Search Results

Search found 9417 results on 377 pages for 'tablet pc'.

Page 130/377 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

• Connect a Sitecom WL-174 to another wireless router

  - by Thijs Wouters

  I used to connect via a Sitecom WL-174 directly to ADSL internet. There were some pc's which connected wirelessly and some connected with a wire. Now we got another provider and we need to use the router which came with it. It is also a wireless router. It works perfectly. But I need to connect the other pc's which were connected with a wire previously. Is it possible to connect the Sitecom router wirelessly to the other router? If so, how? Thanks.

  Read the article

• Changing the IP address with a name [closed]

  - by fede

  I have a web server (xampp) in a particular PC running on my LAN, and I added the following line in the 'hosts' file : 127.0.0.1 mysite. Then, in another PC connected to the LAN, I'm trying to acces the previous web server by typing 'http://mysite/index.php' on the web browser, with no luck. But if I type the IP from the server computer (http://192.168.2.87/index.php) I am able to access the web site. So, what should i configure so when i type 'http://mysite/index.php' I get the same result as http:// 192.168.2.87/index.php ?? Thanx!

  Read the article

• PHPMyAdmin running very slow over internet but fine locally

  - by columbo

  I connect to PHPMyAdmin remotely on a Centos server using my local PC via Firefox. Usually it's fine but today it's really slow (2 minutes to load a page), sometimes timing out. Other connections to the server are fine. The SSH command line is as fast as ever as is the GNOME dekstop over SSH. In fact on the GNOME desktop I can run PHPMyAdmin locally from its browser and it's as quick as ever (which is a solution to the problem of course). I've checked the various log files and seen nothing unusual, I've logged into the MySQL command line and the database is running fine without any slowing what so ever. So it just seems to be slow when I access PHPMyAdmin on the server from the browser on my remote PC (I've tried IE and Firefox, both are slow). Has anyone experienced this or have any ideas what the issue could be. Connecting via CLI through tunnel works OK - problem is in phpMyAdmin for sure. Cheers

  Read the article

• Windows 7: How to boot up in normal mode after improper shut down?

  - by Level1Coder

  I work in two different locations and whenever there is a power outage at one of the locations, Windows 7 detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows 7 enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows 7 always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• Can't copy files from network drive

  - by user630320

  I have weird problem with copying files. When I copy file from network drive into C drive nothing happens but when I copy file from network drive to desktop I can copy the file. Also if I copy files from desktop into C it works fine. I have full local admin permission on this PC and the network drive. I have try these things Created new profile Run Windows Update Run checkdisk I'm using Windows XP 32bit pro Update: Network path: \\server1\shared\folder PC: C:\ (this doesn't work) C:\Documents and settings\Userid\Desktop (This works fine)

  Read the article

• Possible HDD malfunction. Need help in diagnosing

  - by Protheus

  Today when using my PC as I did for almost 4 years I experienced the following: during opening new tab in Opera browser screen froze. Music (AIMP 3) continued to play for about 5 minutes and then stopped too. I tried Ctrl+Alt+Del, but win7 lock screen didn't appear. Caps\Scroll or Num locks didn't switch diodes on keyboard. I rebooted my PC and saw that BIOS suggests me to enter it's settings or load by default. I chose default. It don't see proper boot device (old faitful "insert proper boot" something). After second reboot it said that there is no ExpressGate installed (which i turned off in BIOS years ago). I went into BIOS setting to turn off ExpressGate and see configs: time was not set off, all hard drives present, temp and O.C. settings are nominal (no O.C.) I've inserted my Win7 install disk to try recovery. It did load awfully long (about few minutes) and didn't see current installation. PC was utilized in 24/7 mode for almost all these years. Hardware configuration: ASUS P5Q WS Core 2 Quad Q9300 (2.5GHz no O.C.) MSI geForce GTX 460 4x2 Gb GeIL EVO 2 (AFAIR) Seagate something 750Gb (4 years as system HDD 24/7) WD 1Tb (for random stuff, 5 y.o.) Hitachi 500Gb (for even more random stuff, 6 y.o.) NEC DVDRW (ALL DISKS ARE SATA) Cooler Master Silent Pro 700W Software: Windows 7 AND Kubuntu on the same drive with GRUB loader. Sorry I can't remember HDDs and can't see them right now, but I think their models aren't relevant anyway. My idea is that due to some system error or hard drive glitch i've wrecked my primary HDD's MBR. Nevertheless I don't exclude the possibility of other failure. May it's be that motherboard or it's SATA controller? Doubt it, because all drives are seen in BIOS and I could load from DVD. Maybe GRUB got bugged somehow, although I don't see how it's possible from Windows. But I did install KUbuntu from Windows (i wasn't myself then), maybe GRUB did write itself in some windows partition and got rewriteen in process? Right now I am at work with my flash drive with me and I need some advice how to fix MBR or to hear if it's not MBR. I'm going to buy new HDD (Hitachi 7k2000) because I think that my current HDD is compromised and it's unsafe to use it as system drive, especially 24/7.

  Read the article

• In Process Explorer is it possible change scaling of activity graph the be able to further analyse graph?

  - by therobyouknow

  Is there any way to zoom in, in the System Internals Process Explorer graph? Background I'm trying to work out why my PC freezes/locks up for about a second (the pointer does not move) every so often. This has only been happening for the last 2 days. There is a very narrow spike associated with the freeze, but it's hard to hover over it an analyse what is causing it. My PC spec: ThinkPad X201S 1440x900 i7 2.0GHz 8Gb RAM, 256GB Samsung 840Pro SSD, Windows 8.1 Pro 64bit CalDigit USB 3.0 ExpressCard 34, Ultrabase X200 with DisplayPort to HDMI

  Read the article

• Notebook display not working properly

  - by jfcfar

  I have an old Acer TM4001 notebook. If the laptop is powered-off, with the lid closed, when I power it on, it generally works. Then, without touching anything, if I reboot the computer the internal display wil not work anymore. To make it working again I need to shut down the pc, close and reopen the lid and then turn it on. If I close and reopen the lid if it is not working after power the pc on, it won't work. When the screen is working, closing and opening it has no effect (the data cable seems ok). The external monitor always works as expected: If the internal display is not detected, the external will be the main (and only) display. This is not OS-related. When the screen is not working I cannot see the POST. What could be the cause for this?

  Read the article

• Windows backups to VM Esxi

  - by Martyn

  I'm very new to ESXi, so apologies if this is a silly question. I have ESXi 5.1 running running on HP Proliant Microserver with internal LUNs RAIDed with HP P410 Smart Array card. I have 2 Windows Server 2012 VMs running as Domain controllers. These are being backed-up up with GhettoVCB to a dedicated datastore hosted on LUNs on a eSata external device. I have several Windows 8 & 7 PC's connected to this domain. I want to back up these Windows PCs, via the built in backup software, ideally to the external eSata device as well. What do I need to do to have the Windows PC's see the datastore? I assume I could create a VM for FreeNas or something, or share out the datastore via one of the Windows Server 2012 VMs. Both those options seem a little bit of an over kill?

  Read the article

• Sync content from my iPad to iTunes? i.e. "reverse" syncing

  - by Jim

  I recently had to reset my PC back to factory settings which lost my entire iTunes library. I still have my music and other files on my iPad and want to sync it back to the PC. Upon syncing it only gives me two options. "Erase and Sync" which replaces the contents of my iPad with the blank iTunes library, or, "Transfer Purchases" which reads like it will only transfer the purchases from iPad to iTunes. I would like to avoid re-burning my entire CD library to iTunes all over again. Is there a way for me to sync the iPad to the iTunes library (aka the computer)?

  Read the article

• How to stop any dialog windows from showing when inserting a USB drive in Windows?

  - by jasondavis

  1) I just found a really interesting program that allows me to use a USB drive as a windows login key. It is called Rohos Logon Key. IF I remobve my USB drive/key from the PC then I can have the PC lock or hibernate or any other option, I have been looking for such a solution for many years but never knew one existed until this and it works much better then I imagined. I do have a couple minor issues though (im using Windows 7 pro). When I remove and then re-insert my USB key, windows prompts me with this dialog here... Generally when I get this I just click on "Continue without scanning" however I am looking for a solution to just make it not even show this at all, is it possible to disable it from showing? 2) I also get this dialog as well when I insert USB drives/key... Would it be possible to not show this as well or have it pick an option by default or anything really?

  Read the article

• windows 8 on macbook locks after 2 mins despite high performance settings

  - by Mark

  I am running my Macbook Prop as a Windows 8 machine using bootcamp and for some reason, when I leave the keyboard/mouse alone for 2 mins it locks the PC (i.e. goes to the lock screen). I have (of course) checked the power settings and I can assure you that it is not set to these settings. I did notice that when I added my work's Mail Account the computer asked me to accept some group policy settings, which I did, so I suspect that this is a group policy setting, but I cannot find it. Can someone help? P.S. I have searched these forums first, and this is different to the PC going to sleep once locked, this is locking while logged in after 2 mins. Thanks.

  Read the article

• Improving sound quality with remote ESD server

  - by cuu508

  Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

  Read the article

• How to meet Windows 8 upgrade's 20 GB requirement on a 40 GB SSD with a 22 GB Windows 7 install?

  - by deryus

  A PC I have has Windows 7 installed on a 40 GB SSD, and I bought a Windows 8 upgrade for it. The current Windows folder on it however is 22 GB, that's after removing hibernation, turning off the pagefile and removing all extra programs/features. So even if I purge every other file and folder, the Windows folder itself takes more than half the disk. The PC also has a 1 TB HDD, but the upgrade installer didn't give me any options about choosing another drive. So, is my only option to reinstall Windows 7 on a larger drive, then proceed with the Windows 8 upgrade? Or is there anything I can remove from the Windows folder that while might be dangerous for long term usage, is fine for the few minutes I need to get Windows 8 installing?

  Read the article

• How to connect another computer to the router

  - by Call Me Dummy

  I already have a Windows 7 PC connected to my NETGEAR WGR614v10 router and I am able to use internet in that computer. Now I need to connect one of my old computer to the router to share the internet. It's also running Windows 7. I already connected it to the router via a CAT-5 cable but I am not able to use internet. The first computer was set up by a technician. Its IP address is 192.168.1.3, and the default gateway is 192.168.1.1. On the second PC, I changed the IPv4 to 192.168.1.4 and default gateway and preferred DNS to 192.168.1.1, but it's not working. What can I do?

  Read the article

• How to prevent windows 7 shutdown/lock/logoff?

  - by user507993

  Hi, guys In my company staff have to check in after retch to company and check out before leave company on a internal site, sometimes I forget it totally...it's awful. Now i want a program which shows a prompt window when lock/logoff/shutdown, in this way i won't forget any more. Indeed i develop a program (some words and two buttons), and configure this program started when lock/logoff/shutdown in group policy, here is the question: how can i prevent my windows 7 shutdown/logoff/lock? it means i click the button "yes, i want" my pc still running and chrome or something showed up, if i click the button "no, thanks", my pc will shutdown/logoff/lock. please help, thx! i am looking forward to you. ps: i am not good in english, hope you understand. thx again!

  Read the article

• Why does it sometimes take over a minute for Apache2.2 to serve a static page?

  - by Jason Lamoreux

  We have a Windows Server 2003 machine running Apache2.2. Most of the time there is no load on the server, but we have a notification program on 3400 PC's that can request a small web page that plays a 64KB .wav file. When an event occurs those 3400 PC's all request the web page over the course of 3 minutes. On a few machine we saw the browser sit in the "connecting" state for a little over a minute before the page painted. What is happening, and how can we speed this up?

  Read the article

• Trying to figure Windows 2008 Server and Active Directory - complete novice!

  - by Simon E

  I am a novice in networking and I want to learn more about Windows Server 2008 and Active Directory. Basically I have serveral Windows 7 PC's in my home and an IBM server with Win Server 2008 installed. I have enabled Active Directory and set the server to have a static IP. Thats as far as I have got and I feel a little overwhelmed at the moment as I am not sure what to do next. What I eventually want to do is have the Windows 7 PC's to be able to be authenticated by the server - basically a mock up of what most large or medium sized businesses/organisations run. Sorry if I sound a bit sketchy, but I understand some things but not the whole picture, I guess I just need confirmation that I am sort of on the right track :) Also what are some good resources out there you can point me to, what are the absolute basics I need to to get started so I can further my learning?

  Read the article

• Blurred refurbished TFT

  - by PeterMmm

  I got 3 refurbished PC+TFT 19". All TFT shows a very blurry image. I estimate the TFT's are 2-3 yrs old. The PC's running Windows7 Pro. The resolution is set to the TFT native values. It could be possible that all TFT's are broken but I have similiar models that are up to 5 yrs old, without any issue. I still think it could be a config issue but from the hardware it is possible that a TFT get broken I shows up a very blurry image. Update TFT HP 2035, grafic Intel Q35/GMA 3100, analog D-SUB connector, Manuf. date Sep 2005. Config. resolution 1600x1200, PPP 150% Without ClearType it is worst. Desktop Icon titles seems to be good and clear. But in Notepad for example the effect is that on the right of the characters is a pinky shadow.

  Read the article

• windows 7 virtual wireless adapter keeps going to sleep

  - by conners

  Just a quick question that I can't see mentioned anywhere online. I have a Windows 7 box configured like these guys recommend http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/ simply so that I can have my Windows 7 box as a wifi access point or a wifi emitter. It's also called a Microsoft Virtual WiFi Miniport Adapter. But it powers off and shuts down automatically and stops working. Basically everything works as intended and then - well -it will stopped working when I am not at the Windows 7 PC for a long time. The problem seems to be that every time my PC goes to "power save / sleep" and in the morning the Windows 7 machine "wakes" but blooming heck the wifi has stopped and you have to power cycle the PC (which is very uncool). When I power Cycle I have to do the following as administrator C:\Windows\System32\netsh.exe wlan start hostednetwork I then tried a gazllion things involving services and power management and eventually discovered that if I run the following commands as administrator it will be ok (for a bit) but every 3rd ot 4th time I try this "trick" it simply fails. the trick that seems to work 3 out of 4 times (i.e. "most" of the time) C:\Windows\System32\netsh.exe wlan stop hostednetwork C:\Windows\System32\netsh.exe wlan start hostednetwork But why does this only work "some" of the time? What else I did by myself: on every manage adapter properties (that relates to the wifi) I right clicked [configure] [power management] /disabled/ "allow the computer to power off to save power" <- this made no difference Also (and this is a bit annoying) there is no system tray app/GUI for the Microsoft Virtual WiFi Miniport Adapter output signal ... none... so (lame as it sounds) the ONLY way I can check if it's on is to physically go to another device and SCAN.. lame so my question can probably be solved by any of the following: a) can I stop Windows 7 sleeping this wifi when the machine sleeps b) can I force Windows to force wake this process on wake? if so how? c) what is the service / process REALLY called and how do I restart it if it crashes d) how can I flush the wifi properly rather power cycle the host machine e) anyone have a link to an program or app that can sit in the system tray that shows windows 7 wifi hotspot emission status (on/off/etc etc) Since I am a programmer I can easily write a vbs script / windows exe to fix this (and I will share this solution) and the gui problem if I can work out the actual service that is running that netsh stops/starts

  Read the article

• How can I fix a computer that is infested with malware and is extremely unresponsive? [closed]

  - by fredley

  Possible Duplicate: How do I get rid of malicious spyware, malware, viruses or rootkits from my PC? I'm troubleshooting a Windows 7 PC for a friend. A couple of days ago it started running 'slow'. It turns out 'slow' is about 15 minutes to the first glimpse of the desktop, and another 30 to show icons. It is possible to open Task Manager, and nothing seems awry, CPU usage at 1-5%, plenty of memory free. The machine is clearly infested with malware though, in particular a program called 'Optimizer Pro' is demanding money to 'remove 5102 files slowing down my computer'. This seems highly suspicious. My problem is though, that I can't access msconfig (I left it for a couple of hours after having hopefully typed it into the Start Menu and hit enter - nothing seems to have loaded), or anything at all basically. I can boot from a Linux Live CD, but can I actually do anything useful from there? System Restore hasn't fixed it either, and Safe Mode exhibits the same behavior.

  Read the article

• X11 forwarding through SSH

  - by martinjlowm

  I have been playing around with X11 forwarding the past few hours and so far I've managed to forward my desktop pc's X Server to my laptop, using X11VNC as server and X2VNC as client. X2VNC uses Xinerama to provide a dual-screen-like behavior between my laptop and my desktop pc. It's actually really great! I know that most Linux systems run Xorg and desktop environments on TTY7. Therefore I was thinking, is it in any way possible to have the VNC-tunnel tied to it's own TTY? It would be great to be able to switch forth and back between two TTY's in order to choose which machine to manage. And I would like this approach more than using Xinerama or a GUI.

  Read the article

• background screen recording tool

  - by misha nesterenko

  I am searching for a tool that allows background recording of my pc screen. I it is nothing like a spy tool, I just need to be able to check what I was doing at the some time in the past. Small impact on the system, and relatively small size of recordings, as it is supposed to run all time pc is turned on. Some recording management as auto pruning of recordings older than x days. UPD This is not a problem if some scripting is necessary to achieve what is described in the question. So it could be a command line recording tool which could be used from batch, bash (cygwin, mingw) scripts.

  Read the article

• Windows XP: How to boot up in normal mode after improper shut down?

  - by Nick

  I work in two different locations and whenever there is a power outage at one of the locations, Windows XP detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows XP enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows XP always boots into NORMAL mode no matter how many times it is improperly shut down?

  Read the article

• I don't have a free PCI / PCI-e slot, can it be worked around?

  - by Borek

  I need to add a PCI(e) card to a nettop PC that is so small that the card won't fit there (and there is no external alternative like we're used to with external TV tuners). The only ports available are USB and eSATA, is it possible to somehow "dock" the PCI card into some device that would then connect to the PC via USB or eSATA? Or am I out of luck? (I don't mind the solution being visually ugly, I wouldn't even mind opening up the case and soldering some wires in, anything that would work would be great.)

  Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >