Search Results

Search found 9410 results on 377 pages for 'simulator difference'.

Page 130/377 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• Why is my model's scale changing after rotating it?

  - by justnS

  I have just started a simple flight simulator and have implemented Roll and pitch. In the beginning, testing went very well; however, after about 15-20 seconds of constantly moving the thumbsticks in a random or circular motion, my model's scale begins to grow. At first I thought the model was moving closer to the camera, but i set break points when it was happening and can confirm the translation of my orientation matrix remains 0,0,0. Is this a result of Gimbal Lock? Does anyone see an obvious error in my code below? public override void Draw( Matrix view, Matrix projection ) { Matrix[] transforms = new Matrix[Model.Bones.Count]; Model.CopyAbsoluteBoneTransformsTo( transforms ); Matrix translateMatrix = Matrix.Identity * Matrix.CreateFromAxisAngle( _orientation.Right, MathHelper.ToRadians( pitch ) ) * Matrix.CreateFromAxisAngle( _orientation.Down, MathHelper.ToRadians( roll ) ); _orientation *= translateMatrix; foreach ( ModelMesh mesh in Model.Meshes ) { foreach ( BasicEffect effect in mesh.Effects ) { effect.World = _orientation * transforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } mesh.Draw(); } } public void Update( GamePadState gpState ) { roll = 5 * gpState.ThumbSticks.Left.X; pitch = 5 * gpState.ThumbSticks.Left.Y; }

  Read the article

• JavaScript 3D space ship rotation

  - by user36202

  I am working with a fairly low-level JavaScript 3D API (not Three.js) which uses euler angles for rotation. In most cases, euler angles work quite well for doing things like aligning buildings, operating a hovercraft, or looking around in the first-person. However, in space there is no up or down. I want to control the ship's roll, pitch, and yaw. To do that, some people would use a local coordinate system or a permenant matrix or quaternion or whatever to represent the ship's angle. However, since I am not most people and am using a library that deals exclusively in euler angles, I will be using relative angles to represent how to rotate the ship in space and getting the resulting non-relative euler angles. For you math nerds, that means I need to convert 3 euler angles (with Y being the vertical axis, X representing the pitch, and Z representing a roll which is unaffected by the other angles, left-handed system) into a 3x3 orientation matrix, do something fancy with the matrix, and convert it back into the 3 euler angles. Euler to matrix to euler. Somebody has posted something similar to this on SO (http://stackoverflow.com/questions/1217775/rotating-a-spaceship-model-for-a-space-simulator-game) but he ended up just working with a matrix. This will not do for me. Also, I am using JavaScript, not C++. What I want essentially are the functions do_roll, do_pitch, and do_yaw which only take in and put out euler angles. Many thanks.

  Read the article

• Is there a LOGO interpreter that actually has a turtle?

  - by Tim Post

  This is not a repeat of the now infamous "How do I move the turtle in LOGO?" Recently, I had the following conversation with my five year old daughter: Daughter: Daddy, do you write programs? Me: Yes! Daughter: Daddy, what's a program? Me: A program is a set of instructions that a computer follows. Daughter: Daddy, can I write a program too? Me: Sure! This got me scrambling to think of a very basic language that a five year old could get some satisfaction from mastering rather quickly. I'm ashamed to admit that the first thing that came to mind was this: 10 INPUT "Tell me a secret" A$ 20 PRINT "Wow really? :" A$ 30 GOTO 10 That isn't going to hold a five year old's attention for very long and it requires too much of a lecture. However, moving a turtle around and drawing neat pictures might just work. Sadly, my search for a LOGO interpreter yielded noting but ad ridden sites, flight simulators and a whole bunch of other stuff that I really don't want. I'm hoping to find a cross platform (Java / Python) LOGO interpreter (dare I call it simulator?) with the following features: Can save / replay commands (stored programs) Has an actual turtle Sound effects are a plus Have you stumbled across something like this, if so, can you provide a link? I hate to ask a 'shopping' sort of question, but it seemed much better than "Is LOGO appropriate for a five year old?"

  Read the article

• Registering in the iOS developer program as a minor

  - by maxluzuriaga

  Hi there. Recently I started learning to develop Apps for iOS, and while the simulator is fine for starting out, I've gotten to the point that I really should be testing the Apps I write on an actual device. As I'm sure you are well aware, to do this you must be a member of the $99/year iOS developer program, which also allows you to publish on the App Store. I'm more than happy to pay the fee, but my problem is that I'm still a minor, and to join the developer program you must be over 18 in the U.S. (I'm not sure how it works in other countries). I've talked to a few others that were in a similar position, but their responses have been varied. From what I've gathered, the best course of action is to register in the name of one of my parents. My problem with this is that if I were to ever publish an App on the store, it would be ideal to have my name as the seller instead of my Dad's. It wouldn't be the end of the world if this happened, but as I said, this wouldn't be ideal. Now I turn to you; is this a good plan? Have any of you been in this position or known somebody who has? Any other tips would be greatly appreciated. Thanks!

  Read the article

• Coordinate and positioning problem on iOS with cocos2d-x

  - by Vexille

  I'm using cocos2d-x alongside with Marmalade and running some tests and tutorials before starting an actual project with them. So far things are working reasonably well on the windows simulator, Android and even on Blackberry's Playbook, but on iOS devices (iPhone and iPad) the positioning seems to be off. To make things clearer, I put together a scene that just draws an image in the middle of the screen. It worked as expected on everything else, but this is the result I got on an iPhone: To get the coordinates for the center of the screen I'm using the VisibleRect class from the TestCpp sample. It just uses sharedOpenGLView to get the visible size and visible origin, and calculate the center from that. CCSprite* test = CCSprite::create("Ball.png", CCRectMake(0, 0, 80, 80) ); test->setPosition( ccp(VisibleRect::center().x, VisibleRect::center().y) ); this->addChild(test); Also I have a noBorder policy set on AppDelegate: CCEGLView::sharedOpenGLView()->setDesignResolutionSize(designSize.width, designSize.height, kResolutionNoBorder); One funny thing is that I tried to deploy the TestCpp sample project to some iOS devices and it worked reasonably well on the iPhone, but on the iPad the application was only being drawn on a small portion of the screen - just like what happened on the iPhone when I tried using the ShowAll policy.

  Read the article

• Whole continent simulation [on hold]

  - by user2309021

  Let's suppose I am planning to create a simulation of an entire continent at some point in the past (let's say, around 0 A.D). Is it feasible to spawn a hundred million actors that interact with each other and their environments? Having them reproduce, extract resources, etc? The fact is that I actually want to create a simulation that allows me to zoom in from a view of the entire continent up to a single village, and interact with it. (Think as if you could keep zooming in the campaign map of any Total War game and the transition to the battle map was seamless, not a change of the "game mode"). By the way, I have never made a game in my entire life (I have programmed normal desktop applications, though), so I am really having trouble wrapping my head around how to implement such a thing. Even while thinking about how to implement a simple population simulator, without a graphical interface, I think that the O(n) complexity of traversing an array and telling all people to get one year older each time the program ticks is kind of stupid. Any kind help would be greatly appreciated :) EDIT: After being put on hold, I shall specify a question. How would you implement a simulation of all basic human dynamics (reproduction, resource consumption) in an entire continent (with millions of people)?

  Read the article

• How to handle the different frame rate on different devices?

