my External Hard Drive

  - by anonymous

  I installed Ubuntu on my external hard drive but it won't boot on my laptop. what do i do? i did some reading and traced the source of the problem to grub2. Apparently, grub2 doesn't use the device's UUID, and uses the linux directory instead (/dev/sdf2). This means that whenever i plug my E-HDD into a system that has a different number of drives connected to it, i won't be able to boot without editting the boot command. I don't understand it too well but that's what i got from what i read. Is there anyway to fix this?

  Read the article

• Infected Win XP disk not openable on a Vista computer

  - by Retired57

  How can I read a WinXP partioned disk that is infected and shows up on a USB connection to Win Vista computer as a single partition that Vista cannot see the contents? The XP computer HDD is partioned into 4 partitions. It became infected, and all attempts to clean it have failed. Applications begin to launch, but are then shut down by the infecting agent. Using a major Anti-virus Co. boot disk (which was unable to connect to the Web, probably because the infecting agent stopped it) with virus definitions dated after the disk became infected, the resultant scan showed no infection. I bought a USB cable to connect the IDE drive to my Vista computer, but when I open Win Explorer, it sees the disk, but does not show any contents. It indicates it is a single partition that is valid. However in all the ways I have tried it does not show drive contents. Any suggestions on what to do next?

  Read the article

• Is a PCIE X1 card for USB 3.0 worth it?

  - by lelouch

  I have a portable HDD on USB 3.0, and soon I'll have a 32gb flash drive on USB 3.0 as well. My motherboard is pretty old - and the next time I'll upgrade it is when I get a new CPU/mobo/ram. Slots on my mobo: PCIE X16 - For my GTX 260 2xPCI PCIE X1 I'm considering purchasing a PCI express X1 card like this - http://www.ebay.com.au/itm/PC-Laptop-2-USB3-0-Ports-PCI-E-PCI-Express-X1-Card-New-/280772000446?pt=AU_Networking&hash=item415f50babe Now the question: What are realistic (read/write) speeds I'll get in this setup, assuming I have 1 USB 3 device connected at a time, and the bottleneck is the PCIE?

  Read the article

• Creating ISO image of NTFS partition in Ubuntu

  - by Pappai

  Hi, I have a system that has to be formatted often because of the specific use of it (Use it in internet cafe). I have to install the drivers and apps each time. That is a time consuming and cumbersom task for me. I want to install windows, drivers, apps etc. once and create a backup of the entire C:\ drive, and keep it in a linux partition so that I can restore the OS with all the apps & drivers ready to go! I have ubuntu live CD with me and I have created a linux partition (ext4) in the HDD. My question is: How can I create an ISO image of the C:\ drive (ntfs disk) in Ubuntu and store it in the linux partition?

  Read the article

• Computer only booting after POWER ON/OFF 10 times or more?

  - by Jan Gressmann

  Hi fellow geeks, recently my computer started to behave like an old car and won't start up anymore unless I flip the power switch repeatedly. What happens when I power it on: CPU fans spins briefly and very slowly, then it stops Same with GPU fan No BIOS beeps or HDD activity Screen stays black After turning it on and off for like 10 times, it'll eventually boot like normal and run smooth without any problems what-so-ever. But I'm worried it might eventually die completely. Anyone know the most common cause of this? Maybe I should just leave the computer powered on? :)

  Read the article

• ACHI drivers for W8.1 with amd

  - by LeiNaD_87

  I hope you can help me... I just installed a SSD (Samsung EVO 840) and windows 8.1 pro in my pc with M5A99X EVO ( chipset AMD 990X/SB950 ) motherboard. The SSD is installed in sata3 socket using a sata3 wire. The AHCI mode is ON in the bios. I configured the ahci controller and now device administrator looks like this: All works, but the speed of the SDD is very slow (like a HDD). Samsung magician doesn't recognize the sata mode neither the ahci. I tried to install more drivers but the system broke and I need to reinstall windows :( I tried many things from the web, but any works: Modify windows registy Use compatibility mode Modify the amd drivers and install it unsigned Thank you for your time!! EDIT to add a CrystalDiskMark benchmark

  Read the article

• Streaming audio to headless linux box

  - by Ralph

  I have a dual boot (Win 7 + Ubuntu) PC connected via wifi with my music collection on a local HDD. I usually use Rhythmbox on Ubuntu or Winamp on Windows to listen to my music but I'll change if I have to. I also have a Raspberry Pi (low power PC running Debian) in the living room that is usually headless and connected via ethernet. The Raspberry Pi is also connected to my living room speakers via an amp. I would like to be able to stream music from my PC over the network to the linux raspberry pi. What software can I use to do this? Some sort of audio client\server?

  Read the article

• recommendations for a lightweight linux distribution for a test server

  - by Jack

  I'm planning on setting up a test server to experiment with some application servers (tomcat/jboss/...) and with some portals. Now the machine I've set aside for this is lightweight CPU/GPU wise(Atom D510, 4 gigabyte ram, 500 GiB hdd, onboard GPU). But it should suffice for most things, I'm more interested in the stability of JBoss/Tomcat for my purposes than the stability. However I'm having a bit of trouble picking an appropriate distribution size/performance/setup time wise/security wise since it seems I can't sneeze without another distribution popping up. I've been thinking about going for Fedora since I've read that that distribution has been optimized for Atom, but I'm not really familiar with it. My experience with Linux has mostly been limited to Ubuntu and some tinkering with puppylinux. I'm not afraid to get my hands dirty using the command line. I'm not planning on starting a discussion per se, mostly the pros/cons that people have encountered with some distributions

  Read the article

• What is fastest way to backup a disk image over LAN?

  - by David Balažic

  Sometimes I boot sysrescd or a similar live linux on a PC to backup the hardrive over local network to my server. I noticed many times, that the transfer speed is not optimal (slower than HDD and network speed). Any rules of thumb what to do and what to avoid? What I typically do is something like: dd bs=16M if=/dev/sda | nc ... # on client nc ... | dd bs=16M of=/destination/disk/backup1 # on server I also "throw" in lzop (other are way too slow) and sometimes on the fly md5sum calculation (both of uncompressed and compress source). I try to add (m)buffer (or other alternatives) to improve throughput (and get a progress indicator). I noticed that even with enough free CPU, adding commands to the pipeline slows things down. Typically the destination is on a NTFS volume (accessed via ntfs-3g, with the _big_writes_ option).

  Read the article

• New power supply and now HDDs are not recognized

  - by Michael

  So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

  Read the article

• Late Model 2011 Macbook Pro with SSD appears to be off somehow

  - by chris

  Ok, I just got a SSD for my Macbook Pro Late-2011. The specs from what I read are that the laptop is capable of 6gbps, so I got myself a OZC Agility 240gb 6gbps SSD. Decided to join the club and speed test it with Blackmagic Disk Speed Test.. and the results are equivilent to that of a 3gbps setup. So.. I am wondering overall is there a configuration setting somewhere I can tweak? The original HD was a 500gb HDD the spinning kind. So I'm figuring maybe thats why there may be a setting somewhere hidden I dunno about that I can tweak, just wanna see if anyone else knows if this is the case. edit should also mention did a fresh factory install, nothing carried over from original hd

  Read the article

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• ASUS P5B Plus motherboard - no any drives found - how to restore RAID array?

  - by Moha

  We have a small server machine with an ASUS P5B Plus motherboard and 4 SATA HDDs. The HDDs were configured in a RAID10 array. Up until now, everything worked fine, but now the system doesn't recognize the drives. BIOS is set to RAID, jMicron controller is set to RAID, yet I can't see any of the drives in the BIOS setup, and jMicron BIOS tells me "no any drives found" The HDDs all spin up, I hear no clicking sounds or anything that would suggest HDD error. I did a search on this problem and replaced the SATA cables as suggested, but nothing's changed. What I have in mind is checking the CMOS battery and resetting the BIOS to use IDE mode, but I don't know if it will ruin the RAID system on the HDDs. It is not a critical server and there's only one database running on it (which I have backup of), but I don't want to setup the server from scratch if not necessary. What should I try to restore the RAID array and put the server back to working order?

  Read the article

• How to move an existing Win7 setup to a RAID-1 array?

  - by Matthew Scharley

  Currently I have a the following setup: Drive A/B: Identical HDD's Drive C: 2TB external drive with plenty of space currently. Hardware RAID controller Currently I have Drive A which is my boot drive (Win7), and Drive C which is a data drive, and Drive B which I only recently received and is blank. What is the best way of moving off of Drive A, setting up the hardware RAID and then migrating my data back onto the RAID array? I'm proficient with Linux, but I'm not sure if I can get away with simply using dd here. There is currently enough free space on Drive C to take 5-6 copies of a disk image of Drive A, so space isn't an issue.

  Read the article

• Smart backup software

  - by gisek

  I use a laptop on daily basis. As I have a lot of important data there it would be nice to do backups of some directories every day. Can you recommend a specific application that would take care of it? Maybe there is an app that would instantly commit changes I make in a directory on my laptop to the backup folder? The important thing is that I have some big files (a few GB's) that have some minor changes very often. I'm talking about VirtualBox disk images. It would be nice if the software could handle it smartly. Also notice that I'd like to store it on an external usb HDD, which sometimes isn't plugged in.

  Read the article

• Motherboard: Intel S5520HCR s1366 SSI EEB

  - by Crazy_Bash

  I'm building a storage server for online video streaming. I thought about adding two SSD drive for a OS. other 15*(12 SATA & 3 SSD) drives i want to build with aufs XFS and ethernet 4GB/sec network. But I'm confused a little. S5520HCR board supports 6, SATA/300, RAID: 0, 1, 10, Intel ICH10R. Does it mean i can use SATAIII HDD? I'm planing on buying SEAGATE SV35 Series (3.5, 3??, 64??, SATA III-600). also my Chassis supports up-to 16 sata and the motherboard only 6 what kind of sata controller should i use? What's better in terms of performance 1366 or 2011 socket? My server so far: AIC RSC-3EG-80R-SA1S-2 3U Motherboard: Intel S5520HCR s1366 SSI EEB Kingston DDR3 8192Mb PC3-10600 1333MHz (KVR1333D3N9/8G) Seagate 3000GB 64MB 3.5" 7200rpm SATAIII (ST3000DM001) Kingston 480GB SSD 2.5" SATAIII Intel E1G44HTBLK Intel Xeon E5606 2133MHz/L3-8192Kb/QPI s1366 tray SERVER ACC CARD SAS PCIE 16P HBA 9201-16I LSI00244 SGL LSI

  Read the article

• How to empty the Directory-Name-Lookup-Cache?

  - by mutzel

  I'm having speed problems with a Windows software that is looking up files in several directories on a NTFS formatted HDD. In order to find out why and in which settings the problem is occurring I set up a test scenario at my local PC. But this did not work as well as I expected. After the program did the first scan on all directories any additional scans on the same directories are done way faster than at the first scan. I assume that the directory names and there containing file names were cached by Windows. Is it somehow possible to either disable or empty this cache, if it is even existing?

  Read the article

• The best way to make full system dump on Centos [duplicate]

  - by tester3

  This question already has an answer here: Centos 5 Full backup 1 answer I am on Centos 6.5 with a lot of soft and services installed and working. Also I've got a lot of configs which damaged my brain and I dont want to do it again:) So, can anyone please advice the best way to make a full system dump with all data, so I need only to copy-paste them to new system to get my system ready on the other machine. Or something like that? P.S. Data on my hdd is encrypted, and I'd liked and encrypted dump too. Please help:)

  Read the article

• Dell PowerEdge 2950 III running XenServer with 2 VMs gets sluggish after a week and needs rebooted?

