Search Results

Search found 6497 results on 260 pages for 'usb appliance'.

Page 133/260 | < Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >

• Attempting to install Ubuntu 11.10 along side Windows 7 Professional 64bit. Installer doesn't recognize an operating system present

  - by KichigaiDave

  System Details: Asus Sabertooth 990FX motherboard AMD FX-8120 CPU 16 GB DDR3 1600 Corsair Vengance RAM (4x4) EVGA Nvidia GTX-560Ti video card 2x Dvd/cd rw dirves 1 Bluray RW drive 1 Orico USB 3.0 & eSata panel 1 Sabrent floppy bay card reader w/USB 2.0 port 760W pc power & cooling PS OCZ agility 120GB SSD (Windows 7 Professional 64bit installed in an approx 80gb partition, NTFS. There is also a "System Reserved" partition shown in disk management at 100mb in size, also NTFS) That leaves about 32GB usable free, un-partitioned space in which I hoped to install Ubuntu. However when I run the Ubuntu 11.10 AMD64 installer, it doesn't show there is even an operating system installed. It just shows the entire drive as free-unpartitioned space. Just not sure what to do here. I was thinking about using the Wubi installer, but i don't know about that. Is the performance reduction pretty drastic? Thanks,

  Read the article

• I can't use my iPod touch (32GB)

  - by Silambarasan

  Hi All.. I have connected my ipod touch 32gb in my ubuntu 10.10 os.It's connected on os and shows in desktop. but it's not showing as a device in Rhythmbox music player. and also I can't open directly like folder or drive or usb device. when I try to open it show this Error: Could not display "gphoto2://[usb:001,003]/". Error: DBus error org.freedesktop.DBus.Error.ServiceUnknown: The name :1.207 was not provided by any .service files Please select another viewer and try again. Any solution for this problem?

  Read the article

• ubuntu 14.04 slow

  - by TURN A

  so i upgraded to ubuntu 14.04 from 12.04 with a usb but i have internet ,my computer is really slow at 1024x768 definition ,everything works super slow ,windows closing and opening and streaming videos ,everything ive used so far.but it works fine at 800x600 definition ,i want it to be fine at the higher definition ,how do i make it run well at 1024x768 ? in additional drivers nothing shows ,and my computer mirrors by default for some reason ,i tried stopping it from mirroring but most buttons dont want to work and weird glitches happen ,the system doesnt work well when not mirroring , i dont care if it mirrors or not i just want good performance .thank you in advance for any answers !! here are the computer specs Processor 1.8 GHz 8032 RAM 2 GB DDR3 Memory Speed 1066 MHz Hard Drive 32 GB Graphics Coprocessor Graphics Media Accelerator HD Wireless Type 802.11B, 802.11G, 802.11n Number of USB 2.0 Ports 4 Expand Other Technical Details Brand Name Asus Item model number EB1030-B003L Hardware Platform Linux Operating System Ubuntu Item Weight 1.5 pounds Item Dimensions L x W x H 1.14 x 6.70 x 8.60 inches Color Black Processor Brand Intel Processor Count 1 Computer Memory Type DDR3 SDRAM Flash Memory Size 32 Hard Drive Interface Solid State Optical Drive Type No

  Read the article

• Samsung series 9 np900x4c-a03us Dual boot windows 7

  - by rowntreerob

  how do i get USB install of 12.04 installed? how do i change the BIOS? how do i partition the disk for dual boot? Web instructions for USB ISO bootable image were confusing. Series 9 has new, UEFI compatible BIOS - there is a gotcha involving "fast BIOS Mode" The native windows install included 2 partitions that were hard to get rid of: 21GB NTFS for "Samsung-rec" ... recovery 8GB for Hibernation both of the above were hard to get rid of in windows.

  Read the article

• How can I install Ubuntu alongside Fedora?

  - by user285248

  I am currently running Fedora and would like to duel boot with Ubuntu. I do not want to replace Fedora, I would like to keep it as my main OS. However, when using the Ubuntu installer I only get the option to either: "Replace Fedora release 20 (Heisenbug) with Ubuntu" or "Something else" Is there I way I can install ubuntu alongside Fedora without deleting it? If so, as I would like fedora to be my main OS, is there also a way to make it the top grub option? I have tried partitioning with gparted however I can't split the fedora partition, it says it is all used however I have only used about 100/500GB. I am trying to install ubuntu 13.10 off a live USB stick, I will upgrade to 14.04 when I install it but don't want to make a new live USB.

  Read the article

• The system is running in low graphics mode error before ubuntu gets installed

  - by hellodear

  I am using Bootable USB for installing Ubuntu with Windows 8.1. I have put pendrive and then booting my USB. When it shows me to try Ubuntu or install Ubuntu. Then I press Try ubuntu and then it says" "The system is running in low graphics mode". Then I press Ok. Then it shows 4 options. Then again I click Ok. Then it shows a black screen and nothing happens. I have tried all possible answers provided in AU. What should I do? Please help. I am using Windows 8.1 with dedicated graphic card (Video card - AMD Radeon HD 8670M). Installing 12.04 LTS with pre-installe Windows 8.1 in a Dell Laptop 3537 inspiron.

  Read the article

• stuck in busybox after update

  - by Lyra500

  I should start out by saying that I am not very tech savvy and have done my best to understand what is going on here from reading other people's posts and have fumbled my way through several attempted fixes without getting anywhere... I run ubuntu 12.04 on an admittedly cheap laptop from ebuyer and in spite of being cheap and not a brand laptop I have never had any major problems with it. Since updating to 12.04 when it was released the boot-up process has always been slow. Logging in takes about 30secs longer than it used to and if I closed my laptop and opened it again instead of being met with a login screen I'd be met with a black screen with a white mouse. As all of these problems had a behavior-changing fix (don't close laptop, patiently wait for login, etc.) I didn't think of reporting any of the issues. Last night when the update manager prompted me that there were updates available I duly did them as I usually do. At the time a bug report came up and I cannot remember what it said but I reported the bug as I was prompted to do. Then this morning when I started up my laptop it went through the usual sequence, GRUB, purple screen with 'ubuntu' etc. and then when it tried to boot up it went into BusyBox and I have not been able to do anything to solve this. I have tried going into the GRUB menu and starting previous versions but I come to the same point - busybox. I have borrowed another rather elderly laptop with Windows Vista to try and download Boot Repair and Ubuntu and burn them onto CD. I tried downloading boot repair five times, to laptop, CD and USB. Every time it would download and burn fine but then the windows laptop would tell me that 1% did not download properly and my laptop would not run the USB or CD upon booting. I then tried to download ubuntu and make a livecd, twice, but again was told that 1% did not download properly and again my laptop will not run ubuntu from the CD upon booting even if/when I went into the f2 menu and changed the menu priority (if that's what you call it) for booting up to make sure it was definitely trying the USB/CD first. This is the message I get from busybox: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands I have tried 'exit' but it mentions things about 'kernal panic' and 'tried to quit init!' and 'can't find /root/dev/console : no such file'. I know that the problem is probably caused by a problem with a kernal caused by the update last night, but I couldn't honestly tell you exactly what was updated and without being able to boot from a livecd I'm not sure how to go about fixing this. As I said, I am not tech savvy and have done what I can to try and find a solution to the problem but I'm starting to feel like I'm out of options. Does anyone have any ideas?

  Read the article

• External Storage: The Apricorn Aegis Padlock Review

  Mix hardware encryption and a numeric keypad with a portable USB external hard drive and you get secure business files wherever you roam.

  Read the article

• install 64 bit as dual boot with 32 bit

  - by profgeorgefhart

  I downloaded Ubuntu 12.10 - bit .iso onto a bootable USB and want to put it on to my 32 bit 12.10 system as a dual boot, using a totally separate 1 Tb disk [which already has data on it]. However, when I go to restart and hit F8 fir BIOS set-up, I can change all the settings except the boot search order. Is there some other way to force the startup to read the USB first? Is the fact that I cannot change the search order to do with the fact that the 32 bit OS was 'Installed in legacy mode' not 'EFI? How can I rectify this? (This might be related -- might I need to update my BIOS for my Intel DX38BT motherboard? I think their last upgrade was 2009.)

  Read the article

• 12.04: I need a new network card - and I think this one may work?

  - by Jason Malone

  I found this list of compatible USB wireless network adaptors: http://www.cyberciti.biz/tips/linux-usb-wireless-compatibility-adapter-list.html Listed here is the Belkin F5D8053. I'm looking for a store to buy a suitable adaptor in locally and I can't find that particular adaptor - but I can see a Belkin F7D4101az. I think this is simply a newer model - but a Google search for "ubuntu belkin f7d4101az" brings no results - not even people trying to get it to work. Nothing. So I didn't want to purchase it without being sure. There's really only one PC shop that sells this sort of stuff around here - so here's a list of all my available options: http://www.pcworld.co.uk/gbuk/wireless-cards-adapters/xx_7088_70095_xx_xx/xx-criteria.html I'd really like to get one today, because I have a lot of work to do and don't really want to have to wait a week for a new adaptor - I spent 6 or 7 hours last night trying to get my Dell 1450 to work with no luck. Any help would be much appreciated.

  Read the article

• 12.04 install now just blank screen

  - by bull

  I have attempted to install a new copy of 12.04 using usb stick instead of using download manager. Everything went fine while using usb stick until I restarted after installation was complete. Then, I got the screen with cursor and 4 lines of script with the first line saying "could not write to bytes: broken pipes". I have used several versions of Ubuntu from 6.04, but this one seems broken. I have tried nouveau.blacklist and many other suggestions to no luck. I am using hp pavilion m7790y dual core processor system, with nvidia 7600gt video card, 4gb ram and two hard drives with Vista on one and fresh install of Ubuntu 12.04 on other. I'm still looking for help to solve this problem. Thanks in advance.

  Read the article

• No Mouse Pointer - ubuntu 13.10

  - by Paul

  just installed 13.10 on my HP Envy M6 laptop and have no mouse pointer. My USB mouse does not work and neither does the track pad. When I booted from a USB key everything worked OK but once installed it seems to have broken the mouse. Unlike other posts, there is no flicker, it simply doesn't work at all. My laptop is an i5 with 6gb and dual Intel and AMD radeon graphics. Any help would be gratefully received as I really can't stand Windows 8 any longer. Thanks.

  Read the article

• Ubuntu 14.04 crashes after several seconds

  - by AndrewJoyce86

  I just installed Ubuntu on my Compaq desktop and everything seemed to go well. The desktop appeared just like it should... Only then this happens, seconds later: Crash Something tells me that this is not supposed to be happening. I did not partition, I replaced Windows 7 with Ubuntu. When I try to run off the USB stick I used, I get this: USB So, what do I do, now? Should I try to reinstall? Is the ISO bad, somehow? System specs: Compaq Model CQ5205Y AMD Semperon LE-1300 2 GB RAM 250 GB HDD

  Read the article

• Weird mouse/keyboard freezups when using PowerPoint 2007 with IBM/Lenovo docking station

  - by DanM

  I'm not sure what part of my system is responsible for this, but when using PowerPoint, I have problems when trying to resize drawing objects. I'll be dragging the handle and suddenly, the object will deselect and whatever is behind the object will select and start moving around. Next thing I know, the keyboard won't type anymore, and the only way to fix it is to unplug the USB and plug it back in. In case it's hardware related, I'm using an IMB Thinkpad T60P in a docking station. My keyboard is a Microsoft Natural Keyboard Pro. My OS is Windows XP SP3. I've never noticed this happening in anything besides PowerPoint, and I don't know anyone else who has this problem (even people with similar setups). Any ideas what it could be? Edit Well, it looks like I only get the problem if I plug the mouse into my docking station's USB. If I plug directly into the laptop's USB, everything works fine. And, again, this problem is only with PowerPoint. I tried playing with some drawing objects in Word and had no issue no matter where my mouse was plugged in. I should also mention I tried a different mouse (a standard Microsoft corded mouse instead of my Logitech trackball), but that made no difference. So, I don't think it's anything specific with the trackball or the trackball's driver. I tried searching Google but came up empty, so I'm guessing this problem is something unique to my setup. If you have any thoughts or ideas to try, I'd love to hear them.

  Read the article

• Installing Linux on an Asus p8z68-m PRO Motherboard

  - by Holland

  Here is a challenge: how is this done? I've tried disabling the ASM1061 controller in the Onboard Devices section, using Wubi, booting from USB (as I don't have a DVD drive, yet), and even booting from RAID/IDE (with AHCI as the default) to do this. Still, no dice. Google shows up virtually nothing related about Linux and this mobo, apart from a people just saying "disable ASMedia" (which, I assume is the ASM1061 controller, as that's all I see - apart from the USB 3.0, which I disabled already) and it hasn't really helped much. Thus, what is wrong here? Edit My problem is that I cannot boot Linux via USB or a simple Windows installer such as Wubi (for Ubuntu). I wind up getting error messages along the lines of write cache failed, along with many other cryptic error messages similar to the following: [ 1400.351374] sd 4:0:0:0: [sdb] Test WP failed, assume Write Enabled [ 1400.353433] sd 4:0:0:0: [sdb] Asking for cache data failed [ 1400.356601] sd 4:0:0:0: [sdb] Assuming drive cache: write through This seems to be common for Asus P8Z68-M Pro motherboards, with the only notable solution being to "disable ASMedia", which, as I said before, I'm guessing is the ASM1061 controller on the motherboard. Despite already disabling this, I have tried this with both Fedora and Ubuntu without any success. I need to know what I can do about this; has anyone ran into something similar or heard about this issue before? I know these motherboards are relatively new...

  Read the article

• Are there any wireless webcams/cameras that Windows will recognize as a capture device?

  - by Keithius

  I'd like to have a webcam in a different room from my computer, and the distance means USB is out of the question. I know there are many wireless cameras, but what I can't seem to find out is if any of them would be recognized by Windows as a capture device (just like a locally connected USB webcam). Most of the wireless cameras I can find (e.g., D-Link DCS920; Cisco-Linksys WVC54GCA, etc.) can all stream video directly from the camera itself, which is fine if you're using the camera as a "security" camera (for private use only), but not for other uses (say, sending the video to an online video streaming service, e.g., Ustream). It seems like this should be possible; after all, wireless (WiFi) printers with scanners are recognized by Windows. Are there any wireless (WiFi) cameras out there that would be recognized by Windows as a capture device in the same way as a USB webcam would? Alternatively, a camera that's not wireless (e.g., connects via Ethernet) would do the trick too - but I imagine if anyone is going to make a remote camera like this, they'd go the extra step and make it wireless, too.

  Read the article

• Any way to move Office Starter To-Go to a non-flash drive?

  - by Scott Bussinger

  Microsoft's Office Starter edition has an interesting option to create a portable version on a USB flash drive using the "Microsoft Office Starter To-Go Device Manager". This creates a portable version of the Word and Excel starter editions (limited versions of the normal applications that include ads). This would be great for use in Virtual Machines since it requires no registration and has a perpetual license. But I want to copy the files off of the flash drive and just store them in the VHD. The problem is that it appears when you try to run the office.exe executable from anywhere but the USB drive you get the error "Microsoft Office Starter To-Go cannot be launched because it is installed on an unsupported device." Any ideas what it is objecting to and is there a legal workaround for this? A limited but legal and portable version of Word and Excel is a great idea. But tying it specifically to a USB flash drive seems a bit odd. They don't seem to care how many of those flash drives you create so it's not clear what the restrictions are about.

  Read the article

• Linux Mounting Problem

  - by Sam

  I have an Iomega Network Attached Storage device on my Windows network. I am trying to use a clonezilla live USB flash drive to backup my netbook to my Iomega Network Attached Storage device. The clonezilla USB flash drive runs linux. I'm having trouble getting the Network Attached Storage unit to mount using the following command: mount -t cifs -o username="myUsername" //192.168.1.100/backup /home/partimg The response from linux is: [134.730738] CIFS VFS: cifs_mount failed w/return code = -6 retrying with upper case share name [134.788461] CIFS VFS: cifs_mount failed w/return code = -6 mount error(6): No such device or address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I also tried adding the following to my username: username="myUsername,domain=workgroup" but that did not change the error. I am able to ping the network attached storage unit from linux on my netbook. I also booted from a Slax Live USB Flash Drive and Slax auto-mounted my network attached storage unit via Samba. Unfortunately, I don't believe that I can run clonezilla from inside the Slax installation. Does anyone have any insight about what is wrong with my mount statement? Or is there something peculiar about Iomega drives which makes this impossible?

  Read the article

• Static noise in headphones

  - by John Murdoch

  I have a Asus P6T based system. I was using the on-board sound (plugging in Logitech X-230 2.1 analog speakers in the green "front speakers" 3.5mm analog output, then plugging in my headphones in that). I was quite happy with the sound quality (didn't hear any static noise if volume was turned down to my normal listening level). Then about a week ago I started having terrible static noise from the left channel, and no normal audio on that left channel. Right channel had more static noise than usual but did have a bit of sound. I tried using the AC'97 in front of my case but that seemed to have no signal. I decided my on-board sound card has gone bad and bought an internal sound card to replace it (Startech 7.1Ch PCI). This fixed the "no sound from left channel problem", but I had much more audible static noise. I decided the card was low quality and/or it had interference from all the other things happening inside the computer case, and bought a Sweex SC016 external USB sound card. But even with that I have static noise in headphones. Positioning the USB sound card differently doesn't seem to help. Trying the other analog outputs (e.g., surround) doesn't help. The static noise in all cases is proportional to the volume. I have tried different headphones, but the situation is situation though perhaps the flavour of the static noise changes slightly. So what are my options? a) Get another, more expensive, external USB sound card hoping the quality will improve? b) Get another, more expensive, internal sound card (PCIe 1x perhaps) hoping the quality will improve? c) Get a dedicated DAC box? d) Get some Hi-Fi earphones? Suggestions? tl;dr - Two different sound cards both still have static noise in headphones.

  Read the article

• Convert a cassette tape recording to digital format

  - by Electric Automation

  Has anyone been successful with transferring audio cassette tape recordings to a digital format? I would like to preserve old cassette tape recordings of my grandparents to some digital format: MP3, WAV, etc... The quality of the tapes are mediocre. I think I can handle the quality restoration but getting the audio from tape to digital is my question. Below is a list of the hardware that I can work with: Cassette Deck: I have a Technics stereo cassette deck model RS-B12. It has separate left and right IN and OUT RCA type jacks on the back. In the front it has a headphone phono jack, plus left and right mic input phono jacks. On the computer side: -I have a Windows Vista PC with no additional software other than what came with the machine from Costco. No sound editing software that I can see. There is no sound card on the PC. On the front panel there is a mini-phono mic input jack and there are several different types of in/out mini-phono jacks on the back. In addition, USB and Firewire. I also have access to a new (2009) iMac with a mini-phono input jack for a powered mic or other audio source and GarageBand that has come with the computer. In addition, USB and Firewire. What are my options for getting these cassette recordings into a digital format? Whats the best format? What sort of wires would I need and will I want to utilize the USB or Firewire or can I simply use the audio inputs on the PC (or Mac) to receive the audio stream?

  Read the article

• No audio in my ubuntu system

  - by hap497

  Hi, I am running ubuntu 9.10. But there is no sound in my environment. When I go to System-Preference, there is no 'sound' entry there. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: I82801AAICH [Intel 82801AA-ICH], device 0: Intel ICH [Intel 82801AA-ICH] Subdevices: 1/1 Subdevice #0: subdevice #0 $ lsmod Module Size Used by usb_storage 52576 3 binfmt_misc 8356 1 vboxvfs 34620 0 vboxvideo 1884 1 drm 159584 2 vboxvideo agpgart 34988 1 drm snd_intel8x0 30168 2 snd_ac97_codec 101216 1 snd_intel8x0 ac97_bus 1532 1 snd_ac97_codec snd_pcm_oss 37920 0 snd_mixer_oss 16028 1 snd_pcm_oss snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 2656 0 snd_seq_oss 28576 0 iptable_filter 3100 0 snd_seq_midi 6432 0 ip_tables 11692 1 iptable_filter x_tables 16544 1 ip_tables snd_rawmidi 22208 1 snd_seq_midi snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi ppdev 6688 0 snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event snd_timer 22276 2 snd_pcm,snd_seq snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq psmouse 56500 0 serio_raw 5280 0 snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_ti mer,snd_seq_device i2c_piix4 9932 0 parport_pc 31940 0 soundcore 7264 1 snd snd_page_alloc 9156 2 snd_intel8x0,snd_pcm vboxguest 143836 7 vboxvfs lp 8964 0 parport 35340 3 ppdev,parport_pc,lp pcnet32 32644 0 mii 5212 1 pcnet32 floppy 54916 0 ~:987:2$ lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter 00:03.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 40) 00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service 00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01) 00:06.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 0 00:0b.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller ~:988:3$

  Read the article

• Convert a cassette tape recording to digital format

  - by Optimal Solutions

  Has anyone been successful with transferring audio cassette tape recordings to a digital format? I would like to preserve old cassette tape recordings of my grandparents to some digital format: MP3, WAV, etc... The quality of the tapes are mediocre. I think I can handle the quality restoration but getting the audio from tape to digital is my question. Below is a list of the hardware that I can work with: Cassette Deck: I have a Technics stereo cassette deck model RS-B12. It has separate left and right IN and OUT RCA type jacks on the back. In the front it has a headphone phono jack, plus left and right mic input phono jacks. On the computer side: -I have a Windows Vista PC with no additional software other than what came with the machine from Costco. No sound editing software that I can see. There is no sound card on the PC. On the front panel there is a mini-phono mic input jack and there are several different types of in/out mini-phono jacks on the back. In addition, USB and Firewire. I also have access to a new (2009) iMac with a mini-phono input jack for a powered mic or other audio source and GarageBand that has come with the computer. In addition, USB and Firewire. What are my options for getting these cassette recordings into a digital format? Whats the best format? What sort of wires would I need and will I want to utilize the USB or Firewire or can I simply use the audio inputs on the PC (or Mac) to receive the audio stream?

  Read the article

• Hard drive spark, can it be recovered?

  - by user163558

  Alright, so I was going to install Source Film Maker but I didn't have any space, so I decided to connect an HDD via an USB converter(image below). I shut down the machine, turned the PSU off, and connected via a Molex connector & the USB converter. I turned back on the PSU, no sparks or anything, everything normal, but when I turned on the machine, I heard some sizzing(lol?) and sparks flying and a little flame, but the PC was running fine. I pressed the power button instead pulling out the plug (I panicked) so it continued to short circuit for about 10 seconds. There's a very little part on the HDD that become ash, it's near the Molex connector and the circuit is a little black as well. I'm afraid that I will damage the HDD more so I didn't hook up the HDD after all. Do you think it's the PSU(came default with Cooler Master Elite 430, 500W) or it's the HDD(Samsung SP1203N)? P.S: I've attached the HDD same way before(like 3 months ago), and it worked. HDD burn: USB connector: Sorry for the bad image quality, taken with my phone.

  Read the article

• Windows XP Boot Issue - Diagnosing A Hard Drive Failure

  - by duffymo

  My five-year-old HP desktop running Windows XP SP3 wouldn't boot from the hard drive yesterday afternoon. I would see the boot sequence begin, then nothing but a black screen. Fortunately, I had just done an Acronis backup to my external drive in the morning, and I have a bootable USB key. I put the USB key into the drive, powered up the machine, and put the USB key first in line in the boot sequence. Voila! My machine came alive. But now I'm confused as to what the problem is and what to do next. I assumed that my hard drive was toast. But now that the machine is alive I can see files on my C: drive that have changes I made just yesterday. Clearly the drive is not dead. Here are my questions: What could explain my inability to boot from the hard drive? What would a remedy be? What's my best course of action? Should I replace the hard drive with a new one? If I replace the hard drive, do I reinstall the OS and apply the backup I did yesterday? If I decide that re-installing Windows XP makes no sense, how do I get back the Acronis backup that I did yesterday? I don't want to lose that. UPDATE: I just learned one more key fact. I'm having some work done on my house. I neglected to shut my machine down before the contractor came. My wife said he shut down the power to do some work on a circuit and then powered the house back up. I have a surge protector, but is it possible that cycling the power did some damage?

  Read the article

• My PC is powercycling, what's going wrong?

  - by Renai

  So here is my sorry story of woe. My PC has been functioning normally for some time. Last week I bought a cheapish powered USB hub and plugged it into my home PC, which runs Windows 7. This weekend I plugged that hub into my home PC. At some stage I hibernated the PC. Then later on I plugged my Kobo eReader into the hub to charge. Later on I started the PC up. Only thing is, it now won’t start up. It just powercycles on for a second and a half with the fans at full, then powercycles off. Then back on for two seconds, then back off. There’s no display at all and it won’t get to the BIOS screen. It looks like anything USB is not functioning — the keyboard and mouse are not lighting up etc. I’ve taken out the BIOS battery and reseated the RAM, reseated the graphics card and so on, but my suspicion is that I have blown the USB section of the motherboard somehow. Suggestions? All else failing, where is the best place to take this machine in Sydney to get evaluated? It’s a fairly powerful beast, all up has cost me about $2500 over the years, including upgrades and a recent new graphics card, so can’t just start from scratch.

  Read the article

< Previous Page | 129 130 131 132 133 134 135 136 137 138 139 140  | Next Page >