  - by Fenwick

  I am not quite sure how frame per second works on a web page. I have a Canvas game that involves in moving an image from point A to B, and measuring the time elapsed. The code can be as simple as: var timeStamp = Date.now(); function update(){ obj.y += obj.speed; text = "Time: "+ (Date.now() - timeStamp) + "ms"; } The function update() is called every frame. The problem is that the time elapsed is different from device to device. It is pretty short on my PC, but get longer on my iPad, and is much longer on my cell phone. I thought it is because the FPS is smaller on mobile devices, so instead of calling update() every frame, I call it every 1ms by using a setInterval. But this does not solve the problem. In my understanding, the function for setInterval is invoked based on the increment in system time, other than frame rate, so it should fix the problem. Am I missing anything here? If the setInterval function is called based on FPS, is there any way to get around with the FPS difference across devices? On a side note, I have sort of a "water simulator" on the same canvas. It involves in redrawing about 60 objects which can be 600x600 pixels for every frame, so it could be a frame rate killer. I am using Phaser.js but not really using much of its functionalities, if that helps.

  Read the article

• Hobbyist transitioning to earn money on paid work?

  - by Chelonian

  I got into hobbyist Python programming some years ago on a whim, having never programmed before other than BASIC way back when, and little by little have cobbled together a, in my opinion, nice little desktop application that I might try to get out there in some fashion someday. It's roughly 15,000 logical lines of code, and includes use of Python, wxPython, SQLite, and a number of other libraries, works on Win and Linux (maybe Mac, untested) and I've gotten some good feedback about the application's virtues from non-programmer friends. I've also done a small application for data collection for animal behavior experiments, and an ad hoc tool to help generate a web page...and I've authored some tutorials. I consider my Python skills to be appreciably limited, my SQL skills to be very limited, but I'm not totally out to sea, either (e.g. I did FizzBuzz in a few minutes, did a "Monty Hall Dilemma" simulator in some minutes, etc.). I also put a strong premium on quality user experience; that is, the look and feel matters much to me and the software looks quite good, I feel. I know no other programming languages yet. I also know the basics of HTML/CSS (not considering them programming languages) and have created an artist's web page (that was described by a friend as "incredibly slick"...it's really not, though), and have a scientific background. I'm curious: Aside from directly selling my software, what's roughly possible--if anything--in terms of earning either side money on gigs, or actually getting hired at some level in the software industry, for someone with this general skill set?

  Read the article

• How can I test linkable/executable files that require re-hosting or retargeting?

  - by hagubear

  Due to data protection, I cannot discuss fine details of the work itself so apologies PROBLEM CASE Sometimes my software projects require merging/integration with third party (customer or other suppliers) software. these software are often in linkable executables or object code (requires that my source code is retargeted and linked with it). When I get the executables or object code, I cannot validate its operation fully without integrating it with my system. My initial idea is that executables are not meant to be unit tested, they are meant to be linkable with other system, but what is the guarantee that post-linkage and integration behaviour will be okay? There is also no sufficient documentation available (from the customer) to indicate how to go about integrating the executables or object files. I know this is philosophical question, but apparently not enough research could be found at this moment to conclude to a solution. I was hoping that people could help me go to the right direction by suggesting approaches. To start, I have found out that Avionics OEM software is often rehosted and retargeted by third parties e.g. simulator makers. I wonder how they test them. Surely, the source code will not be supplied due to IPR rgulations. UPDATE I have received reasonable and very useful suggestions regarding this area. My current struggle has shifted into testing 3rd party OBJECT code that needs to be linked with my own source code (retargeted) on my host machine. How can I even test object code? Surely, I need to link them first to even think about doing anything. Is it the post-link behaviour that needs to be determined and scripted (using perl,Tcl, etc.) so that inputs and outputs could be verified? No clue!! :( thanks,

  Read the article

• CLR Profiler Allocated Bytes and XNA ContentManager

  - by Vackup

  I've been fighting with XNA ContentManager and memory allocations for some weeks because I'm trying to port my game from XNA (Windows) to ExEn / Monotouch (iphone). The problem is that after playing a few levels, my game exits unexpectedly on a real iPhone device (not simulator). Profiling memory usage on Windows with CLRProfile, I found some useful stuff but I also found something I dont understand. If I use 2 ContentManagers (1 for shared assets and 1 for level assets), when profiling, "Allocated Bytes" grows and grows after level through level but Memory consumption measured by Windows Task Manager stays constant (down when I unload the content manager and up again when I load content). Obviously, I contentManager.Unload() when level ends. After a few levels my game exits unexpectedly on an iPhone device. If I use 1 content manager, "CRLProfiler Allocated Bytes" stays constant on Windows and on the iPhone; I can play the game normally and it doesnt exit unexpectedly. I use the same assets level through level. It seems like in ios (iPhone) when loading and unloading the same assets, it allocates memory and consumes all device memory, so the ios kill it. Can anybody explain me how this really works? I've read quite a bit, but I still don't understand what's going on.

  Read the article

• Testing my model for hybrid scheduling in Embedded Systems

  - by markusian

  I am working on a project for school, where I have to analyze the performances of a few fixed-priority servers algorithms (polling server, deferrable server, priority exchange) using a simulator in the case of hybrid scheduling, where we have both hard periodic tasks and soft aperiodic tasks. In my model I consider that: the hard tasks have a period equal to their deadline, with a known worst case execution time (wcet). The actual execution time could be smaller than the wcet. the soft tasks have a known wcet and random interarrival times. The actual execution time could be smaller than the wcet. In order to test those algorithms I need realistic case studies. For this reason I'm digging in the scientific literature but I am facing different problems: Sometimes I find a list of hard tasks with wcet, but it is not specified how the soft tasks parameters are found. Given the wcet of a task, how can I model its actual execution time? This means, what random distribution should I use considering the wcet? How can I model the random interarrival times of soft aperiodic tasks?

  Read the article

• Surface Review from Canadian Guy Who Didn&rsquo;t Go To Build

  - by D'Arcy Lussier

  I didn’t go to Build last week, opted to stay home and go trick-or-treating with my daughters instead. I had many friends that did go however, and I was able to catch up with James Chambers last night to hear about the conference and play with his Surface RT and Nokia 920 WP8 devices. I’ve been using Windows 8 for a while now, so I’m not going to comment on OS features – lots of posts out there on that already. Let me instead comment on the hardware itself. Size and Weight The size of the tablet was awesome. The Windows 8 tablet I’m using to reference this against is the one from Build 2011 (Samsung model) we received as well as my iPad. The Surface RT was taller and slightly heavier than the iPad, but smaller and lighter than the Samsung Win 8 tablet. I still don’t prefer the default wide-screen format, but the Surface RT is much more usable even when holding it by the long edge than the Samsung. Build Quality No issues with the build quality, it seemed very solid. But…y’know, people have been going on about how the Surface RT materials are so much better than the plastic feeling models Samsung and others put out. I didn’t really notice *that* much difference in that regard with the Surface RT. Interesting feature I didn’t expect – the Windows button on the device is touch-sensitive, not a mechanical one. I didn’t try video or anything, so I can’t comment on the media experience. The kickstand is a great feature, and the way the Surface RT connects to the combo case/keyboard touchcover is very slick while being incredibly simple. What About That Touch Cover Keyboard? So first, kudos to Microsoft on the touch cover! This thing was insanely responsive (including the trackpad) and really delivered on the thinness I was expecting. With that said, and remember this is with very limited use, I would probably go with the Type Cover instead of the Touch Cover. The difference is buttons. The Touch Cover doesn’t actually have “buttons” on the keyboard – hence why its a “touch” cover. You tap on a key to type it. James tells me after a while you get used to it and you can type very fast. For me, I just prefer the tactile feeling of a button being pressed/depressed. But still – typing on the touch case worked very well. Would I Buy One? So after playing with it, did I cry out in envy and rage that I wasn’t able to get one of these machines? Did I curse my decision to collect Halloween candy with my kids instead of being at Build getting hardware? Well – no. Even with the keyboard, the Surface RT is not a business laptop replacement device. While Office does come included, you can’t install any other applications outside of Windows Store Apps. This might be limiting depending on what other applications you need to have available on your computer. Surface RT is a great personal computing device, as long as you’re not already invested in a competing ecosystem. I’ve heard people make statements that they’re going to replace all the iPads in their homes with Surface tablets. In my home, that’s not feasible – my wife and daughters have amassed quite a collection of games via iTunes. We also buy all our music via iTunes as well, so even with the XBox streaming music service now available we’re still tied quite tightly to iTunes. So who is the Surface RT for? In my mind, if you’re looking for a solid, compact device that provides basic business functionality (read: email) or if you have someone that needs a very simple to use computer for email, web browsing, etc., then Surface RT is a great option. For me, I’m waiting on the Samsung Ativ Smart PC Pro and am curious to see what changes the Surface Pro will come with.

