Search Results

Search found 10402 results on 417 pages for 'pc maintenance'.

Page 130/417 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

  • "The program is too big to fit in memory" problem?!!

    - by user47038
    Please help me!!! This is most amazing error that i have ever had, we write 100 CD, in these CDs we got one setup.exe file that autorun. in some of these CDs when I explore the cd the setup.exe file become the command prompt file and give me above error. and when I reset the system and put it in another pc it`s ok. if I reset the first pc the autorun.exe run. so I change it different computer, randomly get this problem. I am sure about the virus, because I checked on different pcs and with fully update definition so someone tell me what happen?

    Read the article

  • What does an ACPI BIOS configure during boot?

    - by RJSmith92
    When a PC boots with an ACPI BIOS, what does it exactly do? I understand that the point of ACPI is to allow the OS to control hardware resources and power management but before the OS is loaded does ACPI configure just the devices needed to boot and then let the OS configure the rest? If the OS wants to re-asign hardware resources does it store this information in the ACPI tables so that the next time the system is booted it assigns them how the OS wants? The ACPI driver asks the PCI bus driver (Pci.sys) to enumerate devices on it's bus once the OS is loaded, how are these devices configured whilst the PC is booting when it doesn't have other bus drivers? Any help with any of the above questions would be greatly appreciated. Thanks.

    Read the article

  • Can I create a virtual network interface to connect to a real network device?

    - by michelemarcon
    I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

    Read the article

  • ShoreTel 230 phone calls from website

    - by Michael Irey
    Our company uses these fancy ShoreTel 230 phones. We make many phone calls from our custom built web based contact management system. It would be nice if our employees could click on a phone number from a webpage and have it automatically start dialing the number. (Similar to how iPhone handles this) Anyone every deploy something like this? I would imagine it would require some kind of background running ShoreTel process to accommodate this. 90% of our employees use PC (Windows 7) 10% use OS X Even a PC only solution would be great. Is this even possible and if so, where should one begin? Thanks!

    Read the article

  • win2003 server problem

    - by Tavo
    I used to have a server with win2000 OS. Yesteday I updated it to win2003 server R2 service pack 2. My problem now is that in a particular moment nobody can access the server. All of the shared resource of the server are unavailable. The only solution is to restart the server although the server is running fine. I don't think that is a connection problem of the LAN, because with the win2000 this problem didn't happend. The PC is connected to the same switch and the PC have the same exact hardware.

    Read the article

  • Remote Desktop to a user while still logged on

    - by Jonathan
    Is there a way to connect remotely to another user while there is a user still on the same PC. So one PC with users and both of them logged in at the same time, one locally and one remotely? Sorry i didn't explain my question very well, I don't mean 2 users viewing the same screen. I mean 2 user accounts. Say UserA is sitting at the desk on his account. and then UserB is on his account account but it remotely connecting to it. So they both have different desktops in front on their respective screens.

    Read the article

  • Very slow accessing printer shared from Windows Machine

    - by Tarski
    How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

    Read the article

  • My WD Caviar Green SATA HDD cannot be detected

    - by obhasha
    I have a WD 2TB Caviar Green SATA HDD. I used it as an external hard drive formatted to FAT32. The main purpose was to store my PS3 games. It worked fine and all of a sudden my PS3 stopped detecting it. I tried connecting it to my pc and the same result. I took it off from the enclosure and plugged it directly to my PC and used the BIOS setup. The BIOS setup detects my HDD but it says it's 0.0MB!!! I also tried the WD Data Lifeguard Diagnostic tool and it wasn't much of use because the drive is not picking up by windows at all. Is my HDD dead? Is it beyond repair?

    Read the article

  • What are the most likely bottlenecks determining the performance of CamStudio screen recording?

    - by Steve314
    When doing screen recording, I can get a frame rate of maybe 15 frames per second for the full screen on my 1080p monitor using the XVID codec. I can increase the speed a bit by recording a region, changing screen modes, and tweaking other settings, but I'm curious what hardware upgrades might give me the biggest bang for my buck. My PC is budget, but modern... Athlon 2 X4 645 (3.1GHz, quad core, limited cache) processor. 4GB single channel DDR3 1066 RAM. ASRock motherboard with NVidia GeForce 7025/nForce 630a Chipset. ATI Radeon HD 5450 graphics card - 512MB on board, not configured to steal system RAM. I dual-boot Windows XP and Windows 7. For the moment, XP is my bigger performance concern as it's still my getting-things-done O/S as opposed to my browser-host O/S. My goal is to make a few programming-related tutorials. For a lot of that I don't need screen recording - I can make up some slides, record audio with the PC switched off, yada yada. When I do need screen recording, I'll mostly be recording Notepad++, Visual Studio or a command prompt. Occasionally, I may be recording some kind of graphics or diagram program and using my pre-Bamboo cheap Wacom tablet - I have the CS2 versions of Photoshop and Illustrator, but I'd much more likely be using Microsoft Paint. Basically, what I'll be recording won't be making huge demands on the machine - but recording a fair number of pixels (720p preferred) will be useful. What's particularly wierd - not so long ago I still had a five-year-old Pentium 4 based PC. And (with the same 1080p monitor) it could record at not far from the same frame rate. So clearly the performance issues are more subtle than just throw-money-at-it. My first guess would be that the main bottleneck is the bandwidth for transferring data to/from the graphics card. Is that likely to be correct? In support of that, see this [Radeon HD 5450 review][1] - the memory bandwidth is only 12.8 GB/s. If you can't get data out of graphics memory quickly, you can't transfer it back to the system memory quickly. Apparently, that's slower than some top-end cards in 2002.

    Read the article

  • How to prevent Windows from doing this

    - by Murtaza
    I am using Windows 7 Professional 64bit. This is my webcam. It is first time using this webcam in my pc. It's name is A4tech - PK-331F. When I plugged that webcam, windows start installing drivers automatically but unfortunately it installed wrong drivers. The drivers Windows 7 installed are Vimicro USB 2.0 PC Camera (Venus) and these drivers aren't related to this webcam. Now I did some modifications to windows so it isn't installing drivers automatically but whenever I plug that webcam but same name of drivers and doesn't install it. I think because of it, I can't install it's original drivers. I don't want Windows recognize this webcam with this name. How can I prevent Windows from doing this?.

    Read the article

  • What's a fast way to copy a lot of files from an internal hard-drive to external (USB) storage?

    - by jonathanconway
    I have a large amount of data - about 500 GB - on the internal hard drive of a desktop PC. This includes music, videos, PDFs... you name it. I want to copy everything to an external USB hard drive (1.5 tb capacity). The desktop PC runs Ubuntu. To being with, I simply plugged in and mounted the hard drive and dragged the top-level folder onto the drive. It's started copying, but it seems to be proceeding very slowly. About 10 minutes later and it's only done about 500 MB. I'm sure this is slower than what I could achieve with less total data. So I'm wondering if there's a quicker way of doing this. Would it be better to copy it in portions of 500MB or so, rather than all at once?

    Read the article

  • System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

    - by MGOwen
    Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

    Read the article

  • Separating my VPN connection from my internet access

    - by Christi
    Background: Home PC is Windows XP and using Cisco VPN client; home internet connection is fast (20MB) office VPN router is Cisco RV110W; work internet connection is slow (1.5MB) With VPN connected, my home PC internet surfing is very slow. I looked this up in Google and found talk about splitting, tunneling, routing tables, etc., but I'm not sure what/how to do it. Basically, I would like a persistent VPN connection with the office resources, and at the same time, utilize my home high speed internet connection to access the internet. Can someone help me the steps as how-to?

    Read the article

  • How can I resolve this error when using net start / stop: "The service name is invalid" ?

    - by JosephStyons
    We have a server that hosts a service (I'll call it "tomato"). Up until now, a client pc has been able to start and stop this service. They just double-click a batch file, and inside that batch file is the command net stop tomato or net start tomato They recently got a new physical computer, and now those same commands fail with the error: C:\>net stop tomato The service name is invalid. More help is available by typing NET HELPMSG 2185. What do I need to do to let the client pc start and stop this service remotely? Edit: I mis-remembered the original commands. They were not using "net start" and "net stop" remotely. They were using sc \\server_name start tomato and sc \\server_name stop tomato And those commands to indeed still work.

    Read the article

  • Does Windows notice when a VM is moved around?

    - by Martin
    I'm thinking of migrating a Desktop machine (Windows XP) to a VM solution (VirtualBox or MS Virtual PC). The reason is that I need a new hardware anyways and I don't want to (cannot properly) reinstall all the "business" apps on there. So my plan goes as follows: I'll pull an image of the machine and restore it to a Virtual Machine using Acronis Universal Restore or some other tool that can restore to dissimilar hardware. (The process is largely irrelevant for this question I think.) Once I have this virtual machine properly running I'll move it to a new PC. So the question now is. Are there any caveats wrt. to Windows (XP?) being installed in a VM and the VM machine being moved around on different host computers? Can anything break in the OS inside the VM? Will there be troubles wrt. to Windows activation?

    Read the article

  • Lync client configured as room

    - by captainmish
    We have a few usb cameras in meeting rooms that people can plug their laptops into, which works ok, but we're looking for better... Probably a long shot, but does anyone know of a way to have something like a "common area" client, where a PC connected to a webcam and speakers/mic can become a bookable resource, dragged in to conversations and automatically show video? A workflow I imagine: User books a room with "special" lync client as attendee Meeting time comes, they go to the room and fire up lync on their pc "special" lync client automatically (or is dragged in) joins and starts video, local attendees use audio and video from the special client Any tips welcome!

    Read the article

  • Has anyone figured out how to use same username with different passwords (Windows)

    - by Coder
    Tried Googling, tried net use, and anything I could, with no results. I have a PC with users, and I have a network server with shared folders. For some users the usernames of the share and local account match, but the passwords are different (a good security practice). Unfortunately, Windows doesn't want to remap the drives on login, and asks for credentials when I try to connect. If I enter the password, the connection succeeds, but it still fails on next login, even if I have checked the "remember" checkbox. On PC: usera@machinea pass1 On NAS: usera@nas pass2 net use z: \\nasip\usera /user:nasip\usera pass2 /persistent:yes Credential store seems to have the user credentials stored... But the mapping fails all the time.

    Read the article

  • How do I add permissions via command line for "everyone" on external HDD

    - by acidzombie24
    I have an external HDD and I kind of messed up the file permissions but when fixing it I thought it is ok bc with my username I can access the files perfectly fine. Now that I use this with two PC (actually ATM I don't have access to my other PC) I can't access these files. The problem is this directory has hundreds of folders with no permission for "everyone". I would like to give it the default permissions including have all access for the user "everyone". How do I do that via command line for these hundreds of folders?

    Read the article

  • nginx + IIS + GET

    - by Eralde
    I have nginx on pc "A" & IIS with ASP.NET on pc "B". nginx is configured like this: ... location ~ ((Web|Script)Resource.*)$ { proxy_pass "B"/$1; proxy_redirect off; proxy_set_header REMOTE_ADDR $remote_addr; proxy_set_header REQUEST_URI $request_uri; proxy_set_header HTTP_REFERER $http_referer; #proxy_set_header REQUEST_URI $request_uri; proxy_set_header QUERY_STRING $query_string; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; }... but requests to "B"/WebScript?a=b&c=d aren't able to deliver GET data (a=b&c=d) to IIS part. Could anyone help with this?

    Read the article

  • Access or import an Outlook 2003 .pst file without Outlook

    - by Nobler
    I have a 450 meg .pst file (MS Outlook 2003 backup file) saved from a PC before it crashed. I would like to break it up into its components i.e. Save attachments to folders on my PC Paste text-emails into a word processor, etc. But I don't want to buy MS Office Professional 2003 or later solely for importing the .pst into MS Outlook 2003+. Outlook Express cannot import .pst files, only Outlook “proper” can. Is there some free email client out there, e.g. Thunderbird, that can import .pst files? Or is there some other way to access the 450meg file?

    Read the article

  • How can I know which key of Windows Vista corresponds to the upgrade key of Windows 7

    - by js_
    I have two Dell PCs. And each PC has a Windows Vista disc and a Windows 7 upgrade disc which Dell gave me for free. And each disc has a product key. There are 4 product keys in total. I'm going to sell one of the Dell PCs. But unfortunately I don't know which product key of Windows 7 corresponds to which product key of Windows Vista. If I sell the PC with wrong combination of a Windows Vista and a Windows 7, error will occur and I will get in trouble. How can I know which Windows 7 corresponds to which Windows Vista?

    Read the article

  • Shuttle FB51 mobo does not boot with external USB drive attached [closed]

    - by user127236
    I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

    Read the article

  • Get Remote Processes on Windows 2003 with cpu percentage

    - by Brettski
    I have a production server with it's cpu's running excessively high. Except in critical circumstances nobody is allowed to logon to servers during non maintenance times. I am looking for an application I can use to look at the processes on the remote server which include CPU % usage. An application like top. Windows native tasklist.exe doesn't show percentage, nor does sysinternals pslist.exe. Suggestions?

    Read the article

  • Windows 7 Pro - "domain" like login screen appeared

    - by Adrian
    I'm setting up a new PC with the Windows 7 Pro. After some actions (software installing, config changes, applying updates ), my login screen looks like the PC is connected to the domain: I have checked the settings and everywhere the "workgroup" is checked. I have been googling for three hours trying some solutions (Control UserPasswords2, regedit and the ".DEFAULT" key) but nothing works. I cannot see the user icons - only the login screen as above. I cannot also change the account icon. Has anybody seen such an issue?

    Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >