Search Results

Search found 6497 results on 260 pages for 'usb appliance'.

Page 130/260 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

  • Installing Ubuntu 12.04 on NUC intel i3 DC3217IYE

    - by Kieron
    System: NUC i3, 2 hdmi ports, ethernet, no wireless. UEFI boot 2x2gb ram 30gb mSATA internal drive Ubuntu 64bit 12.04.03 Hello i am having much trouble loading an OS on my NUC. I started out attempting another OS with various loaders (beast/hack) without much success,(various panics on boot or endless reboot loops, or graphics failures) after many tries i decided to attempt Ubuntu. Many years ago i loaded Ubuntu on an e-machine without an issue so i figured it would go smoothly, nothing could be further from the truth. The Live USB stick loads, but when i am installing the OS it always fails to load grub 2. Obviously it wont boot from SSD without grub2. I searched and found that Boot-repair should fix it...so i created a live usb with boot repair...it refuses to repair the grub because the install never finished and the needed partions are not fully created and flagged. It also demands an internet connection which i am unable to provide. I then ran gparted in an attempt to create the needed partitions manually, then re-ran boot repair turning off the "check internet" option. and disabling the re-install grub hoping it would create the missing directories and or fix the flags. it appeared to run successfully but upon return to the Ubuntu live USB it still fails at the grub2 install. also gparted doesnt have the same choices that Ubuntu install has when creating partitions, causing it to not recognize that i already had a root, or an EFI directory or it sometimes couldnt tell what the format of the partition was...all very annoying the reason i cant connect to internet (and cant upload the error logs) is the nuc only has Ethernet and the location i have to set up is too far away from modem. i can not move the monitor closer to modem as it is a 50inch LCD. I just want to do a basic install with one user acct and remote desktop (vnc) turned on so i can move the NUC to the modem connect via ethernet and then finish setting it up via Remote desktop/VNC chicken from my mac. While i await any assistance you maybe able to provide i am going to attempt to switch to the 32bit version and legacy boot to see if that can load grub. thnx again to anyone that can come up with a possible solution. i would love to hit "erase and install ubuntu" if anyone can figure out what is stopping that simple answer from working. Also disks (CD/DVD) are not an option as neither my Mac mini or my NUC have optical drives, and i have no desire to buy one for one task

    Read the article

  • Ubuntu 12.04.1 Setup doesn't detect Windows 7 partition

    - by Dom
    I'm not really that of a linux pro, more of a noob. But i can handle console operations. Well, this is my system: ASUS ZenBook Prime UX31A 256 GB ADATA MX11 SSD Intel Core i5-3317U (Ivy-Bridge) I have a fresh installation of Windows 7 Ultimate (not activated) on a 90 GB NTFS Partition on my SSD, the rest is unassigned. I want to install Ubuntu 12.04.1 from an USB Stick (no CD-Drive...) created with Universal USB Installer 1.9.1.1. However I'm not givven the option 'Install alongside Windows', and when i choose 'other' it shows that 256 GB of 256 GB are unassigned (free) Memory. os-prober gave me: /dev/sda1/:Windows 7 (loader):Windows:chain I also tried: sudo dmraid -rE and: sudo apt-get remove dmraid with no success... How can I install Ubuntu alongside Windows? Thanks very much in advance!

    Read the article

  • Noting happens when I connect my Iphone 3G to my laptop

    - by Allwar
    Hi, how do i connect my iphone to my laptop (ubuntu 10.04) so that i can sync music and be able to look at it as a usb stick? (this is what I want to do but there is a problem.) When i connect it to my laptop nothing happens, it doesn't show up as an ikon or as a mass storage device. My Iphone runs 4.2.1 it's an Iphone 3G and it's not jailbroken for the moment, is that a problem? My laptop is an Asus 1201n ubuntu 10.04 (64-bits) Bus 002 Device 005: ID 05ac:1292 Apple, Inc. iPhone 3G I connected my Ipod Video (30 gb) and that one doesn't appear as well So I'm kind of stuck now. The problem probably lies in the system, because the usb port is working. Bus 002 Device 006: ID 05ac:1209 Apple, Inc. iPod Video