  - by Joshua Rountree

  It has weird hangs and then random CPU spikes that do a ton at once. While remoted into the VMs I get an update all at once then it hangs for another 20 seconds. When it lets it go through I get a CPU spike. Basic server specs for the HW node is: 8 CPUs, 16GB ram 1TB HDD total iPERC6 raid 10 The VMs are barely used but I have them spec'd at VM 1: 4 CPUs, 4GB Ram VM2: 4 CPUs 6GB ram The HW node currently says it's total CPU usage is 11% AND Used Memory is at 63%out of 16GB I'm new to this stuff so I'm not sure. I just recently installed this and set it all up. Please advise if you can!

  Read the article

• Why does Windows 7 x64 work faster than an x86 edition on my PC?

  - by Jasper

  Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

  Read the article

• Should I buy this particular MacMini?

  - by sil3nt

  Hello there, I'm not certain if this is the forum I should post this in but here goes anyway. So, I'm honestly clueless when it comes to mac's and I've never owned one before, in fact I still don't own anything with "i" in front of it (not a pc fan, but just low on cash you see:) and I was wondering if these specs are adequate? it's a MacMini G4 1.42Ghz, 1GB ram, 80Gb HDD, 32mb gfx The reason I'm looking for a mac is to start out in some iphone development, and I want a system that wont hang. would this particular system be suitable?. I just need it to be usable and not lag.

  Read the article

• Truecrypt system partion partially encryted but then drive corrupted and won't boot - decrypting so I can access files to backup?

  - by Dr.Seuss

  So I was attempting to encrypt my (Windows 7) system drive with Truecrypt and it stopped at around 15% and said that there was a segment error and that it could not proceed until it was fixed. So, I restarted the computer and ran HDD Regenerator which subsequently fixed the bad sectors on the drive, but now my system cannot boot. So, I run a number of recovery disks to no avail (Windows repair is unable to fix) and the drive won't mount on a linux version run from a CD because the drive is encrypted. So I tried mounting the drive using Truecrypt under the Linux distribution on the disk and selected "Mount partition using system encryption without pre-boot authentication" so I can decrypt, but I get an error message about it only being possible once the entire system is encrypted. How do I get out of this mess? I need to be able to back up the data that's on that partially encrypted drive so I can reinstall my operating system.

  Read the article

• Compaq Presario V2000 Vista/7 trial virtualization

  - by James Schweninger

  I am currently studying for an A-Plus certification to which was recently added troubleshooting Windows 7 to the exam. You also have to be very familiar with Vista as well. I only have XP on my Compaq Presario V2000, but I wanted to set it up ( I believe I have the minimum requirements for both ) so that I could run trial versions of Vista and 7 virtually.Windows 2000 is also on the exam. Is there an easy legal way to do this? I wouldn't mind partitioning my HDD for the four operating systems either. Thnx if you have any ideas, JLS

  Read the article

• suggest AMD machine for software developement [closed]

  - by superb1

  I need a AMD machine (Processor, Motherboard, Ram, HDD ) for software developement .. I will mainly use microsoft visual studio 2010. Operating system would be windows 7 . Suggest decent machine but i dont want to overspend....i guess the rating system of ecommerce websites may help you to suggest !? I want you to suggest from this list : http://www.flipkart.com/computers/components/processor-20246?ref=bae2643a-2cc8-4710-942f-79e7fbc1b416 plz note basic criteria for vs 2010 is 1.6GHz or faster processor 1 GB (32 Bit) Ram 5400 RPM hard disk DirectX 9 capable video card running at 1024 x 768 or higher-resolution

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >