Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 130/391 | < Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >

  • Unexpected network traffic?

    - by robwalker
    My internet connection is via a fixed wireless connection using a 900MHz Motorola Canopy module. The router reports a fairly consistent 32-64Kbps of incoming traffic on the WAN port. When I attached a PC directly to the port and run Wireshark, I get a dump showing a lot of chatter from other machines that I presume are connected to the same tower. This didn't include end-to-end traffic, but was there were a lot of ARP requests, SSDP traffic, ICMP and other network discovery type stuff. Is this 'normal' or does it suggest a misconfiguration somewhere? As far as I can tell there is no need for my modem to be receiving any of this traffic (other than wanting to know what the names of my neighbours machines and printers are!) Since the internet connection is slow at the best of time, having this amount of background noise seems very wasteful.

    Read the article

  • Wpa supplicant suddenly stopped working

    - by Grzenio
    Hi, Recently my wireless stopped working on my Debian testing system. It just doesn't connect. The best I get (only after a reboot) is that it says it did connect, but failed to get IP address. But usually it just tries to connect, disconnects straight away, connects again etc. so it never manages to associate correctly. I am sure it did work about a month ago, stopped working after recent upgrades from the repository. Any ideas how to find the issue and fix it?

    Read the article

  • As a student looking for hands-on experience, how should I configure my test lab to accurately reflect a business setting?

    - by Moe
    I'm one class away from my BA IT, I took several classes in general IT. Out of all the books I found just two to be really beneficial, so I'm trying to get the hands on experience. I want to build a small test network that has both wireless and also wired clients, a printer, a laptop, a desktop, and server (I have 2x 1TB drives of data that I want to be available to all computers). What should I do to configure these in a way that will reflect how a small business might be set up, so that I can work towards some meaningful experience.

    Read the article

  • Web browsing is fast, but downloads are slow

    - by Ricket
    I work for a company on my university's campus, helping with general IT problems and some web development. But lately there has been a problem that has me and my boss completely stumped. We, plus one contractor, make up the entire IT department, so I'm reaching out to you for help. All around the office, we have wall jacks. These collect in a closet down the hall and all plug into a switch. This switch, along with our individual server jacks, plugs into another switch, and that switch plugs into our firewall hardware. Then the firewall is connected out to our campus network. Our campus internet is, well, very fast. I don't know exactly the terms, tiers, etc., but we have thousands of students and downloads can run as fast as 10 MB/s at night; uploads are sometimes even faster. I think we're practically ISP level. In short, I have a lot of faith that it is not the campus side of things that is causing a problem, combined with other evidence I'll mention in a moment. So our symptoms: web browsing is fast. Web pages, images, etc. load instantly. No problems there. But then when I go to download something, the download starts fast but very quickly (a matter of seconds) drops to nearly 0. Often it will actually drop to 0 and time out. This happens with even very small files, 1 MB or less. It smells to me like a QoS sort of thing. I'm not entirely sure, and I wanted to get your opinions first. My boss is hesitant to touch our firewall, much less let me touch it, and it was set up and is managed by a consultant remotely. These problems don't seem tied to a time of the day. I've tried downloads after 5:00 and still the same thing happens. From my desk, I can turn on my wireless adapter and pick up the campus wireless access point. If I unplug ethernet and connect to it, downloads are fast. This adds to my suspicion that it's limited to our company network. Also, a number of weeks ago the consultant upgraded our firewall firmware. Suddenly everything was very fast. I tested with downloads from Sun and speedtest.net and things were blazing fast, as they should be with our campus internet! It was wonderful, and I figured the slow speeds were an old firmware bug. In a matter of days, things steadily declined until they were back to the old symptoms. Oh, and we have antivirus installed on every computer, and we keep it up to date. Though I suppose the possibility is still there that someone could have spyware which is bogging down our internet, in which case what is the easiest/best way to find this out? (maybe this should go in a separate question) Thank you for your patience in reading all of this. Do you have any ideas as to what I can try? Is this something that you've experienced before? What sort of tools or methods can I use to try and diagnose the problem? P.S. everything here is Windows. Windows Server 2003 and 2008 on our servers, and Windows XP on employees' machines. Update: We are submitting a ticket to the university to just take a look and see if they see anything unusual and/or can suggestion methods for us to try and pinpoint our problem. Hopefully they'll be helpful! I'll update this to let you know what goes on. Update again: We found a hub (yes, a HUB) right between our campus connection and our firewall. It had only those two ethernet cables plugged into it, nothing else. After removing the hub, our speeds have jumped up to several mbps. However in talking with the campus, we got them to run a gigabit line to our firewall in place of the 100mbps line. As of friday, we are at about 65 mbps up and down (according to speedtest.net at 8am)!! Go NC State!!

    Read the article

  • Disabling networkmanager for a specific interface

    - by bdonlan
    I'd like to do some experimentation with hostap without disabling my primary wireless interface. How do I tell networkmanager to keep its hands off a specific interface or interfaces while allowing it to continue managing all other interfaces normally? I'm using Ubuntu 9.04. (Wasn't sure if this should go on superuser or serverfault, as networkmanager isn't much of a 'server' tool - if it belongs on serverfault please feel free to move it) Edit: I've tried adding this to /etc/network/interfaces: allow-hotplug wlan2 iface wlan2 inet static address 192.168.49.1 netmask 255.255.255.0 But this has no apparent effect, even after restarting NetworkManager. Here's my /etc/NetworkManager/nm-system-settings.conf: [main] plugins=ifupdown,keyfile [ifupdown] managed=false Edit[2]: Looks like I needed to restart nm-system-settings, then NetworkManager.

    Read the article

  • Why is my connection to Playstation Network so unreliable? [closed]

    - by jammus
    Hello friends. I'm 28 and my girlfriend is 24. Our home internet connection is pretty reliable, it's almost always up and can get fairly high download speeds. However, my experience with the Playstation Network is pretty frustrating. I'm always getting kicked off or getting quite high latency. Are there any tips or tricks that you might help my on-line gaming run more smoothly? I'm using a wireless connection for the PS3, is this likely to affect things?

    Read the article

  • Prevent users from Router 2 seeing Router 1 computers

    - by Patrick Robert Shea O'Connor
    I've got 2 Netgear N300 (WNR2000v3) routers. Here's my setup: Modem Router 1 Private Users/Router 2 Public Wireless Users on "Guest" Network. I want to prevent users who are connected to Router 2's "Guest" network from accessing anything that is connected to Router 1. There is an option when setting up the "Guest" network called "Allow guest to access My Local Network" which I thought if unchecked would do this very thing; however, I can still access files and such of computers connected to Router 1. Router 1 assigns 192.0.0.x IP addresses, Router 2 assigns 10.0.0.x IP addresses, how can they even see each other? Do I need to change the subnet or something else?

    Read the article

  • Presentation software requires admin rights to install - any way to remove this requirement?

    - by James F
    I have some wireless presentation software which I use in a meeting room in order to allow end users to hold presentations here and wirelessly have their laptop screens showing on the TV on the wall. Unfortunately the .exe file requires admin rights to install therefore requiring that either the user requests temporary admin rights beforehand, I install it using my admin account or that we use a VGA/HDMI cable. Is there a way to remove the admin right requirement from a .exe or a .msi file so that it can be installed freely by any user? We are using XP for now but will be moving to 7 soon. Thanks James

    Read the article

  • Music Streaming Devices

    - by Skizz
    I'm looking for peoples opinion on wireless music streaming devices - something like this. I have an iTunes library hosted on an ubuntu server and I'm looking for something to allow me to listen to all the albums stored on it. Ideally, it should provide a good quality playback both over headphones and through speakers so that everyone can hear it. It doesn't need to be ultra-portable - being able to move the system and plug in a mains lead should be enough, so a single, integrated unit is preferable. One product per answer please and if you've used a product, vote it up or down depending on whether it's any good or not. Use comments to highlight good/bad points.

    Read the article

  • Speeding up Connection Between Computer and Wireless/Bridged Router

    - by Justian Meyer
    Hey everyone, I looked through other questions, but didn't find useful responses. Our main computer has a dl speed of 6 Mbps, but some of our other computers are getting only 40-200 Kb! The router is wireless, but all computers are connected using a Netgear Wall-Plugged Bridge XE102, which transmits information via the building's powerline. It can't be the hardware itself, however, because some computers still manage decent speeds. The computers afflicted are running on Microsoft XP Service Packs 2 and 3, but so are computers that are totally functional. These speeds severely impede on productivity and are excruciatingly frustrating when trying to cram in time in the early hours. Could it be an issue with the computer? Location? Router? Many thanks in advance, Justian

    Read the article

  • No Internet access while being connected to VPN using Cisco VPN Client 5.

    - by szeldon
    Hi, I have an access to corporate VPN using Cisco VPN Client 5.0.00:0340, but when I'm connected to it, I don't have an Internet access. I'm using Windows XP SP3. As it was suggested here http://forums.speedguide.net/showthread.php?t=209167 , I tried to enable "Allow local LAN Access" but it doesn't work. I also tried a second solution - deleting entry using "route" command, but it didn't help. I used "route delete 192.168.100.222". It's a third day of my attempts to solve this issue and I don't have an idea what else to do. I'm not very experienced in VPN stuff, but I know something about networking. Basing on my knowledge, I think that it's theoretically possible to achieve Internet access using my local network and only corporate stuff to be routed using VPN connection. I think that theoretically this should look like this: every IP being inside by corporation - VPN interface IP every other IP - my ethernet interface I've tried many possibilities of how to change those routes, but neither of them work. I'd really appreciate any help. My route configuration before connecting to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 192.168.101.254 192.168.100.222 10 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 1 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 3 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 192.168.101.254. =========================================================================== My route configuration after connection to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport 0x170006 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 10.251.6.1 10.251.6.51 1 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.0 255.255.255.0 10.251.6.1 10.251.6.51 10 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.1.150.10 255.255.255.255 192.168.101.254 192.168.100.222 1 10.251.6.0 255.255.255.0 10.251.6.51 10.251.6.51 20 10.251.6.51 255.255.255.255 127.0.0.1 127.0.0.1 20 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 10.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 10 192.168.100.0 255.255.254.0 10.251.6.1 10.251.6.51 10 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 10 213.158.197.124 255.255.255.255 192.168.101.254 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 30 224.0.0.0 240.0.0.0 10.251.6.51 10.251.6.51 20 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 10 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 10.251.6.1. ===========================================================================

    Read the article

  • Restarted computer, now wireless and Visual Studio is broken

    - by Earlz
    I installed the new update for TortoiseSVN which requires a restart. Upon restarting a lot of things broke. I'm currently running a virus scan, but what would cause this? Among the things that no longer work is Visual Studio. It now says "Invalid License Data. A reinstall is required" and my wireless internet does not work. When I go to connect to my network it will say "Can not connect" and then when I diagnose the problem it says "The connection to accesspoint-name was cancelled" (and yes, canceled is misspelt like that) What could have caused this? My computer did not install any updates or anything like that upon restarting and it was running fine before I restarted it.

    Read the article

  • My D-Link Router is only allowing one connection

    - by Blaze
    My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

    Read the article

  • if an outdated, vulnerable but clean Windows machine is connected to network behind router, can it be detected and attacked?

    - by EndangeringSpecies
    suppose the machine is clean of all malware but not in any sense updated, patched, secured etc. Suppose I connect it to the internet from behind wireless router with the intent of using it only on a few trusted sites and only there. Or, for the sake of argument, maybe I wouldn't do any browsing at all, just let it sit there connected to the network. This is all happening in a residential situation with cable internet. In this situation can a remote attacker somehow detect the fact that the machine is connected to the internet and try connecting to do an exploit?

    Read the article

  • Mac OS X: pushing all traffic through a VMWare VM

    - by bj99
    I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

    Read the article

  • How to connect Android phone to a Wifi network using PPPoE?

    - by Slavo
    I have an ISP at home, which provides me with a PPPoE connection. My router supports that and I've configured it to autoconnect periodically, so I don't have to type my username and password each time. When I connect to the Wireless router from the PC, I have internet and everything works fine. However, when I do so using my Android phone, there's no internet connection on the phone. It connects to the router, but I cannot open any web page. How can I enable internet access from such an ISP on my phone? Is it something in the router setup? The router is Linksys WRT54GL.

    Read the article

  • Routing Traffic on Ubuntu to give Raspberry PI Internet Access

    - by Scruffers
    I'm hoping someone can point me in the right direction for setting up my Linux (Ubuntu 12.04) box to route traffic from eth0 to wlan0. I'll try and explain the problem I am trying to solve: I currently have two separate networks: [RaspberryPi/eth0] 192.168.2.2 / 255.255.255.0 ^ | v [Ubuntu/eth0] 192.168.2.1 / 255.255.255.0 And: [Ubuntu/wlan0] 192.168.1.100 / 255.255.255.0 ^ | v [ADSL router] 192.168.1.1 / 255.255.255.0 So currently if I want to access the RaspberryPI I can SSH from the Ubuntu box to the PI. And if I want to use the Internet, I have full access from the Ubuntu box, but nothing from the RaspberryPI - the two networks are partitioned. What I would like to do is configure things so that the RaspberryPI has Internet access via the Ubuntu box and out to the Internet. I tried to create a bridge, but got the message "wlan0: operation not supported" (wireless chipset is Ralink RT3062). I'm sure giving the Raspberry PI Internet access should be easy to do in this configuration, but I am a bit lost - can someone point me in the right direction please?

    Read the article

  • How to connect a wifi router to a cable modem router?

    - by DavidD
    Here's the thing: I have a cable modem router (Thomson TCW710) with wifi-g that I rent from my cable company. I would like to use a wireless-n router (D-Link DIR-655, that I received for free) with it in order to take advantage of the faster wifi. I basically need advice on how to architecture my home network with these two beasts. What configuration should I need to apply on my old and new router to make it all work? The two routers will of course be connected together with a RJ-45 cable.

    Read the article

  • bluetooth doesn't recognize mouse (and other devices)... sometimes

    - by Angelo
    I have a problem with bluetooth with Vista, running on my MacBook. It often doesn't recognize my wireless Magic Mouse. And I saw that it even doesn't seem to start as the pictogram in the task-bar isn't there most of the time I run Vista. But I'm only an Apple-nerd, so I don't know to much about this issue on Vista. When reinstalling Boothcamp or other updates, then once in a while bluetooth recognizes my own mouse (and other devices from some neighbours... so that implicates that the problem must be the bluetooth function in the first place, not my mouse.) Is there some update for the bluetooth application? Angelo

    Read the article

  • Why would my mouse pointer be jerky when it can't get a signal from my router?

    - by izb
    I've got a fairly new PC but when moving the mouse across the screen, the pointer jerks as if the PC is freezing momentarily every second or so. Strangely, this only seems to happen if the signal from the wifi router is bad. If I move the PC closer to the router to get a full signal, it's fine. It also seems to affect the keyboard; Opening notepad and holding down a key shows the same momentary freezes. -- Update: It's a logitech wireless mouse, and a wired USB logitech keyboard.

    Read the article

  • Sharing wireless internet connection between 2 Ubuntu 10.04 systems using cross-over cable

    - by Gary
    I have a Lenovo T60 with Ubuntu 10.04 connected with a cross-over cable to a Dell Vostro 1400, also running Ubuntu 10.04. My internet is coming into the Lenovo through an external wireless antennae, and I want to share the internet with the Dell. On the Lenovo: eth0 connection has IPv4 Settings 'Shared to other computers' I can ping the Dell (10.42.43.10) successfully I can use mtr to trace to www.google.com successfully On the Dell: eth0 connection has IPv4 Settings 'Automatic DHCP' I can ping the Lenovo (10.42.43.1) successfully when I use mtr to trace to www.google.com, I can only reach 10.42.43.1 I must be missing some setting, but cannot see what it is; can anyone help me?

    Read the article

  • Can't ping IPs for devices not part of Windows Domain

    - by GiddyUpHorsey
    I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

    Read the article

  • Linksys Wireless-N ADSL2 WAG160N losing connection

    - by Sam1973
    It seems that recently I have to turn off and then turn on my router every time I want to connect my laptop(s) to the internet. This is what's happens: When I want to connect to the internet on my laptop, the network icon in the system tray states that I am connected to the wireless network but there's no "internet connectivity" I turn off the router and turn it back on and then I can connect to the internet. I am sure there is something that needs to be done. Can you guys point me to the right direction?

    Read the article

  • Routers with USB plug to connect external storage

    - by sixtyfootersdude
    I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

    Read the article

  • How do I get a 300Mbps connection over 802.11n?

    - by Daniel Schaffer
    I just bought a new wireless setup, consisting of a Cisco E2000 router, Edimax 7718un USB adapter for my laptop and an Edimax 7728in PCI adapter for my HTPC (which isn't in a location I can run cat5 to). I have to stay in the 2.4GHz band because I have an iPhone and a Wii that will need to connect. I'm aware that 11g devices will drop speeds for 11n devices, but they aren't connected yet. The fastest connection I've been able to get, with the router within 5 feet of either the laptop or HTPC is 144Mbps. The router has settings for "20MHz" and "Auto (20 MHz or 40Mhz) channel width, which I've set to the "Auto" setting. I haven't been able to find anything similar for either of the Edimax adapters. This is the first I've dealt with 11n, so I'm not even sure what else could be causing a problem. How do I get up to 300Mbps, or at least a fair bit closer?

    Read the article

< Previous Page | 126 127 128 129 130 131 132 133 134 135 136 137  | Next Page >