    Read the article

  • Sony VAIO is booting directly into Windows without showing grub

    - by Rohan Dhruva
    I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

    Read the article

  • Install Ubuntu 13.10 in dual boot with Windows 8.1

    - by Xaxt
    I have a laptop with installed Windows 8.1 x64. I want to intstall Ubuntu 13.10 (x64 of cause) in dual boot with it. I've made bootable USB stick (using unetbootin) with Ubuntu and tried to boot with it. It boots fine, and allows me to choose language and asks whether I want to install Ubuntu or just boot it. But if I select any ot these options, it shows black screen and hangs. I've been waiting about 15 minutes for it, but nothing happened. Light of USB stick indicates that my laptop was not trying to read from it that time. I switched off EFI in BIOS, switched AHCI/SATA modes, burned ISO image to DVD and still same effect. This topic can be called a duplicated, but I have't find what it duplicates. In other topics people asked what will happen if they update Windows 8 to 8.1 having already dual boot and I have installed Windows 8.1 and want to install Ubuntu alongside with it Did I miss something?

    Read the article

  • Wireless internet connection connects but internet does not work (no packets received). Wired does.

    - by Rodney
    When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

    Read the article

  • How to connect Nexus 7 with Ubuntu

    - by gotqn
    I want to move some files from my PC to Nexus 7. The tablet is connected to my PC's USB port and it is successfully charging. Unfortunately, the PC is not detecting the devices - what I expected is to be shown the Nexus 7 tablet as external devices (like my USB flash memory). As the tablet is connected to the my home internet network, I have checked if it will appear in the "Networks" section but it does not. I am using Ubuntu 12.4 LTS. Is there a easy way to connect the devices to my PC and move some information between them?

    Read the article

  • VirtualBox 4.2.14 is now available

    - by user12611829
    The VirtualBox development team has just released version 4.2.14, and it is now available for download. This is a maintenance release for version 4.2 and contains quite a few fixes. Here is the list from the official Changelog. VMM: another TLB invalidation fix for non-present pages VMM: fixed a performance regression (4.2.8 regression; bug #11674) GUI: fixed a crash on shutdown GUI: prevent stuck keys under certain conditions on Windows hosts (bugs #2613, #6171) VRDP: fixed a rare crash on the guest screen resize VRDP: allow to change VRDP parameters (including enabling/disabling the server) if the VM is paused USB: fixed passing through devices on Mac OS X host to a VM with 2 or more virtual CPUs (bug #7462) USB: fixed hang during isochronous transfer with certain devices (4.1 regression; Windows hosts only; bug #11839) USB: properly handle orphaned URBs (bug #11207) BIOS: fixed function for returning the PCI interrupt routing table (fixes NetWare 6.x guests) BIOS: don't use the ENTER / LEAVE instructions in the BIOS as these don't work in the real mode as set up by certain guests (e.g. Plan 9 and QNX 4) DMI: allow to configure DmiChassisType (bug #11832) Storage: fixed lost writes if iSCSI is used with snapshots and asynchronous I/O (bug #11479) Storage: fixed accessing certain VHDX images created by Windows 8 (bug #11502) Storage: fixed hang when creating a snapshot using Parallels disk images (bug #9617) 3D: seamless + 3D fixes (bug #11723) 3D: version 4.2.12 was not able to read saved states of older versions under certain conditions (bug #11718) Main/Properties: don't create a guest property for non-running VMs if the property does not exist and is about to be removed (bug #11765) Main/Properties: don't forget to make new guest properties persistent after the VM was terminated (bug #11719) Main/Display: don't lose seamless regions during screen resize Main/OVF: don't crash during import if the client forgot to call Appliance::interpret() (bug #10845) Main/OVF: don't create invalid appliances by stripping the file name if the VM name is very long (bug #11814) Main/OVF: don't fail if the appliance contains multiple file references (bug #10689) Main/Metrics: fixed Solaris file descriptor leak Settings: limit depth of snapshot tree to 250 levels, as more will lead to decreased performance and may trigger crashes VBoxManage: fixed setting the parent UUID on diff images using sethdparentuuid Linux hosts: work around for not crashing as a result of automatic NUMA balancing which was introduced in Linux 3.8 (bug #11610) Windows installer: force the installation of the public certificate in background (i.e. completely prevent user interaction) if the --silent command line option is specified Windows Additions: fixed problems with partial install in the unattended case Windows Additions: fixed display glitch with the Start button in seamless mode for some themes Windows Additions: Seamless mode and auto-resize fixes Windows Additions: fixed trying to to retrieve new auto-logon credentials if current ones were not processed yet Windows Additions installer: added the /with_wddm switch to select the experimental WDDM driver by default Linux Additions: fixed setting own timed out and aborted texts in information label of the lightdm greeter Linux Additions: fixed compilation against Linux 3.2.0 Ubuntu kernels (4.2.12 regression as a side effect of the Debian kernel build fix; bug #11709) X11 Additions: reduced the CPU load of VBoxClient in drag'and'drop mode OS/2 Additions: made the mouse wheel work (bug #6793) Guest Additions: fixed problems copying and pasting between two guests on an X11 host (bug #11792) The full changelog can be found here. You can download binaries for Solaris, Linux, Windows and MacOS hosts at http://www.virtualbox.org/wiki/Downloads Technocrati Tags: Oracle Virtualization VirtualBox

    Read the article

  • Audio 2 dj soundcard configuration

    - by Jaroslav
    I have an http://www.native-instruments.com/#/en/products/dj/audio-2-dj/ The problem in settings it only sees one outpout, when there should be two(I need that for mixxx etc.) Also I want to be able set the sample rate to one of these 44.1, 48, 88.2, 96 kHz or at least check which one is set. Additionally if possible setting the latency would be an advantage. Some info: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: TraktorAudio2 [Traktor Audio 2], device 0: Traktor Audio 2 [Traktor Audio 2] Subdevices: 1/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xfdcfc000 irq 45 1 [TraktorAudio2 ]: snd-usb-caiaq - Traktor Audio 2 Native Instruments Traktor Audio 2 (usb-0000:00:1d.7-8)

    Read the article

  • Can't get Wireless RT2x00usb driver to work, and can't blacklist it

    - by TheLQ
    After a two year hiatus to Linux, I try it again out again. And then I run into to driver issues... I have an old Linksys WUSB54G v4 Wireless USB Adapter. In previous versions I had to use a combination of Ndiswrapper and Wicd to hope of getting it working. In 10.10, apparently there are built in drivers for it. Unfortunately they don't work. Fails to connect to my WPA network, fails to connect to my open unencrypted network. Wicd fails at "Obtaining IP address" or when using static IPs fails at verifying connectivity to network. Getting fed up I tried the ndiswrapper approach. Installed and configured, but still not working, even when blacklisting the rt2570 module. So for some debugging I added some lines to my /etc/modprobe.d/blacklist.conf file blacklist rt2570 blacklist prism54usb blacklist rt2x00lib blacklist rt2x00usb Restart and find this: lordquackstar@quackbeast:/etc/modprobe.d$ lsmod | grep rt2 rt2500usb 18049 0 rt2x00usb 9779 1 rt2500usb rt2x00lib 27275 2 rt2500usb,rt2x00usb led_class 2633 1 rt2x00lib mac80211 231541 2 rt2x00usb,rt2x00lib cfg80211 144470 2 rt2x00lib,mac80211 Seems to be ignored... Tried this: lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00usb ERROR: Removing 'rt2x00usb': Resource temporarily unavailable lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00lib ERROR: Removing 'rt2x00lib': Resource temporarily unavailable and couldn't connect. Restarted and was back to the same modules loading. Maybe there's something in the log: lordquackstar@quackbeast:/etc/modprobe.d$ tail -n100000 /var/log/syslog | grep rt2 Dec 13 19:01:15 quackbeast kernel: [ 23.698056] Registered led device: rt2500usb-phy0::radio Dec 13 19:01:15 quackbeast kernel: [ 23.698140] Registered led device: rt2500usb-phy0::quality Dec 13 19:01:15 quackbeast kernel: [ 23.701680] usbcore: registered new interface driver rt2500usb Dec 13 19:01:15 quackbeast NetworkManager[855]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Dec 13 19:17:47 quackbeast kernel: [ 23.521759] Registered led device: rt2500usb-phy0::radio Dec 13 19:17:47 quackbeast kernel: [ 23.521824] Registered led device: rt2500usb-phy0::quality Dec 13 19:17:47 quackbeast kernel: [ 23.524740] usbcore: registered new interface driver rt2500usb Dec 13 19:17:47 quackbeast NetworkManager[798]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Seems to be autoloading. So this means that even if I pull it out, remove the module, and get it working, it still won't work when its plugged in all the time. More info: lordquackstar@quackbeast:/etc/modprobe.d$ sudo lshw -C Network *SNIP* *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:12:17:9b:f3:1e capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=2.6.35-24-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg USB: lordquackstar@quackbeast:/etc/modprobe.d$ lsusb | grep -i rt Bus 001 Device 003: ID 13b1:000d Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB] Any suggestions on how to either fix the rt2x00usb driver or permanently block it from loading? Note that I already have ndiswrapper installed

    Read the article

  • netbook alternate installation/update

    - by user11847
    I have an Asipre One D255E netbook. Installed 9.10 sucessfully, but no internet connections to upgrade to 10.04 or 10.10. Have 10.10 alternate (couldnt get 10.04). However it says that no cd-rom present (netbook via live usb), and I directed it to sdb1 but that did not work. Could someone guide me to the steps to installation via alternate ubs only (& no internet)? The live usb's of 10.04 & 10.10 internet connections worked, but installation hanged (non alternate). Thank you greatly in advance.

    Read the article

  • Error when trying to get movies off my Camera

    - by matt wilkie
    How do I retrieve movies and audio files from my Canon PowerShot S5 IS camera? Shotwell only sees the pictures. Mounting the camera via "Places Canon Digital Camera" and then clicking twice on the resulting desktop icon yields this error: could not display "gphoto2://[usb:001,002]/" There is nothing in /media. update: output of sudo fdisk -l Disk /dev/sda: 40.0 GB, 40007761920 bytes 255 heads, 63 sectors/track, 4864 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ee33ee2 Device Boot Start End Blocks Id System /dev/sda1 2364 2612 1999872 82 Linux swap / Solaris /dev/sda2 * 1 2364 18979840 83 Linux /dev/sda3 2613 4864 18089159+ f W95 Ext'd (LBA) /dev/sda5 2613 4864 18089158+ b W95 FAT32 Partition table entries are not in disk order Solution: install gphotofs, then Nautilus shows camera contents similar to a standard usb storage device (though note that gphotofs does not yet support adding to or deleting contents).

    Read the article

  • My Ubuntu LiveUSB won't boot after formatting it on Windows XP. HELP!

    - by Bigyellow Bastion
    I formatted because the Windows XP I was using wouldn't let me view the drive in the window without formatting first, so I just said what the heck. Turns out, after using the Linux USB creator, placing the ISO on disc properly and booting, BIOS hangs; no bootloader, no startup, nothing. Windows XP's formatting screwed something up with my USB's filesystem, and I'm uncertain of what to do. Help?! My business depends on me using an OS, so prompt ideas are a must and very appreciated(no money). PS: I checked the contents of the disc, and they are all okay.

    Read the article

  • In a multidisciplinary team, how much should each member's skills overlap?

    - by spade78
    I've been working in embedded software development for this small startup and our team is pretty small: about 3-4 people. We're responsible for all engineering which involves an RF device controlled by an embedded microcontroller that connects to a PC host which runs some sort of data collection and analysis software. I have come to develop these two guidelines when I work with my colleagues: Define a clear separation of responsibilities and make sure each person's contribution to the final product doesn't overlap. Don't assume your colleagues know everything about their responsibilities. I assume there is some sort of technology that I will need to be competent at to properly interface with the work of my colleagues. The first point is pretty easy for us. I do firmware, one guy does the RF, another does the PC software, and the last does the DSP work. Nothing overlaps in terms of two people's work being mixed into the final product. For that to happen, one guy has to hand off work to another guy who will vet it and integrate it himself. The second point is the heart of my question. I've learned the hard way not to trust the knowledge of my colleagues absolutley no matter how many years experience they claim to have. At least not until they've demonstrated it to me a couple of times. So given that whenever I develop a piece of firmware, if it interfaces with some technology that I don't know then I'll try to learn it and develop a piece of test code that helps me understand what they're doing. That way if my piece of the product comes into conflict with another piece then I have some knowledge about possible causes. For example, the PC guy has started implementing his GUI's in .NET WPF (C#) and using LibUSBdotNET for USB access. So I've been learning C# and the .NET USB library that he uses and I build a little console app to help me understand how that USB library works. Now all this takes extra time and energy but I feel it's justified as it gives me a foothold to confront integration problems. Also I like learning this new stuff so I don't mind. On the other hand I can see how this can turn into a time synch for work that won't make it into the final product and may never turn into a problem. So how much experience/skills overlap do you expect in your teammates relative to your own skills? Does this issue go away as the teams get bigger and more diverse?

    Read the article

  • Keyboard freezes when xorg crashes.

    - by gsedej
    Situation is like that. Many times has happened that Xorg freezes and with it also keyboard. Quite some times because of some Compiz effects or Flash (fullscreen switch). Keyboard becomes totaly unresponsive, while mouse still works (I can move cursor, but can't click since desktop freezes) and music still plays and I can connect trough ssh. This is the only way I know I can try to solve problem - either by killing browser&flash or lastly restarting xorg server. This problem appears on more than one Ubuntu computer. My home dekstop with proprietery nvidia driver, on my work where I use noveau driever (opensource driver for geforce) and sometimes (but rarely) also on laptop with ATI graphics (using r300g driver which is really good!). Can someone explains why mouse still works while I can't input from keyboard? (I can't switch to virtual console or do R-E-I-S-U-B command) I have USB keyboard and USB mouse.

    Read the article

  • Asus Eee PC 701 4G hangs on boot

    - by Andrew
    I've got an old Eee PC 701 4G with the following specifications: 512 MB RAM 4GB SSD drive SM223AC 8GB SD card extension Screen resolution: 800 x 480 BIOS Revision 1101 (05/16/2008) EC Firmware version: EPC-079 Windows XP SP3 works fine on it, but I decided to switch my OS to Ubuntu. I have downloaded an Ubuntu 10.10 Netbook Remix ISO and wrote it to my FAT32 SD card using Universal-USB-Installer-1.8.3.3, as described on ubuntu.com During standard load from the SD card the boot process hangs up with black screen. If I'll press F6 while preloading Ubuntu, it sucessfully displays the boot menu, selecting language and showing 2 main commands: "Run ubuntu from USB drive" and "Install Ubuntu". Selecting either of these commands leading to the same result - after some background work the main loading indicator is displayed ("Ubuntu" text with dotted progress bar under it), and it's progressing forever without any effect. Is Ubuntu 10.10 compatible with my Eee PC at all? How to boot it correctly?

    Read the article

  • How to access photos from my Genius G-Shot P7545 camera?

    - by Florin
    I have a Genius G-Shot P7545 camera. In Windows I had just to plug in the camera to the usb and acces it like a usb stick. I tried to do that in Ubuntu 10.10 with no result. How can I acces the photots? With these comands I get: lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 015: ID 0784:1692 Vivitar, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xcf5acf5a Device Boot Start End Blocks Id System /dev/sda1 * 1 2550 20478976 83 Linux /dev/sda3 2550 19458 135810048 f W95 Ext'd (LBA) /dev/sda5 2550 19458 135809024 83 Linux Unable to read /dev/sdb

    Read the article

  • Preventing pop-up dialogs when connecting an MTP device

    - by DrownedSensors
    I'm using Lubuntu 14.04 with a Samsung Galaxy S3 running Android 4.3. Each time I connect my phone via USB, I get the following dialog: Unable to open MTP device '[usb:002,023]' A few moments later, I get the "Removable medium is inserted" dialog, prompting me to open in File Manager. After that, the phone is connected and fully accessible. So MTP works. The problem is that I plug in my phone to charge every time I sit down, and unplug it every time I step away. Dismissing these two dialogs every time is a pain. I would think the "Removable medium" dialog is the easier candidate. How do I tell Ubuntu to take no action and stop prompting me? For the MTP error, all the discussion I can find is for people who can't get MTP working at all. For me, it's working, but only after throwing this initial error. I've verified that my device is present in /lib/udev/rules.d/69-libmtp.rules

    Read the article

  • Ubuntu Server 13.04.3 doesn't boot w/ EFI

    - by user1004816
    I'm was actually trying to install Debian Wheezy (which failed horribly), then tried Ubuntu Server 13.04 and got the exact same problems as w/ Debian: After installing, the system doesn't show any boot-selection and tells me "Missing operating system". My setup is pretty simple: /dev/sdc - 1TB HDD (+ 3 other NTFS HDD) /dev/sdc1 - EFI, 100MiB, bootable /dev/sdc4 - ext4, 65GiB, Ubuntu/Debian (sdc2 & 3 are NTFS w/ data. Sorta lacking SATA-ports, therefore no OS-only HDD/SSD) Grub seems to be installed on /dev/sdc4, /dev/sdc1 only contains a "EFI"-folder. Not sure if thats correct. I used UNetbootin on OS X to make an 8GB USB-drive bootable and used the standard amd64-iso, running a perl-script wich eradicates a couple of naming-errors (different story). Using this tutorial and actually disabling UEFI and using legacy only dind't work either, the usb drive dind't even bother to boot. I'm pretty clueless here. I'd just like to install and use either Debian oder Ubuntu Server!

    Read the article

  • How migrate my keyring (containing ssh passprases, nautilus remote filesystem, pgp passwords) and network manager connections?

    - by con-f-use
    I changed the disk on my laptop and installed Ubuntu on the new disk. Old disk had 12.04 upgraded to 12.10 on it. Now I want to copy my old keyring with WiFi passwords, ftp passwords for nautilus and ssh key passphrases. I have the whole data from the old disk available (is now a USB disk and I did not delete the old data yet or do anything with it - I could still put it in the laptop and boot from it like nothing happened). On the new disc that is now in my laptop, I have installed 12.10 with the same password, user-id and username as on the old disk. Then I copied a few important config files from the old disk (e.g. ~/.firefox/, ~/.mozilla, ~/.skype and so on, which all worked fine... except for the key ring: The old methods of just copying ~/.gconf/... and ~/.gnome2/keyrings won't work. Did I miss something? 1. Edit: I figure one needs to copy files not located in the users home directory as well. I copied the whole old /home/confus (which is my home directory) to the fresh install to no effect. That whole copy is now reverted to the fresh install's home directory, so my /home/confus is as it was the after fresh install. 2. Edit: The folder /etc/NetworkManager/system-connections seems to be the place for WiFi passwords. Could be that /usr/share/keyrings is important as well for ssh keys - that's the only sensible thing that a search came up with: find /usr/ -name "*keyring* 3. Edit: Still no ssh and ftp passwords from the keyring. What I did: Convert old hard drive to usb drive Put new drive in the laptop and installed fresh version of 12.10 there (same uid, username and passwort) Booted from old hdd via USB and copied its /etc/NetwrokManager/system-connections, ~/.gconf/ and ~/.gnome2/keyrings, ~/.ssh over to the new disk. Confirmed that all keys on the old install work Booted from new disk Result: No passphrase for ssh keys, no ftp passwords in keyring. At least the WiFi passwords are migrated. 4. Edit: Boutny! Ending soon... 5. Edit: Keyring's now in ./local/share/keyrings/. Also interesting .gnupg

    Read the article

  • Cannot boot from live cd

    - by Sam
    I have a Hcl notebook P38 PDC, the hard disk is completely blank. I tried installing Ubuntu 11.04 as a .iso image from a cd but it did not boot. Later I tried installing it from USB using UNetbootin and also Universal USB installer but both in vain. Can someone please tell me what wrong am I doing or what else needs to be done. I am using a Toshiba pen drive 4Gb. I tried booting from the rescue mode but again had the same problem. Would be great if someone helps me out ASAP. Thank you( for reading as well as for helping).

    Read the article

  • programm and user data from an old hdd to a new installation on ssd

    - by hans wurst
    i tried everything since days, now i ask. i got a ubuntu system on my old hdd, wich is connectet via usb to this system and a sdd is build in my notebook. at the moment i am running a ubuntusystem from an usb stick. it have tried to clone my disk(cahnge uiid, etc), to transport the data via deja dup and much more. the result was nothing or strange things. my idea is to copy the important data form the old system to the new(home and whatever), but it is not allowed to do this. somebody her who know a tool wich can do this, or got an an other idea.

    Read the article

  • Can I get the Waves Maxx speaker effects to work in Ubuntu?

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Cheap sound on speakers - Dell XPS L502X

    - by Rafael
    I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • In a multidisciplicary team, how much should each member's skills overlap?

    - by spade78
    I've been working in embedded software development for this small startup and our team is pretty small: about 3-4 people. We're responsible for all engineering which involves an RF device controlled by an embedded microcontroller that connects to a PC host which runs some sort of data collection and analysis software. I have come to develop these two guidelines when I work with my colleagues: Define a clear separation of responsibilities and make sure each person's contribution to the final product doesn't overlap. Don't assume your colleagues know everything about their responsibilities. I assume there is some sort of technology that I will need to be competent at to properly interface with the work of my colleagues. The first point is pretty easy for us. I do firmware, one guy does the RF, another does the PC software, and the last does the DSP work. Nothing overlaps in terms of two people's work being mixed into the final product. For that to happen, one guy has to hand off work to another guy who will vet it and integrate it himself. The second point is the heart of my question. I've learned the hard way not to trust the knowledge of my colleagues absolutley no matter how many years experience they claim to have. At least not until they've demonstrated it to me a couple of times. So given that whenever I develop a piece of firmware, if it interfaces with some technology that I don't know then I'll try to learn it and develop a piece of test code that helps me understand what they're doing. That way if my piece of the product comes into conflict with another piece then I have some knowledge about possible causes. For example, the PC guy has started implementing his GUI's in .NET WPF (C#) and using LibUSBdotNET for USB access. So I've been learning C# and the .NET USB library that he uses and I build a little console app to help me understand how that USB library works. Now all this takes extra time and energy but I feel it's justified as it gives me a foothold to confront integration problems. Also I like learning this new stuff so I don't mind. On the other hand I can see how this can turn into a time synch for work that won't make it into the final product and may never turn into a problem. So how much experience/skills overlap do you expect in your teammates relative to your own skills? Does this issue go away as the teams get bigger and more diverse?

    Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >