Search Results

Search found 9417 results on 377 pages for 'tablet pc'.

Page 126/377 | < Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >

• DIR-615 lose internet connection after 3 minutes

  - by Sirber

  I got a new DLink DIR-615 routeur. DSL model connects fine. Connected PCs connects to the internet fine (wireless, wired) fine too. After ~3 minutes, connected PCs cannot go to the internet. Web pages goes timeout, sometimes google talk stays on (working). From the router admin page, pings works correctly (on google.ca), so the connection is active. pc -- routeur -- internet: fail pc -- router: ok router -- internet: ok could it be firewall related? I've read there's a SPI firewall enabled.

  Read the article

• DIR-615 lose internet connection after 3 minutes

  - by user31375

  I got a new DLink DIR-615 routeur. DSL model connects fine. Connected PCs connects to the internet fine (wireless, wired) fine too. After ~3 minutes, connected PCs cannot go to the internet. Web pages goes timeout, sometimes google talk stays on (working). From the router admin page, pings works correctly (on google.ca), so the connection is active. pc -- routeur -- internet: fail pc -- router: ok router -- internet: ok could it be firewall related? I've read there's a SPI firewall enabled.

  Read the article

• Backup and rescue disk creation

  - by Polppan

  I am in the process of backing up my PC using "Macrium backup and restore". I have successfully backed my PC, (both C and D drive) to an external hard disk. I have a question regarding creating rescue disks. I am following the steps as mentioned in this document. If I am creating an ISO file based on the document, how it is relates to the backup I have taken to my external disk ? I see no relation between creating rescue disks and backup data or am I missing something obvious? Any insight will be highly appreciable...

  Read the article

• My D-Link Router is only allowing one connection

  - by Blaze

  My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

  Read the article

• Setting up WAMP to run on a LAN

  - by Steve

  I've installed WAMP on a Windows 7 PC, and it is running fine locally, as localhost. I want PCs on the LAN to be able to view the local server. When they load my PC's IP address in their browser, they receive a "You don't have permission to access / on this server" error. I followed this guide, but the issue remains. To recap: I've added an inbound exception to Windows Firewall for port 80 for Private and Domain connections. I've edited Apache's httpd.conf to include: Listen 80 Listen 192.168.0.5:80 < Directory "c:/wamp/www/wordpress/" allow from all < /Directory I've edited httpd-vhosts.conf to include: < VirtualHost 192.168.0.5:80 DocumentRoot "C:/wamp/www/wordpress" < /VirtualHost Any ideas?

  Read the article

• how can i realize a video-wall on 3-9pc with vlc

  - by Luca

  hello! i have to create a videowall, from 3 to 9 monitor. every monitor as a pc. actually, i stream from a server 9 movies with different istances of VLC, but i could also play on every machine the relative video with a single player. there's no problem. the real problem is that i really dont know how to sync the videos on a LAN...unfortunately there is a NETSYNC module inside VLC wich is NOT working. here are some info about my setup: videowall from 3 to 9 monitor || from 3 to 9 pc, all with the same configuration || a gigabit router+switch for the "dedicated" LAN im really stuck in this situation, if anyone has an idea or just a completely different solution, please, share it with me! thanks a lot in advance! :)

  Read the article

• Getting an boot error when starting computer

  - by Rob Avery IV

  I was in the middle of watching a movie on Netflix, then suddenly everything started crashing. First, explorer.exe closed down, then Google chrome. I had multiple things running in the background (Steam, Raptr, etc.). Individuality, each of those apps closed down also. When they did, a small dialog box popped up for each of them, one at a time, saying that it was missing a file, it couldn't run anymore, or something similar to that. It also had some jumbled up "code" with numbers and letters that I couldn't read. Ever since then, everytime I turn my computer on, it will run for a few seconds and give this error "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". No matter how many times I try to reboot it, it always gives me the same error. A day later after this happened I was able to start the computer, but before it booted, it told me that I didn't shut down the computer properly and asked how I wanted to run the OS (Run Windows in Safety Mode, Run Windows Normally, etc.). Once I logged, everything went SUPER slow and everything crashed almost instantly. The only thing I opened was Microsoft Security Essentials and only got in about two clicks before it was "Not Responding". Then, after that the whole computer froze and I had to restart it. Now, it's back to saying what it originally said, "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". I built this PC back in February 2012. Here are the specs: OS: Windows 7 Ultimate CPU: AMD 8-core GPU: Nvidia GTX Force 560 Ti RAM: 16GB Hard Drive: Hitachi Deskstar 750GB I'm usually very good taking care of my PC. I don't download anything that's not from a trusted site or source. I don't open up any spam email or such or go to any harmful websites like porn or stream movies. I am very clean with the things I do with my PC and don't do many DIFFERENT things with it. I use it pretty often especially for video games and doing homework in Eclipse. Also, good to note that I don't have any Norton or antisoftware installed. I have Microsoft Security Essentials installed but never did a scan. Thanks!

  Read the article

• What is the command to use to put your computer to sleep (not hibernate)?

  - by airrick

  I want to put my windows pc (win7) into a sleep state via command line (so i can bind to macro button on keyboard). The power button on the PC is setup to but the computer to sleep (but it's down on the floor and I'm too lazy to reach down) it exactly how I want it (sleeps using hybrid mode in case I loose power) The sleep command on the shutdown menu also works. most info I found says to use; %windir%\system32\rundll32.exe PowrProf.dll, SetSuspendState 0,1,0 But this puts the computer in hibernate mode. I do have hibernate disabled but using hybrid sleep. So, What is the command to use to put your computer to sleep (not hibernate)?

  Read the article

• Can a switch consume bandwidth?

  - by aashiq

  I have a network with a router and a switch. At first my ISP's optical fiber is connected with media converter input port. Than Ethernet cable (output port of Media converter) is connected with the switch. Then an output Ethernet cable is connected with our inner Microtik router. Then this router is connected with another LAN switch. From this switch we have got every connection other switch. It is our total network structure. Our bandwidth is 2 Mbps. From the 11th of March our MRTG graph shows high all the time even when my all switch is switched off except LAN switch. That's why our line is breaking up (Voice call). How could be it possible? My all PC's bandwidth is limited but when connected PC with media converter directly then the graph shows normal. That's why I can't blame my ISP.

  Read the article

• locally logged on a domain joined Win 7 = no authentication prompt so no printing

  - by lyngsie

  We have problems with Win 7 PC's when the user only log on locally on (a domain joined) PC, but still use the Windows printserver. Installed printers suddently stop working and seem to appear offline. In Windows XP the (logged on locally) user would be prompted to autheticate to the domain when printing, but in Windows 7 this feature seem to be faulty or not implemented. I assume the problem is a timeout on the Kerberos ticket. Of course the user has to authenticate to install the printer from the printserver, and that works fine, but in time the authenticaton stops, and no prompt appear. Any suggestions how we can "force" a prompt to authenticate like it happened in XP?

  Read the article

• Do I really need Microsoft Updates?

  - by Tony Wong

  When I install a fresh copy of Windows XP Home (I bought it from the store.. not a copy), my PC rocks like lightening speed. But when I start installing all the updates, patches & less .NET 4.0 client (as the .NET 4.0 Client seems to bring machine to slow crawl). The PC starts to slow down.. like there are more resources to watch or something is happening in the background. So could I not get away with an awesome virus protector and an awesome firewall set-up and avoid all the patches? The machine I have is a quad 4, 4 GB RAM and 2.3 GHz process. Tons of room and the machine can run several applications at one time.. but when the updates happen.. it's s-l-o-w!

  Read the article

• Port forwarding on D-Link DIR-615 super-slow, useless

  - by Jaroslav Záruba

  Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless. Accessing the router itself (admin UI) is without issues, no delay whatsoever. But when I try to access a service on another computer in the network the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine turning off firewall on the target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

  Read the article

• How can I keep gnu screen from becoming unresponsive after losing my SSH connection?

  - by Mikey

  I use a VPN tunnel to connect to my work network and then SSH to connect to my work PC running cygwin. Once logged in I can attach to a screen session and everything works great. Now, after a while, I walk away from my computer and sooner or later, the VPN tunnel times out. The SSH connection on each end eventually times out and then I eventually come back to my computer to do some work. Theoretically, this should be a simple matter of just restarting the VPN, reconnecting via SSH, and then running "screen -r -d". However apparently when the sshd daemon times out on the cygwin PC, it leaves the screen session in some kind of hung state. I can reproduce a similar hung state by clicking the close box on a cygwin bash shell window while it's running a screen session. Is there any way to get the screen session to recover once this has happened, so that I don't lose anything?

  Read the article

• Minimum Requirements for (open) Solaris?

  - by Electrons_Ahoy

  I'm thinking about knocking together a Solaris box at home to act as a combination server and learning exercise. What are the minimum hardware specs I can throw at it such that it'll be actually usable? I'd be cobbling the machine together from a stack of various x86 PC spares/leftovers. Does anyone have experience with Solaris at the lower end of the spectrum? The Sun site, for example, claims it'll run with as little as 255 megs of ram, but is it worth the exercise with less than a gig? Will my old Pentium II 450 cut the mustard? (I'm willing to throw a couple of bucks at pricewatch/mwave/newegg on this, but if I need to build a better rig than my main PC, I may not bother.)

  Read the article

• How do I share folders in Snow Leopard?

  - by thelearner

  How do I share folders on my Mac with PC users and vice versa?

  Read the article

• Big noise from Power Supply Unity Fa? Should I replace it immediately?

  - by EApubs

  Recently, I started to get a large noise from my PC when switched on. After some time, it disappears. I discovered that the issue is with the Power Supply Unit. Does this mean I have a failing PSU? Will it harm the PC if I didn't replace it immediately? Several years ago I bought a new computer casing which is very weird. Its small and compact. Normally, we have the PSU in the top. But in here, the PSU is on the bottom and right below the hard drive. Recently, two of my hard drives started to show problems. Read errors and bad sectors. Can it be the PSU and the design of the casing? Here's an image of the PSU and the hard drive :

  Read the article

• View scheduled recordings remotely

  - by Scott

  I have one computer which is equipped with a TV tuner card. The Recorded TV folder is shared so that other computers on the network can watch recordings. Now that I am upgrading my computers to Windows 7, they have Media Center, which makes for a nicer viewing experience than a Windows Explorer folder view. I have set up Media Center on my laptop to considering the Recorded TV folder on the tuner-equipped PC as an extended library location, so now I can view all the recordings from within Media Center on the laptop. To make this experience even better, is there a way to view the list of scheduled recordings on the tuner-equipped PC from within Media Center on my laptop?

  Read the article

• Getting around the FAT32 4GB file size limit

  - by Aesir

  I recently purchased a 32GB USB 3 stick that was formatted FAT32. I plugged it into my computer and attempted to copy a film onto it, the file was over 4GB however and it would not let me copy the file across because of the 4GB file size limit imposed by FAT32. After some googling I found that I could format my USB stick to have an exFAT format which would mean I could put files onto the stick greater than 4GB in size and the drive would work on both my Mac and my PC. The problem with this solution is that my PS3 cannot detect the USB stick when it is formatted with exFAT. I would like to know if there is a way I can have my USB stick formatted so it can have files greater than 4 GB and work on my PC, Mac and PS3.

  Read the article

• How do I import Outlook 2007 accounts and rules and IE usernames and stored passwords from old HD?

  - by raya

  I had an older PC running Win7 and the motherboard died on me. I've since updated my PC to another Win7 machine running a RAID 0 along with my old HDD installed as an extra drive. The problem is, I need to somehow import my Outlook email accounts (10) and rules along with my IE usernames and adjacent stored passwords for all the sites I've visited. I don't want to have to recreate the wheel for all this data. What I've found is that I have to run regedit in order to do so, but I cannot seem to boot to the old drive in order to run regedit and export the files. Can someone please help me?

  Read the article

• Chipset GPU causes a massive slowdown

  - by zyboxenterprises

  My AMD Radeon HD 7700 recently broke (fan stopped working and GPU overheated), and now I'm running on internal chipset graphics, and it causes a massive slowdown of the whole PC. I've changed the graphics memory from 32MB (minimum) to 256MB (highest), and it hasn't made any difference whatsoever. I'm using Windows Aero, and disabling it should have made a small difference, but it didn't; the whole PC is still slow. I know that it's not the computer build, because I built it myself, and it was a lot faster when it had the AMD Radeon HD 7700 in it, which is the reason why I believe it's the internal chipset graphics that are causing the problem. Is this behavior normal? I don't have the cash right now to go out and buy a new dedicated GPU. I'm using an ASRock N68C-GS FX motherboard with an AMD FX 4100 (overclocked to 4.3GHZ), with 4GB RAM. The overclock was an attempt to resolve this issue, and it isn't related to this issue that the integrated graphics is causing a slowdown.

  Read the article

• Very slow accessing printer shared from Windows Machine

  - by Tarski

  Hello, How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

  Read the article

• Translating Documents from a Foreign Language into English on my Computer?

  - by Simon

  I am aware that websites can be translated from many languages into English thanks to Google Translate. If I receive documentation via email that is in a language other than English, how straight forward is it to translate into English on my PC or Apple Mac? (indeed is Google Translate involved or is it strictly for websites) Similarly if I receive documentation via the normal postal mail service (termed "snail mail" if I'm correct) which needs to be translated into English, what steps need to be taken for this documentation to be translated effectively & quickly on my PC or Apple Mac (I am aware of the term Optical Character Recognition (OCR) software, and is this costly, or do free alternatives exist to carry out the translation process solely online? ).

  Read the article

• Problem opening password encrypted .docx file on Word 2003

  - by molecule

  Hi all, I am having a problem opening a .docx file on my Word 2003. I have installed the Compatibility pack for 2007 but when i try to open this particular file, I receive the error "Word experienced an error trying to open the file. Try these suggestions. 1. Check the file permissions for the document, 2. Make sure there is sufficient free memory and disk space, 3. Open the file with the Text Recovery converter. I do not think it is any of the errors as I am able to open it on a different PC with Word 2003 as well. I also do not have any issues opening any non-password encrypted .docx files. Has anyone experienced the same issue? Most posts on the internet relate to "open and repair" but as mentioned, I am able to open this file on another PC without any problems. Any advice is greatly appreciated. Thanks, George

  Read the article

• Problem with PPTP VPN and internet

  - by Enriquev

  Hello, I have an internet connection the following way : Internet Modem <- FireWall(not a router, a firewall) <- PC Everything is setup so my pc has an external ip address, and my firewall takes care of blocking bad stuff. I connect by VPN to an external network, so I added a new connection using Windows Xp's "New connection wizard" (the vpn client that comes with Windows XP), it's a PPTP connection so I used all default settings. I put the PPTP server's IP, my username and password and I succesfully connected. I was able to have access to the external VPN ressources. The only problem is everytime I connect to this VPN, my computer cannot connect to the web anymore, no msn, no ping, no web. Is there anything special I should be doing?

  Read the article

• Volume randomly turning itself down on Windows 7 64-bit

  - by Arda Xi

  This is the weirdest issue I've ever encountered with my PC. Every so often, my sound will start playing back at a lower volume. This happens when watching video, listening to music, all independently. It usually lasts anywhere up to a minute, after which it will turn up again. The weird thing about it is that the volume control in Windows remains at 100%, even though the volume is audibly a lot lower. (No, I'm not going deaf, it's just my PC. I checked.) I just have no idea where to go to troubleshoot this, even. I'm using Windows 7 64-bit with an on-board Realtek sound-card. Oh, just in case someone finds this question on Google or whatever, making sure this is on Do Nothing may fix your problem. Unfortunately, it did not work for me. My settings all seem fine. This is my audio slider. (Took the screenshot while the issue showed.)

  Read the article

< Previous Page | 122 123 124 125 126 127 128 129 130 131 132 133  | Next Page >