  Read the article

• cannot make ubuntu 64-bit v12.04 install work

  - by honestann

  I decided it was time to update my ubuntu (single boot) computer from 64-bit v10.04 to 64-bit v12.04. Unfortunately, for some reason (or reasons) I just can't make it work. Note that I am attempting a fresh install of 64-bit v12.04 onto a new 3TB hard disk, not an upgrade of the 1TB hard disk that contains my working 64-bit v10.04 installation. To perform the attempted install of v12.04 I unplug the SATA cable from the 1TB drive and plug it into the 3TB drive (to avoid risking damage to my working v10.04 installation). I downloaded the ubuntu 64-bit v12.04 install DVD ISO file (~1.6 GB) from the ubuntu releases webpage and burned it onto a DVD. I have downloaded the DVD ISO file 3 times and burned 3 of these installation DVDs (twice with v10.04 and once with my winxp64 system), but none of them work. I run the "check disk" on the DVDs at the beginning of the installation process to assure the DVD is valid. When installation completes and the system boots the 3TB drive, it reports "unknown filesystem". After installation on the 250GB drives, the system boots up fine. During every install I plug the same SATA cable (sda) into only one disk drive (the 3TB or one of the 250GB drives) and leave the other disk drives unconnected (for simplicity). It is my understanding that 64-bit ubuntu (and 64-bit linux in general) has no problem with 3TB disk drives. In the BIOS I have tried having EFI set to "enabled" and "auto" with no apparent difference (no success). I never bothered setting the BIOS to "non-EFI". I have tried partitioning the drive in a few ways to see if that makes a difference, but so far it has not mattered. Typically I manually create partitions something like this: 8GB /boot ext4 8GB swap 3TB / ext4 But I've also tried the following, just in case it matters: 8GB boot efi 8GB swap 8GB /boot ext4 3TB / ext4 Note: In the partition dialog I specify bootup on the same drive I am partitioning and installing ubuntu v12.04 onto. It is a VERY DANGEROUS FACT that the default for this always comes up with the wrong drive (some other drive, generally the external drive). Unless I'm stupid or misunderstanding something, this is very wrong and very dangerous default behavior. Note: If I connect the SATA cable to the 1TB drive that has been my ubuntu 64-bit v10.04 system drive for the past 2 years, it boots up and runs fine. I guess there must be a log file somewhere, and maybe it gives some hints as to what the problem is. I should be able to boot off the 1TB drive with the 3TB drive connected as a secondary (non-boot) drive and get the log file, assuming there is one and someone tells me the name (and where to find it if the name is very generic). After installation on the 3TB drive completes and the system reboots, the following prints out on a black screen: Loading Operating System ... Boot from CD/DVD : Boot from CD/DVD : error: unknown filesystem grub rescue> Note: I have two DVD burners in the system, hence the duplicate line above. Note: I install and boot 64-bit ubuntu v12.04 on both of my 250GB in this same system, but still cannot make the 3TB drive boot. Sigh. Any ideas? ========== motherboard == gigabyte 990FXA-UD7 CPU == AMD FX-8150 8-core bulldozer @ 3.6 GHz RAM == 8GB of DDR3 in 2 sticks (matched pair) HDD == seagate 3TB SATA3 @ 7200 rpm (new install 64-bit v12.04 FAILS) HDD == seagate 1TB SATA3 @ 7200 rpm (64-bit v10.04 WORKS for two years) HDD == seagate 250GB SATA2 @ 7200 rpm (new install 64-bit v12.04 WORKS) HDD == seagate 250GB SATA2 @ 7200 rpm (new install 64-bit v12.04 WORKS) GPU == nvidia GTX-285 ??? == no overclocking or other funky business USB == external seagate 2TB HDD for making backups DVD == one bluray burner (SATA) DVD == one DVD burner (SATA) 64-bit ubuntu v10.04 has booted and run fine on the seagate 1TB drive for 2 years.

  Read the article

• ASP.NET Server-side comments

  - by nmarun

  I believe a good number of you know about Server-side commenting. This blog is just like a revival to refresh your memories. When you write comments in your .aspx/.ascx files, people usually write them as: 1: <!-- This is a comment. --> To show that it actually makes a difference for using the server-side commenting technique, I’ve started a web application project and my default.aspx page looks like this: 1: <%@ Page Title="Home Page" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="ServerSideComment._Default" %> 2: <asp:Content ID="HeaderContent" runat="server" ContentPlaceHolderID="HeadContent"> 3: </asp:Content> 4: <asp:Content ID="BodyContent" runat="server" ContentPlaceHolderID="MainContent"> 5: <h2> 6: <!-- This is a comment --> 7: Welcome to ASP.NET! 8: </h2> 9: <p> 10: To learn more about ASP.NET visit <a href="http://www.asp.net" title="ASP.NET Website">www.asp.net</a>. 11: </p> 12: <p> 13: You can also find <a href="http://go.microsoft.com/fwlink/?LinkID=152368&amp;clcid=0x409" 14: title="MSDN ASP.NET Docs">documentation on ASP.NET at MSDN</a>. 15: </p> 16: </asp:Content> See the comment in line 6 and when I run the app, I can do a view source on the browser which shows up as: 1: <h2> 2: <!-- This is a comment --> 3: Welcome to ASP.NET! 4: </h2> Using Fiddler shows the page size as: Let’s change the comment style and use server-side commenting technique. 1: <h2> 2: <%-- This is a comment --%> 3: Welcome to ASP.NET! 4: </h2> Upon rendering, the view source looks like: 1: <h2> 2: 3: Welcome to ASP.NET! 4: </h2> Fiddler now shows the page size as: The difference is that client-side comments are ignored by the browser, but they are still sent down the pipe. With server-side comments, the compiler ignores everything inside this block. Visual Studio’s Text Editor toolbar also puts comments as server-side ones. If you want to give it a shot, go to your design page and press Ctrl+K, Ctrl+C on some selected text and you’ll see it commented in the server-side commenting style.

  Read the article

• Friday Fun: The Search For Wondla

  - by Asian Angel

  The best day of the week is finally here again, so it is time to have some fun while waiting to go home for the weekend. The game we have for you today takes you far into humanity’s future where you journey with Eva Nine in her quest to find other humans. Note: Today’s game comes with a double bonus! First, there is a sequel game that you can move on to once you have completed the first one. Second, there are three wallpapers available in multiple sizes for those who enjoy the characters and artwork presented in the game (see below). The Search For Wondla The object of the game is to find the differences between two similar looking images based on artwork from The Search For Wondla by Tony DiTerlizzi. Are you ready to join Eva Nine in her quest to find other humans in the future? Note: There is a version available for those who would like to play The Search For Wondla on their iPads! The first game has 28 levels of difference finding goodness for you to work through. Each level will list the minimum number of differences that you need to find to progress to the next level. If you need a hint along the way just click on the Shake or Reveal options at the bottom of the game play window. Get a level completed quickly enough and you get bonus points! There will also be differences in the images for individual levels each time you play the game, so have fun! Note: The second game has 12 levels to complete. To give you a good feel for the game we have covered the first six levels here and provided seven clues for each level (you are only required to find a minimum of five). Eva Nine viewing the holographic outdoor projections in the main hub of her living quarters… Eva Nine is in a grumpy mood as Muthr visits her at bedtime… Eva Nine in her secret hideaway visiting old “childhood friends” as she contemplates her recent survival test failure. Eva Nine viewing the entire set of floor plans for the underground sanctuary where she was born and has been growing up. Eva Nine’s escape to the surface as the underground sanctuary is attacked by the bounty hunter creature Besteel. Eva Nine on the surface for the first time in her young life. Will she be successful in her quest? There is only one way to find out! Play The Search For Wondla Part 1 Play The Search For Wondla Part 2 Bonus Content If you have enjoyed this game you can learn more about the book and download the three wallpapers shown here by visiting the link below! Note: The wallpapers come in the following sizes: 1024*768, 1280*800, 1280*1024, 1440*900, iPhone, iPhone4, and iPad (click on the Extras link at the bottom of the page). Visit the Search For Wondla Homepage Do you enjoy playing difference finding games? Then you will definitely want to have a look at another wonderful game that we have covered here: Friday Fun: Isis Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

  Read the article

• &lsquo;Publish&hellip;&rsquo; Resulting in Directory With No Files

  - by ToStringTheory

  I was pulling my hair out with this one…  Which isn’t good considering I have so little of it left!  I had just upgraded to the Windows Azure 1.7 SDK the day before with no problems, and used the upgraded ‘Publish…’ dialog to successfully publish a website to my hard disk for hosting on an internal development server.  However, when trying to deploy another project to my file system, it said it was successful, but there were no files in the directory.  The only difference, the first project was an Azure project, the second was a standard ASP.Net Web Application.  If you installed the Windows Azure 1.7 SDK, you may want to read this. The Problem At first it appears that there is no problem: However you may remember that when publishing a web application, the output window will generally iterate through each of the directories as it copies the files from that directory over.  Sure enough, when looking at the output directory – there are no files, no bin directory, no nothing… Troubleshooting Since one site published and the other did not, I believed that the failure may have been to a failed SQL Server 2012 installation that happened between publish.  I rolled back the installation, however that did not work either.  I also checked the Configuration Manager dialog, and ensured that the projects were selected to actually build (just checking, even though the output said it built them..)  I checked the properties of the solution and the projects, and a selection of files in the project to make sure that they were selected for content…  Nothing seemed to work. I then decided to uninstall the Azure 1.7 SDK to see if that was the culprit.  When I opened the Windows 7 ‘Uninstall a Program’ dialog, I noticed that the Azure SDK came with 2 extra packages that just so happen to be in a Release Candidate state from Microsoft – ‘Microsoft Web Deploy 3.0’ and ‘Microsoft Web Publish – Visual Studio 2010’.  It dawned on me that the publish dialog must not be just for Azure, since it appeared when I tried to deploy the regular web application as well.  Therefore, it must have been an upgrade to the publish mechanism in Visual Studio.  I uninstalled both of the programs and received my old publish dialog once again, and was able to successfully publish the solution above as I had done before. After celebrating solving the problem, I tried reinstalling the Azure package, to see if it would repair the publishing process. Even though it brought back the updated dialogs, it did not publish any files. Instead of uninstalling and retreating, I now KNEW what the cause was, and these were packages not just for Azure. I now knew a product name to search for. The Solution Sure enough, with the correct search term in Google – ‘microsoft web publish no files’, and setting the timeline to 1 week, I found what I needed - Microsoft Connect - Publish Web Application FAILS! (by Andrew Rits). I am surprised that I missed something that ended up being so simple…  In the Configuration Manager, I had the following settings: This is how I had been building and debugging the solution always…  However, apparently when installing the new Web Publishing package, it does things a little differently in its configuration for publishing: You see the difference?  The configuration here is set to ‘x86’ instead of ‘Any CPU’.  Sure enough, as soon as I switched the configuration to ‘Release – Any CPU’, the deployment built and published all of my files as I expected. Conclusion It was a small change, but apparently the new ‘Publish web application’ defaults to the x86 configuration, thereby not copying any of the project/bin files to the publish target directory.  I spent forever trying things, but this small drop down eluded me until I was able to target that the dialog was actually working apparently, I just didn’t have the correct configuration. I hope that this saves you the hours of frustration and hastened hair loss that it caused me…  I also hope that before Microsoft brings this publishing package out of RC status, that they change the behavior of that menu to default to the settings of the old publish menu for the first time. Happy Coding!

  Read the article

• SQL SERVER – How to Compare the Schema of Two Databases with Schema Compare

  - by Pinal Dave

  Earlier I wrote about An Efficiency Tool to Compare and Synchronize SQL Server Databases and it was very much well received. Since the blog post I have received quite a many question that just like data how we can also compare schema and synchronize it. If you think about comparing the schema manually, it is almost impossible to do so. Table Schema has been just one of the concept but if you really want the all the schema of the database (triggers, views, stored procedure and everything else) it is just impossible task. If you are developer or database administrator who works in the production environment than you know that there are so many different occasions when we have to compare schema of the database. Before deploying any changes to the production server, I personally like to make note of the every single schema change and document it so in case of any issue , I can always go back and refer my documentation. As discussed earlier it is absolutely impossible to do this task without the help of third party tools. I personally use Devart Schema Compare for this task. This is an extremely easy tool. Let us see how it works. First I have two different databases – a) AdventureWorks2012 and b) AdventureWorks2012-V1. There are total three changes between these databases. Here is the list of the same. One of the table has additional column One of the table have new index One of the stored procedure is changed Now let see how dbForge Schema Compare works in this scenario. First open dbForge Schema Compare studio. Click on New Schema Comparison. It will bring you to following screen where we have to configure the database needed to configure. I have selected AdventureWorks2012 and AdventureWorks-V1 databases. In the next screen we can verify various options but for this demonstration we will keep it as it is. We will not change anything in schema mapping screen as in our case it is not required but generically if you are comparing across schema you may need this. This is the most important screen as on this screen we select which kind of object we want to compare. You can see the options which are available to select. The screen lets you select the objects from SQL Server 2000 to SQL Server 2012. Once you click on compare in previous screen it will bring you to this screen, which will essentially display the comparative difference between two of the databases which we had selected in earlier screen. As mentioned above there are three different changes in the database and the same has been listed over here. Two of the changes belongs to the tables and one changes belong to the procedure. Let us click each of them one by one to see what is the difference between them. In very first option we can see that there is an additional column in another database which did not exist earlier. In this example we can see that AdventureWorks2012 database have an additional index. Following example is very interesting as in this case, we have changed the definition of the stored procedure and the result pan contains the same. dbForget Schema Compare very effectively identify the changes in schema and lists them neatly to developers. Here is one more screen. This software not only compares the schema but also provides the options to update or drop them as per the choice. I think this is brilliant option. Well, I have been using schema compare for quite a while and have found it very useful. Here are few of the things which dbForge Schema Compare can do for developers and DBAs. Compare and synchronize SQL Server database schemas Compare schemas of live database and SQL Server backup Generate comparison reports in Excel and HTML formats Eliminate mistakes in schema changes propagation across environments Track production database changes and customizations Automate migration of schema changes using command line interface I suggest that you try out dbForge Schema Compare and let me know what you think of this product. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL

  Read the article

• Cross platform application revolution

  - by anirudha

  Every developer know that if they make a windows application that they work only on windows. that’s a small pity thing we all know. this is a lose point for windows application who make developer thing small means only for windows and other only for mac. this is a big point behind success of web because who purchase a operating system if they want to use a application on other platform. why they purchase when they can’t try them. that’s a thing better in Web means IE 6 no problem IE 6 to IE 8 chrome to chrome 8 Firefox to Firefox 3.6.13 even that’s beta no problem the good website is shown as same as other browser. some minor difference may be can see. the cross platform application development thinking is much big then making a application who is only for some audience. the difference between audience make by OS what they use Windows or mac. if they use mac they can’t use this they use windows they can’t use this. Web for Everyone starting from a children to grandfather. male and female Everyone can use internet.no worrying what you have even you have Windows or mac , any browser even as silly IE 6. the cross platform have a good thing that “People”. everyone can use them without a problem that. just like some time problem come in windows that “some component is missing click here to get them” , you can’t use this [apps] software because you have windows sp1 , sp2  sp3. you need to install this first before this. this stupidity mainly comes in Microsoft software. in last year i found a issue on WPI that they force user to install another software when they get them from WPI. ex:- you need to install Visual studio 2008 before installing Visual studio 2010 express. are anyone tell me why user get old version 2008 when they get latest and express version. i never try again their to check the issue is solved or not. a another thing is you can’t get IE 9 on windows XP version. in that’case don’t thing and worrying about them because Firefox and Chrome is much better. the stupidity from Microsoft is too much. they never told you about Firebug even sometime they discuss about damage tool in IE they called them developer tool because they are Microsoft and they only thing how they can market their products. you need to install many thing without any reason such as many SQL server component even you use other RDBMS. you can’t say no to them because you need a tool and tool require a useless component called SQL server. i never found any software force me to install this for this and this for this before install me. that’s another good thing in WEB that no thing require i means you not need to install dotnet framework 4 before enjoy facebook or twitter. may be you found out that Microsoft's fail project Window planet force you to get silverlight before going their. i never hear about them. some month ago my friend talked to me about them i found nothing better their. Wha’t user do when facebook force user to install silverlight or adobe flash or may be Microsoft dotnet framework 4. if you not install them facebook tell  you bye bye tata ! never come here before installing Microsoft dotnet framework 4. the door is open for you after installing them not before. the story is same as “ tell me sorry before coming in home” as mother says to their child when they do something wrong. the web never force you to do something for them. sometime they allow you to use other website account their that’s very fast login for you. because they know the importance of your time.

  Read the article

• SQL SERVER – Solution of Puzzle – Swap Value of Column Without Case Statement

  - by pinaldave

  Earlier this week I asked a question where I asked how to Swap Values of the column without using CASE Statement. Read here: SQL SERVER – A Puzzle – Swap Value of Column Without Case Statement. I have proposed 3 different solutions in the blog posts itself. I had requested the help of the community to come up with alternate solutions and honestly I am stunned and amazed by the qualified entries. I will be not able to cover every single solution which is posted as a comment, however, I would like to for sure cover few interesting entries. However, I am selecting 5 solutions which are different (not necessary they are most optimal or best – just different and interesting). Just for clarity I am involving the original problem statement here. USE tempdb GO CREATE TABLE SimpleTable (ID INT, Gender VARCHAR(10)) GO INSERT INTO SimpleTable (ID, Gender) SELECT 1, 'female' UNION ALL SELECT 2, 'male' UNION ALL SELECT 3, 'male' GO SELECT * FROM SimpleTable GO -- Insert Your Solutions here -- Swap value of Column Gender SELECT * FROM SimpleTable GO DROP TABLE SimpleTable GO Here are the five most interesting and different solutions I have received. Solution by Roji P Thomas UPDATE S SET S.Gender = D.Gender FROM SimpleTable S INNER JOIN SimpleTable D ON S.Gender != D.Gender I really loved the solutions as it is very simple and drives the point home – elegant and will work pretty much for any values (not necessarily restricted by the option in original question ‘male’ or ‘female’). Solution by Aneel CREATE TABLE #temp(id INT, datacolumn CHAR(4)) INSERT INTO #temp VALUES(1,'gent'),(2,'lady'),(3,'lady') DECLARE @value1 CHAR(4), @value2 CHAR(4) SET @value1 = 'lady' SET @value2 = 'gent' UPDATE #temp SET datacolumn = REPLACE(@value1 + @value2,datacolumn,'') Aneel has very interesting solution where he combined both the values and replace the original value. I personally liked this creativity of the solution. Solution by SIJIN KUMAR V P UPDATE SimpleTable SET Gender = RIGHT(('fe'+Gender), DIFFERENCE((Gender),SOUNDEX(Gender))*2) Sijin has amazed me with Difference and Soundex function. I have never visualized that above two functions can resolve the problem. Hats off to you Sijin. Solution by Nikhildas UPDATE St SET St.Gender = t.Gender FROM SimpleTable St CROSS Apply (SELECT DISTINCT gender FROM SimpleTable WHERE St.Gender != Gender) t I was expecting that someone will come up with this solution where they use CROSS APPLY. This is indeed very neat and for sure interesting exercise. If you do not know how CROSS APPLY works this is the time to learn. Solution by mistermagooo UPDATE SimpleTable SET Gender=X.NewGender FROM (VALUES('male','female'),('female','male')) AS X(OldGender,NewGender) WHERE SimpleTable.Gender=X.OldGender As per author this is a slow solution but I love how syntaxes are placed and used here. I love how he used syntax here. I will say this is the most beautifully written solution (not necessarily it is best). Bonus: Solution by Madhivanan Somehow I was confident Madhi – SQL Server MVP will come up with something which I will be compelled to read. He has written a complete blog post on this subject and I encourage all of you to go ahead and read it. Now personally I wanted to list every single comment here. There are some so good that I am just amazed with the creativity. I will write a part of this blog post in future. However, here is the challenge for you. Challenge: Go over 50+ various solutions listed to the simple problem here. Here are my two asks for you. 1) Pick your best solution and list here in the comment. This exercise will for sure teach us one or two things. 2) Write your own solution which is yet not covered already listed 50 solutions. I am confident that there is no end to creativity. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Function, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• help: cannot make ubuntu 64-bit v12.04 install work

  - by honestann

  I decided it was time to update my ubuntu (single boot) computer from 64-bit v10.04 to 64-bit v12.04. Unfortunately, for some reason (or reasons) I just can't make it work. Note that I am attempting a fresh install of 64-bit v12.04 onto a new 3TB hard disk, not an upgrade of the 1TB hard disk that has contained my 64-bit v10.04 installation. To perform the attempted install of v12.04 I unplug the SATA cable from the 1TB drive and plug it into the 3TB drive (to avoid risking damage to my working v10.04 installation). I downloaded the ubuntu 64-bit v12.04 install DVD ISO file (~1.6 GB) from the ubuntu releases webpage and burned it onto a DVD. I have downloaded the DVD ISO file 3 times and burned 3 of these installation DVDs (twice with v10.04 and once with my winxp64 system), but none of them work. I run the "check disk" on the DVDs at the beginning of the installation process to assure the DVD is valid. I also tried to install on two older 250GB seagate drives in the same computer. During every attempt I plug the same SATA cable (sda) into only one disk drive (the 3TB or one of the 250GB drives) and leave the other disk drives unconnected (for simplicity). Installation takes about 30 minutes on the 250GB drives, and about 60 minutes on the 3TB drive - not sure why. When I install on the 250GB drives, the install process finishes, the computer reboots (after the install DVD is removed), but I get a grub error 15. It is my understanding that 64-bit ubuntu (and 64-bit linux in general) has no problem with 3TB disk drives. In the BIOS I have tried having EFI set to "enabled" and "auto" with no apparent difference (no success). I have tried partitioning the drive in a few ways to see if that makes a difference, but so far it has not mattered. Typically I manually create partitions something like this: 8GB swap 8GB /boot ext4 3TB / ext4 But I've also tried the following, just in case it matters: 100MB boot efi 8GB swap 8GB /boot ext4 3TB / ext4 Note: In the partition dialog I specify bootup on the same drive I am partitioning and installing ubuntu v12.04 onto. It is a VERY DANGEROUS FACT that the default for this always comes up with the wrong drive (some other drive, generally the external drive). Unless I'm stupid or misunderstanding something, this is very wrong and very dangerous default behavior. Note: If I connect the SATA cable to the 1TB drive that has been my ubuntu 64-bit v10.04 system drive for the past 2 years, it boots up and runs fine. I guess there must be a log file somewhere, and maybe it gives some hints as to what the problem is. I should be able to boot off the 1TB drive with the 3TB drive connected as a secondary (non-boot) drive and get the log file, assuming there is one and someone tells me the name (and where to find it if the name is very generic). After installation on the 3TB drive completes and the system reboots, the following prints out on a black screen: Loading Operating System ... Boot from CD/DVD : Boot from CD/DVD : error: unknown filesystem grub rescue Note: I have two DVD burners in the system, hence the duplicate line above. The same install and reboot on the 250GB drives generates "grub error 15". Sigh. Any ideas? ========== motherboard == gigabyte 990FXA-UD7 CPU == AMD FX-8150 8-core bulldozer @ 3.6 GHz RAM == 8GB of DDR3 in 2 sticks (matched pair) HDD == seagate 3TB SATA3 @ 7200 rpm (new install 64-bit v12.04) HDD == seagate 1TB SATA3 @ 7200 rpm (current install 64-bit v10.04) GPU == nvidia GTX-285 ??? == no overclocking or other funky business USB == external seagate 2TB HDD for making backups DVD == one bluray burner (SATA) DVD == one DVD burner (SATA) The current ubuntu 64-bit v10.04 system boots and runs fine on a seagate 1TB.

  Read the article

• The enterprise vendor con - connecting SSD's using SATA 2 (3Gbits) thus limiting there performance

  - by tonyrogerson

  When comparing SSD against Hard drive performance it really makes me cross when folk think comparing an array of SSD running on 3GBits/sec to hard drives running on 6GBits/second is somehow valid. In a paper from DELL (http://www.dell.com/downloads/global/products/pvaul/en/PowerEdge-PowerVaultH800-CacheCade-final.pdf) on increasing database performance using the DELL PERC H800 with Solid State Drives they compare four SSD drives connected at 3Gbits/sec against ten 10Krpm drives connected at 6Gbits [Tony slaps forehead while shouting DOH!]. It is true in the case of hard drives it probably doesn’t make much difference 3Gbit or 6Gbit because SAS and SATA are both end to end protocols rather than shared bus architecture like SCSI, so the hard drive doesn’t share bandwidth and probably can’t get near the 600MiBytes/second throughput that 6Gbit gives unless you are doing contiguous reads, in my own tests on a single 15Krpm SAS disk using IOMeter (8 worker threads, queue depth of 16 with a stripe size of 64KiB, an 8KiB transfer size on a drive formatted with an allocation size of 8KiB for a 100% sequential read test) I only get 347MiBytes per second sustained throughput at an average latency of 2.87ms per IO equating to 44.5K IOps, ok, if that was 3GBits it would be less – around 280MiBytes per second, oh, but wait a minute [...fingers tap desk] You’ll struggle to find in the commodity space an SSD that doesn’t have the SATA 3 (6GBits) interface, SSD’s are fast not only low latency and high IOps but they also offer a very large sustained transfer rate, consider the OCZ Agility 3 it so happens that in my masters dissertation I did the same test but on a difference box, I got 374MiBytes per second at an average latency of 2.67ms per IO equating to 47.9K IOps – cost of an 240GB Agility 3 is £174.24 (http://www.scan.co.uk/products/240gb-ocz-agility-3-ssd-25-sata-6gb-s-sandforce-2281-read-525mb-s-write-500mb-s-85k-iops), but that same drive set in a box connected with SATA 2 (3Gbits) would only yield around 280MiBytes per second thus losing almost 100MiBytes per second throughput and a ton of IOps too. So why the hell are “enterprise” vendors still only connecting SSD’s at 3GBits? Well, my conspiracy states that they have no interest in you moving to SSD because they’ll lose so much money, the argument that they use SATA 2 doesn’t wash, SATA 3 has been out for some time now and all the commodity stuff you buy uses it now. Consider the cost, not in terms of price per GB but price per IOps, SSD absolutely thrash Hard Drives on that, it was true that the opposite was also true that Hard Drives thrashed SSD’s on price per GB, but is that true now, I’m not so sure – a 300GByte 2.5” 15Krpm SAS drive costs £329.76 ex VAT (http://www.scan.co.uk/products/300gb-seagate-st9300653ss-savvio-15k3-25-hdd-sas-6gb-s-15000rpm-64mb-cache-27ms) which equates to £1.09 per GB compared to a 480GB OCZ Agility 3 costing £422.10 ex VAT (http://www.scan.co.uk/products/480gb-ocz-agility-3-ssd-25-sata-6gb-s-sandforce-2281-read-525mb-s-write-410mb-s-30k-iops) which equates to £0.88 per GB. Ok, I compared an “enterprise” hard drive with a “commodity” SSD, ok, so things get a little more complicated here, most “enterprise” SSD’s are SLC and most commodity are MLC, SLC gives more performance and wear, I’ll talk about that another day. For now though, don’t get sucked in by vendor marketing, SATA 2 (3Gbit) just doesn’t cut it, SSD need 6Gbit to breath and even that SSD’s are pushing. Alas, SSD’s are connected using SATA so all the controllers I’ve seen thus far from HP and DELL only do SATA 2 – deliberate? Well, I’ll let you decide on that one.

  Read the article

• Whether to use UNION or OR in SQL Server Queries

  - by Dinesh Asanka

  Recently I came across with an article on DB2 about using Union instead of OR. So I thought of carrying out a research on SQL Server on what scenarios UNION is optimal in and which scenarios OR would be best. I will analyze this with a few scenarios using samples taken  from the AdventureWorks database Sales.SalesOrderDetail table. Scenario 1: Selecting all columns So we are going to select all columns and you have a non-clustered index on the ProductID column. --Query 1 : OR SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR ProductID =709 OR ProductID =998 OR ProductID =875 OR ProductID =976 OR ProductID =874 --Query 2 : UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 709 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 998 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 875 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 976 UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 874 So query 1 is using OR and the later is using UNION. Let us analyze the execution plans for these queries. Query 1 Query 2 As expected Query 1 will use Clustered Index Scan but Query 2, uses all sorts of things. In this case, since it is using multiple CPUs you might have CX_PACKET waits as well. Let’s look at the profiler results for these two queries: CPU Reads Duration Row Counts OR 78 1252 389 3854 UNION 250 7495 660 3854 You can see from the above table the UNION query is not performing well as the  OR query though both are retuning same no of rows (3854).These results indicate that, for the above scenario UNION should be used. Scenario 2: Non-Clustered and Clustered Index Columns only --Query 1 : OR SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR ProductID =709 OR ProductID =998 OR ProductID =875 OR ProductID =976 OR ProductID =874 GO --Query 2 : UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 709 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 998 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 875 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 976 UNION SELECT ProductID,SalesOrderID, SalesOrderDetailID FROM Sales.SalesOrderDetail WHERE ProductID = 874 GO So this time, we will be selecting only index columns, which means these queries will avoid a data page lookup. As in the previous case we will analyze the execution plans: Query 1 Query 2 Again, Query 2 is more complex than Query 1. Let us look at the profile analysis: CPU Reads Duration Row Counts OR 0 24 208 3854 UNION 0 38 193 3854 In this analyzis, there is only slight difference between OR and UNION. Scenario 3: Selecting all columns for different fields Up to now, we were using only one column (ProductID) in the where clause.  What if we have two columns for where clauses and let us assume both are covered by non-clustered indexes? --Query 1 : OR SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR CarrierTrackingNumber LIKE 'D0B8%' --Query 2 : UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT * FROM Sales.SalesOrderDetail WHERE CarrierTrackingNumber  LIKE 'D0B8%' Query 1 Query 2: As we can see, the query plan for the second query has improved. Let us see the profiler results. CPU Reads Duration Row Counts OR 47 1278 443 1228 UNION 31 1334 400 1228 So in this case too, there is little difference between OR and UNION. Scenario 4: Selecting Clustered index columns for different fields Now let us go only with clustered indexes: --Query 1 : OR SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 OR CarrierTrackingNumber LIKE 'D0B8%' --Query 2 : UNION SELECT * FROM Sales.SalesOrderDetail WHERE ProductID = 714 UNION SELECT * FROM Sales.SalesOrderDetail WHERE CarrierTrackingNumber  LIKE 'D0B8%' Query 1 Query 2 Now both execution plans are almost identical except is an additional Stream Aggregate is used in the first query. This means UNION has advantage over OR in this scenario. Let us see profiler results for these queries again. CPU Reads Duration Row Counts OR 0 319 366 1228 UNION 0 50 193 1228 Now see the differences, in this scenario UNION has somewhat of an advantage over OR. Conclusion Using UNION or OR depends on the scenario you are faced with. So you need to do your analyzing before selecting the appropriate method. Also, above the four scenarios are not all an exhaustive list of scenarios, I selected those for the broad description purposes only.

  Read the article

• Improve Playback Using Enhancements in Windows Media Player 12

  - by DigitalGeekery

  Are you looking for ways to improve the playback of your media in Windows Media Player 12? We’ll show you how to do that by using the enhancements in WMP 12. If you are in Library mode, you’ll need to click the icon at the lower right to switch to Now Playing mode. Right-click anywhere in Media Player while in Now Playing mode, select Enhancements, and select any of the available options.   You can switch between the individual enhancements by clicking the right and left buttons at the top left.   Crossfading and Auto Volume Leveling The Auto Volume Leveling setting is just a simple toggle on and off. If your MP3 or WMA files have volume leveling information values.   You can automatically add volume leveling information values to all files you add to your library by switching to Library view, going to Tools > Options, and selecting Add volume leveling information values for new files on the Library tab. Click OK when finished.   Crossfading will gradually decrease the volume of the song that is ending (fade out) and increase volume of the song that is beginning. Click Turn on Crossfading and then click and drag the slider left or right change the amount of overlap between tracks. Graphic Equalizer The graphic equalizer is toggled on and off by clicking Turn on / Turn off at the top left. You can select pre-defined equalizer settings by music genre by clicking the Default list. The radio buttons on the left allow you to move the sliders individually, in a loose group or a tight group. You can always return to the default settings by clicking Reset. Play Speed Settings Choose a pre-defined settings by clicking Slow, Normal, or Fast. Uncheck the Snap slider to common speeds the move the slider right and left to your desired speed. If nothing else, these settings provide a little fun and amusement. Quiet Mode Quiet mode will level out any sharp volume highs and lows within a single track. Simply toggle the setting on or off and select whether you prefer Medium difference or Little difference by selecting one of the radio buttons. SRS WOW effects SRS WOW effects enhance low-frequency and stereo sound performance. Click Turn on to enable the TruBass and WOW Effect sliders. You can also optimize for your speaker type. Click to switch between Regular, Large, and Headphones. Video Settings Video Settings allow you to adjust the Hue, Brightness, Saturation, and Contrast.   You can also adjust the zoom settings by clicking Select video zoom settings.   Dolby Digital Settings Choose between Normal, Night, and Theater settings to adjust the audio for Dolby Digital content. This setting will only effect media with Dolby Digital sound. Looking for more ways to improve your media experience in WMP 12? Check out how to update metadata and cover art and how to share media with other Windows 7 computers on your home network. Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxHow To Rip a Music CD in Windows 7 Media CenterStream Media from Windows 7 to XP with VLC Media PlayerInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor

  Read the article

• How do I get sound output on HDMI without the need to start X?

  - by Magnus Hoff

  I have a headless machine connected to my sound system, and I am using it to run a music playing daemon that I control over the network. (Among other things) However, I can't seem to be able to have sound come out of my speakers without running X. I am running pulse audio in a system wide instance and my daemon is not running within X. Nevertheless, when my daemon is playing music without me hearing it, I can fix it by running startx in an unrelated session. After X starts, I can hear the sound. The sound disappears again if I kill the X server. Interestingly/annoyingly, the sound also stops after X has been running for a few minutes. This could possibly be because of a screen saver of some sort, but I haven't been able to verify or falsify this theory. So my current workaround is to ssh into the box whenever I want music and startx, and restart it every fifteen minutes or so. I'd like to do better. I have been able to verify the following: Adjustments in alsamixer have no effect on this problem. The relevant output channel is never muted In alsamixer, I can see no difference between when the sound is working and when it isn't Nothing is muted in pactl list There is no difference in the output from pactl list between before starting X and after it's started. (Except the identifier of the pactl instance connected to pulse, which is different each time you run pactl) The user running the music daemon is a member of the groups audio, pulse and pulse-access The music daemon program does not report any error messages and acts as if it is playing the music like it should Some form of dbus daemon is running. ps aux|grep dbus reports dbus-daemon --system --fork --activation=upstart before and after I have started X Some details about my hardware: Motherboard: http://www.asus.com/Motherboards/AT5IONTI_DELUXE/ Sound chip: Nvidia GPU 0b HDMI/DP (from alsamixer) Using HDMI for output (Machine also has an Intel Realtek ALC887 that I am not using) Output of lsmod: Module Size Used by deflate 12617 0 zlib_deflate 27139 1 deflate ctr 13201 0 twofish_generic 16635 0 twofish_x86_64_3way 25287 0 twofish_x86_64 12907 1 twofish_x86_64_3way twofish_common 20919 3 twofish_generic,twofish_x86_64_3way,twofish_x86_64 camellia 29348 0 serpent 29125 0 blowfish_generic 12530 0 blowfish_x86_64 21466 0 blowfish_common 16739 2 blowfish_generic,blowfish_x86_64 cast5 25112 0 des_generic 21415 0 xcbc 12815 0 rmd160 16744 0 bnep 18281 2 rfcomm 47604 12 sha512_generic 12796 0 crypto_null 12918 0 parport_pc 32866 0 af_key 36389 0 ppdev 17113 0 binfmt_misc 17540 1 nfsd 281980 2 ext2 73795 1 nfs 436929 1 lockd 90326 2 nfsd,nfs fscache 61529 1 nfs auth_rpcgss 53380 2 nfsd,nfs nfs_acl 12883 2 nfsd,nfs sunrpc 255224 16 nfsd,nfs,lockd,auth_rpcgss,nfs_acl btusb 18332 2 vesafb 13844 2 pl2303 17957 1 ath3k 12961 0 bluetooth 180153 24 bnep,rfcomm,btusb,ath3k snd_hda_codec_hdmi 32474 4 nvidia 11308613 0 ftdi_sio 40679 1 usbserial 47113 6 pl2303,ftdi_sio psmouse 97485 0 snd_hda_codec_realtek 224173 1 snd_hda_intel 33719 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel serio_raw 13211 0 snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 79041 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device asus_atk0110 18078 0 mac_hid 13253 0 jc42 13948 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm coretemp 13554 0 i2c_i801 17570 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62154 0 Any ideas? What does X do that's so important?

  Read the article

• Quaternion dfference + time --> angular velocity (gyroscope in physics library)

  - by AndrewK

  I am using Bullet Physic library to program some function, where I have difference between orientation from gyroscope given in quaternion and orientation of my object, and time between each frame in milisecond. All I want is set the orientation from my gyroscope to orientation of my object in 3D space. But all I can do is set angular velocity to my object. I have orientation difference and time, and from that I calculate vector of angular velocity [Wx,Wy,Wz] from that formula: W(t) = 2 * dq(t)/dt * conj(q(t)) My code is: btQuaternion diffQuater = gyroQuater - boxQuater; btQuaternion conjBoxQuater = gyroQuater.inverse(); btQuaternion velQuater = ((diffQuater * 2.0f) / d_time) * conjBoxQuater; And everything works well, till I get: 1 rotating around Y axis, angle about 60 degrees, then I have these values in 2 critical frames: x: -0.013220 y: -0.038050 z: -0.021979 w: -0.074250 - diffQuater x: 0.120094 y: 0.818967 z: 0.156797 w: -0.538782 - gyroQuater x: 0.133313 y: 0.857016 z: 0.178776 w: -0.464531 - boxQuater x: 0.207781 y: 0.290452 z: 0.245594 - diffQuater -> euler angles x: 3.153619 y: -66.947929 z: 175.936615 - gyroQuater -> euler angles x: 4.290697 y: -57.553043 z: 173.320053 - boxQuater -> euler angles x: 0.138128 y: 2.823307 z: 1.025552 w: 0.131360 - velQuater d_time: 0.058000 x: 0.211020 y: 1.595124 z: 0.303650 w: -1.143846 - diffQuater x: 0.089518 y: 0.771939 z: 0.144527 w: -0.612543 - gyroQuater x: -0.121502 y: -0.823185 z: -0.159123 w: 0.531303 - boxQuater x: nan y: nan z: nan - diffQuater -> euler angles x: 2.985240 y: -76.304405 z: -170.555054 - gyroQuater -> euler angles x: 3.269681 y: -65.977966 z: 175.639420 - boxQuater -> euler angles x: -0.730262 y: -2.882153 z: -1.294721 w: 63.325996 - velQuater d_time: 0.063000 2 rotating around X axis, angle about 120 degrees, then I have these values in 2 critical frames: x: -0.013045 y: -0.004186 z: -0.005667 w: -0.022482 - diffQuater x: -0.848030 y: -0.187985 z: 0.114400 w: 0.482099 - gyroQuater x: -0.834985 y: -0.183799 z: 0.120067 w: 0.504580 - boxQuater x: 0.036336 y: 0.002312 z: 0.020859 - diffQuater -> euler angles x: -113.129463 y: 0.731925 z: 25.415056 - gyroQuater -> euler angles x: -110.232368 y: 0.860897 z: 25.350458 - boxQuater -> euler angles x: -0.865820 y: -0.456086 z: 0.034084 w: 0.013184 - velQuater d_time: 0.055000 x: -1.721662 y: -0.387898 z: 0.229844 w: 0.910235 - diffQuater x: -0.874310 y: -0.200132 z: 0.115142 w: 0.426933 - gyroQuater x: 0.847352 y: 0.187766 z: -0.114703 w: -0.483302 - boxQuater x: -144.402298 y: 4.891629 z: 71.309158 - diffQuater -> euler angles x: -119.515343 y: 1.745076 z: 26.646086 - gyroQuater -> euler angles x: -112.974533 y: 0.738675 z: 25.411509 - boxQuater -> euler angles x: 2.086195 y: 0.676526 z: -0.424351 w: 70.104248 - velQuater d_time: 0.057000 2 rotating around Z axis, angle about 120 degrees, then I have these values in 2 critical frames: x: -0.000736 y: 0.002812 z: -0.004692 w: -0.008181 - diffQuater x: -0.003829 y: 0.012045 z: -0.868035 w: 0.496343 - gyroQuater x: -0.003093 y: 0.009232 z: -0.863343 w: 0.504524 - boxQuater x: -0.000822 y: -0.003032 z: 0.004162 - diffQuater -> euler angles x: -1.415189 y: 0.304210 z: -120.481873 - gyroQuater -> euler angles x: -1.091881 y: 0.227784 z: -119.399445 - boxQuater -> euler angles x: 0.159042 y: 0.169228 z: -0.754599 w: 0.003900 - velQuater d_time: 0.025000 x: -0.007598 y: 0.024074 z: -1.749412 w: 0.968588 - diffQuater x: -0.003769 y: 0.012030 z: -0.881377 w: 0.472245 - gyroQuater x: 0.003829 y: -0.012045 z: 0.868035 w: -0.496343 - boxQuater x: -5.645197 y: 1.148993 z: -146.507187 - diffQuater -> euler angles x: -1.418294 y: 0.270319 z: -123.638245 - gyroQuater -> euler angles x: -1.415183 y: 0.304208 z: -120.481873 - boxQuater -> euler angles x: 0.017498 y: -0.013332 z: 2.040073 w: 148.120056 - velQuater d_time: 0.027000 The problem is the most visible in diffQuater - euler angles vector. Can someone tell me why it is like that? and how to solve that problem? All suggestions are welcome.

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >